Commit graph

222,025 commits

Author SHA1 Message Date
Stefano Stabellini
ca65f9fc0c Introduce CONFIG_XEN_PVHVM compile option
This patch introduce a CONFIG_XEN_PVHVM compile time option to
enable/disable Xen PV on HVM support.

Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
2010-07-29 11:11:33 -07:00
Arnaldo Carvalho de Melo
6e406257b3 perf symbols: Precisely specify if dso->{long,short}_name should be freed
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2010-07-29 15:11:30 -03:00
Stefano Stabellini
b98a409b80 blkfront: do not create a PV cdrom device if xen_hvm_guest
It is not possible to unplug emulated cdrom devices, and PV cdroms don't
handle media insert, eject and stream, so we are better off disabling PV
cdroms when running as a Xen HVM guest.

Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
2010-07-29 11:11:08 -07:00
Wim Van Sebroeck
230a5cef48 watchdog: update MAINTAINERS entry
Add Mailing-list and website to watchdog MAINTAINERS entry.

Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2010-07-29 18:02:51 +00:00
Kuninori Morimoto
3bc280708e ASoC: fsi: Add new funtion for SPDIF
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-07-29 10:28:49 -07:00
Kuninori Morimoto
265c770d03 ASoC: fsi: remove device id check
Current FSI driver id is not only 0

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-07-29 10:28:37 -07:00
Kuninori Morimoto
bced8f5a36 ASoC: fsi: remove unnecessary clock processing
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-07-29 10:28:27 -07:00
Arnaldo Carvalho de Melo
39d17dacb3 perf record: Release resources at exit
So that we can reduce the noise on valgrind when looking for memory
leaks.

Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2010-07-29 14:08:55 -03:00
Christian Lamparter
b7753c8cd5 cfg80211: fix dev <-> wiphy typo
Cc: Joe Perches <joe@perches.com>
Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-07-29 12:55:00 -04:00
Johannes Berg
e5b900d228 mac80211: allow drivers to request DTIM period
Some features require knowing the DTIM period
before associating. This implements the ability
to wait for a beacon in mac80211 before assoc
to provide this value. It is optional since
most likely not all drivers will need this.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-07-29 12:55:00 -04:00
Stanislaw Gruszka
d28232b461 iwlwifi: fix scan abort
Fix possible double priv->mutex lock introduced by commit
a69b03e941
"iwlwifi: cancel scan watchdog in iwl_bg_abort_scan" .
We can not call cancel_delayed_work_sync(&priv->scan_check) with
priv->mutex locked because workqueue function iwl_bg_scan_check()
take that lock internally.

We do not need to synchronize when canceling priv->scan_check work.
We can avoid races (sending double abort command or send no
command at all) using STATUS_SCAN_ABORT bit. Moreover
current iwl_bg_scan_check() code seems to be broken, as
we should not send abort commands when currently aborting.

Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
CC: stable@kernel.org
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-07-29 12:55:00 -04:00
Lennert Buytenhek
16345910d9 mwl8k: change maintenance status
The 8366 AP support in particular is still rather incomplete, but
this is unlikely to be addressed any time soon.

Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-07-29 12:55:00 -04:00
John W. Linville
ac01e948b1 wl1271: update hw/fw version info in wiphy struct
This makes the information available through ethtool...

Signed-off-by: John W. Linville <linville@tuxdriver.com>
Acked-by: Juuso Oikarinen <juuso.oikarinen@nokia.com>
2010-07-29 12:46:51 -04:00
John W. Linville
8b28e82224 wl1251: update hw/fw version info in wiphy struct
This makes the information available through ethtool...

