Commit graph

661,541 commits

Author SHA1 Message Date
Andrey Smirnov
fa8d20c8db ARM: dts: vfxxx: Add node corresponding to OCOTP
Add node corresponding to OCOTP IP block.

Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2016-10-24 16:47:49 +08:00
Andrey Smirnov
227802b18d ARM: dts: vf610-zii-dev-rev-b: Remove I2C3
I2C3 bus was only brought out in revision A1 of the board and revision
B1 only brings out 3 I2C busses (I2C0, I2C1 and I2C2).

Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2016-10-24 16:47:49 +08:00
Jagan Teki
49bc67b61c ARM: dts: imx6qdl-wandboard-revb: Fix "ERROR: trailing whitespace"
Fixed error in trailing whitespace in wandboard-rev1 dtsi.

Signed-off-by: Jagan Teki <jteki@openedev.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2016-10-24 16:47:46 +08:00
Jagan Teki
bf5393c5ec ARM: dts: imx6qdl: Fix "ERROR: code indent should use tabs where possible"
Fixed code indent tabs in respetcive imx6qdl dtsi files.

Signed-off-by: Jagan Teki <jteki@openedev.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2016-10-24 16:47:42 +08:00
Jagan Teki
05c183e44b ARM: dts: imx6qdl: Fix "WARNING: please, no space before tabs"
Fixed no space before tabs warnings in respetcive imx6qdl dtsi files.

Signed-off-by: Jagan Teki <jteki@openedev.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2016-10-24 16:47:37 +08:00
Paul Gortmaker
cdd24f76fe reset: lpc18xx: make it explicitly non-modular
The Kconfig currently controlling compilation of this code is:

drivers/reset/Kconfig:config RESET_LPC18XX
drivers/reset/Kconfig:  bool "LPC18xx/43xx Reset Driver" if COMPILE_TEST
drivers/reset/Kconfig:  default ARCH_LPC18XX

or

arch/arm/Kconfig:config ARCH_LPC18XX
arch/arm/Kconfig:       bool "NXP LPC18xx/LPC43xx"

...meaning that it currently is not being built as a module by anyone.

Lets remove the modular code that is essentially orphaned, so that
when reading the driver there is no doubt it is builtin-only.

We explicitly disallow a driver unbind, since that doesn't have a
sensible use case anyway, and it allows us to drop the ".remove"
code for non-modular drivers.

Since module_platform_driver() uses the same init level priority as
builtin_platform_driver() the init ordering remains unchanged with
this commit.

Also note that MODULE_DEVICE_TABLE is a no-op for non-modular code.

We also delete the MODULE_LICENSE tag etc. since all that information
is already contained at the top of the file in the comments.

Cc: Joachim Eastwood <manabian@gmail.com>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2016-10-24 10:45:38 +02:00
Paul Gortmaker
fadb03cd46 reset: zynq: make it explicitly non-modular
The Makefile/Kconfig currently controlling compilation of this code is:

drivers/reset/Kconfig:config RESET_ZYNQ
drivers/reset/Kconfig:  bool "ZYNQ Reset Driver" if COMPILE_TEST
drivers/reset/Kconfig:  default ARCH_ZYNQ

or

drivers/reset/Makefile:obj-$(CONFIG_ARCH_ZYNQ) += reset-zynq.o
arch/arm/mach-zynq/Kconfig:config ARCH_ZYNQ
arch/arm/mach-zynq/Kconfig:     bool "Xilinx Zynq ARM Cortex A9 Platform" if ARCH_MULTI_V7

...meaning that it currently is not being built as a module by anyone.

Lets remove the few remaining traces of modular macro usage, so that
when reading the driver there is no doubt it is builtin-only.

Since module_platform_driver() uses the same init level priority as
builtin_platform_driver() the init ordering remains unchanged with
this commit.

We also delete the MODULE_LICENSE tag etc. since all that information
was (or is now) contained at the top of the file in the comments.

Cc: "Sören Brinkmann" <soren.brinkmann@xilinx.com>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Acked-by: Michal Simek <michal.simek@xilinx.com>
Acked-by: Moritz Fischer <moritz.fischer@ettus.com>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2016-10-24 10:45:32 +02:00
Paul Gortmaker
c4742ed32b reset: sunxi: make it explicitly non-modular
The Kconfig currently controlling compilation of this code is:

drivers/reset/Kconfig:config RESET_SUNXI
drivers/reset/Kconfig:  bool "Allwinner SoCs Reset Driver" if COMPILE_TEST && !ARCH_SUNXI
drivers/reset/Kconfig:  default ARCH_SUNXI

or

arch/arm/mach-sunxi/Kconfig:menuconfig ARCH_SUNXI
arch/arm/mach-sunxi/Kconfig:    bool "Allwinner SoCs" if ARCH_MULTI_V7

...meaning that it currently is not being built as a module by anyone.

Lets remove the few remaining traces of modular macro usage, so that
when reading the driver there is no doubt it is builtin-only.

Since module_platform_driver() uses the same init level priority as
builtin_platform_driver() the init ordering remains unchanged with
this commit.

Also note that MODULE_DEVICE_TABLE is a no-op for non-modular code.

We also delete the MODULE_LICENSE tag etc. since all that information
is already contained at the top of the file in the comments.

