This patch adds sound support for Lager board.
But, it is using PIO transfer at this point.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
[horms+renesas@verge.net.au: resolved conflicts]
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Add Lager board code to check the PWEN GPIO signal and refuse to
allow probe of the USBHS driver in case of DIP misconfiguration.
For correct operation Lager DIP switches SW5 and SW6 shall be
configured in 2-3 position to enable USB Function support.
If the DIP switch is configured incorrectly then the user can
simply adjust the hardware and either reboot or use the bind interface
to try to probe again:
# echo renesas_usbhs > /sys/bus/platform/drivers/renesas_usbhs/bind
Signed-off-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Latest Renesas Chip has some SDHI channels and the WP pin
availability depends on its channel or HW implementation.
Thus, this patch decides new policy whch indicates
WP is disabled as default.
But, we can use wp-gpios property to enable it as
other method.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
This enables I2C support in koelsch_defconfig.
Signed-off-by: Valentine Barshak <valentine.barshak@cogentembedded.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
This adds I2C[1245] busses support to Koelsch board.
I2C[03] do not have any slave devices connected and
are not used because of the following:
* I2C0 pins are multiplexed with LBSC pins;
* I2C3 pins are multiplexed with EtherMAC and VIN0 pins.
Signed-off-by: Valentine Barshak <valentine.barshak@cogentembedded.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Pass Ether's PHY IRQ (which is IRQC's IRQ0) to the 'sh_eth' driver. Set the IRQ
trigger type to be low-level as per the Micrel PHY driver's setup.
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Acked-by: Magnus Damm <magnus.damm@gmail.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Pass Ether's PHY IRQ (which is IRQC's IRQ0) to the 'sh_eth' driver. Set the IRQ
trigger type to be low-level as per the Micrel PHY driver's setup.
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Acked-by: Magnus Damm <magnus.damm@gmail.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
the evergreen CS parser has allowed this for a while, just port
the code to the r600 one.
This is required before geom shaders can be made work.
v2: agd5f: minor cleanup and add additional 7xx reg.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
A couple of vmwgfx fixes together with missing bits of legacy device
emulation to facilitate old user-space drivers on new devices.
The shader emulation bits are a bit large, but since they mostly touch the
new device code, regressions are unlikely. I figure the gain of having
this from the start clearly outweighs the risc of adding these bits at
this point.
Pull request of 2014-02-05
* tag 'vmwgfx-fixes-3.14-2014-02-05' of git://people.freedesktop.org/~thomash/linux:
vmwgfx: Fix unitialized stack read in vmw_setup_otable_base
drm/vmwgfx: Reemit context bindings when necessary v2
drm/vmwgfx: Detect old user-space drivers and set up legacy emulation v2
drm/vmwgfx: Emulate legacy shaders on guest-backed devices v2
drm/vmwgfx: Fix legacy surface reference size copyback
drm/vmwgfx: Fix SET_SHADER_CONST emulation on guest-backed devices
drm/vmwgfx: Fix regression caused by "drm/ttm: make ttm reservation calls behave like reservation calls"
drm/vmwgfx: Don't commit staged bindings if execbuf fails
Two ttm regression fixes.
Pull request of 2014-02-05
* tag 'ttm-fixes-3.14-2014-02-05' of git://people.freedesktop.org/~thomash/linux:
drm/ttm: Don't clear page metadata of imported sg pages
drm/ttm: Fix TTM object open regression
I totally sign inverted my way out of this one.
Cc: stable@vger.kernel.org
Reported-by: "Sabrina Dubroca" <sd@queasysnail.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Jesse Gross says:
====================
Open vSwitch
A handful of bug fixes for net/3.14. High level fixes are:
* Regressions introduced by the zerocopy changes, particularly with
old userspaces.
* A few bugs lingering from the introduction of megaflows.
