Tegra SDHCI controllers, by default, report a base clock frequency of
208Mhz in SDHCI_CAPABILTIES which may or may not be equal to the actual
base clock frequency. This is because the clock rate is configured by
the clock controller, which is external to the SD/MMC controller. Since
the SD/MMC controller has no knowledge of how this clock is configured,
it will simply report the maximum frequency. While the reported value
can be overridden by setting BASE_CLK_FREQ in VENDOR_CLOCK_CTRL on
Tegra30 and later SoCs, just set CAP_CLOCK_BASE_BROKEN and supply
sdhci_pltfm_clk_get_max_clock(), which simply does a clk_get_rate(),
as the get_max_clock() callback.
Signed-off-by: Andrew Bresticker <abrestic@chromium.org>
Tested-by: Stephen Warren <swarren@nvidia.com>
Acked-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Chris Ball <chris@printf.net>
Program TEGRA_SDHCI_VENDOR_MISC_CTRL so that UHS modes aren't advertised
in SDHCI_CAPABILITIES_1. While the Tegra SDHCI controller does support
these modes, they require Tegra-specific tuning and calibration routines
which the driver does not support yet.
Signed-off-by: Andrew Bresticker <abrestic@chromium.org>
Tested-by: Stephen Warren <swarren@nvidia.com>
Acked-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Chris Ball <chris@printf.net>
f8ec589b86 ("mmc: sdhci-dove: allow GPIOs to be used for card detection
on Dove" added a gpio based card detect interrupt handler that was hooked
up into card_tasket.
3560db8e24 ("mmc: sdhci: push card_tasklet into threaded irq handler")
now removed that very card_tasklet causing sdhci-dove to fail on build
with:
drivers/mmc/host/sdhci-dove.c: In function 'sdhci_dove_carddetect_irq':
drivers/mmc/host/sdhci-dove.c:42:24: error: 'struct sdhci_host' has no member named 'card_tasklet'
To fix both the build error and get a working gpio card detection without
card_tasklet, replace sdhci_get_of_property() with more recent
mmc_of_parse(). It takes care of gpio-based card detect passed through DT
already and allows to remove the offending code sections dealing with
removed card_tasklet.
Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Chris Ball <chris@printf.net>
Fix sparse warnings by adding __user and __iomem annotations where
necessary and removing certain unnecessary casts. While at it,
also use u32 in place of __u32.
Signed-off-by: Tuomas Tynkkynen <tuomas.tynkkynen@iki.fi>
Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Commit fd8e198cfc ("Documentation: gpiolib: document new interface")
moved Documentation/gpio.txt to Documentation/gpio/gpio-legacy.txt and added
new documents for descriptor-based interface so fix the the location here to
point Documentation/gpio/ since that what commit ccb6fbb990
("Documentation / ACPI: update to GPIO descriptor API") was looking for.
Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Removal of null pointer checks that could never happen
Signed-off-by: Rickard Strandqvist <rickard_strandqvist@spectrumdigital.se>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Export of symbols statement must be placed right after the definition to meet
kernel coding style guidelines. This issue was reported by checkpatch.
A simplified version of the semantic patch that makes this change is as
follows (http://coccinelle.lip6.fr/):
// <smpl>
@ r @ identifier f; @@
- EXPORT_SYMBOL(f);
@@ identifier r.f; @@
f(...) { ... }
+ EXPORT_SYMBOL(f);
// </smpl>
Signed-off-by: Benoit Taine <benoit.taine@lip6.fr>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The GPIO operation region handler should be called where sleep is
allowed, so we should use the *_cansleep version of gpiod_get/set APIs
or we will get a warning message complaining invalid context if the GPIO
chip has the cansleep flag set.
Signed-off-by: Aaron Lu <aaron.lu@intel.com>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Acked-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
This patch remove variables that are initialized with a constant,
are never updated, and are only used as parameter of return.
Return the constant instead of using a variable.
Verified by compilation only.
The coccinelle script that find and fixes this issue is:
// <smpl>
@@
type T;
constant C;
identifier ret;
@@
- T ret = C;
... when != ret
- return ret;
+ return C;
// </smpl>
Signed-off-by: Peter Senna Tschudin <peter.senna@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
bDiversityRegCtlON is always false.
