[ Upstream commit b4d52c6982 ]
The require_cmd() method was checking for command availability locally
even when remote=True was specified, due to a missing host parameter.
Fix by passing host=self.remote when checking remote command
availability, ensuring commands are verified on the correct host.
Fixes: f1e68a1a4a ("selftests: drv-net: add require_XYZ() helpers for validating env")
Reviewed-by: Nimrod Oren <noren@nvidia.com>
Signed-off-by: Gal Pressman <gal@nvidia.com>
Link: https://patch.msgid.link/20250723135454.649342-2-gal@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f60227f344 ]
Currently, the userspace RV tool skips trace events triggered by the RV
tool itself, this can be changed by passing the parameter -s, which sets
the variable config_my_pid to 0 (instead of the tool's PID).
This has the side effect of skipping events generated by idle (PID 0).
Set config_my_pid to -1 (an invalid pid) to avoid skipping idle.
Cc: Nam Cao <namcao@linutronix.de>
Cc: Tomas Glozar <tglozar@redhat.com>
Cc: Juri Lelli <jlelli@redhat.com>
Cc: Clark Williams <williams@redhat.com>
Cc: John Kacur <jkacur@redhat.com>
Link: https://lore.kernel.org/20250723161240.194860-2-gmonaco@redhat.com
Fixes: 6d60f89691 ("tools/rv: Add in-kernel monitor interface")
Signed-off-by: Gabriele Monaco <gmonaco@redhat.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 867446f090 ]
The check that the new vector length we set was the expected one was typoed
to an assignment statement which for some reason the compilers didn't spot,
most likely due to the macros involved.
Fixes: a1d7111257 ("selftests: arm64: More comprehensively test the SVE ptrace interface")
Acked-by: Mark Rutland <mark.rutland@arm.com>
Acked-by: Dev Jain <dev.jain@arm.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20250609-kselftest-arm64-ssve-fixups-v2-1-998fcfa6f240@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 99fe8af069 ]
In function dump_xx_nlmsg(), when realloc() fails to allocate memory,
the original pointer to the buffer is overwritten with NULL. This causes
a memory leak because the previously allocated buffer becomes unreachable
without being freed.
Fixes: 7900efc192 ("tools/bpf: bpftool: improve output format for bpftool net")
Signed-off-by: Yuan Chen <chenyuan@kylinos.cn>
Reviewed-by: Quentin Monnet <qmo@kernel.org>
Link: https://lore.kernel.org/r/20250620012133.14819-1-chenyuan_fl@163.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 66ab68c9de ]
Break from switch expression after parsing -n CLI argument in veristat,
instead of falling through and enabling comparison mode.
Fixes: a5c57f81eb ("veristat: add ability to set BPF_F_TEST_SANITY_STRICT flag with -r flag")
Signed-off-by: Mykyta Yatsenko <yatsenko@meta.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/bpf/20250617121536.1320074-1-mykyta.yatsenko5@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6a4bd31f68 ]
When xsend() returns -1 (error), the check 'n < sizeof(buf)' incorrectly
treats it as success due to unsigned promotion. Explicitly check for -1
first.
Fixes: a4b7193d8e ("selftests/bpf: Add sockmap test for redirecting partial skb data")
Signed-off-by: Fushuai Wang <wangfushuai@baidu.com>
Link: https://lore.kernel.org/r/20250612084208.27722-1-wangfushuai@baidu.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 213879061a ]
The subsystem event test enables all "sched" events and makes sure there's
at least 3 different events in the output. It used to cat the entire trace
file to | wc -l, but on slow machines, that could last a very long time.
To solve that, it was changed to just read the first 100 lines of the
trace file. This can cause false failures as some events repeat so often,
that the 100 lines that are examined could possibly be of only one event.
Instead, create an awk script that looks for 3 different events and will
exit out after it finds them. This will find the 3 events the test looks
for (eventually if it works), and still exit out after the test is
satisfied and not cause slower machines to run forever.
Link: https://lore.kernel.org/r/20250721134212.53c3e140@batman.local.home
Reported-by: Tengda Wu <wutengda@huaweicloud.com>
Closes: https://lore.kernel.org/all/20250710130134.591066-1-wutengda@huaweicloud.com/
Fixes: 1a4ea83a6e ("selftests/ftrace: Limit length in subsystem-enable tests")
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 07b7c2b4ec ]
The step_after_suspend_test verifies that the system successfully
suspended and resumed by setting a timerfd and checking whether the
timer fully expired. However, this method is unreliable due to timing
races.
In practice, the system may take time to enter suspend, during which the
timer may expire just before or during the transition. As a result,
the remaining time after resume may show non-zero nanoseconds, even if
suspend/resume completed successfully. This leads to false test failures.
Replace the timer-based check with a read from
/sys/power/suspend_stats/success. This counter is incremented only
after a full suspend/resume cycle, providing a reliable and race-free
indicator.
Also remove the unused file descriptor for /sys/power/state, which
remained after switching to a system() call to trigger suspend [1].
[1] https://lore.kernel.org/all/20240930224025.2858767-1-yifei.l.liu@oracle.com/
Link: https://lore.kernel.org/r/20250626191626.36794-1-moonhee.lee.ca@gmail.com
Fixes: c66be905cd ("selftests: breakpoints: use remaining time to check if suspend succeed")
Signed-off-by: Moon Hee Lee <moonhee.lee.ca@gmail.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2c0a4428f5 ]
According to kselftest.h ksft_exit_skip() is not meant to be called when
a plan has already been printed.
