Commit graph

661,541 commits

Author SHA1 Message Date
Eric Biggers
f16743e0c7 crypto: cmac - fix alignment of 'consts'
The per-transform 'consts' array is accessed as __be64 in
crypto_cmac_digest_setkey() but was only guaranteed to be aligned to
__alignof__(long).  Fix this by aligning it to __alignof__(__be64).

Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2016-10-21 11:03:42 +08:00
Eric Biggers
48ee41bf5b crypto: cmac - return -EINVAL if block size is unsupported
cmac_create() previously returned 0 if a cipher with a block size other
than 8 or 16 bytes was specified.  It should return -EINVAL instead.
Granted, this doesn't actually change any behavior because cryptomgr
currently ignores any return value other than -EAGAIN from template
->create() functions.

Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2016-10-21 11:03:42 +08:00
Eric Biggers
9c8ae17bbf crypto: api - Remove no-op exit_ops code
crypto_exit_cipher_ops() and crypto_exit_compress_ops() are no-ops and
have been for a long time, so remove them.

Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2016-10-21 11:03:42 +08:00
Eric Biggers
afb5a0a947 crypto: skcipher - Remove unused crypto_lookup_skcipher() declaration
The definition of crypto_lookup_skcipher() was already removed in
commit 3a01d0ee2b ("crypto: skcipher - Remove top-level givcipher
interface").  So the declaration should be removed too.

Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2016-10-21 11:03:41 +08:00
Christophe Jaillet
4c36941aee crypto: crypto4xx - Fix size used in dma_free_coherent()
The size used in 'dma_free_coherent()' looks un-initialized here.
ctx->sa_len is set a few lines below and is apparently not set by the
caller.
So use 'size' as in the corresponding 'dma_alloc_coherent()' a few lines
above.

This has been spotted with coccinelle, using the following script:
////////////////////
@r@
expression x0, x1, y0, y1, z0, z1, t0, t1, ret;
@@

*   ret = dma_alloc_coherent(x0, y0, z0, t0);
    ...
*   dma_free_coherent(x1, y1, ret, t1);

@script:python@
y0 << r.y0;
y1 << r.y1;

@@
if y1.find(y0) == -1:
 print "WARNING: sizes look different:  '%s'   vs   '%s'" % (y0, y1)
////////////////////

Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2016-10-21 11:03:41 +08:00
Romain Perier
f34dad1721 crypto: marvell - Don't break chain for computable last ahash requests
Currently, the driver breaks chain for all kind of hash requests in order to
don't override intermediate states of partial ahash updates. However, some final
ahash requests can be directly processed by the engine, and so without
intermediate state. This is typically the case for most for the HMAC requests
processed via IPSec.

This commits adds a TDMA descriptor to copy context for these of requests
into the "op" dma pool, then it allow to chain these requests at the DMA level.
The 'complete' operation is also updated to retrieve the MAC digest from the
right location.

Signed-off-by: Romain Perier <romain.perier@free-electrons.com>
Acked-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2016-10-21 11:03:40 +08:00
Romain Perier
0c99620f0a crypto: marvell - Use an unique pool to copy results of requests
So far, we used a dedicated dma pool to copy the result of outer IV for
cipher requests. Instead of using a dma pool per outer data, we prefer
use the op dma pool that contains all part of the request from the SRAM.
Then, the outer data that is likely to be used by the 'complete'
operation, is copied later. In this way, any type of result can be
retrieved by DMA for cipher or ahash requests.

Signed-off-by: Romain Perier <romain.perier@free-electrons.com>
Acked-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2016-10-21 11:03:40 +08:00
Alec Ari
1f696097ad crypto: api - Fix Kconfig dependencies for FIPS
Currently FIPS depends on MODULE_SIG, even if MODULES is disabled.
This change allows the enabling of FIPS without support for modules.

If module loading support is enabled, only then does
FIPS require MODULE_SIG.

Signed-off-by: Alec Ari <neotheuser@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2016-10-21 11:03:40 +08:00
Cyrille Pitchen
d52db5188a crypto: atmel-aes - add support to the XTS mode
This patch adds the xts(aes) algorithm, which is supported from
hardware version 0x500 and above (sama5d2x).

Signed-off-by: Cyrille Pitchen <cyrille.pitchen@atmel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2016-10-21 11:03:39 +08:00
Cyrille Pitchen
f709dc86bc crypto: atmel-aes - fix compiler error when VERBOSE_DEBUG is defined
This patch fixes a compiler error when VERBOSE_DEBUG is defined. Indeed,
in atmel_aes_write(), the 3rd argument of atmel_aes_reg_name() was
missing.

Signed-off-by: Cyrille Pitchen <cyrille.pitchen@atmel.com>
Reported-by: Levent Demir <levent.demir@inria.fr>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2016-10-21 11:03:39 +08:00
Romain Perier
a0743c1536 arm64: dts: marvell: add TRNG description for Armada 8K CP
This commits adds the devicetree description of the SafeXcel IP-76 TRNG
found in the two Armada CP110.

