Commit graph

661,541 commits

Author SHA1 Message Date
Wei Yongjun
ecc2d430fa memory: atmel-ebi: fix return value check in at91_ebi_dev_disable()
Fix the retrn value check which testing the wrong variable
in at91_ebi_dev_disable().

Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-10-20 11:59:22 +02:00
Neil Armstrong
211bc8c3e5 dt-bindings: reset: oxnas: Update for OX820
Add new compatible string for reset and sys-ctrl for the Oxford
Semiconductor OX820 Support.
Drop the OX810SE indices since they moved in a dedicated include file.

Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2016-10-20 11:55:14 +02:00
Neil Armstrong
8cc134a367 dt-bindings: reset: oxnas: Add include file with reset indexes
Add DT include file for Oxford Semiconductor OX810SE and OX820 reset
controller support.

Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2016-10-20 11:55:09 +02:00
Neil Armstrong
a68262bb1e reset: oxnas: Add OX820 support
In order to support the Oxford Semiconductor OX820 SoC, add a new
compatible string.

Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2016-10-20 11:54:55 +02:00
Peter Griffin
3bda1ed9ae reset: sti: softreset: Remove obsolete platforms from dt binding doc.
STiH415/6 SoC support is being removed from the kernel.
This patch updates the sti dt softreset bindings and
removes references to these obsolete platforms.

Signed-off-by: Peter Griffin <peter.griffin@linaro.org>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2016-10-20 11:52:48 +02:00
Peter Griffin
64933513e4 reset: sti: Remove STiH415/6 reset support
Support for STiH415/6 SoCs is being removed from the
kernel because the platforms are obsolete. This patch removes
the reset drivers for these SoC's.

Signed-off-by: Peter Griffin <peter.griffin@linaro.org>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2016-10-20 11:52:08 +02:00
Hui Wang
6aecd87158 ALSA: hda - Fix headset mic detection problem for two Dell laptops
They uses the codec ALC255, and have the different pin cfg definition
from the ones in the existing pin quirk table. Now adding them into
the table to fix the problem.

Cc: stable@vger.kernel.org
Signed-off-by: Hui Wang <hui.wang@canonical.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2016-10-20 11:47:23 +02:00
Rich Felker
3602ffdee9 irqchip/jcore: Don't show Kconfig menu item for driver
Core drivers for J-Core SoCs will be selected implicitly via
CONFIG_SH_JCORE_SOC instead. Based on a corresponding change to the
clocksource/timer driver requested by Daniel Lezcano.

Signed-off-by: Rich Felker <dalias@libc.org>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Cc: Jason Cooper <jason@lakedaemon.net>
Cc: linux-sh@vger.kernel.org
Link: http://lkml.kernel.org/r/883a3d17084003e3cf21bab73ec12828fe4ff6c6.1476899495.git.dalias@libc.org
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-10-20 11:43:58 +02:00
Du, Changbin
19e6393fb5 drm/i915/gvt: do not ignore return value of create_scratch_page
Function create_scratch_page() may fail in some cases.

Signed-off-by: Du, Changbin <changbin.du@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
2016-10-20 17:31:36 +08:00
Du, Changbin
76a79d59ad drm/i915/gvt: fix spare warnings on odd constant _Bool cast
The function return values should has type int if it return
a integer value.

Signed-off-by: Du, Changbin <changbin.du@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
2016-10-20 17:31:36 +08:00
Du, Changbin
999ccb4017 drm/i915/gvt: mark symbols static where possible
Mark all local functions & variables as static.

Signed-off-by: Du, Changbin <changbin.du@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
2016-10-20 17:31:36 +08:00
Du, Changbin
321927db98 drm/i915/gvt: fix sparse warnings on different address spaces
Add proper __iomem annotation for pointers obtained via ioremap().

Signed-off-by: Du, Changbin <changbin.du@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
2016-10-20 17:31:35 +08:00
Zhenyu Wang
0fac21e7e9 drm/i915/gvt: properly access enabled intel_engine_cs
Switch to use new for_each_engine() helper to properly access
enabled intel_engine_cs as i915 core has changed that to be
dynamic managed. At GVT-g init time would still depend on ring
mask to determine engine list as it's earlier.

Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
2016-10-20 17:31:35 +08:00
Chris Wilson
3eec872207 drm/i915/gvt: Remove defunct vmap_batch()
This code was removed from i915_cmd_parser.c but still an obsolete
version wound up being duplicated into gvt/cmd_parser.c. Good riddance.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
2016-10-20 17:31:35 +08:00
Chris Wilson
a28615041e drm/i915/gvt: Use common mapping routines for shadow_bb object
We have the ability to map an object, so use it rather than opencode it
badly. Note that the object remains permanently pinned, this is poor
practise.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
2016-10-20 17:31:34 +08:00
Chris Wilson
bcd0aeded4 drm/i915/gvt: Use common mapping routines for indirect_ctx object
We have the ability to map an object, so use it rather than opencode it
badly.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
2016-10-20 17:31:34 +08:00
Chris Wilson
66bbc3b2b1 drm/i915/gvt: Stop waiting whilst holding struct_mutex
For whatever reason, the gvt scheduler runs synchronously. At the very
least, lets run synchronously without holding the struct_mutex.

v2: cut'n'paste mutex_lock instead of unlock.
Replace long hold of struct_mutex with a mutex to serialise the worker
threads.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
2016-10-20 17:31:34 +08:00
Chris Wilson
f460c251ea drm/i915/gvt: Stop checking for impossible interrupts from a kthread
The kthread will not be interrupted, don't even bother checking.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
2016-10-20 17:31:33 +08:00
Chris Wilson
0eb742d7af drm/i915/gvt: Hold a reference on the request
The workload took a pointer to the request, and even waited upon,
without holding a reference on the request. Take that reference
explicitly and fix up the error path following request allocation that
missed flushing the request.

v2: [zhenyuw]
- drop request put in error path for dispatch, as main thread
caller will handle it identically to a real request.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
2016-10-20 17:29:36 +08:00
Chris Wilson
eeacd86efa drm/i915/gvt: Remove dangerous unpin of backing storage of bound GPU object
Unpinning the pages prior to the object being release from the GPU may
allow the GPU to read and write into system pages (i.e. use after free
by the hw).

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
2016-10-20 17:18:40 +08:00
Chris Wilson
b6d891429d drm/i915/gvt: Use the returned VMA to provide the virtual address
The purpose of returning the just-pinned VMA is so that we can use the
information within, like its address. Also it should be tracked and used
as the cookie to unpin...

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
2016-10-20 17:18:40 +08:00
Chris Wilson
894cf7d156 drm/i915/gvt: i915_gem_object_create() returns an error pointer
On failure from i915_gem_object_create(), we need to check for an error
pointer not NULL.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
2016-10-20 17:18:39 +08:00
Chris Wilson
75ea10da06 drm/i915/gvt: Add runtime pm around fences
Manipulating the fence_list requires the runtime wakelock, as does
writing to the fence registers. Acquire a wakelock for the former, and
assert that the device is awake for the latter.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
2016-10-20 17:18:39 +08:00
Zhenyu Wang
22681c7bc7 Documentation/gpu: Add section for Intel GVT-g host support
Update with brief overview and reference for more detailed
arch design documents.

Add new section for Intel GVT-g host support.

Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
2016-10-20 17:18:39 +08:00
Zhenyu Wang
bbc3693351 drm/i915/gvt: Fix warning on obsolete function usage
Don't use obsolete drm_gem_object_unreference() but switch to i915_gem_object_put().

Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
2016-10-20 17:18:38 +08:00
Zhenyu Wang
66a46e9df0 MAINTAINERS: Add new Intel GVT-g driver maintainer
This adds new item for Intel GVT-g driver maintainer info.

Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
2016-10-20 17:18:38 +08:00
Zhenyu Wang
feddf6e866 drm/i915/gvt: clean up intel_gvt.h as interface for i915 core
i915 core should only call functions and structures exposed through
intel_gvt.h. Remove internal gvt.h and i915_pvinfo.h.

