Clear any nl80211 messages that might contain keys after
processing them to avoid leaving their data in memory
"forever" after they've been freed.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
There's no need to put the values on the stack, just pass a
pointer to the data in the nl80211 message. This reduces stack
usage and avoids potential issues with putting sensitive data
on the stack.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
When freeing the keys stored for wireless extensions, clear the memory
to avoid having the key material stick around in memory "forever".
Similarly, when userspace overwrites a key, actually clear it instead
of just setting the key length to zero.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
When freeing the key, clear the memory to avoid having the
key material stick around in memory "forever".
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
When freeing the connect keys, clear the memory to avoid
having the key material stick around in memory "forever".
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Just a few fixes for radeon for 3.17.
* 'drm-fixes-3.17' of git://people.freedesktop.org/~agd5f/linux:
drm/radeon/dpm: set the thermal type properly for special configs
drm/radeon: reduce memory footprint for debugging
drm/radeon: add connector quirk for fujitsu board
drm/radeon: fix semaphore value init
drm/radeon: only use me/pfp sync on evergreen+
MAXQUOTAS value defines maximum number of quota types VFS supports.
This isn't necessarily the number of types gfs2 supports and with
addition of project quotas these two numbers stop matching. So make gfs2
use its private definition.
CC: cluster-devel@redhat.com
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
A few more radeon patches for 3.18. This patch set gives us more
flexibility with respect to buffer placement in vram with respect
to CPU access. E.g., if you know you will not need CPU access, we can
now pin outside of the CPU window, reducing contention for the
CPU window space.
* 'drm-next-3.18' of git://people.freedesktop.org/~agd5f/linux:
drm/radeon: add RADEON_GEM_NO_CPU_ACCESS BO creation flag (v4)
drm/radeon: Clean up assignment of TTM placement lpfn member for pinning
drm/radeon: Add RADEON_GEM_CPU_ACCESS BO creation flag
Fix a regression introduced by:
6d4ade986f GFS2: Add atomic_open support
where an early return misses d_splice_alias() which had been
adding the negative dentry.
Signed-off-by: Benjamin Coddington <bcodding@redhat.com>
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
Initially the tracepoint was added only to the APIC_DM_FIXED case,
also because it reported coalesced interrupts that only made sense
for that case. However, the coalesced argument is not used anymore
and tracing other delivery modes is useful, so hoist the call out
of the switch statement.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
using LVDS channel 1 on an i.MX53 leads to following error:
imx-ldb 53fa8008.ldb: unable to set di0 parent clock to ldb_di1
This comes from imx_ldb_set_clock with mux = 0. Mux parameter must be "1" for
reparenting di1 clock to ldb_di1. The value of the mux param comes from device
tree port settings.
On i.MX5, the internal two-input-multiplexer is used. Due to hardware limitations,
only one port (port@[0,1]) can be used for each channel (lvds-channel@[0,1],
respectively)
Documentation update suggested by Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Markus Niebel <Markus.Niebel@tq-group.com>
Fixes: e05c8c9a79 ("ARM: dts: imx53: Add IPU DI ports and endpoints, move imx-drm node to dtsi")
Cc: <stable@vger.kernel.org>
Acked-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
We should be able to talk to the PMIC at 400kHz. No need to talk at
the slow 100kHz.
As measured by ftrace (with a bunch of extra patches, since cpufreq
for rk808 hasn't landed yet):
before this change: cpu0_set_target() => ~500us
after this change: cpu0_set_target() => ~300us
Signed-off-by: Doug Anderson <dianders@chromium.org>
Reviewed-by Addy Ke <addy.ke@rock-chips.com>
Tested-by Addy Ke <addy.ke@rock-chips.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
We have APIC_DEFAULT_PHYS_BASE defined as 0xfee00000, which is also the address of
apic access page. So use this macro.
Signed-off-by: Tang Chen <tangchen@cn.fujitsu.com>
Reviewed-by: Gleb Natapov <gleb@kernel.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
1. Crypto/CPACF support: To enable the MSA4 instructions we have to
provide a common control structure for each SIE control block
2. Two cleanups found by a static code checker: one redundant assignment
and one useless if
3. Fix the page handling of the diag10 ballooning interface. If the
guest freed the pages at absolute 0 some checks and frees were
incorrect
4. Limit guests to 16TB
5. Add __must_check to interrupt injection code
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.11 (GNU/Linux)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=jt+E
-----END PGP SIGNATURE-----
Merge tag 'kvm-s390-next-20140910' of git://git.kernel.org/pub/scm/linux/kernel/git/kvms390/linux into kvm-next
KVM: s390: Fixes and features for next (3.18)
1. Crypto/CPACF support: To enable the MSA4 instructions we have to
provide a common control structure for each SIE control block
2. Two cleanups found by a static code checker: one redundant assignment
and one useless if
3. Fix the page handling of the diag10 ballooning interface. If the
guest freed the pages at absolute 0 some checks and frees were
incorrect
4. Limit guests to 16TB
5. Add __must_check to interrupt injection code
And associate all LED/OLED to PAD device
Signed-off-by: Ping Cheng <pingc@wacom.com>
Tested-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
It is assigned in buf[0] anyway.
