The --percentage option is for controlling overhead percentage
displayed. It can only receive either of "relative" or "absolute".
Move the parser callback function into a common location since it's
used by multiple commands now.
For more information, please see previous commit same thing done to
"perf report".
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: http://lkml.kernel.org/r/1397145720-8063-4-git-send-email-namhyung@kernel.org
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
The --percentage option is for controlling overhead percentage
displayed. It can only receive either of "relative" or "absolute".
"relative" means it's relative to filtered entries only so that the
sum of shown entries will be always 100%. "absolute" means it retains
the original value before and after the filter is applied.
$ perf report -s comm
# Overhead Command
# ........ ............
#
74.19% cc1
7.61% gcc
6.11% as
4.35% sh
4.14% make
1.13% fixdep
...
$ perf report -s comm -c cc1,gcc --percentage absolute
# Overhead Command
# ........ ............
#
74.19% cc1
7.61% gcc
$ perf report -s comm -c cc1,gcc --percentage relative
# Overhead Command
# ........ ............
#
90.69% cc1
9.31% gcc
Note that it has zero effect if no filter was applied.
Suggested-by: Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: http://lkml.kernel.org/r/1397145720-8063-3-git-send-email-namhyung@kernel.org
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
When filtering by thread, dso or symbol on TUI it also update total
period so that the output shows different result than no filter - the
percentage changed to relative to filtered entries only. Sometimes
this is not desired since users might expect same results with filter.
So new filtered_* fields to hists->stats to count them separately.
They'll be controlled/used by user later.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: http://lkml.kernel.org/r/1397145720-8063-2-git-send-email-namhyung@kernel.org
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
ffs_epfile_io() is called from userspace, while ffs_func_eps_disable() might be
called from USB disconnect interrupt, the two functions would run in parallel
but they are not well protected, that epfile->ep would be removed by
ffs_func_eps_disable() during ffs_epfile_io() is referring this pointer, then
it leads to kernel PANIC.
The scenario is as below:
Thread 1 Thread 2
| |
SyS_read dwc3_gadget_disconnect_interrupt
| |
ffs_epfile_read reset_config
| |
ffs_epfile_io ffs_func_eps_disable
| |
----- usb_ep_disable(): epfile->ep->ep->desc = NULL
| |
usb_ep_align_maybe(): -----
it refers ep->desc->wMaxPacketSize -----
Signed-off-by: Chao Bi <chao.bi@intel.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
In case we found a matching USB PHY in usb_get_phy() but the call to
try_module_get() fails, we shouldn't return a (probably soon dangling)
pointer but an ERR_PTR instead.
Signed-off-by: Mathias Krause <minipli@googlemail.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
Include "u_rndis.h" in order to fix the following sparse warning:
drivers/usb/gadget/rndis.c:1144:5: warning: symbol 'rndis_init' was not declared. Should it be static?
drivers/usb/gadget/rndis.c:1177:6: warning: symbol 'rndis_exit' was not declared. Should it be static?
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
completion in udc_controller->done should be assign with proper
value before complete called. The complete called in fsl_udc_release
which intern called from usb_del_gadget_udc, so moving assignment
before calling usb_del_gadget_udc
Signed-off-by: Suresh Gupta <suresh.gupta@freescale.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
When the platform initialization fails due to missing resources, it will
return -EPROBE_DEFER after dsps_musb_init() has been called.
dsps_musb_init() calls dsps_musb_dbg_init() to allocate the debugfs
nodes. At a later point in time, the probe will be retried, and
dsps_musb_dbg_init() will be called again. debugfs_create_dir() will
fail this time, as the node already exists, and so the entire device
probe will fail with -ENOMEM.
Fix this by moving debugfs_remove_recursive() from dsps_remove() to the
plaform's exit function, so it will be cleanly torn down when the probe
fails. It also feels more natural this way, as .exit is the counterpart
to .init.
