mirror of
https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/
synced 2026-11-10 20:48:12 +00:00
28,234 commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
Linus Torvalds
|
b85966adbf |
Networking changes for 7.2.
Core & protocols
----------------
- Work on removing rtnl_lock protection throughout the stack continues.
In this chapter:
- don't use rtnl_lock for IPv6 multicast routing configuration
- don't take rtnl_lock in ethtool for modern drivers
- prepare Qdisc dump callbacks for rtnl_lock removal
- Support dumping just ifindex + name of all interfaces, under RCU.
It's a common operation for Netlink CLI tools (when translating
names to ifindexes) and previously required full rtnl_lock.
- Support dumping qdiscs and page pools for a specific netdev. Even tho
user space wants a dump of all netdevs, most of the time, the OOO
programming model results in repeating the dump for each netdev.
Which, in absence of a cache, leads to a O(n^2) behavior.
- Flush nexthops once on multi-nexthop removal (e.g. when device goes
down), another O(n^2) -> O(n) improvement.
- Rehash locally generated traffic to a different nexthop on retransmit
timeout.
- Honor oif when choosing nexthop for locally generated IPv6 traffic.
- Convert TCP Auth Option to crypto library, and drop non-RFC algos.
- Increase subflow limits in MPTCP to 64 and endpoint limit to 256.
- Support MPTCP signaling of IPv6 address + port (ADD_ADDR). We need
to selectively skip reporting of the standard TCP Timestamp option,
because they won't fit into the header space together (12 + 30 > 40).
- Support using bridge neighbor suppression, Duplicate Address
Detection, Gratuitous ARP and unsolicited NA forwarding - in EVPN
deployments, e.g. VXLAN fabrics (IPv4 and IPv6).
- Improve link state reporting for upper netdevs (e.g. macvlan) over
tunnel devices (again, mostly for EVPN deployments).
- Support binding GENEVE tunnels to a local address.
- Speed up UDP tunnel destruction (remove one synchronize_rcu()).
- Support exponential field encoding in multicast (IGMPv3 and MLDv2).
- Support attaching PSP crypto offload to containers (veth, netkit).
- Add a new IPSec Netlink message XFRM_MSG_MIGRATE_STATE that allows
migrating individual IPsec SAs independently of their policies.
The existing XFRM_MSG_MIGRATE is tightly coupled to policy+SA
migration, lacks SPI for unique SA identification, and cannot express
reqid changes or migrate Transport mode selectors. The new interface
identifies the SA via SPI and mark, supports reqid changes, address
family changes, encap removal, and uses an atomic create+install
flow under x->lock to prevent SN/IV reuse during AEAD SA migration.
- Implement GRO/GSO support for PPPoE.
- Convert sockopt callbacks in a number of protocols to iov_iter.
Cross-tree stuff
----------------
- Remove support for Crypto TFM cloning (unblocked after the TCP Auth
Option rework). This feature regressed performance for all crypto API
users, since it changed crypto transformation objects into reference-
-counted objects.
- Add FCrypt-PCBC implementation to rxrpc and remove it from the global
crypto API as obsolete and insecure.
Wireless
--------
- Major rework of station bandwidth handling, fixing issues with lower
capability than AP.
- Cleanups for EMLSR spec issues (drafts differed).
- More Neighbor Awareness Networking (Wi-Fi Aware) work (multicast,
schedule improvements, multi-station etc.)
- Some Ultra High Reliability (UHR) / IEEE 802.11bn (D1.4) work
(e.g. non-primary channel access, UHR DBE support).
- Fine Timing Measurement ranging (i.e. distance measurement) APIs.
Netfilter
---------
- Use per-rule hash initval in nf_conncount. This avoids unnecessary
lock contention with short keys (e.g. conntrack zones) in different
namespaces.
- Various safety improvements, both in packet parsing and object
lifetimes. Notably add refcounts to conntrack timeout policy.
Deletions
---------
- Remove TLS + sockmap integration. TLS wants to pin user pages
to avoid a copy, and sockmap wants to write to the input stream.
More work on this integration is clearly needed, and we can't find
any users (original author admitted that they never deployed it).
- Remove support for TLS offload with TCP Offload Engine (the far
more common opportunistic offload is retained). The locking looks
unfixable (driver sleeps under TCP spin locks) and people from
the vendor that added this are AWOL.
- Remove more ATM code, trying to leave behind only what PPPoATM needs,
AAL5 and br2684 with permanent circuits.
- Remove AppleTalk. Let it join hamradio in our out of tree protocol
graveyard, I mean, repository.
- Disable 32-bit x_tables compatibility (32bit binaries on 64bit kernel)
interface in user namespaces. To be deleted completely, soon.
- Remove 5/10 MHz support from cfg80211/mac80211.
Drivers
-------
- Software:
- Support DEVMEM/DMABUF Tx over NETMEM_TX_NO_DMA devices (netkit).
- bonding: add knob to strictly follow 802.3ad for link state.
- New drivers:
- Alibaba Elastic Ethernet Adaptor (cloud vNIC).
- NXP NETC switch within i.MX94.
- DPLL:
- Add operational state to pins (implement in zl3073x).
- Add generic DPLL type, for daisy-chaining DPLLs (implement in ice).
- Ethernet high-speed NICs:
- Huawei (hinic3):
- enhance tc flow offload support with queue selection, tunnels
- nVidia/Mellanox:
- avoid over-copying payload to the skb's linear part (up to 60%
win for LRO on slow CPUs like ARM64 V2)
- expose more per-queue stats over the standard API
- support additional, unprivileged PFs in the DPU configuration
- support Socket Direct (multi-PF) with switchdev offloads
- add a pool / frag allocator for DMA mapped buffers for control
objects, save memory on systems with 64kB page size
- take advantage of the ability to dynamically change RSS table
size, even when table is configured by the user
- increase the max RSS table size for even traffic distribution
- Ethernet NICs:
- Marvell/Aquantia:
- AQC113 PTP support
- Realtek USB (r8152):
- support 10Gbit Link Speeds and Energy-Efficient Ethernet (EEE)
- support firmware loaded (for RTL8157/RTL8159)
- support for the RTL8159
- Intel (ixgbe):
- support Energy-Efficient Ethernet (EEE) on E610 devices
- Ethernet switches:
- Airoha:
- support multiple netdevs on a single GDM block / port
- Marvell (mv88e6xxx):
- support SERDES of mv88e6321
- Microchip (ksz8/9):
- rework the driver callbacks to remove one indirection layer
- Motorcomm (yt921x):
- support port rate policing
- support TBF qdisc offload
- support ACL/flower offload
- nVidia/Mellanox:
- expose per-PG rx_discards
- Realtek:
- rtl8365mb: bridge offloading and VLAN support
- Ethernet PHYs:
- Airoha:
- support Airoha AN8801R Gigabit PHYs.
- Micrel:
- implement 3 low-loss cable tunables
- Realtek:
- support MDI swapping for RTL8226-CG
- support MDIO for RTL931x
- Qualcomm:
- at803x: Rx and Tx clock management for IPQ5018 PHY
- Motorcomm:
- support YT8522 100M RMII PHY
- set drive strength in YT8531s RGMII
- TI:
- dp83822: add optional external PHY clock
- Bluetooth:
- hci_sync: add support for HCI_LE_Set_Host_Feature [v2]
- SMP: use AES-CMAC library API
- Intel:
- support Product level reset
- support smart trigger dump
- Mediatek:
- add event filter to filter specific event
- Realtek:
- fix RTL8761B/BU broken LE extended scan
- WiFi:
- Broadcom (b43):
- new support for a 11n device
- MediaTek (mt76):
- support mt7927
- mt792x: broken usb transport detection
- mt7921: regulatory improvements
- Qualcomm (ath9k):
- GPIO interface improvements
- Qualcomm (ath12k):
- WDS support
- replace dynamic memory allocation in WMI Rx path
- thermal throttling/cooling device support
- 6 GHz incumbent interference detection
- channel 177 in 5 GHz
- Realtek (rt89):
- RTL8922AU support
- USB 3 mode switch for performance
- better monitor radiotap support
- RTL8922DE preparations
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=oNfE
-----END PGP SIGNATURE-----
Merge tag 'net-next-7.2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Jakub Kicinski:
"Core & protocols:
- Work on removing rtnl_lock protection throughout the stack
continues. In this chapter:
- don't use rtnl_lock for IPv6 multicast routing configuration
- don't take rtnl_lock in ethtool for modern drivers
- prepare Qdisc dump callbacks for rtnl_lock removal
- Support dumping just ifindex + name of all interfaces, under RCU.
It's a common operation for Netlink CLI tools (when translating
names to ifindexes) and previously required full rtnl_lock.
- Support dumping qdiscs and page pools for a specific netdev. Even
tho user space wants a dump of all netdevs, most of the time, the
OOO programming model results in repeating the dump for each
netdev. Which, in absence of a cache, leads to a O(n^2) behavior.
