Commit graph

506,942 commits

Author SHA1 Message Date
Jean-Christophe PLAGNIOL-VILLARD
beca9e767e iio: at91_adc: fix missing Sample and Hold time
On the at91_adc a minimal Sample and Hold Time is necessary for the ADC to
guarantee the best converted final value between two channels selection.
This time has to be programmed through the bitfield SHTIM in the
Mode Register ADC_MR.

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2013-04-02 19:22:16 +01:00
Jean-Christophe PLAGNIOL-VILLARD
e748783c55 iio: at91_adc: add sleep mode support
The sleep mode will allow to put the adc in sleep between conversion.

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com>
Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2013-04-02 19:17:39 +01:00
Ludovic Desroches
47be16b668 iio: at91_adc: add low and high res support
at91 adc offers the choice between two resolutions: low and high.
The low and high resolution values depends on adc IP version, as many IP
properties have been exposed through device tree, these settings have also
been added to the dt bindings.

Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com>
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2013-04-02 19:17:26 +01:00
Maxime Ripard
ebafed7ab9 ARM: irq: Call irqchip_init if no init_irq function is specified
More and more sub-architectures are using only the irqchip_init
function. Make the core code call this function if no init_irq field is
provided in the machine description to remove some boilerplate code.

Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Acked-by: Rob Herring <rob.herring@calxeda.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
2013-04-02 11:05:40 -07:00
Konrad Rzeszutek Wilk
b22227944b xen/mmu: On early bootup, flush the TLB when changing RO->RW bits Xen provided pagetables.
Occassionaly on a DL380 G4 the guest would crash quite early with this:

(XEN) d244:v0: unhandled page fault (ec=0003)
(XEN) Pagetable walk from ffffffff84dc7000:
(XEN)  L4[0x1ff] = 00000000c3f18067 0000000000001789
(XEN)  L3[0x1fe] = 00000000c3f14067 000000000000178d
(XEN)  L2[0x026] = 00000000dc8b2067 0000000000004def
(XEN)  L1[0x1c7] = 00100000dc8da067 0000000000004dc7
(XEN) domain_crash_sync called from entry.S
(XEN) Domain 244 (vcpu#0) crashed on cpu#3:
(XEN) ----[ Xen-4.1.3OVM  x86_64  debug=n  Not tainted ]----
(XEN) CPU:    3
(XEN) RIP:    e033:[<ffffffff81263f22>]
(XEN) RFLAGS: 0000000000000216   EM: 1   CONTEXT: pv guest
(XEN) rax: 0000000000000000   rbx: ffffffff81785f88   rcx: 000000000000003f
(XEN) rdx: 0000000000000000   rsi: 00000000dc8da063   rdi: ffffffff84dc7000

The offending code shows it to be a loop writting the value zero
(%rax) in the %rdi (the L4 provided by Xen) register:

   0: 44 00 00             add    %r8b,(%rax)
   3: 31 c0                 xor    %eax,%eax
   5: b9 40 00 00 00       mov    $0x40,%ecx
   a: 66 0f 1f 84 00 00 00 nopw   0x0(%rax,%rax,1)
  11: 00 00
  13: ff c9                 dec    %ecx
  15:* 48 89 07             mov    %rax,(%rdi)     <-- trapping instruction
  18: 48 89 47 08           mov    %rax,0x8(%rdi)
  1c: 48 89 47 10           mov    %rax,0x10(%rdi)

which fails. xen_setup_kernel_pagetable recycles some of the Xen's
page-table entries when it has switched over to its Linux page-tables.

Right before try to clear the page, we  make a hypercall to change
it from _RO to  _RW and that works (otherwise we would hit an BUG()).
And the _RW flag is set for that page:
(XEN)  L1[0x1c7] = 001000004885f067 0000000000004dc7

The error code is 3, so PFEC_page_present and PFEC_write_access, so page is
present (correct), and we tried to write to the page, but a violation
occurred. The one theory is that the the page entries in hardware
(which are cached) are not up to date with what we just set. Especially
as we have just done an CR3 write and flushed the multicalls.

