Commit graph

506,942 commits

Author SHA1 Message Date
Johannes Berg
7b4396bd68 mac80211: flush keys when stopping AP
Since hostapd will remove keys this isn't usually
an issue, but we shouldn't leak keys to the next
BSS started on the same interface. For VLANs this
also fixes a bug, keys that aren't removed would
otherwise be leaked.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-03-06 16:36:00 +01:00
Johannes Berg
8d1f7ecd2a mac80211: defer tailroom counter manipulation when roaming
During roaming, the crypto_tx_tailroom_needed_cnt counter
will often take values 2,1,0,1,2 because first keys are
removed and then new keys are added. This is inefficient
because during the 0->1 transition, synchronize_net must
be called to avoid packet races, although typically no
packets would be flowing during that time.

To avoid that, defer the decrement (2->1, 1->0) when keys
are removed (by half a second). This means the counter
will really have the values 2,2,2,3,4 ... 2, thus never
reaching 0 and having to do the 0->1 transition.

Note that this patch entirely disregards the drivers for
which this optimisation was done to start with, for them
the key removal itself will be expensive because it has
to synchronize_net() after the counter is incremented to
remove the key from HW crypto. For them the sequence will
look like this: 0,1,0,1,0,1,0,1,0 (*) which is clearly a
lot more inefficient. This could be addressed separately,
during key removal the 0->1->0 sequence isn't necessary.

(*) it starts at 0 because HW crypto is on, then goes to
    1 when HW crypto is disabled for a key, then back to
    0 because the key is deleted; this happens for both
    keys in the example. When new keys are added, it goes
    to 1 first because they're added in software; when a
    key is moved to hardware it goes back to 0

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-03-06 16:36:00 +01:00
Johannes Berg
a87121051c mac80211: remove IEEE80211_KEY_FLAG_WMM_STA
There's no driver using this flag, so it seems
that all drivers support HW crypto with WMM or
don't support it at all. Remove the flag and
code setting it.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-03-06 16:35:59 +01:00
Stanislaw Gruszka
153a5fc410 mac80211: merge reconfig assign chanctx code
Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-03-06 16:35:58 +01:00
Stanislaw Gruszka
690205f18f mac80211: cleanup suspend/resume on mesh mode
Remove not used any longer suspend/resume code.

Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-03-06 16:35:58 +01:00
Stanislaw Gruszka
a61829437e mac80211: cleanup suspend/resume on ibss mode
Remove not used any longer suspend/resume code.

Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-03-06 16:35:57 +01:00
Stanislaw Gruszka
9b7d72c104 mac80211: cleanup suspend/resume on managed mode
Remove not used any longer suspend/resume code.

Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-03-06 16:35:56 +01:00
Stanislaw Gruszka
12e7f51702 mac80211: cleanup generic suspend/resume procedures
Since now we disconnect before suspend, various code which save
connection state can now be removed from suspend and resume
procedure. Cleanup on resume side is smaller as ieee80211_reconfig()
is also used for H/W restart.

Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-03-06 16:35:56 +01:00
Stanislaw Gruszka
8125696991 cfg80211/mac80211: disconnect on suspend
If possible that after suspend, cfg80211 will receive request to
disconnect what require action on interface that was removed during
suspend.

Problem can manifest itself by various warnings similar to below one:

WARNING: at net/mac80211/driver-ops.h:12 ieee80211_bss_info_change_notify+0x2f9/0x300 [mac80211]()
wlan0:  Failed check-sdata-in-driver check, flags: 0x4
Call Trace:
 [<c043e0b3>] warn_slowpath_fmt+0x33/0x40
 [<f83707c9>] ieee80211_bss_info_change_notify+0x2f9/0x300 [mac80211]
 [<f83a660a>] ieee80211_recalc_ps_vif+0x2a/0x30 [mac80211]
 [<f83a6706>] ieee80211_set_disassoc+0xf6/0x500 [mac80211]
 [<f83a9441>] ieee80211_mgd_deauth+0x1f1/0x280 [mac80211]
 [<f8381b36>] ieee80211_deauth+0x16/0x20 [mac80211]
 [<f8261e70>] cfg80211_mlme_down+0x70/0xc0 [cfg80211]
 [<f8264de1>] __cfg80211_disconnect+0x1b1/0x1d0 [cfg80211]

To fix the problem disconnect from any associated network before
suspend. User space is responsible to establish connection again
after resume. This basically need to be done by user space anyway,
because associated stations can go away during suspend (for example
NetworkManager disconnects on suspend and connect on resume by default).

