[ Upstream commit 2937f5d2e2 ]
When the kernel is not configured CONFIG_OF, the max14577_charger_dt_init
function returns NULL. Fix the max14577_charger_probe functionby returning
-ENODATA instead of potentially passing a NULL pointer to PTR_ERR.
This fixes the below smatch warning:
max14577_charger_probe() warn: passing zero to 'PTR_ERR'
Fixes: e30110e9c9 ("charger: max14577: Configure battery-dependent settings from DTS and sysfs")
Signed-off-by: Charles Han <hanchunchao@inspur.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20250519061601.8755-1-hanchunchao@inspur.com
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d9fa3aae08 ]
In the cpcap_usb_detect() function, the power_supply_get_by_name()
function may return `NULL` instead of an error pointer.
To prevent potential null pointer dereferences, Added a null check.
Fixes: eab4e6d953 ("power: supply: cpcap-charger: get the battery inserted infomation from cpcap-battery")
Signed-off-by: Charles Han <hanchunchao@inspur.com>
Link: https://lore.kernel.org/r/20250519024741.5846-1-hanchunchao@inspur.com
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f16d9fb6cf ]
Multiple applications may access the battery gauge at the same time, so
the gauge may be busy and EBUSY will be returned. The driver will set a
flag to record the EBUSY state, and this flag will be kept until the next
periodic update. When this flag is set, bq27xxx_battery_get_property()
will just return ENODEV until the flag is updated.
Even if the gauge was busy during the last accessing attempt, returning
ENODEV is not ideal, and can cause confusion in the applications layer.
Instead, retry accessing the I2C to update the flag is as expected, for
the gauge typically recovers from busy state within a few milliseconds.
If still failed to access the gauge, the real error code would be returned
instead of ENODEV (as suggested by Pali Rohár).
Reviewed-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Jerry Lv <Jerry.Lv@axis.com>
Link: https://lore.kernel.org/r/20250415-foo-fix-v2-1-5b45a395e4cc@axis.com
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c73d19f89c ]
Device can be unbound, so driver must also release memory for the wakeup
source.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20250406202730.55096-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 62d48983f2 ]
This patch adds a small optimization to the low-level at91_reset()
function, which includes:
- Removes the extra branch, since the following store operations
already have proper condition checks.
- Removes the definition of the clobber register r4, since it is
no longer used in the code.
Fixes: fcd0532fac ("power: reset: at91-reset: make at91sam9g45_restart() generic")
Signed-off-by: Alexander Shiyan <eagle.alexander923@gmail.com>
Reviewed-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20250307053809.20245-1-eagle.alexander923@gmail.com
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit bbcfe510ec ]
Allow a boolean property of "x-powers,no-thermistor" to specify devices
where the ts pin is not connected to anything. This works around an
issue found with some devices where the efuse is not programmed
correctly from the factory or when the register gets set erroneously.
Signed-off-by: Chris Morgan <macromorgan@hotmail.com>
Tested-by: Philippe Simons <simons.philippe@gmail.com>
Link: https://lore.kernel.org/r/20250204155835.161973-4-macroalpha82@gmail.com
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 30cc7b0d0e ]
The charge input threshold voltage register on the MAX77693 PMIC accepts
four values: 0x0 for 4.3v, 0x1 for 4.7v, 0x2 for 4.8v and 0x3 for 4.9v.
Due to an oversight, the driver calculated the values for 4.7v and above
starting from 0x0, rather than from 0x1 ([(4700000 - 4700000) / 100000]
gives 0).
Add 1 to the calculation to ensure that 4.7v is converted to a register
value of 0x1 and that the other two voltages are converted correctly as
well.
Fixes: 87c2d90678 ("power: max77693: Add charger driver for Maxim 77693")
Signed-off-by: Artur Weber <aweber.kernel@gmail.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20250316-max77693-charger-input-threshold-fix-v1-1-2b037d0ac722@gmail.com
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 45291874a7 ]
Commit 243f8ffc88 ("power: supply: bq27xxx_battery: Notify also about
status changes") intended to notify userspace when the status changes,
based on the flags register. However, the cached state is updated too
early, before the flags are tested for any changes. Remove the premature
update.
Fixes: 243f8ffc88 ("power: supply: bq27xxx_battery: Notify also about status changes")
Signed-off-by: Sicelo A. Mhlongo <absicsz@gmail.com>
Link: https://lore.kernel.org/r/20241125152945.47937-1-absicsz@gmail.com
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 98380110bd ]
Correct the fault handling for the AXP717 by changing the i2c write
from regmap_update_bits() to regmap_write_bits(). The update bits
function does not work properly on a RW1C register where we must
write a 1 back to an existing register to clear it.