Cc: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2016-10-24 10:45:31 +02:00
Paul Gortmaker
02163199be reset: socfpga: make it explicitly non-modular
The Kconfig currently controlling compilation of this code is:

drivers/reset/Kconfig:config RESET_SOCFPGA
drivers/reset/Kconfig:  bool "SoCFPGA Reset Driver" if COMPILE_TEST
drivers/reset/Kconfig:  default ARCH_SOCFPGA

or

arch/arm/mach-socfpga/Kconfig:menuconfig ARCH_SOCFPGA
arch/arm/mach-socfpga/Kconfig:  bool "Altera SOCFPGA family" if ARCH_MULTI_V7

...meaning that it currently is not being built as a module by anyone.

Lets remove the small amount of modular evidence that remains, so that
when reading the driver there is no doubt it is builtin-only.

Since module_platform_driver() uses the same init level priority as
builtin_platform_driver() the init ordering remains unchanged with
this commit.

We also delete the MODULE_LICENSE tag etc. since all that information
was (or is now) contained at the top of the file in the comments.

Cc: Steffen Trumtrar <s.trumtrar@pengutronix.de>
Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2016-10-24 10:45:27 +02:00
Paul Gortmaker
ed4dba99ca reset: berlin: make it explicitly non-modular
The Kconfig currently controlling compilation of this code is:

drivers/reset/Kconfig:config RESET_BERLIN
drivers/reset/Kconfig:  bool "Berlin Reset Driver" if COMPILE_TEST
drivers/reset/Kconfig:  default ARCH_BERLIN

or

arch/arm/mach-berlin/Kconfig:menuconfig ARCH_BERLIN
arch/arm/mach-berlin/Kconfig:   bool "Marvell Berlin SoCs" if ARCH_MULTI_V7

or

arch/arm64/Kconfig.platforms:config ARCH_BERLIN
arch/arm64/Kconfig.platforms:   bool "Marvell Berlin SoC Family"

...meaning that it currently is not being built as a module by anyone.

Lets remove the modular code that is essentially orphaned, so that
when reading the driver there is no doubt it is builtin-only.

Since module_platform_driver() uses the same init level priority as
builtin_platform_driver() the init ordering remains unchanged with
this commit.

Also note that MODULE_DEVICE_TABLE is a no-op for non-modular code.

We also delete the MODULE_LICENSE tag etc. since all that information
was (or is now) contained at the top of the file in the comments.

Cc: Antoine Tenart <antoine.tenart@free-electrons.com>
Cc: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2016-10-24 10:43:40 +02:00
Paul Mackerras
09b7e37b18 powerpc/64: Fix race condition in setting lock bit in idle/wakeup code
This fixes a race condition where one thread that is entering or
leaving a power-saving state can inadvertently ignore the lock bit
that was set by another thread, and potentially also clear it.
The core_idle_lock_held function is called when the lock bit is
seen to be set.  It polls the lock bit until it is clear, then
does a lwarx to load the word containing the lock bit and thread
idle bits so it can be updated.  However, it is possible that the
value loaded with the lwarx has the lock bit set, even though an
immediately preceding lwz loaded a value with the lock bit clear.
If this happens then we go ahead and update the word despite the
lock bit being set, and when called from pnv_enter_arch207_idle_mode,
we will subsequently clear the lock bit.

No identifiable misbehaviour has been attributed to this race.

This fixes it by checking the lock bit in the value loaded by the
lwarx.  If it is set then we just go back and keep on polling.

Fixes: b32aadc1a8 ("powerpc/powernv: Fix race in updating core_idle_state")
Cc: stable@vger.kernel.org # v4.2+
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-10-24 19:29:47 +11:00
Paul Mackerras
56c46222af powerpc/64: Re-fix race condition between going idle and entering guest
Commit 8117ac6a6c ("powerpc/powernv: Switch off MMU before entering
nap/sleep/rvwinkle mode", 2014-12-10) fixed a race condition where one
thread entering a KVM guest could switch the MMU context to the guest
while another thread was still in host kernel context with the MMU on.
That commit moved the point where a thread entering a power-saving
mode set its kvm_hstate.hwthread_state field in its PACA to
KVM_HWTHREAD_IN_IDLE from a point where the MMU was on to after the
MMU had been switched off.  That commit also added a comment
explaining that we have to switch to real mode before setting
hwthread_state to avoid this race.

Nevertheless, commit 4eae2c9ae5 ("powerpc/powernv: Make
pnv_powersave_common more generic", 2016-07-08) subsequently moved
the setting of hwthread_state back to a point where the MMU is on,
thus reintroducing the race, despite the comment saying that this
should not be done being included in full in the context lines of
the patch that did it.

This fixes the race again and adds a bigger and shoutier comment
explaining the potential race condition.