Signed-off-by: Ping Cheng <pingc@wacom.com>
Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
changed to scnprintf(buf, PAGE_SIZE, ... ) as suggested in sysfs.txt
for show functions
Signed-off-by: Paul A. Tessier <phernost@gmail.com>
Signed-Off-by: Ping Cheng <pingc@wacom.com>
Tested-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
* Make domain_devices[] static __initdata
* Add and use rmobile_add_devices_to_domain
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=5GhR
-----END PGP SIGNATURE-----
Merge tag 'renesas-pm-cleanups-for-v3.18' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/cleanup
Pull "Renesas ARM Based SoC PM Cleanups for v3.18" from Simon Horman:
* Make domain_devices[] static __initdata
* Add and use rmobile_add_devices_to_domain
Signed-off-by: Arnd Bergmann <ardn@arndb.de>
* tag 'renesas-pm-cleanups-for-v3.18' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
ARM: shmobile: armadillo800eva legacy: Use rmobile_add_devices_to_domains()
ARM: shmobile: r8a7740: Clean up pm domain table
ARM: shmobile: r8a7740: Use rmobile_add_devices_to_domains()
ARM: shmobile: sh7372: Make domain_devices[] static __initdata
ARM: shmobile: mackerel: Make domain_devices[] static __initdata
Apparently can_restart() runs from a (timer-) interrupt and can call
flexcan_chip_[en|dis]able(), so avoid using usleep_range()
Signed-off-by: David Jander <david@protonic.nl>
Cc: linux-stable <stable@vger.kernel.org>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Add new PCI IDs to cover newer Intel SoCs such as Braswell.
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
That field has been deprecated in favour of getting the necessary information
from ACPI or DT.
However, we still need to deal systems that are PCI only (no ACPI to back up)
like Intel Bay Trail. In order to support such systems, we explicitly bind
setup() to the appropriate DMA filter function and its corresponding parameter.
Then when serial8250_request_dma() doesn't find the channel via ACPI or DT, it
falls back to use the given filter function.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Braswell SoC has two DMA controllers for LPSS. This patch adds them to
supported list in the PCI driver.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
On BayTrail platform DMA is not functional in the PCI mode, whereby it always
failed and exit at the point when it tries to get a clock. It causes the PCI
mode probe to exit with the error message:
dw_dmac_pci: probe of 0000:00:1e.0 failed with error -2
This patch moves clock operations to where it belongs to. Thus, the clock is
provided only in ACPI / non-PCI cases.
Reported-by: Chew, Chiau Ee <chiau.ee.chew@intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
The introduced filter function would be reused in the ACPI and DT cases since
in those cases we have to apply mandatory data to the requested channel. Thus,
patch moves platform driver to use it in that case.
The function unlikely can't be used by users of the driver due to an implicit
dependency to the dw_dmac_core module.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Instead of one request line member let's use both source and destination ones.
Usually we have no such hardware except Atmel MMC controller found on AVR32
platform (see arch/avr32/mach-at32ap/at32ap700x.c and
drivers/mmc/host/atmel-mci.c).
This patch removes slave_id usage since it'll be removed from the generic
structure in later. This breaks the non-ACPI / non-DT cases for the users of
the driver, i.e. SPI and HSUART. However, these cases mean only PCI enumerated
devices for now, which is anyway broken (considering more than one DMA
controller in the system) and this patch series is intended to fix that
eventually.
The ACPI and DT cases shall be aware of the channel direction when setting
request lines, but this is a minor problem that would be addressed in future.
Suggested-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Instead of exposing the possibility to set DMA registers CFG_HI and CFG_LO
strict user to provide handshake interfaces explicitly.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Hans-Christian Egtvedt <egtvedt@samfundet.no>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
In future we are going to remove the defaults of AHB masters from dw_dmac
driver. It means each user have to supply proper source and destination masters
by itself explicitly.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Hans-Christian Egtvedt <egtvedt@samfundet.no>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
There is a common storage for platform data related structures and definitions
inside kernel source tree. The patch moves file from include/linux to
include/linux/platform_data and renames it acoordingly. The users are also
updated.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
[For the arch/avr32/.* and .*sound/atmel.*]
Acked-by: Hans-Christian Egtvedt <egtvedt@samfundet.no>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
If encryption fails and we're using an RPA it may be because of a
conflict with another device. To avoid repeated failures the safest
action is to simply mark the RPA as expired so that a new one gets
generated as soon as the connection drops.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
We need to make sure to deqeueue the descriptor from the active list before
we call vchan_cookie_complete(). Also we need obviously only set chan->desc
to NULL after we stopped using it.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
add NO_PERIOD_WAKEUP to PCM INFO, which supports audio no IRQ mode
Signed-off-by: Qiao Zhou <zhouqiao@marvell.com>
Acked-by: Mark Brown <broonie@linaro.org>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
add DMA_PREP_INTERRUPT flag to support no_period_wakeup, in which
user space app doesn't want audio interrupt to wake up audio threads.