- Flush nexthops once on multi-nexthop removal (e.g. when device goes
down), another O(n^2) -> O(n) improvement.
- Rehash locally generated traffic to a different nexthop on
retransmit timeout.
- Honor oif when choosing nexthop for locally generated IPv6 traffic.
- Convert TCP Auth Option to crypto library, and drop non-RFC algos.
- Increase subflow limits in MPTCP to 64 and endpoint limit to 256.
- Support MPTCP signaling of IPv6 address + port (ADD_ADDR). We need
to selectively skip reporting of the standard TCP Timestamp option,
because they won't fit into the header space together (12 + 30 >
40).
- Support using bridge neighbor suppression, Duplicate Address
Detection, Gratuitous ARP and unsolicited NA forwarding - in EVPN
deployments, e.g. VXLAN fabrics (IPv4 and IPv6).
- Improve link state reporting for upper netdevs (e.g. macvlan) over
tunnel devices (again, mostly for EVPN deployments).
- Support binding GENEVE tunnels to a local address.
- Speed up UDP tunnel destruction (remove one synchronize_rcu()).
- Support exponential field encoding in multicast (IGMPv3 and MLDv2).
- Support attaching PSP crypto offload to containers (veth, netkit).
- Add a new IPSec Netlink message XFRM_MSG_MIGRATE_STATE that allows
migrating individual IPsec SAs independently of their policies.
The existing XFRM_MSG_MIGRATE is tightly coupled to policy+SA
migration, lacks SPI for unique SA identification, and cannot
express reqid changes or migrate Transport mode selectors.
The new interface identifies the SA via SPI and mark, supports
reqid changes, address family changes, encap removal, and uses an
atomic create+install flow under x->lock to prevent SN/IV reuse
during AEAD SA migration.
- Implement GRO/GSO support for PPPoE.
- Convert sockopt callbacks in a number of protocols to iov_iter.
Cross-tree stuff:
- Remove support for Crypto TFM cloning (unblocked after the TCP Auth
Option rework). This feature regressed performance for all crypto
API users, since it changed crypto transformation objects into
reference-counted objects.
- Add FCrypt-PCBC implementation to rxrpc and remove it from the
global crypto API as obsolete and insecure.
Wireless:
- Major rework of station bandwidth handling, fixing issues with
lower capability than AP.
- Cleanups for EMLSR spec issues (drafts differed).
- More Neighbor Awareness Networking (Wi-Fi Aware) work (multicast,
schedule improvements, multi-station etc.)
- Some Ultra High Reliability (UHR) / IEEE 802.11bn (D1.4) work
(e.g. non-primary channel access, UHR DBE support).
- Fine Timing Measurement ranging (i.e. distance measurement) APIs.
Netfilter:
- Use per-rule hash initval in nf_conncount. This avoids unnecessary
lock contention with short keys (e.g. conntrack zones) in different
namespaces.
- Various safety improvements, both in packet parsing and object
lifetimes. Notably add refcounts to conntrack timeout policy.
Deletions:
- Remove TLS + sockmap integration. TLS wants to pin user pages to
avoid a copy, and sockmap wants to write to the input stream. More
work on this integration is clearly needed, and we can't find any
users (original author admitted that they never deployed it).
- Remove support for TLS offload with TCP Offload Engine (the far
more common opportunistic offload is retained). The locking looks
unfixable (driver sleeps under TCP spin locks) and people from the
vendor that added this are AWOL.
- Remove more ATM code, trying to leave behind only what PPPoATM
needs, AAL5 and br2684 with permanent circuits.
- Remove AppleTalk. Let it join hamradio in our out of tree protocol
graveyard, I mean, repository.
- Disable 32-bit x_tables compatibility (32bit binaries on 64bit
kernel) interface in user namespaces. To be deleted completely,
soon.
- Remove 5/10 MHz support from cfg80211/mac80211.
Drivers:
- Software:
- Support DEVMEM/DMABUF Tx over NETMEM_TX_NO_DMA devices (netkit)
- bonding: add knob to strictly follow 802.3ad for link state
- New drivers:
- Alibaba Elastic Ethernet Adaptor (cloud vNIC).
- NXP NETC switch within i.MX94.
- DPLL:
- Add operational state to pins (implement in zl3073x).
- Add generic DPLL type, for daisy-chaining DPLLs (implement in ice).
- Ethernet high-speed NICs:
- Huawei (hinic3):
- enhance tc flow offload support with queue selection,
tunnels
- nVidia/Mellanox:
- avoid over-copying payload to the skb's linear part (up to
60% win for LRO on slow CPUs like ARM64 V2)
- expose more per-queue stats over the standard API
- support additional, unprivileged PFs in the DPU
configuration
- support Socket Direct (multi-PF) with switchdev offloads
- add a pool / frag allocator for DMA mapped buffers for
control objects, save memory on systems with 64kB page size
- take advantage of the ability to dynamically change RSS
table size, even when table is configured by the user
- increase the max RSS table size for even traffic
distribution
- Ethernet NICs:
- Marvell/Aquantia:
- AQC113 PTP support
- Realtek USB (r8152):
- support 10Gbit Link Speeds and Energy-Efficient Ethernet
(EEE)
- support firmware loaded (for RTL8157/RTL8159)
- support for the RTL8159
- Intel (ixgbe):
- support Energy-Efficient Ethernet (EEE) on E610 devices
- Ethernet switches:
- Airoha:
- support multiple netdevs on a single GDM block / port
- Marvell (mv88e6xxx):
- support SERDES of mv88e6321
- Microchip (ksz8/9):
- rework the driver callbacks to remove one indirection layer
- Motorcomm (yt921x):
- support port rate policing
- support TBF qdisc offload
- support ACL/flower offload
- nVidia/Mellanox:
- expose per-PG rx_discards
- Realtek:
- rtl8365mb: bridge offloading and VLAN support
- Ethernet PHYs:
- Airoha:
- support Airoha AN8801R Gigabit PHYs.
- Micrel:
- implement 3 low-loss cable tunables
- Realtek:
- support MDI swapping for RTL8226-CG
- support MDIO for RTL931x
- Qualcomm:
- at803x: Rx and Tx clock management for IPQ5018 PHY
- Motorcomm:
- support YT8522 100M RMII PHY
- set drive strength in YT8531s RGMII
- TI:
- dp83822: add optional external PHY clock
- Bluetooth:
- hci_sync: add support for HCI_LE_Set_Host_Feature [v2]
- SMP: use AES-CMAC library API
- Intel:
- support Product level reset
- support smart trigger dump
- Mediatek:
- add event filter to filter specific event
- Realtek:
- fix RTL8761B/BU broken LE extended scan
- WiFi:
- Broadcom (b43):
- new support for a 11n device
- MediaTek (mt76):
- support mt7927
- mt792x: broken usb transport detection
- mt7921: regulatory improvements
- Qualcomm (ath9k):
- GPIO interface improvements
- Qualcomm (ath12k):
- WDS support
- replace dynamic memory allocation in WMI Rx path
- thermal throttling/cooling device support
- 6 GHz incumbent interference detection
- channel 177 in 5 GHz
- Realtek (rt89):
- RTL8922AU support
- USB 3 mode switch for performance
- better monitor radiotap support
- RTL8922DE preparations"
* tag 'net-next-7.2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1778 commits)
ipv4: fib_rule: Move fib4_rules_exit() to ->exit().
net: serialize netif_running() check in enqueue_to_backlog()
net: skmsg: preserve sg.copy across SG transforms
appletalk: move the protocol out of tree
appletalk: stop storing per-interface state in struct net_device
selftests/bpf: test that TLS crypto is rejected on a sockmap socket
selftests/bpf: drop the unused kTLS program from test_sockmap
selftests/bpf: remove sockmap + ktls tests
tls: remove dead sockmap (psock) handling from the SW path
tls: reject the combination of TLS and sockmap
atm: remove orphaned uAPI for deleted drivers, protocols and SVCs
atm: remove unused ATM PHY operations
atm: remove the unused pre_send and send_bh device operations
atm: remove the unused change_qos device operation
atm: remove SVC socket support and the signaling daemon interface
atm: remove the local ATM (NSAP) address registry
atm: remove dead SONET PHY ioctls
atm: remove the unused send_oam / push_oam callbacks
atm: remove AAL3/4 transport support
net: dsa: sja1105: fix lastused timestamp in flower stats
...
