..we will not miss you..
Signed-off-by: David Herrmann <dh.herrmann@gmail.com>
Reviewed-by: Thierry Reding <treding@nvidia.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Dave Airlie <airlied@redhat.com>
One step closer to dropping all the drm_bus_* code:
Add a driver->set_busid() callback and make all drivers use the generic
helpers. Nouveau is the only driver that uses two different bus-types with
the same drm_driver. This is totally broken if both buses are available on
the same machine (unlikely, but lets be safe). Therefore, we create two
different drivers for each platform during module_init() and set the
set_busid() callback respectively.
Signed-off-by: David Herrmann <dh.herrmann@gmail.com>
Reviewed-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
This field is unused and there is really no reason to optimize
unique-allocations. Drop it.
Signed-off-by: David Herrmann <dh.herrmann@gmail.com>
Reviewed-by: Thierry Reding <treding@nvidia.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Lets use kasprintf() to avoid pre-allocating the buffer. This is really
nothing to optimize for speed and the input is trusted, so kasprintf() is
just fine.
Signed-off-by: David Herrmann <dh.herrmann@gmail.com>
Reviewed-by: Thierry Reding <treding@nvidia.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Including headers somewhere else but at the top is ugly, deprecated and
was used in early days only to speed up compile-times. Those days are
over. Make headers independent and then move the inclusions to the top.
Signed-off-by: David Herrmann <dh.herrmann@gmail.com>
Reviewed-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
The sigdata structure is only used to group two fields in drm_device.
Inline it and make it an unnamed object.
Signed-off-by: David Herrmann <dh.herrmann@gmail.com>
Reviewed-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Calling vblank_disable_fn() will cause that function to no-op
if !dev->vblank_disable_allowed for some kms drivers, e.g.,
on nouveau-kms. This can cause the gpu vblank irq's to not get
disabled before freeing the dev->vblank array, so if a
vblank irq fires and calls into drm_handle_vblank() after
drm_vblank_cleanup() completes, it will cause use-after-free
access to dev->vblank array.
Call vblank_disable_and_save unconditionally, so vblank irqs
are guaranteed to be off, before we delete the data structures
on which they operate.
Signed-off-by: Mario Kleiner <mario.kleiner.de@gmail.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
[danvet: Fix subsystem name in patch subject.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
DRM_DEBUG_CODE is currently always set, so distributions enable it. The
only reason to keep support in code is if developers wanted to disable
debug support. Sounds unlikely.
All the DRM_DEBUG() printks are still guarded by a drm_debug read. So if
its cacheline is read once, they're discarded pretty fast.. There should
hardly be any performance penalty, it's even guarded by unlikely().
Signed-off-by: David Herrmann <dh.herrmann@gmail.com>
Reviewed-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
It is hardly possible to review the drmP.h includes, anymore. Order them
alphabetically, linux/ first, then asm/ and then local drm/ includes.
Since a long time ago, kernel headers have been converted to include
required headers themselves. No-one cares whether that means the compiler
has to include a header multiple times. In fact, GCC already does some
optimization regarding multiple inclusions if a sorrounding #ifndef is
present.
Signed-off-by: David Herrmann <dh.herrmann@gmail.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
With drm_memory.h gone, there is no header left that uses __OS_HAS_AGP.
Move it into drm_agpsupport.h (which is itself included from drmP.h) to
hide it harder from public eyes.
Signed-off-by: David Herrmann <dh.herrmann@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
The drm_memory.h header is only used to define PAGE_AGP, which is only
used in drm_memory.c. Fold the header into drm_memory.c and drop it.
Signed-off-by: David Herrmann <dh.herrmann@gmail.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Dave Airlie <airlied@redhat.com>
drmP.h is internal to the kernel. No need to keep the __KERNEL__
protection.
Signed-off-by: David Herrmann <dh.herrmann@gmail.com>
Reviewed-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
pte_wrprotect() is only used by drm_vm.c, so move the include there. Also
include it unconditionally, all architectures provide this header!
Furthermore, replace asm/current.h with sched.h, which includes
asm/current.h unconditionally. This way we get the same effect and avoid
direct asm/ includes. Furthermore, drop the weird __alpha__ protection.
It's safe to include sched.h everywhere (and the wait.h comment doesn't
apply, anyway).
