Commit graph

661,541 commits

Author SHA1 Message Date
Jens Axboe
10e6246e22 block: document the 'io_poll_delay' queue sysfs file
This was documented in the original commit, 64f1c21e86, but it
never made it into the proper location for queue sysfs files.

Signed-off-by: Jens Axboe <axboe@fb.com>
2016-11-17 22:23:02 -07:00
Michael Neuling
96ed1fe511 powerpc/mm/radix: Invalidate ERAT on tlbiel for POWER9 DD1
On POWER9 DD1, when we do a local TLB invalidate we also need to explicitly
invalidate the ERAT.

Signed-off-by: Michael Neuling <mikey@neuling.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-11-18 15:12:24 +11:00
Olof Johansson
aeb961bec7 Finally, I am really pleased to announce adding support for Exynos5433 ARMv8
SoC along with two boards.  A lot of Samsung people contributed into this
 but the final work and commits were done by Chanwoo Choi.
 
 This means that for v4.10 we got:
 1. Exynos5433 DTSI.
 2. Two boards: TM2 and TM2E.  These are (almost fully) working mobile phones.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJYIhaFAAoJEME3ZuaGi4PXu+0P/jN29SCAeg/9e/0LR0IB3/Zo
 gCW4lRtunv0q3DzC6r5Wai0fZ/HgNi/3FUxAwVhS3D1+NdXYb9Dk5FL4v3Fqzsb1
 ozbig+MC+imzIF281E3UFgSA38wn3er8xosFxeqYLqtlPT6UOv+wg6yuv2s6oYxN
 4zS1SARsnp2pHCvLjCBM5LxO5+dx10NpUr+jEAw65yQbElq2iHAKgwro4KQPP/Bn
 TU4Nx/yOiR7L/6IvgIN8zO/k/v8KyfRO/HM9yw4/ZLMO4AyX+/MhrBngHjELtxP6
 CymvAlpJC9+FumWsMh5BiG7Jx7W0rlg1askyohff+fx7rCm8K6A+oLNE+RBex17W
 vs+gsOCgHMPSdft/9eNkXd1U3c8fpZU59KW/8WFu6WSa2J0IFWmouYfwTYj80Xgk
 NBd05IiY4X+UQ3+Jyl4CC7lttxfcizFNstx3HI/x+vYgZQTFrUONIxjVYm2pYYUk
 tITYFev06qTVg21VVJhC0CZydDJzYf6jKhh6oqDz2TK1M2gpaGVbyWgMfNtZDWqR
 /2Kb058Tf6q1fLG0O9EipQgQoiMLAVFMlNi8COZxYYFIXHI7WBF8pa6ybO1FbVIO
 eDDJ80I6EjkcM3hm92jtNRYg86JQ4RDOq55vVzR9oxiaVmo3ecvWaIRFURR+OIw7
 2bITXNAL7h5HNX6mx9Bx
 =zbqq
 -----END PGP SIGNATURE-----

Merge tag 'samsung-dt64-4.10' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into next/dt64

Finally, I am really pleased to announce adding support for Exynos5433 ARMv8
SoC along with two boards.  A lot of Samsung people contributed into this
but the final work and commits were done by Chanwoo Choi.

This means that for v4.10 we got:
1. Exynos5433 DTSI.
2. Two boards: TM2 and TM2E.  These are (almost fully) working mobile phones.

* tag 'samsung-dt64-4.10' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
  arm64: dts: exynos: Add dts file for Exynos5433-based TM2E board
  arm64: dts: exynos: Add dts file for Exynos5433-based TM2 board
  arm64: dts: exynos: Add dtsi files for Samsung Exynos5433 64bit SoC

Signed-off-by: Olof Johansson <olof@lixom.net>
2016-11-17 17:53:42 -08:00
Olof Johansson
0d28c60071 Samsung DeviceTree update for v4.10:
1. Add TOPEET itop core and Elite boards, based on Exynos4412.
 2. Remove the Exynos4415 DTSI. We did not have any mainlined boards
    using it. I am also not aware of any popular out-of-tree boards using it.
 3. Add Snoop Control Unit node for Exynos4.
 4. Minor cleanups.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJYIhWlAAoJEME3ZuaGi4PXB5UP+QGT9d61jwD9uX1fe5v6OZkg
 Cwy8HxFBeYXge8T4brCW0t48G6fARFHyVwZwJU/AA/nsDuvolaoZYJ8Ovp0gD4eH
 Qoa2K9xd1wtzBHkasJk8CSpDNm48Nr1sgwt1k6H/qmOy90eBbVekIUHES+73K5DJ
 8RaT3F/lAMOXztkb8RddoNt4GTNA/2ikdnGdvkvd4+cjGMvdkmUhBcY+28m7n9u8
 r6Xir9rG5RWgrtZHh6Y6vZ0gnZaM27DjCl/MxmZjpGwwKjn0zm7AlMxLP6C+26rr
 duSkuJZq7rL4vVOk7FlqDkmG4LZXwT+C4ZEryTZ7KMuCqWVP3dSzF4Flw4x8Cif3
 cFiVuRHSiaIcq0aE1c6PNKg8N7+pqJxtRKu4sK/ce1vr5cADsZY/0sWdlZAdDJCQ
 nm9U9XYXPiiRhaZFaa3slwd0gFqNd1zL/MjKKWGBfEk8PBydyy/F6YjDwbfyURTb
 0tWCfgcLvPg0v2xw8pbsaA7vn4/PIjHD9YqraEFBJXUouZJpC+uU+5EyHiM9Rxil
 vEvvRKjmTN5vBDR913p3G+XA6L5wOts8sgjl0HZiM+6lsMkcZ4xD8xHO3kpvZwL3
 VXOWLjD0hzwo7L/Nw2ucEFF/2ToggxJC0Fnbxn0i8lU6tOnjkOp/xa4Y/Xo4UMTW
 +6o++VlUs7k6kg1+kY8F
 =qzwE
 -----END PGP SIGNATURE-----

Merge tag 'samsung-dt-4.10' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into next/dt

Samsung DeviceTree update for v4.10:
1. Add TOPEET itop core and Elite boards, based on Exynos4412.
2. Remove the Exynos4415 DTSI. We did not have any mainlined boards
   using it. I am also not aware of any popular out-of-tree boards using it.
3. Add Snoop Control Unit node for Exynos4.
4. Minor cleanups.

* tag 'samsung-dt-4.10' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
  ARM: dts: exynos: Add SCU device node to exynos4.dtsi
  ARM: dts: exynos: Remove exynos4415.dtsi
  ARM: dts: exynos: Document eMMC/SD/SDIO devices in Snow and Peach boards
  ARM: dts: exynos: Add TOPEET itop elite based board
  ARM: dts: exynos: Add TOPEET itop core board SCP package version
  ARM: dts: exynos: Add entries for sound support on Odroid-XU board
  ARM: dts: exynos: Remove "simple-bus" compatible from fimc-is node

Signed-off-by: Olof Johansson <olof@lixom.net>
2016-11-17 17:51:30 -08:00
Olof Johansson
8f871da0d9 Samsung defconfig update for v4.10:
1. Enable the Exynos gscaler driver on multi_v7 and exynos defconfigs.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJYIhS2AAoJEME3ZuaGi4PXnyQP/iAFf1u2UZYzRDFkkgKzCWSn
 7ADxF/mI1TRU4HwHe8PeSH3AEJsmNzszWYfIUnZwcv/1RP7D20qriWwebfZROJID
 aT6RhrA1vmTk6tOe7I9XoDoKyREENyDgUL4Yn2sI/1N7NuZyiQtwvYEj9I/q5UkZ
 TRe2sEHTI293LcbMi2pGdJkL6nDod4Ph2UygKaH6fn80GzqOLgnhELfKRwVWEdsP
 rzRe9MKSFmf6lWSRGI9jTv2mbXOWHuq84UsmaYhcYlgtuNdrNdO2GUEOVG0oQjK8
 io7va1b12TeHYPBwq57kla/yjhhkCKxv59cW3tARjAY98zxcv9RkTUKkeA9TWTBM
 uMOycqQinWRUYu50gPIpkAK+sVe/MCBHTgC2VejEV2TdOaocJTFJUvk3vFxOB6Q3
 7Zsu64ocIPP7f62Q3IAHAg3Q3VrI4WDkKTQtyqqP2CB5hbPlFaBCuscwGoaUsSoA
 MpS6+SSmOXJUIL8VxNFAyIdEvDT56+gTxi47SfogC8dRT5vvjP1IttU8UxtiADVB
 TbrBQCEfeVboBIQI8Vui/rT9ZERT3n+M2hJpwtWRnkW2ukWL8q2EUIXwWVhnwgHg
 oUmvy9Q/0p24n4JoQb2LtB7Vz/ikB147aTcL8uKg/efxUP4sYFzyeeD0uEBHU9Dj
 wJ2BCnctWECKilJEZpdZ
 =DPyb
 -----END PGP SIGNATURE-----

