Commit graph

506,942 commits

Author SHA1 Message Date
Mugunthan V N
3b72c2fe0c drivers: net:ethernet: cpsw: add support for VLAN
adding support for VLAN interface for cpsw.

CPSW VLAN Capability
* Can filter VLAN packets in Hardware

Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-02-06 15:46:40 -05:00
Mugunthan V N
e11b220f33 drivers: net: cpsw: Add helper functions for VLAN ALE implementation
Add helper functions for VLAN ALE implementations for Add, Delete
Dump VLAN related ALE entries

Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-02-06 15:46:40 -05:00
Neil Horman
ca99ca14c9 netpoll: protect napi_poll and poll_controller during dev_[open|close]
Ivan Vercera was recently backporting commit
9c13cb8bb4 to a RHEL kernel, and I noticed that,
while this patch protects the tg3 driver from having its ndo_poll_controller
routine called during device initalization, it does nothing for the driver
during shutdown. I.e. it would be entirely possible to have the
ndo_poll_controller method (or subsequently the ndo_poll) routine called for a
driver in the netpoll path on CPU A while in parallel on CPU B, the ndo_close or
ndo_open routine could be called.  Given that the two latter routines tend to
initizlize and free many data structures that the former two rely on, the result
can easily be data corruption or various other crashes.  Furthermore, it seems
that this is potentially a problem with all net drivers that support netpoll,
and so this should ideally be fixed in a common path.

As Ben H Pointed out to me, we can't preform dev_open/dev_close in atomic
context, so I've come up with this solution.  We can use a mutex to sleep in
open/close paths and just do a mutex_trylock in the napi poll path and abandon
the poll attempt if we're locked, as we'll just retry the poll on the next send
anyway.

I've tested this here by flooding netconsole with messages on a system whos nic
driver I modfied to periodically return NETDEV_TX_BUSY, so that the netpoll tx
workqueue would be forced to send frames and poll the device.  While this was
going on I rapidly ifdown/up'ed the interface and watched for any problems.
I've not found any.

Signed-off-by: Neil Horman <nhorman@tuxdriver.com>
CC: Ivan Vecera <ivecera@redhat.com>
CC: "David S. Miller" <davem@davemloft.net>
CC: Ben Hutchings <bhutchings@solarflare.com>
CC: Francois Romieu <romieu@fr.zoreil.com>
CC: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-02-06 15:45:03 -05:00
Alexander Aring
f458c647ea wpan: whitespace fix
Signed-off-by: Alexander Aring <alex.aring@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-02-06 15:44:02 -05:00
Michał Mirosław
9f3b795a62 driver-core: constify data for class_find_device()
All in-kernel users of class_find_device() don't really need mutable
data for match callback.

In two places (kernel/power/suspend_test.c, drivers/scsi/osd/osd_uld.c)
this patch changes match callbacks to use const search data.

The const is propagated to rtc_class_open() and power_supply_get_by_name()
parameters.

Note that there's a dev reference leak in suspend_test.c that's not
touched in this patch.

Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl>
Acked-by: Grant Likely <grant.likely@secretlab.ca>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-02-06 12:18:56 -08:00
Steffen Klassert
f4e53e292a ipv6: Don't send packet to big messages to self
Calling icmpv6_send() on a local message size error leads to an
incorrect update of the path mtu in the case when IPsec is used.
So use ipv6_local_error() instead to notify the socket about the
error.

Reported-by: Jiri Bohac <jbohac@suse.cz>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-02-06 15:12:39 -05:00
Joe Perches
efc496eb31 drivers: net: misc: Remove unused OOM variables
commits 9d11bd159
("wimax: Remove unnecessary alloc/OOM messages, alloc cleanups")
and b2adaca92
("ethernet: Remove unnecessary alloc/OOM messages, alloc cleanups")
added a couple of unused variable warnings.

Remove the now unused variables.

Noticed-by: kbuild test robot <fengguang.wu@intel.com>
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-02-06 14:58:52 -05:00
Joe Perches
62b5942aa5 net: core: Remove unnecessary alloc/OOM messages
alloc failures already get standardized OOM
messages and a dump_stack.

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-02-06 14:58:52 -05:00
David S. Miller
b6ec447df9 Merge branch 'wireless'
John W. Linville says:

====================
Please consider this pull request for the 3.8 stream...

