As preparation for moving the discovery HCI commands behind
req_workqueue, add a helper and do the validity checks of the given
discovery type before proceeding further. This way we don't need to do
them again in hci_request.c.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
To avoid any risks of races, place also these LE scan modification
work callbacks behind the same work queue as the other LE scan
changes.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
There are no more external users so this API can be made private.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
We can easily use the new req_workqueue based background scan update
for the power on case. This also removes the last external user of
__hci_update_background_scan().
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Since explicit connect requests are also a sub-category of passive
scan updates, run them through the same workqueue as the other passive
scan changes.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
In some cases it may be important to get the exact HCI status rather
than the converted HCI-to-errno value. Add an optional return
parameter to the hci_req_sync() API to allow for this. Since there are
no good HCI translation candidates for cancelation and timeout, use
the "unknown" status code for those cases.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
There's no point in waiting for HCI activity in Add/Remove Device
since the effects of these calls are long-lasting and we can anyway
not report up to the application all HCI failures.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Instead of firing off a simple async request queue all background scan
updates through req_workqueue and use hci_req_sync() there to ensure
that no two updates overlap with each other.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Prepare hci_request.c to have code for doing synchronous HCI requests,
such as LE scanning or advertising changes. The necessary work
callbacks will be set up in hci_request_setup() and cleaned up in
hci_request_cancel_all(). The former is used when an HCI device get
registered, and the latter each time it is powered off (or
unregistered).
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
To make it clear which HCI request APIs target specifically
synchronous requests, add 'sync' to the API names.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
hci_request.c is a more natural place for the synchronous request
handling. Furthermore, we will soon need access to some of the
previously private-to-hci_core.c functions from hci_request.c.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
The hci_conn_params_clear_all() function is only called from
hci_unregister_dev() at which point it's completely futile to try to
do any LE scanning updates. Simply remove this unnecessary function
call. At the same time we can make the function static since it's only
accessed from within the same c-file.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
To enable controller specific logging, the userspace daemon has to have
the ability to log per controller. To facilitate this support, provide
a dedicated logging channel. Messages in this channel will be included
in the monitor queue and with that also forwarded to monitoring tools
along with the actual hardware traces.
All messages from the logging channel are timestamped and with that
allow an easy correlation between userspace messages and hardware
events. This will increase the ability to debug problems faster.
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
The monitor channel can be used to send generic system notes as text
strings for debugging purposes. This adds the system note monitor code
and uses it for including kernel and subsystem version into traces.
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
The HCI sockets code has still some old casting coding style. Fix this
to match with the rest of the code.
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
It's not obvious why schedule_work is used instead of queue_work. Add
a comment explaining why.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
When HCI commands are injected via the raw socket, the core was not
including the decoded opcode value. So ensure that it is actually set.
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
We can reduce the size of the hci_ctrl struct by converting
'bool req_start' to 'u8 req_flags' and making the two function
pointers a union (since only one is ever set at a time).
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
The socket allocation functions will always memset skb->cb to zero so
there's no need to make other initializations needing the same thing.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
The new hci_skb_pkt_* wrappers are mainly intented for drivers to
require less knowledge about bt_cb(sbk) handling. So after converting
the core packet handling, convert all drivers.
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
The new hci_skb_pkt_* wrappers only help if they are used consistently
in the Bluetooth subsystem. So first convert the core packet handling.
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
For all the HCI driver related variables accesssed via bt_cb(skb),
provide helper wrappers.
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
For the LE only controllers, there are events that should not be enabled
if the corresponding command is not supported.
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
When setting the event mask, the HCI_QUIRK_FIXUP_INQUIRY_MODE quirk is
required to be checked so that the Inquiry Result with RSSI event gets
actually enabled.
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
The LE event mask should be created based on the commands that are
actually supported by the controller.
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
There are some BR/EDR default events for Bluetooth 1.2 or later
controllers that are not conditional on their features being present.
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
The folded callchain mode is to print all chains in a single line.
Currently perf report --gtk doesn't support folded callchains. Like
flat callchains, only leaf nodes are added to the final rbtree so it
should show entries in parent nodes.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Tested-by: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1447047946-1691-11-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The flat callchain mode is to print all chains in a simple flat
hierarchy so make it easy to see.