Signed-off-by: Daniel Mack <zonque@gmail.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
Otherwise the value from the last probe would be retained that possibly is
freed since (the UDC is removed) and therefore no longer relevant. Reproducible
with the dummy UDC:
modprobe dummy_hcd
mount -t gadgetfs gadgetfs /dev/gadget
umount /dev/gadget
rmmod dummy_hcd
mount -t gadgetfs gadgetfs /dev/gadget
BUG: unable to handle kernel paging request at ffffffffa066fd9d
Call Trace:
[<ffffffff811d0cd2>] ? d_alloc_name+0x22/0x50
[<ffffffff812b74dc>] ? selinux_d_instantiate+0x1c/0x20
[<ffffffffa067d687>] gadgetfs_create_file+0x27/0xa0 [gadgetfs]
[<ffffffffa067da70>] ? setup_req.isra.4+0x80/0x80 [gadgetfs]
[<ffffffffa067dbac>] gadgetfs_fill_super+0x13c/0x180 [gadgetfs]
[<ffffffff811bc832>] mount_single+0x92/0xc0
[<ffffffffa067d0f8>] gadgetfs_mount+0x18/0x20 [gadgetfs]
[<ffffffff811bc8f9>] mount_fs+0x39/0x1b0
[<ffffffff8116b220>] ? __alloc_percpu+0x10/0x20
[<ffffffff811d6da3>] vfs_kern_mount+0x63/0xf0
[<ffffffff811d93be>] do_mount+0x23e/0xac0
[<ffffffff811660eb>] ? strndup_user+0x4b/0xf0
[<ffffffff811d9f63>] SyS_mount+0x83/0xc0
[<ffffffff81695b69>] system_call_fastpath+0x16/0x1b
Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Signed-off-by: Felipe Balbi <balbi@ti.com>
It was impossible to enumerate on a SuperSpeed (XHCI) host
with alternate setting = 1 due to the wrongly set 'bMaxBurst'
field in the SuperSpeed Endpoint Companion descriptor.
Testcase:
<host> modprobe -r usbtest; modprobe usbtest alt=1
<device> modprobe g_zero
plug device to SuperSpeed port on the host.
Without this patch the host always complains like so
"usb 12-2: Not enough bandwidth for new device state.
usb 12-2: Not enough bandwidth for altsetting 1"
Bug was introduced by commit cf9a08ae in v3.9
Fixes: cf9a08ae5a (usb: gadget: convert source sink and loopback to
new function interface)
Cc: 3.9+ <stable@vger.kernel.org> # 3.9+
Reviewed-by: Felipe Balbi <balbi@ti.com>
Acked-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Roger Quadros <rogerq@ti.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
Make dwc3_gadget_resize_tx_fifos() iterate only over IN
endpoints that are actually present, based on the
num_in_eps parameter. This terminates the loop so as to
prevent dereferencing a potential NULL dwc->eps[i] where
i >= (num_in_eps + num_out_eps).
Signed-off-by: Jack Pham <jackp@codeaurora.org>
Signed-off-by: Felipe Balbi <balbi@ti.com>
The version of the drm_tegra_submit structure that was merged all the
way back in 3.10 contains a pad field that was originally intended to
properly pad the following __u64 field. Unfortunately it seems like a
different field was dropped during review that caused this padding to
become unnecessary, but the pad field wasn't removed at that time.
One possible side-effect of this is that since the __u64 following the
pad is now no longer properly aligned, the compiler may (or may not)
introduce padding itself, which results in no predictable ABI.
Rectify this by removing the pad field so that all fields are again
naturally aligned. Technically this is breaking existing userspace ABI,
but given that there aren't any (released) userspace drivers that make
use of this yet, the fallout should be minimal.
Fixes: d43f81cbaf ("drm/tegra: Add gr2d device")
Cc: <stable@vger.kernel.org> # 3.10
Signed-off-by: Thierry Reding <treding@nvidia.com>
BIT_WORD() truncates rather than rounds, so the loops in
syncpt_thresh_isr() and _host1x_intr_disable_all_syncpt_intrs() use <=
rather than < in an attempt to process the correct number of registers
when rounding of the conversion of count of bits to count of words is
necessary. However, when rounding isn't necessary because the value is
already a multiple of the divisor (as is the case for all values of
nb_pts the code actually sees), this causes one too many registers to
be processed.
