Commit graph

661,541 commits

Author SHA1 Message Date
Xin Long
ecc515d723 sctp: fix the panic caused by route update
Commit 7303a14750 ("sctp: identify chunks that need to be fragmented
at IP level") made the chunk be fragmented at IP level in the next round
if it's size exceed PMTU.

But there still is another case, PMTU can be updated if transport's dst
expires and transport's pmtu_pending is set in sctp_packet_transmit. If
the new PMTU is less than the chunk, the same issue with that commit can
be triggered.

So we should drop this packet and let it retransmit in another round
where it would be fragmented at IP level.

This patch is to fix it by checking the chunk size after PMTU may be
updated and dropping this packet if it's size exceed PMTU.

Fixes: 90017accff ("sctp: Add GSO support")
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Neil Horman <nhorman@txudriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-26 17:32:19 -04:00
Stephen Hemminger
293de7dee4 doc: update docbook annotations for socket and skb
The skbuff and sock structure both had missing parameter annotation
values.

Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-26 17:31:23 -04:00
Elad Raz
6edf10173a devlink: Prevent port_type_set() callback when it's not needed
When a port_type_set() is been called and the new port type set is the same
as the old one, just return success.

Signed-off-by: Elad Raz <eladr@mellanox.com>
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-26 17:30:32 -04:00
Stefan Richter
89ab88b01b firewire: net: set initial MTU = 1500 unconditionally, fix IPv6 on some CardBus cards
firewire-net, like the older eth1394 driver, reduced the initial MTU to
less than 1500 octets if the local link layer controller's asynchronous
packet reception limit was lower.

This is bogus, since this reception limit does not have anything to do
with the transmission limit.  Neither did this reduction affect the TX
path positively, nor could it prevent link fragmentation at the RX path.

Many FireWire CardBus cards have a max_rec of 9, causing an initial MTU
of 1024 - 16 = 1008.  RFC 2734 and RFC 3146 allow a minimum max_rec = 8,
which would result in an initial MTU of 512 - 16 = 496.  On such cards,
IPv6 could only be employed if the MTU was manually increased to 1280 or
more, i.e. IPv6 would not work without intervention from userland.

We now always initialize the MTU to 1500, which is the default according
to RFC 2734 and RFC 3146.

On a VIA VT6316 based CardBus card which was affected by this, changing
the MTU from 1008 to 1500 also increases TX bandwidth by 6 %.
RX remains unaffected.

CC: netdev@vger.kernel.org
CC: linux1394-devel@lists.sourceforge.net
CC: Jarod Wilson <jarod@redhat.com>
Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-26 17:28:50 -04:00
Stefan Richter
5d48f00d83 firewire: net: fix maximum possible MTU
Commit b3e3893e12 ("net: use core MTU range checking in misc drivers")
mistakenly introduced an upper limit for firewire-net's MTU based on the
local link layer controller's reception capability.  Revert this.  Neither
RFC 2734 nor our implementation impose any particular upper limit.

Actually, to be on the safe side and to make the code explicit, set
ETH_MAX_MTU = 65535 as upper limit now.

(I replaced sizeof(struct rfc2734_header) by the equivalent
RFC2374_FRAG_HDR_SIZE in order to avoid distracting long/int conversions.)

Fixes: b3e3893e1253('net: use core MTU range checking in misc drivers')
CC: netdev@vger.kernel.org
CC: linux1394-devel@lists.sourceforge.net
CC: Jarod Wilson <jarod@redhat.com>
Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
Acked-by: Jarod Wilson <jarod@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-26 17:28:50 -04:00
Wei Yongjun
e2897b8238 net: netcp: add missing of_node_put() in netcp_probe()
This node pointer is returned by of_get_child_by_name() with refcount
incremented in this function. of_node_put() on it before exitting this
function.

This is detected by Coccinelle semantic patch.

Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-26 17:21:59 -04:00
Wei Yongjun
f850b4a77d net: ena: use setup_timer() and mod_timer()
Use setup_timer() instead of init_timer(), being the preferred/standard
way to set a timer up.

Also, quoting the mod_timer() function comment:
-> mod_timer() is a more efficient way to update the expire field of an
   active timer (if the timer is inactive it will be activated).

Use setup_timer and mod_timer to setup and arm a timer, to make the code
cleaner and easier to read.

Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-26 17:21:59 -04:00
Wei Yongjun
675a6ceefc amd-xgbe: Fix error return code in xgbe_probe()
Fix to return error code -ENODEV from the DMA is not supported error
handling case instead of 0, as done elsewhere in this function.

Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Acked-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-26 17:21:59 -04:00
Wei Yongjun
0942170f32 net: ns83820: use dev_kfree_skb_irq instead of kfree_skb
It is not allowed to call kfree_skb() from hardware interrupt
context or with interrupts being disabled, spin_lock_irqsave()
make sure always in irq disable context. So the kfree_skb()
should be replaced with dev_kfree_skb_irq().

This is detected by Coccinelle semantic patch.

Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-26 17:21:59 -04:00
Wei Yongjun
a24a9d7aca net: eth: altera: Fix error return code in altera_tse_probe()
Fix to return error code -EINVAL from the error handling
case instead of 0, as done elsewhere in this function.

Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-26 17:21:59 -04:00
Wei Yongjun
68497a87c4 net: dsa: mv88e6xxx: use setup_timer to simplify the code
Use setup_timer function instead of initializing timer with the function
and data fields.

Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-26 17:21:59 -04:00
Wei Yongjun
1aaa87aff6 net: netcp: drop kfree for memory allocated with devm_kzalloc
It's not necessary to free memory allocated with devm_kzalloc in the
remove path and using kfree leads to a double free.

Fixes: 84640e27f2 ("net: netcp: Add Keystone NetCP core ethernet
driver")
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-26 17:21:59 -04:00
Anusha Srivatsa
1c00164d4c drm/i915/DMC/KBL: Load DMC on KBL using the no_stepping_info array
Currently, for display there is only one DMC image for KBL.
Remove the stepping_info table for KBL and use the no_stepping_info
array for loading the firmware.

v2: Removed the block of code as pointed out by Rodrigo to make the
loads as generic as possible.

Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Anusha Srivatsa <anusha.srivatsa@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Acked-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1477355301-7035-1-git-send-email-anusha.srivatsa@intel.com
2016-10-26 14:20:53 -07:00
Wei Yongjun
92d230dd8c rocker: fix error return code in rocker_world_check_init()
Fix to return error code -EINVAL from the error handling
case instead of 0, as done elsewhere in this function.

Fixes: e420114eef ("rocker: introduce worlds infrastructure")
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-26 17:20:36 -04:00
Sven Eckelmann
701470baba batman-adv: Revert "use core MTU range checking in misc drivers"
The maximum MTU is defined via the slave devices of an batman-adv
interface. Thus it is not possible to calculate the max_mtu during the
creation of the batman-adv device when no slave devices are attached. Doing
so would for example break non-fragmentation setups which then
(incorrectly) allow an MTU of 1500 even when underlying device cannot
transport 1500 bytes + batman-adv headers.

Checking the dynamically calculated max_mtu via the minimum of the slave
devices MTU during .ndo_change_mtu is also used by the bridge interface.

Cc: Jarod Wilson <jarod@redhat.com>
Fixes: b3e3893e12 ("net: use core MTU range checking in misc drivers")
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-26 17:19:07 -04:00
David S. Miller
f806f77247 Merge branch 'BCM54612E'
Xo Wang says:

====================
Broadcom BCM54612E support

This series is based on tip of torvalds/master.

The first patch adds register definitions from Broadcom docs.

The second patch adds the BCM54612E PHY ID, flags, and device-specific
RGMII internal delay initialization.

I tested on a custom board with an Aspeed AST2500 SOC with its second
MAC connected to this PHY.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-26 17:15:27 -04:00
Xo Wang
d92ead16be net: phy: broadcom: Add support for BCM54612E
This PHY has internal delays enabled after reset. This clears the
internal delay enables unless the interface specifically requests them.

Signed-off-by: Xo Wang <xow@google.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-26 17:15:26 -04:00
Xo Wang
3cf25904fe net: phy: broadcom: Update Auxiliary Control Register macros
Add the RXD-to-RXC skew (delay) time bit in the Miscellaneous Control
shadow register and a mask for the shadow selector field.

Remove a re-definition of MII_BCM54XX_AUXCTL_SHDWSEL_AUXCTL.

Signed-off-by: Xo Wang <xow@google.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-26 17:15:26 -04:00
Eric Dumazet
73e42ff72a sch_htb: do not report fake rate estimators
When I prepared commit d250a5f90e ("pkt_sched: gen_estimator: Dont
report fake rate estimators"), htb still had an implicit rate estimator
for all its classes.

Then later, I made this rate estimator optional in commit 64153ce0a7
("net_sched: htb: do not setup default rate estimators"), but I forgot
to update htb use of gnet_stats_copy_rate_est()

After this patch, "tc -s qdisc ..." no longer report fake rate
estimators for HTB classes.

Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-26 17:13:49 -04:00
Fenghua Yu
6b281569df x86/cqm: Share PQR_ASSOC related data between CQM and CAT
PQR_ASSOC MSR contains the RMID used for preformance monitoring of cache
occupancy and memory bandwidth. The upper 32bit of this MSR contain the
CLOSID for cache allocation. So we need to share the information between
the two facilities.

Move the rdt data structure declaration into the shared header file and
make the per cpu data structure containing the MSR values global.

Signed-off-by: Fenghua Yu <fenghua.yu@intel.com>
Cc: "Ravi V Shankar" <ravi.v.shankar@intel.com>
Cc: "Tony Luck" <tony.luck@intel.com>
Cc: "David Carrillo-Cisneros" <davidcc@google.com>
Cc: "Sai Prakhya" <sai.praneeth.prakhya@intel.com>
Cc: "Peter Zijlstra" <peterz@infradead.org>
Cc: "Stephane Eranian" <eranian@google.com>
Cc: "Dave Hansen" <dave.hansen@intel.com>
Cc: "Shaohua Li" <shli@fb.com>
Cc: "Nilay Vaish" <nilayvaish@gmail.com>
Cc: "Vikas Shivappa" <vikas.shivappa@linux.intel.com>
Cc: "Ingo Molnar" <mingo@elte.hu>
Cc: "Borislav Petkov" <bp@suse.de>
Cc: "H. Peter Anvin" <h.peter.anvin@intel.com>
Link: http://lkml.kernel.org/r/1477142405-32078-10-git-send-email-fenghua.yu@intel.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-10-26 23:12:39 +02:00
Fenghua Yu
c1c7c3f9d6 x86/intel_rdt: Pick up L3/L2 RDT parameters from CPUID
Define struct rdt_resource to hold all the parameterized values for an RDT
resource and fill in the CPUID enumerated values from leaf 0x10 if
available. Hard code them for the MSR detected Haswells.

