Commit graph

661,541 commits

Author SHA1 Message Date
Josh Zimmerman
26a137e31f tpm_tis: Check return values from get_burstcount.
If the TPM we're connecting to uses a static burst count, it will report
a burst count of zero throughout the response read. However, get_burstcount
assumes that a response of zero indicates that the TPM is not ready to
receive more data. In this case, it returns a negative error code, which
is passed on to tpm_tis_{write,read}_bytes as a u16, causing
them to read/write far too many bytes.

This patch checks for negative return codes and bails out from recv_data
and tpm_tis_send_data.

Cc: stable@vger.kernel.org
Fixes: 1107d065fd (tpm_tis: Introduce intermediate layer for TPM access)
Signed-off-by: Josh Zimmerman <joshz@google.com>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
2016-11-28 01:31:30 +02:00
Winkler, Tomas
ca6d458022 tpm: place kdoc just above tpm_pcr_extend
Place kdoc just above tpm_pcr_extend so it can be parsed correctly.

Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
2016-11-28 01:31:30 +02:00
Jarkko Sakkinen
84fda15286 tpm: sanitize constant expressions
Use cpu_to_b32 at the time it is needed in enum tpm_capabilities and
enum tpm_sub_capabilities in order to be consistent with the other
enums in drivats/char/tpm/tpm.h.

Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
2016-11-28 01:31:30 +02:00
Ed Swierk
aaa6f7f6c8 tpm: Clean up reading of timeout and duration capabilities
Call tpm_getcap() from tpm_get_timeouts() to eliminate redundant
code. Return all errors to the caller rather than swallowing them
(e.g. when tpm_transmit_cmd() returns nonzero).

Signed-off-by: Ed Swierk <eswierk@skyportsystems.com>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Tested-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
2016-11-28 01:31:30 +02:00
Peter Huewe
2c97f6f20c char/tpm: Check return code of wait_for_tpm_stat
In some weird cases it might be possible that the TPM does not set
STS.VALID within the given timeout time (or ever) but sets STS.EXPECT
(STS=0x0C) In this case the driver gets stuck in the while loop of
tpm_tis_send_data and loops endlessly.

Checking the return value of wait_for_tpm_stat fixes this and the driver
bails out correctly.  While at it fixing all other users since if the
TPM does not manage to set STS.VALID within the reasonable timeframe
something is definitely wrong and the driver should react correctly.

Signed-off-by: Peter Huewe <peterhuewe@gmx.de>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Tested-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
2016-11-28 01:31:30 +02:00
Winkler, Tomas
e74f2f76c1 tmp/tpm_crb: implement runtime pm for tpm_crb
Utilize runtime_pm for driving tpm crb idle states.
The framework calls cmd_ready from the pm_runtime_resume handler
and go idle from the pm_runtime_suspend handler.
The TPM framework should wake the device before transmit and receive.
In case the runtime_pm framework is not compiled in or enabled, the device
will be in the permanent ready state.

Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Tested-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
2016-11-28 01:31:30 +02:00
Winkler, Tomas
c58bd34cec tpm/tpm_crb: open code the crb_init into acpi_add
This is preparation step for implementing tpm crb
runtime pm. We need to have tpm chip allocated
and populated before we access the runtime handlers.

Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Tested-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
2016-11-28 01:31:30 +02:00
Winkler, Tomas
bc33c5df71 tmp/tpm_crb: fix Intel PTT hw bug during idle state
There is a HW bug in Skylake, and Broxton PCH Intel PTT device, where
most of the registers in the control area except START, REQUEST, CANCEL,
and LOC_CTRL lost retention when the device is in the idle state. Hence
we need to bring the device to ready state before accessing the other
registers. The fix brings device to ready state before trying to read
command and response buffer addresses in order to remap the for access.

Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Tested-by: Jarkko Sakkinen <jarkko.sakkinn@linux.intel.com>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinn@linux.intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
2016-11-28 01:31:29 +02:00
Winkler, Tomas
ba5287b6ef tpm/tpm_crb: implement tpm crb idle state
The register TPM_CRB_CTRL_REQ_x contains bits goIdle and cmdReady for
SW to indicate that the device can enter or should exit the idle state.