In later vendor driver code has been commented out.
Remove diversity timers and variables.
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Functions are now dead and of no use.
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Replace with ether_crc_le which gives the same result.
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
CRCdwGetCrc32 is a bitwise not of ether_crc_le.
Replace with ether_crc_le.
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This makes sure the cfg->name can never accidentally be processed as a
format string in the worker thread name.
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This commit fixes the following sparse warnings:
drivers/staging/rtl8821ae/rtl8821ae/sw.c:
- 48:6: warning: symbol 'rtl8821ae_init_aspm_vars' was not declared.
Should it be static?
- 228:5: warning: symbol 'rtl8812ae_rx_command_packet_handler' was
not declared. Should it be static?
- 263:20: warning: symbol 'rtl8821ae_hal_ops' was not declared.
Should it be static?
- 314:23: warning: symbol 'rtl8821ae_mod_params' was not declared.
Should it be static?
- 321:20: warning: symbol 'rtl8821ae_hal_cfg' was not declared.
Should it be static?
All of this symbols are local, that is there are no references to them
in the other files from this driver.
Signed-off-by: Konrad Zapalowicz <bergo.torino@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* Move Check_D_MediaFmt() implementation up in smilmain.c to keep all the
non-static functions at the top of the file;
* Remove unnecessary extern and newlines from "init.h";
Signed-off-by: Tair Rzayev <tair.rzayev@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
gpiolib will require all gpio drivers to expicitly set the request
function pointer in the future. To encourage gpio driver developers
to adhere to this standard gpio-generic.c now sets this function
pointer.
Signed-off-by: Anthony Fee <anthony.fee@emutex.com>
Acked-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
This function is already compliant with the comedi API and is behaving as
comedi core expects. This patch moves it out of
addi-data/hwdrv_apci1564.c and into the driver proper since no further
work needs to be done on it.
Signed-off-by: Chase Southwood <chase.southwood@gmail.com>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This function is already compliant with the comedi API and is behaving as
comedi core expects. This patch moves it out of
addi-data/hwdrv_apci1564.c and into the driver proper since no further
work needs to be done on it.
Signed-off-by: Chase Southwood <chase.southwood@gmail.com>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This is a patch to fix the warnings shown by checkpatch tool on
file cb_das16_cs.c
Signed-off-by: Raghavendra Chandra Ganiga <ravi23ganiga@gmail.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This is a patch to remove warnings reported by checkpatch tool on
comedi_test.c file
Signed-off-by: Raghavendra Chandra Ganiga <ravi23ganiga@gmail.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Remove cases where useless bare return is left at end of function.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Tested-by: Kavindya Deegala <kavindya.s.deegala@intel.com>
Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Remove useless return statements for void functions which do not need
it.
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
This semicomplex switch-case has various fallthrough portions, that were
not indicated by a /* fallthrough */ comment.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
This patch cleans up a checkpatch.pl style warning in the ixgbe code.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
The debugfs_remove_recursive function is NULL-safe, so we don't need to
check here ourselves.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
This commit fixes a checkpatch.pl warning for style, by adding braces
around the else block, since the if block requires braces.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
This patch fixes various log strings that are split over multiple lines
in the ixgbe driver. This cleans up checkpatch.pl warnings, and makes it
easier to search the code for warning strings displayed to the kernel
log.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
This driver supports the PCI-20001C-1a and PCI-20001C-2a carrier boards.
The -2a version has 32 on-board DIO channels. In case this variant is
detected, local variable 'has_dio' is set accordingly. Otherwise it is
left uninitialized and the following subdevice instantiation depends on
the stack. Detected by Coverity - CID 1077830.
Signed-off-by: Christian Engelmayer <cengelma@gmx.at>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This driver only supports a single board type. Remove the boardinfo and
its use in the driver.
Signed-off-by: Chase Southwood <chase.southwood@gmail.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The only board served by this driver always has a timer, so we can init
the timer subdevice without checking first.
The boardinfo about the timer can also be removed and the data used
directly.