Patch also handle situation when driver refuse to suspend with wowlan
configured and try to suspend again without it.

Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-03-06 16:35:55 +01:00
Stanislaw Gruszka
30c97120c6 mac80211: remove napi
Since two years no mac80211 driver implement support for NAPI. Looks
this feature is unneeded, so remove it from generic mac80211 code.

Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-03-06 16:35:54 +01:00
Felix Fietkau
098b8afbf2 mac80211/minstrel_ht: fix spacing between sample attempts
A sample attempt should only count in mi->sample_tries if the sample
attempt wasn't skipped based on slower rate criteria.
This patch increases the sampling frequency for potentially desirable
rates and thus enables faster recovery from interference or collisions.

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-03-06 16:35:54 +01:00
Felix Fietkau
965237ab9f mac80211/minstrel_ht: increase sampling frequency of some slower rates
If a rate is below the max_tp_rate, sample it frequently if:
- it is above max_tp_rate2, or
- it is above max_prob_rate and is a candidate for max_prob_rate
  (has fewer streams than max_tp_rate).
This helps the retry chain recover more quickly from bad statistics
caused by collisions or interference, and slightly reduces throughput
fluctuations with higher rates.

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-03-06 16:35:53 +01:00
Felix Fietkau
96d4ac3f2f minstrel_ht: increase sampling frequency
Try to sample all available rates, as sample attempts do not cost much
airtime and are appropriately spaced based on the average A-MPDU length.
This helps with faster recovery on rate fluctuations.

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-03-06 16:35:53 +01:00
Felix Fietkau
a299c6d591 mac80211/minstrel_ht: improve max_prob_rate selection
max_prob_rate should be selected to be very reliable, however limiting
it to single-stream on 3-stream devices is a bit much.
Allow max_prob_rate to use one stream less than the max_tp_rate.

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-03-06 16:35:52 +01:00
Felix Fietkau
ed97a13c54 mac80211/minstrel_ht: improve accuracy of throughput metric at high data rates
At high data rates the average frame transmission durations are small
enough for rounding errors to matter, sometimes causing minstrel to use
slightly lower transmit rates than necessary.
To fix this, change the unit of the duration value to nanoseconds
instead of microseconds, and reorder the multiplications/divisions when
calculating the throughput metric so that they don't overflow or
truncate prematurely.
At 2-stream HT40 this makes TCP throughput a bit more stable.

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-03-06 16:35:51 +01:00
Jouni Malinen
355199e02b cfg80211: Extend support for IEEE 802.11r Fast BSS Transition
Add NL80211_CMD_UPDATE_FT_IES to support update of FT IEs to the WLAN
driver and NL80211_CMD_FT_EVENT to send FT events from the WLAN driver.
This will carry the target AP's MAC address along with the relevant
Information Elements. This event is used to report received FT IEs
(MDIE, FTIE, RSN IE, TIE, RICIE). These changes allow FT to be supported
with drivers that use an internal SME instead of user space option (like
FT implementation in wpa_supplicant with mac80211-based drivers).

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-03-06 16:35:51 +01:00
Johannes Berg
723d568aa5 cfg80211: prohibit zero keepalive interval
It's not useful to specify a 0 keepalive interval, this
would send too much data. Prohibit this to also avoid
device issues.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-03-06 16:35:50 +01:00
Ilan Peer
d339d5ca8e mac80211: Allow drivers to differentiate between ROC types
Some devices can handle remain on channel requests differently
based on the request type/priority. Add support to
differentiate between different ROC types, i.e., indicate that
the ROC is required for sending managment frames.