Additionally, as part of this testing I confirmed the behavior of
errors reappearing, so remove comment about assumptions.
Fixes: 6625767049 ("power: supply: axp20x_battery: add support for AXP717")
Signed-off-by: Chris Morgan <macromorgan@hotmail.com>
Reviewed-by: Chen-Yu Tsai <wens@csie.org>
Link: https://lore.kernel.org/r/20250131231455.153447-2-macroalpha82@gmail.com
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3fb3cb4350 ]
Size of variable sd_gain equals four bytes - DA9150_QIF_SD_GAIN_SIZE.
Size of variable shunt_val equals two bytes - DA9150_QIF_SHUNT_VAL_SIZE.
The expression sd_gain * shunt_val is currently being evaluated using
32-bit arithmetic. So during the multiplication an overflow may occur.
As the value of type 'u64' is used as storage for the eventual result, put
ULL variable at the first position of each expression in order to give the
compiler complete information about the proper arithmetic to use. According
to C99 the guaranteed width for a variable of type 'unsigned long long' >=
64 bits.
Remove the explicit cast to u64 as it is meaningless.
Just for the sake of consistency, perform the similar trick with another
expression concerning 'iavg'.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: a419b4fd91 ("power: Add support for DA9150 Fuel-Gauge")
Signed-off-by: Andrey Vatoropin <a.vatoropin@crpt.ru>
Link: https://lore.kernel.org/r/20250130090030.53422-1-a.vatoropin@crpt.ru
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit afc6e39e82 upstream.
Fix set charge current limits for devices which allow to set the lowest
charge current limit to be greater zero. If requested charge current limit
is below lowest limit, the index equals current_limit_map_size which leads
to accessing memory beyond allocated memory.
Fixes: be2919d835 ("power: supply: gpio-charger: add charge-current-limit feature")
Cc: stable@vger.kernel.org
Signed-off-by: Dimitri Fedrau <dimitri.fedrau@liebherr.com>
Link: https://lore.kernel.org/r/20241209-fix-charge-current-limit-v1-1-760d9b8f2af3@liebherr.com
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit c28dc9fc24 upstream.
ECs implementing the v2 command will not stop charging when the end
threshold is reached. Instead they will begin discharging until the
start threshold is reached, leading to permanent charge and discharge
cycles. This defeats the point of the charge control mechanism.
Avoid the issue by hiding the start threshold on v2 systems.
Instead on those systems program the EC with start == end which forces
the EC to reach and stay at that level.
v1 does not support thresholds and v3 works correctly,
at least judging from the code.
Reported-by: Thomas Koch <linrunner@gmx.net>
Fixes: c6ed48ef52 ("power: supply: add ChromeOS EC based charge control driver")
Cc: stable@vger.kernel.org
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Link: https://lore.kernel.org/r/20241208-cros_charge-control-v2-v1-3-8d168d0f08a3@weissschuh.net
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit e65a1b7fad upstream.
Allow setting the start and stop thresholds to the same value.
There is no reason to disallow it.
Suggested-by: Thomas Koch <linrunner@gmx.net>
Fixes: c6ed48ef52 ("power: supply: add ChromeOS EC based charge control driver")
Cc: stable@vger.kernel.org
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Link: https://lore.kernel.org/r/20241208-cros_charge-control-v2-v1-2-8d168d0f08a3@weissschuh.net
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit e5f84d1cf5 upstream.
Concurrent accesses through sysfs may lead to inconsistent state in the
priv data. Introduce a mutex to avoid this.
Fixes: c6ed48ef52 ("power: supply: add ChromeOS EC based charge control driver")
Cc: stable@vger.kernel.org
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Link: https://lore.kernel.org/r/20241208-cros_charge-control-v2-v1-1-8d168d0f08a3@weissschuh.net
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit b3ded6072c ]
There are 2 issues with bq24296_set_otg_vbus():
1. When writing the OTG_CONFIG bit it uses POC_CHG_CONFIG_SHIFT which
should be POC_OTG_CONFIG_SHIFT.
2. When turning the regulator off it never turns charging back on. Note
this must be done through bq24190_charger_set_charge_type(), to ensure
that the charge_type property value of none/trickle/fast is honored.
Resolve both issues to fix BQ24296 Vbus regulator support not working.