The legacy ACPI-start (SMI + DMA) based devices do not support these
bits and the idle state management is not exposed to the host SW.
Thus, this functionality only is enabled only for a CRB start (MMIO)
based devices.

Based on Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
original patch:
'tpm_crb: implement power tpm crb power management'

To keep the implementation local to the hw we don't use wait_for_tpm_stat
for polling the TPM_CRB_CTRL_REQ.

[jarkko.sakkinen@linux.intel.com: removed cmdReady debug trace on a
 success case due the heavy amount of log traffic it causes.]

Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Tested-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
2016-11-28 01:31:29 +02:00
Linus Torvalds
e5517c2a5a Linux 4.9-rc7 v4.9-rc7 2016-11-27 13:08:04 -08:00
Michael S. Tsirkin
5a717f4f8f netdevice: fix sparse warning for HARD_TX_LOCK
sparse warns about context imbalance in any code
that uses HARD_TX_LOCK/UNLOCK - this is because it's
unable to determine that flags don't change so
lock and unlock are paired.

Seems easy enough to fix by adding __acquire/__release
calls.

With this patch af_packet.c is now sparse-clean,

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-27 15:28:35 -05:00
Ulrik De Bie
428951161b ptp: gianfar: Use high resolution frequency method.
This patch depends on commit d8d2635419 ("ptp: Introduce a high
resolution frequency adjustment method.")

The gianfar devices offer a frequency resolution of about 0.46 ppb
(depends on actual value of tmr_add, for the calculation assumed
0x80000000). This patch lets users of the device benefit from the increased
frequency resolution when tuning the clock. Thanks to the rounding the
maximum error between the requested frequency and the applied frequency
will then be about 0.23 ppb.

Tested on a v3.3.8 kernel on a real gianfar device. Verified compilation
on net-next (currently at v4.9-rc5).

Signed-off-by: Ulrik De Bie <ulrik.debie-os@e2big.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-27 15:26:15 -05:00
Eric Dumazet
b9972d2205 mlx4: do not use priv->stats_lock in mlx4_en_auto_moderation()
Per RX ring packets/bytes counters are not protected by global
priv->stats_lock.

Better not confuse the reader, and use READ_ONCE() to show we read
these counters without surrounding synchronization.

Interrupt moderation is best effort, and we do not really care of
ultra precise counters.

Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-27 15:26:15 -05:00
Rob Clark
c83ea57601 drm/msm: set dma_mask properly
Previous value really only made sense on armv7 without LPAE.  Everything
that supports more than 4g of memory also has iommu's that can map
anything.

Signed-off-by: Rob Clark <robdclark@gmail.com>
2016-11-27 11:35:07 -05:00
Archit Taneja
d8dd80526c drm/msm: Remove bad calls to of_node_put()
In add_components_mdp, we parse the endpoints in MDP output ports
using the helper for_each_endpoint_of_node(). Our function calls
of_node_put() on the endpoint node before we iterate over the
next one. This is already done by the helper, and results in
trying to decrement the refcount twice.

Remove the extra of_node_put calls. This fixes warnings seen when
we try to insert the driver as a module on IFC6410.

Reported-by: Ilia Mirkin <imirkin@alum.mit.edu>
Signed-off-by: Archit Taneja <architt@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
2016-11-27 11:35:07 -05:00
Rob Clark
9708ebbe17 drm/msm/mdp5: move LM bounds check into plane->atomic_check()
The mode_config->max_{width,height} is for the maximum size of a fb, not
the max scanout limits (of the layer-mixer).  It is legal, and in fact
common, to create a larger fb, only only scan-out a smaller part of it.
For example multi-monitor configurations for x11, or android wallpaper
layer (which is created larger than the screen resolution for fast
scrolling by just changing the src x/y coordinates).

Signed-off-by: Rob Clark <robdclark@gmail.com>
2016-11-27 11:32:35 -05:00
Rob Clark
e8406b6132 drm/msm/mdp5: dump smp state on errors too
If the dumpstate modparam is enabled, for debugging error irq's, also
dump SMP state.