|
||
|
Linus Torvalds
|
36808d5e98 |
Driver core changes for 7.2-rc1
- deferred probe:
- Fix race where deferred probe timeout work could be permanently
canceled by using mod_delayed_work()
- Fix missing jiffies conversion in deferred_probe_extend_timeout()
- Guard timeout extension with delayed_work_pending() to prevent
premature firing
- Use system_percpu_wq instead of the deprecated system_wq
- Update deferred_probe_timeout documentation
- device:
- Replace direct struct device bitfield access (can_match, dma_iommu,
dma_skip_sync, dma_ops_bypass, state_synced, dma_coherent,
of_node_reused, offline, offline_disabled) with flag-based
accessors using bit operations
- Reject devices with unregistered buses
- Delete unused DEVICE_ATTR_PREALLOC()
- Add low-level device attribute macros with const show/store
callbacks, allowing device attributes to reside in read-only memory
- Move core device attributes to read-only memory
- Constify group array pointers in driver_add_groups() /
driver_remove_groups(), struct bus_type, and struct device_driver
- device property:
- Fix fwnode reference leak in fwnode_graph_get_endpoint_by_id()
- Initialize all fields of fwnode_handle in fwnode_init()
- Provide swnode_get()/swnode_put() wrappers around kobject_get/put()
- Allow passing struct software_node_ref_args pointers directly to
PROPERTY_ENTRY_REF()
- driver_override:
- Migrate amba, cdx, vmbus, and rpmsg to the generic driver_override
infrastructure, fixing a UAF from unsynchronized access to
driver_override in bus match() callbacks
- Remove the now-unused driver_set_override()
- firmware loader:
- Fix recursive lock deadlock in device_cache_fw_images() when async
work falls back to synchronous execution
- Fix device reference leak in firmware_upload_register()
- platform:
- Pass KBUILD_MODNAME through the platform driver registration macro
to create module symlinks in sysfs for built-in drivers; move
module_kset initialization to a pure_initcall and tegra cbb
registration to core_initcall to ensure correct ordering
- Pass THIS_MODULE implicitly through a coresight_init_driver() macro
- sysfs:
- Upgrade OOB write detection in sysfs_kf_seq_show() from printk to
WARN
- Add return value clamping to sysfs_kf_read()
- Rust:
- ACPI:
- Fix missing match data for PRP0001 by exporting
acpi_of_match_device()
- Auxiliary:
- Replace drvdata() with dedicated registration data on
auxiliary_device. drvdata() exposed the driver's bus device
private data beyond the driver's own scope, creating ordering
constraints and forcing the data to outlive all registrations
that access it. Registration data is instead scoped structurally
to the Registration object, making lifecycle ordering enforced
by construction rather than convention.
- Rust-native device driver lifetimes (HRT):
- Allow Rust device drivers to carry a lifetime parameter on their
bus device private data, tied to the device binding scope -- the
interval during which a bus device is bound to a driver. Device
resources like pci::Bar<'a> and IoMem<'a> can be stored directly
in the driver's bus device private data with a lifetime bounded
by the binding scope, so the compiler enforces at build time that
they do not outlive the binding. This removes Devres indirection
from every access site and eliminates try_access() failure paths
in destructors.
Bus driver traits use a Generic Associated Type (GAT)
Data<'bound> to introduce the lifetime on the private data,
rather than parameterizing the Driver trait itself. Auxiliary
registration data, where the lifetime is not introduced by a
trait callback but must be threaded through Registration, uses
the ForLt trait (a type-level abstraction for types generic over
a lifetime).
- Misc:
- Fix DT overlayed devices not probing by reverting the broken
treewide overlay fix and re-running fw_devlink consumer pickup when
an overlay is applied to a bound device
- Use root_device_register() for faux bus root device; add sanity
check for failed bus init
- Fix dev_has_sync_state() data race with READ_ONCE() and move it to
base.h
- Avoid spurious device_links warning when removing a device while
its supplier is unbinding
- Switch ISA bus to dynamic root device
- Fix suspicious RCU usage in kernfs_put()
- Remove devcoredump exit callback
- Constify devfreq_event_class
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQS2q/xV6QjXAdC7k+1FlHeO1qrKLgUCai1lNQAKCRBFlHeO1qrK
LjX1AP4kEb6SJdvBFlG/IJcG9vyqA7+Cig8OIlx9vEX7e7GvNwEAxL2HltAlAd5Q
cOIJOlu0uM+j1mn0JyuM9b0WJrxDLAA=
=E5mG
-----END PGP SIGNATURE-----
Merge tag 'driver-core-7.2-rc1' of gitolite.kernel.org:pub/scm/linux/kernel/git/driver-core/driver-core
Pull driver core updates from Danilo Krummrich:
"Deferred probe:
- Fix race where deferred probe timeout work could be permanently
canceled by using mod_delayed_work()
- Fix missing jiffies conversion in deferred_probe_extend_timeout()
- Guard timeout extension with delayed_work_pending() to prevent
premature firing
- Use system_percpu_wq instead of the deprecated system_wq
- Update deferred_probe_timeout documentation
device:
- Replace direct struct device bitfield access (can_match, dma_iommu,
dma_skip_sync, dma_ops_bypass, state_synced, dma_coherent,
of_node_reused, offline, offline_disabled) with flag-based
accessors using bit operations
- Reject devices with unregistered buses
- Delete unused DEVICE_ATTR_PREALLOC()
- Add low-level device attribute macros with const show/store
callbacks, allowing device attributes to reside in read-only memory
- Move core device attributes to read-only memory
- Constify group array pointers in driver_add_groups() /
driver_remove_groups(), struct bus_type, and struct device_driver
device property:
- Fix fwnode reference leak in fwnode_graph_get_endpoint_by_id()
- Initialize all fields of fwnode_handle in fwnode_init()
- Provide swnode_get()/swnode_put() wrappers around kobject_get/put()
- Allow passing struct software_node_ref_args pointers directly to
PROPERTY_ENTRY_REF()
driver_override:
- Migrate amba, cdx, vmbus, and rpmsg to the generic driver_override
infrastructure, fixing a UAF from unsynchronized access to
driver_override in bus match() callbacks
- Remove the now-unused driver_set_override()
firmware loader:
- Fix recursive lock deadlock in device_cache_fw_images() when async
work falls back to synchronous execution
- Fix device reference leak in firmware_upload_register()
platform:
- Pass KBUILD_MODNAME through the platform driver registration macro
to create module symlinks in sysfs for built-in drivers; move
module_kset initialization to a pure_initcall and tegra cbb
registration to core_initcall to ensure correct ordering
- Pass THIS_MODULE implicitly through a coresight_init_driver() macro
sysfs:
- Upgrade OOB write detection in sysfs_kf_seq_show() from printk to
WARN
- Add return value clamping to sysfs_kf_read()
Rust:
- ACPI:
Fix missing match data for PRP0001 by exporting
acpi_of_match_device()
- Auxiliary:
Replace drvdata() with dedicated registration data on
auxiliary_device. drvdata() exposed the driver's bus device private
data beyond the driver's own scope, creating ordering constraints
and forcing the data to outlive all registrations that access it.
Registration data is instead scoped structurally to the
Registration object, making lifecycle ordering enforced by
construction rather than convention.
- Rust-native device driver lifetimes (HRT):
Allow Rust device drivers to carry a lifetime parameter on their
bus device private data, tied to the device binding scope -- the
interval during which a bus device is bound to a driver. Device
resources like pci::Bar<'a> and IoMem<'a> can be stored directly in
the driver's bus device private data with a lifetime bounded by the
binding scope, so the compiler enforces at build time that they do
not outlive the binding. This removes Devres indirection from every
access site and eliminates try_access() failure paths in
destructors.
Bus driver traits use a Generic Associated Type (GAT) Data<'bound>
to introduce the lifetime on the private data, rather than
parameterizing the Driver trait itself. Auxiliary registration
data, where the lifetime is not introduced by a trait callback but
must be threaded through Registration, uses the ForLt trait (a
type-level abstraction for types generic over a lifetime).