Fixes: b150a703b5 ("power: supply: bq24190_charger: Add support for BQ24296")
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20241116203648.169100-2-hdegoede@redhat.com
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b6d445f672 ]
This fails to link when compile-testing and the auxiliary bus is not built-in:
x86_64-linux-ld: drivers/power/reset/ep93xx-restart.o: in function `ep93xx_reboot_driver_init':
ep93xx-restart.c:(.init.text+0x11): undefined reference to `__auxiliary_driver_register'
x86_64-linux-ld: drivers/power/reset/ep93xx-restart.o: in function `ep93xx_reboot_driver_exit':
ep93xx-restart.c:(.exit.text+0x8): undefined reference to `auxiliary_driver_unregister'
Add the appropriate dependency.
Fixes: 9fa7cdb436 ("power: reset: Add a driver for the ep93xx reset")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20241111104418.3891756-1-arnd@kernel.org
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c46a9ee5c6 ]
Use IC status regfield to rewrite the 'get_staus' function. The original
one cannot cover some special scenario like as charger OTG or JEITA case.
Fixes: 4a1a5f6781 ("power: supply: rt9471: Add Richtek RT9471 charger driver")
Reported-by: Lucas Tsai <lucas_tsai@richtek.com>
Signed-off-by: ChiYuan Huang <cy_huang@richtek.com>
Link: https://lore.kernel.org/r/67ba92bb4a9c51d9cafadab30b788a3a2c3048e1.1727252762.git.cy_huang@richtek.com
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 34f99d3b70 ]
Correct bq27426 registers, according to technical reference manual
it does not have Design Capacity register so it is not register
compatible with bq27421.
Fixes: 5ef6a16033 ("power: supply: bq27xxx: Add support for BQ27426")
Signed-off-by: Barnabás Czémán <barnabas.czeman@mainlining.org>
Link: https://lore.kernel.org/r/20241016-fix_bq27426-v2-1-aa6c0f51a9f6@mainlining.org
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f6da4553ff ]
The put_device() call in power_supply_put() may call
power_supply_dev_release(). The latter function does not sleep so
power_supply_put() doesn't sleep either. Hence, remove the might_sleep()
call from power_supply_put(). This patch suppresses false positive
complaints about calling a sleeping function from atomic context if
power_supply_put() is called from atomic context.
Cc: Kyle Tso <kyletso@google.com>
Cc: Krzysztof Kozlowski <krzk@kernel.org>
Fixes: 1a352462b5 ("power_supply: Add power_supply_put for decrementing device reference counter")
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240917193914.47566-1-bvanassche@acm.org
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f82bf3c579 ]
This driver uses various OF-specific functions and depends on phandle
parsing. There's no reason to make it available to non-OF systems so add
a relevant dependency switch to its Kconfig entry.
Fixes: 2f1630f437 ("power: pwrseq: add a driver for the PMU module on the QCom WCN chipsets")
Link: https://lore.kernel.org/r/20241004130449.51725-1-brgl@bgdev.pl
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
asm/unaligned.h is always an include of asm-generic/unaligned.h;
might as well move that thing to linux/unaligned.h and include
that - there's nothing arch-specific in that header.
auto-generated by the following:
for i in `git grep -l -w asm/unaligned.h`; do
sed -i -e "s/asm\/unaligned.h/linux\/unaligned.h/" $i
done
for i in `git grep -l -w asm-generic/unaligned.h`; do
sed -i -e "s/asm-generic\/unaligned.h/linux\/unaligned.h/" $i
done
git mv include/asm-generic/unaligned.h include/linux/unaligned.h
git mv tools/include/asm-generic/unaligned.h tools/include/linux/unaligned.h
sed -i -e "/unaligned.h/d" include/asm-generic/Kbuild
sed -i -e "s/__ASM_GENERIC/__LINUX/" include/linux/unaligned.h tools/include/linux/unaligned.h
This concludes a long journey towards replacing the old
board files with devictree description on the Cirrus Logic
EP93xx platform.
Nikita Shubin has been working on this for a long time,
for details see the last post on
https://lore.kernel.org/lkml/20240909-ep93xx-v12-0-e86ab2423d4b@maquefel.me/
-----BEGIN PGP SIGNATURE-----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=Y3Cd
-----END PGP SIGNATURE-----
Merge tag 'soc-ep93xx-dt-6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull SoC update from Arnd Bergmann:
"Convert ep93xx to devicetree
This concludes a long journey towards replacing the old board files
with devictree description on the Cirrus Logic EP93xx platform.