* Overly zealous error checking that is now being triggered frequently
in common cases.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
The recent patch to fix receive side flow control
(11b57f9025: xen-netback: stop vif thread
spinning if frontend is unresponsive) solved the spinning thread problem,
however caused an another one. The receive side can stall, if:
- [THREAD] xenvif_rx_action sets rx_queue_stopped to true
- [INTERRUPT] interrupt happens, and sets rx_event to true
- [THREAD] then xenvif_kthread sets rx_event to false
- [THREAD] rx_work_todo doesn't return true anymore
Also, if interrupt sent but there is still no room in the ring, it take quite a
long time until xenvif_rx_action realize it. This patch ditch that two variable,
and rework rx_work_todo. If the thread finds it can't fit more skb's into the
ring, it saves the last slot estimation into rx_last_skb_slots, otherwise it's
kept as 0. Then rx_work_todo will check if:
- there is something to send to the ring (like before)
- there is space for the topmost packet in the queue
I think that's more natural and optimal thing to test than two bool which are
set somewhere else.
Signed-off-by: Zoltan Kiss <zoltan.kiss@citrix.com>
Reviewed-by: Paul Durrant <paul.durrant@citrix.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pull irq updates from Thomas Gleixner:
"This lot provides:
* Bugfixes for armada irq controller
* Updates to renesas irq chip
* Support for the TI-NSPIRE irq controller
Not strictly a bug fix only pull request, but important updates for
some of the arm Socs which I completely forgot to send last week.
Seems like my obliviousness is getting worse, I just can't remember
when it started"
* 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
irqchip: Add support for TI-NSPIRE irqchip
irqchip: renesas-irqc: Enable mask on suspend
irqchip: renesas-irqc: Use lazy disable
irqchip: armada-370-xp: fix MSI race condition
irqchip: armada-370-xp: fix IPI race condition
- Revert "xen/grant-table: Avoid m2p_override during mapping" as it broke Xen ARM build.
- Fix CR4 not being set on AP processors in Xen PVH mode.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJS8AyQAAoJEFjIrFwIi8fJbD4IAJssMuaLI5CRsSWBgDFHHDFt
srVJpDOYQiDr/TxkwFCVcL4sFy9Htb3KMArU4eIBl6uMqQbGa+3rHyXcHYI219YY
XH3D8RG+9JChwsxtaeUEzwx1C8ehcygD34vtdcoQXa7eBuEi4TL3HeLifR+HrXKO
UdFrTA34FmvpVFbSuRXkZh5sd6ca9et9xHuQHM8SIY6pVokY6xaEYOp17tfPZpwM
7A6LFjUjXeugHC2L3+/H8UOHA9nSZQvnMiZOWq2Cusc2Dt2V7emzgk2wcc2CHttf
EA6GbtiJzHqMPmt5EjubI9hHdSMB31HpY4hnQE38+ucl+BwiSdRE9z2Rm4TYClg=
=IX4M
-----END PGP SIGNATURE-----
Merge tag 'stable/for-linus-3.14-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip
Pull Xen fixes from Konrad Rzeszutek Wilk:
"Bug-fixes:
- Revert "xen/grant-table: Avoid m2p_override during mapping" as it
broke Xen ARM build.