Misc:
- Fix DT overlayed devices not probing by reverting the broken
treewide overlay fix and re-running fw_devlink consumer pickup when
an overlay is applied to a bound device
- Use root_device_register() for faux bus root device; add sanity
check for failed bus init
- Fix dev_has_sync_state() data race with READ_ONCE() and move it to
base.h
- Avoid spurious device_links warning when removing a device while
its supplier is unbinding
- Switch ISA bus to dynamic root device
- Fix suspicious RCU usage in kernfs_put()
- Remove devcoredump exit callback
- Constify devfreq_event_class"
* tag 'driver-core-7.2-rc1' of gitolite.kernel.org:pub/scm/linux/kernel/git/driver-core/driver-core: (81 commits)
software node: allow passing reference args to PROPERTY_ENTRY_REF()
driver core: platform: set mod_name in driver registration
coresight: pass THIS_MODULE implicitly through a macro
kernel: param: initialize module_kset in a pure_initcall
soc/tegra: cbb: Move driver registration from pure_initcall to core_initcall
firmware_loader: Fix recursive lock in device_cache_fw_images()
driver core: Use system_percpu_wq instead of system_wq
driver core: remove driver_set_override()
rpmsg: use generic driver_override infrastructure
Drivers: hv: vmbus: use generic driver_override infrastructure
cdx: use generic driver_override infrastructure
amba: use generic driver_override infrastructure
rust: devres: add 'static bound to Devres<T>
samples: rust: rust_driver_auxiliary: showcase lifetime-bound registration data
rust: auxiliary: generalize Registration over ForLt
rust: types: add `ForLt` trait for higher-ranked lifetime support
gpu: nova-core: separate driver type from driver data
samples: rust: rust_driver_pci: use HRT lifetime for Bar
rust: io: make IoMem and ExclusiveIoMem lifetime-parameterized
rust: pci: make Bar lifetime-parameterized
...
|
||
David Laight
|
41d3e102ed |
atm: drv: Replace strcpy() + strlcat() with snprintf()
Avoid string function that are due to be deprecated. Signed-off-by: David Laight <david.laight.linux@gmail.com> Link: https://patch.msgid.link/20260608095523.2606-36-david.laight.linux@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> |
||
HyeongJun An
|
96d47e40bf |
USB: serial: kl5kusb105: fix bulk-out buffer overflow
klsi_105_prepare_write_buffer() is called by the generic write path
with the bulk-out buffer and its size (bulk_out_size, 64 bytes). It
stores a two-byte length header at the start of the buffer and copies
the payload from the write fifo starting at buf + KLSI_HDR_LEN, but
passes the full buffer size as the number of bytes to copy:
count = kfifo_out_locked(&port->write_fifo, buf + KLSI_HDR_LEN,
size, &port->lock);
When the fifo holds at least size bytes, size bytes are copied starting
two bytes into the size-byte buffer, writing KLSI_HDR_LEN bytes past its
end. Copy at most size - KLSI_HDR_LEN bytes instead, leaving room for
the header as safe_serial already does.
Writing bulk_out_size or more bytes to the tty triggers a slab
out-of-bounds write, observed with KASAN by emulating the device with
dummy_hcd and raw-gadget:
BUG: KASAN: slab-out-of-bounds in kfifo_copy_out+0x83/0xc0
Write of size 64 at addr ffff888112c62202 by task python3
kfifo_copy_out
klsi_105_prepare_write_buffer [kl5kusb105]
usb_serial_generic_write_start [usbserial]
Allocated by task 139:
usb_serial_probe [usbserial]
The buggy address is located 2 bytes inside of allocated 64-byte region
The out-of-bounds write no longer occurs with this change applied.
Fixes:
|
||
Jack Wu
|
1938fb9fe3 |
USB: serial: option: add usb-id for Dell Wireless DW5826e-m
Add support for Dell DW5826e-m with USB-id 0x413c:0x81ea T: Bus=03 Lev=01 Prnt=01 Port=04 Cnt=01 Dev#= 8 Spd=480 MxCh= 0 D: Ver= 2.10 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=413c ProdID=81ea Rev= 5.04 S: Manufacturer=DELL S: Product=DW5826e-m Qualcomm Snapdragon X12 Global LTE-A S: SerialNumber=358988870177734 C:* #Ifs= 7 Cfg#= 1 Atr=a0 MxPwr=500mA A: FirstIf#=12 IfCount= 2 Cls=02(comm.) Sub=0e Prot=00 I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=usbfs E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=60 Driver=option E: Ad=84(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option E: Ad=86(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 4 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) E: Ad=87(I) Atr=03(Int.) MxPS= 64 Ivl=32ms I:* If#=12 Alt= 0 #EPs= 1 Cls=02(comm.) Sub=0e Prot=00 Driver=cdc_mbim E: Ad=88(I) Atr=03(Int.) MxPS= 64 Ivl=32ms I: If#=13 Alt= 0 #EPs= 0 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim I:* If#=13 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim E: Ad=8e(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=0f(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms Signed-off-by: Jack Wu <jackbb_wu@compal.com> Reviewed-by: Lars Melin <larsm17@gmail> Cc: stable@vger.kernel.org [ johan: reserve also interface 4 ] Signed-off-by: Johan Hovold <johan@kernel.org> |
||
Adrian Korwel
|
0fd2b00b2d |
USB: serial: io_ti: fix heap overflow in build_i2c_fw_hdr()
build_i2c_fw_hdr() allocates a fixed-size buffer of
(16*1024 - 512) + sizeof(struct ti_i2c_firmware_rec) bytes, then
copies le16_to_cpu(img_header->Length) bytes into it without
validating that Length fits within the available space after the
firmware record header.
img_header->Length is a __le16 from the firmware file and can be
up to 65535. check_fw_sanity() validates the total firmware size
but not img_header->Length specifically.
Fix by rejecting images where img_header->Length exceeds the
available destination space.
Fixes:
|
||
|
Adrian Korwel
|
183c1076ec |
USB: serial: io_ti: fix heap overflow in get_manuf_info()
get_manuf_info() reads le16_to_cpu(rom_desc->Size) bytes from the
device I2C EEPROM into a buffer allocated with kmalloc_obj(), which
is sizeof(struct edge_ti_manuf_descriptor) = 10 bytes.
The Size field comes from the device and is only validated (in
check_i2c_image()) to make sure the descriptor fits within
TI_MAX_I2C_SIZE (16384 bytes), not against the destination buffer size.
A malicious USB device can therefore set Size to any value up to 16377,
causing a heap overflow of up to 16367 bytes when plugged into a host
running this driver.
valid_csum() is called after read_rom() and also iterates
buffer[0..Size-1], compounding the out-of-bounds access.
Fix by rejecting descriptors with unexpected length before calling
read_rom().
Fixes:
|
||
Danilo Krummrich
|
56785dcb2e |
Linux 7.1-rc5
-----BEGIN PGP SIGNATURE----- iQFSBAABCgA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAmoTZAYeHHRvcnZhbGRz QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGKZ0H/A8Ti79DXqEl4M6V S1ZYfteuvyWCdygPfY7+CQsxS1EjfmeRXd0213n95jijUoXvAVe7HJ5FuroTltsF LYqH3CAedeEWMO1rIZjuDs5J1BzWAh7b0/QoanTlAjI1ZL8c3Btj/o//PoQfztiS HWlN/aCcsZTi9n0ewV9eQM9jdiuhBlpZujfDX90vYurxAB+3K2c1b0UN+Y4/zMXO 83zaDLMYhIh8cEaU52+23H9UpyfrT0B8n6YgqbU4ZBRIbgA1BC4gloT6B7OHFKfq PAfjAOBfpe43K8lLUyfbkfNohNblLOboiMmekdf+j2y4wqpCO64o6WigCrZtxtHe 9znkJpM= =H+I9 -----END PGP SIGNATURE----- Merge tag 'v7.1-rc5' into driver-core-next We need the driver-core fixes in here as well to build on top of. Signed-off-by: Danilo Krummrich <dakr@kernel.org> |
||
Greg Kroah-Hartman
|
645d4eda1d |
USB serial fixes for 7.1-rc5
Here are a number of fixes for memory corruption and information leaks due to missing endpoint and transfer sanity checks dating back to simpler times when we trusted our hardware. Included are also a fix for a recently added modem device id entry and some new modem devices ids. All but the last five commits have been in linux-next and with no reported issues. -----BEGIN PGP SIGNATURE----- iJEEABYKADkWIQQHbPq+cpGvN/peuzMLxc3C7H1lCAUCahFk5RsUgAAAAAAEAA5t YW51MiwyLjUrMS4xMiwyLDIACgkQC8XNwux9ZQhGwQEA8P0jl8Bfd7tSnjqDplH7 mVipmM3I8MBMN7ZiurSRfbMBAIOplkKAn6I3wyDoY2n+lTLUVWHcVeYFCtprkQ3Z pAoN =3zZY -----END PGP SIGNATURE----- Merge tag 'usb-serial-7.1-rc5' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial into usb-linus Johan writes: USB serial fixes for 7.1-rc5 Here are a number of fixes for memory corruption and information leaks due to missing endpoint and transfer sanity checks dating back to simpler times when we trusted our hardware. Included are also a fix for a recently added modem device id entry and some new modem devices ids. All but the last five commits have been in linux-next and with no reported issues. * tag 'usb-serial-7.1-rc5' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial: USB: serial: cypress_m8: validate interrupt packet headers USB: serial: safe_serial: fix memory corruption with small endpoint USB: serial: omninet: fix memory corruption with small endpoint USB: serial: mxuport: fix memory corruption with small endpoint USB: serial: cypress_m8: fix memory corruption with small endpoint USB: serial: option: add missing RSVD(5) flag for Rolling RW135R-GL USB: serial: option: add MeiG SRM813Q USB: serial: mct_u232: fix missing interrupt-in transfer sanity check USB: serial: mct_u232: fix memory corruption with small endpoint USB: serial: keyspan: fix missing indat transfer sanity check USB: serial: digi_acceleport: fix memory corruption with small endpoints USB: serial: belkin_sa: validate interrupt status length |
||
Zhang Cen
|
9f9bfc80c6 |
USB: serial: cypress_m8: validate interrupt packet headers
cypress_read_int_callback() parses the interrupt-in buffer according to the selected Cypress packet format. Format 1 has a two-byte status/count header and format 2 has a one-byte combined status/count header. The usb-serial core sizes the interrupt-in buffer from the endpoint descriptor's wMaxPacketSize, and successful interrupt transfers can complete short when URB_SHORT_NOT_OK is not set. Check that the completed packet contains the selected header before reading it. Malformed short reports are ignored and the interrupt URB is resubmitted through the existing retry path, preventing out-of-bounds header-byte reads. KASAN report as below: KASAN slab-out-of-bounds in cypress_read_int_callback+0x240/0x7f0 Read of size 1 Call trace: cypress_read_int_callback() (drivers/usb/serial/cypress_m8.c:1009) __usb_hcd_giveback_urb() dummy_timer() Fixes: |
||
Johan Hovold
|
438061ed1a |
USB: serial: safe_serial: fix memory corruption with small endpoint
Make sure that the bulk-out buffer size is at least eight bytes to avoid
user-controlled slab corruption in "safe" mode should a malicious device
report a smaller size.