Nikita Shubin has been working on this for a long time, for details
see the last post on
https://lore.kernel.org/lkml/20240909-ep93xx-v12-0-e86ab2423d4b@maquefel.me/"
* tag 'soc-ep93xx-dt-6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (47 commits)
dt-bindings: gpio: ep9301: Add missing "#interrupt-cells" to examples
MAINTAINERS: Update EP93XX ARM ARCHITECTURE maintainer
soc: ep93xx: drop reference to removed EP93XX_SOC_COMMON config
net: cirrus: use u8 for addr to calm down sparse
dmaengine: cirrus: use snprintf() to calm down gcc 13.3.0
dmaengine: ep93xx: Fix a NULL vs IS_ERR() check in probe()
pinctrl: ep93xx: Fix raster pins typo
spi: ep93xx: update kerneldoc comments for ep93xx_spi
clk: ep93xx: Fix off by one in ep93xx_div_recalc_rate()
clk: ep93xx: add module license
dmaengine: cirrus: remove platform code
ASoC: cirrus: edb93xx: Delete driver
ARM: ep93xx: soc: drop defines
ARM: ep93xx: delete all boardfiles
ata: pata_ep93xx: remove legacy pinctrl use
pwm: ep93xx: drop legacy pinctrl
ARM: ep93xx: DT for the Cirrus ep93xx SoC platforms
ARM: dts: ep93xx: Add EDB9302 DT
ARM: dts: ep93xx: add ts7250 board
ARM: dts: add Cirrus EP93XX SoC .dtsi
...
- add support for the new PMU variant inside the WCN6855 chipset
- add documentation for the subsystem
-----BEGIN PGP SIGNATURE-----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=u9Ea
-----END PGP SIGNATURE-----
Merge tag 'pwrseq-updates-for-v6.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux
Pull power sequencing updates from Bartosz Golaszewski:
"There's one change adding support for a new PMU model and another
adding documentation for the subsystem which probably should have been
part of the initial commit but better late than never:
- add support for the new PMU variant inside the WCN6855 chipset
- add documentation for the subsystem"
* tag 'pwrseq-updates-for-v6.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
Documentation: add a driver API doc for the power sequencing subsystem
power: sequencing: qcom-wcn: add support for the WCN6855 PMU
* power-supply core
- introduce power_supply_show_enum_with_available() helper
- change usb_types from an array into a bitmask
- fix early usage of power_supply_property_is_writeable() resulting
in sysfs files not being writable
- fix missing temp1_max_alarm attribute in power-supply's hwmon devices
* drivers
- max1720x: expose nvmem device
- brcmstb: cleanup driver to use latest APIs
- max77693: expose input and charging current limit
- max17042_battery: fix state of charge reading for devices without
current sensing
- axp20x_battery: add AXP717 support
- axp20x_battery: fix min/max voltage properties
- axp20x_usb_power: add AXP717 support
- axp20x_usb_power: add DT based input current limit
* Documentation updates
* misc. minor cleanups and fixes
-----BEGIN PGP SIGNATURE-----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=UKRL
-----END PGP SIGNATURE-----
Merge tag 'for-v6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply
Pull power supply and reset updates from Sebastian Reichel:
"Power-supply core:
- introduce power_supply_show_enum_with_available() helper
- change usb_types from an array into a bitmask
- fix early usage of power_supply_property_is_writeable() resulting
in sysfs files not being writable
- fix missing temp1_max_alarm attribute in power-supply's hwmon
devices
Drivers:
- max1720x: expose nvmem device
- brcmstb: cleanup driver to use latest APIs
- max77693: expose input and charging current limit
- max17042_battery: fix state of charge reading for devices without
current sensing
- axp20x_battery: add AXP717 support
- axp20x_battery: fix min/max voltage properties
- axp20x_usb_power: add AXP717 support
- axp20x_usb_power: add DT based input current limit
Documentation updates
Misc minor cleanups and fixes"
* tag 'for-v6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply: (38 commits)
power: supply: hwmon: Fix missing temp1_max_alarm attribute
power: supply: Drop use_cnt check from power_supply_property_is_writeable()
power: supply: ab8500: Constify struct kobj_type
power: supply: max1720x: fix a double free on error in probe()
power: supply: axp20x_battery: add support for AXP717
power: supply: axp20x_usb_power: Add support for AXP717
dt-bindings: power: supply: axp20x: Add AXP717 compatible
dt-bindings: power: supply: axp20x: Add AXP717 compatible
power: supply: axp20x_usb_power: Fix spelling mistake "reqested" -> "requested"
power: supply: Change usb_types from an array into a bitmask
power: supply: sysfs: Move power_supply_show_enum_with_available() up
power: supply: sysfs: Add power_supply_show_enum_with_available() helper
power: supply: rt9467-charger: Remove "usb_type" property write support
power: supply: ucs1002: Adjust ucs1002_set_usb_type() to accept string values
power: supply: "usb_type" property may be written to
power: supply: max1720x: add read support for nvmem
mfd: axp20x: Add ADC, BAT, and USB cells for AXP717
power: supply: core: constify psy_tzd_ops
power: reset: brcmstb: Do not go into infinite loop if reset fails
power: reset: brcmstb: Use devm_register_sys_off_handler()
...