Merge tag 'samsung-defconfig-4.10' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into next/defconfig

Samsung defconfig update for v4.10:
1. Enable the Exynos gscaler driver on multi_v7 and exynos defconfigs.

* tag 'samsung-defconfig-4.10' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
  ARM: multi_v7_defconfig: Enable exynos-gsc driver as module
  ARM: exynos_defconfig: Enable exynos-gsc driver as module

Signed-off-by: Olof Johansson <olof@lixom.net>
2016-11-17 17:50:58 -08:00
Olof Johansson
4ce410a2bf NXP LPC32xx ARM SoC device tree updates for v4.10
This includes a single functional change:
 * set default parent clock for PWM1 & PWM2.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.14 (GNU/Linux)
 
 iQIcBAABAgAGBQJYIcwQAAoJEJw94nR8/maC8t8QALZZmPEUuT6EUTGOP/3pZcws
 GrXqajDjK4U3ot0cJkmmQ07VVNYilz1zpl2DiRmSKepSyhrG64dP9G5thYBamPom
 nbkzlh3U02rjjyEgvidzbd+RisAMU5JJzIUAXROaghmhoC+SF87xFnttEU4PCRTg
 iqLNJfp/6FmnRH1kccT4KwzAQhNjzcQYxqc1FY8DekRl1etHZLSHdqc5I6j2a4qO
 BNKSEbv+xSbWqu0pMm5NFSwqkxTgSW7CgCOiezhHd2x3sLpKztXrZ0Y9S2Sis1rC
 VfTEQ/FBhCvnyUF1B/Qjmz9iOM3WMrQyHBE5y5rqoVS4rf9E/8BDk0mSLmq7Keeu
 ABZzlo6qa8wez1iAXhcHww6WDT4X3wRxxerZELADhU5orubch7R5hWJzL3wUp5N0
 Zsxs5nhJjCAIPx5rI8vVz12EFu1XMpbc8cGX1Ah6nD5eVLE3YiMjQ+w8cJ+LI5bU
 YTx4Co0CuyJItp2GUOzeXzTBzN/0vz1TZN4csLd5r6OVfSFXW0tG9CwYrnT8R1mA
 E4DISdwWbbn3aAN/19g2Z0PwQzAl8QlQb2VWz16zzs4Ob0vl+jjU5PD70br17XiS
 8CPKci0POBwRpx9K9j/uny5SWfmBpldvtlvicHCtmSeniuKkewtQhjJOZwgVCygQ
 2dVGfgpXVYY1DjLNvLtf
 =9l30
 -----END PGP SIGNATURE-----

Merge tag 'lpc32xx-dt-v4.10' of https://github.com/sylemieux/linux-lpc32xx into next/dt

NXP LPC32xx ARM SoC device tree updates for v4.10

This includes a single functional change:
* set default parent clock for PWM1 & PWM2.

* tag 'lpc32xx-dt-v4.10' of https://github.com/sylemieux/linux-lpc32xx:
  ARM: dts: lpc32xx: set default parent clock for pwm1 & pwm2

Signed-off-by: Olof Johansson <olof@lixom.net>
2016-11-17 17:49:33 -08:00
Helge Deller
4aaa4065f7 scsi: mptfusion: Fix printk continuations
Fix the printk continuations when running the mptfusion driver.
This patch brings the capabilities into one single syslog line again:
   mptbase: ioc1: Initiating bringup
   ioc1: LSI53C1030 B2: Capabilities={Initiator,Target}
   scsi host3: ioc1: LSI53C1030 B2, FwRev=01032341h, Ports=1, MaxQ=255, IRQ=67

Tested on a parisc C8000 machine.

Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2016-11-17 20:49:29 -05:00
Olof Johansson
56d027b417 NXP LPC32xx ARM SoC cleanup for v4.10
This includes a few cleanup changes:
 * remove unused header file mach/irqs.h;
 * remove unused header file clock.h.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.14 (GNU/Linux)
 
 iQIcBAABAgAGBQJYIecDAAoJEJw94nR8/maCJM8P/RqVcbXsSOn9Lz1UVR2ovhh5
 kBaG+Nr6KwPGIiXUOTRTPu4VRLyu6WYds4uEs3hHJrqcPufjJWsTY6bvfzDdkvEw
 38zyV7E0//+3yDcDwjUJzUF32cNmslpKpA8hP2U5i7u8N7wjopUccWEsa0kfWBQZ
 5GE7FpdyBXAvqXVKr9x/htFyoGpk7c8oGUkON264uIPa1YssIVBkfPb2z/oUiUx5
 dAVV/ywWsPGfLWuwLhCNdZLivJ01UB/Fl+Z05KKRAmaX8pUTwkaG0/LSVw3+52EP
 5/glMDKLs1k6eVH172w+fUwJ5/M4TYwXzkEnzhv7aR0QPLrliD7XPxdj7jO4T9O8
 8YoL5bbb71J/mK3OsdhBl1vojrdd2gJC8tf6PDGuEn/PuO1f/FRPHoL5O+Hm3T/s
 uP8ep0URuWXHtpynyzxysbCU6M3aaybUuYBarmNVnXR00/ul0r2b2uQ5Tt2HOzFR
 EXBdNhxPJIye7gq7nnaj/V1TALgB8p5oOE0GpqyhKaIXaTcFT8w1k6OYJXm9Ma9C
 KoUTX/qKl/QDnQvaSi7i+BaeedMBhS2EjjOeQ6bdFbKkbVoBYF7T2heXDr6tcLhN
 Fq5VAbBVvrYQ6f6b4icjRekNdmgeRQUxfz7pUotYzzueAHOycKwb/3CB2PmiKuz+
 /BPlv4V0hr23qJH/nL8N
 =Sl5Q
 -----END PGP SIGNATURE-----

Merge tag 'lpc32xx-cleanup-v4.10' of https://github.com/sylemieux/linux-lpc32xx into next/soc

NXP LPC32xx ARM SoC cleanup for v4.10

This includes a few cleanup changes:
* remove unused header file mach/irqs.h;
* remove unused header file clock.h.

