The ethtool api {get|set}_settings is deprecated.
We move this driver to new api {get|set}_link_ksettings.
As I don't have the hardware, I'd be very pleased if
someone may test this patch.
Signed-off-by: Philippe Reynes <tremyfr@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Dmitry Torokhov says:
====================
PTP attribute handling cleanup
PTP core was creating some attributes, such as "period" and "fifo", and the
entire "pins" attribute group, after creating class deevice, which creates
a race for userspace: uevent may arrive before all attributes are created.
This series of patches switches PTP to use is_visible() to control
visibility of attributes in a group, and device_create_with_groups() to
ensure that attributes are created before we notify userspace of a new
device.
v2:
- added Richard's acked-by to patch #1
- removed use of kmalloc_array in favor of kcalloc in patch #2 at
Richard's request
- added a cover letter
v1:
- initial patch set
====================
Acked-by: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Let's switch to using device_create_with_groups(), which will allow us to
create "pins" attribute group together with the rest of ptp device
attributes, and before userspace gets notified about ptp device creation.
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Instead of creating selected attributes after the device is created (and
after userspace potentially seen uevent), lets use attribute group
is_visible() method to control which attributes are shown. This will allow
us to create all attributes (except "pins" group, which will be taken care
of later) before userspace gets notified about new ptp class device.
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
kcalloc is more semantically correct when allocating arrays of objects, and
overflow-safe.
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
We do not need explicitly call dev_set_drvdata(), as it is done for us by
device_create().
Acked-by: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
There are 2 problems wrt. cpu_topology_map on systems with sparse CPUs:
1. offline/absent CPUs will have their socket_id and core_id set to -1
which triggers:
"socket_id number is too big.You may need to upgrade the perf tool."
2. size of cpu_topology_map (perf_env.cpu[]) is allocated based on
_SC_NPROCESSORS_CONF, but can be indexed with CPU ids going above.
Users of perf_env.cpu[] are using CPU id as index. This can lead
to read beyond what was allocated:
==19991== Invalid read of size 4
==19991== at 0x490CEB: check_cpu_topology (topology.c:69)
==19991== by 0x490CEB: test_session_topology (topology.c:106)
...
For example:
_SC_NPROCESSORS_CONF == 16
available: 2 nodes (0-1)
node 0 cpus: 0 6 8 10 16 22 24 26
node 0 size: 12004 MB
node 0 free: 9470 MB
node 1 cpus: 1 7 9 11 23 25 27
node 1 size: 12093 MB
node 1 free: 9406 MB
node distances:
node 0 1
0: 10 20
1: 20 10
This patch changes HEADER_NRCPUS.nr_cpus_available from _SC_NPROCESSORS_CONF
to max_present_cpu and updates any user of cpu_topology_map to iterate
with nr_cpus_avail.
As a consequence HEADER_CPU_TOPOLOGY core_id and socket_id lists get longer,
but maintain compatibility with pre-patch state - index to cpu_topology_map is
CPU id.
perf test 36 -v
36: Session topology :
--- start ---
test child forked, pid 22211
templ file: /tmp/perf-test-gmdX5i
CPU 0, core 0, socket 0
CPU 1, core 0, socket 1
CPU 6, core 10, socket 0
CPU 7, core 10, socket 1
CPU 8, core 1, socket 0
CPU 9, core 1, socket 1
CPU 10, core 9, socket 0
CPU 11, core 9, socket 1
CPU 16, core 0, socket 0
CPU 22, core 10, socket 0
CPU 23, core 10, socket 1
CPU 24, core 1, socket 0
CPU 25, core 1, socket 1
CPU 26, core 9, socket 0
CPU 27, core 9, socket 1
test child finished with 0
---- end ----
Session topology: Ok
Signed-off-by: Jan Stancek <jstancek@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/d7c05c6445fca74a8442c2c73cfffd349c52c44f.1487146877.git.jstancek@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
All rx and rx netdev interrupts are handled by respectively
by mlx4_en_rx_irq() and mlx4_en_tx_irq() which simply schedule a NAPI.
But mlx4_eq_int() also fires a tasklet to service all items that were
queued via mlx4_add_cq_to_tasklet(), but this handler was not called
unless user cqe was handled.
