Failures in ll_ioc_copy_{start,end} are reported to coordinator.
The return code delivered to the caller should indicate what this
error was, not whether coordinator was successfully notified.
Signed-off-by: Henri Doreau <henri.doreau@cea.fr>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-5683
Reviewed-on: http://review.whamcloud.com/14335
Reviewed-by: Jinshan Xiong <jinshan.xiong@intel.com>
Reviewed-by: John L. Hammond <john.hammond@intel.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Some old protocol compatibility workarounds are still present in
master that should have been removed when LUSTRE_MSG_MAGIC_V1 was.
In particular, the process for upgrading LUSTRE_MSG_MAGIC_V1 to
LUSTRE_MSG_MAGIC_V2 had the client to connect to the server with the
V1 protocol with op_flag=MSG_CONNECT_NEXT_VER set, and if the server
supported the V2 protocol it would reply with LUSTRE_MSG_MAGIC_V2.
This ensured that if the new client connected to an old server the
connection would be allowed. However, even with V1 protocol support
removed, the 2.x clients are still connecting with NEXT_VER set.
In b1_8 this flag was contingent on LUSTRE_MSG_MAGIC_V1 being used,
which is how it should have been in 2.x as well.
A few other cleanups are be done at the same time:
- disallow 1.8 clients (or at least those that don't understand
OBD_CONNECT_FULL20) so we can remove workarounds for 1.8 clients
- remove support for pre-2.1 DLM flock lock handling
- don't workaround the lack of MDS_ATTR_xTIME_SET flags in setattr
- always set MSGHDR_CKSUM_INCOMPAT18 (it can eventually be removed)
Signed-off-by: Andreas Dilger <andreas.dilger@intel.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-6349
Reviewed-on: http://review.whamcloud.com/14006
Reviewed-by: James Simmons <uja.ornl@yahoo.com>
Reviewed-by: Dmitry Eremin <dmitry.eremin@intel.com>
Reviewed-by: John L. Hammond <john.hammond@intel.com>
Reviewed-by: Liang Zhen <liang.zhen@intel.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Currently, the CBPENDING flag is set on group locks when
the osc lock above them is released (osc_cancel_base).
This results in a situation where a new group lock request
on a resource does not match an existing group lock because
LDLM_FL_CBPENDING is set on the existing lock.
So two group locks are granted on the same resource, which
is not valid, since a given client can only have one group
lock on a particular resource.
Since group locks are manually released and not called back
like other LDLM locks, the CBPENDING flag doesn't make
sense. Since they must be manually released, they also
cannot go in the LDLM LRU cache and must be fully released
immediately once they are no longer in use.
This was previously accomplished by setting CBPENDING when
the corresponding osc lock is released, but as noted above,
this prevents the group lock matching some future lock
requests.
This patch uses the fact that group locks have an l_writers
reference which they keep until they are manually released,
so we remove them when they have no more reader or writer
references, without checking cbpending.
Signed-off-by: Patrick Farrell <paf@cray.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-6368
Reviewed-on: http://review.whamcloud.com/14093
Reviewed-by: frank zago <fzago@cray.com>
Reviewed-by: Jinshan Xiong <jinshan.xiong@intel.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
After setting like "lctl set_param -P osc.*.max_pages_per_rpc", it
is possible that the function osc_obd_max_pages_per_rpc_seq_write
will be called before ocd_brw_size has been set when mount.
ocd_brw_size is meaningless when it is zero. So it should not be
the limit at that time.
Signed-off-by: Wu Libin <lwu@ddn.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-6421
Reviewed-on: http://review.whamcloud.com/14333
Reviewed-by: Emoly Liu <emoly.liu@intel.com>
Reviewed-by: Bobi Jam <bobijam@hotmail.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The new tag field is used as a virtual index for multiple modifying
RPCs management. It is set by the client and allows the target to
release in-memory reply data when the tag is reused by a new RPC.
The tag field replaces the unused last_seen field of ptlrpcd_body
structure.
Additionally, the last_xid field is used to transfer the highest XID
for which a reply has been received and does not have an unreplied
lower-numbered XID.
Signed-off-by: Gregoire Pichon <gregoire.pichon@bull.net>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-5319
Reviewed-on: http://review.whamcloud.com/14095
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Reviewed-by: Alex Zhuravlev <alexey.zhuravlev@intel.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add handling of inode flags to the handlers of CIT_SETATTR in lov and
osc. In the FSFILT_IOC_SETFLAGS case of ll_iocontrol() use
cl_setattr_ost() rather than obd_setattr_rqset() to set inode flags on
OST objects. Remove the then unused OBD API methods
obd_setattr_rqset() and obd_setattr_async() along with their
supporting functions.