Temp channel 0 aka temp1 can have a temp1_max_alarm attribute for
power_supply devices which have a POWER_SUPPLY_PROP_TEMP_ALERT_MAX
property.
HWMON_T_MAX_ALARM was missing from power_supply_hwmon_info for
temp channel 0, causing the hwmon temp1_max_alarm attribute to be
missing from such power_supply devices.
Add this to power_supply_hwmon_info to fix this.
Fixes: f1d33ae806 ("power: supply: remove duplicated argument in power_supply_hwmon_info")
Cc: stable@vger.kernel.org
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20240908185337.103696-2-hdegoede@redhat.com
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
power_supply_property_is_writeable() gets called from the is_visible()
callback for the sysfs attributes of power_supply class devices and for
the sysfs attributes of power_supply core instantiated hwmon class devices.
These sysfs attributes get registered by the device_add() respectively
power_supply_add_hwmon_sysfs() calls in power_supply_register().
use_cnt gets initialized to 0 and is incremented only after these calls.
So when power_supply_property_is_writeable() gets called it always return
-ENODEV because of use_cnt == 0.
This causes all the attributes to have permissions of 444 even those which
should be writable. This used to be a problem only for hwmon sysfs
attributes but since commit be6299c6e5 ("power: supply: sysfs: use
power_supply_property_is_writeable()") this now also impacts power_supply
class sysfs attributes.
Fixes: be6299c6e5 ("power: supply: sysfs: use power_supply_property_is_writeable()")
Fixes: e67d4dfc9f ("power: supply: Add HWMON compatibility layer")
Cc: stable@vger.kernel.org
Cc: Thomas Weißschuh <linux@weissschuh.net>
Cc: Andrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/stable/20240908185337.103696-1-hdegoede%40redhat.com
Link: https://lore.kernel.org/r/20240908185337.103696-1-hdegoede@redhat.com
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Implement the reset behaviour of the various EP93xx SoCS
in drivers/power/reset.
It used to be located in arch/arm/mach-ep93xx.
Signed-off-by: Nikita Shubin <nikita.shubin@maquefel.me>
Tested-by: Alexander Sverdlin <alexander.sverdlin@gmail.com>
Acked-by: Sebastian Reichel <sre@kernel.org>
Acked-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This 'struct kobj_type' is not modified. It is only used in
kobject_init_and_add() which takes a 'const struct kobj_type *ktype'
parameter.
Constifying this structure and moving it to a read-only section,
and can increase over all security.
Signed-off-by: Hongbo Li <lihongbo22@huawei.com>
Link: https://lore.kernel.org/r/20240904011434.2010118-1-lihongbo22@huawei.com
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
In this code, if devm_add_action_or_reset() fails, it will call
max1720x_unregister_ancillary() which in turn calls
i2c_unregister_device(). Thus the call to i2c_unregister_device() on the
following line is not required and is a double unregister. Delete it.
Fixes: 47271a9356 ("power: supply: max1720x: add read support for nvmem")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Link: https://lore.kernel.org/r/9c2f76e7-5679-473b-9b9c-e11b492b96ac@stanley.mountain
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Add support for the AXP717 PMIC battery charger. The AXP717 differs
greatly from existing AXP battery chargers in that it cannot measure
the discharge current. The datasheet does not document the current
value's offset or scale, so the POWER_SUPPLY_PROP_CURRENT_NOW is left
unscaled.
Tested-by: Philippe Simons <simons.philippe@gmail.com>
Signed-off-by: Chris Morgan <macromorgan@hotmail.com>
Link: https://lore.kernel.org/r/20240821215456.962564-15-macroalpha82@gmail.com
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Add support for the AXP717 PMIC. The AXP717 PMIC allows for detection
of USB type like the AXP813, but has little in common otherwise with
the other AXP PMICs. The USB charger is able to provide between
100000uA and 3250000uA of power, and can measure the VBUS input in mV
with up to 14 bits of precision.