This is very confusing, as "mpstat -I SCPU ..." show huge number of
tasklet invocations.
This patch saves this overhead, by carefully firing the tasklet directly
from mlx4_add_cq_to_tasklet(), removing four atomic operations per IRQ.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Tariq Toukan <tariqt@mellanox.com>
Cc: Saeed Mahameed <saeedm@mellanox.com>
Acked-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When build_cpu_topo() encounters offline/absent CPUs, it fails to find any
sysfs entries and returns failure.
This leads to build_cpu_topology() and write_cpu_topology() failing as
well.
Because HEADER_CPU_TOPOLOGY has not been written, read leaves cpu_topology_map
NULL and we get NULL ptr deref at:
...
cmd_test
__cmd_test
test_and_print
run_test
test_session_topology
check_cpu_topology
36: Session topology :
--- start ---
test child forked, pid 14902
templ file: /tmp/perf-test-4CKocW
failed to write feature HEADER_CPU_TOPOLOGY
perf: Segmentation fault
Obtained 9 stack frames.
./perf(sighandler_dump_stack+0x41) [0x5095f1]
/lib64/libc.so.6(+0x35250) [0x7f4b7c3c9250]
./perf(test_session_topology+0x1db) [0x490ceb]
./perf() [0x475b68]
./perf(cmd_test+0x5b9) [0x4763c9]
./perf() [0x4945a3]
./perf(main+0x69f) [0x427e8f]
/lib64/libc.so.6(__libc_start_main+0xf5) [0x7f4b7c3b5b35]
./perf() [0x427fb9]
test child interrupted
---- end ----
Session topology: FAILED!
This patch makes build_cpu_topology() skip offline/absent CPUs, by checking
their presence against cpu_map built from online CPUs.
Signed-off-by: Jan Stancek <jstancek@redhat.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/a271b770175524f4961d4903af33798358a4a518.1487146877.git.jstancek@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Similar to cpu__max_cpu() (which returns the max possible CPU), returns
the max present CPU.
Signed-off-by: Jan Stancek <jstancek@redhat.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/8ea4601b5cacc49927235b4ebac424bd6eeccb06.1487146877.git.jstancek@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The struct branch_stack->branch_stack.cycles field is a u64 :16
bitfield, and this somehow confuses clang 4.0 when checking the
arguments of a printf format, so cast the :16 to unsigned short to help
it.
Silences this:
util/session.c:935:4: error: format specifies type 'unsigned short' but the argument has type 'u64' (aka 'unsigned long') [-Werror,-Wformat]
e->flags.cycles,
^~~~~~~~~~~~~~~
1 error generated.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-eo2t4uhlbne105z72tvyzkp1@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The comment about ring buffer's organization is outdated and the code sits
elsewhere, remove the comment.
Link: http://lkml.kernel.org/r/20170217041058.23904-1-joelaf@google.com
Cc: Ingo Molnar <mingo@redhat.com>
Signed-off-by: Joel Fernandes <joelaf@google.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Fix the typo of the function name pevent_data_prempt_count()
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Fixes: c52d9e4e67 ("tools lib traceevent: Add retrieval of preempt count and latency flags")
Link: http://lkml.kernel.org/r/20170216201352.469c99de@grimm.local.home
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The -spec=/path/to/file can be used to change what gcc puts in the cc,
ld, etc command lines, but this is not present in clang, filter it out
at the setup.py file by changing python2's internal variable where it
keeps its initial CFLAGS value.
