Run savedefconfig over the ppc64, ppc64e and pseries config
Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Using -mcpu=power7 allows gcc to use a number of new instructions
including 64 bit byte reversed loads.
Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
commit f13c13a005 (powerpc: Stop using non-architected shared_proc
field in lppaca) fixed a potential issue with shared/dedicated
partition detection. The old method of detection relied on an
unarchitected field (shared_proc), and this patch switched
to using something architected (a non zero yield_count).
Unfortunately the assertion in the Linux header that yield_count
is only non zero on shared processor partitions is not true. It
turns out dedicated processor partitions can increment yield_count
and as such we falsely detect dedicated partitions as shared.
Fix the comment, and switch back to using the old method.
Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
This patch addresses unaligned single precision floating point loads
and stores in the single-step code. The old implementation
improperly treated an 8 byte structure as an array of two 4 byte
words, which is a classic little endian bug.
Signed-off-by: Tom Musta <tmusta@gmail.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
This patch modifies the unaligned access routines of the sstep.c
module so that it properly reverses the bytes of storage operands
in the little endian kernel kernel. This is implemented by
breaking an unaligned little endian access into a combination of
single byte accesses plus an overal byte reversal operation.
Signed-off-by: Tom Musta <tmusta@gmail.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
This patch enables alignment handling for the load/store floating point
pair instructions (lfdp, lfdpx, stfdp, stfdpx). The handler routine
is properly coded and only needs to be enabled.
Signed-off-by: Tom Musta <tmusta@gmail.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
The alignment handler is incorrect for unaligned string instructions
in little endian mode. These instructions access data as arrays of
bytes and thus are endian neutral. However, the routine also handles
the load/store multiple instructions, which are NOT endian neutral.
This patch toggles the byte swapping flag for the string instructions
in little endian builds. This effectively disables the byte swapping
logic.
Signed-off-by: Tom Musta <tmusta@gmail.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
This issue was causing the QEMU emulated USB device to fail dring
PCI probe.
Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
PPC44x supports page sizes other than 4K however when 64K page sizes
are selected compilation fails. This is due to a change in the
definition of pgtable_t introduced by the following patch:
commit 5c1f6ee9a3
Author: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
powerpc: Reduce PTE table memory wastage
The above patch only implements the new layout for PPC64 so it doesn't
compile for PPC32 with a 64K page size. Ideally we should implement
the same layout for PPC32 however for the meantime this patch reverts
the definition of pgtable_t for PPC32.
Signed-off-by: Alistair Popple <alistair@popple.id.au>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
If you try and build the FA_DUMP code with CONFIG_KEXEC=n, you see
errors such as the following:
arch/powerpc/kernel/fadump.c
408:2: error: 'crashing_cpu' undeclared (first use in this function)
410:2: error: implicit declaration of function 'crash_save_vmcoreinfo'
513:22: error: storage size of 'prstatus' isn't known
520:2: error: implicit declaration of function 'elf_core_copy_kernel_regs'
521:36: error: 'KEXEC_CORE_NOTE_NAME' undeclared (first use in this function)
624:49: error: 'note_buf_t' undeclared (first use in this function)
872:2: error: implicit declaration of function 'paddr_vmcoreinfo_note'
874:18: error: 'vmcoreinfo_max_size' undeclared (first use in this function)
This is because although FA_DUMP doesn't use kexec as the actual reboot
mechanism, it does use parts of the kexec code to assemble/disassemble
the crash image.
Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
This patch fixes typo in comments virtual to physical
address conversion.
Signed-off-by: Vaishnavi Bhat <vaishnavi@linux.vnet.ibm.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Move the few declarations from arch/powerpc/kernel/setup.h
into arch/powerpc/include/asm/setup.h. This resolves a
sparse warning for arch/powerpc/mm/numa.c which defines
do_init_bootmem() but can't include the setup.h header
in the prior path.
Resolves:
arch/powerpc/mm/numa.c:998:13:
warning: symbol 'do_init_bootmem' was not declared.
Should it be static?
Signed-off-by: Robert C Jennings <rcj@linux.vnet.ibm.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Simple fixes for sparse warnings in this file.
Resolves:
arch/powerpc/mm/numa.c:198:24:
warning: Using plain integer as NULL pointer
arch/powerpc/mm/numa.c:1157:5:
warning: symbol 'hot_add_node_scn_to_nid' was not declared.
Should it be static?
arch/powerpc/mm/numa.c:1238:28:
warning: Using plain integer as NULL pointer
arch/powerpc/mm/numa.c:1538:6:
warning: symbol 'topology_schedule_update' was not declared.
Should it be static?