Signed-off-by: Romain Perier <romain.perier@free-electrons.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2016-10-21 10:27:53 +08:00
Romain Perier
383212425c hwrng: omap - Add device variant for SafeXcel IP-76 found in Armada 8K
This commits adds a device variant for Safexcel,EIP76 found in Marvell
Armada 8k. It defines registers mapping with the good offset and add a
specific initialization function.

Signed-off-by: Romain Perier <romain.perier@free-electrons.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2016-10-21 10:27:52 +08:00
Romain Perier
f0d5a11200 hwrng: omap - Don't prefix the probe message with OMAP
So far, this driver was only used for OMAP SoCs. However, if a device
variant is added for an IP block that has nothing to do with the OMAP
platform, the message "OMAP Random Number Generator Ver" is displayed
anyway. Instead of hardcoding "OMAP" into this message, we decide to
only display "Random Number Generator". As dev_info is already
pre-pending the message with the name of the device, we have enough
informations.

Signed-off-by: Romain Perier <romain.perier@free-electrons.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2016-10-21 10:27:51 +08:00
Romain Perier
e54feeb0db hwrng: omap - Add support for 128-bit output of data
So far, this driver only supports up to 64 bits of output data generated
by an RNG. Some IP blocks, like the SafeXcel IP-76 supports up to 128
bits of output data. This commits renames registers descriptions
OUTPUT_L_REG and OUTPUT_H_REG to OUTPUT_0_REG and OUPUT_1_REG,
respectively. It also adds two new values to the enumeration of existing
registers: OUTPUT_2_REG and OUTPUT_3_REG.

Signed-off-by: Romain Perier <romain.perier@free-electrons.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2016-10-21 10:27:51 +08:00
Romain Perier
b23d2d92ce hwrng: omap - Remove global definition of hwrng
The omap-rng driver currently assumes that there will only ever be a
single instance of an RNG device. For this reason, there is a statically
allocated struct hwrng, with a fixed name. However, registering two
struct hwrng with the same isn't accepted by the RNG framework, so we
need to switch to a dynamically allocated struct hwrng, each using a
different name. Then, we define the name of this hwrng to "dev_name(dev)",
so the name of the data structure is unique per device.

Signed-off-by: Romain Perier <romain.perier@free-electrons.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2016-10-21 10:27:51 +08:00
Romain Perier
69eb4d0190 hwrng: omap - Switch to non-obsolete read API implementation
The ".data_present" and ".data_read" operations are marked as OBSOLETE
in the hwrng API. We have to use the ".read" operation instead. It makes
the driver simpler and moves the busy loop, that waits until enough data
is generated, to the read function. We simplify this step by only
checking the status of the engine, if there is data, we copy the data to
the output buffer and the amout of copied data is returned to the caller,
otherwise zero is returned. The hwrng core will re-call the read operation
as many times as required until enough data has been copied.

Signed-off-by: Romain Perier <romain.perier@free-electrons.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2016-10-21 10:26:21 +08:00
Romain Perier
52060836f7 dt-bindings: omap-rng: Document SafeXcel IP-76 device variant
This commits add missing fields in the documentation that are used
by the new device variant. It also includes DT example to show how
the variant should be used.

Signed-off-by: Romain Perier <romain.perier@free-electrons.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2016-10-21 10:26:20 +08:00
Romain Perier
e4d6013eaf dt-bindings: Add vendor prefix for INSIDE Secure
This commits adds a vendor for the company INSIDE Secure.
See https://www.insidesecure.com, for more details.

Signed-off-by: Romain Perier <romain.perier@free-electrons.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2016-10-21 10:26:17 +08:00
Florian Fainelli
97dcaa0fcf kexec: Export kexec_in_progress to modules
The bcm_sf2 driver uses kexec_in_progress to know whether it can power
down an integrated PHY during shutdown, and can be built as a module.
Other modules may be using this in the future, so export it.

Fixes: 2399d6143f ("net: dsa: bcm_sf2: Prevent GPHY shutdown for kexec'd kernels")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-20 21:53:45 -04:00
Christophe JAILLET
91bbc174d4 clk: at91: Fix a return value in case of error
If 'clk_hw_register()' fails, it is likely that we expect to return an
error instead of a valid pointer (which would mean success).

Fix commit f5644f10dc ("clk: at91: Migrate to clk_hw based registration
and OF APIs")

Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-10-20 16:37:56 -07:00
Bob Moore
69d4e425d2 ACPICA: Update version to 20160930
ACPICA commit cb8dfc8157ae54aadb1beb31d996db9327438183

Version 20160930.

Link: cb8dfc81
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-10-21 01:33:40 +02:00
Bob Moore
066118ffe9 ACPICA: Move acpi_gbl_max_loop_iterations to the public globals file
ACPICA commit eb8b2194200867dec9ba38e5ab98b5b8ef262945

Moved to acpixf.h with the rest of the configuration globals.

Link: eb8b2194
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-10-21 01:33:40 +02:00
Bob Moore
a335e95590 ACPICA: Disassembler: Fix for Divide() support, new support for test suite
ACPICA commit 4b367408659af08fd44839866ec301285284e6f4

Fixes a problem with complex expressions where an illegal mix
of legacy ASL and ASL+ could be emitted.