* tag 'lpc32xx-cleanup-v4.10' of https://github.com/sylemieux/linux-lpc32xx:
  ARM: lpc32xx: remove unused header file clock.h
  ARM: lpc32xx: remove unused header file mach/irqs.h

Signed-off-by: Olof Johansson <olof@lixom.net>
2016-11-17 17:47:44 -08:00
Olof Johansson
62c2f3f67d UniPhier ARM64 SoC DT updates for v4.10
- Switch CPU enable-method from spin-table to PSCI
 - Add OPP tables to support generic cpufreq driver
 - Misc fixes
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJYHfLxAAoJED2LAQed4NsGwnIP/3hE5jd52BkIf+LnM5muoiXd
 A8FcqOQgj6zix6lrmAwQEGp+ociUiMYpQXgj8B5K1UwPKVRYjwvc1EuRQriI1btF
 Kp8IIQnepLK2nRLliHl3w55bO7pdxx53rqeoF8HXF6FvkTMS1JycXI0pkZp8VkDQ
 rDQ1LqCxBWtdTccOQgIUF615YysxpbrHZEbg7fYGtDmeEcu1e1c5VAnj0xgefWiY
 C94iPba3HYKPQkn+6ueQR2M2VinNvl6V+m9FgmqcoQG5jDTyCM52DMD2h0RJMI9i
 NsqxRfQAZc5B4ReyuFSDEKHwbqRwCx2o6LMWuyqCx2deRcHRS0hy6DiEnnaKheeC
 Fqr4jnQwlE9lqXiCAklz1wNfO7bDdbWIfokRfDYxvBAQIQPbi2FUkDTYWqjoEU+8
 VT6ZuPGYIjzDaZEMyVqN0PHj5mp4eQ4oBPDhyXrWU3d06Ky3I6yKMoQ43/inj1RC
 BlA/OlsDr/uo2oYReqZGTSIGNYEAGoAqalV9paNDZxaIizzUHdRxoO97at7oHTHH
 5HOCB3XP62cWFoE3t1yEoJBn6z/IrxCzTa8UkM+j/IMWT1xsoi3389u+5OOVgN7Y
 oPi1pgdi82b6aD9QW4BG/RN0Pr+xTywPqU6omd14lKTlCxZfCOjLGrn2p0myg3GC
 wbe4n2uoIL9AAnuYSfDg
 =K2GC
 -----END PGP SIGNATURE-----

Merge tag 'uniphier-dt64-v4.10' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-uniphier into next/dt64

UniPhier ARM64 SoC DT updates for v4.10

- Switch CPU enable-method from spin-table to PSCI
- Add OPP tables to support generic cpufreq driver
- Misc fixes

* tag 'uniphier-dt64-v4.10' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-uniphier:
  arm64: dts: uniphier: make compatible of syscon nodes SoC-specific
  arm64: dts: uniphier: add CPU clocks and OPP tables for LD20 SoC
  arm64: dts: uniphier: add CPU clock and OPP table for LD11 SoC
  arm64: dts: uniphier: increase register region size of sysctrl node
  arm64: dts: uniphier: switch over to PSCI enable method

Signed-off-by: Olof Johansson <olof@lixom.net>
2016-11-17 17:46:58 -08:00
Olof Johansson
a23ea95789 Linux 4.9-rc3
-----BEGIN PGP SIGNATURE-----
 
 iQEcBAABAgAGBQJYFQwAAAoJEHm+PkMAQRiGr8YH/0urDFZm/RFu752rSawF7iVM
 nx9Ck03YkRiMRZfdzPARbHJts7lhLG1rvsT50VQNMK1sVv0BXcrnJnDu49xV+dLj
 DqXWvYGtdTCpAd34Am37pX/rrRl11vdJgS2VgprmbytkM8FD0xEe+aDKxnnmuALo
 bggYDhMrJik3/UXG0zVfefKZJFLNAJiZv9AgWgkCR+bo861bu3UFn47tN1jGXOOl
 QyFl5t7ggesojA5Q1U9hTrk1gS9Ia9it3Elyzfqb66lUdyf001I1nbUA/hNYyDXD
 HU9dj3agvVXjvnDjyDR4/k86FA+EEEwSgk5CBTCVe30dLKnojFyb7FWZg72utg4=
 =CHER
 -----END PGP SIGNATURE-----

Merge tag 'v4.9-rc3' into next/dt64

Linux 4.9-rc3

* tag 'v4.9-rc3': (292 commits)
  Linux 4.9-rc3
  x86/smpboot: Init apic mapping before usage
  ACPICA: Dispatcher: Fix interpreter locking around acpi_ev_initialize_region()
  ACPICA: Dispatcher: Fix an unbalanced lock exit path in acpi_ds_auto_serialize_method()
  ACPICA: Dispatcher: Fix order issue of method termination
  ARC: module: print pretty section names
  ARC: module: elide loop to save reference to .eh_frame
  ARC: mm: retire ARC_DBG_TLB_MISS_COUNT...
  ARC: build: retire old toggles
  ARC: boot log: refactor cpu name/release printing
  ARC: boot log: remove awkward space comma from MMU line
  ARC: boot log: don't assume SWAPE instruction support
  ARC: boot log: refactor printing abt features not captured in BCRs
  ARCv2: boot log: print IOC exists as well as enabled status
  ubifs: Fix regression in ubifs_readdir()
  ubi: fastmap: Fix add_vol() return value test in ubi_attach_fastmap()
  MAINTAINERS: Add entry for genwqe driver
  VMCI: Doorbell create and destroy fixes
  GenWQE: Fix bad page access during abort of resource allocation
  vme: vme_get_size potentially returning incorrect value on failure
  ...
2016-11-17 17:46:45 -08:00
Olof Johansson
a8acd5a14d UniPhier ARM SoC DT updates for v4.10
- Add OPP tables to support generic cpufreq driver
 - Use more clocks/resets properties
 - Misc fixes and cleanups
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJYHfI6AAoJED2LAQed4NsGJr8P/iz2m4XuefXZj8GAuIScD1D3
 CWSbsr9qG0w77AT+tae4yND9G5QSI6qHWZMmCWsv7GLnjKXzOzjRs0nlfflhOFaC
 JrZAJrrPfpIuqITMgSPkljQ1uwW5hpJ0oS49y2LI6r2vwfTII/TezgVJ3ix43i0r
 Ngx9/wX9sQWZBJYi54hsVMgNv3JzN3LXdYjGMDvLBCNLwo437m/yLF6z2ApzGj03
 kEozI7jiw61jwdu9nPnvfsjxTADiIdW8114+ldzK5jGIgU7IvLIDIqa6QSbkIM0W
 KnzFXOlyMofd7Gkyj0BZd4GGdrsWgK2MbXjSZA3XiwrU81G28E+2ANaQKiaod+kO
 5tRgBf7pWfKS+21laQmKjxqTAtDVw3fjwkF8anJ5e482lB4r6T/DWh6vIc27grtP
 N1eJ7WkgrErOhVZVNZ6AqvMLsZdDkHS9R1ZCk3rwCSptX0raJhtScqWqTFH7erWa
 MFjT+8znHDF4fXX+i+fxWPMWoyJvZYIAevr0wtPpp+VbBl1GyAjAt5sntorFBXSy
 35l4TgI11PCbTI6DCc/uV9CihJjZP2UGo1YC92SAIuvUqArfvsHby/yVjQlcsnzC
 BAJZn1dnItkgzOb7np1vbl3YYRRJcN8eGkanSZ+DNaerhGKnk/KKzxUj09RfEUDp
 51MOA2r2+w+SLUHurn1a
 =DdcH
 -----END PGP SIGNATURE-----

Merge tag 'uniphier-dt-v4.10' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-uniphier into next/dt

UniPhier ARM SoC DT updates for v4.10

- Add OPP tables to support generic cpufreq driver
- Use more clocks/resets properties
- Misc fixes and cleanups

* tag 'uniphier-dt-v4.10' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-uniphier:
  ARM: dts: uniphier: make compatible of syscon nodes SoC-specific
  ARM: dts: uniphier: add clocks/resets to EHCI nodes of sLD3 SoC
  ARM: dts: uniphier: remove redundant serial fifo-size properties
  ARM: dts: uniphier: make 32bit SoC DTSI linear
  ARM: dts: uniphier: add CPU clocks and OPP table for PXs2 SoC
  ARM: dts: uniphier: add CPU clocks and OPP table for Pro5 SoC
  ARM: dts: uniphier: increase register region size of sysctrl node