Currently perf report --gtk doesn't show flat callchains properly. With
flat callchains, only leaf nodes are added to the final rbtree so it
should show entries in parent nodes. To do that, add parent_val list to
struct callchain_node and show them along with the (normal) val list.
See the previous commit on TUI support for more information.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Tested-by: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1447047946-1691-10-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The folded callchain mode prints all chains in a single line.
Currently perf report --tui doesn't support folded callchains. Like
flat callchains, only leaf nodes are added to the final rbtree so it
should show entries in parent nodes. To do that, add flat_val list to
struct callchain_node and show them along with the (normal) val list.
For example, folded callchain looks like below:
$ perf report -g folded --tui
Samples: 234 of event 'cycles:pp', Event count (approx.): 32605268
Overhead Command Shared Object Symbol
- 39.93% swapper [kernel.vmlinux] [k] intel_idle
+ 28.63% intel_idle; cpuidle_enter_state; cpuidle_enter; ...
+ 11.30% intel_idle; cpuidle_enter_state; cpuidle_enter; ...
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Tested-by: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1447047946-1691-9-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The flat callchain mode is to print all chains in a single, simple
hierarchy so make it easy to see.
Currently perf report --tui doesn't show flat callchains properly. With
flat callchains, only leaf nodes are added to the final rbtree so it
should show entries in parent nodes. To do that, add parent_val list to
struct callchain_node and show them along with the (normal) val list.
For example, consider following callchains with '-g graph'.
$ perf report -g graph
- 39.93% swapper [kernel.vmlinux] [k] intel_idle
intel_idle
cpuidle_enter_state
cpuidle_enter
call_cpuidle
- cpu_startup_entry
28.63% start_secondary
- 11.30% rest_init
start_kernel
x86_64_start_reservations
x86_64_start_kernel
Before:
$ perf report -g flat
- 39.93% swapper [kernel.vmlinux] [k] intel_idle
28.63% start_secondary
- 11.30% rest_init
start_kernel
x86_64_start_reservations
x86_64_start_kernel
After:
$ perf report -g flat
- 39.93% swapper [kernel.vmlinux] [k] intel_idle
- 28.63% intel_idle
cpuidle_enter_state
cpuidle_enter
call_cpuidle
cpu_startup_entry
start_secondary
- 11.30% intel_idle
cpuidle_enter_state
cpuidle_enter
call_cpuidle
cpu_startup_entry
start_kernel
x86_64_start_reservations
x86_64_start_kernel
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Tested-by: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1447047946-1691-8-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This function is to print a single callchain list entry. As this
function will be used by other function, factor out to a separate
function.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1447047946-1691-7-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Now -g/--call-graph option supports how to display callchain values.
Possible values are 'percent', 'period' and 'count'. The percent is
same as before and it's the default behavior. The period displays the
raw period value rather than the percentage. The count displays the
number of occurrences.
$ perf report --no-children --stdio -g percent
...
39.93% swapper [kernel.vmlinux] [k] intel_idel
|
---intel_idle
cpuidle_enter_state
cpuidle_enter
call_cpuidle
cpu_startup_entry
|
|--28.63%-- start_secondary
|
--11.30%-- rest_init
$ perf report --no-children --show-total-period --stdio -g period
...
39.93% 13018705 swapper [kernel.vmlinux] [k] intel_idel
|
---intel_idle
cpuidle_enter_state
cpuidle_enter
call_cpuidle
cpu_startup_entry
|
|--9334403-- start_secondary
|
--3684302-- rest_init
$ perf report --no-children --show-nr-samples --stdio -g count
...
39.93% 80 swapper [kernel.vmlinux] [k] intel_idel
|
---intel_idle
cpuidle_enter_state
cpuidle_enter
call_cpuidle
cpu_startup_entry
|
|--57-- start_secondary
|
--23-- rest_init
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1447047946-1691-6-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
It's to track the count of occurrences of the callchains.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Brendan Gregg <brendan.d.gregg@gmail.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1447047946-1691-5-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This is a preparation to support for printing other type of callchain
value like count or period.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Tested-by: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1447047946-1691-4-git-send-email-namhyung@kernel.org
[ renamed new _sprintf_ operation to _scnprintf_ ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add new call chain option (-g) 'folded' to print callchains in a line.
