The analog-loopback causes the speaker noises even if it's set to zero
volume. As a simple workaround, just get rid of the loopback mixer.
Bugzilla: https://bugzilla.novell.com/show_bug.cgi?id=873704
Signed-off-by: Takashi Iwai <tiwai@suse.de>
On some architectures, this header must be explicitly included.
Change-ID: I4bc2eb0531956a7b676489f79d347d55cfe12421
Signed-off-by: Mitch Williams <mitch.a.williams@intel.com>
Tested-by: Kavindya Deegala <kavindya.s.deegala@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Pull scsi target fixes from Nicholas Bellinger:
"This series include:
- Close race between iser-target network portal shutdown + accepting
new connection logins (sagi)
- Fix free-after-use regression in tcm_fc post conversion to
percpu-ida pre-allocation (nab)
- Explicitly disable Immediate + Unsolicited Data for iser-target
connections when T10-PI is enabled (sagi + nab)
- Allow pi_prot_type + emulate_write_cache attributes to be set to
zero regardless of backend support (andy)
- memory leak fix (mikulas)"
* git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending:
target: fix memory leak on XCOPY
target: Don't allow setting WC emulation if device doesn't support
iscsi-target: Disable Immediate + Unsolicited Data with ISER Protection
tcm_fc: Fix free-after-use regression in ft_free_cmd
iscsi-target: Change BUG_ON to REJECT in iscsit_process_nop_out
Target/iscsi,iser: Avoid accepting transport connections during stop stage
Target/iser: Fix iscsit_accept_np and rdma_cm racy flow
Target/iser: Fix wrong connection requests list addition
target: Allow non-supporting backends to set pi_prot_type to 0
Disable the AA-loopback path to get rid of the constant white noise
that can be heard when headphones are used.
Signed-off-by: Gabriele Mazzotta <gabriele.mzt@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
- ACPICA fix for a stale pointer access introduced by a recent
commit in the XSDT validation code from Lv Zheng.
- ACPICA fix for the default value of the command line switch
to favor 32-bit FADT addresses (in case there's a conflict
between a 64-bit and a 32-bit address). The previous default
was that the 32-bit version would take precedence and we tried
to change it to the other way around and it didn't work.
From Lv Zheng.
- A TPM commit related to ACPI _DSM in 3.14 caused the driver to
refuse to load if a specific _DSM was missing and that broke
resume from system suspend on Chromebooks that require the TPM
hardware to be restored to a working state during resume by the
OS. Restore the old behavior to load the driver if the _DSM
in question is not present, but prevent it from using the
feature the _DSM is for.
- ACPI AC driver conversion in 3.13 broke thermal management on
at least one machine and has to be reverted. From Guenter Roeck.
- Two reverts of 3.13 commits that attempted to remove the old ACPI
battery interface in /proc, but turned out to break some utilities
still using that interface. From Lan Tianyu.
- ACPI processor driver fix to prevent acpi_processor_add() from
modifying the CPU device's .offline field which leads to breakage
if the initial online of the CPU fails. From Igor Mammedov.
- Two intel_pstate fixes, one to take a BayTrail documentation update
into account and one to avoid forcing the maximum P-state on init
which causes CPU PM trouble on systems with P-states coordination
when one of the CPU cores is initialized after an offline/online
cycle triggered by user space. Both stable candidates, from
Dirk Brandewie.
- Fix for the ACPI video DMI blacklist entry for Dell Inspiron 7520
from Aaron Lu.
- Two new ACPI video blacklist entries for machines shipping with
Win8 that need to use native backlight so that it can be controlled
in a usual way (which doesn't work otherwise due bugs in the ACPI
tables) from Hans de Goede.
- Two ACPI _OSI quirks for systems that need them to work correctly
with Linux from Edward Lin and Hans de Goede.
/
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)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=v+oA
-----END PGP SIGNATURE-----
Merge tag 'pm+acpi-3.15-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI and power management fixes from Rafael Wysocki:
"Still fixing regressions (partly by reverting commits that broke
things for people), fixing other stable-candidate bugs and adding some
blacklist entries for ACPI video and _OSI.