Fixes:
|
||
|
Johan Hovold
|
60df93d30f |
USB: serial: omninet: fix memory corruption with small endpoint
Make sure that the bulk-out buffers are at least as large as the
hardcoded transfer size to avoid user-controlled slab corruption should
a malicious device report a smaller endpoint max packet size than
expected.
Fixes:
|
||
|
Johan Hovold
|
4085f0dbb1 |
USB: serial: mxuport: fix memory corruption with small endpoint
Make sure that the bulk-out endpoint max packet size is at least eight
bytes to avoid user-controlled slab corruption should a malicious device
report a smaller size.
Fixes:
|
||
|
Johan Hovold
|
e1a9d791fd |
USB: serial: cypress_m8: fix memory corruption with small endpoint
Make sure that the interrupt-out endpoint max packet size is at least
eight bytes to avoid user-controlled slab corruption or NULL-pointer
dereference should a malicious device report a smaller size.
Fixes:
|
||
Wentao Guan
|
5eb070769e |
USB: cdc-acm: Fix bit overlap and move quirk definitions to header
The VENDOR_CLASS_DATA_IFACE and ALWAYS_POLL_CTRL quirk flags added in commit |
||
Dan Carpenter
|
9ea06a3fbf |
usb: dwc2: Fix use after free in debug code
We're not allowed to dereference "urb" after calling
usb_hcd_giveback_urb() so save the urb->status ahead of time.
Fixes:
|
||
Xu Yang
|
8f6aa39265 |
usb: chipidea: core: convert ci_role_switch to local variable
When a system contains multiple USB controllers, the global ci_role_switch
variable may be overwritten by subsequent driver initialization code.
This can cause issues in the following cases:
- The 2nd ci_hdrc_probe() sees ci_role_switch.fwnode as non-NULL even
though the "usb-role-switch" property is not present for the controller.
- When the ci_hdrc device is unbound and bound again, ci_role_switch
fwnode will not be reassigned, and the old value will be used instead.
Convert ci_role_switch to a local variable to fix these issues.
Fixes:
|
||
Michael Bommarito
|
2796646f6d |
usb: gadget: f_fs: serialize DMABUF cancel against request completion
ffs_epfile_dmabuf_io_complete() calls usb_ep_free_request() on the
completed request but leaves priv->req, the back-pointer that
ffs_dmabuf_transfer() set on submission, pointing at the freed
memory. A later FUNCTIONFS_DMABUF_DETACH ioctl or
ffs_epfile_release() on the close path still sees priv->req
non-NULL under ffs->eps_lock:
if (priv->ep && priv->req)
usb_ep_dequeue(priv->ep, priv->req);
so usb_ep_dequeue() is called on a freed usb_request.
On dummy_hcd the dequeue path only walks a live queue and
pointer-compares, so the freed pointer reads without faulting and
KASAN requires an explicit check at the FunctionFS call site to
surface the use-after-free. On SG-capable in-tree UDCs the
dequeue path dereferences the supplied request immediately:
* chipidea's ep_dequeue() does
container_of(req, struct ci_hw_req, req) and reads
hwreq->req.status before acquiring its own lock.
* cdnsp's cdnsp_gadget_ep_dequeue() reads request->status first.
The narrower option of clearing priv->req via cmpxchg() in the
completion does not close the race: the completion runs without
eps_lock, so a cancel path holding eps_lock can still observe
priv->req non-NULL, race a concurrent completion that clears and
frees, and pass the freed pointer to usb_ep_dequeue(). A slightly
longer fix that moves the free into the cleanup work is needed.
Same class of lifetime race as the recent usbip-vudc timer fix [1].
Take eps_lock in the sole place that mutates priv->req from the
callback direction by moving usb_ep_free_request() out of the
completion into ffs_dmabuf_cleanup(), the existing work handler
scheduled by ffs_dmabuf_signal_done() on
ffs->io_completion_wq. Clear priv->req there under eps_lock
before freeing, and only clear if priv->req still names our
request (a subsequent ffs_dmabuf_transfer() on the same
attachment may have queued a new one).
This keeps the existing dummy_hcd sync-dequeue invariant: the
completion callback is still invoked by the UDC without
eps_lock held (dummy_hcd drops its own lock before calling the
callback), and the callback now takes no f_fs lock at all.
Serialization against the cancel path happens in cleanup, which
runs from the workqueue with no f_fs lock held on entry.
The priv ref count protects the containing ffs_dmabuf_priv:
ffs_dmabuf_transfer() takes a ref via ffs_dmabuf_get(), cleanup
drops it via ffs_dmabuf_put(), so priv stays live for the
cleanup even after the cancel path's list_del + ffs_dmabuf_put.
The ffs_dmabuf_transfer() error path no longer frees usb_req
inline: fence->req and fence->ep are set before usb_ep_queue(),
so ffs_dmabuf_cleanup() (scheduled by the error-path
ffs_dmabuf_signal_done()) owns the free regardless of whether
the queue succeeded.
Reproduced under KASAN on both detach and close paths against
dummy_hcd with an observability hook
(kasan_check_byte(priv->req) immediately before usb_ep_dequeue)
at the two FunctionFS cancel sites to surface the stale-pointer
access; the hook is not part of this patch. The KASAN
allocator / free stacks in the captured splats identify the
same request: alloc in dummy_alloc_request, free in
dummy_timer, fault reached from ffs_epfile_release (close) and
from the FUNCTIONFS_DMABUF_DETACH ioctl (detach). With the
patch applied, both paths are silent under the same hook.
The bug is reached from the FunctionFS device node, which in
real deployments is owned by the privileged gadget daemon
(adbd, UMS, composite gadget services, etc.); it is not
reachable from unprivileged userspace or from a USB host on the
cable. FunctionFS mounts default to GLOBAL_ROOT_UID, but the
filesystem supports uid=, gid=, and fmode= delegation to a
non-root gadget daemon, so on real deployments the attacker may
be a less-privileged service rather than root.
Fixes:
|
||
|
Michael Bommarito
|
4e036c10e7 |
usb: gadget: f_fs: copy only received bytes on short ep0 read
ffs_ep0_read() allocates its control-OUT data buffer with
kmalloc() (not kzalloc) at the Length value from the Setup
packet, then copies that full len to userspace regardless of
how many bytes were actually received:
data = kmalloc(len, GFP_KERNEL);
...
ret = __ffs_ep0_queue_wait(ffs, data, len);
if ((ret > 0) && (copy_to_user(buf, data, len)))
ret = -EFAULT;
__ffs_ep0_queue_wait() returns req->actual, which on a short
control OUT transfer is strictly less than len. The
copy_to_user() call still copies len bytes, so on a short OUT
the last (len - ret) bytes of the kmalloc() buffer --
uninitialised slab residue -- are delivered to the FunctionFS
daemon.
Short ep0 OUT completions are specified USB control-transfer
behavior and are produced by in-tree UDCs:
* dwc2 continues on req->actual < req->length for ep0 DATA OUT
(short-not-ok is the only ep0-OUT stall path).
* aspeed_udc ends ep0 OUT on rx_len < ep->ep.maxpacket.
* renesas_usbf logs "ep0 short packet" and completes the
request.
* dwc3 stalls on short IN but not on short OUT.
A short ep0 OUT is therefore not evidence of a broken UDC; it is
a normal condition f_fs has to cope with. The sibling gadgetfs
implementation in drivers/usb/gadget/legacy/inode.c already does
this correctly via min(len, dev->req->actual) before
copy_to_user(). This patch brings f_fs.c to the same safe
pattern rather than trimming at a defensive layer.