Signed-off-by: Olof Johansson <olof@lixom.net>
2016-11-17 17:45:16 -08:00
Olof Johansson
c9905f0125 Linux 4.9-rc3
-----BEGIN PGP SIGNATURE-----
 
 iQEcBAABAgAGBQJYFQwAAAoJEHm+PkMAQRiGr8YH/0urDFZm/RFu752rSawF7iVM
 nx9Ck03YkRiMRZfdzPARbHJts7lhLG1rvsT50VQNMK1sVv0BXcrnJnDu49xV+dLj
 DqXWvYGtdTCpAd34Am37pX/rrRl11vdJgS2VgprmbytkM8FD0xEe+aDKxnnmuALo
 bggYDhMrJik3/UXG0zVfefKZJFLNAJiZv9AgWgkCR+bo861bu3UFn47tN1jGXOOl
 QyFl5t7ggesojA5Q1U9hTrk1gS9Ia9it3Elyzfqb66lUdyf001I1nbUA/hNYyDXD
 HU9dj3agvVXjvnDjyDR4/k86FA+EEEwSgk5CBTCVe30dLKnojFyb7FWZg72utg4=
 =CHER
 -----END PGP SIGNATURE-----

Merge tag 'v4.9-rc3' into next/dt

Linux 4.9-rc3

* tag 'v4.9-rc3': (292 commits)
  Linux 4.9-rc3
  x86/smpboot: Init apic mapping before usage
  ACPICA: Dispatcher: Fix interpreter locking around acpi_ev_initialize_region()
  ACPICA: Dispatcher: Fix an unbalanced lock exit path in acpi_ds_auto_serialize_method()
  ACPICA: Dispatcher: Fix order issue of method termination
  ARC: module: print pretty section names
  ARC: module: elide loop to save reference to .eh_frame
  ARC: mm: retire ARC_DBG_TLB_MISS_COUNT...
  ARC: build: retire old toggles
  ARC: boot log: refactor cpu name/release printing
  ARC: boot log: remove awkward space comma from MMU line
  ARC: boot log: don't assume SWAPE instruction support
  ARC: boot log: refactor printing abt features not captured in BCRs
  ARCv2: boot log: print IOC exists as well as enabled status
  ubifs: Fix regression in ubifs_readdir()
  ubi: fastmap: Fix add_vol() return value test in ubi_attach_fastmap()
  MAINTAINERS: Add entry for genwqe driver
  VMCI: Doorbell create and destroy fixes
  GenWQE: Fix bad page access during abort of resource allocation
  vme: vme_get_size potentially returning incorrect value on failure
  ...
2016-11-17 17:44:58 -08:00
Johannes Thumshirn
208da78e8e scsi: libfc: fix seconds_since_last_reset miscalculation
Commit 540eb1eef0 ("scsi: libfc: fix seconds_since_last_reset calculation")
removed the use of 'struct timespec' from fc_get_host_stats(). This broke the
output of 'fcoeadm -s' after kernel 4.8-rc1.

Signed-off-by: Johannes Thumshirn <jthumshirn@suse.de>
Cc: <stable@vger.kernel.org> # v4.8+
Fixes: 540eb1eef0 ("scsi: libfc: fix seconds_since_last_reset calculation")
Acked-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Bart Van Assche <bart.vanassche@sandisk.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2016-11-17 20:44:51 -05:00
Olof Johansson
fb5d492d23 STM32 DT updates for v4.10, round 1.
Highlights:
 ----------
  - Add LSI and LSE clocks support for STM32F429
  - Add GPIO IRQ support for STM32F429
  - Declare push button as GPIO keys on STM32F429 boards
  - Add DMA supports on USART1 & USART3 on STM32F429
  - Add Ethernet fixes
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJYHJcxAAoJEH+ayWryHnCFJt4P/2P4d2b6O7MoiEkzh1stF0on
 r/RbnFIkzhRMKDxMZNCalapidiKwnzFoFOnpVx+8xzNAVSClM+FFt6yHGXz4EIeZ
 xvjSMpg5OV+LzHp0ur3ZsROLUIWwyXiYkaoZdPGJFcQ0RRLPfIglA8JIf5HIUelN
 0ZRnnheNggWZO4vhYS0oRONQC0bkzWUMLv8izSgKYsbaYPb3q6A4JuMXX2534hPf
 b4TI6bnpkmxzTYLaQLpNlHHstF6qJgsKH4WDDSBbNrQjPDY4J+hC3VJDPrUopffR
 UnUi9C8dURLZpKFRo+Y+OsZuQp2w0rImxt7jmH9rpKCaghoMLuf6JRJnp31oHH6C
 6eUbGbJgW4XHrMjjOKhPkBpOeqYhIuNEMzAdwYxAxCbNhn5TWh/6aqATA6esMykQ
 Rzghe3SkBhTKCTJ/wME9g4N4Er5XdmcJB3tBqqxp6ZqC7M7l4iZgd9mguTzhrP1F
 gnX0Bb588EO8tPJuRdFaTKFa+CdMkkHuFdbucAlu0CCCF3qrqPWCzG23oBvHvUxY
 K8QaPQfAD7yOqgrVnkrmENfk4rUsV5zzr6esk3EUUIEbM97MQN90JT64FcC1MOkG
 iKwIElAJTuD/an2qU9IOCkUN5r9LuWvtFLVMEa9fjCTschReKZIh/J51hkwlP3NN
 vDQH15AE1HAZKgZA/LV+
 =tYgi
 -----END PGP SIGNATURE-----

Merge tag 'stm32-dt-for-v4.10-1' of git://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32 into next/dt

STM32 DT updates for v4.10, round 1.

Highlights:
----------
 - Add LSI and LSE clocks support for STM32F429
 - Add GPIO IRQ support for STM32F429
 - Declare push button as GPIO keys on STM32F429 boards
 - Add DMA supports on USART1 & USART3 on STM32F429
 - Add Ethernet fixes

* tag 'stm32-dt-for-v4.10-1' of git://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32:
  ARM: dts: stm32f429: add LSI and LSE clocks
  ARM: dts: stm32f429: remove Ethernet wake on Lan support
  ARM: dts: stm32f429: Fix Ethernet node on Eval Board
  ARM: dts: stm32f429: Align Ethernet node with new bindings properties
  ARM: DT: stm32: move dma translation to board files
  ARM: DT: STM32: add dma for usart3 on F429
  ARM: DT: STM32: add dma for usart1 on F429
  ARM: dts: Declare push button as GPIO key on stm32f429 boards
  ARM: dts: Add GPIO irq support to STM32F429

Signed-off-by: Olof Johansson <olof@lixom.net>
2016-11-17 17:42:31 -08:00
Olof Johansson
42494501f5 Renesas ARM Based SoC Updates for v4.10
Enhancements:
 * Basic support for r8a7743 SoC; only SoC code so far
 * Select errata 798181 for SoCs with CA15 cores
 
 Clean-up:
 * Consolidate R8A7743 and R8A779[234] machine definitions
 
 Documentation:
 * Add Marzen, Gose and Alt board part numbers to DT bindings
 * Document SK-RZG1M board
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJYHFSAAAoJENfPZGlqN0++i1gQAJvDzERhzjIl8ukWmnnVflIk
 EtlT3PaoFtmstecrvMY5W8Hm7ViRUlBGbBDrE+c7WH4IHkEVbFTUef6nzAhXmSp6
 ZgIOx3J1dYz1uWMCi5lBU6vZirut7VvyqWfIlMceSsq2WMS5TobM/rORvh4N0yQ1
 MuhsxIuuuwJe0neMAs0lFeKFUoWm7RxFen6G6vXZWVg9INxKSKGKvh8+8IbhWP2H
 WjMTUYASneLmZ5nIlyL8LTauOczsJitgHgYtoCCUMDFCcDKMth6HiMvZztny5sTs
 Sk+SH/MKDo9fZWXWxHh0mS/bFIbdiY4/BfK0S2LlRo8MQMS0d3pKPIvD4gRT7Wyq
 2JTuf4kuehI9+VEY0NNZH1HJnsFGN7ZB2C99eOkcvVsm324yhxy9MgxioyBYEgsY
 ckr9/nbxvkYGI326AN4pvE6JF9oqnRdQiHQrRHg5sIuL2hpusALWlOeQnnnrKGQE
 Xo+F9+DfhFTLosxqjq6abCwJ8t97uake0+ZRFUiJpjAHjc5se9qIN9njmanTCUhd
 UwMHVgTs5zYLPCGjmbY+jw8NwLp5UWHTgfOewUA0399mcj/KRo06uB8pUYkVEVZz
 s5FUnsOAhE7A2aNfAJWu4ecKIf5rvnE+ErIW/nYRp/sbTc9+zZkEVSAiMGQFlXcu
 BOS+An3C04D6m1CY+tOv
 =CqVV
 -----END PGP SIGNATURE-----