Signed-off-by: Chase Southwood <chase.southwood@gmail.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch fixes checkpatch warnings in ixgbe, by adding a blank line
between declaration and code blocks.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
The `async` member of `struct comedi_subdevice` may point to a `struct
comedi_async` or may be NULL. The `subdevice` member of `struct
comedi_async` points back to the `struct comedi_subdevice` associated
with it in a one-to-one relationship.
All uses of the `subdevice` member of `struct comedi_async` apart from
its initialization have now been removed (by passing around a pointer to
the subdevice instead of to the "async" structure), so get rid of it.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
`mite_sync_output_dma()` in the "mite" module currently takes a pointer
to a `struct comedi_async` and gets a pointer to the owning `struct
comedi_subdevice` from the `subdevice` member. Change it to take a
pointer to a `struct comedi_subdevice` and use the `async` member.
The motivation for this is to eliminate the `subdevice` member of
`struct comedi_async`.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
`mite_sync_input_dma()` in the "mite" module currently takes a pointer
to a `struct comedi_async` and gets a pointer to the owning `struct
comedi_subdevice` from the `subdevice` member. Change it to take a
pointer to a `struct comedi_subdevice` and use the `async` member.
The motivation for this is to eliminate the `subdevice` member of
`struct comedi_async`.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
`mite_buf_change()` in the "mite" module currently takes a pointer to a
`struct comedi_async` and gets a pointer to the owning `struct
comedi_subdevice` from the `subdevice` member. Change it to take a
pointer to a `struct comedi_subdevice` and use the `async` member.
The motivation for this is to eliminate the `subdevice` member of
`struct comedi_async`.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Local function `comedi_buf_write_n_available()` currently takes a
pointer to a `struct comedi_async`. Change it to take a pointer to a
`struct comedi_subdevice` and use the `async` member for consistency
with the other comedi buffer handling functions.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Local function `__comedi_buf_write_alloc()` is called by
`comedi_buf_write_alloc()` and `comedi_buf_put()`. It currently takes a
pointer to a `struct comedi_async`. Change it to take a pointer to a
`struct comedi_subdevice` and use the `async` member for consistency
with other comedi buffer handling functions.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Local function `comedi_buf_munge()` is called by
`comedi_buf_write_free()` to modify (or "munge") the data copied from
a device into the buffer.
Currently, the function takes a pointer to a `struct comedi_async` and
gets a pointer to the comedi subdevice from the `subdevice` member.
Change it to take a pointer to a `struct comedi_subdevice` and get a
pointer to the "async" structure from the `async` member.
The main motivation for this is to elimate the `subdevice` member of
`struct comedi_async`.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Change the parameters of `comedi_buf_is_mmapped()` to pass a pointer to
the comedi subdevice instead of a pointer to the "async" structure
belonging to the subdevice.
The main aim at the moment is to replace all the `struct comedi_async *`
parameters with `struct comedi_subdevice *` parameters in the comedi
driver API.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Change the parameters of `comedi_buf_reset()` to pass a pointer to the
comedi subdevice instead of a pointer to the "async" structure belonging
to the subdevice.
The main aim at the moment is to replace all the `struct comedi_async *`
parameters with `struct comedi_subdevice *` parameters in the comedi
driver API.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Change the parameters of `comedi_buf_read_n_available()` to pass a
pointer to the comedi subdevice instead of a pointer to the "async"
structure belonging to the subdevice.
The main aim at the moment is to replace all the `struct comedi_async *`
parameters with `struct comedi_subdevice *` parameters in the comedi
driver API.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Change the parameters of `comedi_buf_read_free()` to pass a pointer to
the comedi subdevice instead of a pointer to the "async" structure
belonging to the subdevice.
The main aim at the moment is to replace all the `struct comedi_async *`
parameters with `struct comedi_subdevice *` parameters in the comedi
driver API.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Change the parameters of `comedi_buf_read_alloc()` to pass a pointer to
the comedi subdevice instead of a pointer to the "async" structure
belonging to the subdevice.
The main aim at the moment is to replace all the `struct comedi_async *`
parameters with `struct comedi_subdevice *` parameters in the comedi
driver API.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
