We cap the upper bound of "mtimeout" but since it's signed we should
check for negative values as well. The mistake is harmless. But I have
changed it to unsigned as a cleanup.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
The Device Under Test (DUT) mode is useful for doing certification
testing and so expose this as debugfs option.
This mode is actually special since you can only enter it. Restoring
normal operation means that a HCI Reset is required. The current mode
value gets tracked as a new device flag and when disabling it, the
correct command to reset the controller is sent.
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
For testing purposes expose the default LE connection interval values
via debugfs.
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Enabling and disabling SSP debug mode is useful for development. This
adds a debugfs entry that allows to configure the SSP debug mode.
On purpose this has been implemented as debugfs entry and not a public
API since it is really only useful during testing and development.
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
A TT response may be prepared and sent while the local or
global translation table is getting updated.
The worst case is when one of the tables is accessed after
its content has been recently updated but the metadata
(TTVN/CRC) has not yet. In this case the reader will get a
table content which does not match the TTVN/CRC.
This will lead to an inconsistent state and so to a TT
recovery.
To avoid entering this situation, put a lock around those TT
operations recomputing the metadata and around the TT
Response creation (the latter is the only reader that
accesses the metadata together with the table).
Signed-off-by: Antonio Quartulli <antonio@open-mesh.com>
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
this comment refers to the old batmand codebase and does
not make sense anymore. Remove it
Signed-off-by: Antonio Quartulli <antonio@open-mesh.com>
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
With this patch the functions batadv_send_skb_unicast() and
batadv_send_skb_unicast_4addr() are further refined into
batadv_send_skb_via_tt(), batadv_send_skb_via_tt_4addr() and
batadv_send_skb_via_gw(). This way we avoid any "guessing" about where to send
a packet in the unicast forwarding methods and let the callers decide.
This is going to be useful for the upcoming multicast related patches in
particular.
Further, the return values were polished a little to use the more
appropriate NET_XMIT_* defines.
Signed-off-by: Linus Lüssing <linus.luessing@web.de>
Acked-by: Antonio Quartulli <antonio@meshcoding.com>
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
Signed-off-by: Antonio Quartulli <antonio@meshcoding.com>
AP isolation has to be enabled on one VLAN interface only.
This patch moves the AP isolation attribute to the per-vlan
interface attribute set, enabling it to have a different
value depending on the selected vlan.
Signed-off-by: Antonio Quartulli <antonio@open-mesh.com>
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
Each VLAN can now have its own set of attributes which are
exported through a new subfolder in the sysfs tree.
Each VLAN created on top of a soft_iface will have its own
subfolder.
The subfolder is named "vlan%VID" and it is created inside
the "mesh" sysfs folder belonging to batman-adv.
Attributes corresponding to the untagged LAN are stored in
the root sysfs folder as before.
This patch also creates all the needed macros and data
structures to easily handle new VLAN spacific attributes.
Signed-off-by: Antonio Quartulli <antonio@open-mesh.com>
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
Since batman-adv is now fully VLAN-aware, a proper framework
able to handle per-vlan-interface attributes is needed.
Those attributes will affect the associated VLAN interface
only, rather than the real soft_iface (which would result
in every vlan interface having the same attribute
configuration).
To make the code simpler and easier to extend, attributes
associated to the standalone soft_iface are now treated
like belonging to yet another vlan having a special vid.
This vid is different from the others because it is made up
by all zeros and the VLAN_HAS_TAG bit is not set.
Signed-off-by: Antonio Quartulli <antonio@open-mesh.com>
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
The same IP subnet can be used on different VLANs, therefore
DAT has to differentiate whether the IP to resolve belongs
to one or the other virtual LAN.
To accomplish this task DAT has to deal with the VLAN tag
and store it together with each ARP entry.
Signed-off-by: Antonio Quartulli <antonio@open-mesh.com>
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
The gateway code is now adapted in order to correctly
interact with the Translation Table component by using the
vlan ID
Signed-off-by: Antonio Quartulli <antonio@open-mesh.com>
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
The conn->interval parameter of HCI connections is not used at all
and so just remove it.
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
For LE capable controllers at the special LE features page to the
debugfs list with all the other features pages.
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
This reverts commit ee0f5b390a.
The MAINTAINERS entry was not in alphabetic order.
Assign david.a.cohen@linux.intel.com as maintainer of Intel MID gpio
driver at drivers/gpio/gpio-intel-mid.c. Now do it in
alphabetic order instead.
Signed-off-by: David Cohen <david.a.cohen@linux.intel.com>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
The system can be figured to accept and use debug keys. Expose this
value in debugfs for debugging purposes.
