Commit graph

661,541 commits

Author SHA1 Message Date
James Morris
0821e30cd2 Merge branch 'stable-4.10' of git://git.infradead.org/users/pcmoore/selinux into next 2016-11-24 11:21:25 +11:00
Gavin Shan
f40ec3c748 PCI: Do any VF BAR updates before enabling the BARs
Previously we enabled VFs and enable their memory space before calling
pcibios_sriov_enable().  But pcibios_sriov_enable() may update the VF BARs:
for example, on PPC PowerNV we may change them to manage the association of
VFs to PEs.

Because 64-bit BARs cannot be updated atomically, it's unsafe to update
them while they're enabled.  The half-updated state may conflict with other
devices in the system.

Call pcibios_sriov_enable() before enabling the VFs so any BAR updates
happen while the VF BARs are disabled.

[bhelgaas: changelog]
Tested-by: Carol Soto <clsoto@us.ibm.com>
Signed-off-by: Gavin Shan <gwshan@linux.vnet.ibm.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2016-11-23 17:21:42 -06:00
Ray Jui
feacdb4a35 PCI: iproc: Fix incorrect MSI address alignment
In the code to handle PAXB v2 based MSI steering, the logic aligns the MSI
register address to the size of supported inbound mapping range.  This is
incorrect since it rounds "up" the starting address to the next aligned
address, but what we want is the starting address to be rounded "down" to
the aligned address.

This patch fixes the issue and allows MSI writes to be properly steered to
the GIC.

Fixes: 4b073155fbd3 ("PCI: iproc: Add support for the next-gen PAXB controller")
Signed-off-by: Ray Jui <ray.jui@broadcom.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2016-11-23 17:15:31 -06:00
Takashi Iwai
22a1e7783e xc2028: Fix use-after-free bug properly
The commit 8dfbcc4351 ("[media] xc2028: avoid use after free") tried
to address the reported use-after-free by clearing the reference.

However, it's clearing the wrong pointer; it sets NULL to
priv->ctrl.fname, but it's anyway overwritten by the next line
memcpy(&priv->ctrl, p, sizeof(priv->ctrl)).

OTOH, the actual code accessing the freed string is the strcmp() call
with priv->fname:
	if (!firmware_name[0] && p->fname &&
	    priv->fname && strcmp(p->fname, priv->fname))
		free_firmware(priv);

where priv->fname points to the previous file name, and this was
already freed by kfree().

For fixing the bug properly, this patch does the following:

- Keep the copy of firmware file name in only priv->fname,
  priv->ctrl.fname isn't changed;
- The allocation is done only when the firmware gets loaded;
- The kfree() is called in free_firmware() commonly

Fixes: commit 8dfbcc4351 ('[media] xc2028: avoid use after free')
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2016-11-23 21:04:26 -02:00
Srinivas Kandagatla
d0491fc39b PCI: qcom: Add support for MSM8996 PCIe controller
Add support for the MSM8996/APQ8096 PCIe controller.  MSM8996 supports Gen
1/2, one lane, 3 PCIe root complexes with support for MSI and legacy
interrupts, and it conforms to PCI Express Base 2.1 specification.

Add a post_init callback to qcom_pcie_ops, as the PCIe pipe clocks are only
setup after the phy is powered on.  It also adds an ltssm_enable callback
as it is very much different from other supported SoCs in the driver.

Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Stanimir Varbanov <svarbanov@mm-sol.com>
2016-11-23 17:01:06 -06:00
Maarten Lankhorst
ac2402882f drm/i915: Remove all ->config dereferences from intel_hdmi, v2.
In all cases we can now obtain the relevant crtc_state/conn_state
from the relevant callbacks, which means all the ->config accesses
can be removed and the code cleaned up.

Changes since v1:
- cstate -> crtc_state

Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/8b02a6b4-606a-e43a-b357-ad17f491525b@linux.intel.com
[mlankhorst: Reinstate missing comment]
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
2016-11-23 23:57:41 +01:00
Quentin Lambert
b11d207fb2 PCI: cpqphp: Add missing call to pci_disable_device()
Most error branches following the call to pci_enable_device() contain a
call to pci_disable_device().  Add these calls where they are missing.

This issue was found with Hector.

Signed-off-by: Quentin Lambert <lambert.quentin@gmail.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2016-11-23 16:54:32 -06:00
Ray Jui
c7c44527b3 PCI: iproc: Add support for the next-gen PAXB controller
Add support for the next generation of the iProc PAXB host controller, used
in Stingray.

Signed-off-by: Oza Oza <oza.oza@broadcom.com>
Signed-off-by: Ray Jui <ray.jui@broadcom.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Scott Branden <scott.branden@broadcom.com>
2016-11-23 16:51:14 -06:00
Ray Jui
f7acf811a0 PCI: iproc: Add PAXBv2 binding info
Add new compatible string 'brcm,iproc-pcie-paxb-v2', for the next
generation of the iProc PAXB PCIe host controller.

Signed-off-by: Oza Oza <oza.oza@broadcom.com>
Signed-off-by: Ray Jui <ray.jui@broadcom.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Scott Branden <scott.branden@broadcom.com>
2016-11-23 16:51:14 -06:00
Robert Jarzmik
6480af4915 power_supply: wm97xx_battery: use power_supply_get_drvdata
As the power supply framework provides a way to store and retrieve
private supply data, use it.

In the process, change the platform data for wm97xx_battery from a
container of a single struct wm97xx_batt_pdata to the direct point to wm97xx_batt_pdata.

Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Signed-off-by: Sebastian Reichel <sre@kernel.org>
2016-11-23 23:48:12 +01:00
Julia Lawall
8d4124cb94 wm8350_power: use permission-specific DEVICE_ATTR variants
Use DEVICE_ATTR_RO for read only attributes.  This simplifies the source
code, improves readbility, and reduces the chance of inconsistencies.