Two ACPICA regression fixes (one recent and one for a 3.14 commit), a
fix for an ACPI-related regression in TPM (introduced in 3.14), a
revert of the ACPI AC driver conversion in 3.13 that went wrong for an
unknown reason, two reverts of commits that attempted to remove an old
user space interface in /proc and broke some utilities, in 3.13 too, a
fix for a CPU hotplug bug in the ACPI processor driver (stable
material), two (stable candidate) fixes for intel_pstate and a few new
blacklist entries, mostly for systems that shipped with Windows 8.
Specifics:
- ACPICA fix for a stale pointer access introduced by a recent commit
in the XSDT validation code from Lv Zheng.
- ACPICA fix for the default value of the command line switch to
favor 32-bit FADT addresses (in case there's a conflict between a
64-bit and a 32-bit address). The previous default was that the
32-bit version would take precedence and we tried to change it to
the other way around and it didn't work. From Lv Zheng.
- A TPM commit related to ACPI _DSM in 3.14 caused the driver to
refuse to load if a specific _DSM was missing and that broke resume
from system suspend on Chromebooks that require the TPM hardware to
be restored to a working state during resume by the OS. Restore
the old behavior to load the driver if the _DSM in question is not
present, but prevent it from using the feature the _DSM is for.
- ACPI AC driver conversion in 3.13 broke thermal management on at
least one machine and has to be reverted. From Guenter Roeck.
- Two reverts of 3.13 commits that attempted to remove the old ACPI
battery interface in /proc, but turned out to break some utilities
still using that interface. From Lan Tianyu.
- ACPI processor driver fix to prevent acpi_processor_add() from
modifying the CPU device's .offline field which leads to breakage
if the initial online of the CPU fails. From Igor Mammedov.
- Two intel_pstate fixes, one to take a BayTrail documentation update
into account and one to avoid forcing the maximum P-state on init
which causes CPU PM trouble on systems with P-states coordination
when one of the CPU cores is initialized after an offline/online
cycle triggered by user space. Both stable candidates, from Dirk
Brandewie.
- Fix for the ACPI video DMI blacklist entry for Dell Inspiron 7520
from Aaron Lu.
- Two new ACPI video blacklist entries for machines shipping with
Win8 that need to use native backlight so that it can be controlled
in a usual way (which doesn't work otherwise due bugs in the ACPI
tables) from Hans de Goede.
- Two ACPI _OSI quirks for systems that need them to work correctly
with Linux from Edward Lin and Hans de Goede"
* tag 'pm+acpi-3.15-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPI / video: Revert native brightness quirk for ThinkPad T530
intel_pstate: remove setting P state to MAX on init
ACPICA: Tables: Restore old behavor to favor 32-bit FADT addresses.
ACPI / video: correct DMI tag for Dell Inspiron 7520
intel_pstate: Set turbo VID for BayTrail
ACPI / TPM: Fix resume regression on Chromebooks
ACPI / proc: Do not say when /proc interfaces will be deleted in Kconfig
ACPI / processor: do not mark present at boot but not onlined CPU as onlined
ACPI: Revert "ACPI / AC: convert ACPI ac driver to platform bus"
ACPI / blacklist: Add dmi_enable_osi_linux quirk for Asus EEE PC 1015PX
ACPI: blacklist win8 OSI for Dell Inspiron 7737
ACPI / video: Add use_native_backlight quirks for more systems
ACPI: Revert "ACPI / Battery: Remove battery's proc directory"
ACPI: Revert "ACPI: Remove CONFIG_ACPI_PROCFS_POWER and cm_sbsc.c"
ACPICA: Tables: Fix invalid pointer accesses in acpi_tb_parse_root_table().
data to a mempool allocation (which offers allocation with cpu locality,
and there is no inter-cpu communication on slab allocation).
A couple dm-thinp stable fixes to address "out-of-data-space" issues.