Signed-off-by: Rob Clark <robdclark@gmail.com>
2016-11-27 11:32:35 -05:00
Rob Clark
bc5289eed4 drm/msm/mdp5: add debugfs to show smp block status
Signed-off-by: Rob Clark <robdclark@gmail.com>
2016-11-27 11:32:34 -05:00
Rob Clark
49ec5b2e5a drm/msm/mdp5: handle SMP block allocations "atomically"
Previously, SMP block allocation was not checked in the plane's
atomic_check() fxn, so we could fail allocation SMP block allocation at
atomic_update() time.  Re-work the block allocation to request blocks
during atomic_check(), but not update the hw until committing the atomic
update.

Since SMP blocks allocated at atomic_check() time, we need to manage the
SMP state as part of mdp5_state (global atomic state).  This actually
ends up significantly simplifying the SMP management, as the SMP module
does not need to manage the intermediate state between assigning new
blocks before setting flush bits and releasing old blocks after vblank.
(The SMP registers and SMP allocation is not double-buffered, so newly
allocated blocks need to be updated in kms->prepare_commit() released
blocks in kms->complete_commit().)

Signed-off-by: Rob Clark <robdclark@gmail.com>
2016-11-27 11:32:34 -05:00
Rob Clark
4a0f012da3 drm/msm/mdp5: dynamically assign hw pipes to planes
(re)assign the hw pipes to planes based on required caps, and to handle
situations where we could not modify an in-use plane (ie. SMP block
reallocation).

This means all planes advertise the superset of formats and properties.
Userspace must (as always) use atomic TEST_ONLY step for atomic updates,
as not all planes may be available for use on every frame.

The mapping of hwpipe to plane is stored in mdp5_state, so that state
updates are atomically committed in the same way that plane/etc state
updates are managed.  This is needed because the mdp5_plane_state keeps
a pointer to the hwpipe, and we don't want global state to become out
of sync with the plane state if an atomic update fails, we hit deadlock/
backoff scenario, etc.  The use of state_lock keeps multiple parallel
updates which both re-assign hwpipes properly serialized.

Signed-off-by: Rob Clark <robdclark@gmail.com>
2016-11-27 11:32:33 -05:00
Rob Clark
ac2a3fd35b drm/msm/mdp5: add skeletal mdp5_state
Add basic state duplication/apply mechanism.  Following commits will
move actual global hw state into this.

The state_lock allows multiple concurrent updates to proceed as long as
they don't both try to alter global state.  The ww_mutex mechanism will
trigger backoff in case of deadlock between multiple threads trying to
update state.

Signed-off-by: Rob Clark <robdclark@gmail.com>
Reviewed-by: Archit Taneja <architt@codeaurora.org>
2016-11-27 11:32:28 -05:00
Rob Clark
870d738acb drm/msm: subclass drm_atomic_state
This will give the kms backends a slot to stash their own hw specific
global state.

Signed-off-by: Rob Clark <robdclark@gmail.com>
2016-11-27 11:32:27 -05:00
Rob Clark
c056b55dc6 drm/msm/mdp5: introduce mdp5_hw_pipe
Split out the hardware pipe specifics from mdp5_plane.  To start, the hw
pipes are statically assigned to planes, but next step is to assign the
hw pipes during plane->atomic_check() based on requested caps (scaling,
YUV, etc).  And then hw pipe re-assignment if required if required SMP
blocks changes.

Signed-off-by: Rob Clark <robdclark@gmail.com>
Reviewed-by: Archit Taneja <architt@codeaurora.org>
2016-11-27 11:32:20 -05:00
Linus Torvalds
105ecadc6d Merge git://git.infradead.org/intel-iommu
Pull IOMMU fixes from David Woodhouse:
 "Two minor fixes.

  The first fixes the assignment of SR-IOV virtual functions to the
  correct IOMMU unit, and the second fixes the excessively large (and
  physically contiguous) PASID tables used with SVM"

* git://git.infradead.org/intel-iommu:
  iommu/vt-d: Fix PASID table allocation
  iommu/vt-d: Fix IOMMU lookup for SR-IOV Virtual Functions
2016-11-27 08:24:46 -08:00
Rob Clark
f5903bad80 drm/msm/mdp5: rip out mode_changed
It wasn't really doing the right thing if, for example, position or
height changed.