Signed-off-by: Robert C Jennings <rcj@linux.vnet.ibm.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Commit c55aef0e5b ("powerpc/boot: Change the load address for the
wrapper to fit the kernel") adjusts the wrapper address unnecessarily
for platforms that use arch/powerpc/boot/of.c, since the code there
allocates space for the kernel wherever it can find it and doesn't
necessarily load the kernel at address 0. Changing the link address
is actually harmful since it can cause the zImage to overlap with
Open Firmware and thus fail to boot.
To fix this, we set make_space to n for all of the platforms that
use of.o.
Signed-off-by: Paul Mackerras <paulus@samba.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Caused by commit a4da0d50b2 ("powerpc: Implement
arch_get_random_long/int() for powernv") from the powerpc tree
interacting with commit b5b4bb3f6a ("of: only include prom.h on sparc")
from the dt-rh tree.
I added this merge fix patch (which will need to be sent to Linus when
these two trees get merged, or could be applied now to the powerpc tree):
[ Also add linux/smp.h to get cpu_to_chip_id -- BenH ]
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Acked-by: Rob Herring <rob.herring@calxeda.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
DRM_IOCTL_VERSION is a reliable way to get the driver-name and version
information. It's not related to the interface-version (SET_VERSION ioctl)
so we can safely enable it on render-nodes.
Note that gbm uses udev-BUSID to load the correct mesa driver. However,
the VERSION ioctl should be the more reliable way to do this (in case we
add new DRM-bus drivers which have no BUSID or similar).
Signed-off-by: David Herrmann <dh.herrmann@gmail.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Unless task == current ptrace_parent(task) is not safe even under
rcu_read_lock() and most of the current users are not right.
So may_change_ptraced_domain(task) looks wrong as well. However it
is always called with task == current so the code is actually fine.
Remove this argument to make this fact clear.
Note: perhaps we should simply kill ptrace_parent(), it buys almost
nothing. And it is obviously racy, perhaps this should be fixed.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: John Johansen <john.johansen@canonical.com>
The reporting of the parent task info is a vestage from old versions of
apparmor. The need for this information was removed by unique null-
profiles before apparmor was upstreamed so remove this info from logging.
Signed-off-by: John Johansen <john.johansen@canonical.com>
Now that aa_capabile no longer sets the task field it can be removed
and the lsm_audit version of the field can be used.
Signed-off-by: John Johansen <john.johansen@canonical.com>
Mediation is based off of the cred but auditing includes the current
task which may not be related to the actual request.
Signed-off-by: John Johansen <john.johansen@canonical.com>
NIST vectors for CTR mode in testmgr.h assume the entire IV as the counter. To
get correct results that match the output of these vectors, we need to set the
counter length correctly.
Signed-off-by: Joel Fernandes <joelf@ti.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Using a spinlock to atomically increase a counter sounds wrong -- we've
atomic_t for this!
Also move 'seq_nr' to a different cache line than 'lock' to reduce cache
line trashing. This has the nice side effect of decreasing the size of
struct parallel_data from 192 to 128 bytes for a x86-64 build, e.g.
occupying only two instead of three cache lines.
Those changes results in a 5% performance increase on an IPsec test run
using pcrypt.
Btw. the seq_lock spinlock was never explicitly initialized -- one more
reason to get rid of it.
Signed-off-by: Mathias Krause <mathias.krause@secunet.com>
Acked-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
- Earlier interface layers - caamalg, caamhash, caamrng were
directly using the Controller driver private structure to access
the Job ring.
- Changed the above to use alloc/free API's provided by Job Ring Drive
Signed-off-by: Ruchika Gupta <ruchika.gupta@freescale.com>
Reviewed-by: Garg Vakul-B16394 <vakul@freescale.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
With each of the Job Ring available as a platform device, the
Job Ring driver needs to take care of allocation/deallocation
of the Job Rings to the above interface layers. Added APIs
in Job Ring Driver to allocate/free Job rings
Signed-off-by: Ruchika Gupta <ruchika.gupta@freescale.com>
Reviewed-by: Garg Vakul-B16394 <vakul@freescale.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The SEC Job Rings are now available as individual devices.
This would enable sharing of job rings between kernel and
user space. Job Rings can now be dynamically bound/unbound
from kernel.
Changes are made in the following layers of CAAM Driver
1. Controller driver
- Does basic initialization of CAAM Block.
- Creates platform devices for Job Rings.
(Earlier the initialization of Job ring was done
by the controller driver)
2. JobRing Platform driver
- Manages the platform Job Ring devices created
by the controller driver
Signed-off-by: Ruchika Gupta <ruchika.gupta@freescale.com>
Reviewed-by: Garg Vakul-B16394 <vakul@freescale.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This adds a driver for hardware random number generator present
on Qualcomm MSM SoC's.
