Start a ROC on the AP channel beforing sending the authentication reply
to a connecting STA. This ROC is held up to 1 second via a timer. If the
station is authorized and added by mac80211, the ROC is extended until
the station is fully authorized.
We make sure not to ROC twice when several stations are connecting in
parallel and to only release the ROC when both the pending-reply timer
and the STA-state callbacks do not require it.
Signed-off-by: Arik Nemtsov <arik@wizery.com>
Signed-off-by: Eliad Peller <eliad@wizery.com>
Signed-off-by: Luciano Coelho <luciano.coelho@intel.com>
Pull assorted vfs fixes from Al Viro:
"A couple of bug fixes + removal of dead code in afs ->d_revalidate()"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
afs: dget_parent() can't return a negative dentry
ocfs2: needs ->d_lock to poke in ->d_parent->d_inode from ->d_revalidate()
sysv: Add forgotten superblock lock init for v7 fs
Since the patch "cpufreq: cpufreq-cpu0: NULL is a valid regulator", cpu_reg
contains an error value if the regulator is not set, instead of NULL.
Accordingly, fix the remaining check for non-NULL cpu_reg.
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
'clk_round_rate' returns a negative error code upon failure. This
will never get detected by unsigned 'newfreq'. Make it signed.
Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Use kobject_init_and_add() since we have nothing special to do between
kobject_init() and kobject_add().
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
kobject_add() sets the parent pointer, so we don't need to do it
explicitly.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Set the kobject name via kobject_add() instead of using kobject_set_name(),
which is deprecated per Documentation/kobject.txt.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
cpu_hotplug_driver_lock() serializes CPU online/offline operations
when ARCH_CPU_PROBE_RELEASE is set. This lock interface is no longer
necessary with the following reason:
- lock_device_hotplug() now protects CPU online/offline operations,
including the probe & release interfaces enabled by
ARCH_CPU_PROBE_RELEASE. The use of cpu_hotplug_driver_lock() is
redundant.
- cpu_hotplug_driver_lock() is only valid when ARCH_CPU_PROBE_RELEASE
is defined, which is misleading and is only enabled on powerpc.
This patch removes the cpu_hotplug_driver_lock() interface. As
a result, ARCH_CPU_PROBE_RELEASE only enables / disables the cpu
probe & release interface as intended. There is no functional change
in this patch.
Signed-off-by: Toshi Kani <toshi.kani@hp.com>
Reviewed-by: Nathan Fontenot <nfont@linux.vnet.ibm.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
This patch only introduces indentation cleanups. No functional changes.
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
This (trivial) patch:
1. Deletes duplicate Kconfig dependency as there is "if IPMI_HANDLER"
around "IPMI_SI".
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Reviewed-by: Huang Ying <ying.huang@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
This (trivial) patch:
1. Deletes several useless header inclusions.
2. Kernel codes should always include <linux/acpi.h> instead of
<acpi/acpi_bus.h> or <acpi/acpi_drivers.h> where many conditional
declarations are handled.
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Reviewed-by: Huang Ying <ying.huang@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
This (trivial) patch.
1. Changes dynamic mutex initialization to static initialization.
2. Removes one acpi_ipmi_init() variable initialization as it is not
needed.
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Reviewed-by: Huang Ying <ying.huang@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
This (trivial) patch:
1. Deletes a member of the acpi_ipmi_device, smi_data, which is not
actually used.
2. Updates a member of the acpi_ipmi_device, pnp_dev, which is only used
by dev_warn() invocations, so changes it to a struct device.
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Reviewed-by: Huang Ying <ying.huang@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
This patch adds reference counting for ACPI IPMI transfers to tune the
locking granularity of tx_msg_lock.
This patch also makes the whole acpi_ipmi module's coding style consistent
by using reference counting for all its objects (i.e., acpi_ipmi_device and
acpi_ipmi_msg).
The acpi_ipmi_msg handling is re-designed using referece counting.
