Commit graph

661,541 commits

Author SHA1 Message Date
Jason Gunthorpe
1930c28651 fpga zynq: Add missing \n to messages
Function dev_err doesn't add a newline at the end of the string. This will
lead to a hard to read kernel log.

Signed-off-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com>
Reviewed-by: Moritz Fischer <moritz.fischer@ettus.com>
Reviewed-by: Matthias Brugger <mbrugger@suse.com>
Acked-by: Alan Tull <atull@opensource.altera.com>
2016-11-29 15:51:45 -06:00
Jason Gunthorpe
a0e1b61858 fpga: Add COMPILE_TEST to all drivers
Like Zynq the Altera drivers compile fine on x86 and others too,
so make it easier to compile test this stuff.

A10 requires REGMAP_MMIO to compile, so be explicit rather than
relying on it via ARCH_SOCFPGA.

Signed-off-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com>
Acked-by: Alan Tull <atull@opensource.altera.com>
2016-11-29 15:51:44 -06:00
Chuck Lever
3a72dc771c xprtrdma: Relocate connection helper functions
Clean up: Disentangle connection helpers from RPC-over-RDMA reply
decoding functions.

Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2016-11-29 16:45:44 -05:00
Chuck Lever
c351f94387 xprtrdma: Update dprintk in rpcrdma_count_chunks
Clean up: offset and handle should be zero-filled, just like in the
chunk encoders.

Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2016-11-29 16:45:44 -05:00
Chuck Lever
2f6922ca33 xprtrdma: Shorten QP access error message
Clean up: The convention for this type of warning message is not to
show the function name or "RPC:       ".

Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2016-11-29 16:45:44 -05:00
Chuck Lever
6d6bf72de9 xprtrdma: Squelch "max send, max recv" messages at connect time
Clean up: This message was intended to be a dprintk, as it is on the
server-side.

Fixes: 87cfb9a0c8 ('xprtrdma: Client-side support for ...')
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2016-11-29 16:45:44 -05:00
Chuck Lever
289400af2b xprtrdma: Update documenting comment
Clean up: If reset fails, FRMRs are no longer abandoned, rather
they are released immediately. Update the comment to reflect this.

Fixes: 2ffc871a57 ('xprtrdma: Release orphaned MRs immediately')
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2016-11-29 16:45:44 -05:00
Chuck Lever
a100fda1a2 xprtrdma: Refactor FRMR invalidation
Clean up: After some recent updates, clarifications can be made to
the FRMR invalidation logic.

- Both the remote and local invalidation case mark the frmr INVALID,
  so make that a common path.

- Manage the WR list more "tastefully" by replacing the conditional
  that discriminates between the list head and ->next pointers.

- Use mw->mw_handle in all cases, since that has the same value as
  f->fr_mr->rkey, and is already in cache.

Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2016-11-29 16:45:44 -05:00
Chuck Lever
48016dce46 xprtrdma: Avoid calls to ro_unmap_safe()
Micro-optimization: Most of the time, calls to ro_unmap_safe are
expensive no-ops. Call only when there is work to do.

Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2016-11-29 16:45:44 -05:00
Chuck Lever
109b88ab9d xprtrdma: Address coverity complaint about wait_for_completion()
> ** CID 114101:  Error handling issues  (CHECKED_RETURN)
> /net/sunrpc/xprtrdma/verbs.c: 355 in rpcrdma_create_id()

Commit 5675add36e ("RPC/RDMA: harden connection logic against
missing/late rdma_cm upcalls.") replaced wait_for_completion() calls
with these two call sites.

The original wait_for_completion() calls were added in the initial
commit of verbs.c, which was commit c56c65fb67 ("RPCRDMA: rpc rdma
verbs interface implementation"), but these returned void.

rpcrdma_create_id() is called by the RDMA connect worker, which
probably won't ever be interrupted. It is also called by
rpcrdma_ia_open which is in the synchronous mount path, and ^C is
possible there.

Add a bit of logic at those two call sites to return if the waits
return ERESTARTSYS.

Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2016-11-29 16:45:44 -05:00
Chuck Lever
ae09531d3c SUNRPC: Proper metric accounting when RPC is not transmitted
I noticed recently that during an xfstests on a krb5i mount, the
retransmit count for certain operations had gone negative, and the
backlog value became unreasonably large. I recall that Andy has
pointed this out to me in the past.

When call_refresh fails to find a valid credential for an RPC, the
RPC exits immediately without sending anything on the wire. This
leaves rq_ntrans, rq_xtime, and rq_rtt set to zero.

The solution for om_queue is to not add the to RPC's running backlog
queue total whenever rq_xtime is zero.

For om_ntrans, it's a bit more difficult. A zero rq_ntrans causes
om_ops to become larger than om_ntrans. The design of the RPC
metrics API assumes that ntrans will always be equal to or larger
than the ops count. The result is that when an RPC fails to find
credentials, the RPC operation's reported retransmit count, which is
computed in user space as the difference between ops and ntrans,
goes negative.

Ideally the kernel API should report a separate retransmit and
"exited before initial transmission" metric, so that user space can
sort out the difference properly.

To avoid kernel API changes and changes to the way rq_ntrans is used
when performing transport locking, account for untransmitted RPCs
so that om_ntrans keeps up with om_ops: always add one or more to
om_ntrans.

Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2016-11-29 16:45:44 -05:00
Chuck Lever
5e9fc6a06b xprtrdma: Support for SG_GAP devices
Some devices (such as the Mellanox CX-4) can register, under a
single R_key, a set of memory regions that are not contiguous. When
this is done, all the segments in a Reply list, say, can then be
invalidated in a single LocalInv Work Request (or via Remote
Invalidation, which can invalidate exactly one R_key when completing
a Receive).

This means a single FastReg WR is used to register, and one or zero
LocalInv WRs can invalidate, the memory involved with RDMA transfers
on behalf of an RPC.

In addition, xprtrdma constructs some Reply chunks from three or
more segments. By registering them with SG_GAP, only one segment
is needed for the Reply chunk, allowing the whole chunk to be
invalidated remotely.

Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2016-11-29 16:45:44 -05:00
Chuck Lever
8d38de6564 xprtrdma: Make FRWR send queue entry accounting more accurate
Verbs providers may perform house-keeping on the Send Queue during
each signaled send completion. It is necessary therefore for a verbs
consumer (like xprtrdma) to occasionally force a signaled send
completion if it runs unsignaled most of the time.

xprtrdma does not require signaled completions for Send or FastReg
Work Requests, but does signal some LocalInv Work Requests. To
ensure that Send Queue house-keeping can run before the Send Queue
is more than half-consumed, xprtrdma forces a signaled completion
on occasion by counting the number of Send Queue Entries it
consumes. It currently does this by counting each ib_post_send as
one Entry.

Commit c9918ff56d ("xprtrdma: Add ro_unmap_sync method for FRWR")
introduced the ability for frwr_op_unmap_sync to post more than one
Work Request with a single post_send. Thus the underlying assumption
of one Send Queue Entry per ib_post_send is no longer true.

Also, FastReg Work Requests are currently never signaled. They
should be signaled once in a while, just as Send is, to keep the
accounting of consumed SQEs accurate.

While we're here, convert the CQCOUNT macros to the currently
preferred kernel coding style, which is inline functions.

Fixes: c9918ff56d ("xprtrdma: Add ro_unmap_sync method for FRWR")
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2016-11-29 16:45:44 -05:00
Chuck Lever
62aee0e302 xprtrdma: Cap size of callback buffer resources
When the inline threshold size is set to large values (say, 32KB)
any NFSv4.1 CB request from the server gets a reply with status
NFS4ERR_RESOURCE.

Looks like there are some upper layer assumptions about the maximum
size of a reply (for example, in process_op). Cap the size of the
NFSv4 client's reply resources at a page.

Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2016-11-29 16:45:44 -05:00
Jonathan Corbet
d6ba7a9c8b doc: Sphinxify the tracepoint docbook
Convert the tracepoint docbook template to RST and add it to the core-api
manual.  No changes to the actual text beyond the mechanical formatting
conversion.

Cc: Jason Baron <jbaron@redhat.com>
Cc: William Cohen <wcohen@redhat.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2016-11-29 14:44:23 -07:00
Jonathan Corbet
8da3dc5334 doc: debugobjects: actually pull in the kerneldoc comments
Add the appropriate markup to get the kerneldoc comments out of
lib/debugobjects.c that have never seen the light of day until now.

A logical next step, left for the reader at the moment, is to move the
function descriptions *out* of debug-objects.rst and into the kerneldoc
comments themselves.

Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2016-11-29 14:44:14 -07:00
Jonathan Corbet
93dc3a112b doc: Convert the debugobjects DocBook template to sphinx
A couple of the most minor heading tweaks, otherwise no changes to the text
itself beyond the mechanical conversion.

Note that the inclusion of the kerneldoc comments from the source has never
worked, since exported symbols were asked for and none of those functions
are exported to modules.  It doesn't work here either :)

Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2016-11-29 14:44:04 -07:00
Naveen Kaje
cc9086e772 i2c: qup: support SMBus block read
I2C QUP driver relies on SMBus emulation support from the framework.
To handle SMBus block reads, the driver should check I2C_M_RECV_LEN
flag and should read the first byte received as the message length.

The driver configures the QUP hardware to read one byte. Once the
message length is known from this byte, the QUP hardware is configured
to read the rest.

Signed-off-by: Naveen Kaje <nkaje@codeaurora.org>
Signed-off-by: Austin Christ <austinwc@codeaurora.org>
Reviewed-by: Sricharan R <sricharan@codeaurora.org>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2016-11-29 22:43:38 +01:00
Naveen Kaje
515da74698 i2c: qup: add ACPI support
Add support to get the device parameters from ACPI. Assume
that the clocks are managed by firmware.

Signed-off-by: Naveen Kaje <nkaje@codeaurora.org>
Signed-off-by: Austin Christ <austinwc@codeaurora.org>
Reviewed-by: Sricharan R <sricharan@codeaurora.org>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2016-11-29 22:42:47 +01:00
Jonathan Corbet
0bb33e25e5 docs: Move the 802.11 guide into the driver-api manual
Put this documentation with the other driver docs and try to keep the top
level reasonably clean.

Cc: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2016-11-29 14:41:49 -07:00
Takashi Iwai
4763601a56 ALSA: usb-audio: Fix bogus error return in snd_usb_create_stream()
The function returns -EINVAL even if it builds the stream properly.
The bogus error code sneaked in during the code refactoring, but it
wasn't noticed until now since the returned error code itself is
ignored in anyway.  Kill it here, but there is no behavior change by
this patch, obviously.

Fixes: e5779998bf ('ALSA: usb-audio: refactor code')
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2016-11-29 22:28:40 +01:00
Andrej Krutak
fc90172ba2 ALSA: line6: Claim pod x3 usb data interface
Userspace apps have to claim USB interfaces before using endpoints in
them (drivers/usb/core/devio.c:checkintf()). It's a lock mechanism so
that two "drivers" don't steal data from each other. Kernel drivers don't
have to claim interfaces to work - but they should, to lock out userspace.

While there, fix line6_properties struct to match checkpatch.pl.

Signed-off-by: Andrej Krutak <dev@andree.sk>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2016-11-29 22:16:14 +01:00
Greg Kroah-Hartman
0e0d3d2c5f driver core: test_async: fix up typo found by 0-day
0-day pointed out a typo in the platform device registration logic, so
fix it.