This patch does solve the problem by flusing out the TLB page
entry after changing it from _RO to _RW and we don't hit this
issue anymore.

Fixed-Oracle-Bug: 16243091 [ON OCCASIONS VM START GOES INTO
'CRASH' STATE: CLEAR_PAGE+0X12 ON HP DL380 G4]
Reported-and-Tested-by: Saar Maoz <Saar.Maoz@oracle.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2013-04-02 14:02:23 -04:00
Keir Fraser
bee980d9e9 xen/events: Handle VIRQ_TIMER before any other hardirq in event loop.
This avoids any other hardirq handler seeing a very stale jiffies
value immediately after wakeup from a long idle period. The one
observable symptom of this was a USB keyboard, with software keyboard
repeat, which would always repeat a key immediately that it was
pressed. This is due to the key press waking the guest, the key
handler immediately runs, sees an old jiffies value, and then that
jiffies value significantly updated, before the key is unpressed.

Reviewed-by: David Vrabel <david.vrabel@citrix.com>
Signed-off-by: Keir Fraser <keir.fraser@citrix.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2013-04-02 14:01:21 -04:00
Olof Johansson
c2573077df Merge branch 'gic' of git://git.kernel.org/pub/scm/linux/kernel/git/cmarinas/linux-aarch64 into next/cleanup
* 'gic' of git://git.kernel.org/pub/scm/linux/kernel/git/cmarinas/linux-aarch64:
  irqchip: gic: Perform the gic_secondary_init() call via CPU notifier
  irqchip: gic: Call handle_bad_irq() directly
  arm: Move chained_irq_(enter|exit) to a generic file
  arm: Move the set_handle_irq and handle_arch_irq declarations to asm/irq.h
  + Linux 3.9-rc3

Signed-off-by: Olof Johansson <olof@lixom.net>
2013-04-02 10:59:28 -07:00
Padmavathi Venna
0b94c57717 DMA: PL330: Add check if device tree compatible
This patch register the dma controller with generic dma helpers only
in DT case. This also adds some extra error handling in the driver.

Signed-off-by: Padmavathi Venna <padma.v@samsung.com>
Reported-by: Sachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2013-04-02 23:11:04 +05:30
Jonathan Cameron
2fc72cd835 iio:magnetometer:ak8975 move driver out of staging
Issues raised in last series to propose this have now been resolved
so there should be no reason this driver cannot graduate from staging.

Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Acked-by: Laxman Dewangan <ldewangan@nvidia.com>
2013-04-02 18:36:47 +01:00
Jonathan Cameron
c411f600ce staging:iio:magnetometer:ak8975 use standard i2c_smbus read functions.
Now the mysterious NOSTART flag is gone from the read, we can use the
i2c_smbus_read_byte/word/i2c_block_data functions instead of the
local reimplementation of these standard functions.

Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Acked-by: Laxman Dewangan <ldewangan@nvidia.com>
2013-04-02 18:36:35 +01:00
Jonathan Cameron
aa9922579f staging:iio:magnetometer:ak8975 drop I2C_M_NOSTART flag in read_data
This flag makes no sense whatsoever where it is.
Documentation/i2c/i2c-protocol states:

  If you set the I2C_M_NOSTART variable for the first partial message,
  we do not generate Addr, but we do generate the startbit S. This will
  probably confuse all other clients on your bus, so don't try this.

This is exactly what is going on here.  Likelihood given that the
driver never checked for this protocol mangling being available is that
it wasn't present on the test boards and hence this flag was simply
ignored.  No indication of why it would be necessary has been found in
the datasheets.

Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Acked-by: Laxman Dewangan <ldewangan@nvidia.com>
2013-04-02 18:36:24 +01:00
Jonathan Cameron
dea120e665 staging:iio:magnetometer:ak8975 drop unused eoc_irq
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Acked-by: Laxman Dewangan <ldewangan@nvidia.com>
2013-04-02 18:35:57 +01:00
Mike Turquette
533ddeb1e8 clk: allow reentrant calls into the clk framework
Reentrancy into the clock framework is necessary for clock operations
that result in nested calls to the clk api.  A common example is a clock
that is prepared via an i2c transaction, such as a clock inside of a
discrete audio chip or a power management IC.  The i2c subsystem itself
will use the clk api resulting in a deadlock:

clk_prepare(audio_clk)
	i2c_transfer(..)
		clk_prepare(i2c_controller_clk)

The ability to reenter the clock framework prevents this deadlock.

Other use cases exist such as allowing .set_rate callbacks to call
clk_set_parent to achieve the best rate, or to save power in certain
configurations.  Yet another example is performing pinctrl operations
from a clk_ops callback.  Calls into the pinctrl subsystem may call
clk_{un}prepare on an unrelated clock.  Allowing for nested calls to
reenter the clock framework enables both of these use cases.

Reentrancy is implemented by two global pointers that track the owner
currently holding a global lock.  One pointer tracks the owner during
sleepable, mutex-protected operations and the other one tracks the owner
during non-interruptible, spinlock-protected operations.

When the clk framework is entered we try to hold the global lock.  If it
is held we compare the current task against the current owner; a match
implies a nested call and we reenter.  If the values do not match then
we block on the lock until it is released.

Signed-off-by: Mike Turquette <mturquette@linaro.org>
Cc: Rajagopal Venkat <rajagopal.venkat@linaro.org>
Cc: David Brown <davidb@codeaurora.org>
Tested-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
2013-04-02 10:23:41 -07:00
Mike Turquette
eab89f690e clk: abstract locking out into helper functions
Create locking helpers for the global mutex and global spinlock.  The
definitions of these helpers will be expanded upon in the next patch
which introduces reentrancy into the locking scheme.

Signed-off-by: Mike Turquette <mturquette@linaro.org>
Cc: Rajagopal Venkat <rajagopal.venkat@linaro.org>
Cc: David Brown <davidb@codeaurora.org>
Tested-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
2013-04-02 10:23:08 -07:00
Tony Prisk
806a94f20c arm: vt8500: Add wm8850 config options to multi_v7_defconfig
This patch finally adds the WM8850 SoC to the multi_v7_defconfig.
We don't have a seperate defconfig for this SoC as it is only
available as a multiplatform option.

Signed-off-by: Tony Prisk <linux@prisktech.co.nz>
Signed-off-by: Olof Johansson <olof@lixom.net>
2013-04-02 10:19:55 -07:00
Borislav Petkov
7d7dc116e5 x86, cpu: Convert AMD Erratum 400
Convert AMD erratum 400 to the bug infrastructure. Then, retract all
exports for modules since they're not needed now and make the AMD
erratum checking machinery local to amd.c. Use forward declarations to
avoid shuffling too much code around needlessly.

Signed-off-by: Borislav Petkov <bp@suse.de>
Link: http://lkml.kernel.org/r/1363788448-31325-7-git-send-email-bp@alien8.de
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2013-04-02 10:12:55 -07:00
Borislav Petkov
e6ee94d58d x86, cpu: Convert AMD Erratum 383
Convert the AMD erratum 383 testing code to the bug infrastructure. This
allows keeping the AMD-specific erratum testing machinery private to
amd.c and not export symbols to modules needlessly.

Signed-off-by: Borislav Petkov <bp@suse.de>
Link: http://lkml.kernel.org/r/1363788448-31325-6-git-send-email-bp@alien8.de
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2013-04-02 10:12:54 -07:00
Borislav Petkov
c5b41a6750 x86, cpu: Convert Cyrix coma bug detection
... to the new facility.