Signed-off-by: Fenghua Yu <fenghua.yu@intel.com>
Cc: "Ravi V Shankar" <ravi.v.shankar@intel.com>
Cc: "Tony Luck" <tony.luck@intel.com>
Cc: "David Carrillo-Cisneros" <davidcc@google.com>
Cc: "Sai Prakhya" <sai.praneeth.prakhya@intel.com>
Cc: "Peter Zijlstra" <peterz@infradead.org>
Cc: "Stephane Eranian" <eranian@google.com>
Cc: "Dave Hansen" <dave.hansen@intel.com>
Cc: "Shaohua Li" <shli@fb.com>
Cc: "Nilay Vaish" <nilayvaish@gmail.com>
Cc: "Vikas Shivappa" <vikas.shivappa@linux.intel.com>
Cc: "Ingo Molnar" <mingo@elte.hu>
Cc: "Borislav Petkov" <bp@suse.de>
Cc: "H. Peter Anvin" <h.peter.anvin@intel.com>
Link: http://lkml.kernel.org/r/1477142405-32078-9-git-send-email-fenghua.yu@intel.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-10-26 23:12:39 +02:00
Fenghua Yu
113c60970c x86/intel_rdt: Add Haswell feature discovery
Some Haswell generation CPUs support RDT, but they don't enumerate this via
CPUID.  Use rdmsr_safe() and wrmsr_safe() to probe the MSRs on cpu model 63
(INTEL_FAM6_HASWELL_X)

Move the relevant defines into a common header file which is shared between
RDT/CQM and RDT/Allocation to avoid duplication.

Signed-off-by: Fenghua Yu <fenghua.yu@intel.com>
Cc: "Ravi V Shankar" <ravi.v.shankar@intel.com>
Cc: "Tony Luck" <tony.luck@intel.com>
Cc: "David Carrillo-Cisneros" <davidcc@google.com>
Cc: "Sai Prakhya" <sai.praneeth.prakhya@intel.com>
Cc: "Peter Zijlstra" <peterz@infradead.org>
Cc: "Stephane Eranian" <eranian@google.com>
Cc: "Dave Hansen" <dave.hansen@intel.com>
Cc: "Shaohua Li" <shli@fb.com>
Cc: "Nilay Vaish" <nilayvaish@gmail.com>
Cc: "Vikas Shivappa" <vikas.shivappa@linux.intel.com>
Cc: "Ingo Molnar" <mingo@elte.hu>
Cc: "Borislav Petkov" <bp@suse.de>
Cc: "H. Peter Anvin" <h.peter.anvin@intel.com>
Link: http://lkml.kernel.org/r/1477142405-32078-8-git-send-email-fenghua.yu@intel.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-10-26 23:12:38 +02:00
Fenghua Yu
78e99b4a2b x86/intel_rdt: Add CONFIG, Makefile, and basic initialization
Introduce CONFIG_INTEL_RDT_A (default: no, dependent on CPU_SUP_INTEL) to
control inclusion of Resource Director Technology in the build.

Simple init() routine just checks which features are present. If they are
pr_info() one line summary for each feature for now.

Signed-off-by: Fenghua Yu <fenghua.yu@intel.com>
Cc: "Ravi V Shankar" <ravi.v.shankar@intel.com>
Cc: "Tony Luck" <tony.luck@intel.com>
Cc: "David Carrillo-Cisneros" <davidcc@google.com>
Cc: "Sai Prakhya" <sai.praneeth.prakhya@intel.com>
Cc: "Peter Zijlstra" <peterz@infradead.org>
Cc: "Stephane Eranian" <eranian@google.com>
Cc: "Dave Hansen" <dave.hansen@intel.com>
Cc: "Shaohua Li" <shli@fb.com>
Cc: "Nilay Vaish" <nilayvaish@gmail.com>
Cc: "Vikas Shivappa" <vikas.shivappa@linux.intel.com>
Cc: "Ingo Molnar" <mingo@elte.hu>
Cc: "Borislav Petkov" <bp@suse.de>
Cc: "H. Peter Anvin" <h.peter.anvin@intel.com>
Link: http://lkml.kernel.org/r/1477142405-32078-7-git-send-email-fenghua.yu@intel.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-10-26 23:12:38 +02:00
Fenghua Yu
4ab1586488 x86/cpufeature: Add RDT CPUID feature bits
Check CPUID leaves for all the Resource Director Technology (RDT)
Cache Allocation Technology (CAT) bits.