Included is a bluetooth pull.  Gustavo says:

"Two simple fixes for 3.8. One of the patches fixes a situation
where the connection wasn't terminated if a timeout ocurrs for LE
an SCO connections.  The other fixes prevent NULL dereference in the
SMP code, it is a security fix as well."

Along with those...

Hauke Mehrtens provides a couple of ssb and bcma bus fixes that
prevent oopses when unloading those modules.

Larry Finger provides and rtlwifi fix to avoid a "scheduling while
atomic" bug.

Last but certainly not least, Arend van Spriel bring a brcmsmac fix that
reworks the mac80211 .flush() callback in order to avoid the dreaded
brcms_c_wait_for_tx_completion warnings.  This one looks a little
large, but I think it is safe and isolated to brcmsmac in any case.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2013-02-06 14:51:14 -05:00
Felipe Balbi
9662ced352 usb: gadget: imx_udc: make it depend on BROKEN
that driver hasn't been maintained for quite
some time, at least since e08300043e (ARM:
imx: dynamically allocate imx_udc device).

Because of that, and because driver doesn't
even compile with allyesconfig and allmodconfig,
we're making it depend on BROKEN.

Reported-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Felipe Balbi <balbi@ti.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-02-06 11:43:39 -08:00
Felipe Balbi
c8ce60bbed usb: omap_control_usb: fix compile warning
When CONFIG_OMAP_CONTROL_USB isn't enabled,
there's a compile warning stating that a
particular function isn't a prototype.

Fix it.

Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-02-06 11:40:14 -08:00
Kishon Vijay Abraham I
51482be9dc ARM: OMAP: USB: Add phy binding information
This is w.r.t the changes in PHY library to support adding and getting
multiple PHYs of the same type. In the new design, the
binding information between the PHY and the USB controller should be
specified in the platform specific initialization code. So it's been
done here for OMAP platforms.

Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-02-06 11:40:14 -08:00
Kishon Vijay Abraham I
fa1dfe4abe ARM: OMAP2: MUSB: Specify omap4 has mailbox
Added has_mailbox to the musb platform data to specify that omap uses
an external mailbox (in control module) to communicate with the musb
core during device connect and disconnect.

Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-02-06 11:40:13 -08:00
Kishon Vijay Abraham I
36273356b2 ARM: OMAP: devices: create device for usb part of control module
A seperate driver has been added to handle the usb part of control
module. A device for the above driver is created here, using the register
address information to be used by the driver for powering on the PHY and
for writing to the mailbox.

Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-02-06 11:40:13 -08:00
Kishon Vijay Abraham I
5b9479e9f1 ARM: OMAP4: remove control module address space from PHY and OTG
Now that we have a separate driver for the control module,
stop populating the control module device data in other modules
(PHY and OTG) device info.

Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-02-06 11:39:58 -08:00
Dan Carpenter
f07af4b630 USB: wusbcore/wa-xfer: error handling fixes in setup_segs()
1) It didn't free xfer->seg[0] so there was a leak.
2) xfer->seg[cnt] can be NULL.
3) Use usb_free_urb() for ->dto_urb instead of kfree().

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-02-06 11:38:14 -08:00
Chen Gang
4d2079c190 drivers/usb/gadget: using strlcpy instead of strncpy
for NUL terminated string, better notice '\0' in the end.

Signed-off-by: Chen Gang <gang.chen@asianux.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-02-06 11:38:13 -08:00
Chen Gang
b11b2e1bdd drivers/usb/core: using strlcpy instead of strncpy
for NUL terminated string, better notice '\0' in the end.

Signed-off-by: Chen Gang <gang.chen@asianux.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-02-06 11:38:13 -08:00
Tomas Winkler
074b4c01ab mei: move clients cleanup code from init.c to client.c
during reset we clean up client data structures
we move that code into wrappers in client
and call the wrappers

Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-02-06 11:24:33 -08:00
Tomas Winkler
330dd7da5e mei: rename to mei_host_buffer_is_empty to hbuf_is_ready
we rename the mei_host_buffer_is_empty to keep naming
convention of hbuf and also make the query more generic
to be correct also for other under laying hardware

Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-02-06 11:24:33 -08:00
Tomas Winkler
06ecd64598 mei: move interrupt handlers to be me hw specific
interrupt handler are  platform specifics so we move
them to hw-mei.c. For sake of that we need to export
write, read, and complete handlers from the interrupt.c

Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-02-06 11:24:33 -08:00
Guenter Roeck
5aa57f0a65 iio: Update iio_channel_get API to use consumer device pointer as argument
For iio_channel_get to work with OF based configurations, it needs the
consumer device pointer instead of the consumer device name as argument.

Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Acked-by: Anton Vorontsov <anton@enomsg.org>
Acked-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2013-02-06 19:23:52 +00:00
Tomas Winkler
827eef51f8 mei: separate compilation of the ME hardware specifics
We add struct mei_hw_ops to virtualize access to hw specific
configurations. This allows us to separate the compilation
of the ME interface from the ME hardware specifics

Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-02-06 11:23:47 -08:00
Tomas Winkler
52c3456141 mei: initial extract of ME hw specifics from mei_device
This is initial step of move the ME hw specifics
out of mei_device structure into mei_me_hw

Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-02-06 11:23:14 -08:00
Tomas Winkler
2703d4b2e6 mei: sperate interface and pci code into two files
leave misc file operations in the main
and move PCI related code into pci-me

Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-02-06 11:21:51 -08:00
Hans Grob
890537b3ac drivers/char/mem.c: fix small coding style issues
This patch fixes four foo * bar errors, and one trailing whitespace
complaint from checkpatch.pl

Signed-off-by: Hans Grob <H.Grob@physik.uni-muenchen.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-02-06 11:21:51 -08:00
Joe Millenbach
238d9f6e55 input: drop unnecessary dependencies on TTY
Backing out changes made in earlier TTY removal patch.  Switched
to only one dependency in SERPORT on TTY instead of many incorrect
dependencies.

Signed-off-by: Joe Millenbach <jmillenbach@gmail.com>
Reported-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-02-06 11:10:49 -08:00
James Hogan
a8cd98586b tty: metag_da: avoid getting tty kref in dashtty_timer()
Getting the tty kref in dashtty_timer() is no longer necessary since it
isn't needed in fetch_data() any longer (due to changes which make the
tty flip functions refer to tty_ports instead of tty_structs), so just
pass around a channel number instead.

Signed-off-by: James Hogan <james.hogan@imgtec.com>
Acked-by: Jiri Slaby <jslaby@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-02-06 11:10:17 -08:00
James Hogan
8200e38a0c tty: metag_da: Add metag DA TTY driver
Add a TTY driver for communicating over a Meta DA (Debug Adapter)
channel using the bios channel SWITCH operation.

Signed-off-by: James Hogan <james.hogan@imgtec.com>
Cc: Jiri Slaby <jslaby@suse.cz>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-02-06 11:10:17 -08:00
Stephen Rothwell
26f7936c33 sparc: explicitly include sched.h to get task_thread_info declaration
This was caused by commit 16559ae48c ("kgdb: remove #include
<linux/serial_8250.h> from kgdb.h") from the tty tree.

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-02-06 11:04:10 -08:00
John W. Linville
b3b66ae4c8 Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless into for-davem 2013-02-06 13:55:44 -05:00
Jacob Shin
0fbdad078a perf/x86: Allow for architecture specific RDPMC indexes
Similar to config_base and event_base, allow architecture
specific RDPMC ECX values.

Signed-off-by: Jacob Shin <jacob.shin@amd.com>
Acked-by: Stephane Eranian <eranian@google.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1360171589-6381-6-git-send-email-jacob.shin@amd.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2013-02-06 19:45:24 +01:00
Jacob Shin
4c1fd17a1c perf/x86: Move MSR address offset calculation to architecture specific files
Move counter index to MSR address offset calculation to
architecture specific files. This prepares the way for
perf_event_amd to enable counter addresses that are not
contiguous -- for example AMD Family 15h processors have 6 core
performance counters starting at 0xc0010200 and 4 northbridge
performance counters starting at 0xc0010240.

Signed-off-by: Jacob Shin <jacob.shin@amd.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
Cc: Stephane Eranian <eranian@google.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1360171589-6381-5-git-send-email-jacob.shin@amd.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2013-02-06 19:45:24 +01:00
Jacob Shin
9f19010af8 perf/x86/amd: Use proper naming scheme for AMD bit field definitions
Update these AMD bit field names to be consistent with naming
convention followed by the rest of the file.