Change for internal intel_gvt structure as private handler which
not requires to expose gvt internal structure for i915 core.

v2: Fix per Chris's comment
- carefully handle dev_priv->gvt assignment
- add necessary bracket for macro helper
- forward declartion struct intel_gvt
- keep free operation within same file handling alloc

v3: fix use after free and remove intel_gvt.initialized

v4: change to_gvt() to an inline

Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
2016-10-20 17:18:30 +08:00
Johan Hovold
de24e0a108 USB: serial: cp210x: fix tiocmget error handling
The current tiocmget implementation would fail to report errors up the
stack and instead leaked a few bits from the stack as a mask of
modem-status flags.

Fixes: 39a66b8d22 ("[PATCH] USB: CP2101 Add support for flow control")
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
2016-10-20 11:15:20 +02:00
James Morse
d08544127d arm64: suspend: Reconfigure PSTATE after resume from idle
The suspend/resume path in kernel/sleep.S, as used by cpu-idle, does not
save/restore PSTATE. As a result of this cpufeatures that were detected
and have bits in PSTATE get lost when we resume from idle.

UAO gets set appropriately on the next context switch. PAN will be
re-enabled next time we return from user-space, but on a preemptible
kernel we may run work accessing user space before this point.

Add code to re-enable theses two features in __cpu_suspend_exit().
We re-use uao_thread_switch() passing current.

Signed-off-by: James Morse <james.morse@arm.com>
Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
2016-10-20 09:50:54 +01:00
James Morse
7209c86860 arm64: mm: Set PSTATE.PAN from the cpu_enable_pan() call
Commit 338d4f49d6 ("arm64: kernel: Add support for Privileged Access
Never") enabled PAN by enabling the 'SPAN' feature-bit in SCTLR_EL1.
This means the PSTATE.PAN bit won't be set until the next return to the
kernel from userspace. On a preemptible kernel we may schedule work that
accesses userspace on a CPU before it has done this.

Now that cpufeature enable() calls are scheduled via stop_machine(), we
can set PSTATE.PAN from the cpu_enable_pan() call.

Add WARN_ON_ONCE(in_interrupt()) to check the PSTATE value we updated
is not immediately discarded.

Reported-by: Tony Thompson <anthony.thompson@arm.com>
Reported-by: Vladimir Murzin <vladimir.murzin@arm.com>
Signed-off-by: James Morse <james.morse@arm.com>
[will: fixed typo in comment]
Signed-off-by: Will Deacon <will.deacon@arm.com>
2016-10-20 09:50:53 +01:00
James Morse
2a6dcb2b5f arm64: cpufeature: Schedule enable() calls instead of calling them via IPI
The enable() call for a cpufeature/errata is called using on_each_cpu().
This issues a cross-call IPI to get the work done. Implicitly, this
stashes the running PSTATE in SPSR when the CPU receives the IPI, and
restores it when we return. This means an enable() call can never modify
PSTATE.

To allow PAN to do this, change the on_each_cpu() call to use
stop_machine(). This schedules the work on each CPU which allows
us to modify PSTATE.

This involves changing the protype of all the enable() functions.

enable_cpu_capabilities() is called during boot and enables the feature
on all online CPUs. This path now uses stop_machine(). CPU features for
hotplug'd CPUs are enabled by verify_local_cpu_features() which only
acts on the local CPU, and can already modify the running PSTATE as it
is called from secondary_start_kernel().

Reported-by: Tony Thompson <anthony.thompson@arm.com>
Reported-by: Vladimir Murzin <vladimir.murzin@arm.com>
Signed-off-by: James Morse <james.morse@arm.com>
Cc: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
2016-10-20 09:50:53 +01:00
Andre Przywara
87261d1904 arm64: Cortex-A53 errata workaround: check for kernel addresses
Commit 7dd01aef05 ("arm64: trap userspace "dc cvau" cache operation on
errata-affected core") adds code to execute cache maintenance instructions
in the kernel on behalf of userland on CPUs with certain ARM CPU errata.
It turns out that the address hasn't been checked to be a valid user
space address, allowing userland to clean cache lines in kernel space.
Fix this by introducing an address check before executing the
instructions on behalf of userland.

Since the address doesn't come via a syscall parameter, we can't just
reject tagged pointers and instead have to remove the tag when checking
against the user address limit.