Use the recommended function ksft_test_result_skip().
This fixes a bug, where the TAP output would be invalid when skipping:
TAP version 13
1..1
ok 2 # SKIP Not implemented on architecture
The SKIP line should start with "ok 1" as the plan only contains one test.
Fixes: 3b5992eaf7 ("selftests: vDSO: unconditionally build chacha test")
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Link: https://lore.kernel.org/all/20250611-selftests-vdso-fixes-v3-1-e62e37a6bcf5@linutronix.de
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b89732c8c8 ]
Successful syscalls don't change errno, so checking errno is wrong
to ensure that a syscall has failed. For example for the following
sequence:
prctl(PR_SET_SYSCALL_USER_DISPATCH, op, 0x0, 0xff, 0);
EXPECT_EQ(EINVAL, errno);
prctl(PR_SET_SYSCALL_USER_DISPATCH, op, 0x0, 0x0, &sel);
EXPECT_EQ(EINVAL, errno);
only the first syscall may fail and set errno, but the second may succeed
and keep errno intact, and the check will falsely pass.
Or if errno happened to be EINVAL before, even the first check may falsely
pass.
Also use EXPECT/ASSERT consistently. Currently there is an inconsistent mix
without obvious reasons for usage of one or another.
Fixes: 179ef03599 ("selftests: Add kselftest for syscall user dispatch")
Signed-off-by: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/af6a04dbfef9af8570f5bab43e3ef1416b62699a.1747839857.git.dvyukov@google.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 5ffb537e41 upstream.
Add two tests:
- one test has 'rX <op> r10' where rX is not r10, and
- another test has 'rX <op> rY' where rX and rY are not r10
but there is an early insn 'rX = r10'.
Without previous verifier change, both tests will fail.
Signed-off-by: Yonghong Song <yonghong.song@linux.dev>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20250524041340.4046304-1-yonghong.song@linux.dev
[ shung-hsi.yu: contains additional hunks for kernel/bpf/verifier.c that
should be part of the previous patch in the series, commit
e2d2115e56 "bpf: Do not include stack ptr register in precision
backtracking bookkeeping", which already incorporated. ]
Link: https://lore.kernel.org/all/9b41f9f5-396f-47e0-9a12-46c52087df6c@linux.dev/
Signed-off-by: Shung-Hsi Yu <shung-hsi.yu@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit fdf0f60a2b upstream.
The checksum mode has been added a while ago, but it is only validated
when manually launching mptcp_connect.sh with "-C".
The different CIs were then not validating these MPTCP Connect tests
with checksum enabled. To make sure they do, add a new test program
executing mptcp_connect.sh with the checksum mode.
Fixes: 94d66ba1d8 ("selftests: mptcp: enable checksum in mptcp_connect.sh")
Cc: stable@vger.kernel.org
Reviewed-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20250715-net-mptcp-sft-connect-alt-v2-2-8230ddd82454@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 37848a456f upstream.
The "mmap" and "sendfile" alternate modes for mptcp_connect.sh/.c are
available from the beginning, but only tested when mptcp_connect.sh is
manually launched with "-m mmap" or "-m sendfile", not via the
kselftests helpers.
The MPTCP CI was manually running "mptcp_connect.sh -m mmap", but not
"-m sendfile". Plus other CIs, especially the ones validating the stable
releases, were not validating these alternate modes.
To make sure these modes are validated by these CIs, add two new test
programs executing mptcp_connect.sh with the alternate modes.
Fixes: 048d19d444 ("mptcp: add basic kselftest for mptcp")
Cc: stable@vger.kernel.org
Reviewed-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20250715-net-mptcp-sft-connect-alt-v2-1-8230ddd82454@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 8694138250 ]
A few packets may still be sent out during the termination of iperf
processes. These late packets cause failures in rss_ctx.py when they
arrive on queues expected to be empty.
Example failure observed:
Check failed 2 != 0 traffic on inactive queues (context 1):
[0, 0, 1, 1, 386385, 397196, 0, 0, 0, 0, ...]
Check failed 4 != 0 traffic on inactive queues (context 2):
[0, 0, 0, 0, 2, 2, 247152, 253013, 0, 0, ...]
Check failed 2 != 0 traffic on inactive queues (context 3):
[0, 0, 0, 0, 0, 0, 1, 1, 282434, 283070, ...]
To avoid such failures, wait until all client sockets for the requested
port are either closed or in the TIME_WAIT state.
Fixes: 847aa551fa ("selftests: drv-net: rss_ctx: factor out send traffic and check")
Signed-off-by: Nimrod Oren <noren@nvidia.com>
Reviewed-by: Gal Pressman <gal@nvidia.com>
Reviewed-by: Carolina Jubran <cjubran@nvidia.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250722122655.3194442-1-noren@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0d86a8d65c ]
The hv_fcopy_uio_daemon fails to correctly handle file copy requests
from Windows hosts (e.g. via Copy-VMFile) due to wchar_t size
differences between Windows and Linux. On Linux, wchar_t is 32 bit,
whereas Windows uses 16 bit wide characters.
