Create a generic version of ablk_helper so it can be reused
by other architectures.
Acked-by: Jussi Kivilinna <jussi.kivilinna@iki.fi>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Stephan Mueller reported to me recently a error in random number generation in
the ansi cprng. If several small requests are made that are less than the
instances block size, the remainder for loop code doesn't increment
rand_data_valid in the last iteration, meaning that the last bytes in the
rand_data buffer gets reused on the subsequent smaller-than-a-block request for
random data.
The fix is pretty easy, just re-code the for loop to make sure that
rand_data_valid gets incremented appropriately
Signed-off-by: Neil Horman <nhorman@tuxdriver.com>
Reported-by: Stephan Mueller <stephan.mueller@atsec.com>
CC: Stephan Mueller <stephan.mueller@atsec.com>
CC: Petr Matousek <pmatouse@redhat.com>
CC: Herbert Xu <herbert@gondor.apana.org.au>
CC: "David S. Miller" <davem@davemloft.net>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Following commit f5b38c5 "crypto: tegra - use kernel entropy instead
of ad-hoc", this function is no longer used. It's also only accurate
for Tegra20 and not later SoCs. So, remove it.
Signed-off-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
devm_clk_get is device managed and makes code simpler.
Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
'dd' is tested for NULL. However, it is derefenced in the error
message print. Change the print to pr_err to avoid this.
Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
'tegra_aes_cra_exit' is used only in this file.
Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Cc: Stephen Warren <swarren@wwwdotorg.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Local symbols used only in this file are made static.
Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Cc: Dmitry Kasatkin <dmitry.kasatkin@nokia.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Local symbols used only in this file are made static.
Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Cc: Sebastian Andrzej Siewior <sebastian@breakpoint.cc>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
KMap the buffers before copying trailing bytes during hmac into a session
temporary buffer. This is required if pinned buffer from user-space is send
during hmac and is safe even if hmac request is generated from within kernel.
Signed-off-by: Yashpal Dutta <yashpal.dutta@freescale.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Here are a number of small staging tree and iio driver fixes. Nothing major,
just lots of little things.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.19 (GNU/Linux)
iEYEABECAAYFAlJAdRIACgkQMUfUDdst+ymS6QCfYTqZCbIvEbdSmkbaVFkMDsoE
J4gAoKeQAL9ltn1fh65XDKlQSwLJaML3
=USmd
-----END PGP SIGNATURE-----
Merge tag 'staging-3.12-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging
Pull staging fixes from Greg KH:
"Here are a number of small staging tree and iio driver fixes. Nothing
major, just lots of little things"
* tag 'staging-3.12-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (34 commits)
iio:buffer_cb: Add missing iio_buffer_init()
iio: Prevent race between IIO chardev opening and IIO device free
iio: fix: Keep a reference to the IIO device for open file descriptors
iio: Stop sampling when the device is removed
iio: Fix crash when scan_bytes is computed with active_scan_mask == NULL
iio: Fix mcp4725 dev-to-indio_dev conversion in suspend/resume
iio: Fix bma180 dev-to-indio_dev conversion in suspend/resume
iio: Fix tmp006 dev-to-indio_dev conversion in suspend/resume
iio: iio_device_add_event_sysfs() bugfix
staging: iio: ade7854-spi: Fix return value
staging:iio:hmc5843: Fix measurement conversion
iio: isl29018: Fix uninitialized value
staging:iio:dummy fix kfifo_buf kconfig dependency issue if kfifo modular and buffer enabled for built in dummy driver.
iio: at91: fix adc_clk overflow
staging: line6: add bounds check in snd_toneport_source_put()
Staging: comedi: Fix dependencies for drivers misclassified as PCI
staging: r8188eu: Adjust RX gain
staging: r8188eu: Fix smatch warning in core/rtw_ieee80211.
staging: r8188eu: Fix smatch error in core/rtw_mlme_ext.c
staging: r8188eu: Fix Smatch off-by-one warning in hal/rtl8188e_hal_init.c
...
Here are a number of small USB fixes for 3.12-rc2.
