Move the primary plane enable/disable to occur atomically with the
sprite update that caused the primary plane visibility to change.
FBC and IPS enable/disable is left to happen well before or after
the primary plane change.
v2: Pass intel_crtc instead of drm_crtc (Daniel)
Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Reviewed-by: Sourab Gupta <sourabgupta@gmail.com>
Reviewed-by: Akash Goel <akash.goels@gmail.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Add a mechanism by which we can evade the leading edge of vblank. This
guarantees that no two sprite register writes will straddle on either
side of the vblank start, and that means all the writes will be latched
together in one atomic operation.
We do the vblank evade by checking the scanline counter, and if it's too
close to the start of vblank (too close has been hardcoded to 100usec
for now), we will wait for the vblank start to pass. In order to
eliminate random delayes from the rest of the system, we operate with
interrupts disabled, except when waiting for the vblank obviously.
Note that we now go digging through pipe_to_crtc_mapping[] in the
vblank interrupt handler, which is a bit dangerous since we set up
interrupts before the crtcs. However in this case since it's the vblank
interrupt, we don't actually unmask it until some piece of code
requests it.
v2: preempt_check_resched() calls after local_irq_enable() (Jesse)
Hook up the vblank irq stuff on BDW as well
v3: Pass intel_crtc instead of drm_crtc (Daniel)
Warn if crtc.mutex isn't locked (Daniel)
Add an explicit compiler barrier and document the barriers (Daniel)
Note the irq vs. modeset setup madness in the commit message (Daniel)
v4: Use prepare_to_wait() & co. directly and eliminate vbl_received
v5: Refactor intel_pipe_handle_vblank() vs. drm_handle_vblank() (Chris)
Check for min/max scanline <= 0 (Chris)
Don't call intel_pipe_update_end() if start failed totally (Chris)
Check that the vblank counters match on both sides of the critical
section (Chris)
v6: Fix atomic update for interlaced modes
v7: Reorder code for better readability (Chris)
v8: Drop preempt_check_resched(). It's not available to modules
anymore and isn't even needed unless we ourselves cause
a wakeup needing reschedule while interrupts are off
Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Reviewed-by: Sourab Gupta <sourabgupta@gmail.com>
Reviewed-by: Akash Goel <akash.goels@gmail.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
We don't catch the case if an unsupported protocol is submitted
to the xfrm6 protocol handlers, this can lead to NULL pointer
dereferences. Fix this by adding the appropriate checks.
Fixes: 7e14ea15 ("xfrm6: Add IPsec protocol multiplexer")
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
If freelist_idx_t is a byte, SLAB_OBJ_MAX_NUM should be 255 not 256, and
likewise if freelist_idx_t is a short, then it should be 65535 not
65536.
This was leading to all kinds of random crashes on sparc64 where
PAGE_SIZE is 8192. One problem shown was that if spinlock debugging was
enabled, we'd get deadlocks in copy_pte_range() or do_wp_page() with the
same cpu already holding a lock it shouldn't hold, or the lock belonging
to a completely unrelated process.
Fixes: a41adfaa23 ("slab: introduce byte sized index for the freelist of a slab")
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Commit a41adfaa23 ("slab: introduce byte sized index for the freelist
of a slab") changes the size of freelist index and also changes
prototype of accessor function to freelist index. And there was a
mistake.
The mistake is that although it changes the size of freelist index
correctly, it changes the size of the index of freelist index
incorrectly. With patch, freelist index can be 1 byte or 2 bytes, that
means that num of object on on a slab can be more than 255. So we need
more than 1 byte for the index to find the index of free object on
freelist. But, above patch makes this index type 1 byte, so slab which
have more than 255 objects cannot work properly and in consequence of
it, the system cannot boot.
This issue was reported by Steven King on m68knommu which would use
2 bytes freelist index:
https://lkml.org/lkml/2014/4/16/433
To fix is easy. To change the type of the index of freelist index on
accessor functions is enough to fix this bug. Although 2 bytes is
enough, I use 4 bytes since it have no bad effect and make things more
easier. This fix was suggested and tested by Steven in his original
report.
Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Reported-and-acked-by: Steven King <sfking@fdwdc.com>
Acked-by: Christoph Lameter <cl@linux.com>
Tested-by: James Hogan <james.hogan@imgtec.com>
Tested-by: David Miller <davem@davemloft.net>
Cc: Pekka Enberg <penberg@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The mpu_clk, main_clk, and dbg_base_clk outputs from the main PLL go through a
pre-divider. Update socfpga.dtsi to represent those dividers for these
clocks.
Re-use the "div-reg" property that was used for the socfpga-gate-clock as this
is the same thing. Also update the documentation.
Signed-off-by: Dinh Nguyen <dinguyen@altera.com>
Add the necessary #reset-cells property to the rst-mgr node and
provide a header-file with all possible resets specified.
Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de>
Signed-off-by: Dinh Nguyen <dinguyen@altera.com>
Instead of having the documentation for the socfpga-reset controller in a
vendor specific directory, move it to the reset folder to all the other
reset drivers.
Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de>
Signed-off-by: Dinh Nguyen <dinguyen@altera.com>
To be able to use the reset-controller framework, the property
#reset-cells
is mandatory.
Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de>
Signed-off-by: Dinh Nguyen <dinguyen@altera.com>
The timers and uart can get their clock frequencies using the common clock
driver.
Reviewed-by: Steffen Trumtrar <s.trumtrar@pengutronix.de>
Signed-off-by: Dinh Nguyen <dinguyen@altera.com>
The Altera Cyclone5 and Arria5 devkit has an EEPROM and a RTC on the
board. This patch adds support for them.
Signed-off-by: Dinh Nguyen <dinguyen@altera.com>
---
v2: Remove LCD as the driver has not been upstreamed.
Convert all socfpga DT files to the dtc preprocessor include syntax.
This allows to include header files in the devicetrees like other
SoC-types already do.
Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de>
Signed-off-by: Dinh Nguyen <dinguyen@altera.com>
The SOCrates has an M41T82M RTC on i2c0. Add it.
Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de>
Signed-off-by: Dinh Nguyen <dinguyen@altera.com>
The SOCrates is a SOCFpga-Cyclone5 based board from EBV.
Add support for it.
Reviewed-by: Pavel Machek <pavel@denx.de>
Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de>
Signed-off-by: Dinh Nguyen <dinguyen@altera.com>
Add both can controllers to the dtsi.
Reviewed-by: Pavel Machek <pavel@denx.de>
Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de>
Signed-off-by: Dinh Nguyen <dinguyen@altera.com>
The first interrupt is not at 180 but 104. Fix it.
Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de>
Signed-off-by: Dinh Nguyen <dinguyen@altera.com>
Commit 4068579e1e ("net: Implmement
RFC 6936 (zero RX csums for UDP/IPv6)") introduced zero checksums
being allowed for IPv6, but in the case that a socket disallows a
zero checksum on RX we need to sock_put.
Signed-off-by: Tom Herbert <therbert@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Replace uses of &__get_cpu_var for address calculation with this_cpu_ptr.
Link: http://lkml.kernel.org/p/alpine.DEB.2.10.1404291415560.18364@gentwo.org
Acked-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Signed-off-by: Christoph Lameter <cl@linux.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Enabling CONFIG_DEBUG_ATOMIC_SLEEP has shown that some rfcomm functions
acquiring spinlocks call sleeping locks further in the chain. Converting
the offending spinlocks into mutexes makes sleeping safe.