Fix this by ensuring that file transfers from host to Linux guest
succeed with correctly decoded file names and paths.
- Treats file name and path as __u16 arrays, not wchar_t*.
- Allocates fixed-size buffers (W_MAX_PATH) for converted strings
instead of using malloc.
- Adds a check for target path length to prevent snprintf() buffer
overflow.
Fixes: 82b0945ce2 ("tools: hv: Add new fcopy application based on uio driver")
Signed-off-by: Yasumasa Suenaga <yasuenag@gmail.com>
Reviewed-by: Naman Jain <namjain@linux.microsoft.com>
Link: https://lore.kernel.org/r/20250628022217.1514-2-yasuenag@gmail.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Message-ID: <20250628022217.1514-2-yasuenag@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit f01750aecd upstream.
token/obj_priv_implicit_token_envvar test may fail in an environment
where the process executing tests can not write to the root path.
Example:
https://github.com/libbpf/libbpf/actions/runs/11844507007/job/33007897936
Change default path used by the test to /tmp/bpf-token-fs, and make it
runtime configurable via an environment variable.
Signed-off-by: Ihor Solodrai <ihor.solodrai@pm.me>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20241115003853.864397-1-ihor.solodrai@pm.me
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Shung-Hsi Yu <shung-hsi.yu@suse.com>
[ Upstream commit 0238c45fbb ]
Initial __arena global variable support implementation in libbpf
contains a bug: it remembers struct bpf_map pointer for arena, which is
used later on to process relocations. Recording this pointer is
problematic because map pointers are not stable during ELF relocation
collection phase, as an array of struct bpf_map's can be reallocated,
invalidating all the pointers. Libbpf is dealing with similar issues by
using a stable internal map index, though for BPF arena map specifically
this approach wasn't used due to an oversight.
The resulting behavior is non-deterministic issue which depends on exact
layout of ELF object file, number of actual maps, etc. We didn't hit
this until very recently, when this bug started triggering crash in BPF
CI when validating one of sched-ext BPF programs.
The fix is rather straightforward: we just follow an established pattern
of remembering map index (just like obj->kconfig_map_idx, for example)
instead of `struct bpf_map *`, and resolving index to a pointer at the
point where map information is necessary.
While at it also add debug-level message for arena-related relocation
resolution information, which we already have for all other kinds of
maps.
Fixes: 2e7ba4f8fd ("libbpf: Recognize __arena global variables.")
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Tested-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20250718001009.610955-1-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0e9418961f ]
The mentioned test is not very stable when running on top of
debug kernel build. Increase the inter-packet timeout to allow
more slack in such environments.
Fixes: 3327a9c463 ("selftests: add functionals test for UDP GRO")
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/b0370c06ddb3235debf642c17de0284b2cd3c652.1752163107.git.pabeni@redhat.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7980ad7e4c ]
On single-CPU systems, ops.select_cpu() is never called, causing the
EXIT_SELECT_CPU test case to wait indefinitely.
Avoid the stall by skipping this specific sub-test when only one CPU is
available.
Reported-by: Phil Auld <pauld@redhat.com>
Fixes: a5db7817af ("sched_ext: Add selftests")
Signed-off-by: Andrea Righi <arighi@nvidia.com>
Reviewed-by: Phil Auld <pauld@redhat.com>
Tested-by: Phil Auld <pauld@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit aa7b65c2a2 upstream.
Starting with Rust 1.89.0 (expected 2025-08-07), under
`CONFIG_RUST_DEBUG_ASSERTIONS=y`, `objtool` may report:
rust/kernel.o: warning: objtool: _R..._6kernel4pageNtB5_4Page8read_raw()
falls through to next function _R..._6kernel4pageNtB5_4Page9write_raw()
(and many others) due to calls to the `noreturn` symbol:
core::panicking::panic_nounwind_fmt
Thus add the mangled one to the list so that `objtool` knows it is
actually `noreturn`.
See commit 56d680dd23 ("objtool/rust: list `noreturn` Rust functions")
for more details.
Cc: stable@vger.kernel.org # Needed in 6.12.y and later (Rust is pinned in older LTSs).
Cc: Josh Poimboeuf <jpoimboe@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20250712160103.1244945-2-ojeda@kernel.org
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 5e9388f798 upstream.
The below commit that updated BPF_MAP_TYPE_LRU_HASH free target,
also updated tools/testing/selftests/bpf/test_lru_map to match.
But that missed one case that passes with 4 cores, but fails at
higher cpu counts.
Update test_lru_sanity3 to also adjust its expectation of target_free.
This time tested with 1, 4, 16, 64 and 384 cpu count.
Fixes: d4adf1c9ee ("bpf: Adjust free target to avoid global starvation of LRU map")
Signed-off-by: Willem de Bruijn <willemb@google.com>
Link: https://lore.kernel.org/r/20250625210412.2732970-1-willemdebruijn.kernel@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit d4adf1c9ee ]
BPF_MAP_TYPE_LRU_HASH can recycle most recent elements well before the
map is full, due to percpu reservations and force shrink before
neighbor stealing. Once a CPU is unable to borrow from the global map,
it will once steal one elem from a neighbor and after that each time
flush this one element to the global list and immediately recycle it.