A dm-multipath fix for a LOCKDEP warning introduced in 3.15-rc1.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJTdiI7AAoJEMUj8QotnQNa1fMIAOSGppH4U/VuT1+UMDyabUba
eXsK8xBUTIDSBuTJ+ljkE5fyvXpn/wvA+b1hTKLhzVkUZ1pCY4pIw1pwpVcw89Bb
BhktFWRYvcv/MAARDHiMGW5yc6xP319Qm04XN3xbMHx71gxGRwpzb191LSO5S2VR
0rjXvZZt7WPJe/QPOFUrqyoP7t59LH9hu2/OH/Ic9o5/D0WxbqPEP6X8iJyIs32u
lNvIQ5r5f3xNzt0VDvEq3sxR3qYhQvLPDMdp0YR67c87fKfsKQj4pkvXltXhY5bM
wBHFE+NBl6MPzTXNCT9i+p360GXE7B/lY9boochAyE/UEztRq1+oqJOa/dDaBCo=
=0vk2
-----END PGP SIGNATURE-----
Merge tag 'dm-3.15-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm
Pull device mapper fixes from Mike Snitzer:
"A dm-crypt fix for a cpu hotplug crash that switches from using
per-cpu data to a mempool allocation (which offers allocation with cpu
locality, and there is no inter-cpu communication on slab allocation).
A couple dm-thinp stable fixes to address "out-of-data-space" issues.
A dm-multipath fix for a LOCKDEP warning introduced in 3.15-rc1"
* tag 'dm-3.15-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm:
dm mpath: fix lock order inconsistency in multipath_ioctl
dm thin: add timeout to stop out-of-data-space mode holding IO forever
dm thin: allow metadata commit if pool is in PM_OUT_OF_DATA_SPACE mode
dm crypt: fix cpu hotplug crash by removing per-cpu structure
This branch contains bug fixes important to get into v3.15. There is a
fix for modifying properties seen during early boot, a fix for an
incorrect prototype when CONFIG_OF=n, and a couple of corrections to
device tree memory nodes on a few platforms.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=kY49
-----END PGP SIGNATURE-----
Merge tag 'dt-for-linus' of git://git.secretlab.ca/git/linux
Pull device tree fixes from Grant Likely:
"Drivercore bugfixes for v3.15
This branch contains bug fixes important to get into v3.15. There is
a fix for modifying properties seen during early boot, a fix for an
incorrect prototype when CONFIG_OF=n, and a couple of corrections to
device tree memory nodes on a few platforms"
* tag 'dt-for-linus' of git://git.secretlab.ca/git/linux:
mips: dts: Fix missing device_type="memory" property in memory nodes
arm: dts: Fix missing device_type="memory" for ste-ccu8540
of: fix CONFIG_OF=n prototype of of_node_full_name()
of: make of_update_property() usable earlier in the boot process
Adding the appropriate GNU General Public License header and
update copyright year to 2014.
Change-ID: I769dd2d37d70350afd0c8727ae2859c0fd340361
Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Signed-off-by: Catherine Sullivan <catherine.sullivan@intel.com>
Tested-by: Sibai Li <sibai.li@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Remove the defines for PCI bus info that are never used.
Signed-off-by: Catherine Sullivan <catherine.sullivan@intel.com>
Tested-by: Sibai Li <sibai.li@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Minor changes to the AdminQ interface to bring it up-to-date.
Change-ID: Ie31a4cc4911b2d9d3b7f9af2e56fb0ae674f6345
Signed-off-by: Shannon Nelson <shannon.nelson@intel.com>
Signed-off-by: Kevin Scott <kevin.c.scott@intel.com>
Tested-by: Sibai Li <sibai.li@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
journal_init_revoke_table is only called with positive hash_size
(JOURNAL_REVOKE_DEFAULT_HASH) so we can replace loop shift by ilog2
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Jan Kara <jack@suse.cz>
Cc: Joe Perches <joe@perches.com>
Signed-off-by: Fabian Frederick <fabf@skynet.be>
Signed-off-by: Jan Kara <jack@suse.cz>
A few boards we've seen have a fixed 3V regulator. Add this one on the common
DTSI.
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
All of the .queue_flip() callbacks duplicate the same code to pin the
buffers and calculate the gtt_offset. Move that code to
intel_crtc_page_flip(). In order to do that we must also move the ring
selection logic there.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Now that we've plugged the mmio vs. ring flip race, we shouldn't need
these vblank waits in the modeset codepaths anymore. So get rid of
them.
v2: gen2 needs to wait for planes to turn off before disabling pipe
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Now that the vblank wait is gone from intel_enable_primary_plane(),
hsw_enable_ips() needs to do the vblank wait itself.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Starting from ILK, mmio flips also cause a flip done interrupt to be
signalled. This means if we first do a set_base and follow it
immediately with the CS flip, we might mistake the flip done interrupt
caused by the set_base as the flip done interrupt caused by the CS
flip.