Signed-off-by: John W. Linville <linville@tuxdriver.com>
Acked-by: Kalle Valo <kvalo@adurom.com>
2010-07-29 12:46:50 -04:00
John W. Linville
ece550d0e4 wl1271: add get_survey callback in order to get channel noise
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Acked-by: Juuso Oikarinen <juuso.oikarinen@nokia.com>
2010-07-29 12:46:49 -04:00
John W. Linville
bef9cb589d libertas_tf: add get_survey callback in order to get channel noise
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-07-29 12:46:48 -04:00
John W. Linville
19434148d1 wl1251: add get_survey callback in order to get channel noise
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Acked-by: Kalle Valo <kvalo@adurom.com>
2010-07-29 12:46:47 -04:00
John W. Linville
a55427e828 ar9170: add get_survey callback in order to get channel noise
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Acked-by: Christian Lamparter <chunkeey@googlemail.com>
2010-07-29 12:46:47 -04:00
John W. Linville
0d462bbb0e mwl8k: add get_survey callback in order to get channel noise
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Acked-by: Lennert Buytenhek <buytenh@wantstofly.org>
2010-07-29 12:46:45 -04:00
John W. Linville
4c85ab11ca ath9k: enable serialize_regmode for non-PCIE AR9160
https://bugzilla.kernel.org/show_bug.cgi?id=16476

Signed-off-by: John W. Linville <linville@tuxdriver.com>
Acked-by: Luis R. Rodriguez <lrodriguez@atheros.com>
Cc: stable@kernel.org
2010-07-29 12:46:45 -04:00
Ulf Magnusson
ac1ffde1ba kconfig: fix MODULES-related bug in case of no .config
There seems to be a kconfig bug due to MODULES not always being
evaluated if no .config is found. Take the following Kconfig as an
example:

config MODULES
	def_bool y

config FOO
	def_tristate m

With no .config, the following configuration is generated:

CONFIG_MODULES=y
CONFIG_FOO=y

With an empty .config, the following:

CONFIG_MODULES=y
CONFIG_FOO=m

Tristate choice statements can also exhibit the problem, due to having an
implicit rev_dep (select) containing "m".

The problem is that MODULES is never evaluted in conf_read_simple() unless
there's a .config. The following patch fixes this.

Signed-off-by: Ulf Magnusson <ulfalizer.lkml@gmail.com>
Reviewed-by: WANG Cong <xiyou.wangcong@gmail.com>
Signed-off-by: Michal Marek <mmarek@suse.cz>
2010-07-29 16:56:02 +02:00
Russell King
d50f58bbd9 Merge branch 'for-rmk' of git://git.pengutronix.de/git/imx/linux-2.6 into devel-stable 2010-07-29 15:48:37 +01:00
Russell King
129961ecaf Merge branch 'wells/lpc32xx-arch_v2' of git://git.lpclinux.com/linux-2.6-lpc into devel-stable 2010-07-29 15:48:02 +01:00
Rabin Vincent
08458ef6ee ARM: 6246/1: mmci: support larger MMCIDATALENGTH register
The Ux500 variant has a 24-bit MMCIDATALENGTH register, as opposed to
the 16-bit one on the ARM version.

Acked-by: Linus Walleij <linus.walleij@stericsson.com>
Signed-off-by: Rabin Vincent <rabin.vincent@stericsson.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-07-29 15:40:56 +01:00
Rabin Vincent
4380c14fd7 ARM: 6245/1: mmci: enable hardware flow control on Ux500 variants
Although both the U300 and Ux500 use ST variants, the HWFCEN bits are at
different positions, so use the variant_data to store the information.

Acked-by: Linus Walleij <linus.walleij@stericsson.com>
Signed-off-by: Rabin Vincent <rabin.vincent@stericsson.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-07-29 15:40:32 +01:00
Rabin Vincent
4956e10903 ARM: 6244/1: mmci: add variant data and default MCICLOCK support
Add a variant_data structure to handle the differences between the
various variants of this peripheral.  Add a first quirk for a default
MCICLOCK value, required on the Ux500 variant where the enable bit needs
to be always set, since it controls access to some registers.

