This patch introduces a new default FIQ handler that is structured in a
similar way to the existing ARM exception handler and result in the FIQ
being handled by C code running on the SVC stack (despite this code run
in the FIQ handler is subject to severe limitations with respect to
locking making normal interaction with the kernel impossible).
This default handler allows concepts that on x86 would be handled using
NMIs to be realized on ARM.
Credit:
This patch is a near complete re-write of a patch originally
provided by Anton Vorontsov. Today only a couple of small fragments
survive, however without Anton's work to build from this patch would
not exist. Thanks also to Russell King for spoonfeeding me a variety
of fixes during the review cycle.
Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Acked-by: Nicolas Pitre <nico@linaro.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Not all filesystems now provide the rename i_op - ext4 for one - but rather
provide the rename2 i_op. CacheFiles checks that the filesystem has rename
and so will reject ext4 now with EPERM:
CacheFiles: Failed to register: -1
Fix this by checking for rename2 as an alternative. The call to vfs_rename()
actually handles selection of the appropriate function, so we needn't worry
about that.
Turning on debugging shows:
[cachef] ==> cachefiles_get_directory(,,cache)
[cachef] subdir -> ffff88000b22b778 positive
[cachef] <== cachefiles_get_directory() = -1 [check]
where -1 is EPERM.
Signed-off-by: David Howells <dhowells@redhat.com>
These two have been unused since
commit c4d6d8dbf3
CacheFiles: Fix the marking of cached pages
in 3.8.
Signed-off-by: NeilBrown <neilb@suse.de>
Signed-off-by: David Howells <dhowells@redhat.com>
This patch adds i2c pinctrl DT node for IFC6410 board. It also adds
necessary DT support for i2c eeprom which is present on IFC6410.
Signed-off-by: Kiran Padwal <kiran.padwal@smartplayin.com>
Signed-off-by: Kumar Gala <galak@codeaurora.org>
This patch adds sdcc4 node to enable wlan support on IFC6410
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Kumar Gala <galak@codeaurora.org>
Add support for i2c controller on the DB8074 board. It also adds necessary
DT support for i2c eeprom which is present on DB8074 board.
Signed-off-by: Kiran Padwal <kiran.padwal@smartplayin.com>
Signed-off-by: Kumar Gala <galak@codeaurora.org>
Clearly a right-shift was meant. Effectively doesn't make a difference,
as add_len is hard-coded to 8 and the high byte will be zero no matter
which way you shift. But I hate leaving bad examples for others to
copy.
Found by coverity.
Signed-off-by: Joern Engel <joern@logfs.org>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
This patch correctly handles match_int() errors in FILEIO + PSCSI
backend parameter parsing, which can potentially fail due to a
memory allocation failure or invalid argument.
Found by coverity.
Signed-off-by: Joern Engel <joern@logfs.org>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
Old code in iscsi_parse_pr_out_transport_id() was obviously buggy
and effectively ignored the high byte.
Found by coverity.
Signed-off-by: Joern Engel <joern@logfs.org>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
Coverity complained that lun_cg has been dereferenced in all paths
leading to NULL check. It didn't mention that only a single path could
lead there and the code can be simplified even further.
Signed-off-by: Joern Engel <joern@logfs.org>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
This patch fixes a memory leak on error in target_fabric_make_mappedlun(),
where se_lun_acl memory does not get released on exit.
Found by coverity.
Signed-off-by: Joern Engel <joern@logfs.org>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
We never grab cgroup mutex in fork and exit paths no matter whether
notify_on_release is set or not.
Signed-off-by: Zefan Li <lizefan@huawei.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
We no longer clear kn->priv in cgroup_rmdir(), so we don't need
to get an extra refcnt.
Signed-off-by: Zefan Li <lizefan@huawei.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Pull to receive a4189487da ("cgroup: delay the clearing of
cgrp->kn->priv") for the scheduled clean up patches.
