Commit graph

661,541 commits

Author SHA1 Message Date
Charles Keepax
88f0e3a5e6 regulator: arizona-ldo1: Set appropriate value for ramp_delay
Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2016-10-24 17:43:05 +01:00
Charles Keepax
ae1ea48c5c ASoC: arizona: Add gating for source clocks of the FLLs
Whilst ultimately we would like to move all the clocking over to the
clock framework, as an intermediate step to get people going for now
enable the source clocks for FLLs as they are powered up.

Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Tested-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2016-10-24 17:42:43 +01:00
Charles Keepax
7a4413d0dc ASoC: arizona: Add gating for clock when used for direct MCLK
Whilst ultimately we would like to move all the clocking over to the
clock framework, as an intermediate step to get people going for now
gating the source clocks for SYSCLK/ASYNCCLK when they are configured
to come directly from an MCLK pin.

Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Tested-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2016-10-24 17:42:43 +01:00
Vineet Gupta
cf986d4702 ARCv2: IOC: use @ioc_enable not @ioc_exist where intended
if user disables IOC from debugger at startup (by clearing @ioc_enable),
@ioc_exists is cleared too. This means boot prints don't capture the
fact that IOC was present but disabled which could be misleading.

So invert how we use @ioc_enable and @ioc_exists and make it more
canonical. @ioc_exists represent whether hardware is present or not and
stays same whether enabled or not. @ioc_enable is still user driven,
but will be auto-disabled if IOC hardware is not present, i.e. if
@ioc_exist=0. This is opposite to what we were doing before, but much
clearer.

This means @ioc_enable is now the "exported" toggle in rest of code such
as dma mapping API.

Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2016-10-24 09:24:47 -07:00
Vineet Gupta
91e040a79d ARC: syscall for userspace cmpxchg assist
Older ARC700 cores (ARC750 specifically) lack instructions to implement
atomic r-w-w. This is problematic for userspace libraries such as NPTL
which need atomic primitives. So enable them by providing kernel assist.
This is costly but really the only sane soluton (othern than tight
spinning using the otherwise availiable atomic exchange EX instruciton).

Good thing is there are only a few of these cores running Linux out in
the wild.

This only works on UP systems.

Reviewed-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2016-10-24 09:24:26 -07:00
Wang Xiaoguang
9d1032cc49 btrfs: fix WARNING in btrfs_select_ref_head()
This issue was found when testing in-band dedupe enospc behaviour,
sometimes run_one_delayed_ref() may fail for enospc reason, then
__btrfs_run_delayed_refs()will return, but forget to add num_heads_read
back, which will trigger "WARN_ON(delayed_refs->num_heads_ready == 0)" in
btrfs_select_ref_head().

Signed-off-by: Wang Xiaoguang <wangxg.fnst@cn.fujitsu.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2016-10-24 18:20:29 +02:00
Dan Carpenter
9c894696f5 Btrfs: remove some no-op casts
We cast 0 to a u8 but then because of type promotion, it's immediately
cast to int back to int before we do a bitwise negate.  The cast doesn't
matter in this case, the code works as intended.  It causes a static
checker warning though so let's remove it.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2016-10-24 18:20:29 +02:00
Wang Xiaoguang
dd4b857aab btrfs: pass correct args to btrfs_async_run_delayed_refs()
In btrfs_truncate_inode_items()->btrfs_async_run_delayed_refs(), we
swap the arg2 and arg3 wrongly, fix this.

This bug just impacts asynchronous delayed refs handle when we truncate inodes.
In delayed_ref_async_start(), there is such codes:

    trans = btrfs_join_transaction(async->root);
    if (trans->transid > async->transid)
        goto end;
    ret = btrfs_run_delayed_refs(trans, async->root, async->count);

From this codes, we can see that this just influence whether can we handle
delayed refs or the number of delayed refs to handle, this may impact
performance, but will not result in missing delayed refs, all delayed refs will
be handled in btrfs_commit_transaction().