Reported-by: kbuild test robot <fengguang.wu@intel.com>
Cc: Guenter Roeck <groeck@chromium.org>
Cc: Dmitry Torokhov <dtor@chromium.org>
Cc: Julia Lawall <julia.lawall@lip6.fr>
Cc: Thierry Escande <thierry.escande@collabora.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-11-29 22:06:42 +01:00
Colin Ian King
5bcf2a921b staging: unisys: fix spelling mistake of "outstanding"
Trivial fix to spelling mistake "oustanding" to "outstanding".

Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-11-29 22:02:50 +01:00
Dawid Kurek
feebd0ed7e staging: gdm724x: Remove one blank line in sequence
Remove one blank line in sequence of two empty lines.

Signed-off-by: Dawid Kurek <dawikur@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-11-29 21:57:15 +01:00
Dawid Kurek
95703a7829 staging: gdm724x: Align parameters to parenthesis
Align parameters to open parenthesis.

Signed-off-by: Dawid Kurek <dawikur@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-11-29 21:57:14 +01:00
Dan Carpenter
d28fb1ffba staging: sm750fb: fix a type issue in sm750_set_chip_type()
"revId" needs to be unsigned because we use it to test:

	if (revId == SM750LE_REVISION_ID) {

and SM750LE_REVISION_ID is ((unsigned char )0xfe).

Fixes: 81dee67e21 ("staging: sm750fb: add sm750 to staging")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-11-29 21:57:14 +01:00
Sudip Mukherjee
4e0447cdaf staging: sm750fb: update license
The driver was actually released with BSD license. It also gained GPL
when it was submitted to be included in the kernel.

Cc: Teddy Wang <teddy.wang@siliconmotion.com>
Cc: gzhou1 <guojian.zhou@windriver.com>
Signed-off-by: Sudip Mukherjee <sudip.mukherjee@codethink.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-11-29 21:57:14 +01:00
Sergio Paracuellos
3e3d96c156 staging: slicoss: remove UPDATE_STATS_GB macro and inline code
This patch removes UPDATE_STATS_GB macro in slic.h header file
and just inline code. This improve readability.

Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-11-29 21:57:14 +01:00
Sergio Paracuellos
4dc0e9832b staging: slicoss: remove not used UPDATE_STATS macro
This patch remove UPDATE_STATS macro from
header slic.h which is not being used.

Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-11-29 21:57:14 +01:00
Yamanappagouda Patil
e0d648151d Staging: ks7010: Fixed {} brace warnings for single statement blocks.
Fixed checkpatch.pl warnings related to {} brace warnings for single
statement blocks.

Signed-off-by: Yamanappagouda Patil <goudapatilk@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-11-29 21:57:14 +01:00
Jason Litzinger
7e47629e7a staging: most: Eliminate usage of symbolic permissions
Fix checkpatch warnings regarding the use of symbolic permissions.

Where the MOST_CHANNEL_ATTR macro is used, convert to octal
permissions over symbolic.

Where _ATTR is used directly, replace with _ATTR_RW/_ATTR_WO and
update the show/store function names appropriately.

Signed-off-by: Jason Litzinger <jlitzingerdev@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-11-29 21:57:14 +01:00
Chris Wilson
a53ca63502 drm: Protect fb_helper list manipulation with a mutex
Though we only walk the kernel_fb_helper_list inside a panic (or single
thread debugging), we still need to protect the list manipulation on
creating/removing a framebuffer device in order to prevent list
corruption.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: http://patchwork.freedesktop.org/patch/msgid/20161129120217.7344-3-chris@chris-wilson.co.uk
2016-11-29 15:52:32 -05:00
Chris Wilson
64e94407fb drm: Pull together probe + setup for drm_fb_helper
drm_fb_helper_probe_connector_modes() is always called before
drm_setup_crtcs(), so just move the call into drm_setup_crtcs for a
small bit of code compaction.