With this all of perf can be built in at least Fedora 25, fixing this
problem:
GEN /tmp/build/perf/python/perf.so
CC /tmp/build/perf/builtin-buildid-list.o
clang-4.0: error: argument unused during compilation: '-specs=/usr/lib/rpm/redhat/redhat-hardened-cc1' [-Werror,-Wunused-command-line-argument]
clang-4.0: error: argument unused during compilation: '-specs=/usr/lib/rpm/redhat/redhat-hardened-cc1' [-Werror,-Wunused-command-line-argument]
error: command 'clang' failed with exit status 1
Now I need to change all the containers where I have clang to build
perf with it, so that we can check that in other distros (opensuse, debian,
ubuntu, etc) this also works.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-g9lhgr162ao8ao29vvf0hgm1@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Gcc has a -spec option to override what options to pass to cc, etc, and
in some distros this is used, like in fedora, where we end up getting
this passed to gcc that makes clang, that doesn't have this option to
stop the build:
CC /tmp/build/perf/util/scripting-engines/trace-event-python.o
clang-4.0: error: argument unused during compilation: '-specs=/usr/lib/rpm/redhat/redhat-hardened-cc1' [-Werror,-Wunused-command-line-argument]
So filter this out when the compiler used is clang, this way we
can build the python scripting support in tools/perf/.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-2gosxoiouf24pnlknp7w7q4z@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Not every toolchain has -fno-asynchronous-unwind-tables per default on
MIPS. This patch specifies the necessary option explicitly for VDSO
library build.
This prevents the following build failure:
GENVDSO arch/mips/vdso/vdso-image.c
arch/mips/vdso/genvdso: 'arch/mips/vdso/vdso.so.dbg' contains relocation sections
.../arch/mips/vdso/Makefile:84: recipe for target 'arch/mips/vdso/vdso-image.c' failed
Signed-off-by: Robert Schiele <rschiele@gmail.com>
Signed-off-by: Alexander Sverdlin <alexander.sverdlin@nokia.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: "Maciej W. Rozycki" <macro@imgtec.com>
Cc: Alexander Sverdlin <alexander.sverdlin@nokia.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/15127/
Signed-off-by: James Hogan <james.hogan@imgtec.com>
* Return an error code without storing it in an intermediate variable.
* Delete the local variable "r" and the jump label "out" which became
unnecessary with this refactoring.
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
* Return an error code without storing it in an intermediate variable.
* Delete the local variable "r" and the jump label "out" which became
unnecessary with this refactoring.
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
* Return directly after a call of the function "copy_from_user" failed
in a case block.
This issue was detected by using the Coccinelle software.
* Delete the jump label "out" which became unnecessary with
this refactoring.
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The FPU is always active now when running KVM.
Reviewed-by: David Matlack <dmatlack@google.com>
Reviewed-by: Bandan Das <bsd@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The purpose of the KVM_SET_SIGNAL_MASK API is to let userspace "kick"
a VCPU out of KVM_RUN through a POSIX signal. A signal is attached
to a dummy signal handler; by blocking the signal outside KVM_RUN and
unblocking it inside, this possible race is closed:
VCPU thread service thread
--------------------------------------------------------------
check flag
set flag
raise signal
(signal handler does nothing)
KVM_RUN
However, one issue with KVM_SET_SIGNAL_MASK is that it has to take
tsk->sighand->siglock on every KVM_RUN. This lock is often on a
remote NUMA node, because it is on the node of a thread's creator.
Taking this lock can be very expensive if there are many userspace
exits (as is the case for SMP Windows VMs without Hyper-V reference
time counter).
As an alternative, we can put the flag directly in kvm_run so that
KVM can see it:
VCPU thread service thread
--------------------------------------------------------------
raise signal
signal handler
set run->immediate_exit
KVM_RUN
check run->immediate_exit
Reviewed-by: Radim Krčmář <rkrcmar@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
call spi_master_put() in case of failures after spi_alloc_master().
call pm_runtime_disable() in case of failures after pm_runtime_enable().
Signed-off-by: Prahlad V <prahlad.eee@gmail.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
After the pcm jack is created, create and initialize the pin switch
widget for each port. Pin switch is to enable/disable the pin when
monitor is connected/disconnected.
Signed-off-by: Jeeja KP <jeeja.kp@intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
The local variable @iov isn't used, to remove it.
Signed-off-by: Gavin Shan <gwshan@linux.vnet.ibm.com>
Reviewed-by: Andrew Donnellan <andrew.donnellan@au1.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
The CAPI driver creates virtual PHB (vPHB) from the CAPI adapter.