- Fix CR4 not being set on AP processors in Xen PVH mode"
* tag 'stable/for-linus-3.14-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
xen/pvh: set CR4 flags for APs
Revert "xen/grant-table: Avoid m2p_override during mapping"
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.14 (GNU/Linux)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=G2gr
-----END PGP SIGNATURE-----
Merge tag 'please-pull-ia64-syscalls' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux
Pull ia64 update from Tony Luck:
"Wire up new sched_setattr and sched_getattr syscalls"
* tag 'please-pull-ia64-syscalls' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux:
[IA64] Wire up new sched_setattr and sched_getattr syscalls
Pull NVMe driver update from Matthew Wilcox:
"Looks like I missed the merge window ... but these are almost all
bugfixes anyway (the ones that aren't have been baking for months)"
* git://git.infradead.org/users/willy/linux-nvme:
NVMe: Namespace use after free on surprise removal
NVMe: Correct uses of INIT_WORK
NVMe: Include device and queue numbers in interrupt name
NVMe: Add a pci_driver shutdown method
NVMe: Disable admin queue on init failure
NVMe: Dynamically allocate partition numbers
NVMe: Async IO queue deletion
NVMe: Surprise removal handling
NVMe: Abort timed out commands
NVMe: Schedule reset for failed controllers
NVMe: Device resume error handling
NVMe: Cache dev->pci_dev in a local pointer
NVMe: Fix lockdep warnings
NVMe: compat SG_IO ioctl
NVMe: remove deprecated IRQF_DISABLED
NVMe: Avoid shift operation when writing cq head doorbell
A couple of driver fixes here but the main thing is a fix to the checks
for deferred probe non-DT systems with fully specified regulators which
had been broken by a device tree fix which meant that we wouldn't insert
optional regulators. This had slipped through the cracks since very few
systems do that in the first place and those that do it in mainline
don't need optional regulators anyway.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=2an0
-----END PGP SIGNATURE-----
Merge tag 'regulator-v3.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator
Pull regulator fixes from Mark Brown:
"A couple of driver fixes here but the main thing is a fix to the
checks for deferred probe non-DT systems with fully specified
regulators which had been broken by a device tree fix which meant that
we wouldn't insert optional regulators.
This had slipped through the cracks since very few systems do that in
the first place and those that do it in mainline don't need optional
regulators anyway"
* tag 'regulator-v3.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator:
regulator: s2mps11: Fix NULL pointer of_node value when using platform data
regulator: core: Correct default return value for full constraints
regulator: ab3100: cast fix
Pull crypto fixes from Herbert Xu:
"This fixes a number of concurrency issues on s390 where multiple users
of the same crypto transform may clobber each other's results"
* git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
crypto: s390 - fix des and des3_ede ctr concurrency issue
crypto: s390 - fix des and des3_ede cbc concurrency issue
crypto: s390 - fix concurrency issue in aes-ctr mode
CONFIG_X86_32 doesn't map the boot services regions into the EFI memory
map (see commit 700870119f ("x86, efi: Don't map Boot Services on
i386")), and so efi_lookup_mapped_addr() will fail to return a valid
address. Executing the ioremap() path in efi_bgrt_init() causes the
following warning on x86-32 because we're trying to ioremap() RAM,
WARNING: CPU: 0 PID: 0 at arch/x86/mm/ioremap.c:102 __ioremap_caller+0x2ad/0x2c0()
Modules linked in:
CPU: 0 PID: 0 Comm: swapper/0 Not tainted 3.13.0-0.rc5.git0.1.2.fc21.i686 #1
Hardware name: DellInc. Venue 8 Pro 5830/09RP78, BIOS A02 10/17/2013
00000000 00000000 c0c0df08 c09a5196 00000000 c0c0df38 c0448c1e c0b41310
00000000 00000000 c0b37bc1 00000066 c043bbfd c043bbfd 00e7dfe0 00073eff
00073eff c0c0df48 c0448ce2 00000009 00000000 c0c0df9c c043bbfd 00078d88
Call Trace:
[<c09a5196>] dump_stack+0x41/0x52
[<c0448c1e>] warn_slowpath_common+0x7e/0xa0
[<c043bbfd>] ? __ioremap_caller+0x2ad/0x2c0
[<c043bbfd>] ? __ioremap_caller+0x2ad/0x2c0
[<c0448ce2>] warn_slowpath_null+0x22/0x30
[<c043bbfd>] __ioremap_caller+0x2ad/0x2c0
[<c0718f92>] ? acpi_tb_verify_table+0x1c/0x43
[<c0719c78>] ? acpi_get_table_with_size+0x63/0xb5
[<c087cd5e>] ? efi_lookup_mapped_addr+0xe/0xf0
[<c043bc2b>] ioremap_nocache+0x1b/0x20
[<c0cb01c8>] ? efi_bgrt_init+0x83/0x10c
[<c0cb01c8>] efi_bgrt_init+0x83/0x10c
[<c0cafd82>] efi_late_init+0x8/0xa
[<c0c9bab2>] start_kernel+0x3ae/0x3c3
[<c0c9b53b>] ? repair_env_string+0x51/0x51
[<c0c9b378>] i386_start_kernel+0x12e/0x131
Switch to using early_memremap(), which won't trigger this warning, and
has the added benefit of more accurately conveying what we're trying to
do - map a chunk of memory.