Signed-off-by: Ilan Peer <ilan.peer@intel.com>
Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-03-06 16:35:49 +01:00
Johannes Berg
f62fab735e cfg80211: refactor association parameters
cfg80211_mlme_assoc() has grown far too many arguments,
make the caller build almost all of the driver struct
and pass that to the function instead.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-03-06 16:35:49 +01:00
Johannes Berg
dd5ecfeac8 mac80211: support VHT capability overrides
Support the cfg80211 API to override VHT capabilities
on association.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-03-06 16:35:48 +01:00
Johannes Berg
ee2aca343c cfg80211: add ability to override VHT capabilities
For testing it's sometimes useful to be able to
override certain VHT capability advertisement,
add the ability to do that in cfg80211.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-03-06 16:35:47 +01:00
Johannes Berg
c8bb93f5f5 wireless: remove unused VHT MCS defines
There's an enum with the same values (but slightly
different names except for NOT_SUPPORTED) that is
actually used, so remove the defines.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-03-06 16:35:47 +01:00
Johannes Berg
947add36ca cfg80211: move exported event functions into nl80211
This is the sort of thing gcc's LTO could do, but since
we don't have that yet we can also do it manually. The
advantage is reduced code, both source and binary, e.g.
on x86-64

   text	   data	    bss	    dec	    hex	filename
 442825	  56230	    776	 499831	  7a077	cfg80211.ko (before)
 441585	  56230	    776	 498591	  79b9f	cfg80211.ko (after)

a reduction of ~1k.

But in order to not complicate the code move only those
functions that are simple wrappers, not those that have
functionality of their own.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-03-06 16:35:46 +01:00
Johannes Berg
fe1abafd94 nl80211: re-add channel width and extended capa advertising
Add back the channel width and extended capability data
to wiphy information if split information is supported.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-03-06 16:35:45 +01:00
Felix Fietkau
b8a31c9a5a ieee80211: mark 802.11 related structs as being 2-byte aligned
Regardless of what header features they use, or if they align the IP
header or not, 802.11 packets from all drivers guarantee a 2-byte
alignment (and there's a debug WARN_ON in case they don't).

Annotate packet structs with __aligned(2) to allow the compiler to use
16-bit load/store operations on platforms with extremely inefficient
unaligned access (e.g. MIPS).

This reduces code size and improves performance on affected platforms
and causes no binary code change on others.

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-03-06 16:35:45 +01:00
Johannes Berg
9a886586c8 wireless: move sequence number arithmetic to ieee80211.h
Move the sequence number arithmetic code from mac80211 to
ieee80211.h so others can use it. Also rename the functions
from _seq to _sn, they operate on the sequence number, not
the sequence_control field.

Also move macros to convert the sequence control to/from
the sequence number value from various drivers.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-03-06 16:35:44 +01:00
Johannes Berg
b56cf72083 nl80211: conditionally add back TCP WoWLAN information
Add back the previously removed TCP WoWLAN information,
but only if userspace is prepared to deal with large
wiphy capability data dumps.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-03-06 16:35:43 +01:00
Johannes Berg
cdc89b97bf nl80211: conditionally add back radar information
If userspace is updated to deal with large split wiphy
information dumps, add back the radar information that
could otherwise push the data over the limit of the
netlink dump messages.

Cc: Simon Wunderlich <simon.wunderlich@s2003.tu-chemnitz.de>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-03-06 16:35:43 +01:00
Johannes Berg
3713b4e364 nl80211: allow splitting wiphy information in dumps
The per-wiphy information is getting large, to the point
where with more than the typical number of channels it's
too large and overflows, and userspace can't get any of
the information at all.

To address this (in a way that doesn't require making all
messages bigger) allow userspace to specify that it can
deal with wiphy information split across multiple parts
of the dump, and if it can split up the data. This also
splits up each channel separately so an arbitrary number
of channels can be supported.