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
For some testing it is important to know the current own addres type,
but also be able to change it. The change is lost over powery cycles
and only intended for debugging.
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
The own address type is based on the fact if the controller has
a public address or not. This means that this detail can be just
configured once during setup phase.
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
For debugging purposes expose the current list of long term keys
via debugfs. This file is read-only and limited to root access.
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Knowing the white list size information is important for
debugging. So export it via debugfs.
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
The bus information are exposed in the actual hierarchy and should
not be exposed as attribute.
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
For debugging purposes expose the current list of link keys via
debugfs. This file is read-only and limited to root access.
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
The class of device debugfs information should be directly exported
from hci_core.c and so move them over there.
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
The local version information from the controller can not change
since they are static. So store them only once during setup
phase and not bother overwriting them every time this command
gets executed.
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Move the debugfs entries for manufacturer, hci_ver and hci_rev into
hci_core.c and use the new helpers for static entries that will not
change at runtime. Once passed the setup procedure, they will stay
fixed.
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
The debug entry for connection features is incomplete and also does
not work with AMP controllers and physical links. So just remove it.
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Some controllers list the max_page value from the extended features
response as 0 when SSP has not yet been enabled. To workaround this
issue, force the max_page value to 1 when SSP support has been
detected.
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Move the handling of HCI device features debugfs into hci_core.c and
also extend it with handling of multiple feature pages.
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
now that each TT entry is characterised by a VLAN ID, the
latter has to be taken into consideration when computing the
local/global table CRC as it would be theoretically possible
to have the same client in two different VLANs
Signed-off-by: Antonio Quartulli <antonio@open-mesh.com>
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
To make the translation table code VLAN-aware, each entry
must carry the VLAN ID which it belongs to. This patch adds
such attribute to the related TT structures.
Signed-off-by: Antonio Quartulli <antonio@open-mesh.com>
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
My university will stop email service for alumni in january 2014, please
use my new e-mail address instead.
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
Fix bogus merge conflict resolution by checking the return
values of the skb preparation routines.
Signed-off-by: Antonio Quartulli <antonio@meshcoding.com>
Fix the following sparse warning:
drivers/staging/rtl8192u/ieee80211/ieee80211_tx.c:240:22: warning: symbol 'ieee80211_alloc_txb' was not declared. Should it be static?
Signed-off-by: Teodora Baluta <teobaluta@gmail.com>
Reviewed-by: Peter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fix checkpatch warning: WARNING: Comparing jiffies is almost always
wrong; prefer time_after, time_before and friends
Signed-off-by: Ashvini Varatharaj <ashvinivaratharaj@gmail.com>
Reviewed-by: Peter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fix checkpatch warning: Comparing jiffies is almost always wrong;
prefer time_after, time_before and friends
Signed-off-by: Ashvini Varatharaj <ashvinivaratharaj@gmail.com>
Reviewed-by: Peter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Do not overwrite the multi-byte fields of usb_wa_descriptor with their
cpu format values after reading the descriptor. Leave the values as
__le16 and swap on use. This is more consistent with other uses of USB
descriptors.
Signed-off-by: Thomas Pugliese <thomas.pugliese@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch serializes access to the HWA data transfer out (DTO)
endpoint. This prevents a situation where two transfer requests being
sent concurrently to separate downstream endpoints could interleave
their transfer request and transfer data packets causing data
corruption. The transfer processing code will now attempt to acquire
the DTO resource before sending a transfer to the HWA. If it cannot
acquire the resource, the RPIPE that the transfer is assigned to will
be placed on a waiting list. When the DTO resource is released, the
actor releasing the resource will serivce the RPIPEs that are waiting.
Signed-off-by: Thomas Pugliese <thomas.pugliese@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
New Drivers
* cm36651 combined RGB light and proximity sensor.
Core improvements
* Some more fixes and cleanups related to buffers. These include the second
half of a series which went is as fixes. The basis for delaying until the
next merge window is that some are too invasive for this late in a cycle
and others only effect code paths current unused in the mainline tree.
In this case we have:
* protecting against concurrent userspace access
* fixing a memory leak if a device goes away
* avoiding always reallocating the buffer whether or not it has changed
(a bug fix, but one with no functional changes other than a small speed
improvement.)
* Add reference counting for buffers to ensure they hang around if open
from userspace or in kernel when the device is forcefully removed.
* Return -ENODEV for buffer access operations when the device has gone
away.
* Add proper locking for iio_update_buffers (currently we only have one
buffer per device in mainline, but an input bridge driver is under
development which would make this bug 'real'.)
* Wake up anyone waiting on a buffer if the device is unregistered. A
subsequent read will fail, notifying userspace that the device is no
longer there rather than having it wait possibly for ever.