Signed-off-by: Tejun Heo <tj@kernel.org>
Each case of match_strdup could leak memory if the same argument was
present before. I am not too concerned, as it would require a
non-sensical combination like "target_lun=foo target_lun=bar", done
with root privileges and even then leak just a few bytes per instance.
But arg_p is different, as it will always leak memory. Let's plug that
one. And while at it, replace some &args[0] with args.
Found by coverity.
Signed-off-by: Joern Engel <joern@logfs.org>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
All builtins that consume events from perf's ring buffer now end up
calling perf_evlist__mmap_consume(), which will allow unmapping the ring
buffer when all the fds gets closed and all events in the buffer
consumed.
This is in preparation for the patchkit that will notice POLLHUP on
perf events file descriptors.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-8vhaeeoq11ppz0713el4xcps@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Do not use dwfl_module_addrsym if dwarf_diename can find the symbol
name, since dwfl_module_addrsym can be failed on shared libraries.
Without this patch
----
$ perf probe -x ../lib/traceevent/libtraceevent.so -V create_arg_op
Failed to find symbol at 0x11df1
Failed to find the address of create_arg_op
Error: Failed to show vars.
----
With this patch
----
$ perf probe -x ../lib/traceevent/libtraceevent.so -V create_arg_op
Available variables at create_arg_op
@<create_arg_op+0>
enum filter_op_type btype
struct filter_arg* arg
----
This bug was reported on linux-perf-users@vger.kernel.org.
Reported-by: david lerner <dlernerdroid@gmail.com>
Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: david lerner <dlernerdroid@gmail.com>
Cc: linux-perf-user@vger.kernel.org
Cc: yrl.pp-manager.tt@hitachi.com
Link: http://permalink.gmane.org/gmane.linux.kernel.perf.user/1691
Link: http://lkml.kernel.org/r/20140917084101.3722.25299.stgit@kbuild-f20.novalocal
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Do not access kallsyms to show available variables and show source lines
in user binaries.
This behavior always requires the root privilege when sysctl sets
kernel.kptr_restrict=1, but we don't need it just for analyzing user
binaries.
Without this patch (by normal user, kptr_restrict=1):
----
$ perf probe -x ./perf -V add_cmdname
Failed to init vmlinux path.
Error: Failed to show vars.
$ perf probe -x ./perf -L add_cmdname
Failed to init vmlinux path.
Error: Failed to show lines.
----
With this patch:
----
$ perf probe -x ./perf -V add_cmdname
Available variables at add_cmdname
@<perf_unknown_cmd_config+144>
(No matched variables)
@<list_commands_in_dir+160>
(No matched variables)
@<add_cmdname+0>
char* name
size_t len
struct cmdnames* cmds
$ perf probe -x ./perf -L add_cmdname
<add_cmdname@/home/fedora/ksrc/linux-3/tools/perf/util/help.c:0>
0 void add_cmdname(struct cmdnames *cmds, const char *name, size_t len)
1 {
2 struct cmdname *ent = malloc(sizeof(*ent) + len + 1);
4 ent->len = len;
5 memcpy(ent->name, name, len);
6 ent->name[len] = 0;
...
----
Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: david lerner <dlernerdroid@gmail.com>
Cc: linux-perf-user@vger.kernel.org
Cc: yrl.pp-manager.tt@hitachi.com
Link: http://lkml.kernel.org/r/20140917084054.3722.73975.stgit@kbuild-f20.novalocal
[ Added missing 'bool user' argument to the !DWARF show_line_range() stub ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
There is no need to initialize the error since it is going to be assigned
with the return status of at least on of the device_create_file() call.
We can return directly in case the first file creation fails.
All the labels for goto can be removed (along with the gotos) as well.
Tell the compiler that the failures are unlikely so it can create better
binaries.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@gmail.com>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
ACPI_SUCCESS is defined as:
#define ACPI_SUCCESS(a) (!(a))
There is no need for the the double ! since there is already a macro
defined for failures: ACPI_FAILURE()
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@gmail.com>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
Fixed 22 similar coding style issues: "ERROR: spaces required around that '?'"