The hardware has a flip counter which increments every time a mmio or
CS flip is issued. It basically counts the number of DSPSURF register
writes. This means we can sample the counter before we put the CS
flip into the ring, and then when we get a flip done interrupt we can
check whether the CS flip has actually performed the surface address
update, or if the interrupt was caused by a previous but yet
unfinished mmio flip.
Even with the flip counter we still have a race condition of the CS flip
base address update happens after the mmio flip done interrupt was
raised but not yet processed by the driver. When the interrupt is
eventually processed, the flip counter will already indicate that the
CS flip has been executed, but it would not actually complete until the
next start of vblank. We can use the DSPSURFLIVE register to check
whether the hardware is actually scanning out of the buffer we expect,
or if we managed hit this race window.
This covers all the cases where the CS flip actually changes the base
address. If the base address remains unchanged, we might still complete
the CS flip before it has actually completed. But since the address
didn't change anyway, the premature flip completion can't result in
userspace overwriting data that's still being scanned out.
CTG already has the flip counter and DSPSURFLIVE registers, and
although the flip done interrupt is still limited to CS flips alone,
the code now also checks the flip counter on CTG as well.
v2: s/dspsurf/gtt_offset/ (Chris)
Testcase: igt/kms_mmio_vs_cs_flip/setcrtc_vs_cs_flip
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=73027
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@gmail.com>
[danvet: Add g4x_ prefix to flip_count_after_eq.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Otherwise every "indoor" setting by usermode will cause a regdomain reset.
Acked-by: Luis R. Rodriguez <mcgrof@suse.com>
Signed-off-by: Arik Nemtsov <arikx.nemtsov@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Implement and export the new cfg80211_get_station() API.
This utility can be used by other kernel modules to obtain
detailed information about a given wireless station.
It will be in particular useful to batman-adv which will
implement a wireless rate based metric.
Signed-off-by: Antonio Quartulli <antonio@open-mesh.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Add get_expected_throughput() API to mac80211 so that each
driver can implement its own version based on the RC
algorithm they are using (might be using an HW RC algo).
The API returns a value expressed in Kbps.
Also, add the new get_expected_throughput() member
to the rate_control_ops structure in order to be
able to query the RC algorithm (this patch provides an
implementation of this API for both minstrel and
minstrel_ht).
The related member in the station_info object is now
filled accordingly when dumping a station.
Cc: Felix Fietkau <nbd@openwrt.org>
Signed-off-by: Antonio Quartulli <antonio@open-mesh.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Most archs with HAVE_ARCH_CALLER_ADDR have pretty much the same
definitions of CALLER_ADDRx(n). Instead of duplicating the code for all
the archs, define a ftrace_return_address0() and
ftrace_return_address(n) that can be overwritten by the archs if they
need to do something different. Instead of 7 macros in every arch, we
now only have at most 2 (and actually only 1 as
ftrace_return_address0() should be the same for all archs).
The CALLER_ADDRx(n) will now be defined in linux/ftrace.h and use the
ftrace_return_address*(n?) macros. This removes a lot of the duplicate
code.
Link: http://lkml.kernel.org/p/1400585464-30333-1-git-send-email-takahiro.akashi@linaro.org
Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Add period and polarity members to struct pwm_lookup so that platforms
using the lookup table can be treated the same way as those using the
device tree.
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
We really just want to go detect displays again and fire off a hotplug
event if things have changed, not go through full hotplug processing.
Requested-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
As remarked by Christopher R. Baker in his post at
http://marc.info/?l=linux-can&m=139707295706465&w=2
there's a possibility for an use after free condition at device removal.
This simplified patch introduces an additional variable to prevent the issue.
Thanks for catching this.
Cc: linux-stable <stable@vger.kernel.org>
Reported-by: Christopher R. Baker <cbaker@rec.ri.cmu.edu>
Signed-off-by: Stephane Grosjean <s.grosjean@peak-system.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
The sa11x0_dma_pm_ops unconditionally reference sa11x0_dma_resume
and sa11x0_dma_suspend, which currently breaks if CONFIG_PM_SLEEP
is disabled.