Adds new support for ASLTS that disables some disassembler
optimizations could be changed during a conversion to ASL+.
These expressions are now emitted in legacy ASL instead
of ASL+.

Link: 4b367408
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-10-21 01:33:39 +02:00
Bob Moore
cacf54750a ACPICA: Increase loop limit for AE_AML_INFINITE_LOOP exception
ACPICA commit 9f83b34cb172549c20f18663bc7460fb4145a75b

increase loop limit to accomodate faster processors. From 64k loops max
to 1 million.

Link: 9f83b34c
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-10-21 01:33:39 +02:00
Lv Zheng
b97acdf1b0 ACPICA: MacOSX: Fix wrong sem_destroy definition
ACPICA commit bbcb58f7875381d5c7f3d614bad3bc628a3f5cc6

The following build errors can be seen for MacOSX builds:
.../osunixxf.c:882:9: error: 'sem_close' is deprecated [-Werror,-Wdeprecated-declarations]
.../acmacosx.h:122:29: note: expanded from macro 'sem_destroy'
#define sem_destroy         sem_close

sem_destroy() issue is caused by the wrong order of the following lines:
  #define #sem_destroy        sem_close
  #include <semaphore.h>
This patch fixes it by removing the buggy re-definitiion. Lv Zheng.

Linux is not affected by this change.

Link: bbcb58f7
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-10-21 01:33:39 +02:00
Lv Zheng
6c9fd7eda7 ACPICA: MacOSX: Fix anonymous semaphore implementation
ACPICA commit 01eb9a58f4cf6300a0feb838a02bc4b1895c76e8
ACPICA commit de5b9c0ef1ccb264cbe57c88f6dd3fbf8229f907

The following build errors can be seen for MacOSX builds:
.../osunixxf.c:829:42: error: 'tmpnam' is deprecated: This function is provided for compatibility reasons only.  Due to security concerns inherent in the design of tmpnam(3), it is highly recommended that you use mkstemp(3) instead. [-Werror,-Wdeprecated-declarations]

Using of temporal file name functions can easily result in bus errors on
MacOSX. This patch implements anonymous semaphore using an automatic
increasing number. Lv Zheng.

Linux is not affected by this change.

Link: 01eb9a58
Link: de5b9c0e
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-10-21 01:33:39 +02:00
Bob Moore
3a993ab603 ACPICA: Update an info message during table load phase
ACPICA commit 1d435008fd9ea34768df8862de9cb6fff69650f6

Only emit an extra newline for acpiexec.

Link: 1d435008
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-10-21 01:33:38 +02:00
Mika Westerberg
28e3d7002b watchdog: wdat_wdt: Ping the watchdog on resume
It turns out we need to ping the watchdog hardware on resume when we
re-program it. Otherwise this causes inadvertent reset to trigger
right after the resume is complete.

Fixes: 058dfc7670 (ACPI / watchdog: Add support for WDAT hardware watchdog)
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Acked-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-10-21 01:28:33 +02:00
Linus Torvalds
6f33d6458e Power management fix for v4.9-rc2
This fixes pointer arithmetics mess-up in the cpufreq core introduced
 by one of recent commits and leading to all kinds of breakage from
 kernel crashes to incorrect governor decisions (Sergey Senozhatsky).
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.22 (GNU/Linux)
 
 iQIcBAABCAAGBQJYCT7eAAoJEILEb/54YlRxHnMP/3HOV7MsdthmGCl3y5GLVpcA
 KUbLd5rIpfAYmT6nMIrU0CzddROdcP1XD/dHpoEvq693GG8bjS9K0rTiBAI/xlAd
 osx9wTI0nX6XZpQvWY0UwJ8EVOgbX/cwcDMdMLbT7sVS4jCcwAfqopFNT9vRHVv+
 YVzw/hsGTa1YmFlRbraAtgl2MDRjTcqPKYf6HkhrW+IW8yvI3mEuCF0hsx31bBE/
 4MxTZrJuScE3f7FcfpPNr67yCSeDJEZ3ZqZq5ANqpiKdsV2PFf2YIhkAfsuCjSIO
 aBKpbxifXsV9klzIQCDkPOK/fz+5od1NzOJiJ5ZgC80iV7NNWtWLWBo/75ABPeAk
 8sx1+EIjtUZ9lbr3KmErZzebZpMIdB9r+kHndBWVDt4RXiZZnUPykuyuRDzRW465
 o4CA8foANDFQwjHHzgSkilKJVjhN23R5PpJHM8GhI1jAkrPXevOxOvTdgz2yeAfN
 rL8Zw56L7oXJ0EjTdh93OV26udk7eZyMZl/MS/D4/bSlyF7Ma8/9gqmh/pkQj1yc
 yNbucupdkEc5YDUbytfqHkcbu2IULZSnNkkNdYtDDkJ89r0LEsVMhQFapwRqU6o1
 StKvdWEFmgutS4CG4zyzVYw7m/R1kw1p9T8ae6Dvesqn3egd+LwTOFu6Dvp1IsMC
 ONb3WBd4t88MRJSeAZLa
 =zILz
 -----END PGP SIGNATURE-----

