Commit graph

661,541 commits

Author SHA1 Message Date
Benjamin Beichler
4fb7f8af1f mac80211_hwsim: fix beacon delta calculation
Due to the cast from uint32_t to int64_t, a wrong next beacon timing is
calculated and effectively the beacon timer stops working. This is
especially bad for 802.11s mesh networks, because discovery breaks
without beacons.

Signed-off-by: Benjamin Beichler <benjamin.beichler@uni-rostock.de>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2016-11-15 14:39:56 +01:00
Felix Fietkau
a786f96da0 mac80211: fix A-MSDU aggregation with fast-xmit + txq
A-MSDU aggregation alters the QoS header after a frame has been
enqueued, so it needs to be ready before enqueue and not overwritten
again afterwards

Fixes: bb42f2d13f ("mac80211: Move reorder-sensitive TX handlers to after TXQ dequeue")
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Acked-by: Toke Høiland-Jørgensen <toke@toke.dk>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2016-11-15 14:37:30 +01:00
Felix Fietkau
fff712cbe3 mac80211: remove bogus skb vif assignment
The call to ieee80211_txq_enqueue overwrites the vif pointer with the
codel enqueue time, so setting it just before that call makes no sense.

Signed-off-by: Felix Fietkau <nbd@nbd.name>
Acked-by: Toke Høiland-Jørgensen <toke@toke.dk>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2016-11-15 14:37:21 +01:00
Felix Fietkau
c1f4c9ede3 mac80211: update A-MPDU flag on tx dequeue
The sequence number counter is used to derive the starting sequence
number. Since that counter is updated on tx dequeue, the A-MPDU flag
needs to be up to date at the tme of dequeue as well.

This patch prevents sending more A-MPDU frames after the session has
been terminated and also ensures that aggregation starts right after the
session has been established

Fixes: bb42f2d13f ("mac80211: Move reorder-sensitive TX handlers to after TXQ dequeue")
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Acked-by: Toke Høiland-Jørgensen <toke@toke.dk>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2016-11-15 14:37:12 +01:00
Pedersen, Thomas
8fdd136f22 cfg80211: add bitrate for 20MHz MCS 9
Some drivers (ath10k) report MCS 9 @ 20MHz, which
technically isn't defined. To get more meaningful value
than 0 out of this however, just extrapolate a bitrate
from ratio of MCS 7 and 9 in channels where it is allowed.

Signed-off-by: Thomas Pedersen <twp@qca.qualcomm.com>
[add a comment about it in the code]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2016-11-15 14:34:00 +01:00
Felix Fietkau
6c18a6b4e7 Revert "mac80211: allow using AP_LINK_PS with mac80211-generated TIM IE"
This reverts commit c68df2e7be.

__sta_info_recalc_tim turns into a no-op if local->ops->set_tim is not
set. This prevents the beacon TIM bit from being set for all drivers
that do not implement this op (almost all of them), thus thoroughly
essential AP mode powersave functionality.

Cc: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Fixes: c68df2e7be ("mac80211: allow using AP_LINK_PS with mac80211-generated TIM IE")
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2016-11-15 14:32:09 +01:00
Jiri Kosina
9c5dcd7231 HID: udraw-ps3: accel_limits is local to the driver
And as such should be marked static to avoid global namespace pollution.

Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2016-11-15 14:23:17 +01:00
Bastien Nocera
0edffe655a HID: udraw-ps3: Add support for the uDraw tablet for PS3
This adds support for the THQ uDraw tablet for the PS3, as
4 separate device nodes, so that user-space can easily consume
events coming from the hardware.

Note that the touchpad two-finger support is fairly unreliable,
and a right-click can only be achieved with a two-finger tap
with the two fingers slightly apart (about 1cm should be enough).

Tested-by: Bastien Nocera <hadess@hadess.net>
Signed-off-by: Bastien Nocera <hadess@hadess.net>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2016-11-15 14:20:05 +01:00
Peter Zijlstra
0f5225b024 locking/mutex, drm: Introduce mutex_trylock_recursive()
By popular DRM demand, introduce mutex_trylock_recursive() to fix up the
two GEM users.

Without this it is very easy for these drivers to get stuck in
low-memory situations and trigger OOM. Work is in progress to remove the
need for this in at least i915.

Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: David Airlie <airlied@linux.ie>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Ding Tianhong <dingtianhong@huawei.com>
Cc: Imre Deak <imre.deak@intel.com>
Cc: Jason Low <jason.low2@hpe.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Paul E. McKenney <paulmck@us.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rob Clark <robdclark@gmail.com>
Cc: Terry Rudd <terry.rudd@hpe.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tim Chen <tim.c.chen@linux.intel.com>
Cc: Will Deacon <Will.Deacon@arm.com>
Cc: dri-devel@lists.freedesktop.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-11-15 14:19:55 +01:00
Filip Matusiak
c8eaf3479e mac80211: Ignore VHT IE from peer with wrong rx_mcs_map
This is a workaround for VHT-enabled STAs which break the spec
and have the VHT-MCS Rx map filled in with value 3 for all eight
spacial streams, an example is AR9462 in AP mode.

As per spec, in section 22.1.1 Introduction to the VHT PHY
A VHT STA shall support at least single spactial stream VHT-MCSs
0 to 7 (transmit and receive) in all supported channel widths.

Some devices in STA mode will get firmware assert when trying to
associate, examples are QCA9377 & QCA6174.

Packet example of broken VHT Cap IE of AR9462:

Tag: VHT Capabilities (IEEE Std 802.11ac/D3.1)
    Tag Number: VHT Capabilities (IEEE Std 802.11ac/D3.1) (191)
    Tag length: 12
    VHT Capabilities Info: 0x00000000
    VHT Supported MCS Set
        Rx MCS Map: 0xffff
            .... .... .... ..11 = Rx 1 SS: Not Supported (0x0003)
            .... .... .... 11.. = Rx 2 SS: Not Supported (0x0003)
            .... .... ..11 .... = Rx 3 SS: Not Supported (0x0003)
            .... .... 11.. .... = Rx 4 SS: Not Supported (0x0003)
            .... ..11 .... .... = Rx 5 SS: Not Supported (0x0003)
            .... 11.. .... .... = Rx 6 SS: Not Supported (0x0003)
            ..11 .... .... .... = Rx 7 SS: Not Supported (0x0003)
            11.. .... .... .... = Rx 8 SS: Not Supported (0x0003)
        ...0 0000 0000 0000 = Rx Highest Long GI Data Rate (in Mb/s, 0 = subfield not in use): 0x0000
        Tx MCS Map: 0xffff
        ...0 0000 0000 0000 = Tx Highest Long GI Data Rate  (in Mb/s, 0 = subfield not in use): 0x0000

Signed-off-by: Filip Matusiak <filip.matusiak@tieto.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2016-11-15 14:18:43 +01:00
David Carrillo-Cisneros
864c2357ca perf/core: Do not set cpuctx->cgrp for unscheduled cgroups
Commit:

  db4a835601 ("perf/core: Set cgroup in CPU contexts for new cgroup events")

failed to verify that event->cgrp is actually the scheduled cgroup
in a CPU before setting cpuctx->cgrp. This patch fixes that.

Now that there is a different path for scheduled and unscheduled
cgroup, add a warning to catch when cpuctx->cgrp is still set after
the last cgroup event has been unsheduled.

To verify the bug:

  # Create 2 cgroups.
  mkdir /dev/cgroups/devices/g1
  mkdir /dev/cgroups/devices/g2

  # launch a task, bind it to a cpu and move it to g1
  CPU=2
  while :; do : ; done &
  P=$!

  taskset -pc $CPU $P
  echo $P > /dev/cgroups/devices/g1/tasks

  # monitor g2 (it runs no tasks) and observe output
  perf stat -e cycles -I 1000 -C $CPU -G g2

  #           time             counts unit events
     1.000091408          7,579,527      cycles                    g2
     2.000350111      <not counted>      cycles                    g2
     3.000589181      <not counted>      cycles                    g2
     4.000771428      <not counted>      cycles                    g2

  # note first line that displays that a task run in g2, despite
  # g2 having no tasks. This is because cpuctx->cgrp was wrongly
  # set when context of new event was installed.
  # After applying the fix we obtain the right output:

  perf stat -e cycles -I 1000 -C $CPU -G g2
  #           time             counts unit events
     1.000119615      <not counted>      cycles                    g2
     2.000389430      <not counted>      cycles                    g2
     3.000590962      <not counted>      cycles                    g2

Signed-off-by: David Carrillo-Cisneros <davidcc@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Nilay Vaish <nilayvaish@gmail.com>
Cc: Paul Turner <pjt@google.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vegard Nossum <vegard.nossum@gmail.com>
Link: http://lkml.kernel.org/r/1478026378-86083-1-git-send-email-davidcc@google.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-11-15 14:18:22 +01:00
Gabriel Fernandez
2ecaa477b4 ARM: dts: stm32f429: Add QSPI clock
This patch adds the QSPI clock for stm32f469 discovery board.