The semantic patch that makes this change is as follows:
(http://coccinelle.lip6.fr/)

// <smpl>
@ro@
declarer name DEVICE_ATTR;
identifier x,x_show;
@@

DEVICE_ATTR(x, \(0444\|S_IRUGO\), x_show, NULL);

@script:ocaml@
x << ro.x;
x_show << ro.x_show;
@@

if not (x^"_show" = x_show) then Coccilib.include_match false

@@
declarer name DEVICE_ATTR_RO;
identifier ro.x,ro.x_show;
@@

- DEVICE_ATTR(x, \(0444\|S_IRUGO\), x_show, NULL);
+ DEVICE_ATTR_RO(x);
// </smpl>

Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Signed-off-by: Sebastian Reichel <sre@kernel.org>
2016-11-23 23:46:20 +01:00
Russell King
5ee1d39e1c power: ipaq_micro_battery: fix alias
The alias for the ipaq_micro_battery driver is incorrect, fix it so the
module can be auto-loaded.

Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Sebastian Reichel <sre@kernel.org>
2016-11-23 23:44:40 +01:00
Linus Torvalds
10b9dd5686 NFS client bugfixes for Linux 4.9 part 4
Stable Bugfixes:
 - Hide array-bounds warning
 
 Bugfixes:
 - Keep a reference on lock states while checking
 - Handle NFS4ERR_OLD_STATEID in nfs4_reclaim_open_state
 - Don't call close if the open stateid has already been cleared
 - Fix CLOSE rases with OPEN
 - Fix a regression in DELEGRETURN
 -----BEGIN PGP SIGNATURE-----
 
 iQIcBAABCAAGBQJYNhGKAAoJENfLVL+wpUDrGgEP/0okAGQfb7yHVNYjDpMmVh7u
 6T1Vh+xbIMsGmuLXPOJH3FRFDnPWCrZO77K+l1y5oMl1fW/hA5h07yt0g0wT94+u
 if1wunZ6bak6KFeevo4xphpqXCjLhwpe801SbBcJPY6D6YxMckobHR8NcuzTjFab
 Kc9OAjnpIzS2lJBThaeyavGGnrlhNvH+Le+zEgMv/bSBTiPSymLlpj12a88cuHRF
 hx2vBao3UuR1vaTaZ5Zdp954DtNXNo7Pikye11cvVJVhesNwpZe37SszcRZ1U6P4
 o4LnYf/ImkjDrcRyvFRxc6bu/Q1jLBuAYZjB4oMcx7YQW8rJqcS/UkEpGzOfER3i
 3NQXFqacIAGhULfJxF8W0vPGzKM74koa0HRRI34C10qZAPe06Iy8slkdIjM4t2IX
 ASJI+uyrbIqTQ/x3FObWlqvw4TCOntYFpOsHF6G8M0uj+tX+3iXjpmwDGsJDVyFE
 y+egnnVn9LmGGfg1SBU2VBKL2945e/VAWfHtDGmJYgEwNDiqtutoIMDn+szESX60
 yGLPJdIL3O7pTWmDXdSSpUJZ+wqa90rrU34kGmk3njydaNHeA1SEhcNTi2Ha5ALb
 NcVD0omnhrZUFE5MRY0OtmHRwhsaa9CYlMyqzb5SEeb46Z3KUm1KX9qEy4I4rZHG
 C4MlTY5AScHqqNXmT8Pu
 =YhQv
 -----END PGP SIGNATURE-----

Merge tag 'nfs-for-4.9-4' of git://git.linux-nfs.org/projects/anna/linux-nfs

Pull NFS client bugfixes from Anna Schumaker:
 "Most of these fix regressions or races, but there is one patch for
  stable that Arnd sent me

  Stable bugfix:
   - Hide array-bounds warning

  Bugfixes:
   - Keep a reference on lock states while checking
   - Handle NFS4ERR_OLD_STATEID in nfs4_reclaim_open_state
   - Don't call close if the open stateid has already been cleared
   - Fix CLOSE rases with OPEN
   - Fix a regression in DELEGRETURN"

* tag 'nfs-for-4.9-4' of git://git.linux-nfs.org/projects/anna/linux-nfs:
  NFSv4.x: hide array-bounds warning
  NFSv4.1: Keep a reference on lock states while checking
  NFSv4.1: Handle NFS4ERR_OLD_STATEID in nfs4_reclaim_open_state
  NFSv4: Don't call close if the open stateid has already been cleared
  NFSv4: Fix CLOSE races with OPEN
  NFSv4.1: Fix a regression in DELEGRETURN
2016-11-23 14:43:40 -08:00
Andrew F. Davis
3bee9ea1de power: supply: bq27xxx_battery: Fix register map for BQ27510 and BQ27520
The BQ27510 and BQ27520 use a slightly different register map than the
BQ27500, add a new type enum and add these gauges to it.

Fixes: d74534c277 ("power: bq27xxx_battery: Add support for additional bq27xxx family devices")
Based-on-patch-by: Kenneth R. Crudup <kenny@panix.com>
Signed-off-by: Andrew F. Davis <afd@ti.com>
Signed-off-by: Sebastian Reichel <sre@kernel.org>
2016-11-23 23:37:27 +01:00
Stephen Boyd
5e2035b90e Two small fixes for MIPI PLLs on sunxi devices and a build fix
for a Broadcom clk driver having unmet dependencies.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.22 (GNU/Linux)
 
 iQIcBAABCAAGBQJYNhi4AAoJEK0CiJfG5JUlRc8P+wYZRyhm/rCVpMnqCk/2ZaZU
 Oe9hJQe6x85LEeh3+Q/IdgxGYQ3nDklNRtmFQJ62wkCv7WrrIXO7zLvaTJ2JjsGd
 RU8tZTc9v1IsBhZhKlqv8fx3lvTCGf8aCeHg/vGczDfbkwHEwdsgFjwD9115WTdR
 6UenybklZmU+p9k0Th/DrqYN4xVIlbr+So9dy+KbaRdM9ZUvg3pTb2wX3KH7V0qG
 Wytz90FQ9WZChjxR8kQRLyBsJXtgNGgLDe7KTraYUizSE0Do/oVGM/FhQWEWnmJ4
 i1WgkS5Bve9AoOdWWkLPlSz295OwAbW2uQ+U8KYEYsalT2eSM/ppTnX0Mo5CopKh
 vwSjNL/kWTAtwc5majTf8fuDworX6QhCHo9FseF38D/xDYPSiXZsaCYCENY7Hjpt
 ggiFe6KkdSWgMPcns+vvgRRVcNQT+I2kKPUGN2IDfu5r/brHWJvbstnqsmHq75gB
 qlNIVcq5o69B4jr6Qumh/unI9JMER/zo7m9PLVG6LVGU0SqumzAU3XDN4Ifk5dea
 /xsQF1H6M9d5vulEAqToxG5dl3dmIXndLnAYuHHQoUzVsFSxfLfTKxlksZsOgyza
 xdbpzQ3NNZAvfTTxjpsNKDlcrik4Je9bbsXypsvt3QvpLGAz18yirxAr00pmvdbV
 R6RO12nye3q94+8u4uPt
 =a/l6
 -----END PGP SIGNATURE-----