Fixes: 4eae2c9ae5 ("powerpc/powernv: Make pnv_powersave_common more generic")
Cc: stable@vger.kernel.org # v4.8+
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
Reviewed-by: Shreyas B. Prabhu <shreyasbp@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-10-24 19:29:36 +11:00
Gerald Schaefer
4a65429457 s390/mm: fix zone calculation in arch_add_memory()
Standby (hotplug) memory should be added to ZONE_MOVABLE on s390. After
commit 199071f1 "s390/mm: make arch_add_memory() NUMA aware",
arch_add_memory() used memblock_end_of_DRAM() to find out the end of
ZONE_NORMAL and the beginning of ZONE_MOVABLE. However, commit 7f36e3e5
"memory-hotplug: add hot-added memory ranges to memblock before allocate
node_data for a node." moved the call of memblock_add_node() before
the call of arch_add_memory() in add_memory_resource(), and thus changed
the return value of memblock_end_of_DRAM() when called in
arch_add_memory(). As a result, arch_add_memory() will think that all
memory blocks should be added to ZONE_NORMAL.

Fix this by changing the logic in arch_add_memory() so that it will
manually iterate over all zones of a given node to find out which zone
a memory block should be added to.

Reviewed-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Gerald Schaefer <gerald.schaefer@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2016-10-24 10:26:17 +02:00
Heiko Carstens
47ece7fef4 s390/dumpstack: use pr_cont within show_stack and die
Use pr_cont instead of printk calls also within show_stack and
die in order to avoid extra line breaks.

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2016-10-24 10:26:14 +02:00
Fabio Estevam
f9d1f7a7ad ARM: imx: gpc: Fix the imx_gpc_genpd_init() error path
If of_genpd_add_provider_onecell() fails the following kernel crash is
observed on a kernel built with multi_v7_defconfig:

[    1.739301] [00000040] *pgd=00000000
[    1.739310] Internal error: Oops: 5 [#1] SMP ARM
[    1.739319] Modules linked in:
[    1.739328] CPU: 1 PID: 95 Comm: kworker/1:4 Not tainted 4.8.0-11897-g6b5e09a #1
[    1.739331] Hardware name: Freescale i.MX6 Quad/DualLite (Device Tree)
[    1.739352] Workqueue: pm genpd_power_off_work_fn
[    1.739356] task: ee63d400 task.stack: ee70a000
[    1.739365] PC is at mutex_lock+0xc/0x4c
[    1.739374] LR is at regulator_disable+0x2c/0x60
[    1.739379] pc : [<c0bc0da0>]    lr : [<c06e4b10>]    psr: 60000013
[    1.739379] sp : ee70beb0  ip : 10624dd3  fp : ee6e6280
[    1.739382] r10: eefb0900  r9 : 00000000  r8 : c1309918
[    1.739385] r7 : 00000000  r6 : 00000040  r5 : 00000000  r4 : 00000040
[    1.739390] r3 : 0000004c  r2 : 7fffd540  r1 : 000001e4  r0 : 00000040

Instead of returning of_genpd_add_provider_onecell() directly,
we should check its return value and in the case of error we
should unwind the previously taken actions, which in these case are:
- Call imx6q_pm_pu_power_off()
- Set imx6q_pu_domain.reg back to NULL

Setting imx6q_pu_domain.reg to NULL in the error case is important
as it will prevent further operations in the pu_reg regulator.

This kernel crash is not observed with imx_v6_v7_defconfig because
it selects GPU and VPU drivers, which are consumers of the GPC block
and thus change the refcount of the pu_reg regulator.

Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2016-10-24 15:13:02 +08:00
Fabio Estevam
eef0b282bb ARM: imx: gpc: Initialize all power domains
Since commit 0159ec6707 ("PM / Domains: Verify the PM domain is present
when adding a provider") the following regression is observed on imx6:

imx-gpc: probe of 20dc000.gpc failed with error -22

The gpc probe fails because of_genpd_add_provider_onecell() now checks
if all the domains are initialized via pm_genpd_present() function
and it fails because not all the power domains are initialized.

In order to fix this error, initialize all the power domains from
imx_gpc_domains[], not only the imx6q_pu_domain.base one.

Reported-by: Olof's autobooter <build@lixom.net>
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2016-10-24 15:12:57 +08:00
Daniel Stone
2d2c5ad83f drm: i915: Wait for fences on new fb, not old
The previous code would wait for fences on the framebuffer from the old
plane state to complete, rather than the new, so you would see tearing
everywhere. Fix this to wait on the new state before we make it active.

Signed-off-by: Daniel Stone <daniels@collabora.com>
Fixes: 94f050246b ("drm/i915: nonblocking commit")
Cc: stable@vger.kernel.org
Cc: Daniel Vetter <daniel.vetter@intel.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20161021144454.6288-1-daniels@collabora.com
2016-10-24 09:02:58 +02:00
Daniel Vetter
9558e74c26 drm/i915: Update DRIVER_DATE to 20161024
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2016-10-24 08:25:36 +02:00
Stephen Hemminger
7b889adbac doc: add missing docbook parameter for fence-array
Fixes 'make htmldocs' warning.

Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20161023093044.324edfb6@xeon-e3
2016-10-24 07:57:08 +02:00
Darrick J. Wong
b77428b12b xfs: defer should abort intent items if the trans roll fails
If the deferred ops transaction roll fails, we need to abort the intent
items if we haven't already logged a done item for it, regardless of
whether or not the deferred ops has had a transaction committed.  Dave
found this while running generic/388.

Move the tracepoint to make it easier to track object lifetimes.