Signed-off-by: Borislav Petkov <bp@suse.de>
Link: http://lkml.kernel.org/r/1363788448-31325-5-git-send-email-bp@alien8.de
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2013-04-02 10:12:54 -07:00
Borislav Petkov
93a829e8e2 x86, cpu: Convert FDIV bug detection
... to the new facility. Add a reference to the wikipedia article
explaining the FDIV test we're doing here.

Signed-off-by: Borislav Petkov <bp@suse.de>
Link: http://lkml.kernel.org/r/1363788448-31325-4-git-send-email-bp@alien8.de
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2013-04-02 10:12:53 -07:00
Borislav Petkov
e2604b49e8 x86, cpu: Convert F00F bug detection
... to using the new facility and drop the cpuinfo_x86 member.

Signed-off-by: Borislav Petkov <bp@suse.de>
Link: http://lkml.kernel.org/r/1363788448-31325-3-git-send-email-bp@alien8.de
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2013-04-02 10:12:52 -07:00
Borislav Petkov
65fc985b37 x86, cpu: Expand cpufeature facility to include cpu bugs
We add another 32-bit vector at the end of the ->x86_capability
bitvector which collects bugs present in CPUs. After all, a CPU bug is a
kind of a capability, albeit a strange one.

Signed-off-by: Borislav Petkov <bp@suse.de>
Link: http://lkml.kernel.org/r/1363788448-31325-2-git-send-email-bp@alien8.de
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2013-04-02 10:12:52 -07:00
Stanislav Kinsbursky
2dc958fa2f ipc: set msg back to -EAGAIN if copy wasn't performed
Make sure that msg pointer is set back to error value in case of
MSG_COPY flag is set and desired message to copy wasn't found.  This
garantees that msg is either a error pointer or a copy address.

Otherwise the last message in queue will be freed without unlinking from
the queue (which leads to memory corruption) and the dummy allocated
copy won't be released.

Signed-off-by: Stanislav Kinsbursky <skinsbursky@parallels.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-04-02 10:09:01 -07:00
Roger Quadros
2e5f78aece ARM: dts: omap3-beagle: Add USB Host support
Provide RESET and Power regulators for the USB PHY,
the USB Host port mode and the PHY device.

Also provide pin multiplexer information for USB host
pins.

CC: Benoît Cousson <b-cousson@ti.com>
Signed-off-by: Roger Quadros <rogerq@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2013-04-02 10:00:04 -07:00
Roger Quadros
af3eb366ae ARM: dts: OMAP3: Add HS USB Host IP nodes
Adds device nodes for HS USB Host module, TLL module,
OHCI and EHCI controllers.

CC: Benoît Cousson <b-cousson@ti.com>
Signed-off-by: Roger Quadros <rogerq@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2013-04-02 10:00:03 -07:00
Roger Quadros
f17c89948d ARM: dts: OMAP4: Add HS USB Host IP nodes
Adds device nodes for HS USB Host module, TLL module,
OHCI and EHCI controllers.

CC: Benoît Cousson <b-cousson@ti.com>
Signed-off-by: Roger Quadros <rogerq@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2013-04-02 10:00:02 -07:00
Roger Quadros
9b9208675d ARM: OMAP: zoom: Adapt to ehci-omap changes
Use usbhs_init_phys() to register the PHY's RESET regulator
and the NOP PHY device.

Signed-off-by: Roger Quadros <rogerq@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2013-04-02 10:00:02 -07:00
Roger Quadros
14c67d2309 ARM: OMAP3: overo: Adapt to ehci-omap changes
Use usbhs_init_phys() to register the PHY's RESET regulator
and the NOP PHY device.

Signed-off-by: Roger Quadros <rogerq@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2013-04-02 10:00:01 -07:00
Roger Quadros
3da6ca3596 ARM: OMAP3: omap3touchbook: Adapt to ehci-omap changes
Use usbhs_init_phys() to register the PHY's RESET regulator
and the NOP PHY device.