The bug is reached from the FunctionFS device node, which in
real deployments is owned by the privileged gadget daemon
(adbd, UMS, composite gadget services, etc.); it is not
reachable from unprivileged userspace. Linux host stacks
normally reject short-wLength control OUTs before they reach
the gadget, so reproducing this required a build that
bypasses that host-side check. With the bypass in place, a
1-byte payload on a 64-byte Setup produces 63 bytes of
non-canary slab residue in the daemon's read buffer.
Fix by copying only ret (actually received) bytes to
userspace.
Fixes:
|
||
Seungjin Bae
|
7d9633528d |
usb: gadget: dummy_hcd: Reject hub port requests for non-existent ports
The `dummy_hub_control()` function handles USB hub class requests
to the virtual root hub. The `GetPortStatus` case returns -EPIPE for
requests with `wIndex != 1`, since the virtual root hub has only a
single port. However, the `ClearPortFeature` and `SetPortFeature`
cases lack the same check.
Fix this by extending the `wIndex != 1` rejection to both cases,
matching the existing behavior of `GetPortStatus`.
Fixes:
|
||
|
Michael Bommarito
|
d96209626a |
usbip: vudc: Fix use after free bug in vudc_remove due to race condition
This patch follows up Zheng Wang's 2023 report of a use-after-free in
vudc_remove(). The original thread stalled on Shuah Khan's request for
runtime testing of the unplug/unbind path. This patch supplies that
testing and keeps Zheng's original fix shape.
In vudc_probe(), v_init_timer() binds udc->tr_timer.timer to v_timer().
usbip_sockfd_store() starts the timer via v_start_timer()/v_kick_timer().
vudc_remove() can then free the containing struct vudc while the timer is
still pending or executing.
KASAN confirms the race on an unpatched x86_64 QEMU guest with
CONFIG_KASAN=y, CONFIG_USBIP_VUDC=y, CONFIG_USB_ZERO=y, and a tight loop
that repeatedly writes a socket fd to usbip_sockfd, closes the socket
pair, and unbinds/rebinds usbip-vudc.0:
BUG: KASAN: slab-use-after-free in __run_timer_base.part.0+0x8ba/0x8e0
Write of size 8 at addr ffff888001b80740 by task trigger_and_unb/239
Allocated by task 239:
vudc_probe+0x4d/0xaa0
Freed by task 239:
kfree+0x18f/0x520
device_release_driver_internal+0x388/0x540
unbind_store+0xd9/0x100
This lands in the timer core rather than v_timer() itself because the
embedded timer_list is being walked after its containing struct vudc has
already been freed. The underlying lifetime bug is the same one Zheng
reported.
With v_stop_timer() called from vudc_remove() and the timer deleted
synchronously, the same harness completed 5000 bind/unbind iterations
with no KASAN report.
Fixes:
|
||
Sam Burkels
|
b53ebb811e |
usb: storage: Add quirks for PNY Elite Portable SSD
The PNY Elite Portable SSD (USB ID 154b:f009) is a sibling of the
already-quirked PNY Pro Elite SSDs (154b:f00b and 154b:f00d). Like its
siblings, it uses a Phison-based USB-SATA bridge that exhibits
firmware bugs when bound to the uas driver.
Without quirks, the device fails to complete READ CAPACITY commands
when accessed over UAS on a SuperSpeed (USB 3) port. The device
enumerates and reports as a SCSI direct-access device, but reports
zero logical blocks and never finishes spin-up:
usb 2-3: new SuperSpeed USB device number 8 using xhci_hcd
usb 2-3: New USB device found, idVendor=154b, idProduct=f009
usb 2-3: Product: PNY ELITE PSSD
usb 2-3: Manufacturer: PNY
scsi host0: uas
scsi 0:0:0:0: Direct-Access PNY PNY ELITE PSSD 0
sd 0:0:0:0: [sda] Spinning up disk...
[...10+ seconds of polling, no progress...]
sd 0:0:0:0: [sda] Read Capacity(16) failed: hostbyte=DID_ERROR
sd 0:0:0:0: [sda] Read Capacity(10) failed: hostbyte=DID_ERROR
sd 0:0:0:0: [sda] 0 512-byte logical blocks: (0 B/0 B)
Tested each individual quirk to find the minimum that fixes this:
- US_FL_NO_ATA_1X alone: device hangs on spin-up
- US_FL_NO_REPORT_OPCODES alone: works on USB 2.0, hangs on USB 3.0
- US_FL_NO_ATA_1X | US_FL_NO_REPORT_OPCODES: works on both
With both quirks the device enumerates correctly while still using
the uas driver, and delivers full UAS throughput (~281 MB/s
sequential read on a USB 3.0 Gen 1 port).
The existing PNY Pro Elite entries (f00b, f00d) only set NO_ATA_1X,
but this device additionally chokes on REPORT OPCODES under
SuperSpeed.
Signed-off-by: Sam Burkels <sam@1a38.nl>
Acked-by: Oliver Neukum <oneukum@suse.com>
Cc: stable <stable@kernel.org>
Link: https://patch.msgid.link/20260501132346.86572-1-sam@1a38.nl
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
||
Stephen J. Fuhry
|
9ddb9c0dec |
USB: quirks: add NO_LPM for Lenovo ThinkPad USB-C Dock Gen2 hub controllers
The Lenovo ThinkPad USB-C Dock Gen2 (17ef:a391, 17ef:a392) hub controllers exhibit link instability when USB Link Power Management is enabled, similar to the dock's Ethernet adapter (17ef:a387) which already carries USB_QUIRK_NO_LPM. When the dock reconnects after a transient disconnect, the hub controllers enter LPM states between re-enumeration retries, causing repeated disconnect/reconnect cycles lasting up to two minutes. Disabling LPM for these devices restores stable enumeration. Signed-off-by: Stephen J. Fuhry <fuhrysteve@gmail.com> Cc: stable <stable@kernel.org> Link: https://patch.msgid.link/20260513171419.44849-1-fuhrysteve@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
||
Heitor Alves de Siqueira
|
121d2f682b |
usb: usbtmc: reject interrupt endpoints with small wMaxPacketSize
The USB488 subclass specification requires interrupt wMaxPacketSize to
be 0x02, unless the device sends vendor-specific notifications.
Endpoints that advertise less than 2 bytes for wMaxPacketSize are
unlikely to work with the current driver, as URBs will not have enough
space for interrupt headers. Considering that any notification URBs will
be ignored by the driver, reject these endpoints early during probe.
Fixes:
|
||
|
Heitor Alves de Siqueira
|
52f2ad3f7e |
usb: usbtmc: check URB actual_length for interrupt-IN notifications
USBTMC devices can use an optional interrupt endpoint for notification
messages. These typically contain two-byte headers indicating the
payload format, but the driver does not check if these headers are
present before accessing the data buffers. In cases where the URB
actual_length is not enough to fit these headers, the driver will either
cause an out-of-bounds read, or consume stale leftover data from a
previous notification.
Fix by checking if actual_data contains enough bytes for the headers,
otherwise resubmit URB to the interrupt endpoint.
Fixes:
|
||
Wei-Cheng Chen
|
5a4c828b8b |
xhci: tegra: Fix ghost USB device on dual-role port unplug
When a USB device is unplugged from the dual-role port, the device-mode
path in tegra_xhci_id_work() explicitly clears both SS and HS port power
via direct hub_control ClearPortFeature(POWER) calls. This preempts the
xHCI controller's normal disconnect processing -- PORT_CSC is never
generated, the USB core never sees the disconnect, and the device remains
in its internal tree as a ghost visible in lsusb.
Add an otg_set_port_power flag to control whether the dual-role switch
path performs explicit port power management. SoCs that need it
(Tegra124 / Tegra210 / Tegra186) set the flag; later SoCs (Tegra194 and
beyond) rely on the PHY mode change to handle disconnect naturally and
skip all port power calls.
Within the port power path, otg_reset_sspi additionally gates the SSPI
reset sequence on host-mode entry for SoCs that require it.
Flags set per SoC:
Tegra124, Tegra186 -> otg_set_port_power
Tegra210 -> otg_set_port_power, otg_reset_sspi
Tegra194 and later -> (none)
Fixes:
|
||
Kai Aizen
|
68aa70648b |
usb: gadget: uvc: hold opts->lock across XU walks in uvc_function_bind
uvc_function_bind() walks &opts->extension_units twice without holding
opts->lock:
- directly, for the iExtension string-descriptor fixup loop;
- indirectly, four times via uvc_copy_descriptors() (once per speed),
where the helper iterates uvc->desc.extension_units (which aliases
&opts->extension_units) to size and emit XU descriptors.