Signed-off-by: Libor Pechacek <lpechacek@suse.cz>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Power management code which is only used by
sh7372 (SH-Mobile AP4) based Mackerl board
* Ignore callbacks for subsys generic_pm_domain_data
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.14 (GNU/Linux)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=HscU
-----END PGP SIGNATURE-----
Merge tag 'renesas-soc2-for-v3.16' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/soc
Merge "Second Round of Renesas ARM Based SoC Updates for v3.16" from Simon
Horman:
Power management code which is only used by
sh7372 (SH-Mobile AP4) based Mackerl board
* Ignore callbacks for subsys generic_pm_domain_data
* tag 'renesas-soc2-for-v3.16' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
ARM: shmobile: Ignore callbacks for subsys generic_pm_domain_data
Signed-off-by: Olof Johansson <olof@lixom.net>
This patch adds binding documentation for the Cirrus Logic CS42L56 Low Power Stereo I2C CODEC
Signed-off-by: Brian Austin <brian.austin@cirrus.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
This patch adds support for the Cirrus Logic Low Power Stereo I2C CODEC
Signed-off-by: Brian Austin <brian.austin@cirrus.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
Remove use of property ti,vcc-aux-disable-is-sleep, which does not
exist.
Signed-off-by: Johan Hovold <jhovold@gmail.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
The variable use_gptimer_clksrc is only used by two __init functions,
So we can freely free it after boot.
Signed-off-by: Oussama Ghorbel <ghorbel@pivasoftware.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Here's a redo of the patch [1] that effectively does the same
thing but is the right way to do things by using ENDPROC instead.
The firmware correctly switches to THUMB before entry.
The patch applies ontop of the earlier patch [1].
[1] https://lkml.org/lkml/2014/4/22/1044
Suggested-by: Dave Martin <Dave.Martin@arm.com>
Cc: Dave Martin <Dave.Martin@arm.com>
Cc: Santosh Shilimkar <santosh.shilimkar@ti.com>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Nishanth Menon <nm@ti.com>
Cc: Tony Lindgren <tony@atomide.com>
Signed-off-by: Joel Fernandes <joelf@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
ThinkPad T430: extend the T430s entry to also cover the T430 (note we also
have another entry for T430's with a different DMI_PRODUCT_VERSION).
ThinkPad T430
Reported-and-tested-by: edm <fuffi.il.fuffo@gmail.com>
References: https://bugzilla.kernel.org/show_bug.cgi?id=51231
Thinkpad T530
Reported-and-tested-by: Balint Szigeti <balint.szgt@gmail.com>
References: https://bugzilla.redhat.com/show_bug.cgi?id=1089545
Acer Aspire 5742G
Reported-and-tested-by: AnAkkk <anakin.cs@gmail.com>
References: https://bugzilla.kernel.org/show_bug.cgi?id=35622
Cc: All applicable <stable@vger.kernel.org>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The commit 1e2d9cd and 7d7ee95 remove ACPI Proc Battery
directory and breaks some old userspace tools. This patch
is to revert commit 1e2d9cd.
Fixes: 1e2d9cdfb4 (ACPI / Battery: Remove battery's proc directory)
Cc: 3.13+ <stable@vger.kernel.org> # 3.13+
Signed-off-by: Lan Tianyu <tianyu.lan@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The commit 1e2d9cd and 7d7ee95 remove ACPI Proc Battery
directory and breaks some old userspace tools. This patch
is to revert 7d7ee95.
Fixes: 7d7ee95886 (ACPI: Remove CONFIG_ACPI_PROCFS_POWER and cm_sbsc.c)
Cc: 3.13+ <stable@vger.kernel.org> # 3.13+
Signed-off-by: Lan Tianyu <tianyu.lan@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
If an md array with externally managed metadata (e.g. DDF or IMSM)
is in use, then we should not set safemode==2 at shutdown because:
1/ this is ineffective: user-space need to be involved in any 'safemode' handling,
2/ The safemode management code doesn't cope with safemode==2 on external metadata
and md_check_recover enters an infinite loop.
Even at shutdown, an infinite-looping process can be problematic, so this
could cause shutdown to hang.