Merge branch 'clk-fixes' into clk-next

* clk-fixes:
  clk: bcm: Fix unmet Kconfig dependencies for CLK_BCM_63XX
  clk: sunxi-ng: enable so-said LDOs for A33 SoC's pll-mipi clock
  clk: sunxi-ng: sun6i-a31: Enable PLL-MIPI LDOs when ungating it
2016-11-23 14:31:45 -08:00
Florian Fainelli
b7d79eb461 clk: bcm: Fix unmet Kconfig dependencies for CLK_BCM_63XX
With commit f4e8715099 ("clk: iproc: Make clocks visible options"),
COMMON_CLK_IPROC gained a dependency on ARCH_BCM_IPROC, yet CLK_BCM_63XX
also selects that option, this causes the following Kconfig warning:

warning: (CLK_BCM_63XX) selects COMMON_CLK_IPROC which has unmet direct
dependencies ((ARCH_BCM_IPROC || COMPILE_TEST) && COMMON_CLK)

Fix this by adding proper depends for COMMON_CLK_IPROC

Fixes: f4e8715099 ("clk: iproc: Make clocks visible options")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Ray Jui <ray.jui@broadcom.com>
[sboyd@codeaurora.org: Drop default part as it's redundant]
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-11-23 14:31:11 -08:00
Tony Lindgren
075eb5719d bq24190_charger: Fix PM runtime use for bq24190_battery_set_property
There's a typo, it should do pm_runtime_get_sync, not put.

Fixes: d7bf353fd0 ("bq24190_charger: Add support for TI BQ24190 Battery Charger")
Cc: Mark A. Greer <mgreer@animalcreek.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Reviewed-by: Mark Greer <mgreer@animalcreek.com>
Signed-off-by: Sebastian Reichel <sre@kernel.org>
2016-11-23 23:27:41 +01:00
Suraj Jitindar Singh
2ee13be34b KVM: PPC: Book3S HV: Update kvmppc_set_arch_compat() for ISA v3.00
The function kvmppc_set_arch_compat() is used to determine the value of the
processor compatibility register (PCR) for a guest running in a given
compatibility mode. There is currently no support for v3.00 of the ISA.

Add support for v3.00 of the ISA which adds an ISA v2.07 compatilibity mode
to the PCR.

We also add a check to ensure the processor we are running on is capable of
emulating the chosen processor (for example a POWER7 cannot emulate a
POWER8, similarly with a POWER8 and a POWER9).

Based on work by: Paul Mackerras <paulus@ozlabs.org>

[paulus@ozlabs.org - moved dummy PCR_ARCH_300 definition here; set
 guest_pcr_bit when arch_compat == 0, added comment.]

Signed-off-by: Suraj Jitindar Singh <sjitindarsingh@gmail.com>
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
2016-11-24 09:24:23 +11:00
Paul Mackerras
45c940ba49 KVM: PPC: Book3S HV: Treat POWER9 CPU threads as independent subcores
With POWER9, each CPU thread has its own MMU context and can be
in the host or a guest independently of the other threads; there is
still however a restriction that all threads must use the same type
of address translation, either radix tree or hashed page table (HPT).

Since we only support HPT guests on a HPT host at this point, we
can treat the threads as being independent, and avoid all of the
work of coordinating the CPU threads.  To make this simpler, we
introduce a new threads_per_vcore() function that returns 1 on
POWER9 and threads_per_subcore on POWER7/8, and use that instead
of threads_per_subcore or threads_per_core in various places.

This also changes the value of the KVM_CAP_PPC_SMT capability on
POWER9 systems from 4 to 1, so that userspace will not try to
create VMs with multiple vcpus per vcore.  (If userspace did create
a VM that thought it was in an SMT mode, the VM might try to use
the msgsndp instruction, which will not work as expected.  In
future it may be possible to trap and emulate msgsndp in order to
allow VMs to think they are in an SMT mode, if only for the purpose
of allowing migration from POWER8 systems.)

With all this, we can now run guests on POWER9 as long as the host
is running with HPT translation.  Since userspace currently has no
way to request radix tree translation for the guest, the guest has
no choice but to use HPT translation.

Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
2016-11-24 09:24:23 +11:00
Paul Mackerras
84f7139c06 KVM: PPC: Book3S HV: Enable hypervisor virtualization interrupts while in guest
The new XIVE interrupt controller on POWER9 can direct external
interrupts to the hypervisor or the guest.  The interrupts directed to
the hypervisor are controlled by an LPCR bit called LPCR_HVICE, and
come in as a "hypervisor virtualization interrupt".  This sets the
LPCR bit so that hypervisor virtualization interrupts can occur while
we are in the guest.  We then also need to cope with exiting the guest
because of a hypervisor virtualization interrupt.

Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
2016-11-24 09:24:23 +11:00
Paul Mackerras
bf53c88e42 KVM: PPC: Book3S HV: Use stop instruction rather than nap on POWER9
POWER9 replaces the various power-saving mode instructions on POWER8
(doze, nap, sleep and rvwinkle) with a single "stop" instruction, plus
a register, PSSCR, which controls the depth of the power-saving mode.
This replaces the use of the nap instruction when threads are idle
during guest execution with the stop instruction, and adds code to
set PSSCR to a value which will allow an SMT mode switch while the
thread is idle (given that the core as a whole won't be idle in these
cases).

Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
2016-11-24 09:24:23 +11:00
Paul Mackerras
f725758b89 KVM: PPC: Book3S HV: Use OPAL XICS emulation on POWER9
POWER9 includes a new interrupt controller, called XIVE, which is
quite different from the XICS interrupt controller on POWER7 and
POWER8 machines.  KVM-HV accesses the XICS directly in several places
in order to send and clear IPIs and handle interrupts from PCI
devices being passed through to the guest.

In order to make the transition to XIVE easier, OPAL firmware will
include an emulation of XICS on top of XIVE.  Access to the emulated
XICS is via OPAL calls.  The one complication is that the EOI
(end-of-interrupt) function can now return a value indicating that
another interrupt is pending; in this case, the XIVE will not signal
an interrupt in hardware to the CPU, and software is supposed to
acknowledge the new interrupt without waiting for another interrupt
to be delivered in hardware.

This adapts KVM-HV to use the OPAL calls on machines where there is
no XICS hardware.  When there is no XICS, we look for a device-tree
node with "ibm,opal-intc" in its compatible property, which is how
OPAL indicates that it provides XICS emulation.

In order to handle the EOI return value, kvmppc_read_intr() has
become kvmppc_read_one_intr(), with a boolean variable passed by
reference which can be set by the EOI functions to indicate that
another interrupt is pending.  The new kvmppc_read_intr() keeps
calling kvmppc_read_one_intr() until there are no more interrupts
to process.  The return value from kvmppc_read_intr() is the
largest non-zero value of the returns from kvmppc_read_one_intr().

Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
2016-11-24 09:24:23 +11:00
Paul Mackerras
1704a81cce KVM: PPC: Book3S HV: Use msgsnd for IPIs to other cores on POWER9
On POWER9, the msgsnd instruction is able to send interrupts to
other cores, as well as other threads on the local core.  Since
msgsnd is generally simpler and faster than sending an IPI via the
XICS, we use msgsnd for all IPIs sent by KVM on POWER9.

Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
2016-11-24 09:24:23 +11:00
Paul Mackerras
7c5b06cadf KVM: PPC: Book3S HV: Adapt TLB invalidations to work on POWER9
POWER9 adds new capabilities to the tlbie (TLB invalidate entry)
and tlbiel (local tlbie) instructions.  Both instructions get a
set of new parameters (RIC, PRS and R) which appear as bits in the
instruction word.  The tlbiel instruction now has a second register
operand, which contains a PID and/or LPID value if needed, and
should otherwise contain 0.

This adapts KVM-HV's usage of tlbie and tlbiel to work on POWER9
as well as older processors.  Since we only handle HPT guests so
far, we need RIC=0 PRS=0 R=0, which ends up with the same instruction
word as on previous processors, so we don't need to conditionally
execute different instructions depending on the processor.

The local flush on first entry to a guest in book3s_hv_rmhandlers.S
is a loop which depends on the number of TLB sets.  Rather than
using feature sections to set the number of iterations based on
which CPU we're on, we now work out this number at VM creation time
and store it in the kvm_arch struct.  That will make it possible to
get the number from the device tree in future, which will help with
compatibility with future processors.

Since mmu_partition_table_set_entry() does a global flush of the
whole LPID, we don't need to do the TLB flush on first entry to the
guest on each processor.  Therefore we don't set all bits in the
tlb_need_flush bitmap on VM startup on POWER9.

Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
2016-11-24 09:24:23 +11:00
Paul Mackerras
e9cf1e0856 KVM: PPC: Book3S HV: Add new POWER9 guest-accessible SPRs
This adds code to handle two new guest-accessible special-purpose
registers on POWER9: TIDR (thread ID register) and PSSCR (processor
stop status and control register).  They are context-switched
between host and guest, and the guest values can be read and set
via the one_reg interface.

The PSSCR contains some fields which are guest-accessible and some
which are only accessible in hypervisor mode.  We only allow the
guest-accessible fields to be read or set by userspace.

Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
2016-11-24 09:24:23 +11:00
Paul Mackerras
83677f551e KVM: PPC: Book3S HV: Adjust host/guest context switch for POWER9
Some special-purpose registers that were present and accessible
by guests on POWER8 no longer exist on POWER9, so this adds
feature sections to ensure that we don't try to context-switch
them when going into or out of a guest on POWER9.  These are
all relatively obscure, rarely-used registers, but we had to
context-switch them on POWER8 to avoid creating a covert channel.
They are: SPMC1, SPMC2, MMCRS, CSIGR, TACR, TCSCR, and ACOP.

Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
2016-11-24 09:24:23 +11:00
Paul Mackerras
7a84084c60 KVM: PPC: Book3S HV: Set partition table rather than SDR1 on POWER9
On POWER9, the SDR1 register (hashed page table base address) is no
longer used, and instead the hardware reads the HPT base address
and size from the partition table.  The partition table entry also
contains the bits that specify the page size for the VRMA mapping,
which were previously in the LPCR.  The VPM0 bit of the LPCR is
now reserved; the processor now always uses the VRMA (virtual
real-mode area) mechanism for guest real-mode accesses in HPT mode,
and the RMO (real-mode offset) mechanism has been dropped.

When entering or exiting the guest, we now only have to set the
LPIDR (logical partition ID register), not the SDR1 register.
There is also no requirement now to transition via a reserved
LPID value.

Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
2016-11-24 09:24:23 +11:00
Paul Mackerras
abb7c7ddba KVM: PPC: Book3S HV: Adapt to new HPTE format on POWER9
This adapts the KVM-HV hashed page table (HPT) code to read and write
HPT entries in the new format defined in Power ISA v3.00 on POWER9
machines.  The new format moves the B (segment size) field from the
first doubleword to the second, and trims some bits from the AVA
(abbreviated virtual address) and ARPN (abbreviated real page number)
fields.  As far as possible, the conversion is done when reading or
writing the HPT entries, and the rest of the code continues to use
the old format.

Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
2016-11-24 09:24:23 +11:00
Johannes Thumshirn
e42010d820 PCI: Set Read Completion Boundary to 128 iff Root Port supports it (_HPX)
Per PCIe spec r3.0, sec 2.3.1.1, the Read Completion Boundary (RCB)
determines the naturally aligned address boundaries on which a Read Request
may be serviced with multiple Completions:

  - For a Root Complex, RCB is 64 bytes or 128 bytes
    This value is reported in the Link Control Register

    Note: Bridges and Endpoints may implement a corresponding command bit
    which may be set by system software to indicate the RCB value for the
    Root Complex, allowing the Bridge/Endpoint to optimize its behavior
    when the Root Complex’s RCB is 128 bytes.