* Move the iio_sw_preenable functionality into the core. This avoids drivers
having to 'know' about how the buffers are implemented and is called by
almost all drivers anyway. Those that don't call it are not harmed by it
being called.
* New registration approach for information (i.e. sysfs attributes) about
events. Much more generic and now similar to how the equivalent is
handled for channel information. The events infrastructure had been left
behind by other changes so this brings it back in line.
* Using the new events registration approach, add a hysterisis event_info
element and apply this to those drivers with this property.
* A little unitialized variable bug in the generic_buffer.c example.
* Factor out the code for freeing lists of IIO Device attributes to avoid
some repitition.
Driver cleanups
* At91 driver gains touch screen support and some related fixes.
* Follow up series of patches removing the now redundant
iio_sw_buffer_preenable calls.
* Lots of conversions to the new event registration methods.
* Another round of hmc5843 cleanups as that driver moves towards graduating
from staging.
* Make some SoC drivers buildable if COMPILE_TEST is used. Follow up fixes
for a few bits and bobs that revealed.
* Add explicit includes of linux/of.h to those drivers making us of linux/of.h
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)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=TXhl
-----END PGP SIGNATURE-----
Merge tag 'iio-for-3.12d' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-next
Jonathan writes:
Fourth round of IIO new drivers, functionality and cleanups for the 3.13 cycle.
New Drivers
* cm36651 combined RGB light and proximity sensor.
Core improvements
* Some more fixes and cleanups related to buffers. These include the second
half of a series which went is as fixes. The basis for delaying until the
next merge window is that some are too invasive for this late in a cycle
and others only effect code paths current unused in the mainline tree.
In this case we have:
* protecting against concurrent userspace access
* fixing a memory leak if a device goes away
* avoiding always reallocating the buffer whether or not it has changed
(a bug fix, but one with no functional changes other than a small speed
improvement.)
* Add reference counting for buffers to ensure they hang around if open
from userspace or in kernel when the device is forcefully removed.
* Return -ENODEV for buffer access operations when the device has gone
away.
* Add proper locking for iio_update_buffers (currently we only have one
buffer per device in mainline, but an input bridge driver is under
development which would make this bug 'real'.)
* Wake up anyone waiting on a buffer if the device is unregistered. A
subsequent read will fail, notifying userspace that the device is no
longer there rather than having it wait possibly for ever.
* Move the iio_sw_preenable functionality into the core. This avoids drivers
having to 'know' about how the buffers are implemented and is called by
almost all drivers anyway. Those that don't call it are not harmed by it
being called.
* New registration approach for information (i.e. sysfs attributes) about
events. Much more generic and now similar to how the equivalent is
handled for channel information. The events infrastructure had been left
behind by other changes so this brings it back in line.
* Using the new events registration approach, add a hysterisis event_info
element and apply this to those drivers with this property.
* A little unitialized variable bug in the generic_buffer.c example.
* Factor out the code for freeing lists of IIO Device attributes to avoid
some repitition.
Driver cleanups
* At91 driver gains touch screen support and some related fixes.
* Follow up series of patches removing the now redundant
iio_sw_buffer_preenable calls.
* Lots of conversions to the new event registration methods.
* Another round of hmc5843 cleanups as that driver moves towards graduating
from staging.
* Make some SoC drivers buildable if COMPILE_TEST is used. Follow up fixes
for a few bits and bobs that revealed.
* Add explicit includes of linux/of.h to those drivers making us of linux/of.h
The parser set up is just a generic utility that uses local variables
allocated by the function. There's no need to hold the graph_lock for
this set up.
This also makes the code simpler.
Link: http://lkml.kernel.org/r/1381739066-7531-4-git-send-email-namhyung@kernel.org
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The struct ftrace_graph_data is for generalizing the access to
set_graph_function file. This is a preparation for adding support to
set_graph_notrace.
Link: http://lkml.kernel.org/r/1381739066-7531-3-git-send-email-namhyung@kernel.org
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The ftrace_graph_filter_enabled means that user sets function filter
and it always has same meaning of ftrace_graph_count > 0.