Presence of allocation features:
  CPUID.(EAX=7H, ECX=0):EBX[bit 15]	X86_FEATURE_RDT_A

L2 and L3 caches are each separately enabled:
  CPUID.(EAX=10H, ECX=0):EBX[bit 1]	X86_FEATURE_CAT_L3
  CPUID.(EAX=10H, ECX=0):EBX[bit 2]	X86_FEATURE_CAT_L2

L3 cache may support independent control of allocation for
code and data (CDP = Code/Data Prioritization):
  CPUID.(EAX=10H, ECX=1):ECX[bit 2]	X86_FEATURE_CDP_L3

[ tglx: Fixed up Borislavs comments and moved the feature bits into a gap ]

Signed-off-by: Fenghua Yu <fenghua.yu@intel.com>
Acked-by: "Borislav Petkov" <bp@suse.de>
Cc: "Ravi V Shankar" <ravi.v.shankar@intel.com>
Cc: "Tony Luck" <tony.luck@intel.com>
Cc: "David Carrillo-Cisneros" <davidcc@google.com>
Cc: "Sai Prakhya" <sai.praneeth.prakhya@intel.com>
Cc: "Peter Zijlstra" <peterz@infradead.org>
Cc: "Stephane Eranian" <eranian@google.com>
Cc: "Dave Hansen" <dave.hansen@intel.com>
Cc: "Shaohua Li" <shli@fb.com>
Cc: "Nilay Vaish" <nilayvaish@gmail.com>
Cc: "Vikas Shivappa" <vikas.shivappa@linux.intel.com>
Cc: "Ingo Molnar" <mingo@elte.hu>
Cc: "H. Peter Anvin" <h.peter.anvin@intel.com>
Link: http://lkml.kernel.org/r/1477142405-32078-5-git-send-email-fenghua.yu@intel.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-10-26 23:12:38 +02:00
Fenghua Yu
d57e3ab7e3 x86/intel_cacheinfo: Enable cache id in cache info
Cache id is retrieved from APIC ID and CPUID leaf 4 on x86.

For more details please see the section on "Cache ID Extraction
Parameters" in "Intel 64 Architecture Processor Topology Enumeration".

Also the documentation of the CPUID instruction in the "Intel 64 and
IA-32 Architectures Software Developer's Manual"

Signed-off-by: Fenghua Yu <fenghua.yu@intel.com>
Cc: "Ravi V Shankar" <ravi.v.shankar@intel.com>
Cc: "Tony Luck" <tony.luck@intel.com>
Cc: "David Carrillo-Cisneros" <davidcc@google.com>
Cc: "Sai Prakhya" <sai.praneeth.prakhya@intel.com>
Cc: "Peter Zijlstra" <peterz@infradead.org>
Cc: "Stephane Eranian" <eranian@google.com>
Cc: "Dave Hansen" <dave.hansen@intel.com>
Cc: "Shaohua Li" <shli@fb.com>
Cc: "Nilay Vaish" <nilayvaish@gmail.com>
Cc: "Vikas Shivappa" <vikas.shivappa@linux.intel.com>
Cc: "Ingo Molnar" <mingo@elte.hu>
Cc: "Borislav Petkov" <bp@suse.de>
Cc: "H. Peter Anvin" <h.peter.anvin@intel.com>
Link: http://lkml.kernel.org/r/1477142405-32078-4-git-send-email-fenghua.yu@intel.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-10-26 23:12:37 +02:00
Fenghua Yu
e9a2ea5a1b cacheinfo: Introduce cache id
Cache management software needs an id for each instance of a cache of
a particular type.

The current cacheinfo structure does not provide any information about
the underlying hardware so there is no way to expose it.

Hardware with cache management features provides means (cpuid, enumeration
etc.) to retrieve the hardware id of a particular cache instance. Cache
instances which share hardware have the same hardware id.

Add an 'id' field to struct cacheinfo to store this information. Expose
this information under the /sys/devices/system/cpu/cpu*/cache/index*/
directory as well.

Signed-off-by: Fenghua Yu <fenghua.yu@intel.com>
Cc: "Ravi V Shankar" <ravi.v.shankar@intel.com>
Cc: "Tony Luck" <tony.luck@intel.com>
Cc: "David Carrillo-Cisneros" <davidcc@google.com>
Cc: "Sai Prakhya" <sai.praneeth.prakhya@intel.com>
Cc: "Peter Zijlstra" <peterz@infradead.org>
Cc: "Stephane Eranian" <eranian@google.com>
Cc: "Dave Hansen" <dave.hansen@intel.com>
Cc: "Shaohua Li" <shli@fb.com>
Cc: "Nilay Vaish" <nilayvaish@gmail.com>
Cc: "Vikas Shivappa" <vikas.shivappa@linux.intel.com>
Cc: "Ingo Molnar" <mingo@elte.hu>
Cc: "Borislav Petkov" <bp@suse.de>
Cc: "H. Peter Anvin" <h.peter.anvin@intel.com>
Link: http://lkml.kernel.org/r/1477142405-32078-3-git-send-email-fenghua.yu@intel.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-10-26 23:12:37 +02:00
Tony Luck
1d78dc59f5 Documentation, ABI: Document the new sysfs files for cpu cache ids
Add an ABI document entry for /sys/devices/system/cpu/cpu*/cache/index*/id.

Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Fenghua Yu <fenghua.yu@intel.com>
Cc: "Ravi V Shankar" <ravi.v.shankar@intel.com>
Cc: "David Carrillo-Cisneros" <davidcc@google.com>
Cc: "Sai Prakhya" <sai.praneeth.prakhya@intel.com>
Cc: "Peter Zijlstra" <peterz@infradead.org>
Cc: "Stephane Eranian" <eranian@google.com>
Cc: "Dave Hansen" <dave.hansen@intel.com>
Cc: "Shaohua Li" <shli@fb.com>
Cc: "Nilay Vaish" <nilayvaish@gmail.com>
Cc: "Vikas Shivappa" <vikas.shivappa@linux.intel.com>
Cc: "Ingo Molnar" <mingo@elte.hu>
Cc: "Borislav Petkov" <bp@suse.de>
Cc: "H. Peter Anvin" <h.peter.anvin@intel.com>
Link: http://lkml.kernel.org/r/1477142405-32078-2-git-send-email-fenghua.yu@intel.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-10-26 23:12:37 +02:00
Imre Deak
9ff7a1b0ba drm: Print some debug/error info during DP dual mode detect
There's at least one LSPCON device that occasionally returns an unexpected
adaptor ID which leads to a failed detect. Print some debug info to help
debugging this and future cases. Also print an error for an unexpected
adaptor ID, so users can report it.

v2:
- s/adapter/adaptor/ and add code comment about incorrect type 1 adaptor
  IDs. (Ville)

Cc: dri-devel@lists.freedesktop.org
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: http://patchwork.freedesktop.org/patch/msgid/1477499359-12001-1-git-send-email-imre.deak@intel.com
2016-10-26 15:57:11 -04:00
J. Bruce Fields
2876a34466 sunrpc: don't pass on-stack memory to sg_set_buf
As of ac4e97abce "scatterlist: sg_set_buf() argument must be in linear
mapping", sg_set_buf hits a BUG when make_checksum_v2->xdr_process_buf,
among other callers, passes it memory on the stack.

We only need a scatterlist to pass this to the crypto code, and it seems
like overkill to require kmalloc'd memory just to encrypt a few bytes,
but for now this seems the best fix.

Many of these callers are in the NFS write paths, so we allocate with
GFP_NOFS.  It might be possible to do without allocations here entirely,
but that would probably be a bigger project.

Cc: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2016-10-26 15:49:48 -04:00
Vlad Tsyrklevich
05692d7005 vfio/pci: Fix integer overflows, bitmask check
The VFIO_DEVICE_SET_IRQS ioctl did not sufficiently sanitize
user-supplied integers, potentially allowing memory corruption. This
patch adds appropriate integer overflow checks, checks the range bounds
for VFIO_IRQ_SET_DATA_NONE, and also verifies that only single element
in the VFIO_IRQ_SET_DATA_TYPE_MASK bitmask is set.
VFIO_IRQ_SET_ACTION_TYPE_MASK is already correctly checked later in
vfio_pci_set_irqs_ioctl().

Furthermore, a kzalloc is changed to a kcalloc because the use of a
kzalloc with an integer multiplication allowed an integer overflow
condition to be reached without this patch. kcalloc checks for overflow
and should prevent a similar occurrence.

Signed-off-by: Vlad Tsyrklevich <vlad@tsyrklevich.net>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2016-10-26 13:49:29 -06:00
Arnd Bergmann
329f4c812a drm: mark drm_of_component_match_add dummy inline
The newly added drm_of_component_match_add helper is defined as
'static' in a header when CONFIG_OF is disabled, causing a warning
each time the header is included:

In file included from /git/arm-soc/drivers/gpu/drm/bridge/dw-hdmi.c:23:0:
include/drm/drm_of.h:33:13: error: 'drm_of_component_match_add' defined but not used [-Werror=unused-function]

This marks it 'inline' like the other such helpers in this file.

Fixes: 97ac0e47ae ("drm: convert DT component matching to component_match_add_release()")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: http://patchwork.freedesktop.org/patch/msgid/20161026085759.3875472-1-arnd@arndb.de
2016-10-26 15:48:42 -04:00
Srinivas Kandagatla
ad110449e2 PCI: qcom: Fix pp->dev usage before assignment
Initialize pp->dev in qcom_pcie_probe() before calling get_resources(),
which uses it.

[bhelgaas: changelog]
Fixes: e6a087eeaf ("PCI: qcom: Remove redundant struct qcom_pcie.dev")
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2016-10-26 14:46:39 -05:00
Alex Deucher
7dc86ef5ac drm/radeon/si_dpm: workaround for SI kickers
Consolidate existing quirks. Fixes stability issues
on some kickers.

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2016-10-26 15:39:59 -04:00
Rex Zhu
49a5d73fd0 drm/amdgpu: fix s3 resume back, uvd dpm randomly can't disable.
the value of last_mclk_dpm_enable_mask will be changed if
other clients(vce,dal) trigger set power state between enable
and disable uvd dpm.

Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2016-10-26 15:39:32 -04:00
Neeraj Upadhyay
3fa72fe9c6 arm64: mm: fix __page_to_voff definition
Fix parameter name for __page_to_voff, to match its definition.
At present, we don't see any issue, as page_to_virt's caller
declares 'page'.

Fixes: 9f2875912d ("arm64: mm: restrict virt_to_page() to the linear mapping")
Acked-by: Mark Rutland <mark.rutland@arm.com>
Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Neeraj Upadhyay <neeraju@codeaurora.org>
Signed-off-by: Will Deacon <will.deacon@arm.com>
2016-10-26 18:22:42 +01:00
Hanjun Guo
3f7a09f44e arm64/numa: fix incorrect log for memory-less node
When booting on NUMA system with memory-less node (no
memory dimm on this memory controller), the print
for setup_node_data() is incorrect:

NUMA: Initmem setup node 2 [mem 0x00000000-0xffffffffffffffff]

It can be fixed by printing [mem 0x00000000-0x00000000] when
end_pfn is 0, but print <memory-less node> will be more useful.