Signed-off-by: Wang Xiaoguang <wangxg.fnst@cn.fujitsu.com>
Reviewed-by: Holger Hoffstätte <holger@applied-asynchrony.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2016-10-24 18:20:29 +02:00
Wang Xiaoguang
69ae5e4459 btrfs: make file clone aware of fatal signals
Indeed this just make the behavior similar to xfs when process has
fatal signals pending, and it'll make fstests/generic/298 happy.

Signed-off-by: Wang Xiaoguang <wangxg.fnst@cn.fujitsu.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2016-10-24 18:20:29 +02:00
Goldwyn Rodrigues
0b34c261e2 btrfs: qgroup: Prevent qgroup->reserved from going subzero
While free'ing qgroup->reserved resources, we much check if
the page has not been invalidated by a truncate operation
by checking if the page is still dirty before reducing the
qgroup resources. Resources in such a case are free'd when
the entire extent is released by delayed_ref.

This fixes a double accounting while releasing resources
in case of truncating a file, reproduced by the following testcase.

SCRATCH_DEV=/dev/vdb
SCRATCH_MNT=/mnt
mkfs.btrfs -f $SCRATCH_DEV
mount -t btrfs $SCRATCH_DEV $SCRATCH_MNT
cd $SCRATCH_MNT
btrfs quota enable $SCRATCH_MNT
btrfs subvolume create a
btrfs qgroup limit 500m a $SCRATCH_MNT
sync
for c in {1..15}; do
dd if=/dev/zero  bs=1M count=40 of=$SCRATCH_MNT/a/file;
done

sleep 10
sync
sleep 5

touch $SCRATCH_MNT/a/newfile

echo "Removing file"
rm $SCRATCH_MNT/a/file

Fixes: b9d0b38928 ("btrfs: Add handler for invalidate page")
Signed-off-by: Goldwyn Rodrigues <rgoldwyn@suse.com>
Reviewed-by: Qu Wenruo <quwenruo@cn.fujitsu.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2016-10-24 18:20:21 +02:00
Benjamin Coddington
86a6c211d6 NFS: Trim extra slash in v4 nfs_path
A NFSv4 mount of a subdirectory will show an extra slash (as in
'server://path') in proc's mountinfo which will not match the device name
and path.  This can cause problems for programs searching for the mount.
Fix this by checking for a leading slash in the dentry path, if so trim
away any trailing slashes in the device name.

Signed-off-by: Benjamin Coddington <bcodding@redhat.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2016-10-24 12:06:01 -04:00
CIJOML CIJOMLovic
37e7856827 [media] Add support for EVOLVEO XtraTV stick
Add a new USB ID for EVOLVEO XtraTV stick.

[mchehab@s-opensource.org: fix patch and make checkpatch happy]
Cc: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2016-10-24 13:49:30 -02:00
Aidan Thornton
a98b69002a USB: serial: ch341: add debug output for chip version
Will probably be helpful if there are any more compatibility issues.

Signed-off-by: Aidan Thornton <makosoft@gmail.com>
Reviewed-by: Grigori Goronzy <greg@chown.ath.cx>
Signed-off-by: Johan Hovold <johan@kernel.org>
2016-10-24 17:41:30 +02:00
Aidan Thornton
ba781bdf86 USB: serial: ch341: add support for parity, frame length, stop bits
With the new reinitialization method, configuring parity, different
frame lengths and different stop bit settings should work as expected
on both CH340G and CH341A. Tested on a loopback-connected CH340G
with a logic analyzer in a number of different configurations.

Based on a patch by Grigori Goronzy

Signed-off-by: Aidan Thornton <makosoft@gmail.com>
Reviewed-by: Grigori Goronzy <greg@chown.ath.cx>
Signed-off-by: Johan Hovold <johan@kernel.org>
2016-10-24 17:41:25 +02:00
Aidan Thornton
4e46c410e0 USB: serial: ch341: reinitialize chip on reconfiguration
Changing the LCR register after initialization does not seem to be reliable
on all chips (particularly not on CH341A). Restructure initialization and
configuration to always reinit the chip on configuration changes instead and
pass the LCR register value directly to the initialization command.