  - For all other system elements, RCB is 128 bytes

Per sec 7.8.7, if a Root Port only supports a 64-byte RCB, the RCB of all
downstream devices must be clear, indicating an RCB of 64 bytes.  If the
Root Port supports a 128-byte RCB, we may optionally set the RCB of
downstream devices so they know they can generate larger Completions.

Some BIOSes supply an _HPX that tells us to set RCB, even though the Root
Port doesn't have RCB set, which may lead to Malformed TLP errors if the
Endpoint generates completions larger than the Root Port can handle.

The IBM x3850 X6 with BIOS version -[A8E120CUS-1.30]- 08/22/2016 supplies
such an _HPX and a Mellanox MT27500 ConnectX-3 device fails to initialize:

  mlx4_core 0000:41:00.0: command 0xfff timed out (go bit not cleared)
  mlx4_core 0000:41:00.0: device is going to be reset
  mlx4_core 0000:41:00.0: Failed to obtain HW semaphore, aborting
  mlx4_core 0000:41:00.0: Fail to reset HCA
  ------------[ cut here ]------------
  kernel BUG at drivers/net/ethernet/mellanox/mlx4/catas.c:193!

After 6cd33649fa ("PCI: Add pci_configure_device() during enumeration")
and 7a1562d4f2 ("PCI: Apply _HPX Link Control settings to all devices
with a link"), we apply _HPX settings to *all* devices, not just those
hot-added after boot.

Before 7a1562d4f2, we didn't touch the Mellanox RCB, and the device
worked.  After 7a1562d4f2, we set its RCB to 128, and it failed.

Set the RCB to 128 iff the Root Port supports a 128-byte RCB.  Otherwise,
set RCB to 64 bytes.  This effectively ignores what _HPX tells us about
RCB.

Note that this change only affects _HPX handling.  If we have no _HPX, this
does nothing with RCB.

[bhelgaas: changelog, clear RCB if not set for Root Port]
Fixes: 6cd33649fa ("PCI: Add pci_configure_device() during enumeration")
Fixes: 7a1562d4f2 ("PCI: Apply _HPX Link Control settings to all devices with a link")
Link: https://bugzilla.kernel.org/show_bug.cgi?id=187781
Tested-by: Frank Danapfel <fdanapfe@redhat.com>
Signed-off-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Myron Stowe <myron.stowe@redhat.com>
CC: stable@vger.kernel.org	# v3.18+
2016-11-23 16:23:55 -06:00
Johannes Thumshirn
e784930bd6 PCI: Export pcie_find_root_port
Export pcie_find_root_port() so we can use it outside of PCIe-AER error
injection.

Signed-off-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2016-11-23 16:23:23 -06:00
Paul Mackerras
bc33b1fc83 Merge remote-tracking branch 'remotes/powerpc/topic/ppc-kvm' into kvm-ppc-next
This merges in the ppc-kvm topic branch to get changes to
arch/powerpc code that are necessary for adding POWER9 KVM support.

Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
2016-11-24 09:22:28 +11:00
Markus Elfring
4cc5bed1ca [media] uvcvideo: Use memdup_user() rather than duplicating its implementation
Reuse existing functionality from memdup_user() instead of keeping
duplicate source code.

This issue was detected by using the Coccinelle software.

Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2016-11-23 20:06:41 -02:00
Edgar Thier
eb165a20df [media] uvcvideo: Add bayer 16-bit format patterns
Those formats are implemented by The DFK 23UP1300, DFK 23UX249 and
DFK 23UX250 USB 3.0 industrial cameras from The Imaging Source.

Signed-off-by: Edgar Thier <info@edgarthier.net>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2016-11-23 20:06:18 -02:00
Sakari Ailus
5bbced125a [media] doc-rst: Specify raw bayer format variant used in the examples
The documentation simply mentioned that one of the four pixel orders was
used in the example. Now specify the exact pixelformat instead.

Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2016-11-23 20:05:25 -02:00
Laurent Pinchart
5b382290ff [media] v4l: Add description of the Y8I, Y12I and Z16 formats
The formats have been added without a description, fix that.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2016-11-23 20:04:43 -02:00
Sakari Ailus
b9a4b13c77 [media] v4l: Add 16-bit raw bayer pixel formats
The formats added by this patch are:

	V4L2_PIX_FMT_SBGGR16
	V4L2_PIX_FMT_SGBRG16
	V4L2_PIX_FMT_SGRBG16

V4L2_PIX_FMT_SRGGB16 already existed before the patch. Rework the
documentation to match that of the other sample depths.

Also align the description of V4L2_PIX_FMT_SRGGB16 to match with other
similar formats.

Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Acked-by: Lad, Prabhakar <prabhakar.csengg@gmail.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2016-11-23 20:04:22 -02:00
Andrey Utkin
59eba2d1ec [media] saa7146: Fix for while releasing video buffers
Fix this bug:
	"[BUG] process stuck when closing saa7146 [dvb_ttpci]"

Release queued DMA buffers when ending streaming, so that
videobuf_waiton() doesn't block forever.