The callchains are separated by semicolons, and preceded by (absolute)
percent values and a space.
For example, the following 20 lines can be printed in 3 lines with the
folded output mode:
$ perf report -g flat --no-children | grep -v ^# | head -20
60.48% swapper [kernel.vmlinux] [k] intel_idle
54.60%
intel_idle
cpuidle_enter_state
cpuidle_enter
call_cpuidle
cpu_startup_entry
start_secondary
5.88%
intel_idle
cpuidle_enter_state
cpuidle_enter
call_cpuidle
cpu_startup_entry
rest_init
start_kernel
x86_64_start_reservations
x86_64_start_kernel
$ perf report -g folded --no-children | grep -v ^# | head -3
60.48% swapper [kernel.vmlinux] [k] intel_idle
54.60% intel_idle;cpuidle_enter_state;cpuidle_enter;call_cpuidle;cpu_startup_entry;start_secondary
5.88% intel_idle;cpuidle_enter_state;cpuidle_enter;call_cpuidle;cpu_startup_entry;rest_init;start_kernel;x86_64_start_reservations;x86_64_start_kernel
This mode is supported only for --stdio now and intended to be used by
some scripts like in FlameGraphs[1]. Support for other UI might be
added later.
[1] http://www.brendangregg.com/FlameGraphs/cpuflamegraphs.html
Requested-and-Tested-by: Brendan Gregg <brendan.d.gregg@gmail.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1447047946-1691-2-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Fix machine__findnew_module_map to drop the reference to the dso because
it is already referenced by both machine__findnew_module_dso() and
map__new2().
Refcnt debugger shows:
==== [1] ====
Unreclaimed dso: 0x1ffd980
Refcount +1 => 1 at
./perf(dso__new+0x1ff) [0x4a62df]
./perf(__dsos__addnew+0x29) [0x4a6e19]
./perf() [0x4b8b91]
./perf(modules__parse+0xfc) [0x4a9d5c]
./perf() [0x4b8460]
./perf(machine__create_kernel_maps+0x150) [0x4bb550]
./perf(machine__new_host+0xfa) [0x4bb75a]
./perf(init_probe_symbol_maps+0x93) [0x506623]
./perf() [0x455ffa]
./perf(cmd_probe+0x6c) [0x4566bc]
./perf() [0x47abc5]
./perf(main+0x610) [0x421f90]
/lib64/libc.so.6(__libc_start_main+0xf5) [0x7f1345a8eaf5]
./perf() [0x4220a9]
This map_groups__insert(0x4b8b91) already gets a reference to the new
dso:
----
eu-addr2line -e ./perf -f 0x4b8b91
map_groups__insert inlined at util/machine.c:586 in
machine__create_module
util/map.h:207
----
So this dso refcnt will be released when map_groups gets released.
[snip]
Refcount +1 => 2 at
./perf(dso__get+0x34) [0x4a65f4]
./perf() [0x4b8b35]
./perf(modules__parse+0xfc) [0x4a9d5c]
./perf() [0x4b8460]
./perf(machine__create_kernel_maps+0x150) [0x4bb550]
./perf(machine__new_host+0xfa) [0x4bb75a]
./perf(init_probe_symbol_maps+0x93) [0x506623]
./perf() [0x455ffa]
./perf(cmd_probe+0x6c) [0x4566bc]
./perf() [0x47abc5]
./perf(main+0x610) [0x421f90]
/lib64/libc.so.6(__libc_start_main+0xf5) [0x7f1345a8eaf5]
./perf() [0x4220a9]
Here, machine__findnew_module_dso(0x4b8b35) gets the dso (and stores it
in a local variable):
----
# eu-addr2line -e ./perf -f 0x4b8b35
machine__findnew_module_dso inlined at util/machine.c:578 in
machine__create_module
util/machine.c:514
----
Refcount +1 => 3 at
./perf(dso__get+0x34) [0x4a65f4]
./perf(map__new2+0x76) [0x4be1c6]
./perf() [0x4b8b4f]
./perf(modules__parse+0xfc) [0x4a9d5c]
./perf() [0x4b8460]
./perf(machine__create_kernel_maps+0x150) [0x4bb550]
./perf(machine__new_host+0xfa) [0x4bb75a]
./perf(init_probe_symbol_maps+0x93) [0x506623]
./perf() [0x455ffa]
./perf(cmd_probe+0x6c) [0x4566bc]
./perf() [0x47abc5]
./perf(main+0x610) [0x421f90]
/lib64/libc.so.6(__libc_start_main+0xf5) [0x7f1345a8eaf5]
./perf() [0x4220a9]
But also map__new2() gets the dso which will be put when the map is
released.