Signed-off-by: David Herrmann <dh.herrmann@gmail.com>
Reviewed-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Move drm_agp_head to drm_agpsupport.h and drm_agp_mem into drm_legacy.h.
Unfortunately, drivers still heavily access drm_agp_head so we cannot
move it to drm_legacy.h. However, at least it's no longer visible in
drmP.h now (it's directly included from it, though).
Signed-off-by: David Herrmann <dh.herrmann@gmail.com>
Reviewed-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
This structure is unused, drop it.
Signed-off-by: David Herrmann <dh.herrmann@gmail.com>
Reviewed-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
In drm_release(), we currently call drm_remove_magic() if the drm_file
has a drm-magic attached. Therefore, once drm_master_release() is called,
the magic-list _must_ be empty.
By dropping the no-op cleanup, we can move "struct drm_magic_entry" to
drm_auth.c and avoid exposing it to all of DRM.
Signed-off-by: David Herrmann <dh.herrmann@gmail.com>
Reviewed-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Make all the drm_vma_entry handling local to drm_vm.c and hide it from
global headers. This requires to extract the inlined legacy drm_vma_entry
cleanup into a small helper and also move a weirdly placed drm_vma_info
helper into drm_vm.c.
Signed-off-by: David Herrmann <dh.herrmann@gmail.com>
Reviewed-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Move internal declarations to drm_legacy.h and add drm_legacy_*() prefix
to all legacy functions.
[airlied: add a bit of an explaination to drm_legacy.h]
Signed-off-by: David Herrmann <dh.herrmann@gmail.com>
Reviewed-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Radeon UMS is the last user of drm_buffer. Move it out of sight so radeon
can drop it together with UMS.
Signed-off-by: David Herrmann <dh.herrmann@gmail.com>
Reviewed-by: Thierry Reding <treding@nvidia.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Commit: e676253b19 [3/21] serial/8250: Add
support for RS485 IOCTLs, adds support for RS485 ioctls for 825_core on
all the archs. Unfortunaltely the definition of TIOCSRS485 and
TIOCGRS485 was missing on the ioctls.h file
Reported-by: kbuild test robot <fengguang.wu@intel.com>
Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@gmail.com>
Signed-off-by: Chris Zankel <chris@zankel.net>
The patch fixes the following build error of CLPS711X serial driver for
targets without GPIOLIB support:
>> drivers/tty/serial/serial_mctrl_gpio.c:44:6: error: redefinition of 'mctrl_gpio_set'
void mctrl_gpio_set(struct mctrl_gpios *gpios, unsigned int mctrl)
^
In file included from drivers/tty/serial/serial_mctrl_gpio.c:23:0:
drivers/tty/serial/serial_mctrl_gpio.h:80:6: note: previous definition of 'mctrl_gpio_set' was here
void mctrl_gpio_set(struct mctrl_gpios *gpios, unsigned int mctrl)
^
Reported-by: kbuild test robot <fengguang.wu@intel.com>
Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Commit: e676253b19 (serial/8250: Add
support for RS485 IOCTLs), adds support for RS485 ioctls for 825_core on
all the archs. Unfortunaltely the definition of TIOCSRS485 and
TIOCGRS485 was missing on the ioctls.h file
Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@gmail.com>
Acked-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Commit: e676253b19 (serial/8250: Add
support for RS485 IOCTLs), adds support for RS485 ioctls for 825_core on
all the archs. Unfortunaltely the definition of TIOCSRS485 and
TIOCGRS485 was missing on the ioctls.h file
Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Commit: e676253b19 (serial/8250: Add
support for RS485 IOCTLs), adds support for RS485 ioctls for 825_core on
all the archs. Unfortunaltely the definition of TIOCSRS485 and
TIOCGRS485 was missing on the ioctls.h file
Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Commit: e676253b19 [3/21] serial/8250: Add
support for RS485 IOCTLs, adds support for RS485 ioctls for 825_core on
all the archs. Unfortunaltely the definition of TIOCSRS485 and
TIOCGRS485 was missing on the ioctls.h file
Reported-by: kbuild test robot <fengguang.wu@intel.com>
Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Commit: e676253b19 [3/21] serial/8250: Add
support for RS485 IOCTLs, adds a building error on arch m32r.