The vPHB's IO and memory windows aren't built from device-tree node
as we do for normal PHBs. A error message is thrown in below path
when trying to probe AFUs contained in the adapter. The error message
is confusing and unnecessary.
cxl_probe()
pci_init_afu()
cxl_pci_vphb_add()
pcibios_scan_phb()
pcibios_setup_phb_resources()
This removes the error message. We might have the case where the
first memory window on real PHB isn't populated properly because
of error in "ranges" property in the device-tree node. We can check
the device-tree instead for that. This also removes one unnecessary
blank line in the function.
Signed-off-by: Gavin Shan <gwshan@linux.vnet.ibm.com>
Reviewed-by: Andrew Donnellan <andrew.donnellan@au1.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
The Asus WL-500W buttons are active high, but the software treats them
as active low. Fix the inverted logic.
Fixes: 3be972556f ("MIPS: BCM47XX: Import buttons database from OpenWrt")
Signed-off-by: Mirko Parthey <mirko.parthey@web.de>
Acked-by: Rafał Miłecki <rafal@milecki.pl>
Cc: Hauke Mehrtens <hauke@hauke-m.de>
Cc: linux-mips@linux-mips.org
Cc: <stable@vger.kernel.org> # 3.14.x-
Patchwork: https://patchwork.linux-mips.org/patch/15295/
Signed-off-by: James Hogan <james.hogan@imgtec.com>
An img directory exists for the Pistchio SoC device tree but the
directory itself isn't in the dts Makefile meaning the dtbs never get
built.
Fixes: daa10170da ("MIPS: DTS: img: add device tree for Marduk board")
Signed-off-by: Ian Pozella <Ian.Pozella@imgtec.com>
Reviewed-by: Rahul Bedarkar <Rahul.Bedarkar@imgtec.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/15309/
Signed-off-by: James Hogan <james.hogan@imgtec.com>
This fixes the typo about the _PAGE_PTE in set_pte_at() by changing
"tryint" to "trying to".
Signed-off-by: Gavin Shan <gwshan@linux.vnet.ibm.com>
Acked-by: Balbir Singh <bsingharora@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
One of the last remaining failures in kernelci.org is for a gcc bug:
drivers/net/ethernet/qlogic/qlge/qlge_main.c:4819:1: error: insn does not satisfy its constraints:
drivers/net/ethernet/qlogic/qlge/qlge_main.c:4819:1: internal compiler error: in extract_constrain_insn, at recog.c:2190
This is apparently broken in gcc-6 but fixed in gcc-7, and I cannot
reproduce the problem here. However, it is clear that ip27_defconfig
does not actually need this driver as the platform has only PCI-X but
not PCIe, and the qlge adapter in turn is PCIe-only.
The driver was originally enabled in 2010 along with lots of other
drivers.
Fixes: 59d302b342 ("MIPS: IP27: Make defconfig useful again.")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/15197/
Signed-off-by: James Hogan <james.hogan@imgtec.com>
Early clock API pic32_get_pbclk() is defined in early_clk.c and used by
time.c and early_console.c. When CONFIG_EARLY_PRINTK isn't set,
early_clk.c isn't compiled and time.c fails to link.
Fix it by compiling early_clk.c always. Also sort files in alphabetical
order.
Fixes: 6e4ad1b413 ("MIPS: pic32mzda: fix getting timer clock rate.")
Reported-by: Harvey Hunt <harvey.hunt@imgtec.com>
Signed-off-by: Purna Chandra Mandal <purna.mandal@microchip.com>
Reviewed-by: Harvey Hunt <harvey.hunt@imgtec.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Joshua Henderson <digitalpeer@digitalpeer.com>
Cc: linux-mips@linux-mips.org
Cc: <stable@vger.kernel.org> # 4.7.x-
Patchwork: https://patchwork.linux-mips.org/patch/13383/
Signed-off-by: James Hogan <james.hogan@imgtec.com>
Disabling ethernet during reboot (only to enable it again when the
ethernet driver attaches) can put the chip into a faulty state where it
corrupts the header of all incoming packets.
This happens if packets arrive during the time window where the core is
disabled, and it can be easily reproduced by rebooting while sending a
flood ping to the broadcast address.