Fixes: 1a2db30034 ("arm64, numa: Add NUMA support for arm64 platforms.")
Signed-off-by: Hanjun Guo <hanjun.guo@linaro.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Ganapatrao Kulkarni <gkulkarni@caviumnetworks.com>
Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Yisheng Xie <xieyisheng1@huawei.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
2016-10-26 18:21:51 +01:00
Yisheng Xie
26984c3bc2 arm64/numa: fix pcpu_cpu_distance() to get correct CPU proximity
The pcpu_build_alloc_info() function group CPUs according to their
proximity, by call callback function @cpu_distance_fn from different
ARCHs.

For arm64 the callback of @cpu_distance_fn is
    pcpu_cpu_distance(from, to)
        -> node_distance(from, to)
The @from and @to for function node_distance() should be nid.

However, pcpu_cpu_distance() in arch/arm64/mm/numa.c just past the
cpu id for @from and @to, and didn't convert to numa node id.

For this incorrect cpu proximity get from ARCH, it may cause each CPU
in one group and make group_cnt out of bound:

	setup_per_cpu_areas()
		pcpu_embed_first_chunk()
			pcpu_build_alloc_info()
in pcpu_build_alloc_info, since cpu_distance_fn will return
REMOTE_DISTANCE if we pass cpu ids (0,1,2...), so
cpu_distance_fn(cpu, tcpu) > LOCAL_DISTANCE will wrongly be ture.

This may results in triggering the BUG_ON(unit != nr_units) later:

[    0.000000] kernel BUG at mm/percpu.c:1916!
[    0.000000] Internal error: Oops - BUG: 0 [#1] PREEMPT SMP
[    0.000000] Modules linked in:
[    0.000000] CPU: 0 PID: 0 Comm: swapper Not tainted 4.9.0-rc1-00003-g14155ca-dirty #26
[    0.000000] Hardware name: Hisilicon Hi1616 Evaluation Board (DT)
[    0.000000] task: ffff000008d6e900 task.stack: ffff000008d60000
[    0.000000] PC is at pcpu_embed_first_chunk+0x420/0x704
[    0.000000] LR is at pcpu_embed_first_chunk+0x3bc/0x704
[    0.000000] pc : [<ffff000008c754f4>] lr : [<ffff000008c75490>] pstate: 800000c5
[    0.000000] sp : ffff000008d63eb0
[    0.000000] x29: ffff000008d63eb0 [    0.000000] x28: 0000000000000000
[    0.000000] x27: 0000000000000040 [    0.000000] x26: ffff8413fbfcef00
[    0.000000] x25: 0000000000000042 [    0.000000] x24: 0000000000000042
[    0.000000] x23: 0000000000001000 [    0.000000] x22: 0000000000000046
[    0.000000] x21: 0000000000000001 [    0.000000] x20: ffff000008cb3bc8
[    0.000000] x19: ffff8413fbfcf570 [    0.000000] x18: 0000000000000000
[    0.000000] x17: ffff000008e49ae0 [    0.000000] x16: 0000000000000003
[    0.000000] x15: 000000000000001e [    0.000000] x14: 0000000000000004
[    0.000000] x13: 0000000000000000 [    0.000000] x12: 000000000000006f
[    0.000000] x11: 00000413fbffff00 [    0.000000] x10: 0000000000000004
[    0.000000] x9 : 0000000000000000 [    0.000000] x8 : 0000000000000001
[    0.000000] x7 : ffff8413fbfcf63c [    0.000000] x6 : ffff000008d65d28
[    0.000000] x5 : ffff000008d65e50 [    0.000000] x4 : 0000000000000000
[    0.000000] x3 : ffff000008cb3cc8 [    0.000000] x2 : 0000000000000040
[    0.000000] x1 : 0000000000000040 [    0.000000] x0 : 0000000000000000
[...]
[    0.000000] Call trace:
[    0.000000] Exception stack(0xffff000008d63ce0 to 0xffff000008d63e10)
[    0.000000] 3ce0: ffff8413fbfcf570 0001000000000000 ffff000008d63eb0 ffff000008c754f4
[    0.000000] 3d00: ffff000008d63d50 ffff0000081af210 00000413fbfff010 0000000000001000
[    0.000000] 3d20: ffff000008d63d50 ffff0000081af220 00000413fbfff010 0000000000001000
[    0.000000] 3d40: 00000413fbfcef00 0000000000000004 ffff000008d63db0 ffff0000081af390
[    0.000000] 3d60: 00000413fbfcef00 0000000000001000 0000000000000000 0000000000001000
[    0.000000] 3d80: 0000000000000000 0000000000000040 0000000000000040 ffff000008cb3cc8
[    0.000000] 3da0: 0000000000000000 ffff000008d65e50 ffff000008d65d28 ffff8413fbfcf63c
[    0.000000] 3dc0: 0000000000000001 0000000000000000 0000000000000004 00000413fbffff00
[    0.000000] 3de0: 000000000000006f 0000000000000000 0000000000000004 000000000000001e
[    0.000000] 3e00: 0000000000000003 ffff000008e49ae0
[    0.000000] [<ffff000008c754f4>] pcpu_embed_first_chunk+0x420/0x704
[    0.000000] [<ffff000008c6658c>] setup_per_cpu_areas+0x38/0xc8
[    0.000000] [<ffff000008c608d8>] start_kernel+0x10c/0x390
[    0.000000] [<ffff000008c601d8>] __primary_switched+0x5c/0x64
[    0.000000] Code: b8018660 17ffffd7 6b16037f 54000080 (d4210000)
[    0.000000] ---[ end trace 0000000000000000 ]---
[    0.000000] Kernel panic - not syncing: Attempted to kill the idle task!