One is a revert of a EHCI change that isn't quite ready for 3.12. Others are
minor things, gadget fixes, Kconfig fixes, and some quirks and documentation
updates.
All have been in linux-next for a bit.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.19 (GNU/Linux)
iEYEABECAAYFAlJAapIACgkQMUfUDdst+yksHQCfeYJVtsWa5aG1OgLGmVC7HzGW
SNMAniUFk9Cg9AazfBNfURsfuucEmv6w
=kf93
-----END PGP SIGNATURE-----
Merge tag 'usb-3.12-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB fixes from Greg KH:
"Here are a number of small USB fixes for 3.12-rc2.
One is a revert of a EHCI change that isn't quite ready for 3.12.
Others are minor things, gadget fixes, Kconfig fixes, and some quirks
and documentation updates.
All have been in linux-next for a bit"
* tag 'usb-3.12-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
USB: pl2303: distinguish between original and cloned HX chips
USB: Faraday fotg210: fix email addresses
USB: fix typo in usb serial simple driver Kconfig
Revert "USB: EHCI: support running URB giveback in tasklet context"
usb: s3c-hsotg: do not disconnect gadget when receiving ErlySusp intr
usb: s3c-hsotg: fix unregistration function
usb: gadget: f_mass_storage: reset endpoint driver data when disabled
usb: host: fsl-mph-dr-of: Staticize local symbols
usb: gadget: f_eem: Staticize eem_alloc
usb: gadget: f_ecm: Staticize ecm_alloc
usb: phy: omap-usb3: Fix return value
usb: dwc3: gadget: avoid memory leak when failing to allocate all eps
usb: dwc3: remove extcon dependency
usb: gadget: add '__ref' for rndis_config_register() and cdc_config_register()
usb: dwc3: pci: add support for BayTrail
usb: gadget: cdc2: fix conversion to new interface of f_ecm
usb: gadget: fix a bug and a WARN_ON in dummy-hcd
usb: gadget: mv_u3d_core: fix violation of locking discipline in mv_u3d_ep_disable()
Move probe out of __init section and don't use platform_driver_probe
which cannot be used with deferred probing.
Since commit e9354576 ("gpiolib: Defer failed gpio requests by default")
and 04bf3011 ("regulator: Support driver probe deferral") this driver
might return -EPROBE_DEFER if a gpio_request or regulator_get fails.
Cc: Felipe Balbi <balbi@ti.com>
Signed-off-by: Johan Hovold <jhovold@gmail.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
Move probe out of __init section and don't use platform_driver_probe
which cannot be used with deferred probing.
Since commit e9354576 ("gpiolib: Defer failed gpio requests by default")
this driver might return -EPROBE_DEFER if a gpio_request fails.
Cc: Eric Miao <eric.y.miao@gmail.com>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Haojian Zhuang <haojian.zhuang@gmail.com>
Cc: Felipe Balbi <balbi@ti.com>
Signed-off-by: Johan Hovold <jhovold@gmail.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
This patch adds support for the AD5641 single channel,
14-bit, buffered voltage output DAC.
Signed-off-by: Aida Mynzhasova <aida.mynzhasova@skitlab.ru>
Reviewed-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
The power to some of the sensors are controlled by regulators. In most
cases these are 'always on', but if not they will fail to work until
the regulator is enabled using the relevant APIs. This patch allows for
the Vdd_IO power supply to be specified by either platform data or
Device Tree.
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
The power to some of the sensors are controlled by regulators. In most
cases these are 'always on', but if not they will fail to work until
the regulator is enabled using the relevant APIs. This patch allows for
the Vdd power supply to be specified by either platform data or Device
Tree.
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Add DT bindings for the pcf857x-compatible chips and parse the device
tree node in the driver.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
The event-tracing macros do not like bool tracing arguments, so this
commit makes them be of type char. This change has the knock-on effect
of making it illegal to pass a pointer into one of these arguments, so
also change rcutiny's first call to trace_rcu_batch_end() to convert
from pointer to boolean, prefixing with "!!".