Signed-off-by: John L. Hammond <john.hammond@intel.com>
Signed-off-by: Jinshan Xiong <jinshan.xiong@intel.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-5823
Reviewed-on: http://review.whamcloud.com/13422
Reviewed-by: Bobi Jam <bobijam@hotmail.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The new OBD_CONNECT_MULTIMODRPCS connection flag indicates the support
of multiple modify RPCs in parallel. It can be specified by the client
within the connection request and by the server within the connection
reply. The new ocd_maxmodrpcs connection data specifies the maximum modify
RPCs in parallel supported by the server.
To allow the MDS to send the new ocd_maxmodrpcs field, it has been
required to modify RMF_CONNECT_DATA so that its size includes the new
field. This change leads to remove the ocd_connect_data_v1 structure.
Note that the client has been allocating an extra 16*sizeof(__u64) for
the obd_connect_data reply since 2.0 and even in later versions of 1.8)
so there is no problem for the MDS to just send the full reply size.
This patch fixes a bug in __req_capsule_get() since it wasn't checking
RMF_F_NO_SIZE_CHECK when receiving the message. This allows legacy
clients (with version lower that this commit) to send connection
request with ocd_connect_data structure size smaller (actually size is
ocd_connect_data_v1 structure size) than new server ocd_connect_data
structure size.
This patch also fixes a bug in the routine that displays the import's
connect data.
Signed-off-by: Gregoire Pichon <gregoire.pichon@bull.net>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-5319
Reviewed-on: http://review.whamcloud.com/#/c/13960
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Reviewed-by: Alex Zhuravlev <alexey.zhuravlev@intel.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
If user wants to create CPT table that can match numa topology,
she has to query cpu & numa topology, then provide a pattern
string to describe the topology, this is inconvenient.
To improve it, this patch can support shortcut expression "N" or "n"
to create CPT table from NUMA & CPU topology
Signed-off-by: Liang Zhen <liang.zhen@intel.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-6325
Reviewed-on: http://review.whamcloud.com/14049
Reviewed-by: Olaf Weber <olaf@sgi.com>
Reviewed-by: Bobi Jam <bobijam@hotmail.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Default dir stripe index should only work during mkdir,
otherwise it will cause other open/create request being
sent to the wrong MDT.
Signed-off-by: wang di <di.wang@intel.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-6373
Reviewed-on: http://review.whamcloud.com/14096
Reviewed-by: Alex Zhuravlev <alexey.zhuravlev@intel.com>
Reviewed-by: Fan Yong <fan.yong@intel.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Return -ECONNREFUSED instead of -ENOMEM in sptlrpc_req_get_ctx()
if no context is found in req. It is more graceful.
Signed-off-by: Sebastien Buisson <sebastien.buisson@bull.net>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-6356
Reviewed-on: http://review.whamcloud.com/14043
Reviewed-by: Dmitry Eremin <dmitry.eremin@intel.com>
Reviewed-by: Andrew Perepechko <andrew.perepechko@seagate.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
A lot of symbols don't need to be exported at all because they are
only used in the module they belong to.
Signed-off-by: frank zago <fzago@cray.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-5829
Reviewed-on: http://review.whamcloud.com/13324
Reviewed-by: James Simmons <uja.ornl@gmail.com>
Reviewed-by: John L. Hammond <john.hammond@intel.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In this implementation, read ahead will hold the underlying DLM lock
to add read ahead pages. A new cl_io operation cio_read_ahead() is
added for this purpose. It takes parameter cl_read_ahead{} so that
each layer can adjust it by their own requirements. For example, at
OSC layer, it will make sure the read ahead region is covered by a
LDLM lock; at the LOV layer, it will make sure that the region won't
cross stripe boundary.
Legacy callback cpo_is_under_lock() is removed.
Signed-off-by: Jinshan Xiong <jinshan.xiong@intel.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-3259
Reviewed-on: http://review.whamcloud.com/10859
Reviewed-by: John L. Hammond <john.hammond@intel.com>
Reviewed-by: Bobi Jam <bobijam@hotmail.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Remove the unused OBD MD API method md_done_writing(). Remove the
unused logcookie and struct md_open_data ** parameters from
md_setattr(). Remove the unused functions iattr_from_obdo(),
md_from_obdo(), and obdo_refresh_inode().