Solve this by using and explicit DIV_ROUND_UP() call, rather than
BIT_WORD(), and comparing with < rather than <=.
Fixes: 7ede0b0bf3 ("gpu: host1x: Add syncpoint wait and interrupts")
Cc: <stable@vger.kernel.org> # 3.10
Signed-off-by: Stephen Warren <swarren@nvidia.com>
Acked-By: Terje Bergstrom <tbergstrom@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
This patch removes the i2c bus code from the codec driver and creates seperate i2c driver.
Signed-off-by: Brian Austin <brian.austin@cirrus.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
The prot flags passed to the IOMMU map handler are defined in
include/linux/iommu.h as IOMMU_(READ|WRITE|CACHE|EXEC). However, the
driver expects to receive MMU_RAM_* OMAP-specific flags. This causes
IOMMU flags being interpreted as page sizes, leading to failures.
Hardcode the OMAP mapping parameters to little-endian, 8-bits and
non-mixed page attributes. Furthermore, as the OMAP IOMMU doesn't
support read-only or write-only mappings, ignore the prot value.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Sakari Ailus <sakari.ailus@iki.fi>
Acked-by: Suman Anna <s-anna@ti.com>
The IOMMU core breaks out mappings into pages already, there's no
need to support mapping multiple pages in one go.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Sakari Ailus <sakari.ailus@iki.fi>
The flush_iotlb_page() function prints a debug message when no
corresponding page was found in the TLB. That condition is incorrectly
checked and always resolves to true, given that the for_each_iotlb_cr()
loop is never interrupted and always reaches obj->nr_tlb_entries.
Given that we can't have two TLB entries for the same VA, break from the
loop when a match is found.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Suman Anna <s-anna@ti.com>
The to_iommu definition is used only locally to the omap-iommu.c
source file, and it has nothing to do with the page attributes
defined in omap-iopgtable.h. So, move the definition out of
omap-iopgtable.h header file.
Signed-off-by: Suman Anna <s-anna@ti.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
The current OMAP IOMMU ops for .domain_has_cap is a stub,
and the iommu core already returns a value of 0 if the
domain doesn't have a .domain_has_cap ops plugged in. So,
clean up this stub function.
Signed-off-by: Suman Anna <s-anna@ti.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
The iotlb_entry field values are used directly in omap2_alloc_cr,
a function used in preparing the MMU_CAM and MMU_RAM registers.
The iotlb_entry.valid value is being set incorrectly to 1 at the
moment, and this would result in overriding the PAGESIZE bit field
of the MMU_CAM register if prefetching of the entries were to be
supported.
The bug has not caused any MMU faults due to incorrect size
programming so far as the prefetching is disabled by default. Fix
this by using the correct init value for the iotlb_entry.valid
field.
Signed-off-by: Suman Anna <s-anna@ti.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
BugLink: http://bugs.launchpad.net/bugs/1305480
The kerneloops-daemon scans dmesg for common crash signatures, among
which is 'BUG:'. The message emitted by the PCM library is really a
warning, so the most expedient thing to do seems to be to change the
string.
Signed-off-by: Tim Gardner <tim.gardner@canonical.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
pm_runtime_get_sync may not always succeed depending on SoC involved.
So handle the error appropriately ensuring usage_count is accurate in
case of failure.
Signed-off-by: Nishanth Menon <nm@ti.com>
Reviewed-by: Felipe Balbi <balbi@ti.com>
Reported-by: Joachim Eastwood <manabian@gmail.com>
Tested-by: Joachim Eastwood <manabian@gmail.com>
Acked-by: Joel Fernandes <joelf@ti.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The driver for the "Picochip picoXcell true random number generator" was
added in v2.6.39. Its Kconfig symbol has always depended on
PICOXCELL_PC3X3. But that Kconfig symbol has never been part of the
tree. This means this driver has never been buildable. Let's remove it.
It can be re-added if its dependencies are actually part of the tree.