So, we have to drop the constructor reference obtained in
machine__findnew_module_dso().
Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/20151118064035.30709.58824.stgit@localhost.localdomain
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
__dsos__addnew should drop the constructor reference to dso after adding
it to the list, because __dsos__add() will get a reference that will be
kept while it is in the list.
This fixes DSO leaks when entries are removed to the list and the refcount
never gets to zero.
Refcnt debugger shows:
==== [0] ====
Unreclaimed dso: 0x2fccab0
Refcount +1 => 1 at
./perf(dso__new+0x1ff) [0x4a62df]
./perf(__dsos__addnew+0x29) [0x4a6e19]
./perf(dsos__findnew+0xd1) [0x4a7281]
./perf(machine__findnew_kernel+0x27) [0x4a5e17]
./perf() [0x4b8df2]
./perf(machine__create_kernel_maps+0x28) [0x4bb528]
./perf(machine__new_host+0xfa) [0x4bb84a]
./perf(init_probe_symbol_maps+0x93) [0x506713]
./perf() [0x455ffa]
./perf(cmd_probe+0x6c) [0x4566bc]
./perf() [0x47abc5]
./perf(main+0x610) [0x421f90]
/lib64/libc.so.6(__libc_start_main+0xf5) [0x7f46df132af5]
./perf() [0x4220a9]
Refcount +1 => 2 at
./perf(__dsos__addnew+0xfb) [0x4a6eeb]
./perf(dsos__findnew+0xd1) [0x4a7281]
./perf(machine__findnew_kernel+0x27) [0x4a5e17]
./perf() [0x4b8df2]
./perf(machine__create_kernel_maps+0x28) [0x4bb528]
./perf(machine__new_host+0xfa) [0x4bb84a]
./perf(init_probe_symbol_maps+0x93) [0x506713]
./perf() [0x455ffa]
./perf(cmd_probe+0x6c) [0x4566bc]
./perf() [0x47abc5]
./perf(main+0x610) [0x421f90]
/lib64/libc.so.6(__libc_start_main+0xf5) [0x7f46df132af5]
./perf() [0x4220a9]
Refcount +1 => 3 at
./perf(dsos__findnew+0x7e) [0x4a722e]
./perf(machine__findnew_kernel+0x27) [0x4a5e17]
./perf() [0x4b8df2]
./perf(machine__create_kernel_maps+0x28) [0x4bb528]
./perf(machine__new_host+0xfa) [0x4bb84a]
./perf(init_probe_symbol_maps+0x93) [0x506713]
./perf() [0x455ffa]
./perf(cmd_probe+0x6c) [0x4566bc]
./perf() [0x47abc5]
./perf(main+0x610) [0x421f90]
/lib64/libc.so.6(__libc_start_main+0xf5) [0x7f46df132af5]
./perf() [0x4220a9]
[snip]
Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/20151118064031.30709.81460.stgit@localhost.localdomain
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Fix dso__load_sym to put the map object which is already
insterted to kmaps.