All error/warnings:
drivers/tty/serial/8250/8250_core.c: In function 'serial8250_ioctl':
>> drivers/tty/serial/8250/8250_core.c:2859:3: error: implicit declaration of function 'copy_from_user' [-Werror=implicit-function-declaration]
if (copy_from_user(&rs485_config, (void __user *)arg,
^
>> drivers/tty/serial/8250/8250_core.c:2871:3: error: implicit declaration of function 'copy_to_user' [-Werror=implicit-function-declaration]
if (copy_to_user((void __user *)arg, &up->rs485,
^
cc1: some warnings being treated as errors
Reported-by: kbuild test robot <fengguang.wu@intel.com>
Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Tom Herbert says:
====================
net: enable GRO for IPIP and SIT
This patch sets populates the IPIP and SIT offload structures with
gro_receive and gro_complete functions. This enables use of GRO
for these. Also, fixed a problem in IPv6 where we were not properly
initializing flush_id.
Peformance results are below. Note that these tests were done on bnx2x
which doesn't provide RX checksum offload of IPIP or SIT (i.e. does
not give CHEKCSUM_COMPLETE). Also, we don't get 4-tuple hash for RSS
only 2-tuple in this case so all the packets between two hosts are
winding up on the same queue. Net result is the interrupting CPU is
the bottleneck in GRO (checksumming every packet there).
Testing:
netperf TCP_STREAM between two hosts using bnx2x.
* Before fix
IPIP
1 connection
6.53% CPU utilization
6544.71 Mbps
20 connections
13.79% CPU utilization
9284.54 Mbps
SIT
1 connection
6.68% CPU utilization
5653.36 Mbps
20 connections
18.88% CPU utilization
9154.61 Mbps
* After fix
IPIP
1 connection
5.73% CPU utilization
9279.53 Mbps
20 connections
7.14% CPU utilization
7279.35 Mbps
SIT
1 connection
2.95% CPU utilization
9143.36 Mbps
20 connections
7.09% CPU utilization
6255.3 Mbps
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Add ipv6_gro_receive and ipv6_gro_complete to sit_offload to
support GRO.
Signed-off-by: Tom Herbert <therbert@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add inet_gro_receive and inet_gro_complete to ipip_offload to
support GRO.
Signed-off-by: Tom Herbert <therbert@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In TCP gro we check flush_id which is derived from the IP identifier.
In IPv4 gro path the flush_id is set with the expectation that every
matched packet increments IP identifier. In IPv6, the flush_id is
never set and thus is uinitialized. What's worse is that in IPv6
over IPv4 encapsulation, the IP identifier is taken from the outer
header which is currently not incremented on every packet for Linux
stack, so GRO in this case never matches packets (identifier is
not increasing).
This patch clears flush_id for every time for a matched packet in
IPv6 gro_receive. We need to do this each time to overwrite the
setting that would be done in IPv4 gro_receive per the outer
header in IPv6 over Ipv4 encapsulation.
Signed-off-by: Tom Herbert <therbert@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Fix a missing __user annotation in a cast of a user space pointer (found by
checker).
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch adds missing space between "interface" and "by"
in bonding module parameter description.
Signed-off-by: Masanari Iida <standby24x7@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Use the much more common pr_warn instead of pr_warning.
Other miscellanea:
o Typo fixes submiting/submitting
o Coalesce formats
o Realign arguments
o Add missing terminating '\n' to formats
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
All the current support of mach-mxt_td60 board can be converted to devicetree.
Remove the board file.
Cc: Alan Carvalho de Assis <acassis@gmail.com>
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
net/ipv4/udp_offload.c:339:5: warning: symbol 'udp4_gro_complete' was
not declared. Should it be static?
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Tom Herbert <therbert@google.com>
Fixes: 57c67ff4bd ("udp: additional GRO support")
Acked-by: Tom Herbert <therbert@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
net/core/net_namespace.c:227:18: warning: incorrect type in argument 1
(different address spaces)
net/core/net_namespace.c:227:18: expected void const *<noident>
net/core/net_namespace.c:227:18: got struct net_generic [noderef]
<asn:4>*gen
We can use rcu_access_pointer() here as read-side access to the pointer
was removed at least one grace period ago.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
net/ipv6/udp_offload.c:159:5: warning: symbol 'udp6_gro_complete' was
not declared. Should it be static?