Fix by getting cpu's node id with early_cpu_to_node() then pass it
to node_distance() as the original intention.

Fixes: 7af3a0a992 ("arm64/numa: support HAVE_SETUP_PER_CPU_AREA")
Signed-off-by: Yisheng Xie <xieyisheng1@huawei.com>
Signed-off-by: Hanjun Guo <hanjun.guo@linaro.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Zhen Lei <thunder.leizhen@huawei.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
2016-10-26 18:21:51 +01:00
David S. Miller
a236441bb6 sparc64: Fix illegal relative branches in hypervisor patched TLB cross-call code.
Just like the non-cross-call TLB flush handlers, the cross-call ones need
to avoid doing PC-relative branches outside of their code blocks.

Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-26 10:20:14 -07:00
David S. Miller
830cda3f98 sparc64: Fix instruction count in comment for __hypervisor_flush_tlb_pending.
Noticed by James Clarke.

Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-26 10:08:22 -07:00
Ville Syrjälä
4da5caa6a6 drm/dp/mst: Check peer device type before attempting EDID read
Only certain types of pdts have the DDC bus registered, so check for
that before we attempt the EDID read. Othwewise we risk playing around
with an i2c adapter that doesn't actually exist.

Cc: stable@vger.kernel.org
Cc: Carlos Santa <carlos.santa@intel.com>
Cc: Kirill A. Shutemov <kirill@shutemov.name>
Tested-by: Carlos Santa <carlos.santa@intel.com>
Tested-by: Kirill A. Shutemov <kirill@shutemov.name>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=97666
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1477472755-15288-5-git-send-email-ville.syrjala@linux.intel.com
2016-10-26 18:53:44 +02:00
Ville Syrjälä
36e3fa6a38 drm/dp/mst: Clear port->pdt when tearing down the i2c adapter
The i2c adapter is only relevant for some peer device types, so
let's clear the pdt if it's still the same as the old_pdt when we
tear down the i2c adapter.

I don't really like this design pattern of updating port->whatever
before doing the accompanying changes and passing around old_whatever
to figure stuff out. Would make much more sense to me to the pass the
new value around and only update the port->whatever when things are
consistent. But let's try to work with what we have right now.

Quoting a follow-up from Ville:

"And naturally I forgot to amend the commit message w.r.t. this guy
[the change in drm_dp_destroy_port].  We don't really need to do this
here, but I figured I'd try to be a bit more consistent by having it,
just to avoid accidental mistakes if/when someone changes this stuff
again later."

v2: Clear port->pdt in the caller, if needed (Daniel)

Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: stable@vger.kernel.org
Cc: Carlos Santa <carlos.santa@intel.com>
Cc: Kirill A. Shutemov <kirill@shutemov.name>
Tested-by: Carlos Santa <carlos.santa@intel.com> (v1)
Tested-by: Kirill A. Shutemov <kirill@shutemov.name> (v1)
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=97666
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1477488633-16544-1-git-send-email-ville.syrjala@linux.intel.com
2016-10-26 18:52:54 +02:00
Ville Syrjälä
a288960663 drm/fb-helper: Keep references for the current set of used connectors
The fbdev helper code keeps around two lists of connectors. One is the
list of all connectors it could use, and that list already holds
references for all the connectors. However the other list, or rather
lists, is the one actively being used. That list is tracked per-crtc
and currently doesn't hold any extra references. Let's grab those
extra references to avoid oopsing when the connector vanishes. The
list of all possible connectors should get updated when the hpd happens,
but the list of actively used connectors would not get updated until
the next time the fb-helper picks through the set of possible connectors.
And so we need to hang on to the connectors until that time.

Since we need to clean up in drm_fb_helper_crtc_free() as well,
let's pull the code to a common place. And while at it let's
pull in up the modeset->mode cleanup in there as well. The case
of modeset->fb is a bit less clear. I'm thinking we should probably
hold a reference to it, but for now I just slapped on a FIXME.

v2: Cleanup things drm_fb_helper_crtc_free() too (Chris)
v3: Don't leak modeset->connectors (Chris)

Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: stable@vger.kernel.org
Cc: Carlos Santa <carlos.santa@intel.com>
Cc: Kirill A. Shutemov <kirill@shutemov.name>
Tested-by: Carlos Santa <carlos.santa@intel.com> (v1)
Tested-by: Kirill A. Shutemov <kirill@shutemov.name> (v1)
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=97666
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1477492878-4990-1-git-send-email-ville.syrjala@linux.intel.com
2016-10-26 18:52:42 +02:00
Ville Syrjälä
38d868e41c drm: Don't force all planes to be added to the state due to zpos
We don't want all planes to be added to the state whenever a
plane with fixed zpos gets enabled/disabled. This is true
especially for eg. cursor planes on i915, as we want cursor
updates to go through w/o throttling. Same holds for drivers
that don't support zpos at all (i915 actually falls into this
category right now since we've not yet added zpos support).