Reported-by: kbuild test robot <fengguang.wu@intel.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
This commit adds event traces to track all of rcu_nocb_kthread()'s
blocking and awakening.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
One way to distinguish between NOCB and non-NOCB rcu_callback trace
events is that the former always print zero for the lazy and non-lazy
queue lengths. Unfortunately, this also means that we cannot see the NOCB
queue lengths. This commit therefore accesses the NOCB queue lengths,
but negates them. NOCB rcu_callback trace events should therefore have
negative queue lengths.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
[ paulmck: Match operand size per kbuild test robot's advice. ]
Lost wakeups from call_rcu() to the rcuo kthreads can result in hangs
that are difficult to diagnose. This commit therefore adds tracing to
help pin down the cause of these hangs.
Reported-by: Clark Williams <williams@redhat.com>
Reported-by: Carsten Emde <C.Emde@osadl.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
[ paulmck: Add const per kbuild test robot's advice. ]
This commit adds tracing to the normal grace-period request points.
These are rcu_gp_cleanup(), which checks for the need for another
grace period at the end of the previous grace period, and
rcu_start_gp_advanced(), which restarts RCU's state machine after
an idle period. These trace events are intended to help track down
bugs where RCU remains idle despite there being work for it to do.
Reported-by: Clark Williams <williams@redhat.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
This commit adds tracing to the rcu_gp_kthread() function in order to
help trace down hangs potentially involving this kthread.
Reported-by: Clark Williams <williams@redhat.com>
Reported-by: Carsten Emde <C.Emde@osadl.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
This commit applies ACCESS_ONCE() to an outside-of-lock access to
->gp_flags. Although it is hard to imagine any sane compiler messing
this particular case up, the documentation benefits are substantial.
Plus the definition of "sane compiler" grows ever looser.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Spurious wakeups in the force-quiescent-state loop in rcu_gp_kthread()
cause the timeout to be recalculated, which would prevent rcu_gp_fqs()
from ever being called. This would in turn would prevent the grace period
from ever ending for as long as there was at least one CPU in an extended
quiescent state that had not yet passed through a quiescent state.
This commit therefore avoids recalculating the timeout unless the
previous pass's call to wait_event_interruptible_timeout() actually
did time out, thus preventing the above scenario.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
This commit improves grace-period start logic by checking ->gp_flags
under the lock and by issuing a warning if a grace period is already
in progress.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
This commit extends the work done in f7f7bac9 (rcu: Have the RCU
tracepoints use the tracepoint_string infrastructure) to cover rcutiny.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
If a system is idle from an RCU perspective for longer than specified
by CONFIG_RCU_CPU_STALL_TIMEOUT, and if one CPU starts a grace period
just as a second checks for CPU stalls, and if this second CPU happens
to see the old value of rsp->jiffies_stall, it will incorrectly report a
CPU stall. This is quite rare, but apparently occurs deterministically
on systems with about 6TB of memory.
This commit therefore orders accesses to the data used to determine
whether or not a CPU stall is in progress. Grace-period initialization
and cleanup first increments rsp->completed to mark the end of the
previous grace period, then records the current jiffies in rsp->gp_start,
then records the jiffies at which a stall can be expected to occur in
rsp->jiffies_stall, and finally increments rsp->gpnum to mark the start
of the new grace period. Now, this ordering by itself does not prevent
false positives. For example, if grace-period initialization was delayed
between recording rsp->gp_start and rsp->jiffies_stall, the CPU stall
warning code might still see an old value of rsp->jiffies_stall.
Therefore, this commit also orders the CPU stall warning accesses as
well, loading rsp->gpnum and jiffies, then rsp->jiffies_stall, then
rsp->gp_start, and finally rsp->completed. This ordering means that
the false-positive scenario in the previous paragraph would result
in rsp->completed being greater than or equal to rsp->gpnum, which is
never valid for a CPU stall, allowing the false positive to be rejected.
Furthermore, any fetch that gets an old value of rsp->jiffies_stall
must also get an old value of rsp->gpnum, which will again be rejected
by the comparison of rsp->gpnum and rsp->completed. Situations where
rsp->gp_start is later than rsp->jiffies_stall are also rejected, as
are situations where jiffies is less than rsp->jiffies_stall.