Tested-by: Philippe Simons <simons.philippe@gmail.com>
Signed-off-by: Chris Morgan <macromorgan@hotmail.com>
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240821215456.962564-14-macroalpha82@gmail.com
[fix axp717_usb_power_desc.usb_types]
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
There is a spelling mistake in a dev_warn message. Fix it.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Acked-by: Chen-Yu Tsai <wens@csie.org>
Link: https://lore.kernel.org/r/20240828093447.271503-1-colin.i.king@gmail.com
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Changing usb_types type from array to bitmap in the power_supply_desc
struct requires updating power-supply drivers living in different
subsystem, so it is handled via an immutable branch.
-----BEGIN PGP SIGNATURE-----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=hDPb
-----END PGP SIGNATURE-----
Merge tag 'ib-psy-usb-types-signed' into psy-next
Changing usb_types type from array to bitmap in the power_supply_desc
struct requires updating power-supply drivers living in different
subsystem, so it is handled via an immutable branch.
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
The bit_types array just hold a list of valid enum power_supply_usb_type
values which map to 0 - 9. This can easily be represented as a bitmap.
This reduces the size of struct power_supply_desc and further reduces
the data section size by drivers no longer needing to store the array.
This also unifies how usb_types are handled with charge_behaviours,
which allows power_supply_show_usb_type() to be removed.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/20240831142039.28830-7-hdegoede@redhat.com
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Move power_supply_show_enum_with_available() higher up in
the power_supply_sysfs.c file.
This is a preparation patch to avoid needing a forward declaration
when replacing power_supply_show_usb_type() with it later on.
This commit only moves the function, there are no changes to it.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20240831142039.28830-6-hdegoede@redhat.com
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Turn power_supply_charge_behaviour_show() into a generic function for
showing enum values with their available (for writing) values shown
and the current value shown surrounded by sqaure-brackets like
the show() output for "usb_type" and "charge_behaviour".
This is a preparation patch for refactoring the "usb_type" property
handling to use a bitmask indicating available usb-types + this new
generic function.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20240831142039.28830-5-hdegoede@redhat.com
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
The "usb_type" property must be read-only for charger power-supply devices,
see: Documentation/ABI/testing/sysfs-class-power.
But the rt9467 driver allows writing 0/1 to it to disable/enable charging.
Other charger drivers use the "status" property for this and the rt9467
code also allows writing 0/1 to its "status" property and this does
the exact same thing as writing 0/1 to its "usb_type" property.
Drop write support for the "usb_type" property making it readonly to match
the ABI documentation. If userspace wants to disable/enable charging it
can use the "status" property for this.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20240831142039.28830-4-hdegoede@redhat.com
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
power_supply_sysfs.c accept wrrites of strings to "usb_type" for strings
values matching an entry in POWER_SUPPLY_USB_TYPE_TEXT[]. If such a
string value is written then the int value passed to ucs1002_set_property()
will be an enum power_supply_usb_type value.
Before this change ucs1002_set_usb_type() expected the value to be an index
into ucs1002_usb_types[]. Adjust ucs1002_set_usb_type() to use the enum
value directly so that writing string values works.
The list of supported types in ucs1002_usb_types[] is: PD, SDP, DCP, CDP.
The [POWER_SUPPLY_USB_TYPE_]SDP, DCP and CDP enum labels have a value of
1, 2 and 3. So userspace selecting SDP, DCP or CDP by writing 1, 2 or 3
will keep working. POWER_SUPPLY_USB_TYPE_PD which is mapped to the ucs1002
dedicated mode however has a value of 6. Before this change writing 0 would
select the dedicated mode. To preserve userspace API compatibility also map
POWER_SUPPLY_USB_TYPE_UNKNOWN (which is 0) to the dedicated mode.
Cc: Enric Balletbo Serra <enric.balletbo@collabora.com>
Cc: Andrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20240831142039.28830-3-hdegoede@redhat.com
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
According to Documentation/ABI/testing/sysfs-class-power the "usb_type"
property is Read-Only.
For power-supplies which consume USB power such as battery charger chips,
this is correct.
But the UCS1002 USB Port Power Controller driver which is a driver
for a chip which is a power-source for USB-A charging ports "usb_type"
is actually writable to configure the type of USB charger emulated
by the USB-A port.
Adjust the docs and the power_supply_sysfs.c code to adjust for this
new writeable use of "usb_type":
1. Update Documentation/ABI/testing/sysfs-class-power to document that
"usb_type" may be writable
2. Change the power_supply_attr type in power_supply_sysfs.c from
POWER_SUPPLY_ATTR() into POWER_SUPPLY_ENUM_ATTR() so that the various
usb_type string values from POWER_SUPPLY_TYPE_TEXT[] such as e.g.