This patch addresses the following bug report,
https://bugzilla.kernel.org/show_bug.cgi?id=67911
Reported-by: Adam Williamson <awilliam@redhat.com>
Cc: Josh Triplett <josh@joshtriplett.org>
Cc: Matthew Garrett <mjg59@srcf.ucam.org>
Cc: Rafael J. Wysocki <rjw@rjwysocki.net>
Signed-off-by: Matt Fleming <matt.fleming@intel.com>
For the reject module, we need to add AF-specific implementations to
get rid of incorrect module dependencies. Try to load an AF-specific
module first and fall back to generic modules.
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
The key was missing in the list of valid keys, add it.
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Commit c9c8e48597 (netfilter: nf_tables: dump sets in all existing families)
changed nft_ctx_init_from_setattr() to only look up the address family if it
is not NFPROTO_UNSPEC. However if it is NFPROTO_UNSPEC and a table attribute
is given, nftables_afinfo_lookup() will dereference the NULL afi pointer.
Fix by checking for non-NULL afi and also move a check added by that commit
to the proper position.
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
It can take some time to validate the image, make sure
{allyes|allmod}config doesn't enable it.
I'd say randconfig will cover it often enough, and the failure is also
borderline build coverage related: you cannot really make the decoder
test fail via source level changes, only with changes in the build
environment, so I agree with Andi that we can disable this one too.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Paul Gortmaker paul.gortmaker@windriver.com>
Suggested-and-acked-by: Andi Kleen andi@firstfloor.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This changes 'do_execve()' to get the executable name as a 'struct
filename', and to free it when it is done. This is what the normal
users want, and it simplifies and streamlines their error handling.
The controlled lifetime of the executable name also fixes a
use-after-free problem with the trace_sched_process_exec tracepoint: the
lifetime of the passed-in string for kernel users was not at all
obvious, and the user-mode helper code used UMH_WAIT_EXEC to serialize
the pathname allocation lifetime with the execve() having finished,
which in turn meant that the trace point that happened after
mm_release() of the old process VM ended up using already free'd memory.
To solve the kernel string lifetime issue, this simply introduces
"getname_kernel()" that works like the normal user-space getname()
function, except with the source coming from kernel memory.
As Oleg points out, this also means that we could drop the tcomm[] array
from 'struct linux_binprm', since the pathname lifetime now covers
setup_new_exec(). That would be a separate cleanup.
Reported-by: Igor Zhbanov <i.zhbanov@samsung.com>
Tested-by: Steven Rostedt <rostedt@goodmis.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Instead of redefining the enums, use the standard ones already
available to avoid the following build errors:
drivers/staging/imx-drm/imx-hdmi.c:56:13: error: nested redefinition of ‘enum hdmi_colorimetry’
drivers/staging/imx-drm/imx-hdmi.c:56:13: error: redeclaration of ‘enum hdmi_colorimetry’
In file included from include/drm/drm_crtc.h:33:0,
from include/drm/drmP.h:710,
from drivers/staging/imx-drm/imx-hdmi.c:24:
include/linux/hdmi.h:48:6: note: originally defined here
Reported-by: Josh Boyer <jwboyer@fedoraproject.org>
Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Cc: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Reviewed-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
There's no reason for this to be a separate function; merge the
two together.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Acked-by: Shawn Guo <shawn.guo@linaro.org>
Tested-by: Shawn Guo <shawn.guo@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
We have the drm_device available, so rather than storing it and then
using the stored version, us the one we already have available to us.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Acked-by: Shawn Guo <shawn.guo@linaro.org>
Tested-by: Shawn Guo <shawn.guo@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
There are a couple of ways to get at the drm_device for the vblank
operations. One of them is via the private imxdrm structure, the
other is via the DRM crtc structure, which also stores a pointer.