Although use of unsynchronized accesses means that there are likely
still some false-positive scenarios (synchronization has proven to be
a very bad idea on large systems), this should get rid of a large class
of these scenarios.
Reported-by: Fabian Herschel <fabian.herschel@suse.com>
Reported-by: Michal Hocko <mhocko@suse.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Michal Hocko <mhocko@suse.cz>
Tested-by: Jochen Striepe <jochen@tolot.escape.de>
The for_each_rcu_flavor() loop unconditionally scans all flavors, even
when the first flavor might have some non-lazy callbacks. Once the
loop has seen a non-lazy callback, further passes through the loop
cannot change the state. This is not a huge problem, given that there
can be at most three RCU flavors (RCU-bh, RCU-preempt, and RCU-sched),
but this code is on the path to idle, so speeding it up even a small
amount would have some benefit.
This commit therefore does two things:
1. Rearranges the order of the list of RCU flavors in order to
place the most active flavor first in the list. The most active
RCU flavor is RCU-preempt, or, if there is no RCU-preempt,
RCU-sched.
2. Reworks the for_each_rcu_flavor() to exit early when the first
non-lazy callback is seen, or, in the case where the caller
does not care about non-lazy callbacks (RCU_FAST_NO_HZ=n),
when the first callback is seen.
Reported-by: Chen Gang <gang.chen@asianux.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
The "idle" variable in both rcu_eqs_enter_common() and
rcu_eqs_exit_common() is only used in a WARN_ON_ONCE(). If the kernel
is built disabling WARN_ON_ONCE(), the compiler will complain (rightly)
that "idle" is unused. This commit therefore adds a __maybe_unused to
the declaration of both variables.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
__get_cpu_var() is used for multiple purposes in the kernel source. One
of them is address calculation via the form &__get_cpu_var(x). This
calculates the address for the instance of the percpu variable of the
current processor based on an offset.
Other use cases are for storing and retrieving data from the current
processors percpu area. __get_cpu_var() can be used as an lvalue when
writing data or on the right side of an assignment.
__get_cpu_var() is defined as :
__get_cpu_var() always only does an address determination. However,
store and retrieve operations could use a segment prefix (or global
register on other platforms) to avoid the address calculation.
this_cpu_write() and this_cpu_read() can directly take an offset into
a percpu area and use optimized assembly code to read and write per
cpu variables.
This patch converts __get_cpu_var into either an explicit address
calculation using this_cpu_ptr() or into a use of this_cpu operations
that use the offset. Thereby address calcualtions are avoided and less
registers are used when code is generated.
At the end of the patchset all uses of __get_cpu_var have been removed
so the macro is removed too.
The patchset includes passes over all arches as well. Once these
operations are used throughout then specialized macros can be defined in
non -x86 arches as well in order to optimize per cpu access by f.e. using
a global register that may be set to the per cpu base.
Transformations done to __get_cpu_var()
1. Determine the address of the percpu instance of the current processor.
DEFINE_PER_CPU(int, y);
int *x = &__get_cpu_var(y);
Converts to
int *x = this_cpu_ptr(&y);
2. Same as #1 but this time an array structure is involved.
DEFINE_PER_CPU(int, y[20]);
int *x = __get_cpu_var(y);
Converts to
int *x = this_cpu_ptr(y);
3. Retrieve the content of the current processors instance of a per cpu
variable.
DEFINE_PER_CPU(int, u);
int x = __get_cpu_var(y)
Converts to
int x = __this_cpu_read(y);
4. Retrieve the content of a percpu struct
DEFINE_PER_CPU(struct mystruct, y);
struct mystruct x = __get_cpu_var(y);
Converts to
memcpy(this_cpu_ptr(&x), y, sizeof(x));
5. Assignment to a per cpu variable
DEFINE_PER_CPU(int, y)
__get_cpu_var(y) = x;
Converts to
this_cpu_write(y, x);
6. Increment/Decrement etc of a per cpu variable
DEFINE_PER_CPU(int, y);
__get_cpu_var(y)++
Converts to
this_cpu_inc(y)
Signed-off-by: Christoph Lameter <cl@linux.com>
[ paulmck: Address conflicts. ]
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
The list_splice_init_rcu() function allows a list visible to RCU readers
to be spliced into another list visible to RCU readers. This is OK,
except for the use of INIT_LIST_HEAD(), which does pointer updates
without doing anything to make those updates safe for concurrent readers.