Signed-off-by: Stanimir Varbanov <svarbanov@mm-sol.com>
Reviewed-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This adds Qualcomm PRNG driver device tree binding documentation
to use as an example in dts trees.
Signed-off-by: Stanimir Varbanov <svarbanov@mm-sol.com>
Reviewed-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This removes the COMMON_CLKDEV kernel configuration
parameter defined in arch/c6x/Kconfig, but used nowhere
in the makefiles and source code.
Signed-off-by: Michael Opdenacker <michael.opdenacker@free-electrons.com>
Signed-off-by: Mark Salter <msalter@redhat.com>
Previously, check_block_count check valid_map with bit data type in common
scenario that sit has all ones or zeros bitmap, it makes low mount performance.
So let's check the special bitmap with integer data type instead of the bit one.
v1-->v2:
o use find_next_{zero_}bit_le for better performance and readable as Jaegeuk
suggested.
o use neat logogram in comment as Gu Zheng suggested.
o search continuous ones or zeros for better performance when checking mixed
bitmap.
Suggested-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
Signed-off-by: Shu Tan <shu.tan@samsung.com>
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
npages_for_summary_flush uses (SUMMARY_SIZE + 1) as the size of a f2fs_summary
while its actual size is SUMMARY_SIZE. So the result sometimes is bigger than
actual number by one, which causes checkpoint can't be written into disk
contiguously, and sometimes summary blocks can't be compacted like they should.
Besides, when writing summary blocks into pages, if remain space in a page
isn't big enough for one f2fs_summary, it will be left unused, current code
seems not to take it into account.
Signed-off-by: Fan Li <fanofcode.li@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
Don't update the slot in "bgmac_dma_rx_skb_for_slot" unless both the
skb alloc and dma mapping are successful; and free the newly allocated
skb if a dma mapping error occurs. This relieves the caller of the need
to deduce/execute the appropriate cleanup action required when an error
occurs.
Signed-off-by: Nathan Hintz <nlhintz@hotmail.com>
Acked-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Calls to mal_enable_eob_irq perform a read-write-modify of a dcr to
enable device irqs which is protected by a spin lock. However calls to
mal_disable_eob_irq do not take the corresponding lock.
This patch resolves the problem by ensuring that calls to
mal_disable_eob_irq also take the lock.
Signed-off-by: Alistair Popple <alistair@popple.id.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch fixes a bug which would trigger the BUG_ON() at
net/core/dev.c:4156. It was found that this was due to continuing
processing in the current poll call even when the call to
napi_reschedule failed, indicating the device was already on the
polling list. This resulted in an extra call to napi_complete which
triggered the BUG_ON().
This patch ensures that we only contine processing rotting packets in
the current mal_poll call if we are not already on the polling list.
Signed-off-by: Alistair Popple <alistair@popple.id.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
Checking if MAC address is valid using is_valid_ether_addr() is already done in
of_get_mac_address(). While at it, reorganize checking so it matches checks in
other drivers.
Signed-off-by: Luka Perkov <luka@openwrt.org>
CC: Alexey Brodkin <Alexey.Brodkin@synopsys.com>
CC: David Miller <davem@davemloft.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Checking if MAC address is valid using is_valid_ether_addr() is already done in
of_get_mac_address().
Signed-off-by: Luka Perkov <luka@openwrt.org>
Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
CC: David Miller <davem@davemloft.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Checking if MAC address is valid using is_valid_ether_addr() is already done in
of_get_mac_address().
Signed-off-by: Luka Perkov <luka@openwrt.org>
Acked-by: David Daney <david.daney@cavium.com>
CC: David Miller <davem@davemloft.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Fast Open currently has a fall back feature to address SYN-data being
dropped but it requires the middle-box to pass on regular SYN retry
after SYN-data. This is implemented in commit aab487435 ("net-tcp:
Fast Open client - detecting SYN-data drops")
However some NAT boxes will drop all subsequent packets after first
SYN-data and blackholes the entire connections. An example is in
commit 356d7d8 "netfilter: nf_conntrack: fix tcp_in_window for Fast
Open".
The sender should note such incidents and fall back to use the regular
TCP handshake on subsequent attempts temporarily as well: after the
second SYN timeouts the original Fast Open SYN is most likely lost.
When such an event recurs Fast Open is disabled based on the number of
recurrences exponentially.
Signed-off-by: Yuchung Cheng <ycheng@google.com>
Signed-off-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Regression and warn fixes for i915.