Additionally, since GET_WIPHY has the same problem, add
support for filtering the wiphy dump and get information
for a single wiphy only, this allows userspace apps to
use dump in this case to retrieve all data from a single
device.

As userspace needs to know if all this this is supported,
add a global nl80211 feature set and include a bit for
this behaviour in it.

Cc: Dennis H Jensen <dennis.h.jensen@siemens.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-03-06 16:35:42 +01:00
Johannes Berg
191922cd4b mac80211: clarify alignment comment
The comment says something about __skb_push(), but that
isn't even called in the code any more. Looking at the
git history, that comment never even made sense when it
was still called, so just replace that part to note it
still works even when align isn't 0 or 2.

Reported-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-03-06 16:35:41 +01:00
Sachin Kamat
9fed3096d7 net: rfkill: Fix sparse warning in rfkill-regulator.c
'rfkill_regulator_ops' is used only in this file. Hence make it static.
Silences the following warning:
net/rfkill/rfkill-regulator.c:54:19: warning:
symbol 'rfkill_regulator_ops' was not declared. Should it be static?

Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-03-06 16:35:41 +01:00
Johannes Berg
77ee7c891a cfg80211: comprehensively check station changes
The station change API isn't being checked properly before
drivers are called, and as a result it is difficult to see
what should be allowed and what not.

In order to comprehensively check the API parameters parse
everything first, and then have the driver call a function
(cfg80211_check_station_change()) with the additionally
information about the kind of station that is being changed;
this allows the function to make better decisions than the
old code could.

While at it, also add a few checks, particularly in mesh
and clarify the TDLS station lifetime in documentation.

To be able to reduce a few checks, ignore any flag set bits
when the mask isn't set, they shouldn't be applied then.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-03-06 16:35:40 +01:00
Johannes Berg
ff276691e9 cfg80211: unify station WME parsing
Instead of copying the code, create a new function
to parse the station's WME information.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-03-06 16:35:39 +01:00
Johannes Berg
984c311b09 cfg80211: clean up station WME attribute parsing
Parse the attributes first, and then disable the apply
flag if needed.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-03-06 16:35:39 +01:00
Johannes Berg
2c1aabf33d cfg80211: constify station parameter pointers
All the pointers point right into the skb data and
not to anything that would be useful to change, so
make them const.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-03-06 16:35:38 +01:00
Johannes Berg
f8bacc2104 cfg80211: clean up mesh plink station change API
Make the ability to leave the plink_state unchanged not use a
magic -1 variable that isn't in the enum, but an explicit change
flag; reject invalid plink states or actions and move the needed
constants for plink actions to the right header file. Also
reject plink_state changes for non-mesh interfaces.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-03-06 16:35:37 +01:00
Johannes Berg
c0f3a317f2 Merge remote-tracking branch 'mac80211/master' into HEAD
There are a few things that would otherwise conflict.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-03-06 16:33:12 +01:00
John W. Linville
32cdd592b7 Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless into for-davem 2013-03-06 10:21:17 -05:00
J. Bruce Fields
3c34ae11fa nfsd: fix krb5 handling of anonymous principals
krb5 mounts started failing as of
683428fae8 "sunrpc: Update svcgss xdr
handle to rpsec_contect cache".

The problem is that mounts are usually done with some host principal
which isn't normally mapped to any user, in which case svcgssd passes
down uid -1, which the kernel is then expected to map to the
export-specific anonymous uid or gid.

The new uid_valid/gid_valid checks were therefore causing that downcall
to fail.

(Note the regression may not have been seen with older userspace that
tended to map unknown principals to an anonymous id on their own rather
than leaving it to the kernel.)

Reviewed-by: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2013-03-06 10:11:08 -05:00
Konrad Rzeszutek Wilk
c705c78c0d acpi: Export the acpi_processor_get_performance_info
The git commit d5aaffa9dd
(cpufreq: handle cpufreq being disabled for all exported function)
tightens the cpufreq API by returning errors when disable_cpufreq()
had been called.

The problem we are hitting is that the module xen-acpi-processor which
uses the ACPI's functions: acpi_processor_register_performance,
acpi_processor_preregister_performance, and acpi_processor_notify_smm
fails at acpi_processor_register_performance with -22.

Note that earlier during bootup in arch/x86/xen/setup.c there is also
an call to cpufreq's API: disable_cpufreq().

This is b/c we want the Linux kernel to parse the ACPI data, but leave
the cpufreq decisions to the hypervisor.

In v3.9 all the checks that d5aaffa9dd
added are now hit and the calls to cpufreq_register_notifier will now
fail. This means that acpi_processor_ppc_init ends up printing:

"Warning: Processor Platform Limit not supported"

and the acpi_processor_ppc_status is not set.

The repercussions of that is that the call to
acpi_processor_register_performance fails right away at:

	if (!(acpi_processor_ppc_status & PPC_REGISTERED))

and we don't progress any further on parsing and extracting the _P*
objects.

The only reason the Xen code called that function was b/c it was
exported and the only way to gather the P-states. But we can also
just make acpi_processor_get_performance_info be exported and not
use acpi_processor_register_performance. This patch does so.

Acked-by: Rafael J. Wysocki <rjw@sisk.pl>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2013-03-06 10:00:34 -05:00
Konrad Rzeszutek Wilk
bdc5c1812c xen/pciback: Don't disable a PCI device that is already disabled.
While shuting down a HVM guest with pci devices passed through we
get this:

pciback 0000:04:00.0: restoring config space at offset 0x4 (was 0x100000, writing 0x100002)
------------[ cut here ]------------
WARNING: at drivers/pci/pci.c:1397 pci_disable_device+0x88/0xa0()
Hardware name: MS-7640
Device pciback
disabling already-disabled device
Modules linked in:
Pid: 53, comm: xenwatch Not tainted 3.9.0-rc1-20130304a+ #1
Call Trace:
 [<ffffffff8106994a>] warn_slowpath_common+0x7a/0xc0
 [<ffffffff81069a31>] warn_slowpath_fmt+0x41/0x50
 [<ffffffff813cf288>] pci_disable_device+0x88/0xa0
 [<ffffffff814554a7>] xen_pcibk_reset_device+0x37/0xd0
 [<ffffffff81454b6f>] ? pcistub_put_pci_dev+0x6f/0x120
 [<ffffffff81454b8d>] pcistub_put_pci_dev+0x8d/0x120
 [<ffffffff814582a9>] __xen_pcibk_release_devices+0x59/0xa0

This fixes the bug.

CC: stable@vger.kernel.org
Reported-and-Tested-by: Sander Eikelenboom <linux@eikelenboom.it>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2013-03-06 10:00:25 -05:00
Matt Fleming
feff5dc4f9 efivarfs: return accurate error code in efivarfs_fill_super()
Joseph was hitting a failure case when mounting efivarfs which
resulted in an incorrect error message,

  $ sudo mount -v /sys/firmware/efi/efivars mount: Cannot allocate memory

triggered when efivarfs_valid_name() returned -EINVAL.

Make sure we pass accurate return values up the stack if
efivarfs_fill_super() fails to build inodes for EFI variables.

Reported-by: Joseph Yasi <joe.yasi@gmail.com>
Reported-by: Lingzhu Xiang <lxiang@redhat.com>
Cc: Josh Boyer <jwboyer@redhat.com>
Cc: Jeremy Kerr <jk@ozlabs.org>
Cc: Matthew Garrett <mjg59@srcf.ucam.org>
Cc: <stable@vger.kernel.org> # v3.8
Signed-off-by: Matt Fleming <matt.fleming@intel.com>
2013-03-06 14:46:30 +00:00
Matt Fleming
123abd76ed efivars: efivarfs_valid_name() should handle pstore syntax
Stricter validation was introduced with commit da27a24383
("efivarfs: guid part of filenames are case-insensitive") and commit
47f531e8ba ("efivarfs: Validate filenames much more aggressively"),
which is necessary for the guid portion of efivarfs filenames, but we
don't need to be so strict with the first part, the variable name. The
UEFI specification doesn't impose any constraints on variable names
other than they be a NULL-terminated string.

The above commits caused a regression that resulted in users seeing
the following message,

  $ sudo mount -v /sys/firmware/efi/efivars mount: Cannot allocate memory

whenever pstore EFI variables were present in the variable store,
since their variable names failed to pass the following check,

    /* GUID should be right after the first '-' */
    if (s - 1 != strchr(str, '-'))

as a typical pstore filename is of the form, dump-type0-10-1-<guid>.
The fix is trivial since the guid portion of the filename is GUID_LEN
bytes, we can use (len - GUID_LEN) to ensure the '-' character is
where we expect it to be.

(The bogus ENOMEM error value will be fixed in a separate patch.)

Reported-by: Joseph Yasi <joe.yasi@gmail.com>
Tested-by: Joseph Yasi <joe.yasi@gmail.com>
Reported-by: Lingzhu Xiang <lxiang@redhat.com>
Cc: Josh Boyer <jwboyer@redhat.com>
Cc: Jeremy Kerr <jk@ozlabs.org>
Cc: Matthew Garrett <mjg59@srcf.ucam.org>
Cc: <stable@vger.kernel.org> # v3.8
Signed-off-by: Matt Fleming <matt.fleming@intel.com>
2013-03-06 14:46:04 +00:00
Matthew Garrett
68d929862e efi: be more paranoid about available space when creating variables
UEFI variables are typically stored in flash. For various reasons, avaiable
space is typically not reclaimed immediately upon the deletion of a
variable - instead, the system will garbage collect during initialisation
after a reboot.

Some systems appear to handle this garbage collection extremely poorly,
failing if more than 50% of the system flash is in use. This can result in
the machine refusing to boot. The safest thing to do for the moment is to
forbid writes if they'd end up using more than half of the storage space.
We can make this more finegrained later if we come up with a method for
identifying the broken machines.

Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
Cc: Josh Boyer <jwboyer@redhat.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Matt Fleming <matt.fleming@intel.com>
2013-03-06 14:43:29 +00:00
Jesse Barnes
56c2912afc drm/i915: don't init LVDS on VLV
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-03-06 15:26:20 +01:00
Li Zefan
877c685607 perf: Remove include of cgroup.h from perf_event.h
Move struct perf_cgroup_info and perf_cgroup to
kernel/perf/core.c, and then we can remove include of cgroup.h.

Signed-off-by: Li Zefan <lizefan@huawei.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tejun Heo <tj@kernel.org>
Link: http://lkml.kernel.org/r/513568A0.6020804@huawei.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2013-03-06 11:32:56 +01:00
Li Zefan
27b4b9319a sched: Remove double declaration of root_task_group
It's already declared in include/linux/sched.h

Signed-off-by: Li Zefan <lizefan@huawei.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/5135A7D8.7000107@huawei.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2013-03-06 11:24:35 +01:00
Li Zefan
25cc7da7e6 sched: Move group scheduling functions out of include/linux/sched.h
- Make sched_group_{set_,}runtime(), sched_group_{set_,}period()
and sched_rt_can_attach() static.

- Move sched_{create,destroy,online,offline}_group() to
kernel/sched/sched.h.

- Remove declaration of sched_group_shares().

Signed-off-by: Li Zefan <lizefan@huawei.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/5135A7C5.3000708@huawei.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2013-03-06 11:24:34 +01:00
Li Zefan
15f803c94b sched: Make default_scale_freq_power() static
As default_scale_{freq,smt}_power() and update_rt_power() are
used in kernel/sched/fair.c only, annotate them as static
functions.

Signed-off-by: Li Zefan <lizefan@huawei.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/5135A7AF.8010900@huawei.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2013-03-06 11:24:34 +01:00
Li Zefan
c82ba9fa75 sched: Move struct sched_class to kernel/sched/sched.h
It's used internally only.

Signed-off-by: Li Zefan <lizefan@huawei.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/5135A79F.8090502@huawei.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2013-03-06 11:24:33 +01:00