Of course, most of the time INIT_LIST_HEAD() is being used in reader-free
contexts, such as initialization or cleanup, so it is OK for it to update
pointers in an unsafe-for-RCU-readers manner. This commit therefore
creates an INIT_LIST_HEAD_RCU() that uses ACCESS_ONCE() to make the updates
reader-safe. The reason that we can use ACCESS_ONCE() instead of the more
typical rcu_assign_pointer() is that list_splice_init_rcu() is updating the
pointers to reference something that is already visible to readers, so
that there is no problem with pre-initialized values.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
This commit replaces an incorrect (but fortunately functional)
bitwise OR ("|") operator with the correct logical OR ("||").
Reported-by: kbuild test robot <fengguang.wu@intel.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
The rcu_cpu_stall_timeout kernel parameter, the rcu_dynticks per-CPU
variable, and the rcu_gp_fqs() function are used only locally. This
commit therefore marks them as static.
Reported-by: kbuild test robot <fengguang.wu@intel.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Starting with UVD3 message and feedback buffers have their
own 256MB segment, so no need to force them into VRAM any more.
Signed-off-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The tests are only usable if the acceleration engines have
been successfully initialized.
Based on an initial patch from: Alex Ivanov <gnidorah@p0n4ik.tk>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
If memory allocation of in pcpu_embed_first_chunk() fails, the
allocated memory is not released correctly. In the release loop also
the non-allocated elements are released which leads to the following
kernel BUG on systems with very little memory:
[ 0.000000] kernel BUG at mm/bootmem.c:307!
[ 0.000000] illegal operation: 0001 [#1] PREEMPT SMP DEBUG_PAGEALLOC
[ 0.000000] Modules linked in:
[ 0.000000] CPU: 0 PID: 0 Comm: swapper Not tainted 3.10.0 #22
[ 0.000000] task: 0000000000a20ae0 ti: 0000000000a08000 task.ti: 0000000000a08000
[ 0.000000] Krnl PSW : 0400000180000000 0000000000abda7a (__free+0x116/0x154)
[ 0.000000] R:0 T:1 IO:0 EX:0 Key:0 M:0 W:0 P:0 AS:0 CC:0 PM:0 EA:3
...
[ 0.000000] [<0000000000abdce2>] mark_bootmem_node+0xde/0xf0
[ 0.000000] [<0000000000abdd9c>] mark_bootmem+0xa8/0x118
[ 0.000000] [<0000000000abcbba>] pcpu_embed_first_chunk+0xe7a/0xf0c
[ 0.000000] [<0000000000abcc96>] setup_per_cpu_areas+0x4a/0x28c
To fix the problem now only allocated elements are released. This then
leads to the correct kernel panic:
[ 0.000000] Kernel panic - not syncing: Failed to initialize percpu areas.
...
[ 0.000000] Call Trace:
[ 0.000000] ([<000000000011307e>] show_trace+0x132/0x150)
[ 0.000000] [<0000000000113160>] show_stack+0xc4/0xd4
[ 0.000000] [<00000000007127dc>] dump_stack+0x74/0xd8
[ 0.000000] [<00000000007123fe>] panic+0xea/0x264
[ 0.000000] [<0000000000b14814>] setup_per_cpu_areas+0x5c/0x28c
tj: Flipped if conditional so that it doesn't need "continue".
Signed-off-by: Michael Holzheu <holzheu@linux.vnet.ibm.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Allow user to change the number of IOs that are reserved by
bio-based DM's mempools by writing to this file:
/sys/module/dm_mod/parameters/reserved_bio_based_ios
The default value is RESERVED_BIO_BASED_IOS (16). The maximum allowed
value is RESERVED_MAX_IOS (1024).