Signed-off-by: Qiao Zhou <zhouqiao@marvell.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
This is a trivial change to use a proper define for the NoInputNoOutput
IO capability instead of hard-coded values.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
The r8a7794 support is always compiled using ARCH_MULTIPLATFORM which
selects USE_OF. So #ifdef CONFIG_USE_OF is unnecessary.
Reported-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Support for the r8a7794 was recently added.
Enable it in the shmobile_defconfig to increase build coverage.
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Even if we have no connection-oriented channels we should perform the
L2CAP Information Request procedures before notifying L2CAP channels of
the connection. This is so that the L2CAP channel implementations can
perform checks on what the remote side supports (e.g. does it support
the fixed channel in question).
So far the code has relied on the l2cap_do_start() function to initiate
the Information Request, however l2cap_do_start() is used on a
per-channel basis and only for connection-oriented channels. This means
that if there are no connection-oriented channels on the system we would
never start the Information Request procedure.
This patch creates a new l2cap_request_info() helper function to
initiate the Information Request procedure, and ensures that it is
called whenever a BR/EDR connection has been established. The patch also
updates fixed channels to be notified of connection readiness only once
the Information Request procedure has completed.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
There are several places that need to determine the security level that
an LTK can provide. This patch adds a convenience function for this to
help make the code more readable.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
When the local IO capability is NoInputNoOutput any attempt to convert
the remote authentication requirement to a target security level is
futile. This patch makes sure that we set the target security level at
most to MEDIUM if the local IO capability is NoInputNoOutput.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
All the cases where we mark SMP commands as dissalowed are their
respective command handlers. We can therefore simplify the code by
always clearing the bit immediately after testing it. This patch
converts the corresponding test_bit() call to a test_and_clear_bit()
call and also removes the now unused SMP_DISALLOW_CMD macro.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
The SMP specification states that we should ignore any unknown bits from
the authentication requirement. We already have a define for masking out
unknown bits but we haven't used it in all places so far. This patch
adds usage of the AUTH_REQ_MASK to all places that need it and ensures
that we don't pass unknown bits onward to other functions.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
We do nothing else with the auth variable in smp_cmd_pairing_rsp()
besides passing it to tk_request() which in turn only cares about
whether one of the sides had the MITM bit set. It is therefore
unnecessary to assign a value to it until just before calling
tk_request(), and this value can simply be the bit-wise or of the local
and remote requirements.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Initialize USB PHY after every Link controller reset
Cc: 3.16+ <stable@vger.kernel.org>
Cc: Tim Bird <tbird20d@gmail.com>
Signed-off-by: Peter Chen <peter.chen@freescale.com>
Signed-off-by: Ivan T. Ivanov <iivanov@mm-sol.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
PHY drivers keep track of the current state of the hardware,
so don't change PHY settings under it.
Cc: 3.16+ <stable@vger.kernel.org>
Cc: Tim Bird <tbird20d@gmail.com>
Signed-off-by: Peter Chen <peter.chen@freescale.com>
Signed-off-by: Ivan T. Ivanov <iivanov@mm-sol.com>
Acked-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Resolve a missing-field-initializer warning, that is produced
by every reference to module_param_call, by using designated
initialization for the first field. That is enough to silence
the complaint.
The message is only seen when doing a W=2 build. I happened to be using gcc
4.8.3, but I think most versions would produce the warning when it is
enabled. It can either be silenced by using even a single designated
initializer as I did here, or providing values for all of the fields. Because
of the number of references to the macro, this change silences many warnings
in W=2 builds.
One instance of the full warning message looks like this:
/home/share/git/nn-mdr/include/linux/moduleparam.h:198:16: warning: missing
initializer for field ‘free’ of ‘struct kernel_param_ops’
[-Wmissing-field-initializers]
static struct kernel_param_ops __param_ops_##name = \
^
/home/share/git/nn-mdr/fs/fuse/inode.c:35:1: note: in expansion of macro
‘module_param_call’
module_param_call(max_user_bgreq, set_global_limit, param_get_uint,
^
/home/share/git/nn-mdr/include/linux/moduleparam.h:56:9: note: ‘free’
declared here
void (*free)(void *arg);
Signed-off-by: Mark Rustad <mark.d.rustad@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Merge misc fixes from Andrew Morton:
"10 fixes"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
fs/notify: don't show f_handle if exportfs_encode_inode_fh failed
fsnotify/fdinfo: use named constants instead of hardcoded values
kcmp: fix standard comparison bug
mm/mmap.c: use pr_emerg when printing BUG related information
shm: add memfd.h to UAPI export list
checkpatch: allow commit descriptions on separate line from commit id
sh: get_user_pages_fast() must flush cache
eventpoll: fix uninitialized variable in epoll_ctl
kernel/printk/printk.c: fix faulty logic in the case of recursive printk
mem-hotplug: let memblock skip the hotpluggable memory regions in __next_mem_range()
Currently we handle only ENOSPC. In case of other errors the file_handle
variable isn't filled properly and we will show a part of stack.
Signed-off-by: Andrey Vagin <avagin@openvz.org>
Acked-by: Cyrill Gorcunov <gorcunov@openvz.org>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