Cc: stable@vger.kernel.org (any kernel)
Signed-off-by: NeilBrown <neilb@suse.de>
wait_barrier() includes a counter, so we must call it precisely once
(unless balanced by allow_barrier()) for each request submitted.
Since
commit 20d0189b10
block: Introduce new bio_split()
in 3.14-rc1, we don't call it for the extra requests generated when
we need to split a bio.
When this happens the counter goes negative, any resync/recovery will
never start, and "mdadm --stop" will hang.
Reported-by: Chris Murphy <lists@colorremedies.com>
Fixes: 20d0189b10
Cc: stable@vger.kernel.org (3.14+)
Cc: Kent Overstreet <kmo@daterainc.com>
Signed-off-by: NeilBrown <neilb@suse.de>
This set contains a change to the ABI for the hid-sensors drivers to bring them
in line with the long published documentation. Unfortunately, rather than
reporting true scale and offset values via sysfs they were reporting
some magic numbers that could only be converted to anything useful using
the HID sensors specification. I missed this entirely through the introduction
of a number of drivers, only picking up on it recently. Srinivas has had
user feedback about this as well. The patch set is too large to go as a fix
at this stage in the cycle and is not a regression fix as this was never
right and so will have to wait for the next merge window. Srinivas assures
me that there are relatively few pieces of hardware out there and he has
had a number of people contact him to point out that the drivers did not
obey the ABI. Hence hopefully the fallout of this, if any will be minor.
If we don't fix it now, it will only get worse going forward. There is no
sensible way of maintaining the incorrect ABI as it is simply returning
the wrong values through the standard interfaces.
Non IIO elements
* Introduce devm_kmemdup. Does what it says on the tin.
New drivers:
* hid-sensors rotation devices (output as quaternion)
* Freescale MPL115A2 presure and temperature sensor.
* Melexis mlx90614 contactless infrared sensor.
* Freescale MMA8452Q 3-axis accelerometer.
New functionality:
* Addition of multiple element callback to allow for sysfs interfaces to access
elements such as quaternions which have no useful meaning if all 4 elements
are not presented together. Other future usecases for this include
rotation matrices.
* Support for multiple element buffer entries for exactly the same uses as
the sysfs related elements described above.
* Quaternion support via the quaternion IIO modifier.
* TEMP_AMBIENT and TEMP_OBJECT modifiers to distinguish cases with thermopile
devices.
* hid-sensors gain sysfs access to the sensor readings. Previously these
drivers used the buffered interface only. This change involves some
additional hid-sensors core support to read poll values back from the devices
to allow the drivers to know roughly how long to wait for a result when
polling the sensor. There is also an associated hid-sensors abi to allow
the devices to be turned off between reads and powered up on demand.
Cleanups and fixes
* Hid sensors fix as described above. Result is to make the _scale and _offset
attributes applicable in the same way as for all other IIO drivers.
* Some additional documentation - mostly covering stuff that graduated from
staging without managing to take it's ABI docs with it.
* A series of little tidy ups to the exynos_adc driver that make the code
nicer to read and improve handling of some corner cases.
* A tidy up to mag3110 (logical fix rather than a real one ;). Also enable
user offset calibration for this device.
* Drop some left over IS_ERR() checks from ad799x that snuck through during
the cleanup in the last IIO patch set.
* Fix a naming issue from clashing patches in ak8975 - note the clash only
occured in the last IIO patch set, hence the fix needs to go through this
tree.
* A format string missmatch fix in ad7280.c. Unlikely to have ever had an
impact so not worth rushing through.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)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=ghZG
-----END PGP SIGNATURE-----
Merge tag 'iio-for-3.16b' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-next
Jonathan writes:
Second set of IIO new drivers, cleanups and functionality for the 3.16 cycle.