Reported-by: Dave Chinner <david@fromorbit.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
2016-10-24 14:21:18 +11:00
Brian Foster
c17a8ef43d xfs: clear cowblocks tag when cow fork is emptied
The background cowblocks scan job takes care of scanning for inodes with
potentially lingering blocks in the cow fork and clearing them out. If
the background scanner reclaims the cow fork blocks, however, it doesn't
immediately clear the cowblocks tag from the inode. Instead, the inode
remains tagged until the background scanner comes around again,
discovers the inode cow fork has no blocks, clears the tag and fires the
trace_xfs_inode_free_cowblocks_invalid() tracepoint to indicate that the
inode may have been incorrectly tagged.

This is not a major functional problem as the tag is ultimately cleared.
Nonetheless, clear the tag when an inode cow fork is explicitly emptied
to avoid the extra round trip through the background scanner and
spurious "invalid" tracepoint.

Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
2016-10-24 14:21:08 +11:00
Brian Foster
7b7381f043 xfs: fix up inode cowblocks tracking tracepoints
These calls are still using the eofblocks tracepoints. The cowblocks
equivalents are already defined, we just aren't actually calling them.

Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
2016-10-24 14:21:00 +11:00
Jan Kara
c663e29f88 fs: Do to trim high file position bits in iomap_page_mkwrite_actor
iomap_page_mkwrite_actor() calls __block_write_begin_int() with position
masked as pos & ~PAGE_MASK which is equivalent to pos & (PAGE_SIZE-1).
Thus it masks off high bits of file position. However
__block_write_begin_int() expects full file position on input. This does
not cause any visible issues because all __block_write_begin_int()
really cares about are low file position bits but still it is a bug
waiting to happen.

Signed-off-by: Jan Kara <jack@suse.cz>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Dave Chinner <david@fromorbit.com>
2016-10-24 14:20:25 +11:00
Zhenyu Wang
946260e5fb drm/i915/gvt: Fix broken mocs offset
Fix missed mocs offset reg setting for save/restore function.

Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
2016-10-24 10:45:44 +08:00
Arkadiusz Hiler
1c860a306e drm/i915/gvt: Implement WaForceWakeRenderDuringMmioTLBInvalidate
When invalidating RCS TLB the device can enter RC6 state interrupting
the process, therefore the need for render forcewake for the whole
procedure.

This WA is needed for all production SKL SKUs.

v2: reworked putting and getting forcewake with help of Mika Kuoppala
v3: use I915_READ_FW and I915_WRITE_FW as we are handling forcewake on
    in the code path

References: HSD#2136899, HSD#1404391274
Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Cc: Zhenyu Wang <zhenyuw@linux.intel.com>
Signed-off-by: Arkadiusz Hiler <arkadiusz.hiler@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
2016-10-24 10:45:26 +08:00
Zhenyu Wang
7093f5ff75 drm/i915: GVT-g driver depends on 64BIT kernel
We currently don't support GVT-g driver on i386 kernel.
Add explicit dependence on 64bit kernel.

Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
2016-10-24 10:44:44 +08:00
Zhenyu Wang
d1bbef6d15 drm/i915/gvt: Fix failure when ACPI is not enabled
Directly use memremap instead of acpi function for opregion mapping.

Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
2016-10-24 10:43:47 +08:00
Vaibhav Jain
a05b82d514 cxl: Fix leaking pid refs in some error paths
In some error paths in functions cxl_start_context and
afu_ioctl_start_work pid references to the current & group-leader tasks
can leak after they are taken. This patch fixes these error paths to
release these pid references before exiting the error path.

Fixes: 7b8ad495d5 ("cxl: Fix DSI misses when the context owning task exits")
Cc: stable@vger.kernel.org # v4.5+
Reviewed-by: Andrew Donnellan <andrew.donnellan@au1.ibm.com>
Reported-by: Frederic Barrat <fbarrat@linux.vnet.ibm.com>
Signed-off-by: Vaibhav Jain <vaibhav@linux.vnet.ibm.com>
Acked-by: Frederic Barrat <fbarrat@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-10-24 11:38:27 +11:00
Liu Gang
d71cf15b86 gpio: mpc8xxx: Correct irq handler function
From the beginning of the gpio-mpc8xxx.c, the "handle_level_irq"
has being used to handle GPIO interrupts in the PowerPC/Layerscape
platforms. But actually, almost all PowerPC/Layerscape platforms
assert an interrupt request upon either a high-to-low change or
any change on the state of the signal.

So the "handle_level_irq" is not reasonable for PowerPC/Layerscape
GPIO interrupt, it should be "handle_edge_irq". Otherwise the system
may lost some interrupts from the PIN's state changes.

Signed-off-by: Liu Gang <Gang.Liu@nxp.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-10-24 02:20:40 +02:00
Linus Torvalds
07d9a38068 Linux 4.9-rc2 v4.9-rc2 2016-10-23 17:10:14 -07:00
Linus Torvalds
5ff93abc7a This pull requests contains fixes for issues in both UBI and UBIFS:
- Fallout from the merge window, refactoring UBI code introduced some issues.
 - Fixes for an UBIFS readdir bug which can cause getdents() to busy loop
   for ever and a bug in the UBIFS xattr code.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2
 
