There is at least one case in the Firmware API where the response to a
command changes the buffer size field in the AQ descriptor to a larger
number than what the request's buffer size started as. This is in addition
to setting an error flag and is in order to tell the requester how much
larger a buffer is required for the answer. We need to be sure not to
use that number when dumping the contents of the data buffer because it
can send us into the weeds and generate an invalid pointer exception.
This patch adds a max buffer size parameter to the print helper to be
sure the code knows when to stop.
Change-ID: Ib84f7ed72140fe9d600086d8f2002fc5d8753092
Signed-off-by: Shannon Nelson <shannon.nelson@intel.com>
Tested-by: Jim Young <jamesx.m.young@intel.com>
Tested-by: Sibai Li <sibai.li@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
This patch adds a check during handle_link_event for unqualified
module when link is down and there is a module plugged. If found,
print a message.
Change-ID: Ibd8666d77d3044c2a3dd4d762d3ae9ac6e18e943
Signed-off-by: Carolyn Wyborny <carolyn.wyborny@intel.com>
Tested-by: Jim Young <jamesx.m.young@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Change vsi->num_queue_pairs to equal the number that are configured
by the VF. This, in turn, limits the number of queues that are
enable/disabled. This fixes the mismatched case for when a VF configures
fewer queues than is allocated to it by the PF.
Change other sections to use alloc_queue_pairs as warranted.
Change-ID: I0de1b55c9084e7be6acc818da8569f12128a82c2
Signed-off-by: Ashish Shah <ashish.n.shah@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
The report passed to us from transport driver could potentially be
arbitrarily large, therefore we better sanity-check it so that raw_data
that we hold in picolcd_pending structure are always kept within proper
bounds.
Cc: stable@vger.kernel.org
Reported-by: Steven Vittitoe <scvitti@google.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
The report passed to us from transport driver could potentially be
arbitrarily large, therefore we better sanity-check it so that
magicmouse_emit_touch() gets only valid values of raw_id.
Cc: stable@vger.kernel.org
Reported-by: Steven Vittitoe <scvitti@google.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Enable the l2tsel bit on Rx queue contexts that are assigned to VFs so
that the VF can get the stripped VLAN tag.
Change-ID: I7d9bc56238a9ea9baf5e8a97e69b9e27ebb9d169
Signed-off-by: Shannon Nelson <shannon.nelson@intel.com>
Signed-off-by: Ashish Shah <ashish.n.shah@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
This helps know how many times the interface had to flush and replay FD
filter table, which gives an indication on how often we are getting FD
table full situation.
Also check on certain pf states before proceeding to add or delete
filters since we can't add or delete filters if we are in those states.
Change-ID: I97f5bbbea7146833ea61af0e08ea794fccba1780
Signed-off-by: Anjali Singhai Jain <anjali.singhai@intel.com>
Tested-by: Jim Young <jamesx.m.young@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Instead of disabling ATR when we get a programming error, we now
will wait it out to see if some room gets created by ATR rule deletion.
If we still have too many errors and ATR filter count did not change
much, its time to flush and replay. We no more auto-disable ATR when
we have errors in programming.
The disabling of ATR when we get programming error was buggy and
was still adding new rules and causing continuous errors. With this
policy change we flush instead when we see too many errors.
ATR is still disabled if we add a SB rule for TCP/IPv4 flow type,
more logic is added to re-enable it once all SB TCP/IPv4 rules are gone.
Change-ID: I77edcbeab9500c72a7e0bd7b5c5b113ced133a9c
Signed-off-by: Anjali Singhai Jain <anjali.singhai@intel.com>
Tested-by: Jim Young <jamesx.m.young@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Change the message that gets printed when adding/deleting a filter to
the SB, so that user can tell if a filter was added or deleted.
Print filter add failures only in case of SB filters. For ATR the
information is not useful to the user and hence suppress it unless in
higher debug mode.
Change-ID: I78d7a7a6ecfa82a38a582b0d7b4da038355e3735
Signed-off-by: Anjali Singhai Jain <anjali.singhai@intel.com>
Tested-by: Jim Young <jamesx.m.young@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
This patch changes the wording of the flow director add/remove and
asynchronous failure messages to include fd_id to try and add some
way to track the operations on a given fd_id. Its not perfect, but
its better than what we had as PCTYPE can apply to several different
filter requests.
This patch also removes a redundant message when filter
addition fails due to full condition.
Change-ID: Icf58b0603d4f162d9fc542f11a74866a907049f2
Signed-off-by: Carolyn Wyborny <carolyn.wyborny@intel.com>
Tested-by: Jim Young <jamesx.m.young@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Acer Aspire V5 doesn't set up the pins correctly at the cold boot
while the pins are corrected after the warm reboot. This patch gives
the proper pin configs statically in the driver as a workaround.