This set contains a change to the ABI for the hid-sensors drivers to bring them
in line with the long published documentation. Unfortunately, rather than
reporting true scale and offset values via sysfs they were reporting
some magic numbers that could only be converted to anything useful using
the HID sensors specification. I missed this entirely through the introduction
of a number of drivers, only picking up on it recently. Srinivas has had
user feedback about this as well. The patch set is too large to go as a fix
at this stage in the cycle and is not a regression fix as this was never
right and so will have to wait for the next merge window. Srinivas assures
me that there are relatively few pieces of hardware out there and he has
had a number of people contact him to point out that the drivers did not
obey the ABI. Hence hopefully the fallout of this, if any will be minor.
If we don't fix it now, it will only get worse going forward. There is no
sensible way of maintaining the incorrect ABI as it is simply returning
the wrong values through the standard interfaces.
Non IIO elements
* Introduce devm_kmemdup. Does what it says on the tin.
New drivers:
* hid-sensors rotation devices (output as quaternion)
* Freescale MPL115A2 presure and temperature sensor.
* Melexis mlx90614 contactless infrared sensor.
* Freescale MMA8452Q 3-axis accelerometer.
New functionality:
* Addition of multiple element callback to allow for sysfs interfaces to access
elements such as quaternions which have no useful meaning if all 4 elements
are not presented together. Other future usecases for this include
rotation matrices.
* Support for multiple element buffer entries for exactly the same uses as
the sysfs related elements described above.
* Quaternion support via the quaternion IIO modifier.
* TEMP_AMBIENT and TEMP_OBJECT modifiers to distinguish cases with thermopile
devices.
* hid-sensors gain sysfs access to the sensor readings. Previously these
drivers used the buffered interface only. This change involves some
additional hid-sensors core support to read poll values back from the devices
to allow the drivers to know roughly how long to wait for a result when
polling the sensor. There is also an associated hid-sensors abi to allow
the devices to be turned off between reads and powered up on demand.
Cleanups and fixes
* Hid sensors fix as described above. Result is to make the _scale and _offset
attributes applicable in the same way as for all other IIO drivers.
* Some additional documentation - mostly covering stuff that graduated from
staging without managing to take it's ABI docs with it.
* A series of little tidy ups to the exynos_adc driver that make the code
nicer to read and improve handling of some corner cases.
* A tidy up to mag3110 (logical fix rather than a real one ;). Also enable
user offset calibration for this device.
* Drop some left over IS_ERR() checks from ad799x that snuck through during
the cleanup in the last IIO patch set.
* Fix a naming issue from clashing patches in ak8975 - note the clash only
occured in the last IIO patch set, hence the fix needs to go through this
tree.
* A format string missmatch fix in ad7280.c. Unlikely to have ever had an
impact so not worth rushing through.
Linux XSDT validation mechanism backport has introduced a regreession:
Commit: 671cc68dc6
Subject: ACPICA: Back port and refine validation of the XSDT root table.
There is a pointer still accessed after unmapping.
This patch fixes this issue. Lv Zheng.
Fixes: 671cc68dc6 (ACPICA: Back port and refine validation of the XSDT root table.)
References: https://bugzilla.kernel.org/show_bug.cgi?id=73911
References: https://bugs.archlinux.org/task/39811
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Reported-and-tested-by: Bruce Chiarelli <mano155@gmail.com>
Reported-and-tested-by: Spyros Stathopoulos <spystath@gmail.com>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Cc: 3.14+ <stable@vger.kernel.org> # 3.14+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
As requested by Linus add explicit __visible to the asmlinkage users.
This marks functions visible to assembler.
Tree sweep for rest of tree.
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Link: http://lkml.kernel.org/r/1398984278-29319-4-git-send-email-andi@firstfloor.org
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
As requested by Linus add explicit __visible to the asmlinkage users.
This marks all functions visible to assembler.
Tree sweep for arch/x86/*
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Link: http://lkml.kernel.org/r/1398984278-29319-3-git-send-email-andi@firstfloor.org
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
The sensor hub in Lenovo Yogas needs the enumeration quirk. I've been running
the patch for over a month with no problems, whereas the unpatched drivers
reliably mis-initialized the sensors.