Merge tag 'pm-4.9-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm

Pull power management fix from Rafael Wysocki:
 "This fixes the pointer arithmetics mess-up in the cpufreq core
  introduced by one of recent commits and leading to all kinds of
  breakage from kernel crashes to incorrect governor decisions (Sergey
  Senozhatsky)"

* tag 'pm-4.9-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  cpufreq: fix overflow in cpufreq_table_find_index_dl()
2016-10-20 15:32:51 -07:00
Rodrigo Vivi
0fdd491861 drm/i915: KBL - Recommended buffer translation programming for DisplayPort
According to spec: "KBL re-uses SKL values, except where
specific KBL values are listed."

And recently spec has changed adding different table for Display Port only.
But for all SKUs (H,S,U,Y) we have slightly different values.

v2: Fix wrong condition spotted by Jani.
v3: Fix 7th entry of KBL H and S table - by Manasi.

Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Manasi Navare <manasi.d.navare@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Manasi Navare <manasi.d.navare@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1476806256-13318-1-git-send-email-rodrigo.vivi@intel.com
2016-10-20 14:50:44 -07:00
Rodrigo Vivi
0a91877cf2 drm/i915: Move down skl/kbl ddi iboost and n_edp_entires fixup
No functional change.
Only moving this fixup block out of ddi_translation definitions
so we can split skl and kbl cleanly.

v2: Remove useless comment. (Ville)

Cc: Manasi Navare <manasi.d.navare@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Manasi Navare <manasi.d.navare@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1475258757-29540-1-git-send-email-rodrigo.vivi@intel.com
2016-10-20 14:50:15 -07:00
Rafael J. Wysocki
350d32395b Merge branch 'pm-cpufreq'
* pm-cpufreq:
  cpufreq: fix overflow in cpufreq_table_find_index_dl()
2016-10-20 23:24:58 +02:00
Chen-Yu Tsai
5938768388 Revert "clocksource/drivers/timer_sun5i: Replace code by clocksource_mmio_init"
struct clocksource is also used by the clk notifier callback, to
unregister and re-register the clocksource with a different clock rate.
clocksource_mmio_init does not pass back a pointer to the struct used,
and the clk notifier callback assumes that the struct clocksource in
struct sun5i_timer_clksrc is valid. This results in a kernel NULL
pointer dereference when the hstimer clock is changed:

Unable to handle kernel NULL pointer dereference at virtual address 00000004
[<c03a4678>] (clocksource_unbind) from [<c03a46d4>] (clocksource_unregister+0x2c/0x44)
[<c03a46d4>] (clocksource_unregister) from [<c0a6f350>] (sun5i_rate_cb_clksrc+0x34/0x3c)
[<c0a6f350>] (sun5i_rate_cb_clksrc) from [<c035ea50>] (notifier_call_chain+0x44/0x84)
[<c035ea50>] (notifier_call_chain) from [<c035edc0>] (__srcu_notifier_call_chain+0x44/0x60)
[<c035edc0>] (__srcu_notifier_call_chain) from [<c035edf4>] (srcu_notifier_call_chain+0x18/0x20)
[<c035edf4>] (srcu_notifier_call_chain) from [<c0670174>] (__clk_notify+0x70/0x7c)
[<c0670174>] (__clk_notify) from [<c06702c0>] (clk_propagate_rate_change+0xa4/0xc4)
[<c06702c0>] (clk_propagate_rate_change) from [<c0670288>] (clk_propagate_rate_change+0x6c/0xc4)

Revert the commit for now. clocksource_mmio_init can be made to pass back
a pointer, but the code churn and usage of an inner struct might not be
worth it.

Fixes: 157dfadef8 ("clocksource/drivers/timer_sun5i: Replace code by clocksource_mmio_init")
Reported-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Cc: linux-sunxi@googlegroups.com
Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
Cc: linux-arm-kernel@lists.infradead.org
Link: http://lkml.kernel.org/r/20161018054918.26855-1-wens@csie.org
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-10-20 21:58:58 +02:00
David S. Miller
9e58c5dc4b Merge branch 'MTU-core-range-checking-more'
Jarod Wilson says:

====================
net: use core MTU range checking everywhere

This stack of patches should get absolutely everything in the kernel
converted from doing their own MTU range checking to the core MTU range
checking. This second spin includes alterations to hopefully fix all
concerns raised with the first, as well as including some additional
changes to drivers and infrastructure where I completely missed necessary
updates.