Signed-off-by: Jan van den Berg <janvdberg@gmail.com>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
Newer Toshiba models now come with a new (and different) keyboard
backlight implementation with three modes of operation: TIMER,
ON and OFF, and the LED is now controlled internally by the firmware.
This patch adds support for that type of backlight, changing the
existing code to accomodate the new implementation.
The timeout value range is now 1-60 seconds, and the accepted
modes are now: 1 (FN-Z), 2 (AUTO or TIMER), 8 (ON) and 10 (OFF),
this adds two new entries kbd_type and available_kbd_modes,
the first shows the keyboard type and the latter shows the
supported modes depending on the keyboard type.
Signed-off-by: Azael Avalos <coproscefalo@gmail.com>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
The function toshiba_touchpad_store is not checking
for invalid values and simply returns silently.
This patch checks for invalid values and returns accordingly.
Signed-off-by: Azael Avalos <coproscefalo@gmail.com>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
Some Toshiba models with illumination support set a different
value on the returned codes, thus not allowing the illumination
LED to be registered, where it should be.
This patch removes a check from toshiba_illumination_available
function to allow such models to register the illumination LED.
Signed-off-by: Azael Avalos <coproscefalo@gmail.com>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
Appart from reporting hotkeys, the INFO method is used
as a system wide event notifier for hardware or
software changes.
This patch adds additional "events" to the keymap list,
ignored by now, until we find them a good use.
Signed-off-by: Azael Avalos <coproscefalo@gmail.com>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
last_intr_fail_name is a fixed-size array and could theoretically
overflow. In reality intrname->value doesn't seem to depend on
untrusted input or be anywhere near 224 characters, so the overflow is
pretty theoretical. But strlcpy is cheap enough.
Found by coverity.
Signed-off-by: Joern Engel <joern@logfs.org>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
An user reported this, it is because that lseek's SEEK_SET/SEEK_CUR/SEEK_END
allow a negative value for @offset, but btrfs's SEEK_DATA/SEEK_HOLE don't
prepare for that and convert the negative @offset into unsigned type,
so we get (end < start) warning.
[ 1269.835374] ------------[ cut here ]------------
[ 1269.836809] WARNING: CPU: 0 PID: 1241 at fs/btrfs/extent_io.c:430 insert_state+0x11d/0x140()
[ 1269.838816] BTRFS: end < start 4094 18446744073709551615
[ 1269.840334] CPU: 0 PID: 1241 Comm: a.out Tainted: G W 3.16.0+ #306
[ 1269.858229] Call Trace:
[ 1269.858612] [<ffffffff81801a69>] dump_stack+0x4e/0x68
[ 1269.858952] [<ffffffff8107894c>] warn_slowpath_common+0x8c/0xc0
[ 1269.859416] [<ffffffff81078a36>] warn_slowpath_fmt+0x46/0x50
[ 1269.859929] [<ffffffff813b0fbd>] insert_state+0x11d/0x140
[ 1269.860409] [<ffffffff813b1396>] __set_extent_bit+0x3b6/0x4e0
[ 1269.860805] [<ffffffff813b21c7>] lock_extent_bits+0x87/0x200
[ 1269.861697] [<ffffffff813a5b28>] btrfs_file_llseek+0x148/0x2a0
[ 1269.862168] [<ffffffff811f201e>] SyS_lseek+0xae/0xc0
[ 1269.862620] [<ffffffff8180b212>] system_call_fastpath+0x16/0x1b
[ 1269.862970] ---[ end trace 4d33ea885832054b ]---
This assumes that btrfs starts finding DATA/HOLE from the beginning of file
if the assigned @offset is negative.
Also we add alignment for lock_extent_bits 's range.
Reported-by: Toralf Förster <toralf.foerster@gmx.de>
Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
Signed-off-by: Chris Mason <clm@fb.com>
In iscsi_copy_param_list() a failed iscsi_param_list memory allocation
currently invokes iscsi_release_param_list() to cleanup, and will promptly
trigger a NULL pointer dereference.