There is probably a better way to remove the reference in this
case, but the safe choice is to have the suspend/resume code always
built in the driver.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: dmaengine@vger.kernel.org
Cc: Vinod Koul <vinod.koul@intel.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
It is not possible to reference the omap_dma_filter_fn filter
function from a built-in driver if the dmaengine driver itself
is a loadable module, which is a valid configuration otherwise.
This provides only the dummy alternative if the function
is referenced by a built-in driver to allow a successful
build. The filter function is only required by ATAGS based
platforms, which will continue to be broken after this change
for the bogus configuration. When booting from DT, with the
dma channels correctly listed there, it will work fine.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Tony Lindgren <tony@atomide.com>
Cc: Russell King <rmk+kernel@arm.linux.org.uk>
Cc: Vinod Koul <vinod.koul@intel.com>
Cc: dmaengine@vger.kernel.org
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
We need to initialize the fallback device to have a correct mtu
set on this device. Otherwise the mtu is set to null and the device
is unusable.
Fixes: fd58156e45 ("IPIP: Use ip-tunneling code.")
Cc: Pravin B Shelar <pshelar@nicira.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iEYEABECAAYFAlN5tPcACgkQjTAFq1RaXHPSsgCgltm13xcL165QR6A1uKw+r37h
Dt0AnAuJNFvks5HiYZSdGa9GRreoF+uG
=qgHD
-----END PGP SIGNATURE-----
Merge tag 'linux-can-next-for-3.16-20140519' of git://gitorious.org/linux-can/linux-can-next
Marc Kleine-Budde says:
====================
pull-request: can-next 2014-05-19
this is a pull request of 13 patches for net-next/master.
A patch by Dan Carpenter fixes a coccinelle warning in the mcp251x
driver. Jean Delvare contributes three patches to tightening the
Kconfig dependencies for some drivers. Then come three patches by Pavel
Machek that improve the c_can driver support on the socfpga platform.
Sergei Shtylyov's patch brings support for the CAN hardware found on
Renesas R-Car CAN controllers. Four patches by Oliver Hartkopp, the
first cleans up the guard macros in the CAN headers the other three
improve the EFF frame filtering. Maximilian Schneider's patch adds
support for the GS_USB CAN devices.
Signed-off-by: David S. Miller <davem@davemloft.net>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iEYEABECAAYFAlN5r54ACgkQjTAFq1RaXHMB4ACbBiaiexMd4I86W/dClGc+XGkl
ilMAnRjiukvQJyNjpM8oZ+7eAGMy5MSX
=vR48
-----END PGP SIGNATURE-----
Merge tag 'linux-can-fixes-for-3.15-20140519' of git://gitorious.org/linux-can/linux-can
Marc Kleine-Budde says:
====================
pull-request: can 2014-05-19
this is a pull request for net/master, for the v3.15 release cycle,
with a single patch.
Oliver Hartkopp's patch removes a Kconfig option in the c_can driver,
which was added as a workaround during the v3.15 development. With all
cleanup patches this workaround is not needed anymore.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
The upper timer_interval limit is arbitrary and much higher
than anything usable in the real world. Reducing it from 15s
to ~4s to make the timer_interval fit in an u32 does not make
much difference. The limit is still outside the practical
bounds.
This eliminates the need for a 64bit timer_interval, fixing a
build error related to 64bit division:
drivers/built-in.o: In function `cdc_ncm_get_coalesce':
ak8975.c:(.text+0x1ac994): undefined reference to `__aeabi_uldivmod'
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Bjørn Mork <bjorn@mork.no>
Signed-off-by: David S. Miller <davem@davemloft.net>
Don't use DEFINE_PCI_DEVICE_TABLE macro, because this macro
is deprecated.
Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Pablo Neira Ayuso says:
====================
Netfilter/nftables fixes for net
The following patchset contains nftables fixes for your net tree, they
are:
1) Fix crash when using the goto action in a rule by making sure that
we always fall back on the base chain. Otherwise, this may try to
access the counter memory area of non-base chains, which does not
exists.
2) Fix several aspects of the rule tracing that are currently broken:
* Reset rule number counter after goto/jump action, otherwise the
tracing reports a bogus rule number.
* Fix tracing of the goto action.
* Fix bogus rule number counter after goto.
* Fix missing return trace after finishing the walk through the
non-base chain.
