Use comedi_timeout() to wait for the analog input end-of-conversion.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Use comedi_timeout() to wait for the analog input end-of-conversion.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Use comedi_timeout() to wait for the analog input end-of-conversion.
Change the errno returned when the conversion overflows from -ETIME
to -EOVERFLOW.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Use comedi_timeout() to wait for the analog input end-of-conversion.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Use comedi_timeout() to wait for the analog input and output end-of-
conversions.
This prevents a deadlock condition that could occur by providing a
timeout in case the end-of-conversion does not happen.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Use comedi_timeout() to wait for the analog input end-of-conversion.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Use comedi_timeout() to wait for the analog input end-of-conversion.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Use comedi_timeout() to wait for the analog input end-of-conversion.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Use comedi_timeout() to wait for the analog input end-of-conversion.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Use comedi_timeout() to wait for the analog input end-of-conversion.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Use comedi_timeout() to wait for the analog input end-of-conversion.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Use comedi_timeout() to wait for the analog input end-of-conversion.
Remove the unnecessary comments.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Use comedi_timeout() to wait for the analog input end-of-conversion.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Use comedi_timeout() to wait for the analog input end-of-conversion.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Use comedi_timeout() to wait for the analog input end-of-conversion.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Use comedi_timeout() to wait for the analog input end-of-conversion.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Use comedi_timeout() to wait for the analog input end-of-conversion.
Change the errno returned for an overrun from -EIO to -EOVERFLOW.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Use comedi_timeout() to wait for the analog output end-of-conversion.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Use comedi_timeout() to wait for the analog input and output end-of-
conversions.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Use comedi_timeout() to wait for the analog input end-of-conversion.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Use comedi_timeout() to wait for the analog input end-of-conversion.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Use comedi_timeout() to wait for the analog input end-of-conversion.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Use comedi_timeout() to wait for the analog input end-of-conversion.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Use comedi_timeout() to wait for the analog input end-of-conversion.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Use comedi_timeout() to wait for the analog input end-of-conversion.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Use comedi_timeout() to wait for the analog input end-of-conversion.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Use comedi_timeout() to wait for the analog output end-of-conversion.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Use comedi_timeout() to wait for the analog input end-of-conversion.
Since this is the sample skeleton driver, add comments about how the
callback function works with comedi_timeout().
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Introduce a comedi core helper function to handle the boilerplate
needed by the drivers to busy- wait for a condition to occur.
Typically this condition is the analog input/output end-of-conversion
used with the comedi (*insn_read) and (*insn_write) operations.
To use this function, the drivers just need to provide a callback
that checks for the desired condition. The callback should return
0 if the condition is met or -EBUSY if it is still waiting. Any
other errno will be returned to the caller. If the timeout occurs
before the condition is met -ETIMEDOUT will be returned.
The parameters to the callback function are the comedi_device,
comedi_subdevice, and comedi_insn pointers that were passed to the
(*insn_read) or (*insn_write) as well as an unsigned long, driver
specific, 'context' that can be used to pass any other information
that might be needed in the callback. This 'context' could be anything
such as the register offset to read the status or the bits needed
to check the status. The comedi_timeout() function itself does not
use any of these parameters.
This will help remove all the crazy "wait this many loops" used by
some of the drivers. It also creates a common errno for comedi to
detect when a timeout occurs.
ADC/DAC conversion times are typically pretty fast, usually around
100K samples/sec (10 usec). A conservative timeout of 1 second is used
in comedi_timeout().
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
drivers/staging/gs_fpgaboot/gs_fpgaboot.c:305:1-3: WARNING: PTR_RET can be used
Use PTR_ERR_OR_ZERO rather than if(IS_ERR(...)) + PTR_ERR
Generated by: coccinelle/api/ptr_ret.cocci
CC: Insop Song <insop.song@gainspeed.com>
Signed-off-by: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The symbol is an orphan, get rid of it.
Cc: Paul Bolle <pebolle@tiscali.nl>
Cc: Omar Ramirez Luna <omar.ramirez@copitl.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
set u64 mc_filter to ~0x0 multi cast filter off and write MAC_REG_MAR0 using
MACvWriteMultiAddr to replace pbyData.