Signed-off-by: Rob Clark <robdclark@gmail.com>
2016-11-27 11:23:13 -05:00
Rob Clark
6ff3ddca2a drm/msm/mdp5: don't be so casty
Signed-off-by: Rob Clark <robdclark@gmail.com>
2016-11-27 11:23:13 -05:00
Rob Clark
0002d30f3f drm/msm/mdp5: drop mdp5_plane::name
Just use plane->name now that it is a thing.  In a following patch, once
we dynamically assign hw pipes to planes, it won't make sense to name
planes the way we do, so this also partly reduces churn in following
patch.

Signed-off-by: Rob Clark <robdclark@gmail.com>
2016-11-27 11:23:12 -05:00
Rob Clark
a210069557 drm/msm/mdp5: nuke mdp5_plane_complete_flip()
We can do this all from mdp5_plane_complete_commit(), so simplify things
a bit and drop mdp5_plane_complete_flip().

Signed-off-by: Rob Clark <robdclark@gmail.com>
2016-11-27 11:23:12 -05:00
Rob Clark
cee265886d drm/msm/mdp5: drop mdp5_crtc::name
Plane's (pipes) can be assigned dynamically with atomic, so it doesn't
make much sense to name the pipe after it's primary plane.

Signed-off-by: Rob Clark <robdclark@gmail.com>
2016-11-27 11:23:10 -05:00
Rob Clark
d3937111cd drm/msm/mdp5: small rename
These are really plane-id's, not crtc-id's.  Only connection to CRTCs is
that they are used as primary-planes.

Current name is just legacy from when we only supported RGB/primary
planes.  Lets pick a better name now.

Signed-off-by: Rob Clark <robdclark@gmail.com>
2016-11-27 11:23:10 -05:00
Rob Clark
667ce33e57 drm/msm: support multiple address spaces
We can have various combinations of 64b and 32b address space, ie. 64b
CPU but 32b display and gpu, or 64b CPU and GPU but 32b display.  So
best to decouple the device iova's from mmap offset.

Signed-off-by: Rob Clark <robdclark@gmail.com>
2016-11-27 11:23:09 -05:00
Linus Torvalds
ff17bf8a0d Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus
Pull MIPS fixes from Ralf Baechle:
 "Another round of MIPS fixes for 4.9:

   - Fix unreadable output in __do_page_fault due to the KERN_CONT
     patchset

   - Correctly handle MIPS R6 fixes to the c0_wired register"

* 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus:
  MIPS: mm: Fix output of __do_page_fault
  MIPS: Mask out limit field when calculating wired entry count
2016-11-27 08:22:59 -08:00
Prasanna Karthik
1ae6d00ad0 Bluetooth: hci_qca: Use setup_timer Kernel API instead of init_timer
Replace init_timer function with setup_timer reported by coccinelle

Signed-off-by: Prasanna Karthik <pkarthik@intrinsyc.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2016-11-27 07:41:05 +01:00
Prasanna Karthik
a1e0d04396 Bluetooth: hci_h5: Use setup_timer Kernel API instead of init_timer
Replace init_timer function with setup_timer reported by coccinelle

Signed-off-by: Prasanna Karthik <pkarthik@intrinsyc.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2016-11-27 07:41:05 +01:00
Prasanna Karthik
6e5ffd0f45 Bluetooth: hci_bcsp: Use setup_timer Kernel API instead of init_timer
Replace init_timer function with setup_timer reported by coccinelle

Signed-off-by: Prasanna Karthik <pkarthik@intrinsyc.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2016-11-27 07:41:05 +01:00
Pavel Machek
21fcf57271 Bluetooth: __ variants of u8 and friends are not neccessary inside kernel
bluetooth.h is not part of user API, so __ variants are not neccessary
here.

Signed-off-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2016-11-27 07:41:05 +01:00
David S. Miller
0b42f25d2f Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
udplite conflict is resolved by taking what 'net-next' did
which removed the backlog receive method assignment, since
it is no longer necessary.

Two entries were added to the non-priv ethtool operations
switch statement, one in 'net' and one in 'net-next, so
simple overlapping changes.

Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-26 23:42:21 -05:00
Linus Torvalds
d8e435f3ab Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull vfs splice fix from Al Viro.

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  fix default_file_splice_read()
2016-11-26 17:21:13 -08:00
Al Viro
8e54cadab4 fix default_file_splice_read()
Botched calculation of number of pages.  As the result,
we were dropping pieces when doing splice to pipe from
e.g. 9p.

Reported-by: Alexei Starovoitov <ast@kernel.org>
Tested-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2016-11-26 20:05:42 -05:00
Linus Torvalds
e348031214 Merge branch 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c fixes from Wolfram Sang:
 "Here is a revert and two bugfixes for the I2C designware driver.

  Please note that we are still hunting down a regression for the
  i2c-octeon driver. While there is a fix pending, we have unclear
  feedback from the testers currently. An rc8 would be quite helpful
  for this case"

* 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
  Revert "i2c: designware: do not disable adapter after transfer"
  i2c: designware: fix rx fifo depth tracking
  i2c: designware: report short transfers
2016-11-26 15:28:34 -08:00
Linus Torvalds
a56f3eb2cd Merge branch 'fixes' of git://git.armlinux.org.uk/~rmk/linux-arm
Pull ARM fix from Russell King:
 "This resolves the ksyms issues by reverting the commit which
  introduced the breakage"

There was what I consider to be a better fix, but it's late in the rc
game, so I'll take the revert.

* 'fixes' of git://git.armlinux.org.uk/~rmk/linux-arm:
  Revert "arm: move exports to definitions"
2016-11-26 15:26:20 -08:00
Linus Torvalds
a0d60e62ea Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
Pull networking fixes from David Miller:

 1) Fix leak in fsl/fman driver, from Dan Carpenter.

 2) Call flow dissector initcall earlier than any networking driver can
    register and start to use it, from Eric Dumazet.

 3) Some dup header fixes from Geliang Tang.

 4) TIPC link monitoring compat fix from Jon Paul Maloy.

 5) Link changes require EEE re-negotiation in bcm_sf2 driver, from
    Florian Fainelli.

 6) Fix bogus handle ID passed into tfilter_notify_chain(), from Roman
    Mashak.

 7) Fix dump size calculation in rtnl_calcit(), from Zhang Shengju.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (26 commits)
  tipc: resolve connection flow control compatibility problem
  mvpp2: use correct size for memset
  net/mlx5: drop duplicate header delay.h
  net: ieee802154: drop duplicate header delay.h
  ibmvnic: drop duplicate header seq_file.h
  fsl/fman: fix a leak in tgec_free()
  net: ethtool: don't require CAP_NET_ADMIN for ETHTOOL_GLINKSETTINGS
  tipc: improve sanity check for received domain records
  tipc: fix compatibility bug in link monitoring
  net: ethernet: mvneta: Remove IFF_UNICAST_FLT which is not implemented
  dwc_eth_qos: drop duplicate headers
  net sched filters: fix filter handle ID in tfilter_notify_chain()
  net: dsa: bcm_sf2: Ensure we re-negotiate EEE during after link change
  bnxt: do not busy-poll when link is down
  udplite: call proper backlog handlers
  ipv6: bump genid when the IFA_F_TENTATIVE flag is clear
  net/mlx4_en: Free netdev resources under state lock
  net: revert "net: l2tp: Treat NET_XMIT_CN as success in l2tp_eth_dev_xmit"
  rtnetlink: fix the wrong minimal dump size getting from rtnl_calcit()
  bnxt_en: Fix a VXLAN vs GENEVE issue
  ...
2016-11-26 13:05:05 -08:00
Rob Clark
394da4b8f3 drm/msm/mdp5: clip img size to src size
If fb dimensions are larger than what can be scanned out, but the src
dimensions are not, the hw can still handle this.  So clip.