Merge tag 'renesas-soc-for-v4.10' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/soc

Renesas ARM Based SoC Updates for v4.10

Enhancements:
* Basic support for r8a7743 SoC; only SoC code so far
* Select errata 798181 for SoCs with CA15 cores

Clean-up:
* Consolidate R8A7743 and R8A779[234] machine definitions

Documentation:
* Add Marzen, Gose and Alt board part numbers to DT bindings
* Document SK-RZG1M board

* tag 'renesas-soc-for-v4.10' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
  ARM: shmobile: r8a7779/marzen: Add board part number to DT bindings
  ARM: shmobile: select errata 798181 for SoCs with CA15 cores
  ARM: shmobile: Consolidate R8A7743 and R8A779[234] machine definitions
  ARM: shmobile: r8a7793/gose: Add board part number to DT bindings
  ARM: shmobile: r8a7794/alt: Add board part number to DT bindings
  ARM: shmobile: document SK-RZG1M board
  ARM: shmobile: r8a7743: basic SoC support
  ARM: shmobile: only call rcar_gen2_clocks_init() if present
  ARM: shmobile: Sort Kconfig selections

Signed-off-by: Olof Johansson <olof@lixom.net>
2016-11-17 17:41:30 -08:00
Olof Johansson
403936bb96 Renesas ARM Based SoC DT Updates for v4.10
Clean-Ups and Corrections:
 * Removed Z clock from r8a7794 SoC; it is not present in hardware
 * Use generic pinctrl properties in SDHI nodes in gose board
 * Correct W=1 dtc warnings on r8a7794 SoC
 * Correct DU reg property on r8a7779 SoC
 * Correct SCIFB reg properties to cover all registers
 
 Enhancements:
 * Configure pinmuxing for the DU0 input clock on the Marzen board
 * Enable VIN 0 - 2 on r8a7793 SoC
 * Enable HDMI input on Koelsch and Lager boards
 * Enable SDHI1 on rskrza1 board
 * Add MMCIF nodes to r7s72100 SoC
 * Add MSIOF clocks to r8a7792 SoC
 * Enable UHS for SDHI 0 & 1 on koelsch and alt boards
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJYHFcMAAoJENfPZGlqN0++0YQQAKxHY52/hFqQAwUnfnFvOT0z
 r3lb+MxTvLCi3xf1mM0JlnrughuvHAsQV0zv6DVo8eU9lKefSw9p/3/ROmfk1qU4
 HR2pYE/1lAbDpnUBQEIO19XXerlrQQoN6bgAoGdHo+U4w+v4P3kG0RCqcIjelSPt
 w9IUW9E9Tf24ZtS9Rn2N58JTOcvpPOP8TYvP8TL6Jp5eyngiWNcj0rOwKeiAmYd+
 OsRhQ2FJjzdwYdQFdTSf3R5XeiUhg8HuCKiOLTIn/2o3AfVPxtC3p4b9NxCArvOv
 +Y1um0y2VWClPTeDpbBC9whFx0hvqDF+rftiu1hZfr5vRGR0FYjEu7z2bvWAvIOT
 qhN+BCBIfhsV1TDxqAmdaKSaBlxFLk+Z4LAMtvKrzVKf0f2XZQ7NoycIOoqmh57T
 ARdcAwYRiPZvw3UUZKMqbL6U5rhlW9JJmnNC3EQfluR3R/SmGi2ZGdmqlLlfbKjp
 U28OuzaSIP7Iou/8KmLHRUQvuBacaBB9fqDn6gDpgEVTSZTDOpvt0r1t0ovFC+F7
 q/9loxKxva+I+rE1lAA7ejZ2VXb5d3AUY1Sfsw+aw0fv8q6rfU+HEM5/ppEPijDQ
 YRsp4tRH17/lM9Go4VVH2Txl/ZK5tX/trXNJPFToG2/fJc5EWvCug6pF+p6QKIuf
 BnqbAZFe9DWRBXpyLb/A
 =Tkdc
 -----END PGP SIGNATURE-----

Merge tag 'renesas-dt-for-v4.10' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/dt

Renesas ARM Based SoC DT Updates for v4.10

Clean-Ups and Corrections:
* Removed Z clock from r8a7794 SoC; it is not present in hardware
* Use generic pinctrl properties in SDHI nodes in gose board
* Correct W=1 dtc warnings on r8a7794 SoC
* Correct DU reg property on r8a7779 SoC
* Correct SCIFB reg properties to cover all registers

Enhancements:
* Configure pinmuxing for the DU0 input clock on the Marzen board
* Enable VIN 0 - 2 on r8a7793 SoC
* Enable HDMI input on Koelsch and Lager boards
* Enable SDHI1 on rskrza1 board
* Add MMCIF nodes to r7s72100 SoC
* Add MSIOF clocks to r8a7792 SoC
* Enable UHS for SDHI 0 & 1 on koelsch and alt boards

* tag 'renesas-dt-for-v4.10' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas: (29 commits)
  ARM: dts: r8a7794: remove Z clock
  ARM: dts: r8a7779: marzen: Configure pinmuxing for the DU0 input clock
  ARM: dts: sh73a0: Remove skeleton.dtsi inclusion
  ARM: dts: r8a7740: Remove skeleton.dtsi inclusion
  ARM: dts: r8a7779: Remove skeleton.dtsi inclusion
  ARM: dts: r8a7778: Remove skeleton.dtsi inclusion
  ARM: dts: emev2: Remove skeleton.dtsi inclusion
  ARM: dts: r8a7779: Fix DU reg property
  ARM: dts: r8a7793: Enable VIN0-VIN2
  ARM: dts: koelsch: add HDMI input
  ARM: dts: lager: Add entries for VIN HDMI input support
  ARM: dts: rskrza1: add sdhi1 DT support
  ARM: dts: r7s72100: add sdhi to device tree
  ARM: dts: r8a7794: Fix W=1 dtc warnings
  ARM: dts: gose: use generic pinctrl properties in SDHI nodes
  ARM: dts: r7s72100: add sdhi clock to device tree
  ARM: dts: r7s72100: add mmcif to device tree
  ARM: dts: r8a7792: add MSIOF support
  ARM: dts: r8a7792: add MSIOF clocks
  ARM: dts: wheat: add DU support
  ...