(Note that baud rates above 500kbaud are incorrect, but they're incorrect in
the same way both before and after this patch at least on the CH340G. Fixing
this isn't a priority as higher baud rates don't seem that reliable anyway.)

Cleaned-up version of a patch by Grigori Goronzy

Signed-off-by: Aidan Thornton <makosoft@gmail.com>
Reviewed-by: Grigori Goronzy <greg@chown.ath.cx>
Signed-off-by: Johan Hovold <johan@kernel.org>
2016-10-24 17:41:19 +02:00
Aidan Thornton
6fde8d29b0 USB: serial: ch341: add register and USB request definitions
No functional changes, this just gives names to some registers and USB
requests based on Grigori Goronzy's work and WinChipTech's Linux driver
(which reassuringly agree), then uses them in place of magic numbers.
This also renames the misnamed BREAK2 register (actually UART config)

Signed-off-by: Aidan Thornton <makosoft@gmail.com>
Reviewed-by: Grigori Goronzy <greg@chown.ath.cx>
Signed-off-by: Johan Hovold <johan@kernel.org>
2016-10-24 17:41:07 +02:00
tang.junhui
dafa724bf5 dm table: fix missing dm_put_target_type() in dm_table_add_target()
dm_get_target_type() was previously called so any error returned from
dm_table_add_target() must first call dm_put_target_type().  Otherwise
the DM target module's reference count will leak and the associated
kernel module will be unable to be removed.

Also, leverage the fact that r is already -EINVAL and remove an extra
newline.

Fixes: 36a0456 ("dm table: add immutable feature")
Fixes: cc6cbe1 ("dm table: add always writeable feature")
Fixes: 3791e2f ("dm table: add singleton feature")
Cc: stable@vger.kernel.org # 3.2+
Signed-off-by: tang.junhui <tang.junhui@zte.com.cn>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2016-10-24 11:17:46 -04:00
Henrik Ingo
e950267ab8 [media] uvcvideo: uvc_scan_fallback() for webcams with broken chain
Some devices have invalid baSourceID references, causing uvc_scan_chain()
to fail, but if we just take the entities we can find and put them
together in the most sensible chain we can think of, turns out they do
work anyway. Note: This heuristic assumes there is a single chain.

At the time of writing, devices known to have such a broken chain are
  - Acer Integrated Camera (5986:055a)
  - Realtek rtl157a7 (0bda:57a7)

Signed-off-by: Henrik Ingo <henrik.ingo@avoinelama.fi>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2016-10-24 13:12:49 -02:00
Kuninori Morimoto
57619b4c93 ASoC: remove component from snd_soc_pcm_runtime
commit f2ed6b0764 ("ASoC: Make aux_dev more like a generic component")
removed its usecase. No one is using it now.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2016-10-24 16:11:57 +01:00
Kuninori Morimoto
39b2238e2c ASoC: bunch up bit field for snd_soc_dai
We can reduce struct size in certain environment.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2016-10-24 16:11:42 +01:00
Kuninori Morimoto
a7df0d3b45 ASoC: bunch up bit field for snd_soc_pcm_runtime
We can reduce struct size in certain environment.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2016-10-24 16:11:42 +01:00
Kuninori Morimoto
1236fa1e3c ASoC: soc.h: use bit field for playback/capture_only
Current snd_soc_dai_link is already using many bit fields.
Let's use it for playback_only/capture_only too.
We can reduce struct size in certain environment.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2016-10-24 16:11:42 +01:00
Wei Yongjun
4690481060 ASoC: Intel: Atom: add terminate entry for dmi_system_id tables
Make sure dmi_system_id tables are NULL terminated.

Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2016-10-24 16:10:54 +01:00
Wei Yongjun
2e9c079ccc spi: omap2-mcspi: Remove redundant return value check of platform_get_resource()
Remove unneeded error handling on the result of a call
to platform_get_resource() when the value is passed to
devm_ioremap_resource().

Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2016-10-24 16:08:30 +01:00
Jan Beulich
c251f15c7d xenbus: check return value of xenbus_scanf()
Don't ignore errors here: Set backend state to unknown when
unsuccessful.

Signed-off-by: Jan Beulich <jbeulich@suse.com>
Signed-off-by: David Vrabel <david.vrabel@citrix.com>
2016-10-24 16:08:21 +01:00
Jan Beulich
e1e5b3ff41 xenbus: prefer list_for_each()
This is more efficient than list_for_each_safe() when list modification
is accompanied by breaking out of the loop.

Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Signed-off-by: David Vrabel <david.vrabel@citrix.com>
2016-10-24 16:08:04 +01:00
Bard Liao
f515c3834a ASoC: rt298: fix jack type detect error
rt298_jack_detect may be called before card is instantiated. And
snd_soc_dapm_force_enable_pin will not work in that case. So, update
bit manually by regmap_update_bits.

Signed-off-by: Bard Liao <bardliao@realtek.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2016-10-24 16:03:00 +01:00
Wei Yongjun
26c1ec2fe4 dlm: fix error return code in sctp_accept_from_sock()
Fix to return a negative error code from the error handling
case instead of 0, as done elsewhere in this function.

Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Signed-off-by: David Teigland <teigland@redhat.com>
2016-10-24 10:01:51 -05:00
Arnd Bergmann
cb5f7e7c1d x86: xen: move cpu_up functions out of ifdef
Three newly introduced functions are not defined when CONFIG_XEN_PVHVM is
disabled, but are still being used:

arch/x86/xen/enlighten.c:141:12: warning: ‘xen_cpu_up_prepare’ used but never defined
arch/x86/xen/enlighten.c:142:12: warning: ‘xen_cpu_up_online’ used but never defined
arch/x86/xen/enlighten.c:143:12: warning: ‘xen_cpu_dead’ used but never defined

Fixes: 4d737042d6 ("xen/x86: Convert to hotplug state machine")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: David Vrabel <david.vrabel@citrix.com>
2016-10-24 15:49:07 +01:00
Juergen Gross
44b3c7af02 xenbus: advertise control feature flags
The Xen docs specify several flags which a guest can set to advertise
which values of the xenstore control/shutdown key it will recognize.
This patch adds code to write all the relevant feature-flag keys.

Based-on-patch-by: Paul Durrant <paul.durrant@citrix.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: David Vrabel <david.vrabel@citrix.com>
Reviewed-by: Paul Durrant <paul.durrant@citrix.com>
Signed-off-by: David Vrabel <david.vrabel@citrix.com>
2016-10-24 15:48:40 +01:00
Linus Walleij
54e2602f04 Merge branch 'ib-sx150x' of /home/linus/linux-pinctrl into devel 2016-10-24 16:33:34 +02:00
Sascha Hauer
f08ea3cc94 gpio: mxs: fix duplicate level interrupts
According to the reference manual level interrupts can't be acked
using the IRQSTAT registers. The effect is that when a level interrupt
triggers the following ack is a no-op and the same interrupt triggers
again right after it has been unmasked after running the interrupt
handler.

The reference manual says:

Status bits for pins configured as level sensitive interrupts cannot be
cleared unless either the actual pin is in the non-interrupting state, or
the pin has been disabled as an interrupt source by clearing its bit in
HW_PINCTRL_PIN2IRQ.

To work around the duplicated interrupts we can use the PIN2IRQ
rather than the IRQEN registers to mask the interrupts. This
probably does not work for the edge interrupts, so we have to split up
the irq chip into two chip types, one for the level interrupts and
one for the edge interrupts. We now make use of two different enable
registers, so we have to take care to always enable the right one,
especially during switching of the interrupt type. An easy way
to accomplish this is to use the IRQCHIP_SET_TYPE_MASKED which
makes sure that set_irq_type is called with masked interrupts. With this
the flow to change the irq type is like:

- core masks interrupt (using the current chip type)
- mxs_gpio_set_irq_type() changes chip type if necessary
- mxs_gpio_set_irq_type() unconditionally sets the enable bit in the
  now unused enable register
- core eventually unmasks the interrupt (using the new chip type)

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Reviewed-by: Marek Vasut <marex@denx.de>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-10-24 16:33:11 +02:00
Sascha Hauer
66a37c3bbf gpio: mxs: use enable/disable regs to (un)mask irqs
The mxs gpio controller does not only have a mask register to mask
interrupts, but also enable/disable registers. Use the enable/disable
registers rather than the mask register. This does not have any
advantage for now, but makes the next patch simpler.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Reviewed-by: Marek Vasut <marex@denx.de>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-10-24 16:33:11 +02:00
Mika Westerberg
4035cc15b9 ACPI / gpio: Add support for naming GPIOs
Now that we have the new helper function that sets nice names for GPIO
lines based on "gpio-line-names" device property, we can take advantage of
this in acpi_gpiochip_add().

Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-10-24 16:33:11 +02:00
Mika Westerberg
9427ecbed4 gpio: Rework of_gpiochip_set_names() to use device property accessors
In order to use "gpio-line-names" property in systems not having DT as
their boot firmware, rework of_gpiochip_set_names() to use device property
accessors. This reworked function is placed in a separate file making it
clear it deals with universal device properties.

Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-10-24 16:33:11 +02:00
Mika Westerberg
c80f1ba75d ACPI / gpio: Add hogging support
GPIO hogging means that the GPIO controller can "hog" and configure certain
GPIOs without need for a driver or userspace to do that. This is useful in
open-connected boards where BIOS cannot possibly know beforehand which
devices will be connected to the board.

This adds GPIO hogging mechanism to ACPI analogous to Device Tree.

Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-10-24 16:33:11 +02:00
Mika Westerberg
6f7194a10b ACPI / gpio: Allow holes in list of GPIOs for a device
Make it possible to have an empty GPIOs in a GPIO list for device. For
example a SPI master may use both GPIOs and native pins as chip selects and
we need to be able to distinguish between the two.

This makes it mandatory to have exactly 3 arguments for GPIOs and then
converts gpiolib to use of __acpi_node_get_property_reference() instead. In
addition we make acpi_gpio_package_count() to handle holes as well (this
matches the DT version).

Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-10-24 16:33:11 +02:00
Marek Vasut
1208c93525 gpio: pca953x: Add MAX7318 compatible
Add compatible string for the MAX7318 part. This is a two bank,
16 lines, I2C GPIO expander with interrupt line.

Signed-off-by: Marek Vasut <marex@denx.de>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-10-24 16:33:11 +02:00
Jean Delvare
4c5f15b71b gpio: ts4900: Add hardware dependencies
All the boards supported by the gpio-ts4900 driver are i.MX6 boards,
so only offer the driver for building on this platform, unless
build-testing.

Signed-off-by: Jean Delvare <jdelvare@suse.de>
Cc: Lucile Quirion <lucile.quirion@savoirfairelinux.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-10-24 16:33:11 +02:00
Bamvor Jian Zhang
74100bb967 tools/gpio: re-work gpio hammer with gpio operations
Signed-off-by: Bamvor Jian Zhang <bamvor.zhangjian@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-10-24 16:33:11 +02:00
Bamvor Jian Zhang
e1acec0e75 tools/gpio: add gpio basic opereations
Add basic gpio operations. User could get/set gpio value for specific
line of gpiochip.

Reference "tools/gpio/gpio-hammer.c" or
"tools/testing/selftest/gpio/gpio-mockup-chardev.c" for how to use it.

Signed-off-by: Bamvor Jian Zhang <bamvor.zhangjian@linaro.org>
Reviewed-by: Michael Welling <mwelling@ieee.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-10-24 16:33:11 +02:00
Thor Thayer
26a48c4cc2 gpio: altera-a10sr: Add A10 System Resource Chip GPIO support.
Add the GPIO functionality for the Altera Arria10 MAX5 System Resource
Chip. The A10 MAX5 has 12 bits of GPIO assigned to switches, buttons,
and LEDs as a GPIO extender on the SPI bus.