Signed-off-by: Gabriel Fernandez <gabriel.fernandez@st.com>
Signed-off-by: Alexandre TORGUE <alexandre.torgue@st.com>
2016-11-15 13:59:11 +01:00
Alexandre TORGUE
ec2f9b10f3 ARM: dts: Add STM32F746 MCU and STM32746g-EVAL board
The STMicrolectornics's STM32F746 MCU has the following main features:
 - Cortex-M7 core running up to @216MHz
 - 1MB internal flash, 320KBytes internal RAM (+4KB of backup SRAM)
 - FMC controller to connect SDRAM, NOR and NAND memories
 - Dual mode QSPI
 - SD/MMC/SDIO support
 - Ethernet controller
 - USB OTFG FS & HS controllers
 - I2C, SPI, CAN busses support
 - Several 16 & 32 bits general purpose timers
 - Serial Audio interface
 - LCD controller
 - HDMI-CEC
 - SPDIFRX

Signed-off-by: Alexandre TORGUE <alexandre.torgue@st.com>
2016-11-15 13:59:08 +01:00
Michal Simek
3400606d8f microblaze: Add new fpga families
Add new fpga families where Microblaze can run on.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2016-11-15 13:58:37 +01:00
Michal Simek
8ee80500ad microblaze: Add missing release version code v9.6 and v10
Add missing release version code for v9.6 and v10.0.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2016-11-15 13:58:36 +01:00
Michal Simek
7181e5590e microblaze: Add missing syscalls
The patch adds new syscalls copy_file_range,
preadv2, pwritev2, pkey_mprotect, pkey_alloc,
pkey_free

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2016-11-15 13:58:36 +01:00
Michal Simek
63b7c83ebe microblaze: Fix return value from xilinx_timer_init
The patch
"clocksource/drivers/microblaze: Convert init function to return error"
(sha1: 0586421746)
introduced return value and this one was forgetten to convert.

This patch also remove compilation warning:
arch/microblaze/kernel/timer.c: In function 'xilinx_timer_init':
arch/microblaze/kernel/timer.c:262:3: warning: 'return' with no value,
 in function returning non-void [-Wreturn-type]

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2016-11-15 13:58:24 +01:00
Maarten Lankhorst
5eff503b9d drm/i915/gen9+: Kill off hw_ddb from intel_crtc.
dev_priv->hw_ddb is only used by skl_update_crtcs, but the ddb
allocation for each pipe is calculated in crtc_state.

We can rid of the global member by looking at crtc_state.
Do this by saving all active old ddb allocations from the old crtc_state
in an array, and then point them to the new allocation every time we update
a crtc.

This will allow us to keep track of the intermediate ddb allocations,
which is what hw_ddb was previously used for. With hw_ddb gone all
SKL-style watermark values are properly maintained only in crtc_state.

Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1478609742-13603-5-git-send-email-maarten.lankhorst@linux.intel.com
[mlankhorst: Reword commit message.]
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
2016-11-15 13:13:47 +01:00
Daniel Vetter
2d5e836de7 drm/print: Move kerneldoc next to definition
kerneldoc expects the comment next to definitions, otherwise it can't
pick up exported vs. internal stuff.

This fixes a warning from the doc build done with:

$ make DOCBOOKS="" htmldocs

Fixes: d8187177b0 ("drm: add helper for printing to log or seq_file")
Cc: Rob Clark <robdclark@gmail.com>
Cc: Sean Paul <seanpaul@chromium.org>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20161114115825.22050-8-daniel.vetter@ffwll.ch
2016-11-15 12:55:24 +01:00
Longpeng(Mike)
fd5ebf99f8 arm/arm64: KVM: Clean up useless code in kvm_timer_enable
1) Since commit:41a54482 changed timer enabled variable to per-vcpu,
   the correlative comment in kvm_timer_enable is useless now.

2) After the kvm module init successfully, the timecounter is always
   non-null, so we can remove the checking of timercounter.

Signed-off-by: Longpeng(Mike) <longpeng2@huawei.com>
Acked-by: Christoffer Dall <christoffer.dall@linaro.org>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2016-11-15 11:54:16 +00:00
Daniel Vetter
4f93624ee7 drm: Consolidate dumb buffer docs
Put the callback docs into struct drm_driver, and the small overview
into a DOC comment.

Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20161114115825.22050-7-daniel.vetter@ffwll.ch
2016-11-15 12:51:49 +01:00
Daniel Vetter
6c4789edc5 drm: Clean up kerneldoc for struct drm_driver
Just cleans up what's there, still plenty missing.

Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20161114115825.22050-6-daniel.vetter@ffwll.ch
2016-11-15 12:51:16 +01:00
Daniel Vetter
85e634bce0 drm: Extract drm_drv.h
I want to move dumb buffer documentation into the right vfuncs, and
for that I first need to be able to pull that into kerneldoc without
having to clean up all of drmP.h. Also, header-splitting is nice.

While at it shuffle all the function declarations for drm_drv.c into
the right spots, and drop the kerneldoc for drm_minor_acquire/release
since it's only used internally.

v2: Keep all existing copyright notices (Chris).

Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
2016-11-15 12:50:30 +01:00
Daniel Vetter
8a5846bf5d doc/dma-buf: Fix up include directives
Would be great if everony could add

$ make DOCBOOKS="" htmldocs

to their build scripts to catch these. 0day should also report them,
not sure why it failed to spot this.

Fixes: f54d186700 ("dma-buf: Rename struct fence to dma_fence")
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Cc: Sumit Semwal <sumit.semwal@linaro.org>
Cc: Christian König <christian.koenig@amd.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20161114115825.22050-4-daniel.vetter@ffwll.ch
2016-11-15 12:48:33 +01:00
Daniel Vetter
ebc896db67 drm/i915: Fixup kerneldoc includes
Would be great if everony could add

$ make DOCBOOKS="" htmldocs

to their build scripts to catch these. 0day should also report them,
not sure why it failed to spot this.

Fixes: b42fe9ca0a ("drm/i915: Split out i915_vma.c")
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20161114115825.22050-3-daniel.vetter@ffwll.ch
2016-11-15 12:48:15 +01:00
Daniel Vetter
1a02ea434e drm: Extract drm_dumb_buffers.c
Just code movement, doc cleanup will follow up later.

v2: Keep all the copyright notices.

Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20161114115825.22050-2-daniel.vetter@ffwll.ch
2016-11-15 12:46:36 +01:00
Robin Murphy
62280cf2e8 iommu/iova: Extend cached node lookup condition
When searching for a free IOVA range, we optimise the tree traversal
by starting from the cached32_node, instead of the last node, when
limit_pfn is equal to dma_32bit_pfn. However, if limit_pfn happens to
be smaller, then we'll go ahead and start from the top even though
dma_32bit_pfn is still a more suitable upper bound. Since this is
clearly a silly thing to do, adjust the lookup condition appropriately.

Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
2016-11-15 12:39:52 +01:00
Miklos Szeredi
59c3b76cc6 fuse: fix fuse_write_end() if zero bytes were copied
If pos is at the beginning of a page and copied is zero then page is not
zeroed but is marked uptodate.

Fix by skipping everything except unlock/put of page if zero bytes were
copied.

Reported-by: Al Viro <viro@zeniv.linux.org.uk>
Fixes: 6b12c1b37e ("fuse: Implement write_begin/write_end callbacks")
Cc: <stable@vger.kernel.org> # v3.15+
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2016-11-15 12:34:21 +01:00
Kefeng Wang
3b23aabfcd ARM: dts: hisi-x5hd2: Remove skeleton.dtsi inclusion
Since commit 9c0da3cc61 ("ARM: dts: explicitly mark skeleton.dtsi
as deprecated"), remove deprecated skeleton.dtsi.

Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
2016-11-15 11:30:55 +00:00
Kefeng Wang
4899138fa7 ARM: dts: hi3620: Remove skeleton.dtsi inclusion
Since commit 9c0da3cc61 ("ARM: dts: explicitly mark skeleton.dtsi
as deprecated"), remove deprecated skeleton.dtsi.

Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
2016-11-15 11:30:50 +00:00
Kefeng Wang
ca34ab2025 ARM: dts: hip01: Remove skeleton.dtsi inclusion
Since commit 9c0da3cc61 ("ARM: dts: explicitly mark skeleton.dtsi
as deprecated"), remove deprecated skeleton.dtsi.

Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
2016-11-15 11:30:41 +00:00
Robin Murphy
5d1d43b0f6 iommu/mediatek: Fix M4Uv1 group refcounting
For each subsequent device assigned to the m4u_group after its initial
allocation, we need to take an additional reference. Otherwise, the
caller of iommu_group_get_for_dev() will inadvertently remove the
reference taken by iommu_group_add_device(), and the group will be
freed prematurely if any device is removed.

Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
2016-11-15 12:25:33 +01:00
Robin Murphy
3a8d40b6ce iommu/mediatek: Fix M4Uv2 group refcounting
For each subsequent device assigned to the m4u_group after its initial
allocation, we need to take an additional reference. Otherwise, the
caller of iommu_group_get_for_dev() will inadvertently remove the
reference taken by iommu_group_add_device(), and the group will be
freed prematurely if any device is removed.

Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
2016-11-15 12:25:33 +01:00
Robin Murphy
f2f101f6bc iommu/amd: Fix group refcounting
If acpihid_device_group() finds an existing group for the relevant
devid, it should be taking an additional reference on that group.
Otherwise, the caller of iommu_group_get_for_dev() will inadvertently
remove the reference taken by iommu_group_add_device(), and the group
will be freed prematurely if any device is removed.

Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
2016-11-15 12:25:33 +01:00
Robin Murphy
e1b44cbe7b iommu/arm-smmu: Fix group refcounting
When arm_smmu_device_group() finds an existing group due to Stream ID
aliasing, it should be taking an additional reference on that group.
Otherwise, the caller of iommu_group_get_for_dev() will inadvertently
remove the reference taken by iommu_group_add_device(), and the group
will be freed prematurely if any device is removed.

Reported-by: Sricharan R <sricharan@codeaurora.org>
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
2016-11-15 12:25:33 +01:00
Robin Murphy
13f59a78c6 iommu: Allow taking a reference on a group directly
iommu_group_get_for_dev() expects that the IOMMU driver's device_group
callback return a group with a reference held for the given device.
Whilst allocating a new group is fine, and pci_device_group() correctly
handles reusing an existing group, there is no general means for IOMMU
drivers doing their own group lookup to take additional references on an
existing group pointer without having to also store device pointers or
resort to elaborate trickery.

Add an IOMMU-driver-specific function to fill the hole.

Acked-by: Sricharan R <sricharan@codeaurora.org>
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
2016-11-15 12:25:33 +01:00
Marek Vasut
196594efc2 drm/fb_cma_helper: Add missing forward declaration
Add missing forward declaration for struct drm_plane and drm_plane_state,
which causes the following warning in the VC4 driver (can be replicated
by building using bcm2835_defconfig):

In file included from drivers/gpu/drm/vc4/vc4_drv.c:18:0:
include/drm/drm_fb_cma_helper.h:45:13: warning: ‘struct drm_plane_state’ declared inside parameter list will not be visible outside of this definition or declaration
      struct drm_plane_state *state);
             ^~~~~~~~~~~~~~~
include/drm/drm_fb_cma_helper.h:44:34: warning: ‘struct drm_plane’ declared inside parameter list will not be visible outside of this definition or declaration
 int drm_fb_cma_prepare_fb(struct drm_plane *plane,

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20161115105529.3227-1-marex@denx.de
2016-11-15 12:24:08 +01:00
Jason Gerecke
9ce9a123d9 HID: wacom: Declare tool ID 0x84a as an Intuos eraser
The eraser end of the 8K pen available for the MobileStudio Pro has a tool
ID of 0x84a. The 'wacom_intuos_get_tool_type' function does not currently
recognize this ID, causing it to return BTN_TOOL_PEN rather than
BTN_TOOL_RUBBER. This does not cause a problem for the MobileStudio Pro
since, as a HID_GENERIC device, the driver relies on the state of the
HID_DG_INVERT usage instead. It would, however, cause problems if the pen
is used with devices that use the traditional 'wacom_intuos_irq' codepath
instead.

Signed-off-by: Jason Gerecke <jason.gerecke@wacom.com>
Acked-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2016-11-15 12:15:04 +01:00
Dan Carpenter
a35f09b849 HID: wacom: Don't clear bits unintentionally
This is trying to clear the lower 32 bits but the type is wrong so it
clears everything.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2016-11-15 12:11:50 +01:00
Alexandre TORGUE
6bc18b83c0 ARM: Kconfig: Introduce MACH_STM32F746 flag
This patch introduces the MACH_STM32F746 to make possible to only select
STM32F746 pinctrl driver

By default, all the MACH_STM32Fxxx flags will be set with STM32 defconfig.