Note that register_framebuffer will do a modeset (when fbcon is enabled)
and hence must be moved out of the critical section. A follow-up patch
will add new locking for the fb list, hence move all the related
registration code together.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Daniel Vetter <daniel.vetter@intel.com>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: http://patchwork.freedesktop.org/patch/msgid/20161129120217.7344-2-chris@chris-wilson.co.uk
2016-11-29 15:52:32 -05:00
Chris Wilson
966a6a13c6 drm: Hold mode_config.lock to prevent hotplug whilst setting up crtcs
The fb_helper->connector_count is modified when a new connector is
constructed following a hotplug event (e.g. DP-MST). This causes trouble
for drm_setup_crtcs() and friends that assume that fb_helper is
constant:

[ 1250.872997] BUG: KASAN: slab-out-of-bounds in drm_setup_crtcs+0x320/0xf80 at addr ffff88074cdd2608
[ 1250.873020] Write of size 40 by task kworker/u8:3/480
[ 1250.873039] CPU: 2 PID: 480 Comm: kworker/u8:3 Tainted: G     U          4.9.0-rc6+ #285
[ 1250.873043] Hardware name:                  /NUC6i3SYB, BIOS SYSKLi35.86A.0024.2015.1027.2142 10/27/2015
[ 1250.873050] Workqueue: events_unbound async_run_entry_fn
[ 1250.873056]  ffff88070f9d78f0 ffffffff814b72aa ffff88074e40c5c0 ffff88074cdd2608
[ 1250.873067]  ffff88070f9d7918 ffffffff8124ff3c ffff88070f9d79b0 ffff88074cdd2600
[ 1250.873079]  ffff88074e40c5c0 ffff88070f9d79a0 ffffffff812501e4 0000000000000005
[ 1250.873090] Call Trace:
[ 1250.873099]  [<ffffffff814b72aa>] dump_stack+0x67/0x9d
[ 1250.873106]  [<ffffffff8124ff3c>] kasan_object_err+0x1c/0x70
[ 1250.873113]  [<ffffffff812501e4>] kasan_report_error+0x204/0x4f0
[ 1250.873120]  [<ffffffff81698df0>] ? drm_dev_printk+0x140/0x140
[ 1250.873127]  [<ffffffff81250ac3>] kasan_report+0x53/0x60
[ 1250.873134]  [<ffffffff81688b40>] ? drm_setup_crtcs+0x320/0xf80
[ 1250.873142]  [<ffffffff8124f18e>] check_memory_region+0x13e/0x1a0
[ 1250.873147]  [<ffffffff8124f5f3>] memset+0x23/0x40
[ 1250.873154]  [<ffffffff81688b40>] drm_setup_crtcs+0x320/0xf80
[ 1250.873161]  [<ffffffff810be7c5>] ? wake_up_q+0x45/0x80
[ 1250.873169]  [<ffffffff81b0c180>] ? mutex_lock_nested+0x5a0/0x5a0
[ 1250.873176]  [<ffffffff8168a0e6>] drm_fb_helper_initial_config+0x206/0x7a0
[ 1250.873183]  [<ffffffff81689ee0>] ? drm_fb_helper_set_par+0x90/0x90
[ 1250.873303]  [<ffffffffa0b68690>] ? intel_fbdev_fini+0x140/0x140 [i915]
[ 1250.873387]  [<ffffffffa0b686b2>] intel_fbdev_initial_config+0x22/0x40 [i915]
[ 1250.873391]  [<ffffffff810b50ff>] async_run_entry_fn+0x7f/0x270
[ 1250.873394]  [<ffffffff810a64b0>] process_one_work+0x3d0/0x960
[ 1250.873398]  [<ffffffff810a641d>] ? process_one_work+0x33d/0x960
[ 1250.873401]  [<ffffffff810a60e0>] ? max_active_store+0xf0/0xf0
[ 1250.873406]  [<ffffffff810f6f9d>] ? do_raw_spin_lock+0x10d/0x1a0
[ 1250.873413]  [<ffffffff810a767d>] worker_thread+0x8d/0x840
[ 1250.873419]  [<ffffffff810a75f0>] ? create_worker+0x2e0/0x2e0
[ 1250.873426]  [<ffffffff810b0454>] kthread+0x194/0x1c0
[ 1250.873432]  [<ffffffff810b02c0>] ? kthread_park+0x60/0x60
[ 1250.873438]  [<ffffffff810f095d>] ? trace_hardirqs_on+0xd/0x10
[ 1250.873446]  [<ffffffff810b02c0>] ? kthread_park+0x60/0x60
[ 1250.873453]  [<ffffffff810b02c0>] ? kthread_park+0x60/0x60
[ 1250.873457]  [<ffffffff81b12277>] ret_from_fork+0x27/0x40
[ 1250.873460] Object at ffff88074cdd2608, in cache kmalloc-32 size: 32

