Commit graph

222,025 commits

Author SHA1 Message Date
Jean Delvare
673424c089 pata_artop: Fix device ID parity check
x % 1 always evaluates to 0, which clearly isn't the intent. The
author probably had "% 2" or "& 1" in mind, and mispelled it.

Signed-off-by: Jean Delvare <jdelvare@suse.de>
Cc: Jeff Garzik <jgarzik@pobox.com>
Cc: Alan Cox <alan@linux.intel.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2010-09-09 14:19:18 -04:00
Fabian Godehardt
ab64511cbb AT91: SAM9G45 - add a separate clock entry for every single TC block
Without this patch you will not be able to register the first block
because of the second association call on at91_add_device_tc().

Signed-off-by: Fabian Godehardt <fg@emlix.com>
[nicolas.ferre@atmel.com: change tcb1_clk to fake child clock of tcb0_clk]
Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Acked-by: Andrew Victor <linux@maxim.org.za>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2010-09-09 20:14:43 +02:00
Chris Wilson
5ba2aaaaa1 drm/i915/debug: Include Ironlake in self-refresh status
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
2010-09-09 19:14:06 +01:00
Nicolas Ferre
5afddee415 AT91: clock: peripheral clocks can have other parent than mck
While registering clock allow to set parent clock other
than mck. It is useful for clocks than can be seen as
child clock of a peripheral.

Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Acked-by: Andrew Victor <linux@maxim.org.za>
2010-09-09 20:13:23 +02:00
Zachary Amsden
da908f2fb4 KVM: x86: Perform hardware_enable in CPU_STARTING callback
The CPU_STARTING callback was added upstream with the intention
of being used for KVM, specifically for the hardware enablement
that must be done before we can run in hardware virt.  It had
bugs on the x86_64 architecture at the time, where it was called
after CPU_ONLINE.  The arches have since merged and the bug is
gone.

It might be noted other features should probably start making
use of this callback; microcode updates in particular which
might be fixing important erratums would be best applied before
beginning to run user tasks.

Signed-off-by: Zachary Amsden <zamsden@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2010-09-09 13:48:16 -03:00
Jonathan Corbet
a73f8844e1 lglock: make lg_lock_global() actually lock globally
lg_lock_global() currently only acquires spinlocks for online CPUs, but
it's meant to lock all possible CPUs.  Lglock-protected resources may be
associated with removed CPUs - and, indeed, that could happen with the
per-superblock open files lists.

At Nick's suggestion, change for_each_online_cpu() to
for_each_possible_cpu() to protect accesses to those resources.

Cc: Al Viro <viro@ZenIV.linux.org.uk>
Acked-by: Nick Piggin <npiggin@kernel.dk>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-09-09 09:09:43 -07:00
Stefan Bader
39aa3cb3e8 mm: Move vma_stack_continue into mm.h
So it can be used by all that need to check for that.

Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-09-09 09:05:06 -07:00
Chris Wilson
df0e924883 drm/i915: Make the connector->encoder relationship explicit
Currently we have a exact mapping of a connector onto an encoder for its
whole lifetime. Make this an explicit property of the structure and so
simplify the code.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2010-09-09 17:00:43 +01:00
Chris Wilson
f875c15a4f drm/i915: Use the direct mapping of pipe->crtc
Why iterate all the crtcs to find the pipe, when we already know which
crtc is attached to which pipe?

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2010-09-09 17:00:36 +01:00
Tejun Heo
3c9a024fde percpu: fix build breakage on s390 and cleanup build configuration tests
Commit bbddff05 (percpu: use percpu allocator on UP too) incorrectly
excluded pcpu_build_alloc_info() on SMP configurations which use
generic setup_per_cpu_area() like s390.  The config ifdefs are
becoming confusing.  Fix and clean it up by,

* Move pcpu_build_alloc_info() right on top of its two users -
  pcpu_{embed|page}_first_chunk() which are already in CONFIG_SMP
  block.

* Define BUILD_{EMBED|PAGE}_FIRST_CHUNK which indicate whether each
  first chunk function needs to be included and use them to control
  inclusion of the three functions to reduce confusion.

Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-by: Sachin Sant <sachinp@in.ibm.com>
2010-09-09 18:00:15 +02:00
Chris Wilson
4ef69c7a64 drm/i915: Rename intel_encoder->enc to base for consistency
[Patch is slightly larger than is strictly necessary to fixup
surrounding checkpatch.pl errors.]