Batch value LOCAL_FREE_TARGET (128) will exhaust a 10K element map
with 79 CPUs. CPU 79 will observe this behavior even while its
neighbors hold 78 * 127 + 1 * 15 == 9921 free elements (99%).
CPUs need not be active concurrently. The issue can appear with
affinity migration, e.g., irqbalance. Each CPU can reserve and then
hold onto its 128 elements indefinitely.
Avoid global list exhaustion by limiting aggregate percpu caches to
half of map size, by adjusting LOCAL_FREE_TARGET based on cpu count.
This change has no effect on sufficiently large tables.
Similar to LOCAL_NR_SCANS and lru->nr_scans, introduce a map variable
lru->free_target. The extra field fits in a hole in struct bpf_lru.
The cacheline is already warm where read in the hot path. The field is
only accessed with the lru lock held.
Tested-by: Anton Protopopov <a.s.protopopov@gmail.com>
Signed-off-by: Willem de Bruijn <willemb@google.com>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://lore.kernel.org/r/20250618215803.3587312-1-willemdebruijn.kernel@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 47c84997c6 ]
I got the following warning when writing other tests:
+ handle_test_result_pass 'bond 802.3ad' '(lacp_active off)'
+ local 'test_name=bond 802.3ad'
+ shift
+ local 'opt_str=(lacp_active off)'
+ shift
+ log_test_result 'bond 802.3ad' '(lacp_active off)' ' OK '
+ local 'test_name=bond 802.3ad'
+ shift
+ local 'opt_str=(lacp_active off)'
+ shift
+ local 'result= OK '
+ shift
+ local retmsg=
+ shift
/net/tools/testing/selftests/net/forwarding/../lib.sh: line 315: shift: shift count out of range
This happens because an extra shift is executed even after all arguments
have been consumed. Remove the last shift in log_test_result() to avoid
this warning.
Fixes: a923af1cee ("selftests: forwarding: Convert log_test() to recognize RET values")
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Link: https://patch.msgid.link/20250709091244.88395-1-liuhangbin@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b219bcfcc9 ]
Many net selftests invent their own logging helpers. These really should be
in a library sourced by these tests. Currently forwarding/lib.sh has a
suite of perfectly fine logging helpers, but sourcing a forwarding/ library
from a higher-level directory smells of layering violation. In this patch,
move the logging helpers to net/lib.sh so that every net test can use them.
Together with the logging helpers, it's also necessary to move
pause_on_fail(), and EXIT_STATUS and RET.
Existing lib.sh users might be using these same names for their functions
or variables. However lib.sh is always sourced near the top of the
file (checked), and whatever new definitions will simply override the ones
provided by lib.sh.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Amit Cohen <amcohen@nvidia.com>
Acked-by: Shuah Khan <skhan@linuxfoundation.org>
Link: https://patch.msgid.link/edd3785a3bd72ffbe1409300989e993ee50ae98b.1731589511.git.petrm@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Stable-dep-of: 47c84997c6 ("selftests: net: lib: fix shift count out of range")
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 5b937a1ed6 upstream.
AMD Cyan Skillfish (Family 17h, Model 47h, Stepping 0h) has an error that
causes RDSEED to always return 0xffffffff, while RDRAND works correctly.
Mask the RDSEED cap for this CPU so that both /proc/cpuinfo and direct CPUID
read report RDSEED as unavailable.
[ bp: Move to amd.c, massage. ]
Signed-off-by: Mikhail Paulyshka <me@mixaill.net>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Cc: <stable@kernel.org>
Link: https://lore.kernel.org/20250524145319.209075-1-me@mixaill.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit a95743b530 upstream.
Some libc's like musl libc don't provide execinfo.h since it's not part of
POSIX. In order to fix compilation on musl, only include execinfo.h if
available (HAVE_BACKTRACE_SUPPORT)
This was discovered with c104c16073 ("Kunit to check the longest symbol
length") which starts to include linux/kallsyms.h with Alpine Linux'
configs.
Link: https://lkml.kernel.org/r/20250622014608.448718-1-fossdd@pwned.life
Fixes: c104c16073 ("Kunit to check the longest symbol length")
Signed-off-by: Achill Gilgenast <fossdd@pwned.life>
Cc: Luis Henriques <luis@igalia.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 1d31d53687 ]
The 32-bit sparc configuration (--arch sparc) crashes on
the kunit_fault_test. It's known that some architectures don't handle
deliberate segfaults in kernel mode well, so there's a config switch to
disable tests which rely upon it by default.
Use this for the sparc config, making sure the default config for it
passes.
Link: https://lore.kernel.org/r/20250416093826.1550040-1-davidgow@google.com
Fixes: 87c9c16317 ("kunit: tool: add support for QEMU")
Signed-off-by: David Gow <davidgow@google.com>
Reviewed-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Tested-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d16b3d0fb4 ]
The configuration generated by kunit ends up with a 32bit configuration.
A new kunit configuration for 64bit is to be added.
To make the difference clearer spell out the variant in the kunit
reference config.
Link: https://lore.kernel.org/r/20250415-kunit-qemu-sparc64-v1-1-253906f61102@linutronix.de
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Reviewed-by: David Gow <davidgow@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Stable-dep-of: 1d31d53687 ("kunit: qemu_configs: Disable faulting tests on 32-bit SPARC")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e275f44e0a ]
The driver for the 8250 console is not used, as no port is found.