Allow drivers more freedom by letting them deal with zpos
themselves instead of doing it in drm_atomic_helper_check_planes()
unconditionally. Let's just inline the required calls into all
the driver that currently depend on this.

v2: Inline the stuff into the drivers instead of adding another
    helper, document things better (Daniel)

Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Marek Szyprowski <m.szyprowski@samsung.com>
Cc: Benjamin Gaignard <benjamin.gaignard@linaro.org>
Cc: Vincent Abriou <vincent.abriou@st.com>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Inki Dae <inki.dae@samsung.com>
Cc: Joonyoung Shim <jy0922.shim@samsung.com>
Cc: Seung-Woo Kim <sw0312.kim@samsung.com>
Cc: Kyungmin Park <kyungmin.park@samsung.com>
Cc: Lyude <cpaul@redhat.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: stable@vger.kernel.org
Fixes: 44d1240d00 ("drm: add generic zpos property")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Acked-by: Benjamin Gaignard <benjamin.gaignard@linaro.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1476111056-12734-1-git-send-email-ville.syrjala@linux.intel.com
2016-10-26 18:48:05 +02:00
Kuninori Morimoto
814efe3ed7 ASoC: rsnd: clear SSI_SYS_STATUSx every time
Renesas sound SSIU has SSI_SYS_STATUS register whick will
be changed if over/under run was occurred.
Current rsnd driver is handling over/under run error on SSI/SRC,
but doesn't on SSIU.
HW guys can't guarantee correct behavior if it already had error bit
on status register when it start.
Thus, it should be cleared every start timing. This patch do it.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2016-10-26 17:46:17 +01:00
Kuninori Morimoto
42b197e794 ASoC: rsnd: fixup SCU_SYS_STATUSx access
SCU_SYS_STATUSx is the register that writing 1 initializes the bit,
and writing 0 is ignored. So, it should use rsnd_mod_write()
instead of rsnd_mod_bset(), otherwise all bit will be cleared.
Thanks Shimoda-san

Reported-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2016-10-26 17:46:17 +01:00
Kuninori Morimoto
bb7927c793 ASoC: rsnd: rsnd_reg cleanup for SSIU
R-Car Gen1 didn't have SSIU IP, and it was part of SRU.
In Gen2, SSIU was created and it has original register.
Let's cleanup rsnd_reg for SSIU, because this driver
doesn't support Gen1 SRU any more.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2016-10-26 17:46:17 +01:00
Kuninori Morimoto
f0b20e7120 ASoC: rsnd: remove "Gen2 only" comment
Gen1 support had been removed. "Gen2 only" comment is
no longer needed.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2016-10-26 17:46:17 +01:00
Bartlomiej Zolnierkiewicz
bc9c6cc857 arm: spitz_defconfig: convert to use libata PATA drivers
IDE subsystem has been deprecated since 2009 and the majority
(if not all) of Linux distributions have switched to use
libata for ATA support exclusively.  However there are still
some users (mostly old or/and embedded non-x86 systems) that
have not converted from using IDE subsystem to libata PATA
drivers.  This doesn't seem to be good thing in the long-term
for Linux as while there is less and less PATA systems left
in use:

* testing efforts are divided between two subsystems

* having duplicate drivers for same hardware confuses users

This patch converts spitz_defconfig to use libata PATA
drivers.

Cc: Daniel Mack <daniel@zonque.org>
Cc: Haojian Zhuang <haojian.zhuang@gmail.com>
Cc: Robert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
2016-10-26 18:43:33 +02:00
Bartlomiej Zolnierkiewicz
cc81123ee1 arm: s3c2410_defconfig: convert to use libata PATA drivers
IDE subsystem has been deprecated since 2009 and the majority
(if not all) of Linux distributions have switched to use
libata for ATA support exclusively.  However there are still
some users (mostly old or/and embedded non-x86 systems) that
have not converted from using IDE subsystem to libata PATA
drivers.  This doesn't seem to be good thing in the long-term
for Linux as while there is less and less PATA systems left
in use:

* testing efforts are divided between two subsystems

* having duplicate drivers for same hardware confuses users

This patch converts s3c2410_defconfig to use libata PATA
drivers.

Cc: Kukjin Kim <kgene@kernel.org>
Cc: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Cc: linux-samsung-soc@vger.kernel.org
Cc: Ben Dooks <ben.dooks@codethink.co.uk>
Cc: Vincent Sanders <vince@simtec.co.uk>
Cc: Simtec Linux Team <linux@simtec.co.uk>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
2016-10-26 18:43:33 +02:00
Bartlomiej Zolnierkiewicz
4289ab7ad6 arm: netwinder_defconfig: convert to use libata PATA drivers
IDE subsystem has been deprecated since 2009 and the majority
(if not all) of Linux distributions have switched to use
libata for ATA support exclusively.  However there are still
some users (mostly old or/and embedded non-x86 systems) that
have not converted from using IDE subsystem to libata PATA
drivers.  This doesn't seem to be good thing in the long-term
for Linux as while there is less and less PATA systems left
in use:

* testing efforts are divided between two subsystems

* having duplicate drivers for same hardware confuses users

This patch converts netwinder_defconfig to use libata PATA
drivers.

Cc: Russell King <linux@arm.linux.org.uk>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
2016-10-26 18:43:33 +02:00