These have all been built through the 0-day build infrastructure via the
(rebasing) master branch at https://github.com/jarodwilson/linux-muck, which
at the time of the most recent compile across 147 configs, was based on
net-next at commit 7b1536ef0a.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-20 14:51:11 -04:00
Jarod Wilson
b96f9afee4 ipv4/6: use core net MTU range checking
ipv4/ip_tunnel:
- min_mtu = 68, max_mtu = 0xFFF8 - dev->hard_header_len - t_hlen
- preserve all ndo_change_mtu checks for now to prevent regressions

ipv6/ip6_tunnel:
- min_mtu = 68, max_mtu = 0xFFF8 - dev->hard_header_len
- preserve all ndo_change_mtu checks for now to prevent regressions

ipv6/ip6_vti:
- min_mtu = 1280, max_mtu = 65535
- remove redundant vti6_change_mtu

ipv6/sit:
- min_mtu = 1280, max_mtu = 0xFFF8 - t_hlen
- remove redundant ipip6_tunnel_change_mtu

CC: netdev@vger.kernel.org
CC: "David S. Miller" <davem@davemloft.net>
CC: Alexey Kuznetsov <kuznet@ms2.inr.ac.ru>
CC: James Morris <jmorris@namei.org>
CC: Hideaki YOSHIFUJI <yoshfuji@linux-ipv6.org>
CC: Patrick McHardy <kaber@trash.net>
Signed-off-by: Jarod Wilson <jarod@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-20 14:51:10 -04:00
Jarod Wilson
46b3ef4cdf s390/net: use net core MTU range checking
ctcm:
- min_mtu = 576, max_mtu = 65527

netiucv:
- min_mtu = 576, max_mtu = 65535

qeth:
- min_mtu = 64, max_mtu = 65535

CC: netdev@vger.kernel.org
CC: linux-s390@vger.kernel.org
CC: Ursula Braun <ubraun@linux.vnet.ibm.com>
Signed-off-by: Jarod Wilson <jarod@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-20 14:51:10 -04:00
Jarod Wilson
b3e3893e12 net: use core MTU range checking in misc drivers
firewire-net:
- set min/max_mtu
- remove fwnet_change_mtu

nes:
- set max_mtu
- clean up nes_netdev_change_mtu

xpnet:
- set min/max_mtu
- remove xpnet_dev_change_mtu

hippi:
- set min/max_mtu
- remove hippi_change_mtu

batman-adv:
- set max_mtu
- remove batadv_interface_change_mtu
- initialization is a little async, not 100% certain that max_mtu is set
  in the optimal place, don't have hardware to test with

rionet:
- set min/max_mtu
- remove rionet_change_mtu

slip:
- set min/max_mtu
- streamline sl_change_mtu

um/net_kern:
- remove pointless ndo_change_mtu

hsi/clients/ssi_protocol:
- use core MTU range checking
- remove now redundant ssip_pn_set_mtu

ipoib:
- set a default max MTU value
- Note: ipoib's actual max MTU can vary, depending on if the device is in
  connected mode or not, so we'll just set the max_mtu value to the max
  possible, and let the ndo_change_mtu function continue to validate any new
  MTU change requests with checks for CM or not. Note that ipoib has no
  min_mtu set, and thus, the network core's mtu > 0 check is the only lower
  bounds here.

mptlan:
- use net core MTU range checking
- remove now redundant mpt_lan_change_mtu

fddi:
- min_mtu = 21, max_mtu = 4470
- remove now redundant fddi_change_mtu (including export)

fjes:
- min_mtu = 8192, max_mtu = 65536
- The max_mtu value is actually one over IP_MAX_MTU here, but the idea is to
  get past the core net MTU range checks so fjes_change_mtu can validate a
  new MTU against what it supports (see fjes_support_mtu in fjes_hw.c)

hsr:
- min_mtu = 0 (calls ether_setup, max_mtu is 1500)

f_phonet:
- min_mtu = 6, max_mtu = 65541

u_ether:
- min_mtu = 14, max_mtu = 15412

phonet/pep-gprs:
- min_mtu = 576, max_mtu = 65530
- remove redundant gprs_set_mtu

CC: netdev@vger.kernel.org
CC: linux-rdma@vger.kernel.org
CC: Stefan Richter <stefanr@s5r6.in-berlin.de>
CC: Faisal Latif <faisal.latif@intel.com>
CC: linux-rdma@vger.kernel.org
CC: Cliff Whickman <cpw@sgi.com>
CC: Robin Holt <robinmholt@gmail.com>
CC: Jes Sorensen <jes@trained-monkey.org>
CC: Marek Lindner <mareklindner@neomailbox.ch>
CC: Simon Wunderlich <sw@simonwunderlich.de>
CC: Antonio Quartulli <a@unstable.cc>
CC: Sathya Prakash <sathya.prakash@broadcom.com>
CC: Chaitra P B <chaitra.basappa@broadcom.com>
CC: Suganath Prabu Subramani <suganath-prabu.subramani@broadcom.com>
CC: MPT-FusionLinux.pdl@broadcom.com
CC: Sebastian Reichel <sre@kernel.org>
CC: Felipe Balbi <balbi@kernel.org>
CC: Arvid Brodin <arvid.brodin@alten.se>
CC: Remi Denis-Courmont <courmisch@gmail.com>
Signed-off-by: Jarod Wilson <jarod@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-20 14:51:10 -04:00
Jarod Wilson
d0c2c9973e net: use core MTU range checking in virt drivers
hyperv_net:
- set min/max_mtu, per Haiyang, after rndis_filter_device_add

virtio_net:
- set min/max_mtu
- remove virtnet_change_mtu

vmxnet3:
- set min/max_mtu

xen-netback:
- min_mtu = 0, max_mtu = 65517

xen-netfront:
- min_mtu = 0, max_mtu = 65535

unisys/visor:
- clean up defines a little to not clash with network core or add
  redundat definitions