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2010-09-09 17:00:13 +01:00
Linus Torvalds
26a94e81de Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband:
  RDMA/nes: Fix hang with modified FIN handling on A0 cards
  RDMA/nes: Change state to closing after FIN
  RDMA/nes: Fix double CLOSE event indication crash
  RDMA/nes: Write correct register write to set TX pause param
  RDMA/cxgb3: Don't exceed the max HW CQ depth
2010-09-09 08:58:52 -07:00
Linus Torvalds
cad46744a3 Merge branch 'fixes' of git://oss.oracle.com/git/tma/linux-2.6
* 'fixes' of git://oss.oracle.com/git/tma/linux-2.6:
  ocfs2: Fix orphan add in ocfs2_create_inode_in_orphan
  ocfs2: split out ocfs2_prepare_orphan_dir() into locking and prep functions
  ocfs2: allow return of new inode block location before allocation of the inode
  ocfs2: use ocfs2_alloc_dinode_update_counts() instead of open coding
  ocfs2: split out inode alloc code from ocfs2_mknod_locked
  Ocfs2: Fix a regression bug from mainline commit(6b933c8e6f1a2f3118082c455eef25f9b1ac7b45).
  ocfs2: Fix deadlock when allocating page
  ocfs2: properly set and use inode group alloc hint
  ocfs2: Use the right group in nfs sync check.
  ocfs2: Flush drive's caches on fdatasync
  ocfs2: make __ocfs2_page_mkwrite handle file end properly.
  ocfs2: Fix incorrect checksum validation error
  ocfs2: Fix metaecc error messages
2010-09-09 08:57:02 -07:00
James Bottomley
3a5c19c23d [SCSI] fix use-after-free in scsi_init_io()
we're using a pointer through a freed command to reset the request,
which has shown up as an oops with slab poisoning:

Reported-by: Tejun Heo <tj@kernel.org>
Reported-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-09-09 09:58:18 -05:00
Takashi Iwai
10a20af7c9 ALSA: hda - Improve the input source name labels
This patch improves the input-source label strings to be generated from
the pin information instead of fixed strings per AUTO_PIN_* type.
This gives more suitable labels, especially for mic and line-in pins.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2010-09-09 16:46:03 +02:00
Takashi Iwai
86e2959a10 ALSA: hda - Remove AUTO_PIN_FRONT_{MIC|LINE}
We can assign multiple pins to a single role now, let's reduce the
redundant FRONT_MIC and FRONT_LINE.  Also, autocfg->input_pins[] is
no longer used, so this is removed as well.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2010-09-09 16:46:01 +02:00
Takashi Iwai
b5786e85cb ALSA: hda - Keep char arrays in input_mux items
Keep char array in the input_mux item itself instead of pointing to
an external string.  This is a preliminary work for improving the
input-mux name based on the pin role.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2010-09-09 16:45:58 +02:00
Shaohua Li
d530148ae8 dquot: do full inode dirty in allocating space
Alex Shi found a regression when doing ffsb test. The test has several threads,
and each thread creates a small file, write to it and then delete it. ffsb
reports about 20% regression and Alex bisected it to 43d2932d88. The test
will call __mark_inode_dirty 3 times. without this commit, we only take
inode_lock one time, while with it, we take the lock 3 times with flags (
I_DIRTY_SYNC,I_DIRTY_PAGES,I_DIRTY). Perf shows the lock contention increased
too much. Below proposed patch fixes it.

fs is allocating blocks, which usually means file writes and the inode
will be dirtied soon. We fully dirty the inode to reduce some inode_lock
contention in several calls of __mark_inode_dirty.

Jan Kara: Added comment.

Signed-off-by: Shaohua Li <shaohua.li@intel.com>
Signed-off-by: Alex Shi <alex.shi@intel.com>
Signed-off-by: Jan Kara <jack@suse.cz>
2010-09-09 16:08:51 +02:00
Clemens Ladisch
51485e8e24 ALSA: virtuoso: update Kconfig text
Update the Xonar config texts with the latest information about the
Xonar DS, HDAV1.3 Slim, and Xense.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2010-09-09 10:53:43 +02:00
Clemens Ladisch
99f08bf590 ALSA: oxygen: fix CONFIG_SND_OXYGEN_LIB dependency selection
As the select directive does not handle indirect dependencies, select
those explicitly in the driver sections.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2010-09-09 10:53:40 +02:00
Clemens Ladisch
2dbf0ea29c ALSA: virtuoso: Xonar DS: add stereo upmixing to center/LFE channels
Add the possibility to route a mix of the two channels of stereo data to
the center and LFE outputs.  Due to a WM8766 restriction, all surround
and back channels also get the mixed L/R signal in this case.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2010-09-09 10:53:37 +02:00
Clemens Ladisch
84cf83a28d ALSA: virtuoso: automatically handle Xonar DS headphone routing
Automatically mute the speaker outputs as long as a headphone is plugged.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2010-09-09 10:53:33 +02:00
Clemens Ladisch
435feac648 ALSA: virtuoso: add Xonar DS headphone jack detection
Now that the polarity of the headphone detection pin is known, replace
the debugging message with a proper jack plug input device.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2010-09-09 10:53:30 +02:00
Clemens Ladisch
9bac84edf0 ALSA: virtuoso: fix Xonar DS input switches
Use the correct number, register bits, and names for the input switches.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2010-09-09 10:53:27 +02:00
Clemens Ladisch
da0dab5ecb ALSA: virtuoso: fix WM8766 register writes with MSB
The check for the volume update latch bit was accidentally in the wrong
function, where it would prevent the MSB from being written, instead of
correctly ignoring it for cached values.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2010-09-09 10:53:23 +02:00
Takashi Iwai
c8bdfacb63 Merge branch 'fix/misc' into topic/misc 2010-09-09 10:51:45 +02:00
Chris Wilson
7839d956fc drm/i915: Double check that the wait_request is not pending before warning
If we are busy, then we may have woken up the wait_request handler but
not yet serviced it before the hang check fires. So in hang check,
double check that the i915_gem_do_wait_request() is still pending the
wake-up before declaring all hope lost.