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=81561
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Adds to the readability of the ice1712 driver.
Signed-off-by: Konstantinos Tsimpoukas <kostaslinuxxx@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This patch is important for the MicroSOM implementation due to the
following details -
1. VIH of the Atheros phy is 1.7V.
2. NVCC_ENET which is the power domain of the MDIO pad is driven by the
PHY's LDO (i.e. either 1.8v or 2.5v).
3. The MicroSOM implements an onbouard 1.6kohm pull up to 3.3v (R3000).
In the case the PHY's LDO was 1.8v then there would be only a 100mV
margin for the signal to be acknowledged as high (1.8v-1.7v).
Due to that setting the pad as an open drain will let the 1.6kohm pull
that signal high to 3.3 that assures enough margins to the PHY to be
acked as '1' logic.
Signed-off-by: Rabeeh Khoury <rabeeh@solid-run.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
The tunneling method should properly use tunnel encapsulation.
Fixes problem with CHECKSUM_PARTIAL packets when TCP/UDP csum
offload is supported.
Thanks to Alex Gartrell for reporting the problem, providing
solution and for all suggestions.
Reported-by: Alex Gartrell <agartrell@fb.com>
Signed-off-by: Julian Anastasov <ja@ssi.bg>
Signed-off-by: Alex Gartrell <agartrell@fb.com>
Signed-off-by: Simon Horman <horms@verge.net.au>
Commit 7177a9c4b5 ("fs: call rename2 if exists") changed
"struct inode_operations"->rename == NULL if
"struct inode_operations"->rename2 != NULL .
TOMOYO needs to check for both ->rename and ->rename2 , or
a system on (e.g.) ext4 filesystem won't boot.
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Signed-off-by: Serge E. Hallyn <serge.hallyn@ubuntu.com>
Since we want to keep support for both older usb-phys as well as the
newer generic phys, lets first get the generic PHYs and fallback to
older USB-PHYs only when we fail to get the former.
This should fix the issue with ehci-exynos and ohci-exynos, wherein
in the absence of SAMSUNG_USB2PHY config symbol, we end up getting
the NOP_USB_XCEIV phy when the same is enabled. And thus the PHYs
are not configured properly.
Reported-by: Sachin Kamat <sachin.kamat@samsung.com>
Signed-off-by: Vivek Gautam <gautam.vivek@samsung.com>
Cc: Alan Stern <stern@rowland.harvard.edu>
Cc: Jingoo Han <jg1.han@samsung.com>
Tested-by: Sachin Kamat <sachin.kamat@samsung.com>
Acked-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
If user specifies that USB autosuspend must be disabled by module
parameter "usbcore.autosuspend=-1" then we must prevent
autosuspend of USB hub devices as well.
commit 596d789a21 introduced in v3.8 changed the original behaivour
and stopped respecting the usbcore.autosuspend parameter for hubs.
Fixes: 596d789a21 "USB: set hub's default autosuspend delay as 0"
Cc: [3.8+] <stable@vger.kernel.org>
Signed-off-by: Roger Quadros <rogerq@ti.com>
Tested-by: Michael Welling <mwelling@emacinc.com>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Update the drv260x dt binding document:
- Change the node name to the devices function not the device name.
- Add vbat-supply to the example.
- Fix indentation of the example.
Signed-off-by: Dan Murphy <dmurphy@ti.com>
Reviewed-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Add a check to ensure that LRA libraries are not mixed with the ERM mode.
If ERM mode and the Library is empty "OR" the LRA library then exit, as the
LRA and empty libraries are not applicable for the ERM actuator.
Signed-off-by: Dan Murphy <dmurphy@ti.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Removing some #defines that are not and should never be used pertaining to
I2C.
Removing:
define DRV260X_ALLOWED_R_BYTES 25
define DRV260X_ALLOWED_W_BYTES 2
define DRV260X_MAX_RW_RETRIES 5
define DRV260X_I2C_RETRY_DELAY 10
Signed-off-by: Dan Murphy <dmurphy@ti.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Some elantech v3 touchpad equipped laptops also have a trackpoint, before
this commit, these give sync errors. With this patch, the trackpoint is
provided as another input device: 'Elantech PS/2 TrackPoint'
The patch will also output messages that do not follow the expected pattern.
In the mean time I've seen 2 unknown packets occasionally:
0x04 , 0x00 , 0x00 , 0x00 , 0x00 , 0x00
0x00 , 0x00 , 0x00 , 0x02 , 0x00 , 0x00
I don't know what those are for, but they can be safely ignored.