Refcnt debugger shows
==== [0] ====
Unreclaimed map: 0x39113e0
Refcount +1 => 1 at
./perf(map__new2+0xb5) [0x4be155]
./perf(dso__load_sym+0xee1) [0x503461]
./perf(dso__load_vmlinux+0xbf) [0x4aa6df]
./perf(dso__load_vmlinux_path+0x8c) [0x4aa83c]
./perf() [0x50528a]
./perf(convert_perf_probe_events+0xd79) [0x50ac29]
./perf() [0x45600f]
./perf(cmd_probe+0x6c) [0x4566bc]
./perf() [0x47abc5]
./perf(main+0x610) [0x421f90]
/lib64/libc.so.6(__libc_start_main+0xf5) [0x7f152368baf5]
./perf() [0x4220a9]
Refcount +1 => 2 at
./perf(maps__insert+0x9a) [0x4bfffa]
./perf(dso__load_sym+0xf89) [0x503509]
./perf(dso__load_vmlinux+0xbf) [0x4aa6df]
./perf(dso__load_vmlinux_path+0x8c) [0x4aa83c]
./perf() [0x50528a]
./perf(convert_perf_probe_events+0xd79) [0x50ac29]
./perf() [0x45600f]
./perf(cmd_probe+0x6c) [0x4566bc]
./perf() [0x47abc5]
./perf(main+0x610) [0x421f90]
/lib64/libc.so.6(__libc_start_main+0xf5) [0x7f152368baf5]
./perf() [0x4220a9]
Refcount -1 => 1 at
./perf(map_groups__exit+0x94) [0x4bed04]
./perf(machine__delete+0xb0) [0x4b9300]
./perf(exit_probe_symbol_maps+0x28) [0x506608]
./perf() [0x45628a]
./perf(cmd_probe+0x6c) [0x4566bc]
./perf() [0x47abc5]
./perf(main+0x610) [0x421f90]
/lib64/libc.so.6(__libc_start_main+0xf5) [0x7f152368baf5]
./perf() [0x4220a9]
This means that the dso__load_sym calls map__new2 and maps_insert, both
of them bump the map refcount, but map_groups__exit will drop just one
reference.
Fix it by dropping the refcount after inserting it into kmaps.
Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/20151118064026.30709.50038.stgit@localhost.localdomain
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Since system_path() returns malloc'd string if given path is not an
absolute path, perf_exec_path() sometimes returns a static string and
sometimes returns a malloc'd string depending on the environment
variables or command options.
This may cause a memory leak because the caller can not unconditionally
free the returned string.
This fixes perf_exec_path() and system_path() to always return a
malloc'd string, so the caller can always free it.
Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/20151119060453.14210.65666.stgit@localhost.localdomain
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Actually machine__exit forgot to call machine__destroy_kernel_maps.
This fixes some memory leaks on map as below.
Without this fix.
----
./perf probe vfs_read
Added new event:
probe:vfs_read (on vfs_read)
You can now use it in all perf tools, such as:
perf record -e probe:vfs_read -aR sleep 1
REFCNT: BUG: Unreclaimed objects found.
REFCNT: Total 4 objects are not reclaimed.
To see all backtraces, rerun with -v option
----
With this fix.
----
./perf probe vfs_read
Added new event:
probe:vfs_read (on vfs_read)
You can now use it in all perf tools, such as:
perf record -e probe:vfs_read -aR sleep 1
REFCNT: BUG: Unreclaimed objects found.
REFCNT: Total 2 objects are not reclaimed.
To see all backtraces, rerun with -v option
----
Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/20151118064024.30709.43577.stgit@localhost.localdomain
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Fix machine object to drop the reference to the map object after it
inserted it into machine->kmaps.
refcnt debugger shows what happened:
----
==== [2] ====
Unreclaimed map: 0x346f750
Refcount +1 => 1 at
./perf(map__new2+0xb5) [0x4bdea5]
./perf() [0x4b8aaf]
./perf(modules__parse+0xfc) [0x4a9cbc]
./perf() [0x4b83c0]
./perf(machine__create_kernel_maps+0x148) [0x4bb208]
./perf(machine__new_host+0xfa) [0x4bb3fa]
./perf(init_probe_symbol_maps+0x93) [0x5062b3]
./perf() [0x455ffa]
./perf(cmd_probe+0x6c) [0x4566bc]
./perf() [0x47abc5]
./perf(main+0x610) [0x421f90]
/lib64/libc.so.6(__libc_start_main+0xf5) [0x7f5373899af5]
./perf() [0x4220a9]
Refcount +1 => 2 at
./perf(maps__insert+0x9a) [0x4bfd4a]
./perf() [0x4b8acb]
./perf(modules__parse+0xfc) [0x4a9cbc]
./perf() [0x4b83c0]
./perf(machine__create_kernel_maps+0x148) [0x4bb208]
./perf(machine__new_host+0xfa) [0x4bb3fa]
./perf(init_probe_symbol_maps+0x93) [0x5062b3]
./perf() [0x455ffa]
./perf(cmd_probe+0x6c) [0x4566bc]
./perf() [0x47abc5]
./perf(main+0x610) [0x421f90]
/lib64/libc.so.6(__libc_start_main+0xf5) [0x7f5373899af5]
./perf() [0x4220a9]
Refcount -1 => 1 at
./perf(map_groups__exit+0x94) [0x4bea54]
./perf(machine__delete+0x3d) [0x4b91ed]
./perf(exit_probe_symbol_maps+0x28) [0x506358]
./perf() [0x45628a]
./perf(cmd_probe+0x6c) [0x4566bc]
./perf() [0x47abc5]
./perf(main+0x610) [0x421f90]
/lib64/libc.so.6(__libc_start_main+0xf5) [0x7f5373899af5]
./perf() [0x4220a9]
----
This pattern clearly shows that the refcnt of the map is acquired twice
by map__new2 and maps__insert but released onlu once at
map_groups__exit, when we purge its maps rbtree.