However, when holding the mode_config.lock around the fb_helper, we have
to be careful of any callbacks that may reenter the fb_helper and so try
to reacquire the mode_config.lock (e.g. register_framebuffer). To avoid
the mutex recursion, we have to rearrange the sequence to move the
registration into the caller outside of the mode_config.lock.

v2: drop the 1; following the lockdep assertion inside the for(;;), I
anticipated an error that doesn't happen!

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=98826
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Daniel Vetter <daniel@ffwll.ch>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: http://patchwork.freedesktop.org/patch/msgid/20161129120217.7344-1-chris@chris-wilson.co.uk
2016-11-29 15:52:32 -05:00
Fan Yong
3ce173a162 staging: lustre: obd: reserve connection flag OBD_CONNECT_FLAGS2
This is a feature for the client and server to use
obd_connect_flags2 to communicate future feature flags. The
client should set this flag whenever any flags in that field
are requested, and the server should mask unsupported features
from this field (assuming it understands OBD_CONNECT_FLAGS2).
When checking if an OBD_CONNECT2_xxxx feature is supported,
the client/server needs to firstly check if OBD_CONNECT_FLAGS2
is supported, since this field is also beyond the end of the
old obd_connect_data.

Land the connection flags to upstream client earlier for reserving
the slot to avoid potential conflict with others.

Signed-off-by: Fan Yong <fan.yong@intel.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-7543
Reviewed-on: http://review.whamcloud.com/17647
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Reviewed-by: Patrick Farrell <paf@cray.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-11-29 21:50:38 +01:00
Fan Yong
59b6693aea staging: lustre: obd: reserve connection flag OBD_CONNECT_OBDOPACK
The connection flag OBD_CONNECT_OBDOPACK will be used for the
following the patch: LU-4215 optimize OUT protocol
http://review.whamcloud.com/15336

Land the connection flags to upstream client earlier for reserving
the slot to avoid potential conflict with others.

Signed-off-by: Fan Yong <fan.yong@intel.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-7543
Reviewed-on: http://review.whamcloud.com/17646
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Reviewed-by: Patrick Farrell <paf@cray.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-11-29 21:50:38 +01:00
Fan Yong
0b83bc1675 staging: lustre: obd: reserve connection flag OBD_CONNECT_LOCK_AHEAD
The connection flag OBD_CONNECT_LOCK_AHEAD will be used for the
following the patch: LU-6917 LDLM lock ahead
http://review.whamcloud.com/13564

Land the connection flags to upstream client earlier for reserving
the slot to avoid potential conflict with others.

Signed-off-by: Fan Yong <fan.yong@intel.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-7543
Reviewed-on: http://review.whamcloud.com/17645
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Reviewed-by: Patrick Farrell <paf@cray.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-11-29 21:50:38 +01:00
Fan Yong
9ed8e66a43 staging: lustre: obd: reserve connection flag OBD_CONNECT_SUBTREE
The connection flag OBD_CONNECT_SUBTREE will be used for the
following the patch: LU-28 mounting of filesystem from MDS
http://review.whamcloud.com/5007

Land the connection flags to master earlier for reserving the
slot to avoid potential conflict with others.

Signed-off-by: Fan Yong <fan.yong@intel.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-7543
Reviewed-on: http://review.whamcloud.com/17644
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Reviewed-by: Patrick Farrell <paf@cray.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-11-29 21:50:38 +01:00
Andreas Dilger
986dbb586f staging: lustre: ldlm: change "int" to proper enum type
Fix users of flags that were using "int" instead of named enum.
Rename some "flags" variables to distinguish between different flags.

