Impact: cleanup, futureproof
In fact, all cpumask ops will only be valid (in general) for bit
numbers < nr_cpu_ids. So use that instead of NR_CPUS in various
places.
This is always safe: no cpu number can be >= nr_cpu_ids, and
nr_cpu_ids is initialized to NR_CPUS at boot.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Mike Travis <travis@sgi.com>
Acked-by: Ingo Molnar <mingo@elte.hu>
This patch simply changes cpumask_t to struct cpumask and similar
trivial modernizations.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Mike Travis <travis@sgi.com>
Impact: cleanup, remove on-stack cpumask.
The "map" arg is always cpu_online_mask. Importantly, set_affinity
always ands the argument with cpu_online_mask anyway, so we don't need
to do it in fixup_irqs(), avoiding a temporary.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Mike Travis <travis@sgi.com>
Simple change, and eventual space saving when NR_CPUS >> nr_cpu_ids.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Mike Travis <travis@sgi.com>
Cc: Jeremy Fitzhardinge <jeremy@xensource.com>
Impact: cleanup, consolidate patches, use new API
Consolidate the following into a single patch to adapt to new
sparseirq code in arch/x86/kernel/io_apic.c, add allocation of
cpumask_var_t's in domain and old_domain, and reduce further
merge conflicts. Only one file (arch/x86/kernel/io_apic.c) is
changed in all of these patches.
0006-x86-io_apic-change-irq_cfg-domain-old_domain-to.patch
0007-x86-io_apic-set_desc_affinity.patch
0008-x86-io_apic-send_cleanup_vector.patch
0009-x86-io_apic-eliminate-remaining-cpumask_ts-from-st.patch
0021-x86-final-cleanups-in-io_apic-to-use-new-cpumask-AP.patch
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Mike Travis <travis@sgi.com>
Impact: use updated APIs
Various API updates for x86:add-cpu_mask_to_apicid_and
(Note: separate because previous patch has been "backported" to 2.6.27.)
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Mike Travis <travis@sgi.com>
Impact: new API
Add a helper function that takes two cpumask's, and's them and then
returns the apicid of the result. This removes a need in io_apic.c
that uses a temporary cpumask to hold (mask & cfg->domain).
Signed-off-by: Mike Travis <travis@sgi.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Impact: cleanup, better debugging
This has proven useful in debugging, *before* we try to use
for_each_possible_cpu(). It also now shows nr_cpumask_bits.
Signed-off-by: Mike Travis <travis@sgi.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Impact: cleanup, change parameter passing
* Change genapic interfaces to accept cpumask_t pointers where possible.
* Modify external callers to use cpumask_t pointers in function calls.
* Create new send_IPI_mask_allbutself which is the same as the
send_IPI_mask functions but removes smp_processor_id() from list.
This removes another common need for a temporary cpumask_t variable.
* Functions that used a temp cpumask_t variable for:
cpumask_t allbutme = cpu_online_map;
cpu_clear(smp_processor_id(), allbutme);
if (!cpus_empty(allbutme))
...
become:
if (!cpus_equal(cpu_online_map, cpumask_of_cpu(cpu)))
...
* Other minor code optimizations (like using cpus_clear instead of
CPU_MASK_NONE, etc.)
Applies to linux-2.6.tip/master.
Signed-off-by: Mike Travis <travis@sgi.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Acked-by: Ingo Molnar <mingo@elte.hu>
Impact: activates new off-stack cpumask code on MAXSMP (non-default) x86 configs
Set MAXSMP to enable CONFIG_CPUMASK_OFFSTACK which moves cpumask's off
the stack (and in structs) when using cpumask_var_t.
Signed-off-by: Mike Travis <travis@sgi.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Acked-by: Ingo Molnar <mingo@elte.hy>
In each case, if the NULL test is necessary, then the dereference should be
moved below the NULL test.