Signed-off-by: Rob Clark <robdclark@gmail.com>
2016-11-26 15:45:17 -05:00
Rob Clark
7ed216e53c drm/msm: use DRM_DEBUG_DRIVER()
Signed-off-by: Rob Clark <robdclark@gmail.com>
2016-11-26 15:45:05 -05:00
Rob Clark
702673f628 drm/msm/mdp5: 8x16 actually has 8 mixer stages
Signed-off-by: Rob Clark <robdclark@gmail.com>
2016-11-26 15:44:16 -05:00
Rob Clark
7f6337ffb8 drm/msm: update uapi header license
The same file in libdrm is, as is the tradition with the rest of libdrm,
etc, using an MIT license.  To avoid complications in the future with
sync'ing the uapi header to libdrm, lets fix the license mismatch now
before there are any non-trivial commits from someone other than myself.

Cc: Emil Velikov <emil.l.velikov@gmail.com>
Cc: Gabriel Laskar <gabriel@lse.epita.fr>
Cc: Mikko Rapeli <mikko.rapeli@iki.fi>
Signed-off-by: Rob Clark <robdclark@gmail.com>
Acked-by: Emil Velikov <emil.l.velikov@gmail.com>
2016-11-26 15:44:16 -05:00
Rob Clark
2c38184883 drm/msm/mdp5: no scaling support on RGBn pipes for 8x16
Looks like cut/paste error from the other device cfgs (which do support
scaling on RGBn pipes).

Signed-off-by: Rob Clark <robdclark@gmail.com>
2016-11-26 15:44:16 -05:00
Rob Clark
1455adbd45 drm/msm/mdp5: handle non-fullscreen base plane case
If the bottom-most layer is not fullscreen, we need to use the BASE
mixer stage for solid fill (ie. MDP5_CTL_BLEND_OP_FLAG_BORDER_OUT).  The
blend_setup() code pretty much handled this already, we just had to
figure this out in _atomic_check() and assign the stages appropriately.

Also fix the case where there are zero enabled planes, where we also
need to enable BORDER_OUT.

Signed-off-by: Rob Clark <robdclark@gmail.com>
2016-11-26 15:37:53 -05:00
Linus Torvalds
30e2b7cfc5 Merge branch 'libnvdimm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm
Pull libnvdimm fixes from Dan Williams:

 - Fix a crash that occurs at driver initialization if the memory region
   is already busy (request_mem_region() fails).

 - Fix a vma validation check that mistakenly allows a private device-
   dax mapping to be established. Device-dax explicitly forbids private
   mappings so it can guarantee a given fault granularity and backing
   memory type.

 Both of these fixes have soaked in -next and are tagged for -stable.

* 'libnvdimm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm:
  device-dax: fail all private mapping attempts
  device-dax: check devm_nsio_enable() return value
2016-11-26 12:24:47 -08:00
Linus Torvalds
fc13ca191e KVM fixes for v4.9-rc7
Four fixes for bugs found by syzkaller on x86, all for stable.
 -----BEGIN PGP SIGNATURE-----
 
 iQEcBAABCAAGBQJYObr8AAoJEED/6hsPKofocbIH/j3p7QB73rDM2OCBhzTgGoOb
 hcMLXnYEBD5C48ym2QW+wTEWJNNBikKOknYDX8wD1fIsaf8QoMqjEOSyxLPlexWI
 mfTZnRAqSqYY9sPdlexpGAQV1uusCoIf2q9A+kW9Yy5q9ngzimiimRtFXgb/u6o5
 mXZc7WcM8ZYSYdS+0Bz1lL6k1MGt1Yn207tQ3QNdWi4Pn6aWZp3+8C7rLjWu5zq8
 LkMRsgedyxjULnyXedF+/IaXlC7qVO2LVwdxuHWsmeAPp/GmrNbAD+/4JKNk/Sgz
 DPcPOWB/cCcCbWVY/8k+gRm0mnknX4bqYnwHwju++gwiUmJXIg3vWKfCDUw2SN0=
 =MnV8
 -----END PGP SIGNATURE-----

Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm

Pull KVM fixes from Radim Krčmář:
 "Four fixes for bugs found by syzkaller on x86, all for stable"

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
  KVM: x86: check for pic and ioapic presence before use
  KVM: x86: fix out-of-bounds accesses of rtc_eoi map
  KVM: x86: drop error recovery in em_jmp_far and em_ret_far
  KVM: x86: fix out-of-bounds access in lapic
2016-11-26 12:18:59 -08:00