The first one was reported by Mauro Carvalho Chehab, where if a poll()
is done against a trace buffer for a CPU that has never been online,
it will crash the kernel, as buffers are only created when a CPU comes
on line, but the trace files are for all possible CPUs.
This fix is to check if the buffer was allocated and if not return -EINVAL.
That was the simple fix, the real fix is a bit more complex and not for
a -rc release. We could have the files created when the CPUs come online.
That would require some design changes.
The second one was reported by Peter Zijlstra. If the kernel command line
has ftrace=nop, it will lock up the system on boot up. This is because
the new design for 3.10 has the nop tracer bootstrap the tracing subsystem.
When ftrace=<trace> is defined, when a that tracer is registered, it
starts the tracing, but uses the nop tracer to clear things out.
What happened here was that ftrace=nop caused the registering of nop
to start it and use nop before it was initialized.
The only thing nop needs to have done to initialize it is to have the
tracer point its current_tracer structure member to the nop tracer.
Doing that before registering the nop tracer makes everything work.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.12 (GNU/Linux)
iQEcBAABAgAGBQJRpMkPAAoJEOdOSU1xswtMxeEIALWCnqSCKZJ0Oz+2TuR15vd2
Szm/knRBktRG2FizN8FIouXXMLIYM5HFSvO3Q2bWuV4Dv5KaqNcCEL5BggZC/+Rj
swt5+rMiUuln0teq792h2LhKwORw0YicLzWsyIZ82iSpcFKAseXqcMzEe/P/Emat
+J1QaoeDtOx/3X5Sv6tqHomqR80u7phQJwmIK6Yik389yLo3sy2XiPRk9PJqDpac
V9xbCnZlnopm7rLo7pEAI3R6Vn+MX6lrY1MO0xxjqeIvhvxr9nk0WIRnaevyARbt
eHnCtfa9pjn+bU9xYaFmyIkilc/IEBFRLb0dtEueH81nmaFDXpHI+h/pEFrDJqE=
=PR0j
-----END PGP SIGNATURE-----
Merge tag 'trace-fixes-v3.10-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull tracing fixes from Steven Rostedt:
"Two more fixes:
The first one was reported by Mauro Carvalho Chehab, where if a poll()
is done against a trace buffer for a CPU that has never been online,
it will crash the kernel, as buffers are only created when a CPU comes
on line, but the trace files are for all possible CPUs.
This fix is to check if the buffer was allocated and if not return
-EINVAL.
That was the simple fix, the real fix is a bit more complex and not
for a -rc release. We could have the files created when the CPUs come
online. That would require some design changes.
The second one was reported by Peter Zijlstra. If the kernel command
line has ftrace=nop, it will lock up the system on boot up. This is
because the new design for 3.10 has the nop tracer bootstrap the
tracing subsystem. When ftrace=<trace> is defined, when a that tracer
is registered, it starts the tracing, but uses the nop tracer to clear
things out. What happened here was that ftrace=nop caused the
registering of nop to start it and use nop before it was initialized.
The only thing nop needs to have done to initialize it is to have the
tracer point its current_tracer structure member to the nop tracer.
Doing that before registering the nop tracer makes everything work."
* tag 'trace-fixes-v3.10-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
ring-buffer: Do not poll non allocated cpu buffers
tracing: Fix crash when ftrace=nop on the kernel command line
Pull m68k fixes from Geert Uytterhoeven:
- futex support that I had missed before,
- A long-overdue update of the m68k defconfigs.
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k:
m68k: Update defconfigs for v3.9
m68k: implement futex.h to support userspace robust futexes and PI mutexes
With the hcd is now a direct member of struct musb, we can now simply
eliminate the musb_to_hcd() macro. There aren't that many users left
anyway, as some where already fixed up when parts were factored out to
musb_host.c
Signed-off-by: Daniel Mack <zonque@gmail.com>
Acked-by: Peter Korsgaard <jacmet@sunsite.dk>
Signed-off-by: Felipe Balbi <balbi@ti.com>
Initialize the host and gadget subsystems of the musb driver only when
the appropriate mode is selected from platform data, or device-tree
information, respectively.
Signed-off-by: Daniel Mack <zonque@gmail.com>
Acked-by: Peter Korsgaard <jacmet@sunsite.dk>
Signed-off-by: Felipe Balbi <balbi@ti.com>
Define MUSB_PORT_MODE_{HOST,GADGET,DUAL_ROLE} and store the
platform-specified value in struct musb.
Note that MUSB_PORT_MODE_HOST has to be set to 1 in order to match
existing device tree bindings which are already documented but in fact
unusued. For information on the bindings, please refer to
Documentation/devicetree/bindings/usb/omap-usb.txt
Documentation/devicetree/bindings/usb/am33xx-usb.txt
Signed-off-by: Daniel Mack <zonque@gmail.com>
Acked-by: Peter Korsgaard <jacmet@sunsite.dk>
Signed-off-by: Felipe Balbi <balbi@ti.com>
This patch re-introduces the bits that are necessary to use the musb
controller in host mode.
Signed-off-by: Daniel Mack <zonque@gmail.com>
Acked-by: Peter Korsgaard <jacmet@sunsite.dk>
Signed-off-by: Felipe Balbi <balbi@ti.com>
This makes building the actual object files optional to the selected
mode, which saves users who know which kind of USB mode support they
need some binary size.
Unimplemented functions are stubbed out with static inline functions.
Signed-off-by: Daniel Mack <zonque@gmail.com>
Acked-by: Peter Korsgaard <jacmet@sunsite.dk>
Signed-off-by: Felipe Balbi <balbi@ti.com>
The musb struct is currently allocated along with the hcd, which makes
it difficult to build a driver that only acts as gadget device.
Fix this by allocating musb directly, and keep the hcd around as
a pointer in the musb struct.
struct hc_driver musb_hc_driver can now also be static to musb_host.c,
and the macro musb_to_hcd() is just a pointer dereferencer for now, and
will be eliminated later.
Signed-off-by: Daniel Mack <zonque@gmail.com>
Acked-by: Peter Korsgaard <jacmet@sunsite.dk>
Signed-off-by: Felipe Balbi <balbi@ti.com>
This function has its only user in musb_virthub.c, so let's move it
there and make it static.
Signed-off-by: Daniel Mack <zonque@gmail.com>
Acked-by: Peter Korsgaard <jacmet@sunsite.dk>
Signed-off-by: Felipe Balbi <balbi@ti.com>
This will be done from a more appropriate location and as it doesn't
work anyway, it can safely be removed before the other changes.
Signed-off-by: Daniel Mack <zonque@gmail.com>
Acked-by: Peter Korsgaard <jacmet@sunsite.dk>
Signed-off-by: Felipe Balbi <balbi@ti.com>
In particular, this introduces musb_host_resume_root_hub()and
musb_host_poke_root_hub() which will be stubbed out later.
Signed-off-by: Daniel Mack <zonque@gmail.com>
Acked-by: Peter Korsgaard <jacmet@sunsite.dk>
Signed-off-by: Felipe Balbi <balbi@ti.com>
Let the function declarations live in the header files they belong to,
which makes it easier to stub them out later.
Signed-off-by: Daniel Mack <zonque@gmail.com>
Acked-by: Peter Korsgaard <jacmet@sunsite.dk>
Signed-off-by: Felipe Balbi <balbi@ti.com>
The functionality meant to be represented by this symbol will be
re-added later, but for now, USB_GADGET_MUSB_HDRC is in fact unused and
can be dropped.
Signed-off-by: Daniel Mack <zonque@gmail.com>
Acked-by: Peter Korsgaard <jacmet@sunsite.dk>
Signed-off-by: Felipe Balbi <balbi@ti.com>
Pull microblaze fixes from Michal Simek:
"One patch fix futex support and my patches fix warnings which were
reported by Geert's regression testing"
* 'next' of git://git.monstr.eu/linux-2.6-microblaze:
microblaze: Reversed logic in futex cmpxchg
microblaze: Use proper casting for inb/inw/inl in io.h
microblaze: Initialize temp variable to remove compilation warning
This was related to an old bug on early versions
of TUSB6010 which we don't support anymore.
It's known to cause issues on several other
situations with more recent devices so we
better remove this flag now and come up
with a better workaround should one be deemed
necessary.
Signed-off-by: Felipe Balbi <balbi@ti.com>
We can't simply pass the resource pointer from our
device down to our children, otherwise module
reinsertion will not work as the resource will
continue to be marked as busy.
Fix it by building a proper struct resource for
our child musb device.
Tested-by: Dmitry Lifshitz <lifshitz@compulab.co.il>
Signed-off-by: Felipe Balbi <balbi@ti.com>
The tracing infrastructure sets up for possible CPUs, but it uses
the ring buffer polling, it is possible to call the ring buffer
polling code with a CPU that hasn't been allocated. This will cause
a kernel oops when it access a ring buffer cpu buffer that is part
of the possible cpus but hasn't been allocated yet as the CPU has never
been online.
Reported-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Tested-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
When adding CPU to the SMP group and enabling the coherency on this
CPU we must protect the register access.
The previous implementation claims to be atomic but doesn't provide
any protection against parallel access to the coherency fabric control
and configuration registers.
This patch fixes this by using the ldrex and strex mechanism.
This method should be used in all accesses to those registers.
[gregory.clement@free-electrons.com: fixed the commit's topic]
Signed-off-by: Nadav Haklai <nadavh@marvell.com>
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
When creating the DT based boards-ts219.c the none DT ts219-setup.c
was used as a template. This includes a lateinit() call to initialize
the PCIe bus. The code makes use of machine_is_ts219() which is never
true on DT, so a FIXME was added and the code left as is. This was
unproblematic until b73690c8f8: "ARM: Kirkwood: Support basic
hotplug for PCI-E" which changes the way the PCIe bus is
initialized. The non-DT ts219-setup.c now crashes during boot. The
lateinit() call in the DT boards-ts219.c is being called,
machine_is_ts219() is true and so the PCIe is initialized a second
time.
This patch removes the useless, and now clearly dangerous, code from
boards-ts219.c, making ts219-setup.c work again.
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Cc: <stable@vger.kernel.org> # v3.9.x
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
The length of the registers area for the Marvell 370/XP Ethernet
controller was incorrect in the .dtsi: 0x2400 while it should have
been 0x4000. Until now, this problem wasn't noticed because there was
a large static mapping for all I/Os set up by ->map_io(). But since
we're going to get rid of this static mapping, we need to ensure that
the register areas are properly sized.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
The length of the registers area for the Marvell 370/XP SATA
controller was incorrect in the .dtsi: 0x2400 while it should have
been 0x5000. Until now, this problem wasn't noticed because there was
a large static mapping for all I/Os set up by ->map_io(). But since
we're going to get rid of this static mapping, we need to ensure that
the register areas are properly sized.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
The default register value for MASTERA_VOL is 0x00, the same as
MASTERB_VOL.
Signed-off-by: Nicolas Schichan <nschichan@freebox.fr>
Acked-by: Brian Austin <brian.austin@cirrus.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Cc: stable@vger.kernel.org
In the past we controlled the selection of DMA for a certain
host by a boolean switch in the platform data. Currently
there is no way to enable DMA on a PL022 probed from the
device tree. Let's default to trying to obtain DMA channels
in the DT case, and then we can always fail (and thus fall
back to PIO mode).
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
The array 'drc_cfg' of size 3 may use index value -22 (EINVAL)
The array 'retune_mobile_cfg' of size 3 may use index value -22 (EINVAL)
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Rename `dirty' to `set' as it is a bit more descriptive. A set
control is any control that has been set by the user. We need to ensure
that everytime we boot the DSP we sync out any controls that were
set.
We could at some point start keeping track of the default values of
the controls to suppress some of the device I/O.
Signed-off-by: Dimitris Papastamos <dp@opensource.wolfsonmicro.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
For zero copy request, error will be encoded in the user space buffer.
So copy the error code correctly using copy_from_user. Here we use the
extra bytes we allocate for zero copy request. If total error details
are more than P9_ZC_HDR_SZ - 7 bytes, we return -EFAULT. The patch also
avoid a memory allocation in the error path.
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>
Make the default 9p experience better by defaulting to virtio transport if present.
These days most of the users are using 9p in a virtualized setup
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>
If we dont' specify a protocol version default to 9P2000.L. 9P2000.L
have better support for posix semantic and is where all the recent development
is happening.
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>
Current implementation of mop500_ab8500 allows for inconsistent sample
rate and channel count configuration between the playback and recording
interfaces, through in the hardware the two MSP controllers share
common clock and frame sync signals.
This patch adds the necessary code to ensure that the two device are
configure consistently. The check is added at machine driver level, as
how to lock DAI configuration depend of the actual hardware
implementation.
Signed-off-by: Fabio Baltieri <fabio.baltieri@linaro.org>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
During recent refactoring the code to report removal when MICDET reports
an absent microphone was removed, causing problems for systems which rely
solely on the MICDET for this functionality. Restore it.
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
In the (not so useful) kernel configuration where CONFIG_SWAP
is undefined and CONFIG_XEN_SELFBALLOONING is defined,
xen_tmem_init would use undefined variable 'static bool frontswap'.
Added #else to have #define frontswap (0) in the case where
CONFIG_FRONTSWAP is not defined.
Signed-off-by: Frederico Cadete <frederico@cadete.eu>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Adding automated test for testing the build process.
To run it you need to be in perf directory or specify one with PERF
variable. It's also possible to specify optional Makefile to test via MK
variable.
Whole suite is executed twice, the second time with O=/tmp/xxx option
added.
To run the whole suite:
$ make -f tests/make
- make_pure: cd . && make -f Makefile
test: test -x ./perf
- make_clean_all: cd . && make -f Makefile clean all
test: test -x ./perf
- make_python_perf_so: cd . && make -f Makefile python/perf.so
test: test -f ./python/perf.so
- make_debug: cd . && make -f Makefile DEBUG=1
test: test -x ./perf
- make_no_libperl: cd . && make -f Makefile NO_LIBPERL=1
test: test -x ./perf
You see command line for 'make_pure' test right away, and the output is
stored into 'make_pure' file.
To run simple test:
$ make -f tests/make make_debug
- make_debug: cd . && make -f Makefile DEBUG=1
test: test -x ./perf
At this moment tests checks for successfull build and for existence of
several built files. Additional after-build checks could be added.
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1369398928-9809-2-git-send-email-jolsa@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Information is available, so why not save it in case some command wants
to use it.
Signed-off-by: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1369543631-5106-1-git-send-email-dsahern@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