Signed-off-by: Roger Quadros <rogerq@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2013-04-02 10:00:01 -07:00
Roger Quadros
af29470bdb ARM: OMAP3: omap3stalker: Adapt to ehci-omap changes
Use usbhs_init_phys() to register the PHY's RESET regulator
and the NOP PHY device.

Signed-off-by: Roger Quadros <rogerq@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2013-04-02 10:00:00 -07:00
Roger Quadros
08a15fe857 ARM: OMAP3: omap3pandora: Adapt to ehci-omap changes
Use usbhs_init_phys() to register the PHY's RESET regulator
and NOP PHY device. VAUX2 supplies the PHY's VCC.

Signed-off-by: Roger Quadros <rogerq@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2013-04-02 09:59:59 -07:00
Roger Quadros
6ef818ee35 ARM: OMAP3: omap3evm: Adapt to ehci-omap changes
Use usbhs_init_phys() to register the PHY's RESET regulator
and the NOP PHY device. VAUX2 supplies the PHY's VCC.

Signed-off-by: Roger Quadros <rogerq@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2013-04-02 09:59:59 -07:00
Roger Quadros
9c4d678e74 ARM: OMAP3: igep0020: Adapt to ehci-omap changes
Use usbhs_init_phys() to register the PHY's RESET regulators
and the NOP PHY devices.

Signed-off-by: Roger Quadros <rogerq@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2013-04-02 09:59:58 -07:00
Roger Quadros
e3d38f9b07 ARM: OMAP: devkit8000: Adapt to ehci-omap changes
Remove deprecated USBHS platform data.

Signed-off-by: Roger Quadros <rogerq@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2013-04-02 09:59:57 -07:00
Roger Quadros
a0409c9ae1 ARM: OMAP3: cm-t3517: Adapt to ehci-omap changes
Use usbhs_init_phys() to register the PHY's RESET regulators
and the NOP PHY devices.

Signed-off-by: Roger Quadros <rogerq@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2013-04-02 09:59:57 -07:00
Roger Quadros
59b1499a70 ARM: OMAP3: cm-t35: Adapt to ehci-omap changes
Use usbhs_init_phys() to register the PHY's RESET regulators
and the NOP PHY devices.

Signed-off-by: Roger Quadros <rogerq@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2013-04-02 09:59:56 -07:00
Roger Quadros
9413624c25 ARM: OMAP: AM3517evm: Adapt to ehci-omap changes
Use usbhs_init_phys() to register the PHY's RESET regulators
and the NOP PHY device.

Signed-off-by: Roger Quadros <rogerq@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2013-04-02 09:59:55 -07:00
Roger Quadros
4a2ee5da83 ARM: OMAP: AM3517crane: Adapt to ehci-omap changes
Use usbhs_init_phys() to register the PHY's VCC and RESET
regulators and the NOP PHY device.

Signed-off-by: Roger Quadros <rogerq@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2013-04-02 09:59:55 -07:00
Roger Quadros
63e135a75f ARM: OMAP3: 3630SDP: Adapt to ehci-omap changes
Use usbhs_init_phys() to register the PHY's RESET regulators
and the NOP PHY devices.

Signed-off-by: Roger Quadros <rogerq@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2013-04-02 09:59:54 -07:00
Roger Quadros
0047c909fb ARM: OMAP3: 3430SDP: Adapt to ehci-omap changes
Use usbhs_init_phys() to register the PHY's RESET regulators
and the NOP PHY devices.

Signed-off-by: Roger Quadros <rogerq@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2013-04-02 09:59:54 -07:00
Roger Quadros
60226717fe ARM: OMAP3: Beagle: Adapt to ehci-omap changes
Use usbhs_init_phys() to register the PHY's VCC and RESET
regulators and the NOP PHY device.

Signed-off-by: Roger Quadros <rogerq@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2013-04-02 09:59:53 -07:00
Roger Quadros
84337b6333 ARM: OMAP2+: omap4panda: Adapt to ehci-omap changes
Use usbhs_init_phys() to register the PHY's VCC and RESET
regulators and the NOP PHY device.