CC: netdev@vger.kernel.org
CC: virtualization@lists.linux-foundation.org
CC: "K. Y. Srinivasan" <kys@microsoft.com>
CC: Haiyang Zhang <haiyangz@microsoft.com>
CC: "Michael S. Tsirkin" <mst@redhat.com>
CC: Shrikrishna Khare <skhare@vmware.com>
CC: "VMware, Inc." <pv-drivers@vmware.com>
CC: Wei Liu <wei.liu2@citrix.com>
CC: Paul Durrant <paul.durrant@citrix.com>
CC: David Kershner <david.kershner@unisys.com>
Signed-off-by: Jarod Wilson <jarod@redhat.com>
Reviewed-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-20 14:51:09 -04:00
Jarod Wilson
91572088e3 net: use core MTU range checking in core net infra
geneve:
- Merge __geneve_change_mtu back into geneve_change_mtu, set max_mtu
- This one isn't quite as straight-forward as others, could use some
  closer inspection and testing

macvlan:
- set min/max_mtu

tun:
- set min/max_mtu, remove tun_net_change_mtu

vxlan:
- Merge __vxlan_change_mtu back into vxlan_change_mtu
- Set max_mtu to IP_MAX_MTU and retain dynamic MTU range checks in
  change_mtu function
- This one is also not as straight-forward and could use closer inspection
  and testing from vxlan folks

bridge:
- set max_mtu of IP_MAX_MTU and retain dynamic MTU range checks in
  change_mtu function

openvswitch:
- set min/max_mtu, remove internal_dev_change_mtu
- note: max_mtu wasn't checked previously, it's been set to 65535, which
  is the largest possible size supported

sch_teql:
- set min/max_mtu (note: max_mtu previously unchecked, used max of 65535)

macsec:
- min_mtu = 0, max_mtu = 65535

macvlan:
- min_mtu = 0, max_mtu = 65535

ntb_netdev:
- min_mtu = 0, max_mtu = 65535

veth:
- min_mtu = 68, max_mtu = 65535

8021q:
- min_mtu = 0, max_mtu = 65535

CC: netdev@vger.kernel.org
CC: Nicolas Dichtel <nicolas.dichtel@6wind.com>
CC: Hannes Frederic Sowa <hannes@stressinduktion.org>
CC: Tom Herbert <tom@herbertland.com>
CC: Daniel Borkmann <daniel@iogearbox.net>
CC: Alexander Duyck <alexander.h.duyck@intel.com>
CC: Paolo Abeni <pabeni@redhat.com>
CC: Jiri Benc <jbenc@redhat.com>
CC: WANG Cong <xiyou.wangcong@gmail.com>
CC: Roopa Prabhu <roopa@cumulusnetworks.com>
CC: Pravin B Shelar <pshelar@ovn.org>
CC: Sabrina Dubroca <sd@queasysnail.net>
CC: Patrick McHardy <kaber@trash.net>
CC: Stephen Hemminger <stephen@networkplumber.org>
CC: Pravin Shelar <pshelar@nicira.com>
CC: Maxim Krasnyansky <maxk@qti.qualcomm.com>
Signed-off-by: Jarod Wilson <jarod@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-20 14:51:09 -04:00
Jarod Wilson
8b6b4135e4 net: use core MTU range checking in WAN drivers
- set min/max_mtu in all hdlc drivers, remove hdlc_change_mtu
- sent max_mtu in lec driver, remove lec_change_mtu
- set min/max_mtu in x25_asy driver

CC: netdev@vger.kernel.org
CC: Krzysztof Halasa <khc@pm.waw.pl>
CC: Krzysztof Halasa <khalasa@piap.pl>
CC: Jan "Yenya" Kasprzak <kas@fi.muni.cz>
CC: Francois Romieu <romieu@fr.zoreil.com>
CC: Kevin Curtis <kevin.curtis@farsite.co.uk>
CC: Zhao Qiang <qiang.zhao@nxp.com>
Signed-off-by: Jarod Wilson <jarod@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-20 14:51:09 -04:00
Jarod Wilson
9c22b4a34e net: use core MTU range checking in wireless drivers
- set max_mtu in wil6210 driver
- set max_mtu in atmel driver
- set min/max_mtu in cisco airo driver, remove airo_change_mtu
- set min/max_mtu in ipw2100/ipw2200 drivers, remove libipw_change_mtu
- set min/max_mtu in p80211netdev, remove wlan_change_mtu
- set min/max_mtu in net/mac80211/iface.c and remove ieee80211_change_mtu
- set min/max_mtu in wimax/i2400m and remove i2400m_change_mtu
- set min/max_mtu in intersil/hostap and remove prism2_change_mtu
- set min/max_mtu in intersil/orinoco
- set min/max_mtu in tty/n_gsm and remove gsm_change_mtu