Signed-off-by: John L. Hammond <john.hammond@intel.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-6047
Reviewed-on: http://review.whamcloud.com/13169
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Reviewed-by: Jinshan Xiong <jinshan.xiong@intel.com>
Reviewed-by: Henri Doreau <henri.doreau@cea.fr>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Size on MDS support have been in preview since at least 2.0.0. Remove
support for it from lustre/llite/.
Signed-off-by: John L. Hammond <john.hammond@intel.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-6047
Reviewed-on: http://review.whamcloud.com/13126
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Reviewed-by: Lai Siyao <lai.siyao@intel.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When unloading a module, it may happen that lu_context_key_degister()
removes a key while a thread is either registering it in a new
context (lu_context_init(), lu_context_refill()), or using it when
exiting from a context (lu_context__exit(), lu_context__fini()).
In these cases, we reference a key which no longer exists, and
the system crashes either because we use a *POISON'ed* pointer
in key_fini() -> key->lct_fini(), or because one of the following
assertions fails:
- lu_context_key_degister():
ASSERTION(cfs_atomic_read(&key->lct_used) == 1)
failed: key has instances: 2
- lu_context_exit():
ASSERTION(key != NULL)
- key_fini():
ASSERTION(atomic_read(&key->lct_used) > 1)
This can also leads to SLAB objects which are not freed:
slab error in kmem_cache_destroy(): cache `echo_thread_kmem':
Can't free all objects
Note: ptlrpc service threads need to call lu_context_init/fini in
each loop (for each RPC), and this could be a big performance issue
on fat SMP machines if we add serialization by a spinlock and need
to lock/unlock it for multiple times for each RPC.
So the aim of this patch, which only impacts some low frequently used
functions, is:
1) to add a synchronization in lu_context_key_quiesce(), also called
by lu_context_key_degister(), to wait until all key::lct_init()
methods have completed, by serializing with keys_fill()
2) to add a synchronization in lu_context_key_degister(), to wait
until all transient contexts referencing this key have run
key::lct_fini() method
Signed-off-by: Patrick Valentin <patrick.valentin@bull.net>
Signed-off-by: Gregoire Pichon <gregoire.pichon@bull.net>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-6049
Reviewed-on: http://review.whamcloud.com/13164
Reviewed-by: Fan Yong <fan.yong@intel.com>
Reviewed-by: Alex Zhuravlev <alexey.zhuravlev@intel.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Upon umount, presumably of last device using same OSD back-end,
to prepare for module unload, lu_context_key_quiesce() is run to
remove all module's key reference in any context linked on
lu_context_remembered list.
Threads must protect against such transversal processing when
exiting from its context.
Signed-off-by: Bruno Faccini <bruno.faccini@intel.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-5264
Reviewed-on: http://review.whamcloud.com/13103
Reviewed-by: Mike Pershin <mike.pershin@intel.com>
Reviewed-by: Alex Zhuravlev <alexey.zhuravlev@intel.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Remove function remote_event_destroy as it is not used anywhere in the
kernel. Function detected using Coccinelle but changes done by hand.
Script:
@initialize:python@
@@
def display(name,p):
print(name,p[0].file)
@r1@
identifier func;
type T;
position p;
@@
static T func@p(...)
{
...
}
@r@
identifier r1.func;
@@
func
@script:python depends on !r@
func << r1.func;
p << r1.p;
@@
display(func,p)
Signed-off-by: Bhumika Goyal <bhumirks@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add a blank line after a declaration. Error found by checkpatch.
Signed-off-by: Elizabeth Ferdman <gnudevliz@gmail.com>
Reviewed-by: Vaibhav Agarwal <vaibhav.sr@gmail.com>
Reviewed-by: Mark Greer <mgreer@animalcreek.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch fix the coding style problem of block comment detected by the
checkpatch.pl.
WARNING: Block comments use a trailing */ on a separate line
Signed-off-by: Hisao Tanabe <xtanabe@gmail.com>
Acked-by: Johan Hovold <johan@kernel.org>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch fixes a WARNING: Prefer 'unsigned int' to bare use of
'unsigned', found by checkpatch.pl. By fixing this the types of the parameters of the function become more explicit.
