This is needed for some of the Xeon Phi type systems.
[bhelgaas: added Nikhil, use ARRAY_SIZE() to connect with decl, folded in
Kevin's "order < 0" fix to ARRAY_SIZE() usage]
Signed-off-by: Nikhil P Rao <nikhil.rao@intel.com>
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Kevin Hilman <khilman@linaro.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
The resource map sanity check message is a bit confusing. Change it to be
more readable:
-resource map sanity check conflict: 0xfed10000 0xfed15fff 0xfed10000 0xfed13fff pnp 00:01
+resource sanity check: requesting [mem 0xfed10000-0xfed15fff], which spans more than pnp 00:01 [mem 0xfed10000-0xfed13fff]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
For a subtractive decode bridge, we previously added and printed all
resources of the primary bus, even if they were not valid. In the example
below, the bridge 00:1c.3 has no windows enabled, so there are no valid
resources on bus 02. But since 02:00.0 is subtractive decode bridge, we
add and print all those invalid resources, which don't really make sense:
pci 0000:00:1c.3: PCI bridge to [bus 02-03]
pci 0000:02:00.0: PCI bridge to [bus 03] (subtractive decode)
pci 0000:02:00.0: bridge window [??? 0x00000000 flags 0x0] (subtractive decode)
Add and print the subtractively-decoded resources only if they are valid.
There's an example in the dmesg log attached to the bugzilla below (but
this patch doesn't fix the bug reported there).
Link: https://bugzilla.kernel.org/show_bug.cgi?id=73141
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
If the console is a PCI device, and we try to print to it while its
decoding is disabled, the system will hang. This particular printk hasn't
caused a problem yet, but it could, so this fixes it.
See also 0ff9514b57 ("PCI: Don't print anything while decoding is
disabled").
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
If a BAR is above 4GB and our dma_addr_t is too small, don't clear the BAR
to zero: that doesn't disable the BAR, and it makes it more likely that the
BAR will conflict with things if we turn on the memory enable bit (as we
will at "out:" if the device was already enabled at the handoff).
We should also print the BAR info and its original size so we can follow
the process when we try to assign space to it.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
If dma_addr_t is too small to represent the BAR value,
pcibios_bus_to_resource() will fail, so just remember the BAR size directly
in the resource. The resource is already marked UNSET, so we know the
address isn't valid anyway.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
We can only handle BARs above 4GB if dma_addr_t (not resource_size_t) is 64
bits wide. If we have a 64-bit resource_size_t and a 32-bit dma_addr_t,
we can't deal with BARs above 4GB.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
We can only handle BARs larger than 4GB if both dma_addr_t and
resource_size_t are 64 bits wide. If dma_addr_t is 32 bits, we can't
represent all the bus addresses, and if resource_size_t is 32 bits, we
can't represent all the CPU addresses.
Previously we cleared res->flags (at "fail:") for resources that were too
large. That means we think the BAR doesn't exist at all, which in turn
means that we could enable the device even though we can't keep track of
where the BAR is and we can't make sure it doesn't overlap something else.
This preserves the type flags (MEM/IO) so we can keep from enabling the
device.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Print the AGP bridge info the same way as the rest of the kernel, e.g.,
"0000:00:04.0" instead of "00:04:00".
Also print the AGP aperture address range the same way we print resources,
and label it explicitly as a bus address range.
No functional change except the message changes.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Replace printk() with pr_info(), pr_err(), etc. Define pr_fmt() to prefix
output with "AGP: ".
No functional change except the addition of "AGP: " prefix in dmesg output.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Move the pcibios_assign_resources() fs_initcall annotation next to the
function definition. No functional change.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Function rtw_drv_init() is written in a way that assumes 'status' != _SUCCESS
as long as not explicitly set. Thus initialize 'status' to FAIL, in order to
prevent undefined behaviour if going through the exit paths. Detected by
Coverity - CID 1077832.
Signed-off-by: Christian Engelmayer <cengelma@gmx.at>
Acked-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fix a potential leak in the error path of rtw_set_key(). In case the requested
algorithm is not supported by the driver, the function returns without
enqueuing or freeing the already allocated command and parameter structs. Use
a centralized exit path and make sure that all memory is freed correctly.
Detected by Coverity - CID 1077716, 1077717.
Signed-off-by: Christian Engelmayer <cengelma@gmx.at>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fix a potential leak in the error path of function update_bcn_wps_ie().
Move the affected input verification to the beginning of the function so
that it may return directly without leaking already allocated memory.
Detected by Coverity - CID 1077718.
Signed-off-by: Christian Engelmayer <cengelma@gmx.at>
Acked-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Both wq_trigger and stream_started are used only to control the em28xx
alsa streaming. They don't belong to em28xx common struct.
Signed-off-by: Frank Schäfer <fschaefer.oss@googlemail.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
Function rtw_mp_pwrtrk() dynamically allocates a temporary buffer that
is not freed in all error paths. Use a centralized exit path and make sure
that all memory is freed correctly. Detected by Coverity - 1077715.
Signed-off-by: Christian Engelmayer <cengelma@gmx.at>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Function rtw_mp_SetRFPath() dynamically allocates a temporary buffer that
is not freed in all error paths. Use a centralized exit path and make sure
that all memory is freed correctly. Detected by Coverity - CID 1077714.
Signed-off-by: Christian Engelmayer <cengelma@gmx.at>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Function rtw_mp_QueryDrv() dynamically allocates a temporary buffer that
is not freed in all error paths. Use a centralized exit path and make sure
that all memory is freed correctly. Detected by Coverity - CID 1077713.
Signed-off-by: Christian Engelmayer <cengelma@gmx.at>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Function rtw_wx_set_enc_ext() dynamically allocates a temporary buffer that
is not freed in all error paths. Use a centralized exit path and make sure
that all memory is freed correctly. Detected by Coverity - CID 1077712.
Signed-off-by: Christian Engelmayer <cengelma@gmx.at>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Function rtw_wx_read32() dynamically allocates a temporary buffer that is not
freed in all error paths. Use a centralized exit path and make sure that all
memory is freed correctly. Detected by Coverity - CID 1077711.
Signed-off-by: Christian Engelmayer <cengelma@gmx.at>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The tuner address is only used by the v4l submodule and at tuner setup and
can be obtained from the board data directly (if specified).
Signed-off-by: Frank Schäfer <fschaefer.oss@googlemail.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
The tda9887 chipset is part of the analog tuner. Move it out of
em28xx-cards.
Also, it is used only one time by the v4l2 sub-module at tuner setup.
With that, we can get rid of an additional data inside the em28xx
common structure.
Signed-off-by: Frank Schäfer <fschaefer.oss@googlemail.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