Instead the prom0 bootconsole is used the whole time.
The prom driver translates '\n' to '\r\n' before handing of the message
off to the firmware. The firmware performs the same translation again.
In the final output produced by QEMU each line ends with '\r\r\n'.
This breaks the kunit parser, which can only handle '\r\n' and '\n'.
Use the Zilog console instead. It works correctly, is the one documented
by the QEMU manual and also saves a bit of codesize:
Before=4051011, After=4023326, chg -0.68%
Observed on QEMU 9.2.0.
Link: https://lore.kernel.org/r/20250214-kunit-qemu-sparc-console-v1-1-ba1dfdf8f0b1@linutronix.de
Fixes: 87c9c16317 ("kunit: tool: add support for QEMU")
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Reviewed-by: David Gow <davidgow@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Stable-dep-of: 1d31d53687 ("kunit: qemu_configs: Disable faulting tests on 32-bit SPARC")
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 8186255705 upstream.
The hugepage test cases of iommufd_dirty_tracking have the 64MB and 128MB
coverages. Both of them are smaller than the default hugepage size 512MB,
when CONFIG_PAGE_SIZE_64KB=y. However, these test cases have a variant of
using huge pages, which would mmap(MAP_HUGETLB) using these smaller sizes
than the system hugepag size. This results in the kernel aligning up the
smaller size to 512MB. If a memory was located between the upper 64/128MB
size boundary and the hugepage 512MB boundary, it would get wiped out:
https://lore.kernel.org/all/aEoUhPYIAizTLADq@nvidia.com/
Given that this aligning up behavior is well documented, we have no choice
but to allocate a hugepage aligned size to avoid this unintended wipe out.
Instead of relying on the kernel's internal force alignment, pass the same
size to posix_memalign() and map().
Also, fix the FIXTURE_TEARDOWN() misusing munmap() to free the memory from
posix_memalign(), as munmap() doesn't destroy the allocator meta data. So,
call free() instead.
Fixes: a9af47e382 ("iommufd/selftest: Test IOMMU_HWPT_GET_DIRTY_BITMAP")
Link: https://patch.msgid.link/r/1ea8609ae6d523fdd4d8efb179ddee79c8582cb6.1750787928.git.nicolinc@nvidia.com
Cc: stable@vger.kernel.org
Suggested-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Nicolin Chen <nicolinc@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit fa6f092cc0 ]
The `name` field in `obj->externs` points into the BTF data at initial
open time. However, some functions may invalidate this after opening and
before loading (e.g. `bpf_map__set_value_size`), which results in
pointers into freed memory and undefined behavior.
The simplest solution is to simply `strdup` these strings, similar to
the `essent_name`, and free them at the same time.
In order to test this path, the `global_map_resize` BPF selftest is
modified slightly to ensure the presence of an extern, which causes this
test to fail prior to the fix. Given there isn't an obvious API or error
to test against, I opted to add this to the existing test as an aspect
of the resizing feature rather than duplicate the test.
Fixes: 9d0a23313b ("libbpf: Add capability for resizing datasec maps")
Signed-off-by: Adin Scannell <amscanne@meta.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20250625050215.2777374-1-amscanne@meta.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit aa485e8789 ]
When btf_dump__new() fails to allocate memory for the internal hashmap
(btf_dump->type_names), it returns an error code. However, the cleanup
function btf_dump__free() does not check if btf_dump->type_names is NULL
before attempting to free it. This leads to a null pointer dereference
when btf_dump__free() is called on a btf_dump object.
Fixes: 351131b51c ("libbpf: add btf_dump API for BTF-to-C conversion")
Signed-off-by: Yuan Chen <chenyuan@kylinos.cn>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20250618011933.11423-1-chenyuan_fl@163.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit b69d4413aa upstream.
The netkit program is not a cgroup bpf program and should not be shown
in the output of the "bpftool cgroup show" command.
However, if the netkit device happens to have ifindex 3,
the "bpftool cgroup show" command will output the netkit
bpf program as well:
> ip -d link show dev nk1
3: nk1@if2: ...
link/ether ...
netkit mode ...
> bpftool net show
tc:
nk1(3) netkit/peer tw_ns_nk2phy prog_id 469447
> bpftool cgroup show /sys/fs/cgroup/...
ID AttachType AttachFlags Name
... ... ...
469447 netkit_peer tw_ns_nk2phy
The reason is that the target_fd (which is the cgroup_fd here) and
the target_ifindex are in a union in the uapi/linux/bpf.h. The bpftool
iterates all values in "enum bpf_attach_type" which includes
non cgroup attach types like netkit. The cgroup_fd is usually 3 here,
so the bug is triggered when the netkit ifindex just happens
to be 3 as well.
The bpftool's cgroup.c already has a list of cgroup-only attach type
defined in "cgroup_attach_types[]". This patch fixes it by iterating
over "cgroup_attach_types[]" instead of "__MAX_BPF_ATTACH_TYPE".
Cc: Quentin Monnet <qmo@kernel.org>
Reported-by: Takshak Chahande <ctakshak@meta.com>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Quentin Monnet <qmo@kernel.org>
Link: https://lore.kernel.org/r/20250507203232.1420762-1-martin.lau@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit ebec62bc7e ]
Add missing close() to avoid leaking perf events.