1. tx_msg is always unlinked before complete(), so that it is safe to put
complete() out side of tx_msg_lock.
2. tx_msg reference counters are incremented before calling
ipmi_request_settime() and tx_msg_lock protection is added to
ipmi_cancel_tx_msg() so that a complete() can be safely called in
parellel with tx_msg unlinking in failure cases.
3. tx_msg holds a reference to acpi_ipmi_device so that it can be flushed
and freed in the contexts other than acpi_ipmi_space_handler().
The lockdep_chains shows all acpi_ipmi locks are leaf locks after the
tuning:
1. ipmi_lock is always leaf:
irq_context: 0
[ffffffff81a943f8] smi_watchers_mutex
[ffffffffa06eca60] driver_data.ipmi_lock
irq_context: 0
[ffffffff82767b40] &buffer->mutex
[ffffffffa00a6678] s_active#103
[ffffffffa06eca60] driver_data.ipmi_lock
2. without this patch applied, lock used by complete() is held after
holding tx_msg_lock:
irq_context: 0
[ffffffff82767b40] &buffer->mutex
[ffffffffa00a6678] s_active#103
[ffffffffa06ecce8] &(&ipmi_device->tx_msg_lock)->rlock
irq_context: 1
[ffffffffa06ecce8] &(&ipmi_device->tx_msg_lock)->rlock
irq_context: 1
[ffffffffa06ecce8] &(&ipmi_device->tx_msg_lock)->rlock
[ffffffffa06eccf0] &x->wait#25
irq_context: 1
[ffffffffa06ecce8] &(&ipmi_device->tx_msg_lock)->rlock
[ffffffffa06eccf0] &x->wait#25
[ffffffff81e36620] &p->pi_lock
irq_context: 1
[ffffffffa06ecce8] &(&ipmi_device->tx_msg_lock)->rlock
[ffffffffa06eccf0] &x->wait#25
[ffffffff81e36620] &p->pi_lock
[ffffffff81e5d0a8] &rq->lock
3. with this patch applied, tx_msg_lock is always leaf:
irq_context: 0
[ffffffff82767b40] &buffer->mutex
[ffffffffa00a66d8] s_active#107
[ffffffffa07ecdc8] &(&ipmi_device->tx_msg_lock)->rlock
irq_context: 1
[ffffffffa07ecdc8] &(&ipmi_device->tx_msg_lock)->rlock
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Reviewed-by: Huang Ying <ying.huang@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
It is found on a real machine, in its ACPI namespace, the IPMI
OperationRegions (in the ACPI000D - ACPI power meter) are not defined under
the IPMI system interface device (the IPI0001 with KCS type returned from
_IFT control method):
Device (PMI0)
{
Name (_HID, "ACPI000D") // _HID: Hardware ID
OperationRegion (SYSI, IPMI, 0x0600, 0x0100)
Field (SYSI, BufferAcc, Lock, Preserve)
{
AccessAs (BufferAcc, 0x01),
Offset (0x58),
SCMD, 8,
GCMD, 8
}
OperationRegion (POWR, IPMI, 0x3000, 0x0100)
Field (POWR, BufferAcc, Lock, Preserve)
{
AccessAs (BufferAcc, 0x01),
Offset (0xB3),
GPMM, 8
}
}
Device (PCI0)
{
Device (ISA)
{
Device (NIPM)
{
Name (_HID, EisaId ("IPI0001")) // _HID: Hardware ID
Method (_IFT, 0, NotSerialized) // _IFT: IPMI Interface Type
{
Return (0x01)
}
}
}
}
Current ACPI_IPMI code registers IPMI operation region handler on a
per-device basis, so for the above namespace the IPMI operation region
handler is registered only under the scope of \_SB.PCI0.ISA.NIPM. Thus
when an IPMI operation region field of \PMI0 is accessed, there are errors
reported on such platform:
ACPI Error: No handlers for Region [IPMI]
ACPI Error: Region IPMI(7) has no handler
The solution is to install an IPMI operation region handler from root node
so that every object that defines IPMI OperationRegion can get an address
space handler registered.