Instead, go ahead and return for the first iscsi_copy_param_list()
failure case.
Found by coverity.
Signed-off-by: Joern Engel <joern@logfs.org>
Cc: <stable@vger.kernel.org> # v3.1+
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
This patch fixes a bug in iscsit_logout_post_handler_diffcid() where
a pointer used as storage for list_for_each_entry() was incorrectly
being used to determine if no matching entry had been found.
This patch changes iscsit_logout_post_handler_diffcid() to key off
bool conn_found to determine if the function needs to exit early.
Reported-by: Joern Engel <joern@logfs.org>
Cc: <stable@vger.kernel.org> # v3.1+
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
This patch introduces the new variable 'ima_policy_flag', whose bits
are set depending on the action of the current policy rules. Only the
flags IMA_MEASURE, IMA_APPRAISE and IMA_AUDIT are set.
The new variable will be used to improve performance by skipping the
unnecessary execution of IMA code if the policy does not contain rules
with the above actions.
Changes in v6 (Roberto Sassu)
* do not check 'ima_initialized' before calling ima_update_policy_flag()
in ima_update_policy() (suggested by Dmitry)
* calling ima_update_policy_flag() moved to init_ima to co-locate with
ima_initialized (Dmitry)
* add/revise comments (Mimi)
Changes in v5 (Roberto Sassu)
* reset IMA_APPRAISE flag in 'ima_policy_flag' if 'ima_appraise' is set
to zero (reported by Dmitry)
* update 'ima_policy_flag' only if IMA initialization is successful
(suggested by Mimi and Dmitry)
* check 'ima_policy_flag' instead of 'ima_initialized'
(suggested by Mimi and Dmitry)
Signed-off-by: Roberto Sassu <roberto.sassu@polito.it>
Signed-off-by: Dmitry Kasatkin <d.kasatkin@samsung.com>
Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
After the data is written successfully, we should cleanup the read failure record
in that range because
- If we set data COW for the file, the range that the failure record pointed to is
mapped to a new place, so it is invalid.
- If we set no data COW for the file, and if there is no error during writting,
the corrupted data is corrected, so the failure record can be removed. And if
some errors happen on the mirrors, we also needn't worry about it because the
failure record will be recreated if we read the same place again.
Sometimes, we may fail to correct the data, so the failure records will be left
in the tree, we need free them when we free the inode or the memory leak happens.
Signed-off-by: Miao Xie <miaox@cn.fujitsu.com>
Signed-off-by: Chris Mason <clm@fb.com>
This patch implement data repair function when direct read fails.
The detail of the implementation is:
- When we find the data is not right, we try to read the data from the other
mirror.
- When the io on the mirror ends, we will insert the endio work into the
dedicated btrfs workqueue, not common read endio workqueue, because the
original endio work is still blocked in the btrfs endio workqueue, if we
insert the endio work of the io on the mirror into that workqueue, deadlock
would happen.
- After we get right data, we write it back to the corrupted mirror.
- And if the data on the new mirror is still corrupted, we will try next
mirror until we read right data or all the mirrors are traversed.
- After the above work, we set the uptodate flag according to the result.
Signed-off-by: Miao Xie <miaox@cn.fujitsu.com>
Signed-off-by: Chris Mason <clm@fb.com>
We need real mirror number for RAID0/5/6 when reading data, or if read error
happens, we would pass 0 as the number of the mirror on which the io error
happens. It is wrong and would cause the filesystem read the data from the
corrupted mirror again.
Signed-off-by: Miao Xie <miaox@cn.fujitsu.com>
Signed-off-by: Chris Mason <clm@fb.com>
We could not use clean_io_failure in the direct IO path because it got the
filesystem information from the page structure, but the page in the direct
IO bio didn't have the filesystem information in its structure. So we need
modify it and pass all the information it need by parameters.