As reported, this fixes avoids occasional lockup of process reading from
video device, which manifests in such log:

INFO: task ffmpeg:9864 blocked for more than 120 seconds.
      Tainted: P           O    4.6.7 #3
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
ffmpeg          D ffff880177cc7b00     0  9864      1 0x00000000
 ffff880177cc7b00 0000000000000202 0000000000000202 ffffffff8180b4c0
 ffff88019d79e4c0 ffffffff81064050 ffff880177cc7ae0 ffff880177cc8000
 ffff880177cc7b18 ffff8801fd41d648 ffff8802307acca0 ffff8802307acc70
Call Trace:
 [<ffffffff81064050>] ? preempt_count_add+0x89/0xab
 [<ffffffff81477215>] schedule+0x86/0x9e
 [<ffffffff81477215>] ? schedule+0x86/0x9e
 [<ffffffffa0fe1c96>] videobuf_waiton+0x131/0x15e [videobuf_core]
 [<ffffffff8107727b>] ? wait_woken+0x6d/0x6d
 [<ffffffffa1017be9>] saa7146_dma_free+0x39/0x5b [saa7146_vv]
 [<ffffffffa10186c4>] buffer_release+0x2a/0x3e [saa7146_vv]
 [<ffffffffa0fee4a8>] videobuf_vm_close+0xd8/0x103 [videobuf_dma_sg]
 [<ffffffff8112049e>] remove_vma+0x25/0x4d
 [<ffffffff81121a32>] exit_mmap+0xce/0xf7
 [<ffffffff8104381d>] mmput+0x4e/0xe2
 [<ffffffff810491fd>] do_exit+0x372/0x920
 [<ffffffff81049813>] do_group_exit+0x3c/0x98
 [<ffffffff810522ef>] get_signal+0x4e8/0x56e
 [<ffffffff810710a5>] ? task_dead_fair+0xd/0xf
 [<ffffffff81017020>] do_signal+0x23/0x521
 [<ffffffff81479e82>] ? _raw_spin_unlock_irqrestore+0x13/0x25
 [<ffffffff8109710d>] ? hrtimer_try_to_cancel+0xd7/0x104
 [<ffffffff8109b306>] ? ktime_get+0x4c/0xa1
 [<ffffffff81096ea6>] ? update_rmtp+0x46/0x5b
 [<ffffffff81097ce0>] ? hrtimer_nanosleep+0xe4/0x10e
 [<ffffffff81096e3c>] ? hrtimer_init+0xeb/0xeb
 [<ffffffff810014f8>] exit_to_usermode_loop+0x4f/0x93
 [<ffffffff810019fe>] syscall_return_slowpath+0x3b/0x46
 [<ffffffff8147a355>] entry_SYSCALL_64_fastpath+0x8d/0x8f

Reported-by: Philipp Matthias Hahn <pmhahn+video@pmhahn.de>
Tested-by: Philipp Matthias Hahn <pmhahn+video@pmhahn.de>
Signed-off-by: Andrey Utkin <andrey_utkin@fastmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2016-11-23 19:52:12 -02:00
Andrea Gelmini
1a9164a98e [media] extended-controls.rst: fix typo
Fix a typo on a word inside it.

Signed-off-by: Andrea Gelmini <andrea.gelmini@gelma.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2016-11-23 19:38:28 -02:00
Linus Torvalds
4d92c8d036 Merge branch 'stable' of git://git.kernel.org/pub/scm/linux/kernel/git/cmetcalf/linux-tile
Pull arch/tile bugfix from Chris Metcalf:
 "This fixes a bug that causes reboots after 208 days of uptime :-)"

* 'stable' of git://git.kernel.org/pub/scm/linux/kernel/git/cmetcalf/linux-tile:
  tile: avoid using clocksource_cyc2ns with absolute cycle count
2016-11-23 13:15:15 -08:00
Steven Rostedt (Red Hat)
4239174570 tracing: Make tracepoint_printk a static_key
Currently, when tracepoint_printk is set (enabled by the "tp_printk" kernel
command line), it causes trace events to print via printk(). This is a very
dangerous operation, but is useful for debugging.

The issue is, it's seldom used, but it is always checked even if it's not
enabled by the kernel command line. Instead of having this feature called by
a branch against a variable, turn that variable into a static key, and this
will remove the test and jump.

To simplify things, the functions output_printk() and
trace_event_buffer_commit() were moved from trace_events.c to trace.c.

Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2016-11-23 15:52:45 -05:00
Icenowy Zheng
98fb2b95d2 clk: sunxi-ng: enable so-said LDOs for A33 SoC's pll-mipi clock
In the user manual of A33 SoC, the bit 22 and 23 of pll-mipi control
register is called "LDO{1,2}_EN", and according to the BSP source code
from Allwinner [1], the LDOs are enabled during the clock's enabling
process.

The clock failed to generate output if the two LDOs are not enabled.

Add the two bits to the clock's gate bits, so that the LDOs are enabled
when the PLL is enabled.

[1] https://github.com/allwinner-zh/linux-3.4-sunxi/blob/master/drivers/clk/sunxi/clk-sun8iw5.c#L429

Fixes: d05c748bd7 ("clk: sunxi-ng: Add A33 CCU support")
Signed-off-by: Icenowy Zheng <icenowy@aosc.xyz>
Acked-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2016-11-23 12:32:39 -08:00
Chris Metcalf
e658a6f14d tile: avoid using clocksource_cyc2ns with absolute cycle count
For large values of "mult" and long uptimes, the intermediate
result of "cycles * mult" can overflow 64 bits.  For example,
the tile platform calls clocksource_cyc2ns with a 1.2 GHz clock;
we have mult = 853, and after 208.5 days, we overflow 64 bits.

Since clocksource_cyc2ns() is intended to be used for relative
cycle counts, not absolute cycle counts, performance is more
importance than accepting a wider range of cycle values.  So,
just use mult_frac() directly in tile's sched_clock().

Commit 4cecf6d401 ("sched, x86: Avoid unnecessary overflow
in sched_clock") by Salman Qazi results in essentially the same
generated code for x86 as this change does for tile.  In fact,
a follow-on change by Salman introduced mult_frac() and switched
to using it, so the C code was largely identical at that point too.

Peter Zijlstra then added mul_u64_u32_shr() and switched x86
to use it.  This is, in principle, better; by optimizing the
64x64->64 multiplies to be 32x32->64 multiplies we can potentially
save some time.  However, the compiler piplines the 64x64->64
multiplies pretty well, and the conditional branch in the generic
mul_u64_u32_shr() causes some bubbles in execution, with the
result that it's pretty much a wash.  If tilegx provided its own
implementation of mul_u64_u32_shr() without the conditional branch,
we could potentially save 3 cycles, but that seems like small gain
for a fair amount of additional build scaffolding; no other platform
currently provides a mul_u64_u32_shr() override, and tile doesn't
currently have an <asm/div64.h> header to put the override in.