CC: netdev@vger.kernel.org
CC: linux-wireless@vger.kernel.org
CC: Maya Erez <qca_merez@qca.qualcomm.com>
CC: Simon Kelley <simon@thekelleys.org.uk>
CC: Stanislav Yakovlev <stas.yakovlev@gmail.com>
CC: Johannes Berg <johannes@sipsolutions.net>
CC: Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
Signed-off-by: Jarod Wilson <jarod@redhat.com>
Acked-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-20 14:51:08 -04:00
Jarod Wilson
f77f0aee4d net: use core MTU range checking in USB NIC drivers
usbnet:
- Remove stale new_mtu <= 0 check in usbnet.c
- Set min_mtu = 0, max_mtu = 65535 (sub-drivers must set their own
  max_mtu and/or min_mtu as needed)

r8152:
- Set appropriate max_mtu for different variants (1500 or 9194)

lan78xx:
- Set max_mtu = 9000

asix_driver:
- max_mtu = 16384 for ax88178 variant

ax88179:
- max_mtu = 4088

cdc_ncm:
- max_mtu from hardware

cdc-phonet:
- min_mtu = 6, max_mtu = 65541

sierra_net:
- max_mtu = 1500, call usbnet_change_mtu directly
- sierra_net_change_mtu checked for MTU > 1500, then called
  usbnet_change_mtu, but if we set max_mtu to let the network core handle
  the range check, then we can simply call usbnet_change_mtu directly

smsc75xx:
- max_mtu = 9000

CC: netdev@vger.kernel.org
CC: Woojung Huh <woojung.huh@microchip.com>
CC: Microchip Linux Driver Support <UNGLinuxDriver@microchip.com>
CC: Hayes Wang <hayeswang@realtek.com>
CC: Oliver Neukum <oneukum@suse.com>
CC: Steve Glendinning <steve.glendinning@shawell.net>
Signed-off-by: Jarod Wilson <jarod@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-20 14:51:08 -04:00
Jarod Wilson
d894be57ca ethernet: use net core MTU range checking in more drivers
Somehow, I missed a healthy number of ethernet drivers in the last pass.
Most of these drivers either were in need of an updated max_mtu to make
jumbo frames possible to enable again. In a few cases, also setting a
different min_mtu to match previous lower bounds. There are also a few
drivers that had no upper bounds checking, so they're getting a brand new
ETH_MAX_MTU that is identical to IP_MAX_MTU, but accessible by includes
all ethernet and ethernet-like drivers all have already.

acenic:
- min_mtu = 0, max_mtu = 9000

amazon/ena:
- min_mtu = 128, max_mtu = adapter->max_mtu

amd/xgbe:
- min_mtu = 0, max_mtu = 9000

sb1250:
- min_mtu = 0, max_mtu = 1518

cxgb3:
- min_mtu = 81, max_mtu = 65535

cxgb4:
- min_mtu = 81, max_mtu = 9600

cxgb4vf:
- min_mtu = 81, max_mtu = 65535

benet:
- min_mtu = 256, max_mtu = 9000

ibmveth:
- min_mtu = 68, max_mtu = 65535

ibmvnic:
- min_mtu = adapter->min_mtu, max_mtu = adapter->max_mtu
- remove now redundant ibmvnic_change_mtu

jme:
- min_mtu = 1280, max_mtu = 9202

mv643xx_eth:
- min_mtu = 64, max_mtu = 9500

mlxsw:
- min_mtu = 0, max_mtu = 65535
- Basically bypassing the core checks, and instead relying on dynamic
  checks in the respective switch drivers' ndo_change_mtu functions

ns83820:
- min_mtu = 0
- remove redundant ns83820_change_mtu, only checked for mtu > 1500

netxen:
- min_mtu = 0, max_mtu = 8000 (P2), max_mtu = 9600 (P3)

qlge:
- min_mtu = 1500, max_mtu = 9000
- driver only supports setting mtu to 1500 or 9000, so the core check only
  rules out < 1500 and > 9000, qlge_change_mtu still needs to check that
  the value is 1500 or 9000