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The rtw_recv_indicatepkt() function in the file named
drivers/staging/rtl8188eu/os_dep/recv_linux.c has this strange code:
rcu_read_lock();
rcu_dereference(padapter->pnetdev->rx_handler_data);
rcu_read_unlock();
This code has no effect. Normally, you would assign the result of
rcu_dereference() to some variable, but it is not clear from the
code what variable that would be. Therefore, this patch applies to
the TODO file instead of the code itself.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
After updating Smatch, the following new errors and warnings are reported:
drivers/staging/rtl8188eu/core/rtw_recv.c:368 recvframe_chkmic() warn: variable dereferenced before check 'psecuritypriv' (see line 364)
drivers/staging/rtl8188eu/os_dep/ioctl_linux.c:2642 rtw_wps_start() warn: variable dereferenced before check 'pdata' (see line 2636)
drivers/staging/rtl8188eu/os_dep/ioctl_linux.c:4461 rtw_dbg_port() error: we previously assumed 'pregpriv' could be null (see line 4453)
drivers/staging/rtl8188eu/os_dep/ioctl_linux.c:4473 rtw_dbg_port() error: we previously assumed 'pregpriv' could be null (see line 4469)
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Smatch reports the following:
drivers/staging/rtl8821ae/rtl8821ae/hw.c:153 _rtl8821ae_set_fw_clock_on() info: ignoring unreachable code.
Upon investigation, the code in this region has the capability of creating
an infinite loop.
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
There are a few lines in this driver that depend on a macro
CONFIG_BT_COEXIST. But there's no Kconfig symbol of that name nor is
there a preprocessor define for that string. So remove these lines.
Signed-off-by: Paul Bolle <pebolle@tiscali.nl>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In this conditional statement, if (chan < 16), but the instruction passed
in data[0] is INSN_CONFIG_DIO_QUERY, the function does not return early,
but the else-branch does not get executed either. As a result, mask
would be used uninitialized in the next line. We want
comedi_dio_insn_config() to use a chan_mask based on the chanspec for the
INSN_CONFIG_DIO_QUERY instruction, so mask should be initialized to 0.
Then, if instead the instruction is INSN_CONFIG_DIO_{INPUT,OUTPUT}, we
return an error if (chan < 16) as these are invalid instructions for
ports 0 and 1, or update the mask otherwise, so all the io_bits are
modified for port 2. This ensures that mask is always initialized by the
time it is used.
Signed-off-by: Chase Southwood <chase.southwood@yahoo.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Set TIF_MEMDIE tsk_thread flag before send kill signal to the
selected thread. This is to fit a usual code sequence and avoid
potential race issue.
Signed-off-by: Weijie Yang <weijie.yang@samsung.com>
Acked-by: David Rientjes <rientjes@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
If we found device already exists during hot add device, we should leave
it, not turn the slot off.
Signed-off-by: Yijing Wang <wangyijing@huawei.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
This bit of information is in the Kconfig help text:
"Note the boot CPU will still be kept outside the range to
handle the timekeeping duty."
However neither the variable NO_HZ_FULL_ALL, or the prompt
convey this important detail, so lets add it to the prompt
to make it more explicitly obvious to the average user.
Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Paul Gortmaker <paul.gortmaker@windriver.com>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1391711781-7466-1-git-send-email-paul.gortmaker@windriver.com
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
When a timer is enqueued or modified on a remote target, the latter is
expected to see and handle this timer on its next tick. However if the
target is idle and CONFIG_NO_HZ_IDLE=y, the CPU may be sleeping tickless
and the timer may be ignored.
wake_up_nohz_cpu() takes care of that by setting TIF_NEED_RESCHED and
sending an IPI to idle targets so that the tick is reevaluated on the
idle loop through the tick_nohz_idle_*() APIs.
Now this is all performed regardless of the power properties of the
timer. If the timer is deferrable, idle targets don't need to be woken
up. Only the next buzy tick needs to care about it, and no IPI kick
is needed for that to happen.
So lets spare the IPI on idle targets when the timer is deferrable.
Meanwhile we keep the current behaviour on full dynticks targets. We can
spare IPIs on idle full dynticks targets as well but some tricky races
against idle_cpu() must be dealt all along to make sure that the timer
is well handled after idle exit. We can deal with that later since
NO_HZ_FULL already has more important powersaving issues.
Reported-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Paul Gortmaker <paul.gortmaker@windriver.com>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/CAKohpomMZ0TAN2e6N76_g4ZRzxd5vZ1XfuZfxrP7GMxfTNiLVw@mail.gmail.com
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