Signed-off-by: Miao Xie <miaox@cn.fujitsu.com>
Signed-off-by: Chris Mason <clm@fb.com>
The original code of repair_io_failure was just used for buffered read,
because it got some filesystem data from page structure, it is safe for
the page in the page cache. But when we do a direct read, the pages in bio
are not in the page cache, that is there is no filesystem data in the page
structure. In order to implement direct read data repair, we need modify
repair_io_failure and pass all filesystem data it need by function
parameters.
Signed-off-by: Miao Xie <miaox@cn.fujitsu.com>
Signed-off-by: Chris Mason <clm@fb.com>
The data repair function of direct read will be implemented later, and some code
in bio_readpage_error will be reused, so split bio_readpage_error into
several functions which will be used in direct read repair later.
Signed-off-by: Miao Xie <miaox@cn.fujitsu.com>
Signed-off-by: Chris Mason <clm@fb.com>
We forgot to free failure record and bio after submitting re-read bio failed,
fix it.
Signed-off-by: Miao Xie <miaox@cn.fujitsu.com>
Signed-off-by: Chris Mason <clm@fb.com>
Direct IO splits the original bio to several sub-bios because of the limit of
raid stripe, and the filesystem will wait for all sub-bios and then run final
end io process.
But it was very hard to implement the data repair when dio read failure happens,
because at the final end io function, we didn't know which mirror the data was
read from. So in order to implement the data repair, we have to move the file data
check in the final end io function to the sub-bio end io function, in which we can
get the mirror number of the device we access. This patch did this work as the
first step of the direct io data repair implementation.
Signed-off-by: Miao Xie <miaox@cn.fujitsu.com>
Signed-off-by: Chris Mason <clm@fb.com>
The current code would load checksum data for several times when we split
a whole direct read io because of the limit of the raid stripe, it would
make us search the csum tree for several times. In fact, it just wasted time,
and made the contention of the csum tree root be more serious. This patch
improves this problem by loading the data at once.
Signed-off-by: Miao Xie <miaox@cn.fujitsu.com>
Signed-off-by: Chris Mason <clm@fb.com>
rw_devices counter is often used to tune the profile when doing chunk allocation,
so we should modify it under the chunk_mutex context to avoid getting wrong
chunk profile.
Signed-off-by: Miao Xie <miaox@cn.fujitsu.com>
Signed-off-by: Chris Mason <clm@fb.com>
For a missing device, we don't know it belong to which fs before we read its
fsid from the chunk tree. So we add them into the current fs device list at first.
When we get its fsid, we should move them to their own fs device list.
Signed-off-by: Miao Xie <miaox@cn.fujitsu.com>
Signed-off-by: Chris Mason <clm@fb.com>
When we open a seed filesystem, if the degraded mount option is set, we continue to
mount the fs if we don't find some devices in the seed filesystem. But we should stop
mounting if other errors happen. Fix it
Signed-off-by: Miao Xie <miaox@cn.fujitsu.com>
Signed-off-by: Chris Mason <clm@fb.com>
The problem is:
Task0(device scan task) Task1(device replace task)
scan_one_device()
mutex_lock(&uuid_mutex)
device = find_device()
mutex_lock(&device_list_mutex)
lock_chunk()
rm_and_free_source_device
unlock_chunk()
mutex_unlock(&device_list_mutex)
check device
Destroying the target device if device replace fails also has the same problem.
We fix this problem by locking uuid_mutex during destroying source device or
target device, just like the device remove operation.
It is a temporary solution, we can fix this problem and make the code more
clear by atomic counter in the future.
Signed-off-by: Miao Xie <miaox@cn.fujitsu.com>
Signed-off-by: Chris Mason <clm@fb.com>
We can build a new filesystem based a seed filesystem, and we need clone
the fs devices when we open the new filesystem. But someone might clear
the seed flag of the seed filesystem, then mount that filesystem and
remove some device. If we mount the new filesystem, we might access
a device list which was being changed when we clone the fs devices.
Fix it.
Signed-off-by: Miao Xie <miaox@cn.fujitsu.com>
Signed-off-by: Chris Mason <clm@fb.com>