Fixes: 95135bfa7e ("MIPS: Lantiq: Deactivate most of the devices by default")
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Acked-by: John Crispin <john@phrozen.org>
Cc: hauke.mehrtens@lantiq.com
Cc: linux-mips@linux-mips.org
Cc: <stable@vger.kernel.org> # 4.4.x-
Patchwork: https://patchwork.linux-mips.org/patch/15078/
Signed-off-by: James Hogan <james.hogan@imgtec.com>
If copy_from_user is called with a large buffer (>= 128 bytes) and the
userspace buffer refers partially to unreadable memory, then it is
possible for Octeon's copy_from_user to report the wrong number of bytes
have been copied. In the case where the buffer size is an exact multiple
of 128 and the fault occurs in the last 64 bytes, copy_from_user will
report that all the bytes were copied successfully but leave some
garbage in the destination buffer.
The bug is in the main __copy_user_common loop in octeon-memcpy.S where
in the middle of the loop, src and dst are incremented by 128 bytes. The
l_exc_copy fault handler is used after this but that assumes that
"src < THREAD_BUADDR($28)". This is not the case if src has already been
incremented.
Fix by adding an extra fault handler which rewinds the src and dst
pointers 128 bytes before falling though to l_exc_copy.
Thanks to the pwritev test from the strace test suite for originally
highlighting this bug!
Fixes: 5b3b16880f ("MIPS: Add Cavium OCTEON processor support ...")
Signed-off-by: James Cowgill <James.Cowgill@imgtec.com>
Acked-by: David Daney <david.daney@cavium.com>
Reviewed-by: James Hogan <james.hogan@imgtec.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: linux-mips@linux-mips.org
Cc: stable@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/14978/
Signed-off-by: James Hogan <james.hogan@imgtec.com>
For certain arguments such as saddr = 0xc0a8fd60, daddr = 0xc0a8fda1,
len = 80, proto = 17, sum = 0x7eae049d there will be a carry when
folding the intermediate 64 bit checksum to 32 bit but the code doesn't
add the carry back to the one's complement sum, thus an incorrect result
will be generated.
Reported-by: Mark Zhang <bomb.zhang@gmail.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Reviewed-by: James Hogan <james.hogan@imgtec.com>
Cc: stable@vger.kernel.org
Signed-off-by: James Hogan <james.hogan@imgtec.com>
pnv_php_disable_irq() can be called in two paths: Bailing path in
pnv_php_enable_irq() or releasing slot. The MSI (or MSIx) interrupts
is disabled unconditionally in pnv_php_disable_irq(). It's wrong
because that might be enabled by drivers other than pnv-php.
This disables MSI (or MSIx) interrupts and the PCI device only if
it was enabled by pnv-php. In the error path of pnv_php_enable_irq(),
we rely on the newly added parameter @disable_device. In the path
of releasing slot, @pnv_php->irq is checked.
Cc: <stable@vger.kernel.org> # v4.9+
Fixes: 360aebd85a ("drivers/pci/hotplug: Support surprise hotplug in powernv driver")
Signed-off-by: Gavin Shan <gwshan@linux.vnet.ibm.com>
Reviewed-by: Andrew Donnellan <andrew.donnellan@au1.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
The root port or PCIe switch downstream port might have been associated
with driver other than pnv-php. The MSI or MSIx might also have been
enabled by that driver (e.g. pcieport_drv). Attempt to enable MSI incurs
below backtrace:
PowerPC PowerNV PCI Hotplug Driver version: 0.1
------------[ cut here ]------------
WARNING: CPU: 19 PID: 1004 at drivers/pci/msi.c:1071 \
__pci_enable_msi_range+0x84/0x4e0
NIP [c000000000665c34] __pci_enable_msi_range+0x84/0x4e0
LR [c000000000665c24] __pci_enable_msi_range+0x74/0x4e0
Call Trace:
[c000000384d67600] [c000000000665c24] __pci_enable_msi_range+0x74/0x4e0
[c000000384d676e0] [d00000000aa31b04] pnv_php_register+0x564/0x5a0 [pnv_php]
[c000000384d677c0] [d00000000aa31658] pnv_php_register+0xb8/0x5a0 [pnv_php]
[c000000384d678a0] [d00000000aa31658] pnv_php_register+0xb8/0x5a0 [pnv_php]
[c000000384d67980] [d00000000aa31dfc] pnv_php_init+0x60/0x98 [pnv_php]
[c000000384d679f0] [c00000000000cfdc] do_one_initcall+0x6c/0x1d0
[c000000384d67ab0] [c000000000b92354] do_init_module+0x94/0x254
[c000000384d67b40] [c00000000019719c] load_module+0x258c/0x2c60
[c000000384d67d30] [c000000000197bb0] SyS_finit_module+0xf0/0x170
[c000000384d67e30] [c00000000000b184] system_call+0x38/0xe0
This fixes the issue by skipping enabling the surprise hotplug
capability if the MSI or MSIx on the PCI slot's upstream port has
been enabled by other driver.