Signed-off-by: Olof Johansson <olof@lixom.net>
2016-11-17 17:40:27 -08:00
Olof Johansson
cb7f3a3e11 Renesas ARM64 Based SoC DT Updates for v4.10
Enablement:
 * Enable On-board eMMC
 * Enable SDHI 0 & 3 with UHS
 * Add SYS-DMAC controller nodes to r8a7796 SoC
 * Populate EXTALR on r8a7796/salvator-x board; used by watchdog
 * Add DU LVDS output endpoint on r8a7795/salvator-x board
 * Add bias setting for USB1 pins on r8a7795/salvator-x board
 
 Clean-Up:
 * Remove FCP SoC-specific compatible strings
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJYHFKPAAoJENfPZGlqN0++vV0P/35lNUV/3lU45gwUdTGb1rQ5
 nwy2Rr0r0A/BtUKBjUNSYh/iDWN7koS102QFcE1wtBxhiq0t61ZtiBV5XTgHevfK
 ns+N5mN/8TyS60JD3LS1vgiiOtPjMCi1e76SNdtJTQ2XoQ98I5G7lliXAlYACTuS
 h/92Twk0AYB/a9AVwuVTQRwhc2ReYgiSwhVOp54VIMi2FXVLqPJ6yq4BalzDh3PA
 W4//0xAP/IwYomae40tzHs887OA2jYFgrXMJHmjkmaEyIqc9QtKnsBos6ig/qDsA
 YtXn9+D0kWGLmXBZCu3qirS6nT6utic/UrB/usm+m9wA49qSZpHhjlAgFZmpcqBf
 K5wdjjbMKx8GpfenBLcT0D5mSWsgMXCGWeP3kG1OHY6zQegQwguCNBaaZqdxCg7s
 MshdeJ0zWouSGWSuiPqosrev2YtGKVaQBHJhAgEkf7/rIgF7u/c5/phTmoejtXBK
 V27ixhwagRI/SFijmaKGLVG57k3+OWqXIBZpj41YfrxQ5CFJOiGjpty0hBnC6Gsz
 jqE0W4K83KWqb8baS3uyuWzv6m9Gjj1M/c8ODmtNgE1C4uRTNlGiLqgu/OGCPEZf
 +Oq/fk3Sr3HLlpl4XhOEwwiT/3AJggugopVRhWP2EGaEprBML/UAaRjHJFb25G7P
 cjOLx5Q185RkCmFyWrRc
 =tIEp
 -----END PGP SIGNATURE-----

Merge tag 'renesas-arm64-dt-for-v4.10' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/dt64

Renesas ARM64 Based SoC DT Updates for v4.10

Enablement:
* Enable On-board eMMC
* Enable SDHI 0 & 3 with UHS
* Add SYS-DMAC controller nodes to r8a7796 SoC
* Populate EXTALR on r8a7796/salvator-x board; used by watchdog
* Add DU LVDS output endpoint on r8a7795/salvator-x board
* Add bias setting for USB1 pins on r8a7795/salvator-x board

Clean-Up:
* Remove FCP SoC-specific compatible strings

* tag 'renesas-arm64-dt-for-v4.10' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
  arm64: renesas: r8a7796: add SYS-DMAC controller nodes
  arm64: dts: r8a7795: salvator-x: add bias setting for usb1_pins
  arm64: dts: r8a7796: salvator: enable on board eMMC
  arm64: dts: r8a7795: salvator: enable on-board eMMC
  arm64: dts: r8a7796: salvator-x: enable UHS for SDHI 0 & 3
  arm64: dts: r8a7796: salvator-x: enable SDHI0 & 3
  arm64: dts: r8a7796: add SDHI nodes
  arm64: dts: r8a7795: Remove FCP SoC-specific compatible strings
  dt-bindings: media: renesas-fcp: Remove SoC-specific compatible strings
  arm64: dts: r8a7795: salvator-x: Add DU LVDS output endpoint
  arm64: dts: r8a7796: salvator-x: Populate EXTALR
  arm64: dts: r8a7795: salvator-x: enable UHS for SDHI 0 & 3

Signed-off-by: Olof Johansson <olof@lixom.net>
2016-11-17 17:39:56 -08:00
Hannes Reinecke
0910d8bbdd scsi: aacraid: switch to pci_alloc_irq_vectors
Use pci_alloc_irq_vectors and drop the hand-crafted interrupt affinity
routines.

Signed-off-by: Hannes Reinecke <hare@suse.com>
Cc: Adaptec OEM Raid Solutions <aacraid@microsemi.com>
Reviewed-by: Raghava Aditya Renukunta <raghavaaditya.renukunta@microsemi.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2016-11-17 20:29:55 -05:00
Tanmay Jagdale
254df038e5 i2c: xlp9xx: ACPI support for I2C clients
The ACPI companion of the adapter has to be set for I2C controller
code to read and attach the slave devices described in the ACPI table
with the I2CSerialBus resource descriptor. Used ACPI_COMPANION_SET
macro to set this.

Signed-off-by: Tanmay Jagdale <tanmay.jagdale@broadcom.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2016-11-18 02:25:38 +01:00
Jyri Sarha
a291b6b3d2 ARM: dts: am335x-boneblack: Add blue-and-red-wiring -property to LCDC node
Add blue-and-red-wiring -property to LCDC node. Also adds comments on
how to get support 24 bit RGB mode. After this patch am335x-boneblack
support RGB565, BGR888, and XBGR8888 color formats. See details in
Documentation/devicetree/bindings/display/tilcdc/tilcdc.txt.

The BBB has straight color wiring from am335x to tda19988, however the
tda19988 can be configured to cross the blue and red wires. The
comments show how to do that with video-ports property of tda19988
node and how to tell LCDC that blue and red wires are crossed, with
blue-and-red-wiring LCDC node property. This changes supported color
formats from 16 bit RGB and 24 bit BGR to 16 bit BGR and 24 bit RGB.

Signed-off-by: Jyri Sarha <jsarha@ti.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2016-11-17 17:24:54 -08:00
Masahiro Yamada
b92b7dbc71 i2c: uniphier-f: rename jump label to follow coding style guideline
Documentation/CodingStyle recommends to use label names which say
what the goto does or why the goto exists.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2016-11-18 02:16:08 +01:00
Johannes Thumshirn
a0f4bd7f2a scsi: fc: move FC transport's bsg code to bsg-lib
Now that all conversions are done, move the FibreChannel bsg code over
to the bsg library.

This patch is derived from work done by Mike Christie in 2011 [1] but
only the iscsi parts got merged back then.

[1] http://marc.info/?l=linux-scsi&m=131149780921009&w=2

Signed-off-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2016-11-17 20:15:26 -05:00
Johannes Thumshirn
fb6f7c8d8a block: add bsg_job_put() and bsg_job_get()
Add bsg_job_put() and bsg_job_get() so don't need to export
bsg_destroy_job() any more.

Signed-off-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2016-11-17 20:15:26 -05:00
Johannes Thumshirn
06548160df scsi: fc: use bsg_job_done
fc_bsg_jobdone() and bsg_job_done() are 1:1 copies now so use the
bsg-lib one instead of the FC private implementation.

Signed-off-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Acked-by: Tyrel Datwyler <tyreld@linux.vnet.ibm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2016-11-17 20:15:26 -05:00
Johannes Thumshirn
6aa858cd33 scsi: fc: use bsg_softirq_done
bsg_softirq_done() and fc_bsg_softirq_done() are copies of each other, so
ditch the fc specific one.

Signed-off-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2016-11-17 20:15:26 -05:00
Johannes Thumshirn
c00da4c90f scsi: fc: Use bsg_destroy_job
fc_destroy_bsgjob() and bsg_destroy_job() are now 1:1 copies, so use the
latter. As bsg_destroy_job() comes from bsg-lib we need to select it in
Kconfig once CONFOG_SCSI_FC_ATTRS is active.

Signed-off-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2016-11-17 20:15:25 -05:00
Johannes Thumshirn
75cc8cfc6e scsi: change FC drivers to use 'struct bsg_job'
Change FC drivers to use 'struct bsg_job' from bsg-lib.h instead of
'struct fc_bsg_job' from scsi_transport_fc.h and remove 'struct
fc_bsg_job'.

Signed-off-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Acked-by: Tyrel Datwyler <tyreld@linux.vnet.ibm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2016-11-17 20:15:25 -05:00
Johannes Thumshirn
bf0f2d380f block: add reference counting for struct bsg_job
Add reference counting to 'struct bsg_job' so we can implement a reuqest
timeout handler for bsg_jobs, which is needed for Fibre Channel.

Signed-off-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2016-11-17 20:15:25 -05:00
Johannes Thumshirn
ad7660cc1e scsi: fc: implement kref backed reference counting
Implement kref backed reference counting instead of rolling our own. This
elimnates the need of the following fields in 'struct fc_bsg_job':
* ref_cnt
* state_flags
* job_lock
bringing us close to unification of 'struct fc_bsg_job' and 'struct bsg_job'.