Fixes regression with e78d73b16b.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=30073
Reported-and-tested-by: Sitsofe Wheeler <sitsofe@yahoo.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
2010-09-09 09:18:00 +01:00
Cliff Wickman
37a2f9f30a x86, kdump: Change copy_oldmem_page() to use cached addressing
The copy of /proc/vmcore to a user buffer proceeds much faster
if the kernel addresses memory as cached.

With this patch we have seen an increase in transfer rate from
less than 15MB/s to 80-460MB/s, depending on size of the
transfer. This makes a big difference in time needed to save a
system dump.

Signed-off-by: Cliff Wickman <cpw@sgi.com>
Acked-by: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: kexec@lists.infradead.org
Cc: <stable@kernel.org> # as far back as it would apply
LKML-Reference: <E1OtMLz-0001yp-Ia@eag09.americas.sgi.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-09-09 09:46:23 +02:00
David Henningsson
6cb3b707f9 ALSA: HDA: Add fixup pins for Ideapad Y550
By adding the subwoofer as a speaker pin, it is treated correctly when auto-muting.

BugLink: https://launchpad.net/bugs/611803
Signed-off-by: David Henningsson <david.henningsson@canonical.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2010-09-09 09:10:01 +02:00
Dan Carpenter
a7a13d0676 ALSA: rawmidi: fix the get next midi device ioctl
If we pass in a device which is higher than SNDRV_RAWMIDI_DEVICES then
the "next device" should be -1.  This function just returns device + 1.

But the main thing is that "device + 1" can lead to a (harmless) integer
overflow and that annoys static analysis tools.

[fix the case for device == SNDRV_RAWMIDI_DEVICE by tiwai]

Signed-off-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2010-09-09 09:05:21 +02:00
David S. Miller
e199e6136c Merge branch 'master' of master.kernel.org:/pub/scm/linux/kernel/git/torvalds/linux-2.6 2010-09-08 23:49:04 -07:00
Greg Kroah-Hartman
6b5e073663 Staging: fix Makefile so broadcom driver will actually build.
It would be nice if people tested their patches before sending
them to me...

Cc: Henry Ptasinski <henryp@broadcom.com>
Cc: Brett Rudley <brudley@broadcom.com>
Cc: Nohee Ko <noheek@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-09-08 23:14:18 -07:00
Henry Ptasinski
a9533e7ea3 Staging: Add initial release of brcm80211 - Broadcom 802.11n wireless LAN driver.
Signed-off-by: Henry Ptasinski <henryp@broadcom.com>
Cc: Brett Rudley <brudley@broadcom.com>
Cc: Nohee Ko <noheek@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-09-08 23:09:11 -07:00
Linus Walleij
25c8e03bdb spi/pl022: move probe call to subsys_initcall()
The PL022 SPI bus is sometimes used for early stuff like
regulators that need to be present at module_init() time, so
we move this to a subsys_initcall().

Signed-off-by: Linus Walleij <linus.walleij@stericsson.com>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2010-09-08 22:50:10 -06:00
Eric Dumazet
972c40b5be KS8851: Correct RX packet allocation
Use netdev_alloc_skb_ip_align() helper and do correct allocation

Tested-by: Abraham Arce <x0066660@ti.com>
Signed-off-by: Abraham Arce <x0066660@ti.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-08 21:47:13 -07:00
Eric Dumazet
719f835853 udp: add rehash on connect()
commit 30fff923 introduced in linux-2.6.33 (udp: bind() optimisation)
added a secondary hash on UDP, hashed on (local addr, local port).