Signed-off-by: Alexandre TORGUE <alexandre.torgue@st.com>
2016-11-15 12:02:59 +01:00
Alexandre TORGUE
a77e393c32 ARM: mach-stm32: Add a new SOC - STM32F746
Signed-off-by: Alexandre TORGUE <alexandre.torgue@st.com>
2016-11-15 12:02:33 +01:00
John Garry
85f5bd9e77 arm64: dts: hisi: add refclk node to hip06 dts files for SAS
We will only maintain 1 dts for D03 and there are 50MHz
and 66MHz versions of D03: so we expect UEFI to update
refclk rate in the fdt at boot time.

Signed-off-by: John Garry <john.garry@huawei.com>
Reviewed-by: Xiang Chen <chenxiang66@hisilicon.com>
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
2016-11-15 10:58:41 +00:00
John Garry
84ad1f5409 arm64: dts: hisi: disable sas0 and sas2 for d03
The SAS nodes sas0 and sas2 are not available on d03, so
disable them.

Signed-off-by: John Garry <john.garry@huawei.com>
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
2016-11-15 10:58:12 +00:00
John Garry
f65e786604 arm64: dts: hisi: fix hip06 sas am-max-trans quirk
The string for the am max transmissions quirk property
is not correct -> fix it.

Signed-off-by: John Garry <john.garry@huawei.com>
Reviewed-by: Xiang Chen <chenxiang66@hisilicon.com>
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
2016-11-15 10:42:59 +00:00
Kefeng Wang
06b2967655 arm64: dts: hip06: Fix no reg property warning
Warning (unit_address_vs_reg): Node /soc/ethernet@4 has a unit name, but no reg property
Warning (unit_address_vs_reg): Node /soc/ethernet@5 has a unit name, but no reg property
Warning (unit_address_vs_reg): Node /soc/ethernet@0 has a unit name, but no reg property
Warning (unit_address_vs_reg): Node /soc/ethernet@1 has a unit name, but no reg property

Fix warning when build with W=1.

Cc: Kejian Yan <yankejian@huawei.com>
Cc: Yisen Zhuang <yisen.zhuang@huawei.com>
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
2016-11-15 10:40:26 +00:00
Kefeng Wang
4f357f94e1 arm64: dts: hisilicon: Add initial dts for Hip07 D05 board
Adding initial dt file for Hip07 D05 board, it is with dual socket
and each socket has two SCCLs(supper cpu cluster), one SCCL contains
four clusters and each cluster has quard Cortex-A72.

Since each SCCL has their own DDR controller, it could be treated as
a separate numa node. Thus, there are four numa nodes(one node with
sixteen core) on Hip07 SoC.

Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
2016-11-15 10:36:17 +00:00
Kefeng Wang
2c6aa008b8 Documentation: arm64: Add Hisilicon Hip07 D05 dts binding
This patch adds documentation for the devicetree bindings used by
the DT files of Hisilicon Hip07 D05 board.

Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
2016-11-15 10:36:15 +00:00
Kefeng Wang
4d75a171b6 arm64: dts: hip06: Correct hardware pin number of usb node
The ohci/ehci hardware pin number should be 640/641, correct them.

Fixes: commit aa8d3e74f5 ("arm64: dts: Add initial dts for Hisilicon Hip06 D03 board")
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
2016-11-15 10:36:13 +00:00
Loic Pallardy
5bf7b6e86f ARM: dts: STiH410-b2260: Fix typo in spi0 chipselect definition
Change cs-gpio to cs-gpios.

Signed-off-by: Loic Pallardy <loic.pallardy@st.com>
Acked-by: Patrice Chotard <patrice.chotard@st.com>
2016-11-15 11:29:25 +01:00
Maarten Lankhorst
512b552798 drm/i915/gen9+: Preserve old allocation from crtc_state.
This is the last bit required for making nonblocking modesets work
correctly. The state in intel_crtc->hw_ddb is updated in the
nonblocking part of a nonblocking commit.

This means that even attempting a commit before a nonblocking modeset
completes will fail, because intel_crtc->hw_ddb still has stale values.
The stale values are 0 if the crtc is being enabled resulting in a
failure during atomic check, but it may also result in double use of
ddb allocations.

Fix this by explicitly copying the ddb allocation from the old state.
This has to be done explicitly, because a modeset that doesn't change
active pipes, or a modeset converted to a fastset will will clear the
current state.

Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1478609742-13603-4-git-send-email-maarten.lankhorst@linux.intel.com
[mlankhorst: Reword commit message.]
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
2016-11-15 11:23:11 +01:00