Signed-off-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2016-11-17 20:15:25 -05:00
Johannes Thumshirn
7ac65007c2 scsi: libfc: don't set FC_RQST_STATE_DONE before calling fc_bsg_jobdone()
Don't set FC_RQST_STATE_DONE before calling fc_bsg_jobdone() as
fc_bsg_jobdone() calls blk_complete_requeust() which raises a soft-IRQ
that ends up in fc_bsg_sofirq_done() and fc_bsg_softirq_done() sets the
FC_RQST_STATE_DONE flag.

Signed-off-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2016-11-17 20:15:25 -05:00
Johannes Thumshirn
1d69b1222a scsi: fc: provide fc_bsg_to_rport() helper
Provide fc_bsg_to_rport() helper that will become handy when we're
moving from struct fc_bsg_job to a plain struct bsg_job. Also move all
LLDDs to use the new helper.

Signed-off-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Acked-by: Tyrel Datwyler <tyreld@linux.vnet.ibm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2016-11-17 20:15:25 -05:00
Johannes Thumshirn
cd21c605b2 scsi: fc: provide fc_bsg_to_shost() helper
Provide fc_bsg_to_shost() helper that will become handy when we're
moving from struct fc_bsg_job to a plain struct bsg_job. Also use this
little helper in the LLDDs.

Signed-off-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Acked-by: Tyrel Datwyler <tyreld@linux.vnet.ibm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2016-11-17 20:15:25 -05:00
Johannes Thumshirn
1abaede715 scsi: fc: Export fc_bsg_jobdone and use it in FC drivers
Export fc_bsg_jobdone so drivers can use it directly instead of doing
the round-trip via struct fc_bsg_job::job_done() and use it in the
LLDDs.  That way we can also unify the interfaces of fc_bsg_jobdone and
bsg_job_done.

As we've converted all LLDDs over to use fc_bsg_jobdone() directly, we
can remove the function pointer from struct fc_bsg_job as well.

Signed-off-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Acked-by: Tyrel Datwyler <tyreld@linux.vnet.ibm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2016-11-17 20:15:25 -05:00
Johannes Thumshirn
01e0e15c8b scsi: don't use fc_bsg_job::request and fc_bsg_job::reply directly
Don't use fc_bsg_job::request and fc_bsg_job::reply directly, but use
helper variables bsg_request and bsg_reply. This will be helpful when
transitioning to bsg-lib.

Signed-off-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2016-11-17 20:15:24 -05:00
Johannes Thumshirn
eb34094820 scsi: Get rid of struct fc_bsg_buffer
struct fc_bsg_buffer is just a clone of struct bsg_buffer from bsg-lib,
so use this one instead.

Signed-off-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2016-11-17 20:15:24 -05:00
Masahiro Yamada
a837bad6f2 i2c: uniphier: rename jump label to follow coding style guideline
Documentation/CodingStyle recommends to use label names which say
what the goto does or why the goto exists.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2016-11-18 02:13:11 +01:00
Jarkko Nikula
973652db6f i2c: designware: Allow reduce bus speed by "clock-frequency" property
Allow more flexibility to bus speed selection. Now if there are I2C
slave connections defined in ACPI the speed of slowest device on the bus
will define the bus speed. However if also "clock-frequency" device
property is defined we should use the slowest of these two.

This is targeted to maker boards where developer may want to connect
slower I2C slave devices to the bus than defined in existing ACPI I2C
slave connections.

Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2016-11-18 02:08:03 +01:00
Tin Huynh
c3ae106050 i2c: designware: Implement support for SMBus block read and write
Free and Open IPMI use SMBUS BLOCK Read/Write to support SSIF protocol.
However, I2C Designware Core Driver doesn't handle the case at the moment.
The below patch supports this feature.

Signed-off-by: Tin Huynh <tnhuynh@apm.com>
Acked-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2016-11-18 02:06:41 +01:00
Julia Lawall
379883cc67 i2c: constify i2c_adapter_quirks structures
Check for i2c_adapter_quirks structures that are only stored in the
quirks field of an i2c_adapter structure.  This field is declared
const, so i2c_adapter_quirks structures that have this property can be
declared as const also.

Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Acked-by: Ray Jui <ray.jui@broadcom.com> # for bcm-iproc
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2016-11-18 02:05:03 +01:00
Lukas Wunner
68db9bc814 PCI: pciehp: Add runtime PM support for PCIe hotplug ports
Linux 4.8 added support for runtime suspending PCIe ports to D3hot with
commit 006d44e49a ("PCI: Add runtime PM support for PCIe ports"), but
excluded hotplug ports.  Those are now afforded runtime PM by the present
commit.

Hotplug ports require a few extra considerations:

- The configuration space of the port remains accessible in D3hot, so all
  the functions to read or modify the Slot Status and Slot Control
  registers need not be modified.  Even turning on slot power doesn't seem
  to require the port to be in D0, at least the PCIe spec doesn't say so
  and I confirmed that by testing with a Thunderbolt controller.

- However D0 is required to access devices on the secondary bus.  This
  happens in pciehp_check_link_status() and pciehp_configure_device() (both
  called from board_added()) and in pciehp_unconfigure_device() (called
  from remove_board()), so acquire a runtime PM ref for their invocation.

- The hotplug port stays active as long as it has active children.  If all
  hotplugged devices below the port runtime suspend, the port is allowed to
  runtime suspend as well.  Plug and unplug detection continues to work in
  D3hot.

- Hotplug interrupts are delivered in-band, so while the hotplug port
  itself is allowed to go to D3hot, its parent ports must stay in D0 for
  interrupts to come through.  Add a corresponding restriction to
  pci_dev_check_d3cold().

- Runtime PM may only be allowed if the hotplug port is handled natively by
  the OS.  On ACPI systems, the port may alternatively be handled by the
  firmware and things break if the OS puts the port into D3 behind the
  firmware's back:  E.g. Thunderbolt hotplug ports on non-Macs are handled
  by Intel's firmware in System Management Mode and the firmware is known
  to access devices on the port's secondary bus without checking first if
  the port is in D0: https://bugzilla.kernel.org/show_bug.cgi?id=53811

Signed-off-by: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
CC: Mika Westerberg <mika.westerberg@linux.intel.com>
2016-11-17 19:00:29 -06:00
Wei Yongjun
68d85d0e03 i2c: digicolor: use clk_disable_unprepare instead of clk_unprepare
since clk_prepare_enable() is used to get i2c->clk, we should
use clk_disable_unprepare() to release it for the error path.

Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Acked-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2016-11-18 01:48:01 +01:00
Lukas Wunner
437eb7bf7b ACPI / hotplug / PCI: Make device_is_managed_by_native_pciehp() public
We're about to add runtime PM of hotplug ports, but we need to restrict it
to ports that are handled natively by the OS:  If they're handled by the
firmware (which is the case for Thunderbolt on non-Macs), things would
break if the OS put the ports into D3hot behind the firmware's back.

To determine if a hotplug port is handled natively, one has to walk up from
the port to the root bridge and check the cached _OSC Control Field for the
value of the "PCI Express Native Hot Plug control" bit.  There's already a
function to do that, device_is_managed_by_native_pciehp(), but it's private
to drivers/pci/hotplug/acpiphp_glue.c and only compiled in if
CONFIG_HOTPLUG_PCI_ACPI is enabled.

Make it public and move it to drivers/pci/pci-acpi.c, so that it is
available in the more general CONFIG_ACPI case.

The function contains a check if the device in question is a hotplug port
and returns false if it's not.  The caller we're going to add doesn't need
this as it only calls the function if it actually *is* a hotplug port.
Move the check out of the function into the single existing caller.

Rename it to pciehp_is_native() and add some kerneldoc and polish.

No functional change intended.

Tested-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-11-17 18:47:58 -06:00
Lukas Wunner
6ef13824e0 ACPI / hotplug / PCI: Use cached copy of PCI_EXP_SLTCAP_HPC bit
We cache the PCI_EXP_SLTCAP_HPC bit in pci_dev->is_hotplug_bridge on device
probe, so there's no need to read it again when adding the ACPI hotplug
context.