Signed-off-by: Peter F. Patel-Schneider <pfpschneider@gmail.com>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Pull networking fixes from David Miller:
1) e1000e computes header length incorrectly wrt vlans, fix from Vlad
Yasevich.
2) ns_capable() check in sock_diag netlink code, from Andrew
Lutomirski.
3) Fix invalid queue pairs handling in virtio_net, from Amos Kong.
4) Checksum offloading busted in sxgbe driver due to incorrect
descriptor layout, fix from Byungho An.
5) Fix build failure with SMC_DEBUG set to 2 or larger, from Zi Shen
Lim.
6) Fix uninitialized A and X registers in BPF interpreter, from Alexei
Starovoitov.
7) Fix arch dependencies of candence driver.
8) Fix netlink capabilities checking tree-wide, from Eric W Biederman.
9) Don't dump IFLA_VF_PORTS if netlink request didn't ask for it in
IFLA_EXT_MASK, from David Gibson.
10) IPV6 FIB dump restart doesn't handle table changes that happen
meanwhile, causing the code to loop forever or emit dups, fix from
Kumar Sandararajan.
11) Memory leak on VF removal in bnx2x, from Yuval Mintz.
12) Bug fixes for new Altera TSE driver from Vince Bridgers.
13) Fix route lookup key in SCTP, from Xugeng Zhang.
14) Use BH blocking spinlocks in SLIP, as per a similar fix to CAN/SLCAN
driver. From Oliver Hartkopp.
15) TCP doesn't bump retransmit counters in some code paths, fix from
Eric Dumazet.
16) Clamp delayed_ack in tcp_cubic to prevent theoretical divides by
zero. Fix from Liu Yu.
17) Fix locking imbalance in error paths of HHF packet scheduler, from
John Fastabend.
18) Properly reference the transport module when vsock_core_init() runs,
from Andy King.
19) Fix buffer overflow in cdc_ncm driver, from Bjørn Mork.
20) IP_ECN_decapsulate() doesn't see a correct SKB network header in
ip_tunnel_rcv(), fix from Ying Cai.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (132 commits)
net: macb: Fix race between HW and driver
net: macb: Remove 'unlikely' optimization
net: macb: Re-enable RX interrupt only when RX is done
net: macb: Clear interrupt flags
net: macb: Pass same size to DMA_UNMAP as used for DMA_MAP
ip_tunnel: Set network header properly for IP_ECN_decapsulate()
e1000e: Restrict MDIO Slow Mode workaround to relevant parts
e1000e: Fix issue with link flap on 82579
e1000e: Expand workaround for 10Mb HD throughput bug
e1000e: Workaround for dropped packets in Gig/100 speeds on 82579
net/mlx4_core: Don't issue PCIe speed/width checks for VFs
net/mlx4_core: Load the Eth driver first
net/mlx4_core: Fix slave id computation for single port VF
net/mlx4_core: Adjust port number in qp_attach wrapper when detaching
net: cdc_ncm: fix buffer overflow
Altera TSE: ALTERA_TSE should depend on HAS_DMA
vsock: Make transport the proto owner
net: sched: lock imbalance in hhf qdisc
net: mvmdio: Check for a valid interrupt instead of an error
net phy: Check for aneg completion before setting state to PHY_RUNNING
...
This commit implements .determine_rate, so that our factor clocks can be
reparented when needed.
Signed-off-by: Emilio López <emilio@elopez.com.ar>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Mike Turquette <mturquette@linaro.org>
Here are some small fixes and device ids for 3.15-rc4.
All have been in linux-next just fine.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)
iEYEABECAAYFAlNoAMYACgkQMUfUDdst+ymm5QCgzEdgN+YTpuivw63Z/r4ZHGJW
u/QAoLxnz5vjXk9bZDGfnUMEWHrw98Lu
=epx3
-----END PGP SIGNATURE-----
Merge tag 'usb-3.15-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB fixes from Greg KH:
"Here are some small fixes and device ids for 3.15-rc4.