Use the DRM method instead of our own method.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Acked-by: Shawn Guo <shawn.guo@linaro.org>
Tested-by: Shawn Guo <shawn.guo@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fix a memory leak in the usb_store_new_id() error paths. When bailing out
due to sanity checks, the function left the already allocated usb_dynid
struct in place. This regression was introduced by the following commits:
c63fe8f6 (usb: core: add sanity checks when using bInterfaceClass with new_id)
1b9fb31f (usb: core: check for valid id_table when using the RefId feature)
52a6966c (usb: core: bail out if user gives an unknown RefId when using new_id)
Detected by Coverity: CID 1162604.
Signed-off-by: Christian Engelmayer <cengelma@gmx.at>
Acked-by: Wolfram Sang <wsa@the-dreams.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Adding two more IDs to the ftdi_sio usb serial driver.
It now connects Tagsys RFID readers.
There might be more IDs out there for other Tagsys models.
Signed-off-by: Ulrich Hahn <uhahn@eanco.de>
Cc: Johan Hovold <johan@hovold.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This device was mentioned in an OpenWRT forum. Seems to have a "standard"
Sierra Wireless ifnumber to function layout:
0: qcdm
2: nmea
3: modem
8: qmi
9: storage
Cc: <stable@vger.kernel.org>
Signed-off-by: Bjørn Mork <bjorn@mork.no>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Setting an empty security context (length=0) on a file will
lead to incorrectly dereferencing the type and other fields
of the security context structure, yielding a kernel BUG.
As a zero-length security context is never valid, just reject
all such security contexts whether coming from userspace
via setxattr or coming from the filesystem upon a getxattr
request by SELinux.
Setting a security context value (empty or otherwise) unknown to
SELinux in the first place is only possible for a root process
(CAP_MAC_ADMIN), and, if running SELinux in enforcing mode, only
if the corresponding SELinux mac_admin permission is also granted
to the domain by policy. In Fedora policies, this is only allowed for
specific domains such as livecd for setting down security contexts
that are not defined in the build host policy.
Reproducer:
su
setenforce 0
touch foo
setfattr -n security.selinux foo
Caveat:
Relabeling or removing foo after doing the above may not be possible
without booting with SELinux disabled. Any subsequent access to foo
after doing the above will also trigger the BUG.
BUG output from Matthew Thode:
[ 473.893141] ------------[ cut here ]------------
[ 473.962110] kernel BUG at security/selinux/ss/services.c:654!
[ 473.995314] invalid opcode: 0000 [#6] SMP
[ 474.027196] Modules linked in:
[ 474.058118] CPU: 0 PID: 8138 Comm: ls Tainted: G D I
3.13.0-grsec #1
[ 474.116637] Hardware name: Supermicro X8ST3/X8ST3, BIOS 2.0
07/29/10
[ 474.149768] task: ffff8805f50cd010 ti: ffff8805f50cd488 task.ti:
ffff8805f50cd488
[ 474.183707] RIP: 0010:[<ffffffff814681c7>] [<ffffffff814681c7>]
context_struct_compute_av+0xce/0x308
[ 474.219954] RSP: 0018:ffff8805c0ac3c38 EFLAGS: 00010246
[ 474.252253] RAX: 0000000000000000 RBX: ffff8805c0ac3d94 RCX:
0000000000000100
[ 474.287018] RDX: ffff8805e8aac000 RSI: 00000000ffffffff RDI:
ffff8805e8aaa000