In past perfs this mattered little as the function was just used by 'perf
list'.
As the function is now used to detect hybrid PMUs leaking the perf event
is somewhat more painful.
Fixes: b41f1cec91 ("perf list: Skip unsupported events")
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Namhyung Kim <namhyung.kim@lge.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Tiezhu Yang <yangtiezhu@loongson.cn>
Link: https://lore.kernel.org/r/20250614004108.1650988-2-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit ead7f9b8de upstream.
In Cilium, we use bpf_csum_diff + bpf_l4_csum_replace to, among other
things, update the L4 checksum after reverse SNATing IPv6 packets. That
use case is however not currently supported and leads to invalid
skb->csum values in some cases. This patch adds support for IPv6 address
changes in bpf_l4_csum_update via a new flag.
When calling bpf_l4_csum_replace in Cilium, it ends up calling
inet_proto_csum_replace_by_diff:
1: void inet_proto_csum_replace_by_diff(__sum16 *sum, struct sk_buff *skb,
2: __wsum diff, bool pseudohdr)
3: {
4: if (skb->ip_summed != CHECKSUM_PARTIAL) {
5: csum_replace_by_diff(sum, diff);
6: if (skb->ip_summed == CHECKSUM_COMPLETE && pseudohdr)
7: skb->csum = ~csum_sub(diff, skb->csum);
8: } else if (pseudohdr) {
9: *sum = ~csum_fold(csum_add(diff, csum_unfold(*sum)));
10: }
11: }
The bug happens when we're in the CHECKSUM_COMPLETE state. We've just
updated one of the IPv6 addresses. The helper now updates the L4 header
checksum on line 5. Next, it updates skb->csum on line 7. It shouldn't.
For an IPv6 packet, the updates of the IPv6 address and of the L4
checksum will cancel each other. The checksums are set such that
computing a checksum over the packet including its checksum will result
in a sum of 0. So the same is true here when we update the L4 checksum
on line 5. We'll update it as to cancel the previous IPv6 address
update. Hence skb->csum should remain untouched in this case.
The same bug doesn't affect IPv4 packets because, in that case, three
fields are updated: the IPv4 address, the IP checksum, and the L4
checksum. The change to the IPv4 address and one of the checksums still
cancel each other in skb->csum, but we're left with one checksum update
and should therefore update skb->csum accordingly. That's exactly what
inet_proto_csum_replace_by_diff does.
This special case for IPv6 L4 checksums is also described atop
inet_proto_csum_replace16, the function we should be using in this case.
This patch introduces a new bpf_l4_csum_replace flag, BPF_F_IPV6,
to indicate that we're updating the L4 checksum of an IPv6 packet. When
the flag is set, inet_proto_csum_replace_by_diff will skip the
skb->csum update.
Fixes: 7d672345ed ("bpf: add generic bpf_csum_diff helper")
Signed-off-by: Paul Chaignon <paul.chaignon@gmail.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://patch.msgid.link/96a6bc3a443e6f0b21ff7b7834000e17fb549e05.1748509484.git.paul.chaignon@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Paul Chaignon <paul.chaignon@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 081056dc00 upstream.
Currently, __split_vma() triggers hugetlb page table unsharing through
vm_ops->may_split(). This happens before the VMA lock and rmap locks are
taken - which is too early, it allows racing VMA-locked page faults in our
process and racing rmap walks from other processes to cause page tables to
be shared again before we actually perform the split.
Fix it by explicitly calling into the hugetlb unshare logic from
__split_vma() in the same place where THP splitting also happens. At that
point, both the VMA and the rmap(s) are write-locked.
An annoying detail is that we can now call into the helper
hugetlb_unshare_pmds() from two different locking contexts:
1. from hugetlb_split(), holding:
- mmap lock (exclusively)
- VMA lock
- file rmap lock (exclusively)
2. hugetlb_unshare_all_pmds(), which I think is designed to be able to
call us with only the mmap lock held (in shared mode), but currently
only runs while holding mmap lock (exclusively) and VMA lock
Backporting note:
This commit fixes a racy protection that was introduced in commit
b30c14cd61 ("hugetlb: unshare some PMDs when splitting VMAs"); that
commit claimed to fix an issue introduced in 5.13, but it should actually
also go all the way back.
[jannh@google.com: v2]
Link: https://lkml.kernel.org/r/20250528-hugetlb-fixes-splitrace-v2-1-1329349bad1a@google.com
Link: https://lkml.kernel.org/r/20250528-hugetlb-fixes-splitrace-v2-0-1329349bad1a@google.com
Link: https://lkml.kernel.org/r/20250527-hugetlb-fixes-splitrace-v1-1-f4136f5ec58a@google.com
Fixes: 39dde65c99 ("[PATCH] shared page table for hugetlb page")
Signed-off-by: Jann Horn <jannh@google.com>
Cc: Liam Howlett <liam.howlett@oracle.com>
Reviewed-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Reviewed-by: Oscar Salvador <osalvador@suse.de>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: <stable@vger.kernel.org> [b30c14cd61: hugetlb: unshare some PMDs when splitting VMAs]
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
[stable backport: added missing include]
Signed-off-by: Jann Horn <jannh@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f287822688 upstream.