 iQIcBAABAgAGBQJYDMa5AAoJEEtJtSqsAOnWxKgP+wT4lCM9gP3/1FywhrJRxA4Z
 vH9YYWP6vjdYhZP8tt3RVIrJ/BxPMDx8+7IkZBzxVRQcnvaoaGibgEsfkGmTngyW
 2rFVqDuwFIDIWLvNrKW26ep4p1Ek8yZhIIcW4upHKtnaJpZwvn6BmwxRep1JeLuc
 yZjGIJtejRbvuuaVwEBu+Et3Rlflg5/D6oPWOJfYqwjJjxihkb4hfAgzJkLeBK3Q
 Qw65S8FxKDPa7vAj2+jor3Cq0ETg3b2cQR4+UnGmDat9RVMquS3dDTBzBn6TNZx+
 xw2aiOPi0JPMeEnJP+Z61/moeQhlLddZsEVdRQ5Ud6LcOeq6Rg7v5J+POkQ0hhIy
 DUfxHjnsmB4P9XqtaGGr74d8trjIm15cL6yAVKG/jMnb11oCWVDVyr0FmsXSmO7I
 O+b6P9hM7C3o+eAETdCLhd8Jg5isOm27WWQ2Bqq2FOjY9EmvTIFl+Imp+++3YHA6
 R6jlFfMbju0gCfyPZdDPmTc91CPtWdTze43bpIdl2N3L2/efG2I0xFjjlr+WWEkL
 htYQr+b3vjO+moTl8KvT7pmvVNPUtNljOZsHHJjrsBLvuMDb0+7X1Wy860klTOPp
 B7NntTqwBUF6HtPpeebHvEfBiTruyspGZfokvkud6rqPuO1DbsJrVNY7Lwh9XA8M
 iGn9LwwlNjQYiyZNx0GT
 =Gjo0
 -----END PGP SIGNATURE-----

Merge tag 'upstream-4.9-rc2' of git://git.infradead.org/linux-ubifs

Pull UBI[FS] fixes from Richard Weinberger:
 "This contains fixes for issues in both UBI and UBIFS:

   - Fallout from the merge window, refactoring UBI code introduced some
     issues.

   - Fixes for an UBIFS readdir bug which can cause getdents() to busy
     loop for ever and a bug in the UBIFS xattr code"

* tag 'upstream-4.9-rc2' of git://git.infradead.org/linux-ubifs:
  ubifs: Abort readdir upon error
  UBI: Fix crash in try_recover_peb()
  ubi: fix swapped arguments to call to ubi_alloc_aeb
  ubifs: Fix xattr_names length in exit paths
  ubifs: Rename ubifs_rename2
2016-10-23 16:58:55 -07:00
Linus Torvalds
c761923cb8 A few bug fixes and add some missing KERN_CONT annotations
-----BEGIN PGP SIGNATURE-----
 
 iQEcBAABCAAGBQJYDK6KAAoJEPL5WVaVDYGjhZ0H/2aLu4BQOmIPJZBBS+I2FurE
 7FFdnQ8r1gBPWktvfUTn6MzTE4VKe0b1js5EiRCiCJhJq9UadBu53dUWTgfZ5Egi
 Sc6p0NGqDRgixLXbFRt8wP7iPtVg0tlysE0EJ6ae4VA1wUpf5aoHaPqgO9V0hirW
 9pUJq8kzBGs628CROcYtQ5IL5AfouM1q/fzazw4Voz48LTgvhnDGCkqQmNsKkRo+
 bN5tkjSTQUdW3OrRVsNwNND/iDYpTa6PcX1XXQiFFhQ4SbZoNS/dzowz09QreGxA
 Uz/rt2hMnv552Zd52d5q6N/jPWg+O+x0b4PcYtn7NDjPn/1KZUyX0pQK/EoevXQ=
 =2Kri
 -----END PGP SIGNATURE-----

Merge tag 'ext4_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4

Pull ext4 fixes from Ted Ts'o:
 "A few bug fixes and add some missing KERN_CONT annotations"

* tag 'ext4_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
  ext4: add missing KERN_CONT to a few more debugging uses
  fscrypto: lock inode while setting encryption policy
  ext4: correct endianness conversion in __xattr_check_inode()
  fscrypto: make XTS tweak initialization endian-independent
  ext4: do not advertise encryption support when disabled
  jbd2: fix incorrect unlock on j_list_lock
  ext4: super.c: Update logging style using KERN_CONT
2016-10-23 16:52:19 -07:00
Linus Torvalds
a55da8a0dd Merge git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending
Pull SCSI target fixes from Nicholas Bellinger:
 "Here are the outstanding target-pending fixes for v4.9-rc2.

  This includes:

   - Fix v4.1.y+ reference leak regression with concurrent TMR
     ABORT_TASK + session shutdown. (Vaibhav Tandon)

   - Enable tcm_fc w/ SCF_USE_CPUID to avoid host exchange timeouts
     (Hannes)

   - target/user error sense handling fixes. (Andy + MNC + HCH)

   - Fix iscsi-target NOP_OUT error path iscsi_cmd descriptor leak
     (Varun)

   - Two EXTENDED_COPY SCSI status fixes for ESX VAAI (Dinesh Israni +
     Nixon Vincent)

   - Revert a v4.8 residual overflow change, that breaks sg_inq with
     small allocation lengths.

  There are a number of folks stress testing the v4.1.y regression fix
  in their environments, and more folks doing iser-target I/O stress
  testing atop recent v4.x.y code.