The semantic patch that makes this change is as follows:
(http://www.emn.fr/x-info/coccinelle/)
// <smpl>
@@
type T;
expression E;
identifier i,fld;
statement S;
@@
- T i = E->fld;
+ T i;
... when != E
when != i
if (E == NULL) S
+ i = E->fld;
// </smpl>
Signed-off-by: Julia Lawall <julia@diku.dk>
Signed-off-by: David S. Miller <davem@davemloft.net>
starfire napi ->poll() handler can return work == weight after calling
netif_rx_complete() (if there is no more work). It is illegal and this
patch fixes it.
Reported-by: Alexander Huemer <alexander.huemer@sbg.ac.at>
Tested-by: Alexander Huemer <alexander.huemer@sbg.ac.at>
Signed-off-by: Jarek Poplawski <jarkao2@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
genphy_setup_forced hasn't actually reset the PHY for a long time,
but a comment to that effect remained in the code, so code continued
to act as if it *had* reset the PHY, and called the necessary fixup
functions to respond to a PHY reset. With no reset, those functions
are no longer needed, so we remove them.
Signed-off-by: Andy Fleming <afleming@freescale.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Whenever we want to update the status field in a BD, we usually want to
update the length field, too. By combining them into one 32-bit field, we
reduce the number of stores to memory shared with the controller, and we
eliminate the need for order-enforcement, as the length and "READY" bit are
now updated atomically at the same time.
Signed-off-by: Dai Haruki <Dai.Haruki@freescale.com>
Signed-off-by: Andy Fleming <afleming@freescale.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This code is based strongly on code from Dai Haruki <Dai.Haruki@freescale.com>.
The gianfar Buffer Descriptors are arranged in a circular array, the end of
which is denoted by setting the "WRAP" bit in the descriptor. However, the
software knows the end of the ring because it knows how many descriptors are
there. Rather than check each descriptor for whether the WRAP bit is set,
use pointer math to determine where the next BD is. This is also useful for
when we want to look at BDs other than the very next one (for Scatter-Gather).
Signed-off-by: Andy Fleming <afleming@freescale.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
- Also, use cacheable_memzero instead of memset for performance reasons.
Signed-off-by: Dai Haruki <dai.haruki@freescale.com>
Acked-by: Andy Fleming <afleming@freescale.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The eTSEC can prepend up to 32 bytes to a received frame, usually for the
purpose of aligning the IP address to a word boundary, so this turns it on.
While we're in there, make the handling of the pre-frame bytes (padding and
Frame Control Block) cleaner.
Signed-off-by: Dai Haruki <dai.haruki@freescale.com>
Signed-off-by: Andy Fleming <afleming@freescale.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Optimize the VLAN checking logic as well.
Signed-off-by: Dai Haruki <dai.haruki@freescale.com>
Acked-by: Andy Fleming <afleming@freescale.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Fix some bugs in the ethtool configuration functions:
* gfar_clean_rx_ring should not be called with interrupts disabled.
* Update last transmission time to avoid tx timeout.
* Delete redundant NETIF_F_IP_CSUM check in gfar_start_xmit
* Use netif_tx_lock_bh when reconfiguring the tx csum
Signed-off-by: Dai Haruki <dai.haruki@freescale.com>
Signed-off-by: Andy Fleming <afleming@freescale.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Store the interrupt coalescing values in the form in which they will be
written to the interrupt coalescing registers. This puts a little overhead
into the ethtool configuration, and takes it out of the interrupt handler
Signed-off-by: Dai Haruki <dai.haruki@freescale.com>
Acked-by: Andy Fleming <afleming@freescale.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Does the same for the accompanying MDIO driver, and then modifies the TBI
configuration method. The old way used fields in einfo, which no longer
exists. The new way is to create an MDIO device-tree node for each instance
of gianfar, and create a tbi-handle property to associate ethernet controllers
with the TBI PHYs they are connected to.
Signed-off-by: Andy Fleming <afleming@freescale.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Impact: clean up
Itroduce MCOUNT_SAVE/RESTORE_FRAME which allow us to
save a number of lines on source level.