When an IPMI operation region field is accessed, the Network Function
(0x06 for SYSI and 0x30 for POWR) and the Command (SCMD, GCMD, GPMM) are
passed to the operation region handler, there is no system interface
specified by the BIOS. The patch tries to select one system interface by
monitoring the system interface notification. IPMI messages passed from
the ACPI codes are sent to this selected global IPMI system interface.
The ACPI_IPMI will always select the first registered IPMI interface
with an ACPI handle (i.e., defined in the ACPI namespace). It's hard to
determine the selection when there are multiple IPMI system interfaces
defined in the ACPI namespace. According to the IPMI specification:
A BMC device may make available multiple system interfaces, but only one
management controller is allowed to be 'active' BMC that provides BMC
functionality for the system (in case of a 'partitioned' system, there
can be only one active BMC per partition). Only the system interface(s)
for the active BMC allowed to respond to the 'Get Device Id' command.
According to the ipmi_si desigin:
The ipmi_si registeration notifications can only happen after a
successful "Get Device ID" command.
Thus it should be OK for non-partitioned systems to do such selection.
However, we do not have much knowledge on 'partitioned' systems.
References: https://bugzilla.kernel.org/show_bug.cgi?id=46741
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Reviewed-by: Huang Ying <ying.huang@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
This patch uses reference counting to fix the race caused by the
unprotected ACPI IPMI user.
There are two rules for using the ipmi_si APIs:
1. In ipmi_si, ipmi_destroy_user() can ensure that no ipmi_recv_msg will
be passed to ipmi_msg_handler(), but ipmi_request_settime() can not
use an invalid ipmi_user_t. This means the ipmi_si users must ensure
that there won't be any local references on ipmi_user_t before invoking
ipmi_destroy_user().
2. In ipmi_si, the smi_gone()/new_smi() callbacks are protected by
smi_watchers_mutex, so their execution is serialized. But as a
new smi can re-use a freed intf_num, it requires that the callback
implementation must not use intf_num as an identification mean or it
must ensure all references to the previous smi are all dropped before
exiting smi_gone() callback.
As the acpi_ipmi_device->user_interface check in acpi_ipmi_space_handler()
can happen before setting user_interface to NULL and codes after the check
in acpi_ipmi_space_handler() can happen after user_interface becomes NULL,
the on-going acpi_ipmi_space_handler() still can pass an invalid
acpi_ipmi_device->user_interface to ipmi_request_settime(). Such race
conditions are not allowed by the IPMI layer's API design as a crash will
happen in ipmi_request_settime() if something like that happens.
This patch follows the ipmi_devintf.c design:
1. Invoke ipmi_destroy_user() after the reference count of
acpi_ipmi_device drops to 0. References of acpi_ipmi_device dropping
to 0 also means tx_msg related to this acpi_ipmi_device are all freed.
This matches the IPMI layer's API calling rule on ipmi_destroy_user()
and ipmi_request_settime().
2. ipmi_flush_tx_msg() is performed so that no on-going tx_msg can still be
running in acpi_ipmi_space_handler(). And it is invoked after invoking
__ipmi_dev_kill() where acpi_ipmi_device is deleted from the list with a
"dead" flag set, and the "dead" flag check is also introduced to the
point where a tx_msg is going to be added to the tx_msg_list so that no
new tx_msg can be created after returning from the __ipmi_dev_kill().
3. The waiting codes in ipmi_flush_tx_msg() is deleted because it is not
required since this patch ensures no acpi_ipmi reference is still held
for ipmi_user_t before calling ipmi_destroy_user() and
ipmi_destroy_user() can ensure no more ipmi_msg_handler() can happen
after returning from ipmi_destroy_user().
4. The flushing of tx_msg is also moved out of ipmi_lock in this patch.
The forthcoming IPMI operation region handler installation changes also
requires acpi_ipmi_device be handled in this style.