Signed-off-by: Muraru Mihaela <mihaela.muraru21@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch fixes the checkpatch.pl warning: "WARNING: do not add new
typedefs". Hiding a variables of type 'struct' is not always a good
idea,because when we passing them as parameters we tempt to forget that
in this proces we work with stack memory and allocatting struct on
stack is something that we should manage carefuly.
It is also delete the '_t' from the name of the structs and treat a line
over 80 character issue in ddk750_mode.c, that appear after my modification.
Signed-off-by: Mihaela Muraru <mihaela.muraru21@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This comes from the downstream tree and is needed for the new VCHIQ
driver in staging.
Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Recently objtool has started reporting a few "unreachable instruction"
warnings when CONFIG_GCOV is enabled for newer versions of GCC. Usually
this warning means there's some new control flow that objtool doesn't
understand. But in this case, objtool is correct and the instructions
really are inaccessible. It's an annoying quirk of gcov, but it's
harmless, so it's ok to just silence the warnings.
With older versions of GCC, it was relatively easy to detect
gcov-specific instructions and to skip any unreachable warnings produced
by them. But GCC 6 has gotten craftier.
Instead of continuing to play whack-a-mole with gcov, just use a bigger,
more permanent hammer and disable unreachable warnings for the whole
file when gcov is enabled. This is fine to do because a) unreachable
warnings are usually of questionable value; and b) gcov isn't used for
production kernels and we can relax the checks a bit there.
Reported-by: kbuild test robot <fengguang.wu@intel.com>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/38d5c87d61d9cd46486dd2c86f46603dff0df86f.1476393584.git.jpoimboe@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
GCC 6 added a new switch statement jump table optimization which makes
objtool's life harder. It looks like:
mov [rodata addr],%reg1
... some instructions ...
jmpq *(%reg1,%reg2,8)
The optimization is quite rare, but objtool still needs to be able to
identify the pattern so that it can follow all possible control flow
paths related to the switch statement.
In order to detect the pattern, objtool starts from the indirect jump
and scans backwards through the function until it finds the first
instruction in the pattern. If it encounters an unconditional jump
along the way, it stops and considers the pattern to be not found.
As it turns out, unconditional jumps can happen, as long as they are
small forward jumps within the range being scanned.
This fixes the following warnings:
drivers/infiniband/sw/rxe/rxe_comp.o: warning: objtool: rxe_completer()+0x2f4: sibling call from callable instruction with changed frame pointer
drivers/infiniband/sw/rxe/rxe_resp.o: warning: objtool: rxe_responder()+0x10f: sibling call from callable instruction with changed frame pointer
Reported-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/8a9ed68ae1780e8d3963e4ee13f2f257fe3a3c33.1476393584.git.jpoimboe@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
px5-evb has one sdmmc slot, so we could support sdmmc.
Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
The emmc on px5-evb can support hs200, so let's add mmc-hs200-1_8v.
And in order to speed up the boot time, we could add no-sdio and
no-sd to simplify the initialization.
Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
PX5 EVB is designed by Rockchip for automotive field
with integrated CVBS (TP2825) / MIPI DSI / CSI / LVDS
HDMI video input/output interface, audio codec ES8396,
WIFI/BT (on RTL8723BS), Gsensor BMA250E and light&proximity
sensor STK3410.
Signed-off-by: Andy Yan <andy.yan@rock-chips.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
The tcpc power domain will try to power up/down the power of Type-C PHY.
Hence, we need control it in Type-C PHY driver with the pm_runtime helper.
Signed-off-by: Chris Zhong <zyw@rock-chips.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
According to the TRM and downstream code from rockchip, the register
address of i2c1 on rk3368 is 0xff660000 and i2c2 is 0xff140000.
This patch fix the i2c1 & i2c2 register address definition error, also
fix the clk and pinctrl reference error.
Signed-off-by: Andy Yan <andy.yan@rock-chips.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Enable these two modes to speed up the booting and improve
the performance.
Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
PopMetal-RK3288 board could enable SD3.0 card but need vccio_sd
to support the voltage range from 1V8 to 3V3 and we also need to
add more UHS mode here.
Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Please don't add these for vcc_sd, and mmc-core/driver will control
it. Otherwise, it will waste energy even without sdmmc in slot.