  There is also one v4.2.y+ RCU conversion regression related to
  explicit NodeACL configfs changes, that is still being tracked down"

* git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending:
  target/tcm_fc: use CPU affinity for responses
  target/tcm_fc: Update debugging statements to match libfc usage
  target/tcm_fc: return detailed error in ft_sess_create()
  target/tcm_fc: print command pointer in debug message
  target: fix potential race window in target_sess_cmd_list_waiting()
  Revert "target: Fix residual overflow handling in target_complete_cmd_with_length"
  target: Don't override EXTENDED_COPY xcopy_pt_cmd SCSI status code
  target: Make EXTENDED_COPY 0xe4 failure return COPY TARGET DEVICE NOT REACHABLE
  target: Re-add missing SCF_ACK_KREF assignment in v4.1.y
  iscsi-target: fix iscsi cmd leak
  iscsi-target: fix spelling mistake "Unsolicitied" -> "Unsolicited"
  target/user: Fix comments to not refer to data ring
  target/user: Return an error if cmd data size is too large
  target/user: Use sense_reason_t in tcmu_queue_cmd_ring
2016-10-23 16:37:58 -07:00
Cyrill Gorcunov
432490f9d4 net: ip, diag -- Add diag interface for raw sockets
In criu we are actively using diag interface to collect sockets
present in the system when dumping applications. And while for
unix, tcp, udp[lite], packet, netlink it works as expected,
the raw sockets do not have. Thus add it.

v2:
 - add missing sock_put calls in raw_diag_dump_one (by eric.dumazet@)
 - implement @destroy for diag requests (by dsa@)

v3:
 - add export of raw_abort for IPv6 (by dsa@)
 - pass net-admin flag into inet_sk_diag_fill due to
   changes in net-next branch (by dsa@)

v4:
 - use @pad in struct inet_diag_req_v2 for raw socket
   protocol specification: raw module carries sockets
   which may have custom protocol passed from socket()
   syscall and sole @sdiag_protocol is not enough to
   match underlied ones
 - start reporting protocol specifed in socket() call
   when sockets are raw ones for the same reason: user
   space tools like ss may parse this attribute and use
   it for socket matching

v5 (by eric.dumazet@):
 - use sock_hold in raw_sock_get instead of atomic_inc,
   we're holding (raw_v4_hashinfo|raw_v6_hashinfo)->lock
   when looking up so counter won't be zero here.

v6:
 - use sdiag_raw_protocol() helper which will access @pad
   structure used for raw sockets protocol specification:
   we can't simply rename this member without breaking uapi

v7:
 - sine sdiag_raw_protocol() helper is not suitable for
   uapi lets rather make an alias structure with proper
   names. __check_inet_diag_req_raw helper will catch
   if any of structure unintentionally changed.

CC: David S. Miller <davem@davemloft.net>
CC: Eric Dumazet <eric.dumazet@gmail.com>
CC: David Ahern <dsa@cumulusnetworks.com>
CC: Alexey Kuznetsov <kuznet@ms2.inr.ac.ru>
CC: James Morris <jmorris@namei.org>
CC: Hideaki YOSHIFUJI <yoshfuji@linux-ipv6.org>
CC: Patrick McHardy <kaber@trash.net>
CC: Andrey Vagin <avagin@openvz.org>
CC: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-23 19:35:24 -04:00
Linus Torvalds
e6995f22d3 Couple of hwmon fixes
Fix a potential ERR_PTR dereference in max31790 driver,
 and handle handle temperature readings below 0 in adm9240
 driver.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJYC3RdAAoJEMsfJm/On5mB5OEQAIySEJO6fTb9pVfNTpez413F
 he5aPNIywDojpMx2ksFyrN2GMMbLFPq1ajLPYA6sf9yPmSLhkUiQpCy9nwtLW5Dd
 eNR7tvE1amqNJ+m8EITzl+P4p2+BqWJ0KlNc/SfrdEQTmnjR2lPd75pcR0IpMF12
 yM59BrwtPGsHr3/lJbSYH1Uh+9tUyyfx0GfXmIMjk7xbC4bDFVgAnF2vnVRhLWcN
 WlRBUWye80vHz8uJAlCHMnrDrgUfPIZwVFblYoMu2ED8tt7+jgcQK91h7OBXj6VE
 T7YsMz1OCeGL42CYvgNsvCYVgeajssbdZX0za5+uQRNJA+ElTt7HtyEp6PL4wjOr
 5MD444KgF6OBV7l6f18bOm+Q8OaS22RddrpaRIfO2VkvjXkffSIpkKUMawYaIP2S
 cPGbO0q/V3Gw0qw2CD4FtkNs9f0RsEl4a8uiif8ndRhSK6aQs2EC/ul2Z9wVfXx1
 EYTHmtdl9Mrs4X9roP6YZKUBaUseQnPCv/Lkyd6vZs2fByiOH7DqIw5ciAP551oU
 AYvFsab6oK3FZfX4qlESiCkZlAN/sr3Xqu6Ytk2rkFitjeYvRzJecpdU7hqliXZX
 Rviiy7d/1d/GpC7mPxDiccrfebyYqtObOrYMBW0XY2kbWsc0ek37n4zxX1afsU5Y
 2AnjoZHpuitI55FeuGgG
 =N52z
 -----END PGP SIGNATURE-----