Since maps__insert already reference counted the map, we have to drop
the constructor (map__new2) reference count right after inserting it.
These happened in machine__findnew_module_map, as below.
----
# eu-addr2line -e ./perf -f 0x4b8aaf
machine__findnew_module_map inlined at util/machine.c:1046
in machine__create_module
util/machine.c:582
# eu-addr2line -e ./perf -f 0x4b8acb
map_groups__insert inlined at util/machine.c:585
in machine__create_module
util/map.h:208
----
(note that both are at util/machine.c:58X which is
machine__findnew_module_map)
Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/20151118064020.30709.40499.stgit@localhost.localdomain
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Since dwarf_cfi_addrframe returns malloc'd Dwarf_Frame object, it has to
be freed after it is used.
Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/20151118064011.30709.65674.stgit@localhost.localdomain
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Sometimes error messages in breaks the pretty output of 'perf test'.
For example:
# mv /lib/modules/4.3.0-rc4+/build/vmlinux{,.bak}
# perf test LLVM BPF
35: Test LLVM searching and compiling :
35.1: Basic BPF llvm compiling test : Ok
35.2: Test kbuild searching : Ok
35.3: Compile source for BPF prologue generation test : Ok
37: Test BPF filter :
37.1: Test basic BPF filtering : Ok
37.2: Test BPF prologue generation :Failed to find the path for kernel: No such file or directory FAILED!
This patch mute test cases thoroughly by redirect their stdout and
stderr to /dev/null when verbose == 0. After applying this patch:
# ./perf test LLVM BPF
35: Test LLVM searching and compiling :
35.1: Basic BPF llvm compiling test : Ok
35.2: Test kbuild searching : Ok
35.3: Compile source for BPF prologue generation test : Ok
37: Test BPF filter :
37.1: Test basic BPF filtering : Ok
37.2: Test BPF prologue generation : FAILED!
# ./perf test -v LLVM BPF
35: Test LLVM searching and compiling :
35.1: Basic BPF llvm compiling test :
--- start ---
test child forked, pid 13183
Kernel build dir is set to /lib/modules/4.3.0-rc4+/build
set env: KBUILD_DIR=/lib/modules/4.3.0-rc4+/build
...
bpf: config 'func=null_lseek file->f_mode offset orig' is ok
Looking at the vmlinux_path (7 entries long)
Failed to find the path for kernel: No such file or directory
bpf_probe: failed to convert perf probe eventsFailed to add events selected by BPF
test child finished with -1
---- end ----
Test BPF filter subtest 1: FAILED!
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1447749170-175898-6-git-send-email-wangnan0@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This patch prints each sub-tests results for BPF testcases.