Cc: <stable@vger.kernel.org>
Fixes: 7dd01aef05 ("arm64: trap userspace "dc cvau" cache operation on errata-affected core")
Reported-by: Kristina Martsenko <kristina.martsenko@arm.com>
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
[will: rework commit message + replace access_ok with max_user_addr()]
Signed-off-by: Will Deacon <will.deacon@arm.com>
2016-10-20 09:50:49 +01:00
Jacob Siverskog
6add49fff9 Bluetooth: btwilink: Fix probe return value
Probe functions should return 0 on success. This driver's probe
returns the value returned by hci_register_dev(), which is the hci
index. This works for systems with only one hci device (id = 0) but
for systems where the btwilink device ends up with an id larger than
0, things will start to fall apart.

Make the probe function return 0 on success.

Signed-off-by: Jacob Siverskog <jacob@teenage.engineering>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2016-10-20 10:14:49 +02:00
Jason Gerecke
c0bf57411b HID: input: Recognize ABS_WHEEL in hidinput_calc_abs_res
The "Steering" usage (HID_UP_SIMULATION | 0xc8) is defined in HUT 1.12 as
follows:

"A steering wheel is a single degree-of-freedom device that rotates about
an axis. The zero position is always the neutral or 'straight ahead'
position, with positive values turning clockwise and negative values
turning counterclockwise. If the Coordinate Values Wrap attribute is
set, the steering wheel can be turned past 360 degrees."

The hidinput_configure_usage function canonically maps this usage to the
ABS_WHEEL axis, but hidinput_calc_abs_res does not recognize this axis
as one for which it can calculate a resolution. This effectively prevents
wheels from being assigned a proper resolution that userspace can use
to determine the precise angle of input.

This commit adds ABS_WHEEL as a rotational axis to hidinput_calc_abs_res.

Signed-off-by: Jason Gerecke <jason.gerecke@wacom.com>
Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2016-10-20 09:54:01 +02:00
Jason Gerecke
bf78adcb6d HID: wacom: generic: Extend pad support
The HID specification that the MobileStudio Pro follows includes usages
for several values that would be good to support so that future devices
"just work" out of the box. Extend the HID_GENERIC pad codepath to handle
these usages.

Signed-off-by: Jason Gerecke <jason.gerecke@wacom.com>
Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2016-10-20 09:54:01 +02:00
Jason Gerecke
93aab7fa4f HID: wacom: generic: Add support for battery status on pen and pad interfaces
Adds support for usages that may appear on the pen or pad interface which
report the state of the tablet battery.

Signed-off-by: Jason Gerecke <jason.gerecke@wacom.com>
Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2016-10-20 09:54:00 +02:00
Jason Gerecke
5922e61325 HID: wacom: generic: Introduce pad support
As with usages for the pen, the Custom HID specificiation includes
usages for the pad. Here we add functions to map and handle most
of the pad usages present on the MobileStudio Pro.

Signed-off-by: Jason Gerecke <jason.gerecke@wacom.com>
Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2016-10-20 09:54:00 +02:00
Jason Gerecke
345857bb49 HID: wacom: generic: Add support for sensor offsets
Many of Wacom's display tablets include an "outbound" area where pen
digitizing is possible but outside of the display area. To accommodate
such sensors in the HID_GENERIC codepath, we add support for the
necessary vendor-defined HID feature usages and adjust the min/max
values of the X and Y axes accordingly, similar to what is done in
the non-generic codepath.

Signed-off-by: Jason Gerecke <jason.gerecke@wacom.com>
Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2016-10-20 09:54:00 +02:00
Jason Gerecke
e779ef2310 HID: wacom: Fix sensor outbounds and redefine as offsets from each edge
Many of Wacom's display tablets include an "outbound" area where pen
digitizing is possible but outside of the display area. To ensure that
pen coordinates are mapped to the correct on-screen location, the driver
sets the minimum and maximum axis values of X and Y to those coordinates
which coincide with the screen edge. These values are simply the
hardware minimum/maximum plus/minus the outbound size for a particular
edge.

When outbound support was added/updated in ac414da, fa77034, and
ecd618d, we decided to have the wacom_features structs store the desired
minimum and maximum values directly. In hindsight, this was perhaps not
the best choice since it has allowed minor errors to crop up unnoticed.
Some tablets have had their coordinates over-corrected (e.g. most of the
devices "fixed" in ecd618d were already adjusted in ac414da), while
others never had a correction applied (e.g. the ISDv5 325, whose
declared maximum the hardware maximum instead of the outbound maximum).