Currently all packets that are not known to v3 touchpad and where
packet[3] (the fourth byte) lowest nibble is 6 are now recognized as
PACKET_TRACKPOINT and processed by the new elantech_report_trackpoint.
This has been verified to work on a laptop Lenovo L530 where the
touchpad/trackpoint combined identify themselves as:
psmouse serio1: elantech: assuming hardware version 3 (with firmware version 0x350f02)
psmouse serio1: elantech: Synaptics capabilities query result 0xb9, 0x15, 0x0c.
Reviewed-by: David Herrmann <dh.herrmann@gmail.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Ulrik De Bie <ulrik.debie-os@e2big.org>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
elantech_init() calls elantech_set_absolute_mode which sets the driver in
an absolute mode. When after this the elantech_init fails, it is best to
turn the ps/2 mouse emulation mode back on by calling psmouse_reset() so
that it can work as a regular mouse.
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Ulrik De Bie <ulrik.debie-os@e2big.org>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
When we fail to match data returned by E7 and EC reports we state that we
found "Unknown ALPS touchpad" whereas it is most likely it is not ALPS
touchpad at all. Change wording a bit and reduce the message to debug so
that it does not litter users logs and confuse them.
Reported-by: Paul Menzel <paulepanter@users.sourceforge.net>
Acked-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Zero hops in tb_path_activate before writing a new path.
This fixes the following scenario:
- Boot with a coldplugged device
- Unplug device
- Plug device back in
- PCI hotplug fails
The hotplug operation fails because our new path matches the (now
defunct) path which was setup by the firmware for the coldplugged
device. By writing zeros before writing our path configuration we can
force thunderbolt to retrain the path.
Signed-off-by: Andreas Noever <andreas.noever@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
There are several arch-specific media drivers that don't
require asm-specific includes and can be successfully
compiled on x86. Add COMPILE_TEST dependency for them, in
order to allow a broader test on those drivers.
That helps static analysis tools like Coverity to discover
eventual troubles there.
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
That helps some static checks, so enable it. While there, it was
noticed that linux/sizes.h was missing:
drivers/media/platform/exynos4-is/mipi-csis.c: In function ‘s5pcsis_s_rx_buffer’:
drivers/media/platform/exynos4-is/mipi-csis.c:114:31: error: ‘SZ_4K’ undeclared (first use in this function)
#define S5PCSIS_PKTDATA_SIZE SZ_4K
^
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
Allowing COMPILE_TEST here is trivial, but there's one missing
header to be added:
drivers/media/platform/ti-vpe/vpe.c: In function ‘vpe_probe’:
drivers/media/platform/ti-vpe/vpe.c:2266:56: error: ‘SZ_32K’ undeclared (first use in this function)
dev->base = devm_ioremap(&pdev->dev, dev->res->start, SZ_32K);
^
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
By allowing compilation on all archs, we can use static
analysis tools to test this driver.
In order to do that, replace asm/sizes.h by its generic
name (linux/sizes.h), with should keep doing the right
thing.
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
This patch readded a call to iss_put_clocks(), with was removed
by changeset 1153be56a1, causing a compilation breakage.
This reverts commit d4b3264646.
drivers/media/platform/s5p-jpeg/jpeg-hw-s5p.c: In function 's5p_jpeg_clear_int':
drivers/media/platform/s5p-jpeg/jpeg-hw-s5p.c:327:16: warning: variable 'reg' set but not used [-Wunused-but-set-variable]
unsigned long reg;
^
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
drivers/media/platform/soc_camera/atmel-isi.c: In function 'start_streaming':
drivers/media/platform/soc_camera/atmel-isi.c:387:6: warning: variable 'sr' set but not used [-Wunused-but-set-variable]
u32 sr = 0;
^
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
drivers/media/platform/soc_camera/mx2_camera.c: In function 'mx27_camera_emma_prp_reset':