Signed-off-by: Thor Thayer <tthayer@opensource.altera.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>i
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-10-24 16:33:11 +02:00
Andy Shevchenko
e78ade0a2f gpio: merrifield: set default handler to be handle_bad_irq()
We switch the default handler to be handle_bad_irq() instead of
handle_simple_irq() (which was not correct anyway).

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-10-24 16:33:11 +02:00
Axel Lin
fdf4332fde gpio: max77620: Remove unused fields from struct max77620_gpio
Current code does not use gpio_irq/irq_base/gpio_base fields from
struct max77620_gpio, so remove them.

Signed-off-by: Axel Lin <axel.lin@ingics.com>
Acked-by: Laxman Dewangan <ldewangan@nvidia.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-10-24 16:33:11 +02:00
Anthony Best
08bcd3edec gpio: fix struct gpio_chip comment
It should have been @reg_clr instead of @reg_clk

Signed-off-by: Anthony Best <anthonybest@bestanthony.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-10-24 16:33:11 +02:00
Linus Walleij
ecdd1b890d Merge branch 'ib-sx150x' into devel 2016-10-24 16:30:55 +02:00
Neil Armstrong
9e80f9064e pinctrl: Add SX150X GPIO Extender Pinctrl Driver
Since the I2C sx150x GPIO expander driver uses platform_data to manage
the pins configurations, rewrite the driver as a pinctrl driver using
pinconf to get/set pin configurations from DT or debugfs.

The pinctrl driver is functionnally equivalent as the gpio-only driver
and can use DT for pinconf. The platform_data confirmation is dropped.

This patchset removed the gpio-only driver and selects the Pinctrl driver
config instead. This patchset also migrates the gpio dt-bindings to pinctrl
and add the pinctrl optional properties.

The driver was tested with a SX1509 device on a BeagleBone black with
interrupt support and on an X86_64 machine over an I2C to USB converter.

This is a fixed version that builds and runs on non-OF platforms and on
arm based OF. The GPIO version is removed and the bindings are also moved
to the pinctrl bindings.

Changes since v2
 - rebased on v4.9-rc1
 - removed MODULE_DEVICE_TABLE as in upstream bb411e771b
   ("gpio: sx150x: fix implicit assumption module.h is present")

Changes since v1
 - Fix Kconfig descriptions on pinctrl and gpio
 - Fix Kconfig dependency
 - Remove oscio support for non-789 devices
 - correct typo in dt bindings
 - remove probe reset for non-789 devices

Changes since RFC
 - Put #ifdef CONFIG_OF/CONFIG_OF_GPIO to remove OF code for non-of platforms
 - No more rely on OF_GPIO config
 - Moved and enhanced bindings to pinctrl bindings
 - Removed gpio-sx150x.c
 - Temporary select PINCTRL_SX150X when GPIO_SX150X
 - Temporary mark GPIO_SX150X as deprecated

Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Tested-by: Peter Rosin <peda@axentia.se>
Acked-by: Rob Herring <robh@kernel.org>
ested-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-10-24 16:30:40 +02:00
Maxime Ripard
dfdad68ff4 pinctrl: sunxi: Deprecate sunxi pinctrl bindings
The generic pin configuration and multiplexing should be preferred now,
even though we still support the old one.

Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Acked-by: Chen-Yu Tsai <wens@csie.org>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-10-24 16:30:14 +02:00
Maxime Ripard
cefbf1a1b2 pinctrl: sunxi: Support generic binding
Our bindings are mostly irrelevant now that we have generic pinctrl
bindings that cover exactly the same uses cases.

Add support for the new ones, and obviously keep our old binding support in
order to keep the ABI stable.

Acked-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-10-24 16:30:14 +02:00
Neil Armstrong
f0a8548bc1 dt-bindings: oxnas: Update Pinctrl and GPIO for OX820 Support
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-10-24 16:30:14 +02:00