Cc: <stable@vger.kernel.org> # v4.9+
Fixes: 360aebd85a ("drivers/pci/hotplug: Support surprise hotplug in powernv driver")
Signed-off-by: Gavin Shan <gwshan@linux.vnet.ibm.com>
Reviewed-by: Andrew Donnellan <andrew.donnellan@au1.ibm.com>
Tested-by: Vaibhav Jain <vaibhav@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
The average user likely does not know what a "htab" or "LPID" is,
and it's annoying that these messages are quickly filling the dmesg
log when you're doing boot cycle tests, so let's turn it into a debug
message instead.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
Commit e5d6b12fe1 (Btrfs: don't WARN() in btrfs_transaction_abort() for
IO errors) added a pr_debug call to be printed when a transaction is
aborted with -EIO instead of WARN. btrfs_debug prints which file system
the message is associated with so let's use that instead.
Signed-off-by: Jeff Mahoney <jeffm@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
btrfs_truncate_free_space_cache always allocates a btrfs_path structure
but only uses it when the caller passes a block group. Let's move the
allocation and free into the conditional.
Signed-off-by: Jeff Mahoney <jeffm@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The free space cache APIs accept a root but always use the tree root.
Also, btrfs_truncate_free_space_cache accepts a root AND an inode but
the inode always points to the root anyway, so let's just pass the inode.
Signed-off-by: Jeff Mahoney <jeffm@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
btrfs_inc_block_group_ro is either passed the extent root or the dev
root, but it doesn't do anything with the dev tree. Let's convert
to passing an fs_info and using the extent root.
Signed-off-by: Jeff Mahoney <jeffm@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
We don't need to pass a root to flush_space since it always uses
the fs_root.
Signed-off-by: Jeff Mahoney <jeffm@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Outside of interactions with qgroups, the roots passed in extent-tree.c
are usually passed to ensure that we don't do refcounts on log trees or
to get the allocation profile for an allocation request. Otherwise, it
operates on the extent root. This patch converts some more routines in
extent-tree.c that are always called with the extent root to accept
an fs_info instead.
Signed-off-by: Jeff Mahoney <jeffm@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Just as Filipe pointed out, the most time consuming parts of qgroup are
btrfs_qgroup_account_extents() and
btrfs_qgroup_prepare_account_extents().
Which both call btrfs_find_all_roots() to get old_roots and new_roots
ulist.
What makes things worse is, we're calling that expensive
btrfs_find_all_roots() at transaction committing time with
TRANS_STATE_COMMIT_DOING, which will blocks all incoming transaction.
Such behavior is necessary for @new_roots search as current
btrfs_find_all_roots() can't do it correctly so we do call it just
before switch commit roots.
However for @old_roots search, it's not necessary as such search is
based on commit_root, so it will always be correct and we can move it
out of transaction committing.
This patch moves the @old_roots search part out of
commit_transaction(), so in theory we can half the time qgroup time
consumption at commit_transaction().
But please note that, this won't speedup qgroup overall, the total time
consumption is still the same, just reduce the performance stall.
Cc: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Qu Wenruo <quwenruo@cn.fujitsu.com>
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Both unused after the call to update_cache_item has been moved to
__btrfs_wait_cache_io.
Reviewed-by: Liu Bo <bo.li.liu@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Unused since the helper has been split, eb used in the caller.
Reviewed-by: Liu Bo <bo.li.liu@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