The configfs side (uvcg_extension_make / uvcg_extension_drop, in
drivers/usb/gadget/function/uvc_configfs.c) takes opts->lock around its
list_add_tail / list_del operations. A privileged userspace process
that holds the configfs subtree open and writes the gadget UDC name
to bind the function while concurrently rmdir()'ing an extensions
subdir can race uvcg_extension_drop() against the bind-time list walks
and dereference a freed struct uvcg_extension.
Hold opts->lock from the start of the XU string-descriptor fixup
through the last uvc_copy_descriptors() call, releasing on the
descriptor-error path via a new error_unlock label that drops the
lock before falling through to the existing error label. This
matches the locking discipline of the configfs callbacks and removes
the only remaining unsynchronised reader of the XU list during bind.
Reachability: only privileged processes that can mount configfs and
write to gadget UDC files can trigger the race, so this is a
correctness fix rather than a security boundary.
Fixes:
|
||
Guangshuo Li
|
c8547c7498 |
usb: gadget: net2280: Fix double free in probe error path
usb_initialize_gadget() installs gadget_release() as the release
callback for the embedded gadget device. The struct net2280 instance is
therefore released through gadget_release() when the gadget device's last
reference is dropped.
The probe error path calls net2280_remove(), which tears down the
partially initialized device and drops the gadget reference with
usb_put_gadget(). Calling kfree(dev) afterwards can free the same object
again.
Drop the explicit kfree() and let the gadget device release callback
handle the final free. This issue was found by a static analysis tool
I am developing.
Fixes:
|
||
|
Guangshuo Li
|
4f88d65def |
usb: gadget: f_hid: fix device reference leak in hidg_alloc()
hidg_alloc() initializes hidg->dev with device_initialize() before
calling dev_set_name(). If dev_set_name() fails, the function currently
jumps to err_unlock and returns without calling put_device().
This leaves the device reference unbalanced and prevents hidg_release()
from being called. Calling put_device() here is also safe, since
hidg_release() only frees resources owned by hidg.
The issue was identified by a static analysis tool I developed and
confirmed by manual review.
Route the dev_set_name() failure path through err_put_device so the
device reference is dropped properly.
Fixes:
|
||
Wentao Liang
|
e194ce048f |
usb: musb: omap2430: Fix use-after-free in omap2430_probe()
In omap2430_probe(), of_node_put(np) is called prematurely before the
last access to np, leading to a use-after-free if the node's reference
count drops to zero. Move the of_node_put() calls after the last use of
np in both the success and error paths.
Fixes:
|
||
Myrrh Periwinkle
|
d98d413ca6 |
usb: typec: ucsi: Don't update power_supply on power role change if not connected
We only need to update the power_supply on power role change if the port
is connected, because otherwise the online status should be the same for
both cases.
Cc: stable <stable@kernel.org>
Fixes:
|
||
|
Myrrh Periwinkle
|
b80e7d34c7 |
usb: typec: ucsi: Check if power role change actually happened before handling
The CrOS EC may send a connector status change event with the power
direction changed flag set even if the power direction hasn't actually
changed after initiating a SET_PDR command internally [1]. In practice
this happens on every system suspend due to other changes performed by
the EC [2][3][4], causing suspend to fail.
Fix this by checking if the power role change actually happened before
handling it.
[1]: https://source.chromium.org/chromiumos/chromiumos/codesearch/+/main:src/platform/ec/zephyr/subsys/pd_controller/pdc_power_mgmt.c;l=1689;drc=2d5a1cffce4e5ac8a39442cb3b764d2d5e1cf794
[2]: https://source.chromium.org/chromiumos/chromiumos/codesearch/+/main:src/platform/ec/zephyr/subsys/pd_controller/pdc_power_mgmt.c;l=3923;drc=2d5a1cffce4e5ac8a39442cb3b764d2d5e1cf794
[3]: https://source.chromium.org/chromiumos/chromiumos/codesearch/+/main:src/platform/ec/zephyr/subsys/pd_controller/pdc_power_mgmt.c;l=5094;drc=2d5a1cffce4e5ac8a39442cb3b764d2d5e1cf794
[4]: https://source.chromium.org/chromiumos/chromiumos/codesearch/+/main:src/platform/ec/zephyr/subsys/pd_controller/pdc_power_mgmt.c;l=2229;drc=2d5a1cffce4e5ac8a39442cb3b764d2d5e1cf794
Cc: stable <stable@kernel.org>
Fixes:
|
||
Sebastian Reichel
|
c06e6cd488 |
usb: typec: tcpm: improve handling of DISCOVER_MODES failures
UGREEN USB-C Multifunction Adapter Model CM512 (AKA "Revodok 107")
exposes two SVIDs: 0xff01 (DP Alt Mode) and 0x1d5c. The DISCOVER_MODES
step succeeds for 0xff01 and gets a NAK for 0x1d5c. Currently this
results in DP Alt Mode not being registered either, since the modes
are only registered once all of them have been discovered. The NAK
results in the processing being stopped and thus no Alt modes being
registered.
Improve the situation by handling the NAK gracefully and continue
processing the other modes.
Before this change, the TCPM log ends like this:
(more log entries before this)
[ 5.028287] AMS DISCOVER_SVIDS finished
[ 5.028291] cc:=4
[ 5.040040] SVID 1: 0xff01
[ 5.040054] SVID 2: 0x1d5c
[ 5.040082] AMS DISCOVER_MODES start
[ 5.040096] PD TX, header: 0x1b6f
[ 5.050946] PD TX complete, status: 0
[ 5.059609] PD RX, header: 0x264f [1]
[ 5.059626] Rx VDM cmd 0xff018043 type 1 cmd 3 len 2
[ 5.059640] AMS DISCOVER_MODES finished
[ 5.059644] cc:=4
[ 5.069994] Alternate mode 0: SVID 0xff01, VDO 1: 0x000c0045
[ 5.070029] AMS DISCOVER_MODES start
[ 5.070043] PD TX, header: 0x1d6f
[ 5.081139] PD TX complete, status: 0
[ 5.087498] PD RX, header: 0x184f [1]
[ 5.087515] Rx VDM cmd 0x1d5c8083 type 2 cmd 3 len 1
[ 5.087529] AMS DISCOVER_MODES finished
[ 5.087534] cc:=4
(no further log entries after this point)
After this patch the TCPM log looks exactly the same, but then
continues like this:
[ 5.100222] Skip SVID 0x1d5c (failed to discover mode)
[ 5.101699] AMS DFP_TO_UFP_ENTER_MODE start
(log goes on as the system initializes DP AltMode)
Cc: stable <stable@kernel.org>
Fixes:
|
||
Yongchao Wu
|
c8778ff817 |
usb: cdns3: gadget: fix request skipping after clearing halt
According to the cdns3 datasheet, the EPRST (Endpoint Reset) command causes the DMA engine to reposition its internal pointer to the next Transfer Descriptor (TD) if it was already processing one. This issue is consistently observed during the ADB identification process on macOS hosts, where the host issues a Clear_Halt. Although commit |
||
Peter Chen
|
ae6f3b8232 |
usb: cdns3: plat: fix unbalanced pm_runtime_forbid() call permanently leaks the runtime PM usage counter across bind/unbind cycles
Call pm_runtime_allow(dev) conditionally at cdns3_plat_remove.
Fixes:
|
||
|
Peter Chen
|
e6970cda63 |
usb: cdns3: plat: fix leaked usb2_phy initialization on usb3_phy acquisition failure
Move usb2_phy initialization after usb3_phy acquisition.
Fixes:
|
||
Felix Gu
|
ca927fc45e |
usb: typec: fusb302: Fix resource leak when devm_drm_dp_hpd_bridge_add() fails
If devm_drm_dp_hpd_bridge_add() fails during fusb302_probe(), the original
code returned directly without cleaning up the resources.
Move bridge registration before the IRQ is requested and route bridge
registration failures through the existing TCPM unregister and fwnode
cleanup path.
Fixes:
|
||
Radhey Shyam Pandey
|
c1a0ecbf32 |
usb: dwc3: xilinx: fix error handling in zynqmp init error paths
Fix error handling and resource cleanup i.e remove invalid
phy_exit() after failed phy_init(), route failures through
proper cleanup paths and return 0 explicitly on success.