Additionally, gcc currently has an optimization bug that prevents
it from recognizing the opportunity to use a 32x32->64 multiply,
and so the result would be no better than the existing mult_frac()
until such time as the compiler is fixed.

For now, just using mult_frac() seems like the right answer.

Cc: stable@kernel.org [v3.4+]
Signed-off-by: Chris Metcalf <cmetcalf@mellanox.com>
2016-11-23 15:28:54 -05:00
Filipe Manana
f177d73949 Btrfs: fix emptiness check for dirtied extent buffers at check_leaf()
We can not simply use the owner field from an extent buffer's header to
get the id of the respective tree when the extent buffer is from a
relocation tree. When we create the root for a relocation tree we leave
(on purpose) the owner field with the same value as the subvolume's tree
root (we do this at ctree.c:btrfs_copy_root()). So we must ignore extent
buffers from relocation trees, which have the BTRFS_HEADER_FLAG_RELOC
flag set, because otherwise we will always consider the extent buffer
as not being the root of the tree (the root of original subvolume tree
is always different from the root of the respective relocation tree).

This lead to assertion failures when running with the integrity checker
enabled (CONFIG_BTRFS_FS_CHECK_INTEGRITY=y) such as the following:

[  643.393409] BTRFS critical (device sdg): corrupt leaf, non-root leaf's nritems is 0: block=38506496, root=260, slot=0
[  643.397609] BTRFS info (device sdg): leaf 38506496 total ptrs 0 free space 3995
[  643.407075] assertion failed: 0, file: fs/btrfs/disk-io.c, line: 4078
[  643.408425] ------------[ cut here ]------------
[  643.409112] kernel BUG at fs/btrfs/ctree.h:3419!
[  643.409773] invalid opcode: 0000 [#1] PREEMPT SMP
[  643.410447] Modules linked in: dm_flakey dm_mod crc32c_generic btrfs xor raid6_pq ppdev psmouse acpi_cpufreq parport_pc evdev parport tpm_tis tpm_tis_core pcspkr serio_raw i2c_piix4 sg tpm i2c_core button processor loop autofs4 ext4 crc16 jbd2 mbcache sr_mod cdrom sd_mod ata_generic virtio_scsi ata_piix libata virtio_pci virtio_ring scsi_mod virtio e1000 floppy
[  643.414356] CPU: 11 PID: 32726 Comm: btrfs Not tainted 4.8.0-rc8-btrfs-next-35+ #1
[  643.414356] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.9.1-0-gb3ef39f-prebuilt.qemu-project.org 04/01/2014
[  643.414356] task: ffff880145e95b00 task.stack: ffff88014826c000
[  643.414356] RIP: 0010:[<ffffffffa0352759>]  [<ffffffffa0352759>] assfail.constprop.41+0x1c/0x1e [btrfs]
[  643.414356] RSP: 0018:ffff88014826fa28  EFLAGS: 00010292
[  643.414356] RAX: 0000000000000039 RBX: ffff88014e2d7c38 RCX: 0000000000000001
[  643.414356] RDX: ffff88023f4d2f58 RSI: ffffffff81806c63 RDI: 00000000ffffffff
[  643.414356] RBP: ffff88014826fa28 R08: 0000000000000001 R09: 0000000000000000
[  643.414356] R10: ffff88014826f918 R11: ffffffff82f3c5ed R12: ffff880172910000
[  643.414356] R13: ffff880233992230 R14: ffff8801a68a3310 R15: fffffffffffffff8
[  643.414356] FS:  00007f9ca305e8c0(0000) GS:ffff88023f4c0000(0000) knlGS:0000000000000000
[  643.414356] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[  643.414356] CR2: 00007f9ca3071000 CR3: 000000015d01b000 CR4: 00000000000006e0
[  643.414356] Stack:
[  643.414356]  ffff88014826fa50 ffffffffa02d655a 000000000000000a ffff88014e2d7c38
[  643.414356]  0000000000000000 ffff88014826faa8 ffffffffa02b72f3 ffff88014826fab8
[  643.414356]  00ffffffa03228e4 0000000000000000 0000000000000000 ffff8801bbd4e000
[  643.414356] Call Trace:
[  643.414356]  [<ffffffffa02d655a>] btrfs_mark_buffer_dirty+0xdf/0xe5 [btrfs]
[  643.414356]  [<ffffffffa02b72f3>] btrfs_copy_root+0x18a/0x1d1 [btrfs]
[  643.414356]  [<ffffffffa0322921>] create_reloc_root+0x72/0x1ba [btrfs]
[  643.414356]  [<ffffffffa03267c2>] btrfs_init_reloc_root+0x7b/0xa7 [btrfs]
[  643.414356]  [<ffffffffa02d9e44>] record_root_in_trans+0xdf/0xed [btrfs]
[  643.414356]  [<ffffffffa02db04e>] btrfs_record_root_in_trans+0x50/0x6a [btrfs]
[  643.414356]  [<ffffffffa030ad2b>] create_subvol+0x472/0x773 [btrfs]
[  643.414356]  [<ffffffffa030b406>] btrfs_mksubvol+0x3da/0x463 [btrfs]
[  643.414356]  [<ffffffffa030b406>] ? btrfs_mksubvol+0x3da/0x463 [btrfs]
[  643.414356]  [<ffffffff810781ac>] ? preempt_count_add+0x65/0x68
[  643.414356]  [<ffffffff811a6e97>] ? __mnt_want_write+0x62/0x77
[  643.414356]  [<ffffffffa030b55d>] btrfs_ioctl_snap_create_transid+0xce/0x187 [btrfs]
[  643.414356]  [<ffffffffa030b67d>] btrfs_ioctl_snap_create+0x67/0x81 [btrfs]
[  643.414356]  [<ffffffffa030ecfd>] btrfs_ioctl+0x508/0x20dd [btrfs]
[  643.414356]  [<ffffffff81293e39>] ? __this_cpu_preempt_check+0x13/0x15
[  643.414356]  [<ffffffff81155eca>] ? handle_mm_fault+0x976/0x9ab
[  643.414356]  [<ffffffff81091300>] ? arch_local_irq_save+0x9/0xc
[  643.414356]  [<ffffffff8119a2b0>] vfs_ioctl+0x18/0x34
[  643.414356]  [<ffffffff8119a8e8>] do_vfs_ioctl+0x581/0x600
[  643.414356]  [<ffffffff814b9552>] ? entry_SYSCALL_64_fastpath+0x5/0xa8
[  643.414356]  [<ffffffff81093fe9>] ? trace_hardirqs_on_caller+0x17b/0x197
[  643.414356]  [<ffffffff8119a9be>] SyS_ioctl+0x57/0x79
[  643.414356]  [<ffffffff814b9565>] entry_SYSCALL_64_fastpath+0x18/0xa8
[  643.414356]  [<ffffffff81091b08>] ? trace_hardirqs_off_caller+0x3f/0xaa
[  643.414356] Code: 89 83 88 00 00 00 31 c0 5b 41 5c 41 5d 5d c3 55 89 f1 48 c7 c2 98 bc 35 a0 48 89 fe 48 c7 c7 05 be 35 a0 48 89 e5 e8 13 46 dd e0 <0f> 0b 55 89 f1 48 c7 c2 9f d3 35 a0 48 89 fe 48 c7 c7 7a d5 35
[  643.414356] RIP  [<ffffffffa0352759>] assfail.constprop.41+0x1c/0x1e [btrfs]
[  643.414356]  RSP <ffff88014826fa28>
[  643.468267] ---[ end trace 6a1b3fb1a9d7d6e3 ]---