A less error-prone method of handling the outbound is to let the driver
calculate the correct minimum/maximum values by providing it with both
the actual hardware maximums and the size of the outbound on each edge.
These values are more easy to verify as correct since the values can be
trivially compared against specifications.

This patch reverts the declared maximum values to the actual hardware
maximums, e.g. as declared prior to ac414da (values for these and other
display tablets that were subsuquently introduced have been verified
against specs). Per-edge outbound sizes are stored in the wacom_features
struct as offset_{left,right,top,bottom} and used in combination with
the hardware ranges to calculate effective axis ranges for ABS_X and
ABS_Y.

Signed-off-by: Jason Gerecke <jason.gerecke@wacom.com>
Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2016-10-20 09:53:59 +02:00
Jason Gerecke
f85c9dc678 HID: wacom: generic: Support tool ID and additional tool types
Devices following the new Custom HID mode specification (as well as even
some recent component sensors which use the same standard HID usage)
are capable of reporting tool ID information that we need to relay to
userspace. This patch adds support for reading and relaying the tool
type information, which is (unfortunately) split across two usages.
We also advertise the existence of tool types beyond BTN_TOOL_PEN
that might be available.

Signed-off-by: Jason Gerecke <jason.gerecke@wacom.com>
Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2016-10-20 09:53:59 +02:00
Jason Gerecke
82527da319 HID: wacom: Read and internally use corrected Intuos tool IDs
The 'wacom_intuos_inout' function incorrectly assmebles tool IDs from the
proximity report, shifting the higher values of the ID four bits farther
than intended. This problem was not detected until too late, but has not
caused any issues since the incorrect IDs still fit in a 32-bit integer
and userspace programs have not required the value to match the hardware
(just that the values are unique and constant).

The tool IDs reported by the new MobileStudio Pro (or any future
HID_GENERIC device that supports them) do not suffer from the same
assembly issue, however. In order for 'wacom_intuos_get_tool_type' to
work for with both codepaths, we correct this issue internally and
have 'wacom_intuos_general' only mangle the ID when it is posted to
userspace.

Signed-off-by: Jason Gerecke <jason.gerecke@wacom.com>
Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2016-10-20 09:53:58 +02:00
Jason Gerecke
61ce346a21 HID: wacom: generic: Add support for vendor-defined "Sense" usage
Wacom's professional tablets beginning with the Intuos4 are capable of
reporting an intermediate degree of proximity where the pen is no longer
close enough to communicate with ("in prox"), but still close enough to
be sensed ("in range"). This additional state is particularly useful for
performing palm rejection as it allows the driver to disable the touch
sensor while the pen is a greater distance from the tablet.

Like other professional tablets, the new MobileStudio Pro also reports
this intermeidate "in range" proximity state. Its descriptor assigns
usage 0xff0d0036 to this bit. Normally 'wacom_equivalent_usage' would
translate this to the standard HID "Quality" usage, but since this has
a different meaning we have it explicitly ignore the usage and define
it ourselves as "Sense" (since "In Range" is already defined by the
HID standard and interpreted by our driver as meaning "in prox").

Signed-off-by: Jason Gerecke <jason.gerecke@wacom.com>
Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2016-10-20 09:53:58 +02:00
Jason Gerecke
929d6d5d22 HID: wacom: generic: Add support for vendor-defined "Fingerwheel" usage
The airbrush fingerwheel does not have a usage that corresponds cleanly
with a standard HID usage, so we add explicit support for it via its
vendor-defined usage.

Signed-off-by: Jason Gerecke <jason.gerecke@wacom.com>
Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2016-10-20 09:53:58 +02:00
Jason Gerecke
b5c921e6c3 HID: wacom: generic: Add support for vendor-defined "Distance" usage
The vendor-defined 0xFF0D01032 ("Distance") usage is nearly equivalent to
HID_GD_Z, except that the axis direction is inverted. Unlike HID_GD_Z which
increases in value as the pen-to-surface distance is decreased, this usage
decreases. Treat this usage as a special case to ensure we don't invert the
scale to be ABS_DISTANCE compatible like we do for HID_GD_Z.