Signed-off-by: Eric Dumazet <edumazet@google.com>
Fixes: 57c67ff4bd ("udp: additional GRO support")
Cc: Tom Herbert <therbert@google.com>
Acked-by: Tom Herbert <therbert@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Remove one sparse warning :
net/ipv4/ip_sockglue.c:328:22: warning: incorrect type in assignment (different address spaces)
net/ipv4/ip_sockglue.c:328:22: expected struct ip_ra_chain [noderef] <asn:4>*next
net/ipv4/ip_sockglue.c:328:22: got struct ip_ra_chain *[assigned] ra
And replace one rcu_assign_ptr() by RCU_INIT_POINTER() where applicable.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
It's not used anywhere, so just remove these.
Signed-off-by: Daniel Borkmann <dborkman@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Instead of looping in the code let's use kernel extension to dump small
buffers.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Replace mdelay with usleep_range to avoid busy loop.
Signed-off-by: Hayes Wang <hayeswang@realtek.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
OMAP4, OMAP5 and DRA7 share a lot of common logic and data structures.
These have been enabled in the previous patches, however, this also
means that OMAP5 or DRA7 only builds also need to build OMAP4 logic.
Update to reuse OMAP4 logic.
This fixes the 'undefined reference to 'omap4_pm_init_early'' in
OMAP5 or DRA7 only builds.
Fixes: 6af16a1dac ("ARM: DRA7: Add hook in SoC initcalls to enable pm initialization")
Fixes: 628ed47170 ("ARM: OMAP5: Add hook in SoC initcalls to enable pm initialization")
Reported-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Linux manpage for recvmsg and sendmsg calls does not explicitly mention setting msg_namelen to 0 when
msg_name passed set as NULL. When developers don't set msg_namelen member in msghdr, it might contain garbage
value which will fail the validation check and sendmsg and recvmsg calls from kernel will return EINVAL. This will
break old binaries and any code for which there is no access to source code.
To fix this, we set msg_namelen to 0 when msg_name is passed as NULL from userland.
Signed-off-by: Ani Sinha <ani@arista.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Few packets have timestamping enabled. Exit sock_tx_timestamp quickly
in this common case.
Signed-off-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
not used anymore since ddecf0f
(net_sched: sfq: add optional RED on top of SFQ).
Signed-off-by: Florian Westphal <fw@strlen.de>
Acked-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Convert the normal transmit completion path from dev_kfree_skb_any()
to dev_consume_skb_any() to help keep dropped packet profiling
meaningful.
Signed-off-by: Rick Jones <rick.jones2@hp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Nikolay Aleksandrov says:
====================
bonding: get rid of bond->lock
This patch-set removes the last users of bond->lock and converts the places
that needed it for sync to use curr_slave_lock or RCU as appropriate.
I've run this with lockdep and have stress-tested it via loading/unloading
and enslaving/releasing in parallel while outputting bond's proc, I didn't
see any issues. Please pay special attention to the procfs change, I've
done about an hour of stress-testing on it and have checked that the event
that causes the bonding to delete its proc entry (NETDEV_UNREGISTER) is
called before ndo_uninit() and the freeing of the dev so any readers will
sync with that. Also ran sparse checks and there were no splats.
v2: Add patch 0001/cxgb4 bond->lock removal, RTNL should be held in the
notifier call, the other patches are the same. Also tested with
allmodconfig to make sure there're no more users of bond->lock.
Changes from the RFC:
use RCU in procfs instead of RTNL since RTNL might lead to a deadlock with
unloading and also is much slower. The bond destruction syncs with proc
via the proc locks. There's one new patch that converts primary_slave to
use RCU as it was necessary to fix a longstanding bugs in sysfs and
procfs and to make it easy to migrate bond's procfs to RCU. And of course
rebased on top of net-next current.
This is the first patch-set in a series that should simplify the bond's
locking requirements and will make it easier to define the locking
conditions necessary for the various paths. The goal is to rely on RTNL
and rcu alone, an extra lock would be needed in a few special cases that
would be documented very well.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
The usage of bond->lock in bond_main.c was completely unnecessary as it
didn't help to sync with anything, most of the spots already had RTNL.
Since there're no more users of bond->lock, remove it.
Signed-off-by: Nikolay Aleksandrov <nikolay@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