When FRED is enabled, if the Trap Flag (TF) is set without an external
debugger attached, it can lead to an infinite loop in the SIGTRAP
handler. To avoid this, the software event flag in the augmented SS
must be cleared, ensuring that no single-step trap remains pending when
ERETU completes.
This test checks for that specific scenario—verifying whether the kernel
correctly prevents an infinite SIGTRAP loop in this edge case when FRED
is enabled.
The test should _always_ pass with IDT event delivery, thus no need to
disable the test even when FRED is not enabled.
Signed-off-by: Xin Li (Intel) <xin@zytor.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Tested-by: Sohil Mehta <sohil.mehta@intel.com>
Cc:stable@vger.kernel.org
Link: https://lore.kernel.org/all/20250609084054.2083189-3-xin%40zytor.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 8e64c387c9 ]
Recently as a side-effect of
commit ac053946f5 ("compiler.h: introduce TYPEOF_UNQUAL() macro")
issues were observed in deduplication between modules and kernel BTF
such that a large number of kernel types were not deduplicated so
were found in module BTF (task_struct, bpf_prog etc). The root cause
appeared to be a failure to dedup struct types, specifically those
with members that were pointers with __percpu annotations.
The issue in dedup is at the point that we are deduplicating structures,
we have not yet deduplicated reference types like pointers. If multiple
copies of a pointer point at the same (deduplicated) integer as in this
case, we do not see them as identical. Special handling already exists
to deal with structures and arrays, so add pointer handling here too.
Reported-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Alan Maguire <alan.maguire@oracle.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20250429161042.2069678-1-alan.maguire@oracle.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d0445d7dd3 ]
Avoid dereferencing bpf_map_skeleton's link field if it's NULL.
If BPF map skeleton is created with the size, that indicates containing
link field, but the field was not actually initialized with valid
bpf_link pointer, libbpf crashes. This may happen when using libbpf-rs
skeleton.
Skeleton loading may still progress, but user needs to attach struct_ops
map separately.
Signed-off-by: Mykyta Yatsenko <yatsenko@meta.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20250514113220.219095-1-mykyta.yatsenko5@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4e29128a9a ]
libbpf handling of split BTF has been written largely with the
assumption that multiple splits are possible, i.e. split BTF on top of
split BTF on top of base BTF. One area where this does not quite work
is string handling in split BTF; the start string offset should be the
base BTF string section length + the base BTF string offset. This
worked in the past because for a single split BTF with base the start
string offset was always 0.
Signed-off-by: Alan Maguire <alan.maguire@oracle.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20250519165935.261614-2-alan.maguire@oracle.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit a298bbab90 upstream.
When cross compiling the kernel with clang, we need to override
CLANG_CROSS_FLAGS when preparing the step libraries.
Prior to commit d1d0963121 ("tools: fix annoying "mkdir -p ..." logs
when building tools in parallel"), MAKEFLAGS would have been set to a
value that wouldn't set a value for CLANG_CROSS_FLAGS, hiding the
fact that we weren't properly overriding it.
Fixes: 56a2df7615 ("tools/resolve_btfids: Compile resolve_btfids as host program")
Signed-off-by: Suleiman Souhlal <suleiman@google.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/bpf/20250606074538.1608546-1-suleiman@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit cbeaa41dfe upstream.
Developers are indeed hitting other of the `noreturn` slice symbols in
Nova [1], thus relax the last check in the list so that we catch all of
them, i.e.
*_4core5slice5index22slice_index_order_fail
*_4core5slice5index24slice_end_index_len_fail
*_4core5slice5index26slice_start_index_len_fail
*_4core5slice5index29slice_end_index_overflow_fail
*_4core5slice5index31slice_start_index_overflow_fail
These all exist since at least Rust 1.78.0, thus backport it too.
See commit 56d680dd23 ("objtool/rust: list `noreturn` Rust functions")
for more details.
Cc: stable@vger.kernel.org # Needed in 6.12.y and later.
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Timur Tabi <ttabi@nvidia.com>
Cc: Kane York <kanepyork@gmail.com>
Cc: Josh Poimboeuf <jpoimboe@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Reported-by: Joel Fernandes <joelagnelf@nvidia.com>
Fixes: 56d680dd23 ("objtool/rust: list `noreturn` Rust functions")
Closes: https://lore.kernel.org/rust-for-linux/20250513180757.GA1295002@joelnvbox/ [1]
Tested-by: Joel Fernandes <joelagnelf@nvidia.com>
Link: https://lore.kernel.org/r/20250520185555.825242-1-ojeda@kernel.org
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit adb49732c8 ]
commit 05a2f07db8 ("tools/power turbostat: read RAPL counters via
perf") that adds support to read RAPL counters via perf defines the
notion of a RAPL domain_id which is set to physical_core_id on
platforms which support per_core_rapl counters (Eg: AMD processors
Family 17h onwards) and is set to the physical_package_id on all the
other platforms.
However, the physical_core_id is only unique within a package and on
platforms with multiple packages more than one core can have the same
physical_core_id and thus the same domain_id. (For eg, the first cores
of each package have the physical_core_id = 0). This results in all
these cores with the same physical_core_id using the same entry in the
rapl_counter_info_perdomain[]. Since rapl_perf_init() skips the
perf-initialization for cores whose domain_ids have already been
visited, cores that have the same physical_core_id always read the
perf file corresponding to the physical_core_id of the first package
and thus the package-energy is incorrectly reported to be the same
value for different packages.