Export dm_get_reserved_bio_based_ios() for use by DM targets and core
code. Switch to sizing dm-io's mempool and bioset using DM core's
configurable 'reserved_bio_based_ios'.
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Frank Mayhar <fmayhar@google.com>
Allow user to change the number of IOs that are reserved by
request-based DM's mempools by writing to this file:
/sys/module/dm_mod/parameters/reserved_rq_based_ios
The default value is RESERVED_REQUEST_BASED_IOS (256). The maximum
allowed value is RESERVED_MAX_IOS (1024).
Export dm_get_reserved_rq_based_ios() for use by DM targets and core
code. Switch to sizing dm-mpath's mempool using DM core's configurable
'reserved_rq_based_ios'.
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Frank Mayhar <fmayhar@google.com>
Acked-by: Mikulas Patocka <mpatocka@redhat.com>
Bio-based device mapper processing doesn't need larger mempools (like
request-based DM does), so lower the number of reserved entries for
bio-based operation. 16 was already used for bio-based DM's bioset
but mistakenly wasn't used for it's _io_cache.
Formalize difference between bio-based and request-based defaults by
introducing RESERVED_BIO_BASED_IOS and RESERVED_REQUEST_BASED_IOS.
(based on older code from Mikulas Patocka)
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Frank Mayhar <fmayhar@google.com>
Acked-by: Mikulas Patocka <mpatocka@redhat.com>
Fix issue where the block layer would stack the discard limits of the
pool's data device even if the "ignore_discard" pool feature was
specified.
The pool and thin device(s) still had discards disabled because the
QUEUE_FLAG_DISCARD request_queue flag wasn't set. But to avoid user
confusion when "ignore_discard" is used: both the pool device and the
thin device(s) have zeroes for all discard limits.
Also, always set discard_zeroes_data_unsupported in targets because they
should never advertise the 'discard_zeroes_data' capability (even if the
pool's data device supports it).
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Acked-by: Joe Thornber <ejt@redhat.com>
This is a partial revert of c6cf7777a3.
We need to take into account the clk voltage dependencies of the
board. Not doing so can lead to stability issues on certain
boards if the clks exceed the levels in the dep tables.
DPM already takes that into account, so for optimal performance,
use DPM.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Filter out mclk and sclk levels higher than listed in the clk
voltage dependency tables. Supporting these clocks will require
additional driver tweaking that isn't supported yet.
See bug:
https://bugs.freedesktop.org/show_bug.cgi?id=68235
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Filter out mclk and sclk levels higher than listed in the clk
voltage dependency tables. Supporting these clocks will require
additional driver tweaking that isn't supported yet.
See bug:
https://bugs.freedesktop.org/show_bug.cgi?id=68235
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
filter out mclk and sclk levels higher than listed in the clk
voltage dependency tables. Supporting these clocks will require
additional driver tweaking that isn't supported yet.
See bug:
https://bugs.freedesktop.org/show_bug.cgi?id=68235
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Filter out mclk and sclk levels higher than listed in the clk
voltage dependency tables. Supporting these clocks will require
additional driver tweaking that isn't supported yet.
See bug:
https://bugs.freedesktop.org/show_bug.cgi?id=68235
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This patch adds a helper function to fetch the max clock
from the voltage clock dependecy tables. Clocks above that
level tend to be unstable and will require additional driver
tweaks in order to work properly.
This patch implemented the helper function to fetch the max clocks
from the dependency tables. The following patches implement the
per-asic clock filtering.
See bug:
https://bugs.freedesktop.org/show_bug.cgi?id=68235
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
I missed this when I fixed up this file.
Noticed-by: Mathias Fröhlich <Mathias.Froehlich@gmx.net>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Calling kfree() to clean up the memory obtained from spi_alloc_master() is
wrong as this is done in spi_master_release() when spi_master->dev's refcount
reaches zero.
Signed-off-by: Axel Lin <axel.lin@ingics.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
Add compatibles for s3c6410, s5pc100 and s5pc110/s5pv210 boards.
Signed-off-by: Mateusz Krawczuk <m.krawczuk@partner.samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