Also fix a comment in ftrace.h.
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: display ftrace_printk messages "as is"
By default, ftrace_printk() messages find their output with some other
informations like pid, caller, ...
Sometimes a developer just want to have the ftrace_printk left "as is", without
other information.
This is done by providing a default-off option called printk-msg-only.
To enable it, just do `echo printk-msg-only > /debugfs/tracing/trace_options`
Before the patch:
<...>-2739 [000] 145.692153: __might_sleep: I'm an ftrace_printk msg in __might_sleep
<...>-2739 [000] 145.692155: __might_sleep: I'm another ftrace_printk msg in __might_sleep
After the patch and the printk-msg-only option enabled:
I'm an ftrace_printk msg in __might_sleep
I'm another ftrace_printk msg in __might_sleep
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: prevent a trace recursion
After some tests with function graph tracer under x86-32, I saw some recursions
caused by ring_buffer_time_stamp() that calls preempt_enable_no_notrace() which
calls preempt_schedule() which is traced itself.
This patch re-enables preemption without rescheduling.
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
gfar_halt does everything we want to do there, including disabling
TX/RX. It also doesn't unnecessarily enable DMA if it's already
stopped.
Signed-off-by: Andy Fleming <afleming@freescale.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The big rx/tx buffer support is broken and unlikely to be very useful
as such. Remove it.
Signed-off-by: Sakari Ailus <sakari.ailus@iki.fi>
Signed-off-by: David S. Miller <davem@davemloft.net>
Fix pci unmapping problem introduced by commit id
8953f12827 "tlan: Fix small (< 64 bytes)
datagram transmissions".
Signed-off-by: Sakari Ailus <sakari.ailus@iki.fi>
Signed-off-by: David S. Miller <davem@davemloft.net>
Impact: build fix
make intr_remapping.c to include smp.h, so could use boot_cpu_id there
also remove old change that disabling sparseirq with !SMP
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: improve NUMA handling by migrating irq_desc on smp_affinity changes
if CONFIG_NUMA_MIGRATE_IRQ_DESC is set:
- make irq_desc to go with affinity aka irq_desc moving etc
- call move_irq_desc in irq_complete_move()
- legacy irq_desc is not moved, because they are allocated via static array
for logical apic mode, need to add move_desc_in_progress_in_same_domain,
otherwise it will not be moved ==> also could need two phases to get
irq_desc moved.
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: fix very rare reboot hang
Because rcutorture ignored all signals, it does not terminate in
response to the signals sent at shutdown time. This can cause strange
failures due to its continuing to make use of kernel function too late
in the shutdown sequence. This patch therefore adds a shutdown notifier
to rcutorture, causing it to shut down in response to a reboot or an
orderly shutdown.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: reduce false positives in iomem_map_sanity_check()
Some drivers (vesafb) only map/reserve a portion of a resource.
If then some other driver comes in and maps the whole resource,
the current code WARN_ON's. This is not the intent of the checks
in iomem_map_sanity_check(); rather these checks want to
warn when crossing *hardware* resources only.
This patch skips BUSY resources as suggested by Linus.
Note: having two drivers talk to the same hardware at the same
time is obviously not optimal behavior, but that's a separate story.
Signed-off-by: Arjan van de Ven <arjan@linux.intel.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Ingo Molnar wrote:
> allyes64 build failure:
>
> arch/x86/kernel/io_apic.c: In function ‘set_ir_ioapic_affinity_irq_desc’:
> arch/x86/kernel/io_apic.c:2295: error: incompatible type for argument 2 of
> ‘migrate_ioapic_irq_desc’
> arch/x86/kernel/io_apic.c: In function ‘ir_set_msi_irq_affinity’:
> arch/x86/kernel/io_apic.c:3205: error: incompatible type for argument 2 of
> ‘set_extra_move_desc’
> make[1]: *** wait: No child processes. Stop.
Here's a small patch to correct the build error with the post-merge tree.