The header comment of the file is also updated due to this design change.
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Reviewed-by: Huang Ying <ying.huang@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
This patch fixes races caused by timed out ACPI IPMI transfers.
This patch uses timeout mechanism provided by ipmi_si to avoid the race
that the msg_done flag is set but without any protection, its content can
be invalid. Thanks for the suggestion of Corey Minyard.
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Reviewed-by: Huang Ying <ying.huang@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
This patch fixes races caused by unprotected ACPI IPMI transfers.
We can see that the following crashes may occur:
1. There is no tx_msg_lock held for iterating tx_msg_list in
ipmi_flush_tx_msg() while it may be unlinked on failure in
parallel in acpi_ipmi_space_handler() under tx_msg_lock.
2. There is no lock held for freeing tx_msg in acpi_ipmi_space_handler()
while it may be accessed in parallel in ipmi_flush_tx_msg() and
ipmi_msg_handler().
This patch enhances tx_msg_lock to protect all tx_msg accesses to solve
this issue. Then tx_msg_lock is always held around complete() and tx_msg
accesses.
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Reviewed-by: Huang Ying <ying.huang@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
This patch enhances sanity checks on message size to avoid potential buffer
overflow.
The kernel IPMI message size is IPMI_MAX_MSG_LENGTH(272 bytes) while the
ACPI specification defined IPMI message size is 64 bytes. The difference
is not handled by the original codes. This may cause crash in the response
handling codes.
This patch closes this gap and also combines rx_data/tx_data to use single
data/len pair since they need not be seperate.
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Reviewed-by: Huang Ying <ying.huang@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Recent commit 8fd37a4 (PM / hibernate: Create memory bitmaps after
freezing user space) broke the resume part of the user space driven
hibernation (s2disk), because I forgot that the resume utility
loaded the image into memory without freezing user space (it still
freezes tasks after loading the image). This means that during user
space driven resume we need to create the memory bitmaps at the
"device open" time rather than at the "freeze tasks" time, so make
that happen (that's a special case anyway, so it needs to be treated
in a special way).
Reported-and-tested-by: Ronald <ronald645@gmail.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Pull AVR32 fixes from Hans-Christian Egtvedt.
Fix build warnings and use the Kbuild infrastructure for generic headers
rather than doing it by hand.
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/egtvedt/linux-avr32:
avr32: cast syscall_return to silence compiler warning
avr32: fix clockevents kernel warning
avr32: use Kbuild infrastructure to handle the asm-generic headers
Pull S+core fixes from Lennox Wu:
"These updates include updating information of maintainers, fix some
trivial errors, and add a necessary function for supporting ipv6"
* tag 'for-linus-20130929' of git://github.com/sctscore/official-linux:
Score: Update the information of Score maintaners
Score: Modify the Makefile of Score, remove -mlong-calls for compiling
Score: Implement the function csum_ipv6_magic
Score: The commit is for compiling successfully
Use devm_regulator_register() to make cleanup paths simpler,
and remove unnecessary remove().
Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Reviewed-by: Axel Lin <axel.lin@ingics.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
Use devm_regulator_register() to make cleanup paths simpler,
and remove unnecessary remove().
Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
Use devm_regulator_register() to make cleanup paths simpler.
Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Acked-by: Pawel Moll <pawel.moll@arm.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
Use devm_regulator_register() to make cleanup paths simpler.
Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Acked-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
Use devm_regulator_register() to make cleanup paths simpler,
and remove unnecessary remove().
Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Mark Brown <broonie@linaro.org>
Use devm_regulator_register() to make cleanup paths simpler,
and remove unnecessary remove().
Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
Use devm_regulator_register() to make cleanup paths simpler,
and remove unnecessary remove().
Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
Use devm_regulator_register() to make cleanup paths simpler,
and remove unnecessary remove().
Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
Use devm_regulator_register() to make cleanup paths simpler,
and remove unnecessary remove().
Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
Use devm_regulator_register() to make cleanup paths simpler,
and remove unnecessary remove().
Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
Use devm_regulator_register() to make cleanup paths simpler,
and remove unnecessary remove().
Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
Use devm_regulator_register() to make cleanup paths simpler.
Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
Use devm_regulator_register() to make cleanup paths simpler,
and remove unnecessary remove().
Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
Use devm_regulator_register() to make cleanup paths simpler.
Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Mark Brown <broonie@linaro.org>
dev_ prints are already prefixed by ": " before format string so there is no
need for extra spaces.
Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
Like we are doing on DDR0 we need to cleanly shutdown DDR1 if it is
used before rebooting.
If DDR1 is not initialized, we check it and avoid dereferencing its address.
Even by adding two more instructions, we are able to complete the procedure
within a single cache line.
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
Change my email to kernel.org which is easier for me to catch.
Signed-off-by: Barry Song <Baohua.Song@csr.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
Take more drivers into maintain list of CSR SiRF SoC machines.
Signed-off-by: Barry Song <Baohua.Song@csr.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
HWMOD removal for MMC is breaking edma_start as the events are being manually
triggered due to unused channel list not being clear.
The above issue is fixed by reading the "dmas" property from the DT node if it
exists and clearing the bits in the unused channel list if the dma controller
used by any device is EDMA. For this purpose we use the of_* helpers to parse
the arguments in the dmas phandle list.
Also introduced is a minor clean up of a checkpatch error in old code.
Reviewed-by: Sekhar Nori <nsekhar@ti.com>
Reported-by: Balaji T K <balajitk@ti.com>
Cc: Sekhar Nori <nsekhar@ti.com>
Cc: Tony Lindgren <tony@atomide.com>
Cc: Olof Johansson <olof@lixom.net>
Cc: Nishanth Menon <nm@ti.com>
Cc: Pantel Antoniou <panto@antoniou-consulting.com>
Cc: Jason Kridner <jkridner@beagleboard.org>
Cc: Koen Kooi <koen@dominion.thruhere.net>
Signed-off-by: Joel Fernandes <joelf@ti.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
On the TC2 testchip, when all CPUs in a cluster enter standbywfi
and commit a power down request, the power controller will wait
for standbywfil2 coming from L2 cache controller to shut the
cluster down.
By the time all CPUs in a cluster commit a power down request
and enter wfi, the power controller cannot backtrack, or put it
another way, a CPU must not be allowed to complete execution
independently of the power controller, the only way for it to
resume properly must be upon wake-up IRQ pending and subsequent
reset triggered from the power controller.
Current MCPM back-end for TC2 disables the GIC CPU IF only when
power down is committed through the tc2_pm_suspend() method, that
makes sense since a suspended CPU is still online and can receive
interrupts whereas a hotplugged CPU, since it is offline,
migrated all IRQs and shutdown the per-CPU peripherals, hence
their PPIs.
The flaw with this reasoning is the following. If all CPUs in
a clusters are entering a power down state either through CPU
idle or CPU hotplug, when the last man successfully completes
the MCPM power down sequence (and executes wfi), power controller
waits for L2 wfi signal to quiesce the cluster and shut it down.
If, when all CPUs are sitting in wfi, an online CPU hotplugs back
in one of the CPUs in the cluster being shutdown, that CPU
receives an IPI that causes wfi to complete (since tc2_pm_down()
method does not disable the GIC CPU IF in that case - CPU being
hotplugged out, not idle) and the power controller will never see
the stanbywfil2 signal coming from L2 that is required for
shutdown to happen and the system deadlocks.
Further to this issue, kexec hotplugs secondary CPUs out during
kernel reload/restart.
Because kexec may (deliberately) trash the old kernel text, it is
not OK for CPUs to follow the MCPM soft reboot path, since
instructions after the WFI may have been replaced by kexec.
If tc2_pm_down() does not disable the GIC cpu interface, there is a
race between CPU powerdown in the old kernel and the IPI from the
new kernel that triggers secondary boot, particularly if the
powerdown is slow (due to L2 cache cleaning for example). If the
new kernel wins the race, the affected CPU(s) will not really be
reset and may execute garbage after the WFI.
The only solution to this problem consists in disabling the GIC
CPU IF on a CPU committed to power down regardless of the power
down entry method (CPU hotplug or CPU idle). This way, CPU wake-up
is under power controller control, which prevents unexpected wfi
exit caused by a pending IRQ.
This patch moves the GIC CPU IF disable call in the TC2 MCPM
implementation from the tc2_pm_suspend() method to the
tc2_pm_down() method to fix the mentioned race condition(s).
Reviewed-by: Dave Martin <Dave.Martin@arm.com>
Tested-by: Dave Martin <Dave.Martin@arm.com> (for kexec)
Signed-off-by: Sudeep KarkadaNagesha <sudeep.karkadanagesha@arm.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Acked-by: Nicolas Pitre <nico@linaro.org>
Signed-off-by: Olof Johansson <olof@lixom.net>
* Remove unused #gpio-ranges-cells DT property
* Remove usage of deprecated #gpio-range-cells DT property
from GPIO R-Car
Property was deprecated in v3.11-rc2
* Correct ether pinctl naming for armadillo800eva board
Regression introduced in v3.10-rc5
* Add Micrel KSZ8041 PHY fixup to lager board
This resolves a problem that has been present since 3.11-rc2
* Update SDHI DT compatibility string to the <unit>-<soc> format
This makes compatibility strings consistent across all renesas
hardware which currently supports DT.
The bindings which are being updated where intorodiced on
a per-SoC basis starting in v3.8-rc7. They may have
been internally consistent when originally added.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.14 (GNU/Linux)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=WVMt
-----END PGP SIGNATURE-----
Merge tag 'renesas-fixes4-for-v3.12' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into fixes
From Simon Horman:
Fourth Round of Renesas ARM based SoC fixes for v3.12
* Remove unused #gpio-ranges-cells DT property
* Remove usage of deprecated #gpio-range-cells DT property
from GPIO R-Car
Property was deprecated in v3.11-rc2
* Correct ether pinctl naming for armadillo800eva board
Regression introduced in v3.10-rc5
* Add Micrel KSZ8041 PHY fixup to lager board
This resolves a problem that has been present since 3.11-rc2
* Update SDHI DT compatibility string to the <unit>-<soc> format
This makes compatibility strings consistent across all renesas
hardware which currently supports DT.
The bindings which are being updated where intorodiced on
a per-SoC basis starting in v3.8-rc7. They may have
been internally consistent when originally added.
* tag 'renesas-fixes4-for-v3.12' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
ARM: shmobile: Remove #gpio-ranges-cells DT property
gpio: rcar: Remove #gpio-range-cells DT property usage
ARM: shmobile: armadillo: fixup ether pinctrl naming
ARM: shmobile: Lager: add Micrel KSZ8041 PHY fixup
ARM: shmobile: update SDHI DT compatibility string to the <unit>-<soc> format
Signed-off-by: Olof Johansson <olof@lixom.net>
the current dts is lacking interrupt and dma prop for video input
processor of prima2 and atlas6, this patch fixes it.
Signed-off-by: Renwei Wu <Renwei.Wu@csr.com>
Signed-off-by: Barry Song <Baohua.Song@csr.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
we lost an address range <0x56000000 0x56000000 0x1b00000> for peri-iobg
of prima2.
Signed-off-by: Barry Song <Baohua.Song@csr.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
Makefile missed to include atlas6-evb.dtb for ARCH_ATLAS6.
Signed-off-by: Barry Song <Baohua.Song@csr.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
sirf uart and usp-based uart driver with full dma support has
hit 3.12, here we fix the fifosize, dma channels for some HW
prop.
Signed-off-by: Qipan Li <Qipan.Li@csr.com>
Signed-off-by: Barry Song <Baohua.Song@csr.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