Signed-off-by: Andreas Dilger <andreas.dilger@intel.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-6142
Reviewed-on: http://review.whamcloud.com/15300
Reviewed-on: http://review.whamcloud.com/15301
Reviewed-by: James Simmons <uja.ornl@yahoo.com>
Reviewed-by: Bob Glossman <bob.glossman@intel.com>
Reviewed-by: frank zago <fzago@cray.com>
Reviewed-by: Dmitry Eremin <dmitry.eremin@intel.com>
Reviewed-by: John L. Hammond <john.hammond@intel.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-11-29 21:45:16 +01:00
Andreas Dilger
581b75c250 staging: lustre: ldlm: rename LDLM_CANCEL_* flags
Rename LDLM_CANCEL_* flags (used with enum ldlm_lru_flags) to
LDLM_LRU_FLAGS_* to avoid confusion with enum ldlm_cancel_flags.

Signed-off-by: Andreas Dilger <andreas.dilger@intel.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-6142
Reviewed-on: http://review.whamcloud.com/15300
Reviewed-on: http://review.whamcloud.com/15301
Reviewed-by: James Simmons <uja.ornl@yahoo.com>
Reviewed-by: Bob Glossman <bob.glossman@intel.com>
Reviewed-by: frank zago <fzago@cray.com>
Reviewed-by: Dmitry Eremin <dmitry.eremin@intel.com>
Reviewed-by: John L. Hammond <john.hammond@intel.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-11-29 21:45:16 +01:00
Andreas Dilger
394a9726d2 staging: lustre: ldlm: remove ldlm_wire_policy_data_t typedef usage from code
Replace usage of ldlm_wire_policy_data_t with named enums
to conform to upstream coding style.

Signed-off-by: Andreas Dilger <andreas.dilger@intel.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-6142
Reviewed-on: http://review.whamcloud.com/15300
Reviewed-on: http://review.whamcloud.com/15301
Reviewed-by: James Simmons <uja.ornl@yahoo.com>
Reviewed-by: Bob Glossman <bob.glossman@intel.com>
Reviewed-by: frank zago <fzago@cray.com>
Reviewed-by: Dmitry Eremin <dmitry.eremin@intel.com>
Reviewed-by: John L. Hammond <john.hammond@intel.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-11-29 21:45:15 +01:00
Andreas Dilger
2885bdeae6 staging: lustre: ldlm: remove ldlm_side_t typedef usage from code
Replace usage of ldlm_side_t with named enums
to conform to upstream coding style.

Signed-off-by: Andreas Dilger <andreas.dilger@intel.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-6142
Reviewed-on: http://review.whamcloud.com/15300
Reviewed-on: http://review.whamcloud.com/15301
Reviewed-by: James Simmons <uja.ornl@yahoo.com>
Reviewed-by: Bob Glossman <bob.glossman@intel.com>
Reviewed-by: frank zago <fzago@cray.com>
Reviewed-by: Dmitry Eremin <dmitry.eremin@intel.com>
Reviewed-by: John L. Hammond <john.hammond@intel.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-11-29 21:45:15 +01:00
Andreas Dilger
3dea347819 staging: lustre: ldlm: remove ldlm_policy_data_t typedef usage from code
Replace usage of ldlm_policy_data_t with named enums
to conform to upstream coding style.

Signed-off-by: Andreas Dilger <andreas.dilger@intel.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-6142
Reviewed-on: http://review.whamcloud.com/15300
Reviewed-on: http://review.whamcloud.com/15301
Reviewed-by: James Simmons <uja.ornl@yahoo.com>
Reviewed-by: Bob Glossman <bob.glossman@intel.com>
Reviewed-by: frank zago <fzago@cray.com>
Reviewed-by: Dmitry Eremin <dmitry.eremin@intel.com>
Reviewed-by: John L. Hammond <john.hammond@intel.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-11-29 21:45:15 +01:00
Dan Carpenter
5bba129eaa staging: lustre: lnet: memory corruption in selftest
We want sizeof(struct lstcon_node) but instead we're getting the sizeof
a pointer.