Signed-off-by: Jacob Shin <jacob.shin@amd.com>
Acked-by: Stephane Eranian <eranian@google.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1360171589-6381-4-git-send-email-jacob.shin@amd.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2013-02-06 19:45:23 +01:00
Robert Richter
4dd4c2ae55 perf/x86/amd: Generalize northbridge constraints code for family 15h
Generalize northbridge constraints code for family 10h so that
later we can reuse the same code path with other AMD processor
families that have the same northbridge event constraints.

Signed-off-by: Robert Richter <rric@kernel.org>
Signed-off-by: Jacob Shin <jacob.shin@amd.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
Cc: Stephane Eranian <eranian@google.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1360171589-6381-3-git-send-email-jacob.shin@amd.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2013-02-06 19:45:23 +01:00
Robert Richter
2c53c3dd0b perf/x86/amd: Rework northbridge event constraints handler
Code simplification. No functional changes.

Signed-off-by: Robert Richter <rric@kernel.org>
Signed-off-by: Jacob Shin <jacob.shin@amd.com>
Acked-by: Stephane Eranian <eranian@google.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Robert Richter <rric@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1360171589-6381-2-git-send-email-jacob.shin@amd.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2013-02-06 19:45:22 +01:00
Peter Meerwald
860c9c5427 iio: tweak language in industrialio-trigger comments
Signed-off-by: Peter Meerwald <pmeerw@pmeerw.net>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2013-02-06 18:40:05 +00:00
Guenter Roeck
a405b00e44 iio/adc: (max1363) Add support for external reference voltage
Implement external reference voltage as regulator named "vref".

Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2013-02-06 18:38:40 +00:00
Guenter Roeck
7c3e8675f3 iio: max1363: Use devm_ functions whereever possible to allocate resources
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2013-02-06 18:38:40 +00:00
Joonsoo Kim
b1e0541674 mm/sl[au]b: correct allocation type check in kmalloc_slab()
commit "slab: Common Kmalloc cache determination" made mistake
in kmalloc_slab(). SLAB_CACHE_DMA is for kmem_cache creation,
not for allocation. For allocation, we should use GFP_XXX to identify
type of allocation. So, change SLAB_CACHE_DMA to GFP_DMA.

Acked-by: Christoph Lameter <cl@linux.com>
Reported-by: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: Joonsoo Kim <js1304@gmail.com>
Signed-off-by: Pekka Enberg <penberg@kernel.org>
2013-02-06 20:37:55 +02:00
Christoph Lameter
db84506734 slab: Fixup CONFIG_PAGE_ALLOC/DEBUG_SLAB_LEAK sections
Variables were not properly converted and the conversion caused
a naming conflict.

Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Signed-off-by: Christoph Lameter <cl@linux.com>
Signed-off-by: Pekka Enberg <penberg@kernel.org>
2013-02-06 20:36:14 +02:00
Christoph Lameter
c601fd6956 slab: Handle ARCH_DMA_MINALIGN correctly
James Hogan hit boot problems in next-20130204 on Meta:

  META213-Thread0 DSP [LogF] kobject (4fc03980): tried to init an initialized object, something is seriously wrong.
  META213-Thread0 DSP [LogF]
  META213-Thread0 DSP [LogF] Call trace:
  META213-Thread0 DSP [LogF] [<4000888c>] _show_stack+0x68/0x7c
  META213-Thread0 DSP [LogF] [<400088b4>] _dump_stack+0x14/0x28
  META213-Thread0 DSP [LogF] [<40103794>] _kobject_init+0x58/0x9c
  META213-Thread0 DSP [LogF] [<40103810>] _kobject_create+0x38/0x64
  META213-Thread0 DSP [LogF] [<40103eac>] _kobject_create_and_add+0x14/0x8c
  META213-Thread0 DSP [LogF] [<40190ac4>] _mnt_init+0xd8/0x220
  META213-Thread0 DSP [LogF] [<40190508>] _vfs_caches_init+0xb0/0x160
  META213-Thread0 DSP [LogF] [<401851f4>] _start_kernel+0x274/0x340
  META213-Thread0 DSP [LogF] [<40188424>] _metag_start_kernel+0x58/0x6c
  META213-Thread0 DSP [LogF] [<40000044>] __start+0x44/0x48
  META213-Thread0 DSP [LogF]
  META213-Thread0 DSP [LogF] devtmpfs: initialized
  META213-Thread0 DSP [LogF] L2 Cache: Not present
  META213-Thread0 DSP [LogF] BUG: failure at fs/sysfs/dir.c:736/sysfs_read_ns_type()!
  META213-Thread0 DSP [LogF] Kernel panic - not syncing: BUG!
  META213-Thread0 DSP [Thread Exit] Thread has exited - return code = 4294967295