[ 474.321199] RBP: ffff8805c0ac3cb8 R08: 0000000000000010 R09:
0000000000000006
[ 474.357446] R10: 0000000000000000 R11: ffff8805c567a000 R12:
0000000000000006
[ 474.419191] R13: ffff8805c2b74e88 R14: 00000000000001da R15:
0000000000000000
[ 474.453816] FS: 00007f2e75220800(0000) GS:ffff88061fc00000(0000)
knlGS:0000000000000000
[ 474.489254] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 474.522215] CR2: 00007f2e74716090 CR3: 00000005c085e000 CR4:
00000000000207f0
[ 474.556058] Stack:
[ 474.584325] ffff8805c0ac3c98 ffffffff811b549b ffff8805c0ac3c98
ffff8805f1190a40
[ 474.618913] ffff8805a6202f08 ffff8805c2b74e88 00068800d0464990
ffff8805e8aac860
[ 474.653955] ffff8805c0ac3cb8 000700068113833a ffff880606c75060
ffff8805c0ac3d94
[ 474.690461] Call Trace:
[ 474.723779] [<ffffffff811b549b>] ? lookup_fast+0x1cd/0x22a
[ 474.778049] [<ffffffff81468824>] security_compute_av+0xf4/0x20b
[ 474.811398] [<ffffffff8196f419>] avc_compute_av+0x2a/0x179
[ 474.843813] [<ffffffff8145727b>] avc_has_perm+0x45/0xf4
[ 474.875694] [<ffffffff81457d0e>] inode_has_perm+0x2a/0x31
[ 474.907370] [<ffffffff81457e76>] selinux_inode_getattr+0x3c/0x3e
[ 474.938726] [<ffffffff81455cf6>] security_inode_getattr+0x1b/0x22
[ 474.970036] [<ffffffff811b057d>] vfs_getattr+0x19/0x2d
[ 475.000618] [<ffffffff811b05e5>] vfs_fstatat+0x54/0x91
[ 475.030402] [<ffffffff811b063b>] vfs_lstat+0x19/0x1b
[ 475.061097] [<ffffffff811b077e>] SyS_newlstat+0x15/0x30
[ 475.094595] [<ffffffff8113c5c1>] ? __audit_syscall_entry+0xa1/0xc3
[ 475.148405] [<ffffffff8197791e>] system_call_fastpath+0x16/0x1b
[ 475.179201] Code: 00 48 85 c0 48 89 45 b8 75 02 0f 0b 48 8b 45 a0 48
8b 3d 45 d0 b6 00 8b 40 08 89 c6 ff ce e8 d1 b0 06 00 48 85 c0 49 89 c7
75 02 <0f> 0b 48 8b 45 b8 4c 8b 28 eb 1e 49 8d 7d 08 be 80 01 00 00 e8
[ 475.255884] RIP [<ffffffff814681c7>]
context_struct_compute_av+0xce/0x308
[ 475.296120] RSP <ffff8805c0ac3c38>
[ 475.328734] ---[ end trace f076482e9d754adc ]---
Reported-by: Matthew Thode <mthode@mthode.org>
Signed-off-by: Stephen Smalley <sds@tycho.nsa.gov>
Cc: stable@vger.kernel.org
Signed-off-by: Paul Moore <pmoore@redhat.com>
Decrease the reference count for 'regulators' device_node, obtained by
of_get_child_by_name().
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
Add system-power-controller property to system PMIC, ams AS3722,
node to enable power off functionality through PMIC.
Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com>
Signed-off-by: Stephen Warren <swarren@nvidia.com>
There are a number of revisions of the Dalmore board, each with a variety
of incompatible SW-visible HW changes. The Dalmore DT file in the kernel
only supports HW revision A04. Document this in the DT file.
Reported-by: Paul Walmsley <pwalmsley@nvidia.com>
Signed-off-by: Stephen Warren <swarren@nvidia.com>
Reviewed-by: Thierry Reding <treding@nvidia.com>
Other files and nodes list the resets property after the clocks property
so do the same here for consistency.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Stephen Warren <swarren@nvidia.com>
Add backlight and panel nodes for the PAZ00 TFT LCD panel.
Signed-off-by: Marc Dietrich <marvin24@gmx.de>
Signed-off-by: Stephen Warren <swarren@nvidia.com>
devm_ioremap_resource does sanity checks on the given resource. No need to
duplicate this in the driver.