Signed-off-by: Paul Bolle <pebolle@tiscali.nl>
Acked-by: Jamie Iles <jamie@jamieiles.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
As result of deprecation of MSI-X/MSI enablement functions
pci_enable_msix() and pci_enable_msi_block() all drivers
using these two interfaces need to be updated to use the
new pci_enable_msi_range() or pci_enable_msi_exact()
and pci_enable_msix_range() or pci_enable_msix_exact()
interfaces.
Signed-off-by: Alexander Gordeev <agordeev@redhat.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: linux-crypto@vger.kernel.org
Cc: linux-pci@vger.kernel.org
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Patch adds large test-vectors for SHA algorithms for better code coverage in
optimized assembly implementations. Empty test-vectors are also added, as some
crypto drivers appear to have special case handling for empty input.
Signed-off-by: Jussi Kivilinna <jussi.kivilinna@iki.fi>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
- The 4-byte sg_mid_buf is located in the middle of the coherence memory
sg_cpu. Don't call dma_map_single to get its physical address. Get the its
base physical address from the physical address of sg_cpu instead.
- Should set up the dma descriptor data after the 4-byte sg_mid_buf is
filled in completely from next sg buffer.
- memory copy from sg buffer should be done via virtual address.
- Remove unused reference to blackfin header
Signed-off-by: Sonic Zhang <sonic.zhang@analog.com>
Reviewed-by: Marek Vasut <marex@denx.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
in case of multiple crc devices are probed.
Call platform_set_drvdata() before adding new CRC device into the list.
Signed-off-by: Sonic Zhang <sonic.zhang@analog.com>
Reviewed-by: Marek Vasut <marex@denx.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Move architecture independant crc header file out of the blackfin folder.
Signed-off-by: Sonic Zhang <sonic.zhang@analog.com>
Reviewed-by: Marek Vasut <marex@denx.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
HW_RANDOM_ATMEL should not only default to ARCH_AT91, it should depend
on it. This driver is useless on other architectures.
Likewise, HW_RANDOM_EXYNOS should depend on ARCH_EXYNOS, as it it
useless on other architectures.
Also set the default to HW_RANDOM for the few architecture-specific
drivers which didn't have it yet, for consistency.
Signed-off-by: Jean Delvare <jdelvare@suse.de>
Cc: Nicolas Ferre <nicolas.ferre@atmel.com>
Cc: Matt Mackall <mpm@selenic.com>
Cc: Kukjin Kim <kgene.kim@samsung.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This makes configuration more convenient IMHO, and avoids having to
repeat the dependency on HW_RANDOM for every single driver.
Signed-off-by: Jean Delvare <jdelvare@suse.de>
Cc: Matt Mackall <mpm@selenic.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
UML_RANDOM is the only hardware random number generator option which
does not depend on HW_RANDOM. Having it in the middle of the other
options breaks the alignment in "make menuconfig". Move it at the last
position to avoid that.
Signed-off-by: Jean Delvare <jdelvare@suse.de>
Cc: Matt Mackall <mpm@selenic.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Use devm_ioremap_resource() because devm_request_and_ioremap() is
obsoleted by devm_ioremap_resource().
Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Acked-by: Joel Fernandes <joelf@ti.com>
Reviewed-by: Marek Vasut <marex@denx.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This adds test cases for SHA-1, SHA-224, SHA-256 and AES-CCM with an input size
that is an exact multiple of the block size. The reason is that some
implementations use a different code path for these cases.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This patch replaces rcu_assign_pointer(x, NULL) with RCU_INIT_POINTER(x, NULL)
The rcu_assign_pointer() ensures that the initialization of a structure
is carried out before storing a pointer to that structure.
And in the case of the NULL pointer, there is no structure to initialize.
So, rcu_assign_pointer(p, NULL) can be safely converted to RCU_INIT_POINTER(p, NULL)
Signed-off-by: Monam Agarwal <monamagarwal123@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Several patches to fix cpu hotplug and the down'd cpu's irq
relocations have been submitted in the past month or so. The
patches should resolve the problems with cpu hotplug and irq
relocation, however, there is always a possibility that a bug
still exists. The big problem with debugging these irq
reassignments is that the cpu down completes and then we get
random stack traces from drivers for which irqs have not been
properly assigned to a new cpu. The stack traces are a mix of
storage, network, and other kernel subsystem (I once saw the
serial port stop working ...) warnings and failures.