Moreover, it will causes a bug:
If we insert/remove sd card, we could see
[9.337271] mmc0: new ultra high speed SDR25 SDHC card at address 0007
[9.345144] mmcblk0: mmc0:0007 SD32G 29.3 GiB
This is okay for normal sd insert/remove test, but when I debug some
issues for sdmmc, I did unbind/bind test. And there is a interesting
phenomenon when we bind the driver again:
[58.314069] mmc0: new high speed SDHC card at address 0007
[58.320282] mmcblk0: mmc0:0007 SD32G 29.3 GiB
So the sd card could just support high speed without power cycle
since the vcc_sd is always on, which makes the sd card fail to
reinit its internal ocr mask.
Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
PX3 EVB is designed by Rockchip for automotive field,
with integrated CVBS (TP2825) / MIPI DSI / LVDS / HDMI
video input/output interface, WIFI/BT/GPS (on a module
named S500 which based on MT6620), Gsensor BMA250E and
light&proximity sensor STK3410.
Signed-off-by: Andy Yan <andy.yan@rock-chips.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
This patch fixes the following DTC warnings:
"Node /memory has a reg or ranges property, but no unit name"
Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
This patch fixes the following DTC warnings:
"Node /memory has a reg or ranges property, but no unit name"
Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
This patch fixes the following DTC warnings:
"Node /memory has a reg or ranges property, but no unit name"
Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
This patch fixes the following DTC warnings:
"Node /memory has a reg or ranges property, but no unit name"
Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
The skeleton.dtsi file was removed in ARM64 for different reasons as
explained in commit ("3ebee5a2e1 arm64: dts: kill skeleton.dtsi").
These also applies to ARM and it will also allow to get rid of the
following DTC warnings in the future:
"Node /memory has a reg or ranges property, but no unit name"
The disassembled DTB are almost the same, besides empty chosen nodes
being removed. So the change should not have a functional impact.
Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
The skeleton.dtsi file was removed in ARM64 for different reasons as
explained in commit ("3ebee5a2e1 arm64: dts: kill skeleton.dtsi").
These also applies to ARM and it will also allow to get rid of the
following DTC warnings in the future:
"Node /memory has a reg or ranges property, but no unit name"
The disassembled DTB are almost the same, besides empty chosen nodes
being removed. So the change should not have a functional impact.
Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
The skeleton.dtsi file was removed in ARM64 for different reasons as
explained in commit ("3ebee5a2e1 arm64: dts: kill skeleton.dtsi").
These also applies to ARM and it will also allow to get rid of the
following DTC warnings in the future:
"Node /memory has a reg or ranges property, but no unit name"
The disassembled DTB are almost the same, besides empty chosen nodes
being removed. So the change should not have a functional impact.
Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
The skeleton.dtsi file was removed in ARM64 for different reasons as
explained in commit ("3ebee5a2e1 arm64: dts: kill skeleton.dtsi").
These also applies to ARM and it will also allow to get rid of the
following DTC warnings in the future:
"Node /memory has a reg or ranges property, but no unit name"
The disassembled DTB are almost the same, besides empty chosen nodes
being removed. So the change should not have a functional impact.
Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
On rk3288 it was important that powerdown and powerup counts for the
CPU/GPU in the kernel because:
* The power on default was crazy long.
* We couldn't rely on the firmware to set this up because really this
wasn't the firmware's job--the kernel was the only one that really
cared about bringing up / down CPUs and the GPU and doing suspend /
resume (which involves bringing up / down CPUs).
On newer ARM systems (like rk3399) ARM Trusted Firmware is in charge of
bringing up and down the CPUs and it really should be in charge of
setting all these counts right. After all ATF is in charge of suspend /
resume and CPU up / down. Let's get out of the way and let ATF do its
job.
A few other motivations for doing this:
* Depending on another configuration (PMU_24M_EN_CFG) these counts can
be either in 24M or 32k cycles. Thus, though ATF isn't really so
involved in bringing up the GPU, ATF should probably manage the counts
for everything so it can also manage the 24M / 32k choice.
* It turns out that (right now) 24M mode is broken on rk3399 and not
being used. That means that the count the kernel was programming
in (24) was not 1 us (which it seems was intended) but was actually
.75 ms
* On rk3399 there are actually 2 separate registers for setting CPU
up/down time plus 1 register for GPU up/down time. The curent kernel
code actually was putting the register for the "little" cores in the
"CPU" slot and the register for the "big" cores in the "GPU" slot. It
was never initting the GPU counts.
Note: this change assumes that ATF will actually set these values at
boot, as I'm proposing in <http://crosreview.com/372381>.
Signed-off-by: Douglas Anderson <dianders@chromium.org>
[ATF change has landed]
Signed-off-by: Heiko Stuebner <heiko@sntech.de>