Before:
# ./perf test BPF
37: Test BPF filter : Ok
After:
# ./perf test BPF
37: Test BPF filter :
37.1: Test basic BPF filtering : Ok
37.2: Test BPF prologue generation : Ok
When a failure happens:
# cat ~/.perfconfig
[llvm]
clang-path = "/bin/false"
# ./perf test BPF
37: Test BPF filter :
37.1: Test basic BPF filtering : Skip
37.2: Test BPF prologue generation : Skip
Suggested-and-Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1447749170-175898-5-git-send-email-wangnan0@huawei.com
[ Fixed up not to use .func in an anonymous union ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Currently 'perf test llvm' and 'perf test BPF' have multiple sub-tests,
but the result is provided in only one line:
# perf test LLVM
35: Test LLVM searching and compiling : Ok
This patch introduces sub-tests support, allowing 'perf test' to report
result for each sub-tests:
# perf test LLVM
35: Test LLVM searching and compiling :
35.1: Basic BPF llvm compiling test : Ok
35.2: Test kbuild searching : Ok
35.3: Compile source for BPF prologue generation test : Ok
When a failure happens:
# cat ~/.perfconfig
[llvm]
clang-path = "/bin/false"
# perf test LLVM
35: Test LLVM searching and compiling :
35.1: Basic BPF llvm compiling test : FAILED!
35.2: Test kbuild searching : Skip
35.3: Compile source for BPF prologue generation test : Skip
And:
# rm ~/.perfconfig
# ./perf test LLVM
35: Test LLVM searching and compiling :
35.1: Basic BPF llvm compiling test : Skip
35.2: Test kbuild searching : Skip
35.3: Compile source for BPF prologue generation test : Skip
Skip by user:
# ./perf test -s 1,`seq -s , 3 42`
1: vmlinux symtab matches kallsyms : Skip (user override)
2: detect openat syscall event : Ok
...
35: Test LLVM searching and compiling : Skip (user override)
...
Suggested-and-Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1447749170-175898-4-git-send-email-wangnan0@huawei.com
[ Changed so that func is not on an anonymous union ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Some tests have sub-tests we want to run, so allow passing this.
Wang tried to avoid having to touch all tests, but then, having the
test.func in an anonymous union makes the build fail on older compilers,
like the one in RHEL6, where:
test a = {
.func = foo,
};
fails.
To fix it leave the func pointer in the main structure and pass the subtest
index to all tests, end result function is the same, but we have just one
function pointer, not two, with and without the subtest index as an argument.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-5genj0ficwdmelpoqlds0u4y@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add support for the DENX MCV SoM and MCVEVK baseboard. The SoM contains
eMMC, DRAM, Altera Cyclone V SoC. The baseboard contains CAN ports, UART
ports, STMPE811 touchscreen controller, USB OTG port, ethernet port and
a lot of IO pins.
Signed-off-by: Marek Vasut <marex@denx.de>
Reviewed-by: Steffen Trumtrar <s.trumtrar@pengutronix.de>
Cc: Vince Bridgers <vbridgers2013@gmail.com>
Cc: Alan Tull <atull@altera.com>
Cc: Thor Thayer <tthayer@altera.com>
Cc: Olof Johansson <olof@lixom.net>
Signed-off-by: Dinh Nguyen <dinguyen@opensource.altera.com>
intelfb_create() is called once on driver initialization. If it fails,
ifbdev->helper.fbdev, ifbdev->fb or ifbdev->fb->obj may be NULL.
Further up in the call stack, intel_fbdev_initial_config() calls
intel_fbdev_fini() to tear down the ifbdev on failure. This calls
intel_fbdev_destroy() which dereferences ifbdev->fb. Fix the ensuing
oops.
Also check in these functions if ifbdev is not NULL to avoid oops:
i915_gem_framebuffer_info() is called on access to debugfs file
"i915_gem_framebuffer" and dereferences ifbdev, ifbdev->helper.fb
and ifbdev->helper.fb->obj.
intel_connector_add_to_fbdev() / intel_connector_remove_from_fbdev()
are called when registering / unregistering an mst connector and
dereference ifbdev.
v3: Drop additional null pointer checks in intel_fbdev_set_suspend(),
intel_fbdev_output_poll_changed() and intel_fbdev_restore_mode()
since they already check if ifbdev is not NULL, which is sufficient
now that intel_fbdev_fini() is called on initialization failure.
(Requested by Daniel Vetter <daniel.vetter@ffwll.ch>)
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Link: http://patchwork.freedesktop.org/patch/msgid/d05f0edf121264a9d0adb8ca713fd8cc4ae068bf.1447938059.git.lukas@wunner.de
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