The problem with these failures is that they are difficult to
diagnose. There is no warning in the cpu hotplug down path to
indicate that an IRQ has failed to be assigned to a new cpu, and
all we are left with is a stack trace from a driver, or a
non-functional device. If we had some information on the
console debugging these situations would be much easier; after
all we can map an IRQ to a device by simply using lspci or
/proc/interrupts.
The current code, fixup_irqs(), which migrates IRQs from the
down'd cpu and is called close to the end of the cpu down path,
calls chip->set_irq_affinity which eventually calls
__assign_irq_vector(). Errors are not propogated back from this
function call and this results in silent irq relocation
failures.
This patch fixes this issue by returning the error codes up the
call stack and prints out a warning if there is a relocation
failure.
Signed-off-by: Prarit Bhargava <prarit@redhat.com>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Rui Wang <rui.y.wang@intel.com>
Cc: Liu Ping Fan <kernelfans@gmail.com>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Yoshihiro YUNOMAE <yoshihiro.yunomae.ez@hitachi.com>
Cc: Lv Zheng <lv.zheng@intel.com>
Cc: Seiji Aguchi <seiji.aguchi@hds.com>
Cc: Yang Zhang <yang.z.zhang@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Steven Rostedt (Red Hat) <rostedt@goodmis.org>
Cc: Li Fei <fei.li@intel.com>
Cc: gong.chen@linux.intel.com
Link: http://lkml.kernel.org/r/1396440673-18286-1-git-send-email-prarit@redhat.com
[ Made small cleanliness tweaks. ]
Signed-off-by: Ingo Molnar <mingo@kernel.org>
This helps locating duplicates and inserting new headers.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Tested-by: Wolfram Sang <wsa@sang-engineering.com>
Do not include the paragraph about writing to the Free Software
Foundation's mailing address from the sample GPL notice. The FSF has
changed addresses in the past, and may do so again. Linux already
includes a copy of the GPL.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Tested-by: Wolfram Sang <wsa@sang-engineering.com>
The sh_mtu2 driver gets the MTU2 functional clock using a connection ID
of "mtu2_fck". While all SH SoCs create clock lookup entries with a NULL
device ID and a "mtu2_fck" connection ID, the ARM SoCs use the device ID
only with a NULL connection ID. This works on legacy platforms but will
break on ARM with DT boot.
Fix the situation by using a connection ID of "fck" in the non-legacy
platform data case. Clock lookup entries will be renamed to use the
device ID as well as the connection ID as platforms get moved to new
platform data. The legacy code will eventually be dropped, leaving us
with device ID based clock lookup, compatible with DT boot.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Tested-by: Wolfram Sang <wsa@sang-engineering.com>
MTU2 hardware devices can support multiple channels, with global
registers and per-channel registers. The sh_mtu2 driver currently models
the hardware with one Linux device per channel. This model makes it
difficult to handle global registers in a clean way.
Add support for a new model that uses one Linux device per timer with
multiple channels per device. This requires changes to platform data,
add new channel configuration fields.
Support for the legacy model is kept and will be removed after all
platforms switch to the new model.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Tested-by: Wolfram Sang <wsa@sang-engineering.com>
All boards use clock event ratings of 200 for the MTU2, hardcode it in
the driver.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Tested-by: Wolfram Sang <wsa@sang-engineering.com>
The MTU2 is not tied to CPU0, make it usable on any CPU.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Tested-by: Wolfram Sang <wsa@sang-engineering.com>
Define symbolic macros for all used registers bits.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Tested-by: Wolfram Sang <wsa@sang-engineering.com>
This prepares the driver for multi-channel support.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Tested-by: Wolfram Sang <wsa@sang-engineering.com>
One kzalloc a day keeps the bugs away.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Tested-by: Wolfram Sang <wsa@sang-engineering.com>
Use the index as the timer start/stop bit and when printing messages to
identify the channel.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Tested-by: Wolfram Sang <wsa@sang-engineering.com>