Fixes: 8d78f0f2ba ("staging: lustre: lnet: cleanup some of the > 80 line issues")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-11-29 21:44:01 +01:00
Dan Carpenter
7966f2d22e staging: lustre/ptlrpc: small leak on allocation failure
We should free "desc" before returning NULL.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-11-29 21:44:01 +01:00
Waiman Long
7edd7e82b9 console: Move userspace I/O out of console_lock to fix lockdep warning
When running certain workload on a debug kernel with lockdep turned on,
a ppc64 kvm guest could sometimes hit the following lockdep warning:

  [ INFO: possible circular locking dependency detected ]
  Possible unsafe locking scenario:

        CPU0                    CPU1
        ----                    ----
   lock(&mm->mmap_sem);
                                lock(console_lock);
                                lock(&mm->mmap_sem);
   lock(cpu_hotplug.lock);

  *** DEADLOCK ***

Looking at the console code, the console_lock-->mmap_sem scenario will
only happen when reading or writing the console unicode map leading to
a page fault.

To break this circular locking dependency, all the userspace I/O
operations in consolemap.c are now moved outside of the console_lock
critical sections so that the mmap_sem won't be acquired when holding
the console_lock.

Signed-off-by: Waiman Long <longman@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-11-29 21:42:40 +01:00
Daniel Wagner
fab82cb3f1 firmware: move fw_state_is_done() into UHM section
fw_state_is_done() is only used for UHM so moved into that section.

Cc: Ming Lei <ming.lei@canonical.com>
Signed-off-by: Daniel Wagner <daniel.wagner@bmw-carit.de>
Acked-by: Luis R. Rodriguez <mcgrof@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-11-29 21:28:54 +01:00
Daniel Wagner
5b02962494 firmware: do not use fw_lock for fw_state protection
fw_lock is to use to protect 'corner cases' inside firmware_class. It
is not exactly clear what those corner cases are nor what it exactly
protects. fw_state can be used without needing the fw_lock to protect
its state transition and wake ups.

fw_state is holds the state in status and the completion is used to
wake up all waiters (in this case that is the user land helper so only
one). This operation has to be 'atomic' to avoid races.  We can do this
by using swait which takes care we don't miss any wake up.

We use also swait instead of wait because don't need all the additional
features wait provides.

Note there some more cleanups possible after with this change. For
example for !CONFIG_FW_LOADER_USER_HELPER we don't check for the state
anymore.  Let's to this in the next patch instead mingling to many
changes into this one. And yes you get a gcc warning "‘__fw_state_check’
defined but not used [-Wunused-function] code." for the time beeing.

Cc: Ming Lei <ming.lei@canonical.com>
Signed-off-by: Daniel Wagner <daniel.wagner@bmw-carit.de>
Acked-by: Luis R. Rodriguez <mcgrof@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-11-29 21:28:54 +01:00
Daniel Wagner
0430cafcc4 firmware: drop bit ops in favor of simple state machine
We track the state of the firmware loading with bit ops.  Since the
state machine has only a few states and they are all mutual exclusive
there are only a few simple state transition we can model this simplify.

	   UNKNOWN -> LOADING -> DONE | ABORTED

Because we don't use any bit ops on fw_state::status anymore we are able
to change the data type to enum fw_status and update the function
arguments accordingly.

READ_ONCE() and WRITE_ONCE() are propably not needed because there are a
lot of load and stores around fw_st->status. But let's make it explicit
and not be sorry later.

Cc: Ming Lei <ming.lei@canonical.com>
Signed-off-by: Daniel Wagner <daniel.wagner@bmw-carit.de>
Acked-by: Luis R. Rodriguez <mcgrof@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-11-29 21:28:54 +01:00