And bisected the problem to commit 95a05b4 ("slab: Common constants for
kmalloc boundaries").

As it turns out, a fixed KMALLOC_SHIFT_LOW does not work for arches with
higher alignment requirements.

Determine KMALLOC_SHIFT_LOW from ARCH_DMA_MINALIGN instead.

Reported-and-tested-by: James Hogan <james.hogan@imgtec.com>
Signed-off-by: Christoph Lameter <cl@linux.com>
Signed-off-by: Pekka Enberg <penberg@kernel.org>
2013-02-06 20:32:13 +02:00
Guenter Roeck
d476828037 hwmon: (jc42) Add support for MCP98244
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Jean Delvare <khali@linux-fr.org>
2013-02-06 09:58:07 -08:00
Guenter Roeck
f880b12c18 hwmon: (pmbus) Clean up for code size reduction
Rearranged some data structures, and merged some common functions.
Overall code and data size reduction by more than 900 bytes.

Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2013-02-06 09:58:07 -08:00
Guenter Roeck
50115ac9b6 hwmon: (pmbus/max34440) Add support for MAX34460 and MAX34461
MAX34460 is a PMBus 12-Channel Voltage Monitor & Sequencer.
MAX34461 is a PMBus 16-Channel Voltage Monitor & Sequencer.

Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2013-02-06 09:58:06 -08:00
Guenter Roeck
16c6d01f3b hwmon: (pmbus) Add support for word status register
Not all PMBus devices support the byte status register at 0x78.
Try to use the word status register at 0x79 instead if that is the case.

Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2013-02-06 09:58:05 -08:00
Guenter Roeck
1640eaecc4 hwmon: (pmbus/zl6100) Add support for VMON/VDRV
Some of the ZL6100 compatible chips support monitoring a separate voltage pin,
VMON (ZL2004) or VDRV (ZL91xx). Report it as in2 / vmon.

The chips support implicit warning limits for VMON/VDRV, as percentage of the
respective critical voltage. Support by reading/writing the critical voltages
and calculating the associated warning voltages.

Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2013-02-06 09:58:05 -08:00
Guenter Roeck
ce603b18f3 hwmon: (pmbus) Add function to clear sensor cache
For PMBus chips, modifying one limit register may affect other limits.
Since limits are all cached in the PMBus core driver, related changes
are not reflected in reported limits.

Introduce function to clear the attribute cache. After calling this function,
the core pmbus driver re-reads all cached values.

Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2013-02-06 09:58:04 -08:00
Guenter Roeck
aebcbbfc49 hwmon: (pmbus) Add support for additional voltage sensor
Some PMBus chips support monitoring an additional non-standard voltage. While
this voltage can in many cases be supported by simulating an additional sensor
page, this does not work in all cases. Specifically, it is problematic if the
data format is linear and the voltage is reported in LINEAR11 format. Since
output voltages use LINEAR16, and the exponent for LINEAR16 data is chip-wide
and fixed, this can result in overflows.

To solve this problem, add support for an additional virtual input voltage,
call it 'vmon', and treat this voltage as input voltage (which, when the chip
supports linear data format, uses LINEAR11).

Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2013-02-06 09:58:03 -08:00
Guenter Roeck
85cfb3a835 hwmon: (pmbus) Use krealloc to allocate attribute memory
So far, attribute memory was allocated by pre-calculating the maximum possible
amount of attributes. Not only does this waste memory, it is also risky because
the calculation might be wrong. It also requires a lot of defines to specify
the maximum number of attributes per class.

Allocate attribute memory using krealloc() instead. That means we have to use
kfree(), since devm_krealloc() does not exist, but that is still less costly
and less risky than trying to predict the number of attributes at the beginning.

Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2013-02-06 09:58:03 -08:00