Merge tag 'hwmon-for-linus-v4.9-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging

Pull hwmon fixes from Guenter Roeck:
 "Couple of hwmon fixes:

  Fix a potential ERR_PTR dereference in max31790 driver, and handle
  temperature readings below 0 in adm9240 driver"

* tag 'hwmon-for-linus-v4.9-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging:
  hwmon: (max31790) potential ERR_PTR dereference
  hwmon: (adm9240) handle temperature readings below 0
2016-10-23 16:21:28 -07:00
Linus Torvalds
5766e9d25f A small bug fix and a new driver for acting as an IPMI device.
I was on vacation during the merge window (a long vacation)
 but this is a bug fix that should go in and a new driver that shouldn't
 hurt anything.
 
 This has been in linux-next for a month or so.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iEYEABECAAYFAlgKVpoACgkQIXnXXONXERdGBACeONBS0wOf4Rv+bxSOdeJcTwLJ
 rmoAoJ2R0BpWE1imvcC+AqXOoqg2c48k
 =P4Dz
 -----END PGP SIGNATURE-----

Merge tag 'for-linus-4.9-2' of git://git.code.sf.net/p/openipmi/linux-ipmi

Pull IPMI updates from Corey Minyard:
 "A small bug fix and a new driver for acting as an IPMI device.

  I was on vacation during the merge window (a long vacation) but this
  is a bug fix that should go in and a new driver that shouldn't hurt
  anything.

  This has been in linux-next for a month or so"

* tag 'for-linus-4.9-2' of git://git.code.sf.net/p/openipmi/linux-ipmi:
  ipmi: fix crash on reading version from proc after unregisted bmc
  ipmi/bt-bmc: remove redundant return value check of platform_get_resource()
  ipmi/bt-bmc: add a dependency on ARCH_ASPEED
  ipmi: Fix ioremap error handling in bt-bmc
  ipmi: add an Aspeed BT IPMI BMC driver
2016-10-23 15:56:23 -07:00
Javier Martinez Canillas
6d8d271eee gpio: ath79: Fix module autoload
If the driver is built as a module, autoload won't work because the module
alias information is not filled. So user-space can't match the registered
device with the corresponding module.

Export the module alias information using the MODULE_DEVICE_TABLE() macro.

Before this patch:

$ modinfo drivers/gpio/gpio-ath79.ko | grep alias
$

After this patch:

$ modinfo drivers/gpio/gpio-ath79.ko | grep alias
alias:          of:N*T*Cqca,ar9340-gpioC*
alias:          of:N*T*Cqca,ar9340-gpio
alias:          of:N*T*Cqca,ar7100-gpioC*
alias:          of:N*T*Cqca,ar7100-gpio

Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
Acked-by: Aban Bedel <albeu@free.fr>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-10-24 00:23:05 +02:00
David S. Miller
44060abe1d Merge branch 'for-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth
Johan Hedberg says:

====================
pull request: bluetooth 2016-10-21

Here are some more Bluetooth fixes for the 4.9 kernel:

 - Fix to btwilink driver probe function return value
 - Power management fix to hci_bcm
 - Fix to encoding name in scan response data

Please let me know if there are any issues pulling. Thanks.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-23 17:51:38 -04:00
Ray Jui
963d790468 arm64: dts: Updated NAND DT properties for NS2 SVK
This patch adds NAND DT properties for NS2 SVK to configure the bus
width width and OOB sector size

Signed-off-by: Prafulla Kota <prafulla.kota@broadcom.com>
Signed-off-by: Ray Jui <ray.jui@broadcom.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2016-10-23 14:50:20 -07:00
Thomas Graf
f76a9db351 lwt: Remove unused len field
The field is initialized by ILA and MPLS but never used. Remove it.

Signed-off-by: Thomas Graf <tgraf@suug.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-23 17:45:01 -04:00
Jiri Slaby
a4b8e71b05 net: sctp, forbid negative length
Most of getsockopt handlers in net/sctp/socket.c check len against
sizeof some structure like:
        if (len < sizeof(int))
                return -EINVAL;

On the first look, the check seems to be correct. But since len is int
and sizeof returns size_t, int gets promoted to unsigned size_t too. So
the test returns false for negative lengths. Yes, (-1 < sizeof(long)) is
false.

Fix this in sctp by explicitly checking len < 0 before any getsockopt
handler is called.

Note that sctp_getsockopt_events already handled the negative case.
Since we added the < 0 check elsewhere, this one can be removed.