Fixes:
|
||
Wanquan Zhong
|
689f2facc6 |
USB: serial: option: add missing RSVD(5) flag for Rolling RW135R-GL
The RW135R-GL entry added in commit |
||
Jan Volckaert
|
7d2b37d3e4 |
USB: serial: option: add MeiG SRM813Q
Add support for the Qualcomm Technology Snapdragon X35-based MeiG SRM813Q module. The module can be put in different modes via AT commands to enable/disable GPS functionality: MODEM - PPP mode(2dee:4d63): AT+SER=1,1 If#= 0: RMNET If#= 1: DIAG/ADB If#= 2: MODEM If#= 3: AT P: Vendor=2dee ProdID=4d63 Rev=05.15 S: Manufacturer=MEIG S: Product=LTE-A Module S: SerialNumber=1bd51f0e C: #Ifs= 4 Cfg#= 1 Atr=80 MxPwr=500mA I: If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=50 Driver=qmi_wwan E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=82(I) Atr=03(Int.) MxPS= 8 Ivl=32ms I: If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=85(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=87(I) Atr=03(Int.) MxPS= 10 Ivl=32ms NMEA mode(2dee:4d64): AT+SER=51,1 If#= 0: RMNET If#= 1: DIAG/ADB If#= 2: NMEA If#= 3: AT P: Vendor=2dee ProdID=4d64 Rev=05.15 S: Manufacturer=MEIG S: Product=LTE-A Module S: SerialNumber=1bd51f0e C: #Ifs= 4 Cfg#= 1 Atr=80 MxPwr=500mA I: If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=50 Driver=qmi_wwan E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=82(I) Atr=03(Int.) MxPS= 8 Ivl=32ms I: If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=60 Driver=option E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=85(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=87(I) Atr=03(Int.) MxPS= 10 Ivl=32ms Signed-off-by: Jan Volckaert <janvolck@gmail.com> Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold <johan@kernel.org> |
||
|
Johan Hovold
|
245aba83e3 |
USB: serial: mct_u232: fix missing interrupt-in transfer sanity check
Add the missing sanity check on the size of interrupt-in transfers to
avoid parsing stale or uninitialised slab data (and leaking it to user
space).
Fixes:
|
||
|
Johan Hovold
|
915b36d701 |
USB: serial: mct_u232: fix memory corruption with small endpoint
The driver overrides the maximum transfer size for a specific device
which only accepts 16 byte packets for its 32 byte bulk-out endpoint.
Make sure to never increase the maximum transfer size to prevent slab
corruption should a malicious device report a smaller endpoint max
packet size than expected.
Fixes:
|
||
|
Johan Hovold
|
ab8336a7e4 |
USB: serial: keyspan: fix missing indat transfer sanity check
Add the missing sanity check on the size of usa49wg indat transfers to
avoid parsing stale or uninitialised slab data.
Fixes:
|
||
|
Johan Hovold
|
cb3560e8ea |
USB: serial: digi_acceleport: fix memory corruption with small endpoints
Add the missing bulk-out buffer size sanity checks to avoid
out-of-bounds memory accesses or slab corruption should a malicious
device report smaller buffers than expected.
Fixes:
|
||
|
Zhang Cen
|
4ce058df2e |
USB: serial: belkin_sa: validate interrupt status length
The Belkin interrupt callback treats interrupt data as a four-byte
status report and reads LSR/MSR fields at offsets 2 and 3. The
interrupt-in buffer length is derived from endpoint wMaxPacketSize, and
short interrupt transfers may complete successfully with a smaller
actual_length.
Check the completed interrupt packet length before parsing status
fields so short interrupt endpoints and short successful packets are
ignored instead of causing out-of-bounds or stale status-byte reads.
KASAN report as below:
BUG: KASAN: slab-out-of-bounds in belkin_sa_read_int_callback()
Read of size 1
Call trace:
belkin_sa_read_int_callback() (drivers/usb/serial/belkin_sa.c:202)
__usb_hcd_giveback_urb() (drivers/usb/core/hcd.c:1630)
dummy_timer() (?:?)
Fixes:
|
||
|
Greg Kroah-Hartman
|
288a81a850 |
usb: typec: ucsi: validate connector number in ucsi_connector_change()
The connector number in a UCSI CCI notification is a 7-bit field supplied by the PPM. ucsi_connector_change() uses it to index the ucsi->connector[] array without checking it against the number of connectors the PPM reported at init time, so a buggy or malicious PPM (EC firmware, or an I2C-attached UCSI controller on the ccg / stm32g0 / glink transports) can drive schedule_work() on memory past the end of the array. Reject connector numbers that are zero or exceed cap.num_connectors before dereferencing the array. Assisted-by: gkh_clanker_t1000 Cc: Heikki Krogerus <heikki.krogerus@linux.intel.com> Cc: Benson Leung <bleung@chromium.org> Cc: Jameson Thies <jthies@google.com> Cc: Nathan Rebello <nathan.c.rebello@gmail.com> Cc: Johan Hovold <johan@kernel.org> Cc: Pooja Katiyar <pooja.katiyar@intel.com> Cc: Hsin-Te Yuan <yuanhsinte@chromium.org> Cc: Abel Vesa <abelvesa@kernel.org> Cc: stable <stable@kernel.org> Reviewed-by: Abel Vesa <abel.vesa@oss.qualcomm.com> Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Reviewed-by: Benson Leung <bleung@chromium.org> Link: https://patch.msgid.link/2026051351-truck-steadfast-df48@gregkh Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
||
|
Greg Kroah-Hartman
|
167dd8d122 |
usb: typec: ucsi: displayport: NAK DP_CMD_CONFIGURE without a payload VDO
ucsi_displayport_vdm() handles a DP_CMD_CONFIGURE by copying the first payload VDO from data[], but unlike the equivalent handler in altmodes/displayport.c it does not check that count covers a VDO beyond the header. A header-only Configure VDM (count == 1) would read one u32 past the caller's array. In the normal UCSI path the caller controls count, so this is hardening for non-standard delivery paths. NAK and bail when no configuration VDO is present, matching the generic DP altmode driver's existing guard. Assisted-by: gkh_clanker_t1000 Cc: Pooja Katiyar <pooja.katiyar@intel.com> Cc: Johan Hovold <johan@kernel.org> Cc: stable <stable@kernel.org> Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Link: https://patch.msgid.link/2026051351-vividly-flattered-eb3d@gregkh Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
||
|
Greg Kroah-Hartman
|
3389c149c6 |
usb: typec: tcpm: bound altmode_desc[] per iteration in svdm_consume_modes()
svdm_consume_modes() checks pmdata->altmodes against the array size once before the loop over the count, but forgot to check the bound at every point in the loop. In the well-behaved SVDM discovery flow this is harmless because each of at most SVID_DISCOVERY_MAX SVIDs contributes at most MODE_DISCOVERY_MAX modes, exactly filling altmode_desc[ALTMODE_DISCOVERY_MAX]. But the CMDT_RSP_ACK handler in tcpm_pd_svdm() does not correlate an incoming ACK with any request the port actually sent. Once port->partner is set, an unsolicited Discover Modes ACK is consumed unconditionally. A broken or malicious port partner can therefore drive altmodes to ALTMODE_DISCOVERY_MAX - 1 via the normal flow, and then send one extra Discover Modes ACK with seven VDOs. Because the pre-loop check passes, the loop could then writes up to five entries past altmode_desc[]. For mode_data_prime the next field in struct tcpm_port is the partner_altmode[] pointer array, which then receives partner-chosen SVID/VDO bytes. Move the bound check inside the loop so the array can never be indexed past ALTMODE_DISCOVERY_MAX regardless of how many VDOs the partner supplies or how the function was reached. Assisted-by: gkh_clanker_t1000 Cc: Badhri Jagan Sridharan <badhri@google.com> Cc: Heikki Krogerus <heikki.krogerus@linux.intel.com> Cc: stable <stable@kernel.org> Link: https://patch.msgid.link/2026051351-reshuffle-skillful-90af@gregkh Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
||
|
Greg Kroah-Hartman
|
8fbc349e83 |
usb: typec: tcpm: validate VDO count in Discover Identity ACK handlers
Properly validate the count passed from a device when calling svdm_consume_identity() or svdm_consume_identity_sop_prime() as the device-controlled value could index off of the static arrays, which could leak data. Assisted-by: gkh_clanker_t1000 Cc: Heikki Krogerus <heikki.krogerus@linux.intel.com> Cc: stable <stable@kernel.org> Reviewed-by: Badhri Jagan Sridharan <badhri@google.com> Link: https://patch.msgid.link/2026051350-plated-salute-0efe@gregkh Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
||
|
Greg Kroah-Hartman
|
aa2f716327 |
usb: typec: tcpm/tcpci_maxim: validate header NDO against RX_BYTE_CNT
A broken/malicious port can transmit a CRC-valid frame whose header advertises up to seven data objects but whose body carries fewer than that. Check for this, and rightfully reject the message, instead of reading from uninitialized stack memory. Assisted-by: gkh_clanker_t1000 Cc: Heikki Krogerus <heikki.krogerus@linux.intel.com> Cc: "André Draszik" <andre.draszik@linaro.org> Cc: Badhri Jagan Sridharan <badhri@google.com> Cc: Amit Sunil Dhamne <amitsd@google.com> Cc: stable <stable@kernel.org> Link: https://patch.msgid.link/2026051350-sitter-canopener-9045@gregkh Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |