Commit graph

506,942 commits

Author SHA1 Message Date
Yijing Wang
e5a7074a75 i2c: remove CONFIG_HOTPLUG ifdefs
CONFIG_HOTPLUG is going away as an option, cleanup CONFIG_HOTPLUG
ifdefs in i2c files.

Signed-off-by: Yijing Wang <wangyijing@huawei.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2013-04-09 11:57:55 +02:00
Sylwester Nawrocki
5fb1c2dd8f mfd: syscon: Add missing struct device_node declaration
syscon.h header uses struct device_node in functions' declarations
without declaring it. This causes compilation warnings like:

include/linux/mfd/syscon.h:20: warning: ‘struct device_node’
declared inside parameter list
include/linux/mfd/syscon.h:20: warning: its scope is only this
definition or declaration, which is probably not what you want

Fix it by adding a forward declaration of struct device_node.

Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Acked-by: Dong Aisheng <dong.aisheng@linaro.org>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-04-09 11:52:32 +02:00
Jaemin Yoo
85747311ec i2c: s3c2410: Add SMBus emulation for block read
SMBus read and write are supported by the emulation layer of i2c
framework if the controller doesn't have SMBus features.

I2C_M_RECV_LEN flag is used to let i2c drivers know rx length is not
yet determined but will be read to the first byte in rx buffer.

s3c2410 doesn't handle this flag. So only one byte is read from slave.
There fore following two features are added to the driver code.

1. skip rx length check if I2C_M_RECV_LEN is set and the length is 1.
2. add actual bytes to the rx length after reading first bytes if
   I2C_M_RECV_LEN.

I2C_M_RECV_LEN is only set for SMBus command. So this code does not
affect legacy codes which only use i2c command for s3c2410.

Signed-off-by: Jaemin Yoo <jmin.yoo@samsung.com>
Tested-by: Prasanna Kumar <prasanna.ps@samsung.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2013-04-09 11:23:05 +02:00
Jaegeuk Kim
d64f80473b f2fs: write checkpoint before starting FG_GC
In order to be aware of prefree and free sections during FG_GC, let's start with
write_checkpoint().

Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2013-04-09 18:21:24 +09:00
Zhihui Zhang
3315101f70 f2fs: fix the logic of IS_DNODE()
If (ofs % (NIDS_PER_BLOCK + 1) == 0), the node is an indirect node block.

Signed-off-by: Zhihui Zhang <zzhsuny@gmail.com>
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2013-04-09 18:21:24 +09:00
Jaegeuk Kim
399368372e f2fs: introduce a new global lock scheme
In the previous version, f2fs uses global locks according to the usage types,
such as directory operations, block allocation, block write, and so on.

Reference the following lock types in f2fs.h.
enum lock_type {
	RENAME,		/* for renaming operations */
	DENTRY_OPS,	/* for directory operations */
	DATA_WRITE,	/* for data write */
	DATA_NEW,	/* for data allocation */
	DATA_TRUNC,	/* for data truncate */
	NODE_NEW,	/* for node allocation */
	NODE_TRUNC,	/* for node truncate */
	NODE_WRITE,	/* for node write */
	NR_LOCK_TYPE,
};

In that case, we lose the performance under the multi-threading environment,
since every types of operations must be conducted one at a time.

In order to address the problem, let's share the locks globally with a mutex
array regardless of any types.
So, let users grab a mutex and perform their jobs in parallel as much as
possbile.

For this, I propose a new global lock scheme as follows.

0. Data structure
 - f2fs_sb_info -> mutex_lock[NR_GLOBAL_LOCKS]
 - f2fs_sb_info -> node_write

1. mutex_lock_op(sbi)
 - try to get an avaiable lock from the array.
 - returns the index of the gottern lock variable.

2. mutex_unlock_op(sbi, index of the lock)
 - unlock the given index of the lock.

3. mutex_lock_all(sbi)
 - grab all the locks in the array before the checkpoint.

4. mutex_unlock_all(sbi)
 - release all the locks in the array after checkpoint.

5. block_operations()
 - call mutex_lock_all()
 - sync_dirty_dir_inodes()
 - grab node_write
 - sync_node_pages()

Note that,
 the pairs of mutex_lock_op()/mutex_unlock_op() and
 mutex_lock_all()/mutex_unlock_all() should be used together.

Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2013-04-09 18:21:18 +09:00
Fabio Baltieri
f201f730b8 mfd: ab8500-core: Add of_compatilbe property for ab8500-usb
Add of_comptabile string to the ab8500-usb cell to allow the driver to
grab properties from device-tree when available.

Signed-off-by: Fabio Baltieri <fabio.baltieri@linaro.org>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-04-09 11:04:23 +02:00
Roger Quadros
03a8f438f5 mfd: omap-usb-host: Add device tree support and binding information
Allows the OMAP HS USB host controller to be specified
via device tree.

Signed-off-by: Roger Quadros <rogerq@ti.com>
Reviewed-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-04-09 10:59:55 +02:00
Roger Quadros
40b0d68a8c mfd: omap-usb-host: Remove PHY reset handling code
PHY reset GPIO handling will be done in the PHY driver

Signed-off-by: Roger Quadros <rogerq@ti.com>
Acked-by: Felipe Balbi <balbi@ti.com>
Acked-by: Samuel Ortiz <sameo@linux.intel.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-04-09 10:59:55 +02:00
Magnus Damm
c9dff05030 ARM: shmobile: Add second I/O range for r8a7790 PFC
Add the GPIO I/O memory range to the r8a7790 PFC device.

This extra I/O memory range is needed when using the PFC
tables to drive both pin functions (using PINCTRL or
function GPIO for old code) and actual GPIO. The goal is
however to use a separate GPIO driver in the long run
and when that happens this extra I/O memory range can
be removed.

Signed-off-by: Magnus Damm <damm@opensource.se>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-04-09 17:58:42 +09:00
Kuninori Morimoto
407cd59798 sh-pfc: r8a7779: tidyup intc_irq3_b typo
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Simon Horman <horms@verge.net.au>
2013-04-09 17:56:08 +09:00
Maxime Ripard
cb51f8e8e3 pinctrl: sunxi: Rename wemac functions to emac
The pin functions associated to the ethernet controller were introduced
with the label "wemac", which was the name of the ethernet driver in the
allwinner source tree, while the real name of the IP is actually "emac",
as advertised in several documents including the datasheet.

Since this is part of the device tree bindings, and that these part of
the bindings have not yet be released in a kernel version, it seems like
the good timing to change it and assure consistency.

Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-04-09 10:47:52 +02:00
Jason Hrycay
1127a3d448 f2fs: move f2fs_balance_fs from truncate to punch_hole
Move the f2fs_balance_fs out of the truncate_hole function and only
perform that in punch_hole use case.  The commit:

  ed60b1644e7f7e5dd67d21caf7e4425dff05dad0

intended to do this but moved it into truncate_hole to cover more
cases.  However, a deadlock scenario is possible when deleting an inode
entry under specific conditions:

 f2fs_delete_entry()
     mutex_lock_op(sbi, DENTRY_OPS);
     truncate_hole()
         f2fs_balance_fs()
             mutex_lock(&sbi->gc_mutex);
             f2fs_gc()
                 write_checkpoint()
                     block_operations()
                         mutex_lock_op(sbi, DENTRY_OPS);

Lets move it into the punch_hole case to cover the original intent of
avoiding it during fallocate's expand_inode_data case.

Change-Id: I29f8ea1056b0b88b70ba8652d901b6e8431bb27e
Signed-off-by: Jason Hrycay <jason.hrycay@motorola.com>
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2013-04-09 17:22:45 +09:00
Mark Brown
6394678e6e mfd: wm8994: Don't use system PM operations
For realistic systems the power management is controlled entirely via
runtime PM - if the device is not runtime suspended then the suspend
will abort without doing anything as functionality such as accessory
detection or audio bypass will require the device to be enabled while
if the device is runtime suspended it is already in the lowest power
state. This means that system suspend is redundant and can be removed
which avoids issues with attempting to double disable the regulators.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-04-09 10:21:51 +02:00
Fabio Baltieri
7a93fb3754 mfd: ab8500-core: Ignore masked out interrupts
AB8500 asserts LATCH bits for masked out interrupts.  This patch
explicitly masks those out using the cached mask value to prevent
handle_nested_irq() being called for masked IRQ on the same register as
unmasked ones.

Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Fabio Baltieri <fabio.baltieri@linaro.org>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-04-09 10:19:45 +02:00
Thomas Abraham
8dc3568d55 pinctrl: exynos5440: add gpio interrupt support
Exynos5440 supports gpio interrupts on gpios 16 to 23. The eight interrupt lines
originating from the pin-controller are connected to the gic. Add irq-chip support
for these interrupts.

Signed-off-by: Thomas Abraham <thomas.ab@samsung.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-04-09 10:16:53 +02:00
Paul Bolle
d95c785500 mfd: Remove twelve unused Kconfig symbols
Twelve Kconfig symbols, all related to WM8350, WM8351, and WM8352, are
unused. Commit 19d57ed5a3 ("mfd: Remove
custom wm8350 cache implementation") removed all their (actual) users.
Remove these symbols too.

Signed-off-by: Paul Bolle <pebolle@tiscali.nl>
Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Kukjin Kim <kgene.kim@samsung.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-04-09 10:14:00 +02:00
Thomas Abraham
f981973942 pinctrl: exynos5440: fix probe failure due to missing pin-list in config nodes
The property 'samsung,exynos5440-pins' is optional in configuration nodes
which are included in the Exynos5440 pin-controller device node. Fix the
incorrect failure in driver probe if 'samsung,exynos5440-pins' property
is not found in the configuration nodes.

Signed-off-by: Thomas Abraham <thomas.ab@samsung.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-04-09 10:13:59 +02:00
Ashish Jangam
3cec5f4e75 mfd: da9055: Change irq state to default
This patch changes the irq state from high to the now default low.
Because the default PMIC irq state of DA9055 got changed from high to low.
This change should not affect any of the existing users since all of them
use active low state.

This patch has been tested on smdkv6410.

Signed-off-by: Ashish <ashish.jangam@kpitcummins.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-04-09 10:09:26 +02:00
Sachin Kamat
2e8ff91a5b pinctrl: ab8505: Staticize some symbols
Silences the following warnings:
drivers/pinctrl/pinctrl-ab8505.c:274:28: warning:
symbol 'ab8505_alternate_functions' was not declared. Should it be static?
drivers/pinctrl/pinctrl-ab8505.c:351:32: warning:
symbol 'ab8505_gpio_irq_cluster' was not declared. Should it be static?

Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Acked-by: Patrice Chotard <patrice.chotard@st.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-04-09 09:59:42 +02:00
Wei Yongjun
3480a21259 can: gw: use kmem_cache_free() instead of kfree()
Memory allocated by kmem_cache_alloc() should be freed using
kmem_cache_free(), not kfree().

Cc: linux-stable <stable@vger.kernel.org> # >= v3.2
Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Acked-by: Oliver Hartkopp <socketcan@hartkopp.net>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2013-04-09 09:58:44 +02:00
Sachin Kamat
efdd69f124 pinctrl: ab8540: Staticize some symbols
Silences the following warnings:
drivers/pinctrl/pinctrl-ab8540.c:302:28: warning:
symbol 'ab8540_alternate_functions' was not declared. Should it be static?
drivers/pinctrl/pinctrl-ab8540.c:379:32: warning:
symbol 'ab8540_gpio_irq_cluster' was not declared. Should it be static?

Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Acked-by: Patrice Chotard <patrice.chotard@st.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-04-09 09:58:02 +02:00
Sachin Kamat
49e6cbfbfe pinctrl: ab9540: Staticize some symbols
Fixes the following warnings:
drivers/pinctrl/pinctrl-ab9540.c:382:28: warning:
symbol 'ab9540alternate_functions' was not declared. Should it be static?
drivers/pinctrl/pinctrl-ab9540.c:457:32: warning:
symbol 'ab9540_gpio_irq_cluster' was not declared. Should it be static?

Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Acked-by: Patrice Chotard <patrice.chotard@st.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-04-09 09:55:59 +02:00
Sachin Kamat
a0ce9f3ee3 pinctrl: ab8500: Staticize some symbols
These symbols are used only in this file. Silences the following
warnings:
drivers/pinctrl/pinctrl-ab8500.c:392:28: warning:
symbol 'ab8500_alternate_functions' was not declared. Should it be static?
drivers/pinctrl/pinctrl-ab8500.c:458:32: warning:
symbol 'ab8500_gpio_irq_cluster' was not declared. Should it be static?

Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Acked-by: Patrice Chotard <patrice.chotard@st.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-04-09 09:54:00 +02:00
Sachin Kamat
9c4154ef76 pinctrl: abx500: Staticize some symbols
These symbols are used only in this file. Without this patch
we get the following warnings:
drivers/pinctrl/pinctrl-abx500.c:520:5: warning:
symbol 'abx500_gpio_request' was not declared. Should it be static?
drivers/pinctrl/pinctrl-abx500.c:527:6: warning:
symbol 'abx500_gpio_free' was not declared. Should it be static?
drivers/pinctrl/pinctrl-abx500.c:614:5: warning:
symbol 'abx500_gpio_request_enable' was not declared. Should it be static?
drivers/pinctrl/pinctrl-abx500.c:714:5: warning:
symbol 'abx500_pin_config_get' was not declared. Should it be static?
drivers/pinctrl/pinctrl-abx500.c:721:5: warning:
symbol 'abx500_pin_config_set' was not declared. Should it be static?

Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Acked-by: Patrice Chotard <patrice.chotard@st.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-04-09 09:52:57 +02:00
Roger Quadros
48130b8f5c mfd: omap-usb-tll: Add device tree support and binding information
Allows the OMAP USB TLL module to be specified via device tree.

Signed-off-by: Roger Quadros <rogerq@ti.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-04-09 09:46:30 +02:00
Roger Quadros
9f4a3ece05 mfd: omap-usb-tll: Move configuration code to omap_tll_init()
This is because we want to get rid of platform_data usage from probe().
The only information we need is PORT_MODE, and this can be supplied
to us by the user (i.e. omap-usb-host.c).

We also move channel clock management from runtime PM handlers into
omap_tll_enable/disable().

Signed-off-by: Roger Quadros <rogerq@ti.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-04-09 09:46:23 +02:00
Tomasz Figa
61dd726131 pinctrl: Add pinctrl-s3c64xx driver
This patch adds pinctrl-s3c64xx driver which implements pin control
interface for Samsung S3C64xx SoCs.

Signed-off-by: Tomasz Figa <tomasz.figa@gmail.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-04-09 09:45:10 +02:00
Tomasz Figa
c16150d846 pinctrl: samsung: Handle banks with two configuration registers
This patch adds support for banks that have more than one function
configuration registers, e.g. some of the banks of S3C64xx SoCs.

Signed-off-by: Tomasz Figa <tomasz.figa@gmail.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-04-09 09:43:39 +02:00
Tomasz Figa
43fc9e7fab pinctrl: samsung: Remove hardcoded register offsets
This patch replaces statically hardcoded register offsets of Exynos SoCs
with an array of register offsets in samsung_pin_bank_type struct.

Thanks to this change, support for SoCs with other set and order of
registers can be added (e.g. S3C24xx and S3C64xx).

Signed-off-by: Tomasz Figa <tomasz.figa@gmail.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-04-09 09:42:25 +02:00
Roger Quadros
662e469e91 mfd: omap-usb-host: Update nports in platform_data
EHCI driver would need to know the number of ports available
on the platform. We set the nports parameter of platform_data
based on IP version if it was not already provided.

Signed-off-by: Roger Quadros <rogerq@ti.com>
Acked-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-04-09 09:42:23 +02:00
Tomasz Figa
499147c9db pinctrl: samsung: Split pin bank description into two structures
This patch splits pin bank description into two structures, one
describing bank type (currently only bitfield widths), which can be
shared across multiple banks and second containing bank-specific
parameters including a pointer to a bank type struct.

It is a prerequisite for further patch removing the statically hardcoded
register offsets, making it impossible to support SoCs with different
set and order of pin control registers.

Signed-off-by: Tomasz Figa <tomasz.figa@gmail.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-04-09 09:41:09 +02:00
Tomasz Figa
d5517bec27 pinctrl: samsung: Include pinctrl-exynos driver data conditionally
Since pinctrl-samsung is a common part of the pin control support for
several Samsung SoCs, it can be compiled without Exynos support enabled.

This patch surrounds Exynos-specific driver data with ifdefs to include
them only when support for Exynos is enabled.

Signed-off-by: Tomasz Figa <tomasz.figa@gmail.com>
[Fixed up EXYNOS4->EXYNOS]
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-04-09 09:39:32 +02:00
Tomasz Figa
198469504a pinctrl: samsung: Protect bank registers with a spinlock
Certain pin control registers can be accessed from different contexts,
i.e. pinctrl, gpio and irq functions. This makes the locking provided by
pin control core insufficient.

This patch adds necessary locking using a per bank spinlock as it was
done in the old Samsung GPIO driver.

Signed-off-by: Tomasz Figa <tomasz.figa@gmail.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-04-09 09:36:42 +02:00
Vineet Gupta
104058ede7 ARC: [build] Allow uncompressed uImage
The existing uImage target always generates gzip compressed image which
drags bootup for some very slow FPGA customer boards.

So introduce seperate make targets:uImage.{bin,gz} with uncompressed
being default. Also tie gz generation to CONFIG_KERNEL_GZIP, which a
platform can select in it's Kconfig if it wishes gz to be default.

Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2013-04-09 12:21:15 +05:30
Vineet Gupta
fb0990bbf5 ARC: [build] cleanup Makefile a bit
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2013-04-09 12:21:15 +05:30
Vineet Gupta
af4c3ae399 ARC: [build] silence make defconfig warnings with host gcc 4.7
We do cross compiles for ARC Linux.
With gcc 4.7, a make defconfig spews out the following:

------------------->8--------------------------
make ARCH=arc defconfig
gcc: error: unrecognized command line option '-marc600'
gcc: error: unrecognized command line option '-mA7'
gcc: error: unrecognized command line option '-mno-sdata'
gcc: error: unrecognized command line option '-mno-mpy'
*** Default configuration is based on 'fpga_defconfig'
------------------->8--------------------------

This apparently is coming from LIBGCC line - which is strange to be
invoked for defconfig generation.

Reported-by: Alexey Brodkin <abrodkin@synopsys.com>
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2013-04-09 12:21:15 +05:30
Paul Bolle
610c6502e0 ARC: remove #ifdef-ed out include of dead header
There's no (Kconfig) macro CONFIG_BLOCK_DEV_RAM. (CONFIG_BLK_DEV_RAM
does exist though.) But linux/blk.h got killed in 2005 anyway (in a
patch titled "kill blk.h"), so these three lines can be removed.

Signed-off-by: Paul Bolle <pebolle@tiscali.nl>
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2013-04-09 12:21:15 +05:30
Sachin Kamat
e420c82d09 ARC: Remove duplicate inclusion of header files
Some header files were included twice in the same file.

Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2013-04-09 12:21:15 +05:30
Sachin Kamat
955ad5959f ARC: Fix coding style issues
Fixes the following coding style issues as detected by checkpatch:
ERROR: space required before the open parenthesis '('
ERROR: "foo * bar" should be "foo *bar"
WARNING: space prohibited between function name and open parenthesis '('
WARNING: please, no spaces at the start of a line

Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2013-04-09 12:21:14 +05:30
Sachin Kamat
1ec9db1056 ARC: Use <linux/*> headers instead of <asm/*>
Silences the following checkpatch warnings:
WARNING: Use #include <linux/ptrace.h> instead of <asm/ptrace.h>
WARNING: Use #include <linux/kprobes.h> instead of <asm/kprobes.h>
WARNING: Use #include <linux/kgdb.h> instead of <asm/kgdb.h>
WARNING: Use #include <linux/uaccess.h> instead of <asm/uaccess.h>
WARNING: Use #include <linux/cache.h> instead of <asm/cache.h>

Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2013-04-09 12:21:14 +05:30
Sachin Kamat
39d0c30d00 ARC: Remove unneeded version.h header include
version.h header file inclusion is not necessary as detected by
versioncheck script.

Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2013-04-09 12:21:14 +05:30
Dylan Reid
78daea29f2 ALSA: hda - Apply codec delay to wallclock.
For playback add the codec-side delay to the timestamp, for capture
subtract it.  This brings the timestamps in line with the time that
was recently added to the delay reporting.

Signed-off-by: Dylan Reid <dgreid@chromium.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-04-09 08:03:22 +02:00
Axel Lin
4cb24e68a5 clk: mvebu: Fix valid value range checking for cpu_freq_select
cpu_freq_select is used as array subscript, thus the valid value range
is 0 ... ARRAY_SIZE() - 1.

Signed-off-by: Axel Lin <axel.lin@ingics.com>
Signed-off-by: Mike Turquette <mturquette@linaro.org>
[mturquette@linaro.org: fixed up trivial merge issues]
2013-04-08 22:26:36 -07:00
Greg Ungerer
b2dfaa8d33 m68k: define a local gpio_request_one() function
Compiling for linux-3.9-rc1 and later fails with:

drivers/gpio/devres.c: In function 'devm_gpio_request_one':
drivers/gpio/devres.c:90:2: error: implicit declaration of function 'gpio_request_one' [-Werror=implicit-function-declaration]

So provide a local gpio_request_one() function. Code largely borrowed from
blackfin's local gpio_request_one() function.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
2013-04-09 15:15:31 +10:00
Kirill Tkhai
07df841877 sparc64: Do not save/restore interrupts in get_new_mmu_context()
get_new_mmu_context() is always called with interrupts disabled.
So it's possible to do this micro optimization.

(Also fix the comment to switch_mm, which is called in both cases)

Signed-off-by: Kirill Tkhai <tkhai@yandex.ru>
CC: David Miller <davem@davemloft.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-08 22:50:47 -04:00
Wei Yongjun
c802d75962 netrom: fix invalid use of sizeof in nr_recvmsg()
sizeof() when applied to a pointer typed expression gives the size of the
pointer, not that of the pointed data.
Introduced by commit 3ce5ef(netrom: fix info leak via msg_name in nr_recvmsg)

Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-08 22:49:23 -04:00
Trond Myklebust
7a8203d8cb NFS: Ensure that NFS file unlock waits for readahead to complete
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2013-04-08 22:12:42 -04:00
Trond Myklebust
577b42327d NFS: Add functionality to allow waiting on all outstanding reads to complete
This will later allow NFS locking code to wait for readahead to complete
before releasing byte range locks.

Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2013-04-08 22:12:33 -04:00
Linus Torvalds
84ee9805bc An hwspinlock fix from Li Fei, taking care of a faulty error path.
-----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.11 (GNU/Linux)
 
 iQIcBAABAgAGBQJRYtV4AAoJELLolMlTRIoMMvMQAJkOuuxnBJKovFoW/HxI2V+W
 cELQUyn397K3z2lAv9CYOEIIFJO3xA7AmF+WjnJMy/LKyFYNYkrfn3rUCbUu4q+x
 1ifnsonvsRJPHw8I6TAgPqKCG79CaNYig3S3N98iorsUmzXTNgu7G1wG1VpGbemf
 iqWAbkuONCllJltTctEuFqWLtHnm9SXGNpcqcJDa348A6Yc5YscewgrgzrfTE5OZ
 S4qmx0QRgAzZPhghrZbthyYG/s2XfH2CUxZSxwO78rHnwkdJydSHwFUAHJKVQSTe
 yyJI5uVobliGcmUX0u2BtXNKob5YntMshbwOzs3uwElG9SY3rnYEwKMIrxv3jk+7
 EUQNCseCsH/k3OjBmdLX5uVboGwf/zCV5yLGWaNXYmZ2pAxnaFms5+Hz24ggO+r6
 Yy1CYFXXJB2mdQUpMlktFiRh3YNklKLk8FWKHRyTO2m/nXlJQ3au9IonqpqVoQGZ
 SabNStvslQ1pbgBLRhBjWl8H6kL/vKlzRI7O6rCpE7nbS3RBn2jhmk8baZqAUA1T
 GIsucqKImdnV1SPbV/y74/gi/MfOZ/qgPVlLduzBrdByeFqPQQMVnAA0BnlKzVqr
 s5yo7Oe3ecIhOl0a/1hKsPLgQymeyp3y+6NBAIQwOU1FWhF+6v0NuIa2CaNxNWO8
 2G2f6UorIPyEXc3K3vlA
 =7IMq
 -----END PGP SIGNATURE-----

Merge tag 'hwspinlock-3.9-fix' of git://git.kernel.org/pub/scm/linux/kernel/git/ohad/hwspinlock

Pull a hwspinlock fix from Ohad Ben-Cohen:
 "An hwspinlock fix from Li Fei, taking care of a faulty error path."

* tag 'hwspinlock-3.9-fix' of git://git.kernel.org/pub/scm/linux/kernel/git/ohad/hwspinlock:
  hwspinlock: fix __hwspin_lock_request error path
2013-04-08 18:53:57 -07:00