Note: This issue only arises when RAPL counters are read via perf and
not when they are read via MSRs since in the latter case the MSRs are
read separately on each core.
Fix this issue by associating each CPU with rapl_core_id which is
unique across all the packages in the system.
Fixes: 05a2f07db8 ("tools/power turbostat: read RAPL counters via perf")
Signed-off-by: Gautham R. Shenoy <gautham.shenoy@amd.com>
Signed-off-by: Len Brown <len.brown@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d3f2a9587e ]
We have the logic to include net/lib automatically for net related
selftests. However, currently, this logic is only in install target
which means only `make install` will have net/lib included. This commit
adds the logic to all target so that all `make`, `make run_tests` and
`make install` will have net/lib included in net related selftests.
Signed-off-by: Bui Quang Minh <minhquangbui99@gmail.com>
Link: https://patch.msgid.link/20250601142914.13379-1-minhquangbui99@gmail.com
Fixes: b86761ff63 ("selftests: net: add scaffolding for Netlink tests in Python")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a913ef6fd8 ]
Dropping symbols also meant the callchain maps wasn't populated, but
the callchain map is needed to find the DSO.
Plumb the symbols option better, falling back to thread__find_map()
rather than thread__find_symbol() when symbols are disabled.
Fixes: 02b2705017 ("perf callchain: Allow symbols to be optional when resolving a callchain")
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Athira Rajeev <atrajeev@linux.ibm.com>
Cc: Ben Gainey <ben.gainey@arm.com>
Cc: Chaitanya S Prakash <chaitanyas.prakash@arm.com>
Cc: Charlie Jenkins <charlie@rivosinc.com>
Cc: Chun-Tse Shao <ctshao@google.com>
Cc: Colin Ian King <colin.i.king@gmail.com>
Cc: Dmitriy Vyukov <dvyukov@google.com>
Cc: Dr. David Alan Gilbert <linux@treblig.org>
Cc: Graham Woodward <graham.woodward@arm.com>
Cc: Howard Chu <howardchu95@gmail.com>
Cc: Ilkka Koskinen <ilkka@os.amperecomputing.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Krzysztof Łopatowski <krzysztof.m.lopatowski@gmail.com>
Cc: Leo Yan <leo.yan@linux.dev>
Cc: Levi Yun <yeoreum.yun@arm.com>
Cc: Li Huafei <lihuafei1@huawei.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Martin Liška <martin.liska@hey.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Matt Fleming <matt@readmodwrite.com>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: Song Liu <song@kernel.org>
Cc: Steinar H. Gunderson <sesse@google.com>
Cc: Stephen Brennan <stephen.s.brennan@oracle.com>
Cc: Steve Clevenger <scclevenger@os.amperecomputing.com>
Cc: Thomas Falcon <thomas.falcon@intel.com>
Cc: Veronika Molnarova <vmolnaro@redhat.com>
Cc: Weilin Wang <weilin.wang@intel.com>
Cc: Will Deacon <will@kernel.org>
Cc: Yicong Yang <yangyicong@hisilicon.com>
Cc: Yujie Liu <yujie.liu@intel.com>
Cc: Zhongqiu Han <quic_zhonhan@quicinc.com>
Cc: Zixian Cai <fzczx123@gmail.com>
Link: https://lore.kernel.org/r/20250529044000.759937-2-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8c56bfe53b ]
The 'rseq' and 'set_robust_list' syscalls don't return a pid, so set
errpid for both to false.
Fixes: 0c1019e346 ("perf trace: Mark the 'rseq' arg in the rseq syscall as coming from user space")
Fixes: 1de5b5dcb8 ("perf trace: Mark the 'head' arg in the set_robust_list syscall as coming from user space")
Signed-off-by: Anubhav Shelat <ashelat@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Dapeng Mi <dapeng1.mi@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20250529143334.1469669-2-ashelat@redhat.com
[ Remove explicit .errpid = false, omitting its initialization zeroes it, as noted by Namhyung ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c7a48ea9b9 ]
The syscalls that were consistently observed were set_robust_list and
rseq. This is because perf cannot find their child process.
This change ensures that the return value is always printed.
Before:
0.256 ( 0.001 ms): set_robust_list(head: 0x7f09c77dba20, len: 24) =
0.259 ( 0.001 ms): rseq(rseq: 0x7f09c77dc0e0, rseq_len: 32, sig: 1392848979) =
After:
0.270 ( 0.002 ms): set_robust_list(head: 0x7f0bb14a6a20, len: 24) = 0
0.273 ( 0.002 ms): rseq(rseq: 0x7f0bb14a70e0, rseq_len: 32, sig: 1392848979) = 0
Committer notes:
As discussed in the thread in the Link: tag below, these two don't
return a pid, but for syscalls returning one, we need to print the
result and if we manage to find the children in 'perf trace' data
structures, then print its name as well.
Fixes: 11c8e39f51 ("perf trace: Infrastructure to show COMM strings for syscalls returning PIDs")
Reviewed-by: Howard Chu <howardchu95@gmail.com>
Signed-off-by: Anubhav Shelat <ashelat@redhat.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Dapeng Mi <dapeng1.mi@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20250403160411.159238-2-ashelat@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