Problem is that following sequence :

fd = socket(...)
connect(fd, &remote, ...)

not only selects remote end point (address and port), but also sets
local address, while UDP stack stored in secondary hash table the socket
while its local address was INADDR_ANY (or ipv6 equivalent)

Sequence is :
 - autobind() : choose a random local port, insert socket in hash tables
              [while local address is INADDR_ANY]
 - connect() : set remote address and port, change local address to IP
              given by a route lookup.

When an incoming UDP frame comes, if more than 10 sockets are found in
primary hash table, we switch to secondary table, and fail to find
socket because its local address changed.

One solution to this problem is to rehash datagram socket if needed.

We add a new rehash(struct socket *) method in "struct proto", and
implement this method for UDP v4 & v6, using a common helper.

This rehashing only takes care of secondary hash table, since primary
hash (based on local port only) is not changed.

Reported-by: Krzysztof Piotr Oledzki <ole@ans.pl>
Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Tested-by: Krzysztof Piotr Oledzki <ole@ans.pl>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-08 21:45:01 -07:00
Stephen Hemminger
f27e21a813 atlx: make strings const
Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Acked-by: Chris Snook <chris.snook@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-08 21:32:12 -07:00
Eric Dumazet
e0386005ff net: inet_add_protocol() can use cmpxchg()
Use cmpxchg() to get rid of spinlocks in inet_add_protocol() and
friends.

inet_protos[] & inet6_protos[] are moved to read_mostly section

Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-08 21:31:35 -07:00
Nikitas Angelinas
baa5251e8c Staging: vt6656: use ARRAY_SIZE macro in channel.c
Replace (sizeof(ChannelRuleTab) / sizeof(ChannelRuleTab[0])) with
ARRAY_SIZE(ChannelRuleTab) in drivers/staging/vt6656/channel.c

Signed-off-by: Nikitas Angelinas <nikitasangelinas@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-09-08 21:31:25 -07:00
Maurice Dawson
842ec6ba3b Staging: comedi: fix space coding style issue in adl_pci9111.c
This is a patch to the adl_pci9111.c file that fixes up multiple please,
no space for starting a line warnings, found by the checkpatch.pl tool

Signed-off-by: Maurice Dawson <mauricedawson2699@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-09-08 21:31:24 -07:00
Ondrej Zary
92e32eaee2 cxacru: ignore cx82310_eth devices
Ignore ADSL routers, which can have the same vendor and product IDs
as ADSL modems but should be handled by the cx82310_eth driver.

This intentionally ignores device IDs that aren't currently handled
by cx82310_eth. There may be other device IDs that perhaps shouldn't
be claimed by cxacru.

Signed-off-by: Ondrej Zary <linux@rainbow-software.org>
Signed-off-by: Simon Arlott <simon@fire.lp0.eu>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-08 21:29:20 -07:00
Vipin Mehta
fbc69d379c staging: ath6kl: Eliminating the symlink to 2.0 header files
Moving the AR6002 hw 2.0 specific register definitions files from
the hw.0 directory to a new directory, 'hw' within hw2.0.

Signed-off-by: Vipin Mehta <vmehta@atheros.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-09-08 21:26:41 -07:00
Mike McCormack
533d1ffe41 Staging: rtl8192e: Less verbose function headers
Signed-off-by: Mike McCormack <mikem@ring3k.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-09-08 21:21:26 -07:00
Mike McCormack
7f440f49d1 Staging: rtl8192e: Fix indent in some places
Signed-off-by: Mike McCormack <mikem@ring3k.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-09-08 21:21:25 -07:00
Mike McCormack
1dc4dbbf7b Staging: rtl8192e: Remove some redundant comments
Signed-off-by: Mike McCormack <mikem@ring3k.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-09-08 21:21:25 -07:00
Mike McCormack
51ae5d558f Staging: rtl8192e: Remove extern and redundant declarations
Signed-off-by: Mike McCormack <mikem@ring3k.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-09-08 21:21:24 -07:00
Mike McCormack
196bd68726 Staging: rtl8192e: Remove function with no effect
Signed-off-by: Mike McCormack <mikem@ring3k.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-09-08 21:21:23 -07:00
Mike McCormack
b6d5e884ab Staging: rtl8192e: Remove unused macros
Signed-off-by: Mike McCormack <mikem@ring3k.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-09-08 21:21:22 -07:00
Mike McCormack
f347140583 Staging: rtl8192e: Remove some commented out code
Signed-off-by: Mike McCormack <mikem@ring3k.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-09-08 21:21:22 -07:00
Mike McCormack
d5abdf72be Staging: rtl8192e: Remove function name comments at end of functions
Signed-off-by: Mike McCormack <mikem@ring3k.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-09-08 21:21:21 -07:00