* Fix missing trace when matching non-terminal rule.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
In the function-graph tracer, add a funcgraph_tail option
to print the function name on all } lines, not just
functions whose first line is no longer in the trace
buffer.
If a function calls other traced functions, its total
time appears on its } line. This change allows grep
to be used to determine the function for which the
line corresponds.
Update Documentation/trace/ftrace.txt to describe
this new option.
Link: http://lkml.kernel.org/p/20140520221041.8359.6782.stgit@beardog.cce.hp.com
Signed-off-by: Robert Elliott <elliott@hp.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Eliminate duplicate TRACE_GRAPH_PRINT_xx defines
in trace_functions_graph.c that are already in
trace.h.
Add TRACE_GRAPH_PRINT_IRQS to trace.h, which is
the only one that is missing.
Link: http://lkml.kernel.org/p/20140520221031.8359.24733.stgit@beardog.cce.hp.com
Signed-off-by: Robert Elliott <elliott@hp.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Add a cmdline param which disables the microcode loader. This is useful
mostly in debugging situations where we want to turn off microcode
loading, both early from the initrd and late, as a means to be able to
rule out its influence on the machine.
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: http://lkml.kernel.org/r/1400525957-11525-3-git-send-email-bp@alien8.de
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Carve out early cmdline parsing function into .../lib/cmdline.c so it
can be used by early code in the kernel proper as well.
Adapted from arch/x86/boot/cmdline.c.
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: http://lkml.kernel.org/r/1400525957-11525-2-git-send-email-bp@alien8.de
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Instead of requiring each consumer of the IRQ affinity notifier to have
themselves be explicitly dependent on CONFIG_SMP, make the definition of
struct irq_affinity_notify to exist independently of that config option
and introduce a stub for irq_set_affinity_notifier() under non SMP
configuration.
Fixes: 2eacc23 ("net/mlx4_core: Enforce irq affinity changes
immediatly")
Signed-off-by: Eyal Perry <eyalpe@mellanox.com>
Signed-off-by: Amir Vadai <amirv@mellanox.com>
Cc: Ben Hutchings <bhutchings@solarflare.com>
Cc: Yevgeny Petrilin <yevgenyp@mellanox.com>
Cc: Or Gerlitz <ogerlitz@mellanox.com>
Cc: David S. Miller <davem@davemloft.net>
Link: http://lkml.kernel.org/r/1400597820-30685-1-git-send-email-amirv@mellanox.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Rename a few more variables and structure member names to lower case.
Signed-off-by: Jake Edge <jake@lwn.net>
Acked-by: Jason Cooper <jason@lakedaemon.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
move all threefish block functions to one file, remove unneeded include
Signed-off-by: Jake Edge <jake@lwn.net>
Acked-by: Jason Cooper <jason@lakedaemon.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch add support for BCH16 ecc-scheme in OMAP NAND driver, by extending
following functions:
- omap_enable_hwecc (nand_chip->ecc.hwctl): configure GPMC controller
- omap_calculate_ecc_bch (nand_chip->ecc.calculate): fetch ECC signature from GPMC controller
- omap_elm_correct_data (nand_chip->ecc.correct): detect and correct ECC errors using ELM
(a) BCH16 ecc-scheme can detect and correct 16 bit-flips per 512Bytes of data.
(b) BCH16 ecc-scheme generates 26-bytes of ECC syndrome / 512B.
Due to (b) this scheme can only be used with NAND devices which have enough
OOB to satisfy the relation: "OOBsize per page >= 26 * (page-size / 512)"
Signed-off-by: Pekon Gupta <pekon@ti.com>
Signed-off-by: Brian Norris <computersforpeace@gmail.com>
ELM hardware engine is used to detect ECC errors for BCHx ecc-schemes
(like BCH4/BCH8/BCH16). This patch extends configuration of ELM registers
for adding support of BCH16_HW ecc-scheme.
Signed-off-by: Pekon Gupta <pekon@ti.com>
Signed-off-by: Brian Norris <computersforpeace@gmail.com>
This patch add support for BCH16_ECC in GPMC (controller) driver:
- extends configuration space to include BCH16 registers
- extends parsing of DT binding for selecting BCH16 ecc-scheme
Signed-off-by: Pekon Gupta <pekon@ti.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Brian Norris <computersforpeace@gmail.com>