"SDP" and "USB_PD" can be written to the "usb_type" attribute instead
of only accepting integer values.
Cc: Enric Balletbo Serra <enric.balletbo@collabora.com>
Cc: Andrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/20240831142039.28830-2-hdegoede@redhat.com
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
ModelGauge m5 and device configuration values are stored in nonvolatile
memory to prevent data loss if the IC loses power. Add read support for
the nonvolatile memory on MAX1720X devices.
Signed-off-by: Dimitri Fedrau <dima.fedrau@gmail.com>
Link: https://lore.kernel.org/r/20240903063526.222890-1-dima.fedrau@gmail.com
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
- set the direction of the wlan-enable GPIO to output after requesting
it as-is
-----BEGIN PGP SIGNATURE-----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=VM4v
-----END PGP SIGNATURE-----
Merge tag 'pwrseq-fixes-for-v6.11-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux
Pull power sequencing fix from Bartosz Golaszewski:
"A follow-up fix for the power sequencing subsystem. It turned out the
previous fix for this driver was incomplete and broke the WLAN support
on some platforms. This addresses the issue.
- set the direction of the wlan-enable GPIO to output after
requesting it as-is"
* tag 'pwrseq-fixes-for-v6.11-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
power: sequencing: qcom-wcn: set the wlan-enable GPIO to output
Commit a9aaf1ff88 ("power: sequencing: request the WLAN enable GPIO
as-is") broke WLAN on boards on which the wlan-enable GPIO enabling the
wifi module isn't in output mode by default. We need to set direction to
output while retaining the value that was already set to keep the ath
module on if it's already started.
Fixes: a9aaf1ff88 ("power: sequencing: request the WLAN enable GPIO as-is")
Link: https://lore.kernel.org/r/20240823115500.37280-1-brgl@bgdev.pl
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
There is a fairly large number of bug fixes for Qualcomm platforms,
most of them addressing issues with the devicetree files for the
newly added Snapdragon X1 based laptops to make them more reliable.
The Qualcomm driver changes address a few build-time issues as well
as runtime problems in the tzmem and scm firmware, the USB Type-C
driver, and the cmd-db and pmic_glink soc drivers.
The NXP i.MX usually gets a bunch of devicetree fixes that is proportional
to the number of supported machines. This includes both warning fixes
and correctness for the 64-bit i.MX9, i.MX8 and layerscape platforms,
as well as a single fix for a 32-bit i.MX6 based board.
The other changes are the usual minor changes, including an update to the
MAINTAINERS file, an omap3 dts file and a SoC driver for mpfs (risc-v).
-----BEGIN PGP SIGNATURE-----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=tK5m
-----END PGP SIGNATURE-----
Merge tag 'arm-fixes-6.11-2' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC fixes from Arnd Bergmann:
"There is a fairly large number of bug fixes for Qualcomm platforms,
most of them addressing issues with the devicetree files for the newly
added Snapdragon X1 based laptops to make them more reliable.
The Qualcomm driver changes address a few build-time issues as well as
runtime problems in the tzmem and scm firmware, the USB Type-C driver,
and the cmd-db and pmic_glink soc drivers.
The NXP i.MX usually gets a bunch of devicetree fixes that is
proportional to the number of supported machines. This includes both
warning fixes and correctness for the 64-bit i.MX9, i.MX8 and
layerscape platforms, as well as a single fix for a 32-bit i.MX6 based
board.
The other changes are the usual minor changes, including an update to
the MAINTAINERS file, an omap3 dts file and a SoC driver for mpfs
(risc-v)"
* tag 'arm-fixes-6.11-2' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (50 commits)
firmware: microchip: fix incorrect error report of programming:timeout on success
soc: qcom: pd-mapper: Fix singleton refcount
firmware: qcom: tzmem: disable sdm670 platform
soc: qcom: pmic_glink: Actually communicate when remote goes down
usb: typec: ucsi: Move unregister out of atomic section
soc: qcom: pmic_glink: Fix race during initialization
firmware: qcom: qseecom: remove unused functions
firmware: qcom: tzmem: fix virtual-to-physical address conversion
firmware: qcom: scm: Mark get_wq_ctx() as atomic call
arm64: dts: qcom: x1e80100: Fix Adreno SMMU global interrupt
arm64: dts: qcom: disable GPU on x1e80100 by default
arm64: dts: imx8mm-phygate: fix typo pinctrcl-0
arm64: dts: imx95: correct L3Cache cache-sets
arm64: dts: imx95: correct a55 power-domains
arm64: dts: freescale: imx93-tqma9352-mba93xxla: fix typo
arm64: dts: freescale: imx93-tqma9352: fix CMA alloc-ranges
ARM: dts: imx6dl-yapp43: Increase LED current to match the yapp4 HW design
arm64: dts: imx93: update default value for snps,clk-csr
arm64: dts: freescale: tqma9352: Fix watchdog reset
arm64: dts: imx8mp-beacon-kit: Fix Stereo Audio on WM8962
...