Link: http://lkml.kernel.org/r/1381739066-7531-2-git-send-email-namhyung@kernel.org
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Andrey reported the following report:
ERROR: AddressSanitizer: heap-buffer-overflow on address ffff8800359c99f3
ffff8800359c99f3 is located 0 bytes to the right of 243-byte region [ffff8800359c9900, ffff8800359c99f3)
Accessed by thread T13003:
#0 ffffffff810dd2da (asan_report_error+0x32a/0x440)
#1 ffffffff810dc6b0 (asan_check_region+0x30/0x40)
#2 ffffffff810dd4d3 (__tsan_write1+0x13/0x20)
#3 ffffffff811cd19e (ftrace_regex_release+0x1be/0x260)
#4 ffffffff812a1065 (__fput+0x155/0x360)
#5 ffffffff812a12de (____fput+0x1e/0x30)
#6 ffffffff8111708d (task_work_run+0x10d/0x140)
#7 ffffffff810ea043 (do_exit+0x433/0x11f0)
#8 ffffffff810eaee4 (do_group_exit+0x84/0x130)
#9 ffffffff810eafb1 (SyS_exit_group+0x21/0x30)
#10 ffffffff81928782 (system_call_fastpath+0x16/0x1b)
Allocated by thread T5167:
#0 ffffffff810dc778 (asan_slab_alloc+0x48/0xc0)
#1 ffffffff8128337c (__kmalloc+0xbc/0x500)
#2 ffffffff811d9d54 (trace_parser_get_init+0x34/0x90)
#3 ffffffff811cd7b3 (ftrace_regex_open+0x83/0x2e0)
#4 ffffffff811cda7d (ftrace_filter_open+0x2d/0x40)
#5 ffffffff8129b4ff (do_dentry_open+0x32f/0x430)
#6 ffffffff8129b668 (finish_open+0x68/0xa0)
#7 ffffffff812b66ac (do_last+0xb8c/0x1710)
#8 ffffffff812b7350 (path_openat+0x120/0xb50)
#9 ffffffff812b8884 (do_filp_open+0x54/0xb0)
#10 ffffffff8129d36c (do_sys_open+0x1ac/0x2c0)
#11 ffffffff8129d4b7 (SyS_open+0x37/0x50)
#12 ffffffff81928782 (system_call_fastpath+0x16/0x1b)
Shadow bytes around the buggy address:
ffff8800359c9700: fd fd fd fd fd fd fd fd fd fd fd fd fd fd fd fd
ffff8800359c9780: fd fd fd fd fd fd fd fd fa fa fa fa fa fa fa fa
ffff8800359c9800: fa fa fa fa fa fa fa fa fa fa fa fa fa fa fa fa
ffff8800359c9880: fa fa fa fa fa fa fa fa fa fa fa fa fa fa fa fa
ffff8800359c9900: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
=>ffff8800359c9980: 00 00 00 00 00 00 00 00 00 00 00 00 00 00[03]fb
ffff8800359c9a00: fa fa fa fa fa fa fa fa fa fa fa fa fa fa fa fa
ffff8800359c9a80: fa fa fa fa fa fa fa fa fa fa fa fa fa fa fa fa
ffff8800359c9b00: fa fa fa fa fa fa fa fa 00 00 00 00 00 00 00 00
ffff8800359c9b80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
ffff8800359c9c00: 00 00 00 00 00 00 00 00 fa fa fa fa fa fa fa fa
Shadow byte legend (one shadow byte represents 8 application bytes):
Addressable: 00
Partially addressable: 01 02 03 04 05 06 07
Heap redzone: fa
Heap kmalloc redzone: fb
Freed heap region: fd
Shadow gap: fe
The out-of-bounds access happens on 'parser->buffer[parser->idx] = 0;'
Although the crash happened in ftrace_regex_open() the real bug
occurred in trace_get_user() where there's an incrementation to
parser->idx without a check against the size. The way it is triggered
is if userspace sends in 128 characters (EVENT_BUF_SIZE + 1), the loop
that reads the last character stores it and then breaks out because
there is no more characters. Then the last character is read to determine
what to do next, and the index is incremented without checking size.
Then the caller of trace_get_user() usually nulls out the last character
with a zero, but since the index is equal to the size, it writes a nul
character after the allocated space, which can corrupt memory.
Luckily, only root user has write access to this file.
Link: http://lkml.kernel.org/r/20131009222323.04fd1a0d@gandalf.local.home
Reported-by: Andrey Konovalov <andreyknvl@google.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
configs. Here's a fix for that on top of the pinctrl
changes already merged with the signed tag
omap-for-v3.13/quirk-signed.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.15 (GNU/Linux)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=KNnl
-----END PGP SIGNATURE-----
Merge tag 'omap-for-v3.13/pinctrl-fix' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/dt
From Tony Lindgren:
Looks like I managed to break the x86 build for some
configs. Here's a fix for that on top of the pinctrl
changes already merged with the signed tag
omap-for-v3.13/quirk-signed.
* tag 'omap-for-v3.13/pinctrl-fix' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
pinctrl: single: Fix build when not built on ARM
Signed-off-by: Olof Johansson <olof@lixom.net>