Built and boot-tested. I'll will reset the follow on patches in my brand
new git tree to accommodate this change.
Fix two references in io_apic.c that were incorrect.
Signed-off-by: Mike Travis <travis@sgi.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
The probe function used a pointer to the interrupt
handler to register as a 'void *', change it to the
proper type of irq_handler_t.
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
When we create xattr bucket during the process of xattr set, we always
need to update the ocfs2_xattr_search since even if the bucket size is
the same as block size, the offset will change because of the removal
of the ocfs2_xattr_block header.
Signed-off-by: Tao Ma <tao.ma@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
Impact: cleanup
Use __USER32_DS instead of __USER_DS in ia32_signal.c.
No impact, because __USER32_DS is defined __USER_DS.
Signed-off-by: Hiroshi Shimamoto <h-shimamoto@ct.jp.nec.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: cleanup
__put_user() can be used for constant size 8, like arch/x86/kernel/signal.c.
Signed-off-by: Hiroshi Shimamoto <h-shimamoto@ct.jp.nec.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: cleanup
Call signal_fault() in error route of sys_sigreturn().
Change log level to KERN_EMERG if current is init.
Signed-off-by: Hiroshi Shimamoto <h-shimamoto@ct.jp.nec.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: fix crash
xpc needs to pass the physical address, not virtual.
Testing uncovered this problem. The virtual address happens to work
most of the time due to the way bios was masking off the node bits.
Passing the physical address makes it work all of the time.
Signed-off-by: Russ Anderson <rja@sgi.com>
Acked-by: Dean Nelson <dcn@sgi.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: fix disabled MCE after resume
Don't prevent multiple initialization of MCEs.
Back from early prehistory mcheck_init() has a reentry check. Presumably
that was needed in very old kernels to prevent it entering twice.
But as Andreas points out this prevents CPU hotplug (and therefore resume)
to correctly reinitialize MCEs when a AP boots again after being
offlined.
Just drop the check.
Reported-by: Andreas Herrmann <andreas.herrmann3@amd.com>
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Tested-by: Andreas Herrmann <andreas.herrmann3@amd.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: fix UV boot crash
This fixes a UV bug related to generating global memory addresses
on partitioned systems. Partition systems do not have physical memory
at address 0. Instead, a chunk of high memory is remapped by the chipset
so that it appears to be at address 0. This remapping is INVISIBLE to most
of the OS. The only OS functions that need to be aware of the remaping are
functions that directly interface to the chipset. The GRU is one example.
Also, delete a couple of unused macros related to global memory addresses.
Signed-off-by: Jack Steiner <steiner@sgi.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: cleanup, remove dead debug code
I ran across some old debugging code in vmi paravirt-ops code that was
already dead, but still potentially useful. After reviewing recent
changes to the way kernel page tables are allocated and initialized, and
the lack of bugs caught by this debugging code, I've concluded it is now
totally useless to have around, and it's already been #if 0'd for quite
some time.
There's no rush to get this in mainline, but it's also totally harmless,
so I'll let the x86 maintainers decide where it should be tucked. I've
been out of the mainstream dev loop for a couple months, so apologies if
I haven't got any protocol changes in order.
Remove mummified remains found in vmi_32.c
Signed-off-by: Zachary Amsden <zach@vmware.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Certain HP machines require the full 64 bits of _SUN as allowed
by the ACPI spec. Without this change, we get name collisions in
the lower 32 bits of the _SUN returned by firmware.
Acked-by: Matthew Wilcox <willy@linux.intel.com>
Signed-off-by: Justin Chen <justin.chen@hp.com>
Signed-off-by: Alex Chiang <achiang@hp.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
This patch fixes the problem that causes an occupied slot to be turned
off even if it has a working device.
Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
What we have to check here before calling is err_handler->resume, not
->slot_reset. Looks like a copy & paste error from report_slot_reset.
Acked-by: Yanmin Zhang <yanmin.zhang@intel.com>
Signed-off-by: Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>