This can be easily reproduced by running xfstests with the integrity
checker enabled.

Fixes: 1ba98d086f (Btrfs: detect corruption when non-root leaf has zero item)
Cc: stable@vger.kernel.org  # 4.8+
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: Liu Bo <bo.li.liu@oracle.com>
2016-11-23 20:24:35 +00:00
Liu Bo
ef85b25e98 Btrfs: fix BUG_ON in btrfs_mark_buffer_dirty
This can only happen with CONFIG_BTRFS_FS_CHECK_INTEGRITY=y.

Commit 1ba98d0 ("Btrfs: detect corruption when non-root leaf has zero item")
assumes that a leaf is its root when leaf->bytenr == btrfs_root_bytenr(root),
however, we should not use btrfs_root_bytenr(root) since it's mainly got
updated during committing transaction.  So the check can fail when doing
COW on this leaf while it is a root.

This changes to use "if (leaf == btrfs_root_node(root))" instead, just like
how we check whether leaf is a root in __btrfs_cow_block().

Fixes: 1ba98d086f (Btrfs: detect corruption when non-root leaf has zero item)
Cc: stable@vger.kernel.org  # 4.8+
Reported-by: Jeff Mahoney <jeffm@suse.com>
Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
Reviewed-by: Filipe Manana <fdmanana@suse.com>
2016-11-23 20:23:20 +00:00
Ville Syrjälä
9780aad59c drm/i915: Simplify error handling in intel_modeset_all_pipes()
No need for the extra break statements and whatnot, just return the
error directly. And tighten the scope of the local variables while at
it.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1479141311-11904-4-git-send-email-ville.syrjala@linux.intel.com
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2016-11-23 22:21:26 +02:00
Ville Syrjälä
8d96561a0a drm/i915: Protect dev_priv->atomic_cdclk_freq with all the crtc locks
A modeset on one pipe can update dev_priv->atomic_cdclk_freq without
actually touching the hardware, in which case we won't force a modeset
on all the pipes, and thus won't lock any of the other pipes either.
That means a parallel plane update on another pipe could be looking at
a stale dev_priv->atomic_cdcdlk_freq and thus fail to notice when the
plane configuration is invalid, or potentially reject a valid update.

To overcome this we must protect writes to atomic_cdclk_freq with
all the crtc locks, and thus for reads any single crtc lock will
be sufficient protection.

Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1479141311-11904-3-git-send-email-ville.syrjala@linux.intel.com
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2016-11-23 22:20:40 +02:00
Ville Syrjälä
e0ca7a6be3 drm/i915: Fix cdclk vs. dev_cdclk mess when not recomputing things
When we end up not recomputing the cdclk, we need to populate
intel_state->cdclk with the "atomic_cdclk_freq" instead of the
current cdclk_freq. When no pipes are active, the actual cdclk_freq
may be lower than what the configuration of the planes and
pipes would require from the point of view of the software state.

This fixes bogus WARNS from skl_max_scale() which is trying to check
the plane software state against the cdclk frequency. So any time
it got called during DPMS off for instance, we might have tripped
the warn if the current mode would have required a higher than
minimum cdclk.

v2: Drop the dev_cdclk stuff (Maarten)

Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Mika Kahola <mika.kahola@intel.com>
Cc: bruno.pagani@ens-lyon.org
Cc: Daniel J Blueman <daniel.blueman@gmail.com>
Cc: Paul Bolle <pebolle@tiscali.nl>
Cc: Joseph Yasi <joe.yasi@gmail.com>
Tested-by: Paul Bolle <pebolle@tiscali.nl>
Tested-by: Joseph Yasi <joe.yasi@gmail.com> (v1)
Cc: stable@vger.kernel.org
Fixes: 1a617b7765 ("drm/i915: Keep track of the cdclk as if all crtc's were active.")
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=98214
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1479141311-11904-2-git-send-email-ville.syrjala@linux.intel.com
2016-11-23 22:19:22 +02:00
Bob Paauwe
812b1d2fe5 drm/i915/bxt: Correct dual-link MIPI port control.
For BXT, there is only one bit that enables/disables dual-link mode
and not different bits depending on which pipe is being used.

Signed-off-by: Bob Paauwe <bob.j.paauwe@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1479767046-3964-1-git-send-email-bob.j.paauwe@intel.com
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
2016-11-23 22:18:05 +02:00
Borislav Petkov
627bc29ed9 Merge tip:ras/core to pick up dependent changes
tip:ras/core contains the respective Fam17h x86 RAS bits which
amd64_edac is going to use. So merge it into the EDAC branch.

Signed-off-by: Borislav Petkov <bp@suse.de>
2016-11-23 21:13:40 +01:00
Alex Deucher
e7b8243d3e drm/amdgpu: drop is_display_hung from display funcs
Not used.

Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2016-11-23 15:13:21 -05:00