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Reviewed-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Stephen Warren <swarren@nvidia.com>
The map that is used to allocate anonymous sets is indeed
BITS_PER_BYTE * PAGE_SIZE long.
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
With this patch, the conntrack refcount is initially set to zero and
it is bumped once it is added to any of the list, so we fulfill
Eric's golden rule which is that all released objects always have a
refcount that equals zero.
Andrey Vagin reports that nf_conntrack_free can't be called for a
conntrack with non-zero ref-counter, because it can race with
nf_conntrack_find_get().
A conntrack slab is created with SLAB_DESTROY_BY_RCU. Non-zero
ref-counter says that this conntrack is used. So when we release
a conntrack with non-zero counter, we break this assumption.
CPU1 CPU2
____nf_conntrack_find()
nf_ct_put()
destroy_conntrack()
...
init_conntrack
__nf_conntrack_alloc (set use = 1)
atomic_inc_not_zero(&ct->use) (use = 2)
if (!l4proto->new(ct, skb, dataoff, timeouts))
nf_conntrack_free(ct); (use = 2 !!!)
...
__nf_conntrack_alloc (set use = 1)
if (!nf_ct_key_equal(h, tuple, zone))
nf_ct_put(ct); (use = 0)
destroy_conntrack()
/* continue to work with CT */
After applying the path "[PATCH] netfilter: nf_conntrack: fix RCU
race in nf_conntrack_find_get" another bug was triggered in
destroy_conntrack():
<4>[67096.759334] ------------[ cut here ]------------
<2>[67096.759353] kernel BUG at net/netfilter/nf_conntrack_core.c:211!
...
<4>[67096.759837] Pid: 498649, comm: atdd veid: 666 Tainted: G C --------------- 2.6.32-042stab084.18 #1 042stab084_18 /DQ45CB
<4>[67096.759932] RIP: 0010:[<ffffffffa03d99ac>] [<ffffffffa03d99ac>] destroy_conntrack+0x15c/0x190 [nf_conntrack]
<4>[67096.760255] Call Trace:
<4>[67096.760255] [<ffffffff814844a7>] nf_conntrack_destroy+0x17/0x30
<4>[67096.760255] [<ffffffffa03d9bb5>] nf_conntrack_find_get+0x85/0x130 [nf_conntrack]
<4>[67096.760255] [<ffffffffa03d9fb2>] nf_conntrack_in+0x352/0xb60 [nf_conntrack]
<4>[67096.760255] [<ffffffffa048c771>] ipv4_conntrack_local+0x51/0x60 [nf_conntrack_ipv4]
<4>[67096.760255] [<ffffffff81484419>] nf_iterate+0x69/0xb0
<4>[67096.760255] [<ffffffff814b5b00>] ? dst_output+0x0/0x20
<4>[67096.760255] [<ffffffff814845d4>] nf_hook_slow+0x74/0x110
<4>[67096.760255] [<ffffffff814b5b00>] ? dst_output+0x0/0x20
<4>[67096.760255] [<ffffffff814b66d5>] raw_sendmsg+0x775/0x910
<4>[67096.760255] [<ffffffff8104c5a8>] ? flush_tlb_others_ipi+0x128/0x130
<4>[67096.760255] [<ffffffff8100bc4e>] ? apic_timer_interrupt+0xe/0x20
<4>[67096.760255] [<ffffffff8100bc4e>] ? apic_timer_interrupt+0xe/0x20
<4>[67096.760255] [<ffffffff814c136a>] inet_sendmsg+0x4a/0xb0
<4>[67096.760255] [<ffffffff81444e93>] ? sock_sendmsg+0x13/0x140
<4>[67096.760255] [<ffffffff81444f97>] sock_sendmsg+0x117/0x140
<4>[67096.760255] [<ffffffff8102e299>] ? native_smp_send_reschedule+0x49/0x60
<4>[67096.760255] [<ffffffff81519beb>] ? _spin_unlock_bh+0x1b/0x20
<4>[67096.760255] [<ffffffff8109d930>] ? autoremove_wake_function+0x0/0x40
<4>[67096.760255] [<ffffffff814960f0>] ? do_ip_setsockopt+0x90/0xd80
<4>[67096.760255] [<ffffffff8100bc4e>] ? apic_timer_interrupt+0xe/0x20
<4>[67096.760255] [<ffffffff8100bc4e>] ? apic_timer_interrupt+0xe/0x20
<4>[67096.760255] [<ffffffff814457c9>] sys_sendto+0x139/0x190
<4>[67096.760255] [<ffffffff810efa77>] ? audit_syscall_entry+0x1d7/0x200
<4>[67096.760255] [<ffffffff810ef7c5>] ? __audit_syscall_exit+0x265/0x290
<4>[67096.760255] [<ffffffff81474daf>] compat_sys_socketcall+0x13f/0x210
<4>[67096.760255] [<ffffffff8104dea3>] ia32_sysret+0x0/0x5
I have reused the original title for the RFC patch that Andrey posted and
most of the original patch description.