qualcomm/emac:
- min_mtu = 46, max_mtu = 9194

xilinx_axienet:
- min_mtu = 64, max_mtu = 9000

Fixes: 61e84623ac ("net: centralize net_device min/max MTU checking")
CC: netdev@vger.kernel.org
CC: Jes Sorensen <jes@trained-monkey.org>
CC: Netanel Belgazal <netanel@annapurnalabs.com>
CC: Tom Lendacky <thomas.lendacky@amd.com>
CC: Santosh Raspatur <santosh@chelsio.com>
CC: Hariprasad S <hariprasad@chelsio.com>
CC: Sathya Perla <sathya.perla@broadcom.com>
CC: Ajit Khaparde <ajit.khaparde@broadcom.com>
CC: Sriharsha Basavapatna <sriharsha.basavapatna@broadcom.com>
CC: Somnath Kotur <somnath.kotur@broadcom.com>
CC: Thomas Falcon <tlfalcon@linux.vnet.ibm.com>
CC: John Allen <jallen@linux.vnet.ibm.com>
CC: Guo-Fu Tseng <cooldavid@cooldavid.org>
CC: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
CC: Jiri Pirko <jiri@mellanox.com>
CC: Ido Schimmel <idosch@mellanox.com>
CC: Manish Chopra <manish.chopra@qlogic.com>
CC: Sony Chacko <sony.chacko@qlogic.com>
CC: Rajesh Borundia <rajesh.borundia@qlogic.com>
CC: Timur Tabi <timur@codeaurora.org>
CC: Anirudha Sarangi <anirudh@xilinx.com>
CC: John Linn <John.Linn@xilinx.com>
Signed-off-by: Jarod Wilson <jarod@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-20 14:51:08 -04:00
Eric Dumazet
a681574c99 ipv4: disable BH in set_ping_group_range()
In commit 4ee3bd4a8c ("ipv4: disable BH when changing ip local port
range") Cong added BH protection in set_local_port_range() but missed
that same fix was needed in set_ping_group_range()

Fixes: b8f1a55639 ("udp: Add function to make source port for UDP tunnels")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: Eric Salo <salo@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-20 14:49:32 -04:00
Wei Yongjun
1a61a8f177 myri10ge: fix typo in parameter description
Fix typo in parameter description.

Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-20 14:47:53 -04:00
Wei Yongjun
81ad2b7de6 net: ethernet: mediatek: use dev_kfree_skb_any instead of dev_kfree_skb
Replace dev_kfree_skb with dev_kfree_skb_any in mtk_start_xmit()
which can be called from hard irq context (netpoll) and from
other contexts. mtk_start_xmit() only frees skbs that it has
dropped.

This is detected by Coccinelle semantic patch.

Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-20 14:47:52 -04:00
Wei Yongjun
d80f45ffd8 dwc_eth_qos: use dev_kfree_skb_any instead of dev_kfree_skb
Replace dev_kfree_skb with dev_kfree_skb_any in dwceqos_start_xmit()
which can be called from hard irq context (netpoll) and from
other contexts. dwceqos_start_xmit() only frees skbs that it has
dropped.

This is detected by Coccinelle semantic patch.

Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-20 14:47:52 -04:00
Eric Dumazet
286c72deab udp: must lock the socket in udp_disconnect()
Baozeng Ding reported KASAN traces showing uses after free in
udp_lib_get_port() and other related UDP functions.

A CONFIG_DEBUG_PAGEALLOC=y kernel would eventually crash.

I could write a reproducer with two threads doing :

static int sock_fd;
static void *thr1(void *arg)
{
	for (;;) {
		connect(sock_fd, (const struct sockaddr *)arg,
			sizeof(struct sockaddr_in));
	}
}

static void *thr2(void *arg)
{
	struct sockaddr_in unspec;

	for (;;) {
		memset(&unspec, 0, sizeof(unspec));
	        connect(sock_fd, (const struct sockaddr *)&unspec,
			sizeof(unspec));
        }
}

Problem is that udp_disconnect() could run without holding socket lock,
and this was causing list corruptions.

Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: Baozeng Ding <sploving1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-20 14:45:52 -04:00
Florian Fainelli
2399d6143f net: dsa: bcm_sf2: Prevent GPHY shutdown for kexec'd kernels
For a kernel that is being kexec'd we re-enable the integrated GPHY in
order for the subsequent MDIO bus scan to succeed and properly bind to
the bcm7xxx PHY driver. If we did not do that, the GPHY would be shut
down by the time the MDIO driver is probing the bus, and it would fail
to read the correct PHY OUI and therefore bind to an appropriate PHY
driver. Later on, this would cause DSA not to be able to successfully
attach to the PHY, and the interface would not be created at all.

Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-20 14:43:50 -04:00
Daniel Borkmann
0d906b1e8d bpf, test: fix ld_abs + vlan push/pop stress test
After commit 636c262808 ("net: skbuff: Remove errornous length
validation in skb_vlan_pop()") mentioned test case stopped working,
throwing a -12 (ENOMEM) return code. The issue however is not due to
636c262808, but rather due to a buggy test case that got uncovered
from the change in behaviour in 636c262808.

The data_size of that test case for the skb was set to 1. In the
bpf_fill_ld_abs_vlan_push_pop() handler bpf insns are generated that
loop with: reading skb data, pushing 68 tags, reading skb data,
popping 68 tags, reading skb data, etc, in order to force a skb
expansion and thus trigger that JITs recache skb->data. Problem is
that initial data_size is too small.

While before 636c262808, the test silently bailed out due to the
skb->len < VLAN_ETH_HLEN check with returning 0, and now throwing an
error from failing skb_ensure_writable(). Set at least minimum of
ETH_HLEN as an initial length so that on first push of data, equivalent
pop will succeed.

Fixes: 4d9c5c53ac ("test_bpf: add bpf_skb_vlan_push/pop() tests")
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-20 14:39:06 -04:00