Signed-off-by: Jason Gerecke <jason.gerecke@wacom.com>
Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2016-10-20 09:53:57 +02:00
Jason Gerecke
c9c095874a HID: wacom: generic: Support and use 'Custom HID' mode and usages
Wacom's new "MobileStudio Pro" tablets are the first devices in their
branded product line-up to include a usable HID descriptor for the pen
interface. Like prior branded products, the device can operate in one
of two modes: 'Standard HID', and 'Wacom Custom HID'. Although the
first mode is usable by the HID_GENERIC codepath as-is (huzzah!), it is
subject to some restrictions -- most notably pressure being limited
to 2048 levels instead of 8192. To ensure tablets that include support
for Custom HID mode work optimally, we add support for its usages and
switch the device to Custom HID mode if possible.

The usages defined for Custom HID mode are often numerically similar to
their standard HID equivalents, allowing us to write a simple translation
function that takes arbitrary HID usages as input and which returns
the corresponding standard HID usage as output (if one exists). Switching
on this translated usage instead of the actual usage allows the existing
cases to apply to both modes of operation without having to explicitly
define every Custom HID usage.

Signed-off-by: Jason Gerecke <jason.gerecke@wacom.com>
Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2016-10-20 09:53:57 +02:00
Jason Gerecke
50066a042d HID: wacom: generic: Add support for height, tilt, and twist usages
The HID standard defines usages that allow digitizers to report the pen's
height, tilt, and rotation and which are used by Wacom's new "MobileStudio
Pro" devices.

Note that 'hidinput_calc_abs_res' expects ABS_Z (historically used by our
driver to report twist) to have linear units. To ensure it calculates a
resolution with the actually-angular units provided in the HID descriptor
we nedd to lie and tell it we're calculating it for the (rotational) ABS_RZ
axis instead.

Signed-off-by: Jason Gerecke <jason.gerecke@wacom.com>
Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2016-10-20 09:53:56 +02:00
Jason Gerecke
f2209d4aef HID: wacom: generic: Strip off excessive name prefixing
The product name received from the string descriptor in the new MobileStudio
Pro line of tablets begins with "Wacom", which leads to unnecessary visual
noise in the device name when appended to the vendor name which also includes
"Wacom". Look for and fix cases like this.

Signed-off-by: Jason Gerecke <jason.gerecke@wacom.com>
Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2016-10-20 09:53:56 +02:00
Jason Gerecke
6005a13c90 HID: wacom: Detect and correct descriptors missing HID_DG_BARRELSWITCH2
ISDv4 devices have long supported reporting data from each of two barrel
switches, but HID_DG_BARRELSWITCH2 itself was only recently standardized.
Prior to its adoption, ISDv4 devices would associate the bit indicating
the state of the second barrel switch with the "Undefined" 0x000D0000
usage. Although most such devices have explicit support, a few use the
HID_GENERIC codepath which ignores the "Undefined" usage.

This patch adds code which detects the presence of a pre-standard second
barrel switch and corrects the usage value so that the HID_GENERIC code
will declare its presence and report its state.

Signed-off-by: Jason Gerecke <jason.gerecke@wacom.com>
Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2016-10-20 09:53:56 +02:00
Jason Gerecke
49005b9fd0 HID: wacom: Refactor button-to-key translation into function
This just centralizes the logic used in both wacom_setup_numbered_buttons
and wacom_report_numbered_buttons so that they don't drift out of sync.

Signed-off-by: Jason Gerecke <jason.gerecke@wacom.com>
Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2016-10-20 09:53:55 +02:00
Jason Gerecke
1b18b75c7e HID: wacom: Have WACOM_PEN_FIELD and WACOM_FINGER_FIELD recgonize more fields
We've defined several new usages (e.g. WACOM_G9_PEN and WACOM_G9_TOUCHSCREEN)
which aren't checked by the WACOM_PEN_FIELD and WACOM_FINGER_FIELD macros but
probably should be.

Signed-off-by: Jason Gerecke <jason.gerecke@wacom.com>
Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2016-10-20 09:53:55 +02:00