Get rid of managing the PHY clock as it will be done by the PHY driver.
For that to work we create a clock alias that links the PHY clock name
to the PHY device name.

Signed-off-by: Roger Quadros <rogerq@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2013-04-02 09:59:52 -07:00
Roger Quadros
5ecd52e563 ARM: OMAP2+: omap-usb-host: Add usbhs_init_phys()
This helper allows board support code to add the PHY's
VCC and RESET regulators which are GPIO controlled as well
as the NOP PHY device.

Signed-off-by: Roger Quadros <rogerq@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2013-04-02 09:59:52 -07:00
Xishi Qiu
797f6a684f Add size restriction to the kdump documentation
In efi_init() memory aligns in IA64_GRANULE_SIZE(16M). If set "crashkernel=1024M-:600M"
and use sparse memory model, when crash kernel booting it changes [128M-728M] to [128M-720M].

But initrd memory is in [709M-727M], and virt_addr_valid() *can not* check the invalid pages
when freeing initrd memory, because there are some pages missed at the end of the section,
and this causes error.

...
Unpacking initramfs...
Freeing initrd memory: 19648kB freed
BUG: Bad page state in process swapper  pfn:02d00
page:e0000000102dd800 flags:(null) count:0 mapcount:1 mapping:(null) index:0

Call Trace:
 [<a000000100018dc0>] show_stack+0x80/0xa0
                                sp=e000000021e8fbd0 bsp=e000000021e81360
 [<a00000010090fcc0>] dump_stack+0x30/0x50
                                sp=e000000021e8fda0 bsp=e000000021e81348
 [<a0000001001a3180>] bad_page+0x280/0x380
                                sp=e000000021e8fda0 bsp=e000000021e81308
 [<a0000001001a8740>] free_hot_cold_page+0x3a0/0x5c0
                                sp=e000000021e8fda0 bsp=e000000021e812a0
 [<a0000001001a8a50>] free_hot_page+0x30/0x60
                                sp=e000000021e8fda0 bsp=e000000021e81280
 [<a0000001001a8b30>] __free_pages+0xb0/0xe0
                                sp=e000000021e8fda0 bsp=e000000021e81258
 [<a0000001001a8c00>] free_pages+0xa0/0xc0
                                sp=e000000021e8fda0 bsp=e000000021e81230
 [<a000000100bb40c0>] free_initrd_mem+0x230/0x290
                                sp=e000000021e8fda0 bsp=e000000021e811d8
 [<a000000100ba6620>] populate_rootfs+0x1c0/0x280
                                sp=e000000021e8fdb0 bsp=e000000021e811a0
 [<a00000010000ac30>] do_one_initcall+0x3b0/0x3e0
                                sp=e000000021e8fdb0 bsp=e000000021e81158
 [<a000000100ba0a90>] kernel_init+0x3f0/0x4b0
                                sp=e000000021e8fdb0 bsp=e000000021e81108
 [<a000000100016890>] kernel_thread_helper+0xd0/0x100
                                sp=e000000021e8fe30 bsp=e000000021e810e0
 [<a00000010000a4c0>] start_kernel_thread+0x20/0x40
                                sp=e000000021e8fe30 bsp=e000000021e810e0
...

In "http://marc.info/?l=linux-arch&m=136147092429314&w=2" Tony said:
"Perhaps in Documentation/kdump/kdump.txt (which the crashkernel entry
in kernel-parameters.txt points at).  The ia64 section of kdump.txt
notes that the start address will be rounded up to a GRANULE boundary,
but doesn't talk about restrictions on the size."

This patch add size restriction to the documentation of kdump.

Signed-off-by: Xishi Qiu <qiuxishi@huawei.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
2013-04-02 09:40:03 -07:00
Xie XiuQi
83d435dd6e Fix example error_injection_tool
I got a "sched_setaffinity:: Invalid argument" error when using
err_injection_tool to inject error on a system with over 32 cpus.