Here's the call chain to prove that no ordering issue is introduced:

pci_scan_child_bus [drivers/pci/probe.c]
  pci_scan_slot
    pci_scan_single_device
      pci_scan_device
        pci_setup_device
          set_pcie_hotplug_bridge
            [is_hotplug_bridge bit is set here]
  pci_scan_bridge
    pci_add_new_bus
      pci_alloc_child_bus
        pcibios_add_bus  [arch/(x86|arm64|ia64)/...]
          acpi_pci_add_bus [drivers/pci/pci-acpi.c]
            acpiphp_enumerate_slots [drivers/pci/hotplug/acpiphp_glue.c]
              acpiphp_add_context
                device_is_managed_by_native_pciehp
                  [is_hotplug_bridge bit is queried here]

No functional change intended.

Tested-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-11-17 18:47:38 -06:00
Lukas Wunner
718a0609ae PCI: Unfold conditions to block runtime PM on PCIe ports
The conditions to block D3 on parent ports are currently condensed into a
single expression in pci_dev_check_d3cold().  Upcoming commits will add
further conditions for hotplug ports, making this expression fairly large
and impenetrable.  Unfold the conditions to maintain readability when they
are amended.

No functional change intended.

Signed-off-by: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
CC: Mika Westerberg <mika.westerberg@linux.intel.com>
CC: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-11-17 18:47:05 -06:00
Lukas Wunner
97a90aee5d PCI: Consolidate conditions to allow runtime PM on PCIe ports
The conditions to allow runtime PM on PCIe ports are currently spread
across two different files:  The condition relating to hotplug ports is
located in portdrv_pci.c whereas all other conditions are located in pci.c.

Consolidate all conditions in a single place in pci.c, thus making it
easier to follow the logic and amend conditions down the road.

Note that the condition relating to hotplug ports is inserted *before* the
condition relating to the "pcie_port_pm=force" command line option, so
runtime PM is not afforded to hotplug ports even if this option is given.
That's exactly how the code behaved up until now.  If this is not desired,
the ordering of the conditions can simply be reversed.

No functional change intended.

Tested-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-11-17 18:46:22 -06:00
Lukas Wunner
c6a6330706 PCI: Activate runtime PM on a PCIe port only if it can suspend
Currently pcie_portdrv_probe() activates runtime PM on a PCIe port even
if it will never actually suspend because the BIOS is too old or the
"pcie_port_pm=off" option was specified on the kernel command line.

A few CPU cycles can be saved by not activating runtime PM at all in these
cases, because rpm_idle() and rpm_suspend() will bail out right at the
beginning when calling rpm_check_suspend_allowed(), instead of carrying out
various locking and assignments, invoking rpm_callback(), getting back
-EBUSY and rolling everything back.

The conditions checked in pci_bridge_d3_possible() are all static, they
never change during uptime of the system, hence it's safe to call this to
determine if runtime PM should be activated.

No functional change intended.

Tested-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-11-17 18:46:06 -06:00
Lukas Wunner
e8559b7100 PCI: Speed up algorithm in pci_bridge_d3_update()
After a device has been added, removed or had its D3cold attributes
changed, we recheck whether its parent bridge may runtime suspend to D3hot
with pci_bridge_d3_update().

The most naive algorithm would be to iterate over the bridge's children and
check if any of them are blocking D3.

The function already tries to be a bit smarter than that by first checking
the device that was changed.  If this device already blocks D3 on the
bridge, then walking over all the other children can be skipped.  A
drawback of this approach is that if the device is *not* blocking D3, it
will be checked a second time by pci_walk_bus().  But that's cheap and is
outweighed by the performance gain of potentially skipping pci_walk_bus()
altogether.

The algorithm can be optimized further by taking into account if D3 is
currently allowed for the bridge, as shown in the following truth table:

(a)  remove &&  bridge_d3:  D3 is currently allowed for the bridge and
                            removing one of its children won't change
                            that.  No action necessary.
(b)  remove && !bridge_d3:  D3 may now be allowed for the bridge if the
                            removed child was the only one blocking it.
                            Check all its siblings to verify that.
(c) !remove &&  bridge_d3:  D3 may now be disallowed but this can only
                            be caused by the added/changed child, not
                            any of its siblings.  Check only that single
                            device.
(d) !remove && !bridge_d3:  D3 may now be allowed for the bridge if the
                            changed child was the only one blocking it.
                            Check all its siblings to verify that.
                            By checking beforehand if the changed child
                            is blocking D3, we may be able to skip
                            checking its siblings.

Currently we do not special-case option (a) and in case of option (c) we
gratuitously call pci_walk_bus().  Speed up the algorithm by adding these
optimizations.  Reword the comments a bit in an attempt to improve clarity.

No functional change intended.

Tested-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-11-17 18:45:35 -06:00
Lukas Wunner
1ed276a7b9 PCI: Autosense device removal in pci_bridge_d3_update()
The algorithm to update the flag indicating whether a bridge may go to D3
makes a few optimizations based on whether the update was caused by the
removal of a device on the one hand, versus the addition of a device or the
change of its D3cold flags on the other hand.

The information whether the update pertains to a removal is currently
passed in by the caller, but the function may as well determine that itself
by examining the device in question, thereby allowing for a considerable
simplification and reduction of the code.

Out of several options to determine removal, I've chosen the function
device_is_registered() because it's cheap:  It merely returns the
dev->kobj.state_in_sysfs flag.  That flag is set through device_add() when
the root bus is scanned and cleared through device_remove().  The call to
pci_bridge_d3_update() happens after each of these calls, respectively, so
the ordering is correct.

No functional change intended.

Tested-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-11-17 18:44:56 -06:00
Paul Gortmaker
ff3a98be79 i2c: i2c-pxa-pci; make explicitly non-modular
The Kconfig currently controlling compilation of this code is:

drivers/i2c/busses/Kconfig:config I2C_PXA_PCI
drivers/i2c/busses/Kconfig:     def_bool I2C_PXA && X86_32 && PCI && OF

...meaning that it currently is not being built as a module by anyone.

Lets remove the modular code that is essentially orphaned, so that
when reading the driver there is no doubt it is builtin-only.

We explicitly disallow a driver unbind, since that doesn't have a
sensible use case anyway, and it allows us to drop the ".remove"
code for non-modular drivers.

Since module_pci_driver() uses the same init level priority as
builtin_pci_driver() the init ordering remains unchanged with
this commit.

Also note that MODULE_DEVICE_TABLE is a no-op for non-modular code.

We also delete the MODULE_LICENSE tag etc. since all that information
was (or is now) contained at the top of the file in the comments.

Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Acked-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2016-11-18 01:44:38 +01:00
Lukas Wunner
738a7edbfc PCI: Don't acquire ref on parent in pci_bridge_d3_update()
This function is always called with an existing pci_dev struct, which
holds a reference on the pci_bus struct it resides on, which in turn
holds a reference on pci_bus->bridge, which is the pci_dev's parent.

Hence there's no need to acquire an additional ref on the parent.

More specifically, the pci_dev exists until pci_destroy_dev() drops the
final reference on it, so all calls to pci_bridge_d3_update() must be
finished before that.  It is arguably the caller's responsibility to ensure
that it doesn't call pci_bridge_d3_update() with a pci_dev that might
suddenly disappear, but in any case the existing callers are all safe:

- The call in pci_destroy_dev() happens before the call to put_device().
- The call in pci_bus_add_device() is synchronized with pci_destroy_dev()
  using pci_lock_rescan_remove().
- The calls to pci_d3cold_disable() from the xhci and nouveau drivers
  are safe because a ref on the pci_dev is held as long as it's bound to
  a driver.
- The calls to pci_d3cold_enable() / pci_d3cold_disable() when modifying
  the sysfs "d3cold_allowed" entry are also safe because kernfs_drain()
  waits for existing sysfs users to finish before removing the entry,
  and pci_destroy_dev() is called way after that.

No functional change intended.

Tested-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-11-17 18:43:49 -06:00