If not checked, this is the result:
UBSAN: Undefined behaviour in ../mm/page_alloc.c:2722:19
shift exponent 52 is too large for 32-bit type 'int'
CPU: 1 PID: 24535 Comm: syz-executor Not tainted 4.8.1-0-syzkaller #1
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.9.1-0-gb3ef39f-prebuilt.qemu-project.org 04/01/2014
 0000000000000000 ffff88006d99f2a8 ffffffffb2f7bdea 0000000041b58ab3
 ffffffffb4363c14 ffffffffb2f7bcde ffff88006d99f2d0 ffff88006d99f270
 0000000000000000 0000000000000000 0000000000000034 ffffffffb5096422
Call Trace:
 [<ffffffffb3051498>] ? __ubsan_handle_shift_out_of_bounds+0x29c/0x300
...
 [<ffffffffb273f0e4>] ? kmalloc_order+0x24/0x90
 [<ffffffffb27416a4>] ? kmalloc_order_trace+0x24/0x220
 [<ffffffffb2819a30>] ? __kmalloc+0x330/0x540
 [<ffffffffc18c25f4>] ? sctp_getsockopt_local_addrs+0x174/0xca0 [sctp]
 [<ffffffffc18d2bcd>] ? sctp_getsockopt+0x10d/0x1b0 [sctp]
 [<ffffffffb37c1219>] ? sock_common_getsockopt+0xb9/0x150
 [<ffffffffb37be2f5>] ? SyS_getsockopt+0x1a5/0x270

Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Cc: Vlad Yasevich <vyasevich@gmail.com>
Cc: Neil Horman <nhorman@tuxdriver.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: linux-sctp@vger.kernel.org
Cc: netdev@vger.kernel.org
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-23 17:43:15 -04:00
Fabio Estevam
235bde1ed3 net: fec: Call swap_buffer() prior to IP header alignment
Commit 3ac72b7b63 ("net: fec: align IP header in hardware") breaks
networking on mx28.

There is an erratum on mx28 (ENGR121613 - ENET big endian mode
not compatible with ARM little endian) that requires an additional
byte-swap operation to workaround this problem.

So call swap_buffer() prior to performing the IP header alignment
to restore network functionality on mx28.

Fixes: 3ac72b7b63 ("net: fec: align IP header in hardware")
Reported-and-tested-by: Henri Roosen <henri.roosen@ginzinger.com>
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-23 17:41:41 -04:00
Jason A. Donenfeld
b678aa578c ipv6: do not increment mac header when it's unset
Otherwise we'll overflow the integer. This occurs when layer 3 tunneled
packets are handed off to the IPv6 layer.

Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-23 17:38:58 -04:00
Sudarsana Reddy Kalluru
a6e2846cac bnx2x: Use the correct divisor value for PHC clock readings.
Time Sync (PTP) implementation uses the divisor/shift value for converting
the clock ticks to nanoseconds. Driver currently defines shift value as 1,
this results in the nanoseconds value to be calculated as half the actual
value. Hence the user application fails to synchronize the device clock
value with the PTP master device clock. Need to use the 'shift' value of 0.

Signed-off-by: Sony.Chacko <Sony.Chacko@cavium.com>
Signed-off-by: Sudarsana Reddy Kalluru <Sudarsana.Kalluru@cavium.com>
Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-23 17:34:41 -04:00
Andrey Vagin
7281a66590 net: allow to kill a task which waits net_mutex in copy_new_ns
net_mutex can be locked for a long time. It may be because many
namespaces are being destroyed or many processes decide to create
a network namespace.

Both these operations are heavy, so it is better to have an ability to
kill a process which is waiting net_mutex.

Cc: "David S. Miller" <davem@davemloft.net>
Cc: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: Andrei Vagin <avagin@openvz.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-23 17:33:39 -04:00
Shmulik Ladkani
d65f2fa680 net/sched: em_meta: Fix 'meta vlan' to correctly recognize zero VID frames
META_COLLECTOR int_vlan_tag() assumes that if the accel tag (vlan_tci)
is zero, then no vlan accel tag is present.

This is incorrect for zero VID vlan accel packets, making the following
match fail:
  tc filter add ... basic match 'meta(vlan mask 0xfff eq 0)' ...

Apparently 'int_vlan_tag' was implemented prior VLAN_TAG_PRESENT was
introduced in 05423b2 "vlan: allow null VLAN ID to be used"
(and at time introduced, the 'vlan_tx_tag_get' call in em_meta was not
 adapted).

Fix, testing skb_vlan_tag_present instead of testing skb_vlan_tag_get's
value.

Fixes: 05423b2413 ("vlan: allow null VLAN ID to be used")
Fixes: 1a31f2042e ("netsched: Allow meta match on vlan tag on receive")

Signed-off-by: Shmulik Ladkani <shmulik.ladkani@gmail.com>
Cc: Eric Dumazet <eric.dumazet@gmail.com>
Cc: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-23 17:31:25 -04:00
David S. Miller
1bac938141 Merge branch 'mlxsw-cosmetics-plus-res-mgmt-rewrite'
Jiri Pirko says:

====================
mlxsw: Driver update

Mostly cosmetics and small resource values management rewrite.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-23 17:21:35 -04:00
Jiri Pirko
c1a3831121 mlxsw: Convert resources into array
Since the number of resources is going to get much bigger, ease up the
addition by simly defining IDs. Convert the existing structure members
to a set array, one for validity, one for values. Introduce a set of
getters and setters for easy access.

Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Reviewed-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-23 17:21:29 -04:00
Jiri Pirko
f38a2314e5 mlxsw: cmd: Push resource query defines to cmd.h
Push cmd resource query related defines to cmd.h where they belong.

Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Reviewed-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-23 17:21:29 -04:00
Jiri Pirko
8e9658d567 mlxsw: reg: Generare register names automatically
Extend the MLXSW_REG_DEFINE macro to store register name in string form.
Use this string later on instead of hard coded string values.

Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Acked-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-23 17:21:29 -04:00