Cc: Eric Dumazet <edumazet@google.com>
Cc: Andrew Vagin <avagin@parallels.com>
Cc: Florian Westphal <fw@strlen.de>
Reported-by: Andrew Vagin <avagin@parallels.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Acked-by: Andrew Vagin <avagin@parallels.com>
Subsequent changes will require the ACPI core to acquire the lock
protecting the ACPIPHP hotplug contexts, so move the definition of
the lock to the core and change its name to be more generic.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Tested-by: Mika Westerberg <mika.westerberg@linux.intel.com>
There is a slight possibility for the ACPI device object pointed to
by adev in acpi_hotplug_notify_cb() to become invalid between the
acpi_bus_get_device() that it comes from and the subsequent dereference
of that pointer under get_device(). Namely, if acpi_scan_drop_device()
runs in parallel with acpi_hotplug_notify_cb(), acpi_device_del_work_fn()
queued up by it may delete the device object in question right after
a successful execution of acpi_bus_get_device() in acpi_bus_notify().
An analogous problem is present in acpi_bus_notify() where the device
pointer coming from acpi_bus_get_device() may become invalid before
it subsequent dereference in the "if" block.
To prevent that from happening, introduce a new function,
acpi_bus_get_acpi_device(), working analogously to acpi_bus_get_device()
except that it will grab a reference to the ACPI device object returned
by it and it will do that under the ACPICA's namespace mutex. Then,
make both acpi_hotplug_notify_cb() and acpi_bus_notify() use
acpi_bus_get_acpi_device() instead of acpi_bus_get_device() so as to
ensure that the pointers used by them will not become stale at one
point.
In addition to that, introduce acpi_bus_put_acpi_device() as a wrapper
around put_device() to be used along with acpi_bus_get_acpi_device()
and make the (new) users of the latter use acpi_bus_put_acpi_device()
too.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Tested-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Introduce a new function, acpi_get_data_full(), working in analogy
with acpi_get_data() except that it can execute a callback provided
as its 4th argument right after acpi_ns_get_attached_data() has
returned a success.
That will allow Linux to reference count the object pointed to by
*data before the namespace mutex is released so as to ensure that it
will not be freed going forward until the reference to it acquired
by acpi_get_data_full() is dropped.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Tested-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Since hotplug_event() can get the ACPI handle needed for debug
printouts from its context argument, there's no need to pass the
handle to it. Moreover, the second argument's type may be changed
to (struct acpiphp_context *), because that's what is always passed
to hotplug_event() as the second argument anyway.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Tested-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Make hotplug_event() use acpi_handle_debug() instead of an open-coded
debug message printing and clean up the messages printed by it.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Tested-by: Mika Westerberg <mika.westerberg@linux.intel.com>
A few lines of code can be cut from hotplug_event() by defining
and initializing the slot variable at the top of the function,
so do that.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Tested-by: Mika Westerberg <mika.westerberg@linux.intel.com>