All have been in linux-next just fine"
* tag 'usb-3.15-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
USB: Nokia 5300 should be treated as unusual dev
USB: Nokia 305 should be treated as unusual dev
fsl-usb: do not test for PHY_CLK_VALID bit on controller version 1.6
usb: storage: shuttle_usbat: fix discs being detected twice
usb: qcserial: add a number of Dell devices
USB: OHCI: fix problem with global suspend on ATI controllers
usb: gadget: at91-udc: fix irq and iomem resource retrieval
usb: phy: fsm: change "|" to "||" for condition OTG_STATE_A_WAIT_BCON at statemachine
usb: phy: fsm: update OTG HNP state transition
Here are some tty and serial driver fixes for things reported recently.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)
iEYEABECAAYFAlNn/10ACgkQMUfUDdst+ynKXgCg1BE7sLm2Nmxkm+nfYceWmRG2
pQAAnRnY2wBwtpVa4mVy1ZR3ykiKPvmY
=42O2
-----END PGP SIGNATURE-----
Merge tag 'tty-3.15-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty/serial fixes from Greg KH:
"Here are some tty and serial driver fixes for things reported
recently"
* tag 'tty-3.15-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
tty: Fix lockless tty buffer race
Revert "tty: Fix race condition between __tty_buffer_request_room and flush_to_ldisc"
drivers/tty/hvc: don't free hvc_console_setup after init
n_tty: Fix n_tty_write crash when echoing in raw mode
tty: serial: 8250_core.c Bug fix for Exar chips.
Here are some small IIO driver fixes for 3.15-rc4 that resolve some
reported issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)
iEYEABECAAYFAlNn+48ACgkQMUfUDdst+yn06wCgzKTAHNtiZDir6xddEr4DfkH+
XNsAoLRJAr+w9hdRuA9JcxnQBK1srTvq
=vuRJ
-----END PGP SIGNATURE-----
Merge tag 'staging-3.15-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging
Pull staging / iio fixes from Greg KH:
"Here are some small IIO driver fixes for 3.15-rc4 that resolve some
reported issues"
* tag 'staging-3.15-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
iio: adc: Nothing in ADC should be a bool CONFIG
iio: exynos_adc: use indio_dev->dev structure to handle child nodes
iio:imu:mpu6050: Fixed segfault in Invensens MPU driver due to null dereference
staging:iio:ad2s1200 fix missing parenthesis in a for statment.
The CubieTruck has an AMPAK AP6210 WiFi+Bluetooth module. The WiFi
part is a BCM43362 IC connected to MMC3 in the A20 SoC via SDIO.
The IC also takes a power enable signal via GPIO.
The WiFi module supports out-of-band interrupt signaling via GPIO,
but this is not supported in this patch.
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
arch/x86/crypto/sha1_avx2_x86_64_asm.S introduced _end as a local
symbol, which broke the build under certain circumstances. Although
the wisdom of _end as a local symbol can definitely be questioned, the
build should not break for that reason.
Thus, filter the output of nm to only get global symbols of
appropriate type.
Reported-by: Andy Lutomirski <luto@amacapital.net>
Cc: Chandramouli Narayanan <mouli@linux.intel.com>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
Link: http://lkml.kernel.org/n/tip-uxm3j3w3odglcwhafwq5tjqu@git.kernel.org
Pull Ceph fixes from Sage Weil:
"First, there is a critical fix for the new primary-affinity function
that went into -rc1.
The second batch of patches from Zheng fix a range of problems with
directory fragmentation, readdir, and a few odds and ends for cephfs"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client:
ceph: reserve caps for file layout/lock MDS requests
ceph: avoid releasing caps that are being used
ceph: clear directory's completeness when creating file
libceph: fix non-default values check in apply_primary_affinity()
ceph: use fpos_cmp() to compare dentry positions
ceph: check directory's completeness before emitting directory entry