* tag 'drm-intel-fixes-2013-10-29' of git://people.freedesktop.org/~danvet/drm-intel:
drm/i915: Fix the PPT fdi lane bifurcate state handling on ivb
drm/i915: No LVDS hardware on Intel D410PT and D425KT
drm/i915/dp: workaround BIOS eDP bpp clamping issue
drm/i915: Add HSW CRT output readout support
drm/i915: Add support for pipe_bpp readout
Previously we would use eseqiv on all async ciphers in all cases,
and sync ciphers if we have more than one CPU. This meant that
chainiv is only used in the case of sync ciphers on a UP machine.
As chainiv may aid attackers by making the IV predictable, even
though this risk itself is small, the above usage pattern causes
it to further leak information about the host.
This patch addresses these issues by using eseqiv even if we're
on a UP machine.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Acked-by: Steffen Klassert <steffen.klassert@secunet.com>
Acked-by: David S. Miller <davem@davemloft.net>
Fixes this build error:
In file included from include/asm-generic/gpio.h:13:0,
from include/linux/gpio.h:51,
from include/linux/of_gpio.h:20,
from arch/powerpc/sysdev/ppc4xx_gpio.c:29:
include/linux/gpio/driver.h:85:14: error: 'struct seq_file' declared inside=
parameter list [-Werror]
include/linux/gpio/driver.h:85:14: error: its scope is only this definition=
or declaration, which is probably not what you want [-Werror]
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Fixes this build error on sparc:
In file included from drivers/spi/spi.c:33:0:
include/linux/of_gpio.h: In function 'of_get_named_gpio_flags':
include/linux/of_gpio.h:93:3: error: implicit declaration of function 'desc_to_gpio' [-Werror=implicit-function-declaration]
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
commit 6b3d8145dcfdbbb43f13544e16f44f4574f941dd
"gpiolib: make GPIO_DEVRES depend on GPIOLIB"
breaks builds when device drivers are using devm_gpio*
devres functions without enabling GPIOLIB, relying on
the devres code to be compiled anyway.
Provide stubs so that we get these if we're using the
devres functions without GPIOLIB.
Reported-by: Fengguang Wu <fengguang.wu@intel.com>
Cc: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Current Kconfig allows GPIO_DEVRES to be selected and compiled without
GPIOLIB. This does not make sense anymore since GPIOLIB has become the
exclusive way to deal with GPIOs. This patch makes GPIO_DEVRES available
only if GPIOLIB is selected.
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Unlike UDP or TCP, we do not take the pseudo-header into
account in SCTP checksums. So in case port mapping is the
very same, we do not need to recalculate the whole SCTP
checksum in software, which is very expensive.
Also, similarly as in TCP, take into account when a private
helper mangled the packet. In that case, we also need to
recalculate the checksum even if ports might be same.
Thanks for feedback regarding skb->ip_summed checks from
Julian Anastasov; here's a discussion on these checks for
snat and dnat:
* For snat_handler(), we can see CHECKSUM_PARTIAL from
virtual devices, and from LOCAL_OUT, otherwise it
should be CHECKSUM_UNNECESSARY. In general, in snat it
is more complex. skb contains the original route and
ip_vs_route_me_harder() can change the route after
snat_handler. So, for locally generated replies from
local server we can not preserve the CHECKSUM_PARTIAL
mode. It is an chicken or egg dilemma: snat_handler
needs the device after rerouting (to check for
NETIF_F_SCTP_CSUM), while ip_route_me_harder() wants
the snat_handler() to put the new saddr for proper
rerouting.
* For dnat_handler(), we should not see CHECKSUM_COMPLETE
for SCTP, in fact the small set of drivers that support
SCTP offloading return CHECKSUM_UNNECESSARY on correctly
received SCTP csum. We can see CHECKSUM_PARTIAL from
local stack or received from virtual drivers. The idea is
that SCTP decides to avoid csum calculation if hardware
supports offloading. IPVS can change the device after
rerouting to real server but we can preserve the
CHECKSUM_PARTIAL mode if the new device supports
offloading too. This works because skb dst is changed
before dnat_handler and we see the new device. So, checks
in the 'if' part will decide whether it is ok to keep
CHECKSUM_PARTIAL for the output. If the packet was with
CHECKSUM_NONE, hence we deal with unknown checksum. As we
recalculate the sum for IP header in all cases, it should
be safe to use CHECKSUM_UNNECESSARY. We can forward wrong
checksum in this case (without cp->app). In case of
CHECKSUM_UNNECESSARY, the csum was valid on receive.
Signed-off-by: Daniel Borkmann <dborkman@redhat.com>
Signed-off-by: Julian Anastasov <ja@ssi.bg>
Signed-off-by: Simon Horman <horms@verge.net.au>