This corrects the tzmem virt-to-phys conversion, which caused issues for
the uefisecapp implementation of EFI variable access. SDM670 is excluded
from tzmem usage due to reported issues.
The SCM get wait queue context call is corrected to be marked ATOMIC and
some dead code in qseecom, following the tzmem conversion, is removed.
The memory backing command DB is remapped writecombined, to avoid XPU
violations when Linux runs without the Qualcomm hypervisor.
Two compile fixes are added for pd-mapper, and the broken reference
count is corrected, to make pd-mapper deal with remoteprocs going away.
In pmic_glink a race condition where the client callbacks might be
called before we returned the client handle is corrected. The broken conditions
for when to signal that the firmware is going down is also corrected.
In the pmic_glink UCSI driver, the ucsi_unregister() is moved out of the
pdr callback, as this is being invoked in atomic context.
Konrad's email address is updated in MAINTAINERS, and related mailmap
entries are added.
-----BEGIN PGP SIGNATURE-----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=Zo90
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=pkFq
-----END PGP SIGNATURE-----
Merge tag 'qcom-drivers-fixes-for-6.11' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/fixes
Qualcomm driver fixes for v6.11
This corrects the tzmem virt-to-phys conversion, which caused issues for
the uefisecapp implementation of EFI variable access. SDM670 is excluded
from tzmem usage due to reported issues.
The SCM get wait queue context call is corrected to be marked ATOMIC and
some dead code in qseecom, following the tzmem conversion, is removed.
The memory backing command DB is remapped writecombined, to avoid XPU
violations when Linux runs without the Qualcomm hypervisor.
Two compile fixes are added for pd-mapper, and the broken reference
count is corrected, to make pd-mapper deal with remoteprocs going away.
In pmic_glink a race condition where the client callbacks might be
called before we returned the client handle is corrected. The broken conditions
for when to signal that the firmware is going down is also corrected.
In the pmic_glink UCSI driver, the ucsi_unregister() is moved out of the
pdr callback, as this is being invoked in atomic context.
Konrad's email address is updated in MAINTAINERS, and related mailmap
entries are added.
* tag 'qcom-drivers-fixes-for-6.11' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux:
soc: qcom: pd-mapper: Fix singleton refcount
firmware: qcom: tzmem: disable sdm670 platform
soc: qcom: pmic_glink: Actually communicate when remote goes down
usb: typec: ucsi: Move unregister out of atomic section
soc: qcom: pmic_glink: Fix race during initialization
firmware: qcom: qseecom: remove unused functions
firmware: qcom: tzmem: fix virtual-to-physical address conversion
firmware: qcom: scm: Mark get_wq_ctx() as atomic call
MAINTAINERS: Update Konrad Dybcio's email address
mailmap: Add an entry for Konrad Dybcio
soc: qcom: pd-mapper: mark qcom_pdm_domains as __maybe_unused
soc: qcom: cmd-db: Map shared memory as WC, not WB
soc: qcom: pd-mapper: Depend on ARCH_QCOM || COMPILE_TEST
Link: https://lore.kernel.org/r/20240826145209.1646159-1-andersson@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
There may be other backup reset methods available, do not halt
here so that other reset methods can be tried.
Signed-off-by: Andrew Davis <afd@ti.com>
Reviewed-by: Dhruva Gole <d-gole@ti.com>
Acked-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://lore.kernel.org/r/20240610142836.168603-5-afd@ti.com
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Function register_restart_handler() is deprecated. Using this new API
removes our need to keep and manage a struct notifier_block.
Signed-off-by: Andrew Davis <afd@ti.com>
Reviewed-by: Dhruva Gole <d-gole@ti.com>
Acked-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://lore.kernel.org/r/20240610142836.168603-4-afd@ti.com
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Simplify probe by fetching the regmap and its arguments in one call.
Signed-off-by: Andrew Davis <afd@ti.com>
Reviewed-by: Dhruva Gole <d-gole@ti.com>
Acked-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://lore.kernel.org/r/20240610142836.168603-3-afd@ti.com
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