Acked-by: Linus Walleij <linus.walleij@stericsson.com>
Signed-off-by: Rabin Vincent <rabin.vincent@stericsson.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-07-29 15:39:56 +01:00
Rabin Vincent
bb8f563c84 ARM: 6243/1: mmci: pass power_mode to the translate_vdd callback
Platforms may have some external power control which need to be
controlled from board specific code.  Rename the translate_vdd()
callback to vdd_handler() and pass it the power mode.

Acked-by: Linus Walleij <linus.walleij@stericsson.com>
Signed-off-by: Rabin Vincent <rabin.vincent@stericsson.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-07-29 15:39:05 +01:00
Steven Whitehouse
7cdee5dbf4 Revert "GFS2: recovery stuck on transaction lock"
This reverts commit b7dc2df572.

The initial patch didn't quite work since it doesn't cover all
the possible routes by which the GLF_FROZEN flag might be set.
A revised fix is coming up in the next patch.

Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2010-07-29 14:39:29 +01:00
David Henningsson
150b432f44 ALSA: hda - Rename iMic to Int Mic on Lenovo NB0763
The non-standard name "iMic" makes PulseAudio ignore the microphone.
BugLink: https://launchpad.net/bugs/605101

Signed-off-by: David Henningsson <david.henningsson@canonical.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2010-07-29 15:37:28 +02:00
Takashi Iwai
b0485610d6 Merge branch 'fix/hda' into topic/hda 2010-07-29 15:32:34 +02:00
Takashi Iwai
dc1eae256c ALSA: hda - Add a PC-beep workaround for ASUS P5-V
ASUS P5-V provides a SSID that unexpectedly matches with the value
compilant with Realtek's specification.  Thus the driver interprets
it badly, resulting in non-working PC beep.

This patch adds a white-list for such a case; a white-list of known
devices with working PC beep.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2010-07-29 15:30:02 +02:00
Yasuaki Ishimatsu
3709c85735 x86: Ioremap: fix wrong physical address handling in PAT code
The following two commits fixed a problem that x86 ioremap() doesn't handle
physical address higher than 32-bit properly in X86_32 PAE mode.

 ffa71f33a8 (x86, ioremap: Fix incorrect
 physical address handling in PAE mode)

 35be1b716a (x86, ioremap: Fix normal
 ram range check)

But these fixes are not enough, since pat_pagerange_is_ram() in PAT code
also has a same problem. This patch fixes it.

Signed-off-by: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com>
Reviewed-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com>
LKML-Reference: <4C47DDCF.80300@jp.fujitsu.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2010-07-29 15:26:11 +02:00
Russell King
b92b361213 ARM: Add barriers to io{read,write}{8,16,32} accessors as well
The ioread/iowrite accessors also need barriers as they're used in
place of readl/writel et.al. in portable drivers.  Create __iormb()
and __iowmb() which are conditionally defined to be barriers dependent
on ARM_DMA_MEM_BUFFERABLE, and always use these macros in the accessors.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-07-29 14:04:37 +01:00
Catalin Marinas
79f64dbf68 ARM: 6273/1: Add barriers to the I/O accessors if ARM_DMA_MEM_BUFFERABLE
When the coherent DMA buffers are mapped as Normal Non-cacheable
(ARM_DMA_MEM_BUFFERABLE enabled), buffer accesses are no longer ordered
with Device memory accesses causing failures in device drivers that do
not use the mandatory memory barriers before starting a DMA transfer.
LKML discussions led to the conclusion that such barriers have to be
added to the I/O accessors:

http://thread.gmane.org/gmane.linux.kernel/683509/focus=686153
http://thread.gmane.org/gmane.linux.ide/46414
http://thread.gmane.org/gmane.linux.kernel.cross-arch/5250

This patch introduces a wmb() barrier to the write*() I/O accessors to
handle the situations where Normal Non-cacheable writes are still in the
processor (or L2 cache controller) write buffer before a DMA transfer
command is issued. For the read*() accessors, a rmb() is introduced
after the I/O to avoid speculative loads where the driver polls for a
DMA transfer ready bit.

Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-07-29 14:04:37 +01:00
Catalin Marinas
6775a558fe ARM: 6272/1: Convert L2x0 to use the IO relaxed operations
This patch is in preparation for a subsequent patch which adds barriers
to the I/O accessors. Since the mandatory barriers may do an L2 cache
sync, this patch avoids a recursive call into l2x0_cache_sync() via the
write*() accessors and wmb() and a call into l2x0_cache_sync() with the
l2x0_lock held.

Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-07-29 14:04:36 +01:00
Catalin Marinas
e936771a76 ARM: 6271/1: Introduce *_relaxed() I/O accessors
This patch introduces readl*_relaxed()/write*_relaxed() as the main I/O
accessors (when __mem_pci is defined). The standard read*()/write*()
macros are now based on the relaxed accessors.

This patch is in preparation for a subsequent patch which adds barriers
to the I/O accessors.

Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-07-29 14:04:36 +01:00
Rabin Vincent
661f10f6b6 ARM: 6275/1: ux500: don't use writeb() in uncompress.h
Don't use writeb() in uncompress.h, to avoid the following build errors
when the "Add barriers to the I/O accessors" series is applied.  Use
__raw_writeb() instead.

arch/arm/boot/compressed/misc.o: In function `putc':
arch/arm/mach-ux500/include/mach/uncompress.h:41:
undefined reference to `outer_cache'

Acked-by: Linus Walleij <linus.walleij@stericsson.com>
Signed-off-by: Rabin Vincent <rabin.vincent@stericsson.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-07-29 14:04:35 +01:00
wanzongshun
f4f5e28d2e ARM: 6274/1: add global control registers definition header file for nuc900
add global control registers definition header file for nuc900

Signed-off-by: Wan ZongShun <mcuos.com@gmail.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-07-29 14:03:49 +01:00
Kulikov Vasiliy
9c29490246 sound: oss: msnd: check request_region() return value
request_region() may fail, if so return -EBUSY.

Signed-off-by: Kulikov Vasiliy <segooon@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2010-07-29 13:48:57 +02:00
Kulikov Vasiliy
fa95a6471f ALSA: msnd: check request_region() return value
request_region() may fail, if so return -EBUSY.

Signed-off-by: Kulikov Vasiliy <segooon@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2010-07-29 13:48:39 +02:00
Ian Campbell
4877c73728 xen: Do not suspend IPI IRQs.
In general the semantics of IPIs are that they are are expected to
continue functioning after dpm_suspend_noirq().

Specifically I have seen a deadlock between the callfunc IPI and the
stop machine used by xen's do_suspend() routine. If one CPU has already
called dpm_suspend_noirq() then there is a window where it can be sent
a callfunc IPI before all the other CPUs have entered stop_cpu().

If this happens then the first CPU ends up spinning in stop_cpu()
waiting for the other to rendezvous in state STOPMACHINE_PREPARE while
the other is spinning in csd_lock_wait().

Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Cc: Jeremy Fitzhardinge <jeremy@goop.org>
Cc: xen-devel@lists.xensource.com
LKML-Reference: <1280398595-29708-4-git-send-email-ian.campbell@citrix.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2010-07-29 13:24:58 +02:00
Ian Campbell
ba461f094b powerpc: Use IRQF_NO_SUSPEND not IRQF_TIMER for non-timer interrupts
kw_i2c_irq and via_pmu_interrupt are not timer interrupts and
therefore should not use IRQF_TIMER. Use the recently introduced
IRQF_NO_SUSPEND instead since that is the actual desired behaviour.

Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Grant Likely <grant.likely@secretlab.ca>
Cc: linuxppc-dev@ozlabs.org
Cc: devicetree-discuss@lists.ozlabs.org
LKML-Reference: <1280398595-29708-3-git-send-email-ian.campbell@citrix.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2010-07-29 13:24:57 +02:00
Ian Campbell
2dd9320305 ixp4xx-beeper: Use IRQF_NO_SUSPEND not IRQF_TIMER for non-timer interrupt
ixp4xx_spkr_interrupt is not a timer interrupt and therefore should
not use IRQF_TIMER. Use the recently introduced IRQF_NO_SUSPEND
instead since that is the actual desired behaviour.

Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Cc: linux-input@vger.kernel.org
LKML-Reference: <1280398595-29708-2-git-send-email-ian.campbell@citrix.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2010-07-29 13:24:57 +02:00
Ian Campbell
685fd0b4ea irq: Add new IRQ flag IRQF_NO_SUSPEND
A small number of users of IRQF_TIMER are using it for the implied no
suspend behaviour on interrupts which are not timer interrupts.

Therefore add a new IRQF_NO_SUSPEND flag, rename IRQF_TIMER to
__IRQF_TIMER and redefine IRQF_TIMER in terms of these new flags.

Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Cc: Jeremy Fitzhardinge <jeremy@goop.org>
Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Grant Likely <grant.likely@secretlab.ca>
Cc: xen-devel@lists.xensource.com
Cc: linux-input@vger.kernel.org
Cc: linuxppc-dev@ozlabs.org
Cc: devicetree-discuss@lists.ozlabs.org
LKML-Reference: <1280398595-29708-1-git-send-email-ian.campbell@citrix.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2010-07-29 13:24:57 +02:00
Magnus Damm
f1b957d3a0 ARM: 6270/1: clean files in arch/arm/boot/compressed/
Update the compressed boot Makefile for ARM to
remove files during clean.

Signed-off-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-07-29 11:31:21 +01:00
Kulikov Vasiliy
ec9d04b2a8 ALSA: asihpi: check return value of get_user()
get_user() may fail, if so return -EFAULT.

Signed-off-by: Kulikov Vasiliy <segooon@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2010-07-29 12:26:28 +02:00
Kulikov Vasiliy
b3390ceab9 sound: oss: midi_synth: check get_user() return value
get_user() may fail, if so return -EFAULT.

Signed-off-by: Kulikov Vasiliy <segooon@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2010-07-29 12:25:06 +02:00
Kulikov Vasiliy
5157cc8113 ALSA: sb: check get_user() return value
get_user() may fail, if so return -EFAULT.

[Fixed one missing place by tiwai]

Signed-off-by: Kulikov Vasiliy <segooon@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2010-07-29 12:24:22 +02:00
Christoph Lameter
bc6488e910 slub numa: Fix rare allocation from unexpected node
The network developers have seen sporadic allocations resulting in objects
coming from unexpected NUMA nodes despite asking for objects from a
specific node.

This is due to get_partial() calling get_any_partial() if partial
slabs are exhausted for a node even if a node was specified and therefore
one would expect allocations only from the specified node.

get_any_partial() sporadically may return a slab from a foreign
node to gradually reduce the size of partial lists on remote nodes
and thereby reduce total memory use for a slab cache.

The behavior is controlled by the remote_defrag_ratio of each cache.

Strictly speaking this is permitted behavior since __GFP_THISNODE was
not specified for the allocation but it is certain surprising.

This patch makes sure that the remote defrag behavior only occurs
if no node was specified.

Signed-off-by: Christoph Lameter <cl@linux-foundation.org>
Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi>
2010-07-29 12:59:00 +03:00
Peter Ujfalusi
a577b318fc ASoC: tlv320dac33: Add support for automatic FIFO configuration
Platform parameter to enable automatic FIFO configuration when
the codec is in Mode1 or Mode7 FIFO mode.
When this mode is selected, the controls for changing
nSample (in Mode1), and UTHR (in Mode7) are not added.
The driver configures the FIFO configuration based on
the stream's period size in a way, that every burst will
read period size of data from the host.
In Mode7 we need to use a formula, which gives close enough
aproximation for the burst length from the host point
of view.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com>
Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-07-29 10:21:11 +01:00