Error information when injecting an error on a system with over 32 cpus:
$ ./err_injection_tool -i
/sys/devices/system/cpu/cpu0/err_inject//err_type_info
Begine at Tue Mar 26 11:20:08 2013
Configurations:
On cpu32: loop=10, interval=5(s) err_type_info=4101,err_struct_info=95
Error sched_setaffinity:: Invalid argument
All done

This because there is overflow when calculating the cpumask: the
type of (1<<k) is int, while mask[j] is unsigned long. When k > 31,
(1<<k) is truncated to ZERO, resulting in a unexpected cpumask.

Signed-off-by: Xie XiuQi <xiexiuqi@huawei.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
2013-04-02 09:39:55 -07:00
Yijing Wang
eee46b3de7 Fix build error for numa_clear_node() under IA64
numa_clear_node() function is not implemented under IA64,
it will be called in unmap_cpu_on_node() in mm/memory_hotplug.c.
This cause build error under IA64, this patch adds numa_clear_node()
in IA64 to fix this problem.

[Added __cpuinit notation to numa_clear_node() to keep linker happy -Tony]

Signed-off-by: Yijing Wang <wangyijing@huawei.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
2013-04-02 09:39:48 -07:00
Sachin Kamat
46f101df78 irqchip: irq-gic: Fix checkpatch errors
Fixes the following errors:
ERROR: do not initialise statics to 0 or NULL
ERROR: space required after that ',' (ctx:VxV)

Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: Olof Johansson <olof@lixom.net>
2013-04-02 09:38:22 -07:00
Tony Luck
d303e9e98f Fix initialization of CMCI/CMCP interrupts
Back 2010 during a revamp of the irq code some initializations
were moved from ia64_mca_init() to ia64_mca_late_init() in

	commit c75f2aa13f
	Cannot use register_percpu_irq() from ia64_mca_init()

But this was hideously wrong. First of all these initializations
are now down far too late. Specifically after all the other cpus
have been brought up and initialized their own CMC vectors from
smp_callin(). Also ia64_mca_late_init() may be called from any cpu
so the line:
	ia64_mca_cmc_vector_setup();       /* Setup vector on BSP */
is generally not executed on the BSP, and so the CMC vector isn't
setup at all on that processor.

Make use of the arch_early_irq_init() hook to get this code executed
at just the right moment: not too early, not too late.

Reported-by: Fred Hartnett <fred.hartnett@hp.com>
Tested-by: Fred Hartnett <fred.hartnett@hp.com>
Cc: stable@kernel.org # v2.6.37+
Signed-off-by: Tony Luck <tony.luck@intel.com>
2013-04-02 09:37:06 -07:00
Varun Sethi
80f97f0f73 iommu/fsl: Add the window permission flag as a parameter to iommu_window_enable API.
Each iommu window can have access permissions associated with it. Extended the
window_enable API to incorporate window access permissions.

In case of PAMU each window can have its specific set of permissions.

Signed-off-by: Varun Sethi <Varun.Sethi@freescale.com>
Signed-off-by: Joerg Roedel <joro@8bytes.org>
2013-04-02 18:20:53 +02:00
Varun Sethi
bb5547acfc iommu/fsl: Make iova dma_addr_t in the iommu_iova_to_phys API.
This is required in case of PAMU, as it can support a window size of up
to 64G (even on 32bit).

Signed-off-by: Varun Sethi <Varun.Sethi@freescale.com>
Signed-off-by: Joerg Roedel <joro@8bytes.org>
2013-04-02 18:20:53 +02:00
Eric Dumazet
4a0b5ec12f bridge: remove a redundant synchronize_net()
commit 00cfec3748 (net: add a synchronize_net() in
netdev_rx_handler_unregister())
allows us to remove the synchronized_net() call from del_nbp()

Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Veaceslav Falico <vfalico@redhat.com>
Cc: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Veaceslav Falico <vfalico@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-02 12:10:58 -04:00