drivers/media/platform/soc_camera/mx2_camera.c:812:6: warning: variable 'cntl' set but not used [-Wunused-but-set-variable]
u32 cntl;
^
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
drivers/media/platform/exynos4-is/media-dev.c: In function 'fimc_md_link_notify':
drivers/media/platform/exynos4-is/media-dev.c:1102:4: warning: suggest braces around empty body in an 'else' statement [-Wempty-body]
; /* TODO: Link state change validation */
^
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
drivers/media/platform/exynos4-is/mipi-csis.c: In function 's5pcsis_parse_dt':
drivers/media/platform/exynos4-is/mipi-csis.c:756:2: warning: comparison is always false due to limited range of data type [-Wtype-limits]
if (state->index < 0 || state->index >= CSIS_MAX_ENTITIES)
^
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
drivers/media/platform/s5p-mfc/s5p_mfc_dec.c:826:5: warning: no previous prototype for 'vidioc_decoder_cmd' [-Wmissing-prototypes]
int vidioc_decoder_cmd(struct file *file, void *priv,
^
drivers/media/platform/s5p-mfc/s5p_mfc.c: In function 's5p_mfc_runtime_resume':
drivers/media/platform/s5p-mfc/s5p_mfc.c:1314:6: warning: variable 'pre_power' set but not used [-Wunused-but-set-variable]
int pre_power;
^
drivers/media/platform/s5p-mfc/s5p_mfc_cmd_v5.c:163:25: warning: no previous prototype for 's5p_mfc_init_hw_cmds_v5' [-Wmissing-prototypes]
struct s5p_mfc_hw_cmds *s5p_mfc_init_hw_cmds_v5(void)
^
drivers/media/platform/s5p-mfc/s5p_mfc_cmd_v6.c:156:25: warning: no previous prototype for 's5p_mfc_init_hw_cmds_v6' [-Wmissing-prototypes]
struct s5p_mfc_hw_cmds *s5p_mfc_init_hw_cmds_v6(void)
^
drivers/media/platform/s5p-mfc/s5p_mfc_opr_v5.c: In function 's5p_mfc_run_dec_frame':
drivers/media/platform/s5p-mfc/s5p_mfc_opr_v5.c:1189:15: warning: variable 'index' set but not used [-Wunused-but-set-variable]
unsigned int index;
^
drivers/media/platform/s5p-mfc/s5p_mfc_enc.c: In function 'cleanup_ref_queue':
drivers/media/platform/s5p-mfc/s5p_mfc_enc.c:742:27: warning: variable 'mb_c_addr' set but not used [-Wunused-but-set-variable]
unsigned long mb_y_addr, mb_c_addr;
^
drivers/media/platform/s5p-mfc/s5p_mfc_enc.c:742:16: warning: variable 'mb_y_addr' set but not used [-Wunused-but-set-variable]
unsigned long mb_y_addr, mb_c_addr;
^
drivers/media/platform/s5p-mfc/s5p_mfc_enc.c: At top level:
drivers/media/platform/s5p-mfc/s5p_mfc_enc.c:1684:5: warning: no previous prototype for 'vidioc_encoder_cmd' [-Wmissing-prototypes]
int vidioc_encoder_cmd(struct file *file, void *priv,
^
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
That gets rid of the following warnings:
drivers/media/platform/s5p-mfc/s5p_mfc_ctrl.c:119:5: warning: no previous prototype for 's5p_mfc_release_firmware' [-Wmissing-prototypes]
int s5p_mfc_release_firmware(struct s5p_mfc_dev *dev)
^
drivers/media/platform/s5p-mfc/s5p_mfc_ctrl.c:132:5: warning: no previous prototype for 's5p_mfc_reset' [-Wmissing-prototypes]
int s5p_mfc_reset(struct s5p_mfc_dev *dev)
^
drivers/media/platform/s5p-mfc/s5p_mfc_ctrl.c:214:5: warning: no previous prototype for 's5p_mfc_init_hw' [-Wmissing-prototypes]
int s5p_mfc_init_hw(struct s5p_mfc_dev *dev)
^
drivers/media/platform/s5p-mfc/s5p_mfc_ctrl.c:291:6: warning: no previous prototype for 's5p_mfc_deinit_hw' [-Wmissing-prototypes]
void s5p_mfc_deinit_hw(struct s5p_mfc_dev *dev)
^
drivers/media/platform/s5p-mfc/s5p_mfc_ctrl.c:301:5: warning: no previous prototype for 's5p_mfc_sleep' [-Wmissing-prototypes]
int s5p_mfc_sleep(struct s5p_mfc_dev *dev)
^
drivers/media/platform/s5p-mfc/s5p_mfc_ctrl.c:330:5: warning: no previous prototype for 's5p_mfc_wakeup' [-Wmissing-prototypes]
int s5p_mfc_wakeup(struct s5p_mfc_dev *dev)
^
drivers/media/platform/s5p-mfc/s5p_mfc_ctrl.c:378:5: warning: no previous prototype for 's5p_mfc_open_mfc_inst' [-Wmissing-prototypes]
int s5p_mfc_open_mfc_inst(struct s5p_mfc_dev *dev, struct s5p_mfc_ctx *ctx)
^
drivers/media/platform/s5p-mfc/s5p_mfc_ctrl.c:420:6: warning: no previous prototype for 's5p_mfc_close_mfc_inst' [-Wmissing-prototypes]
void s5p_mfc_close_mfc_inst(struct s5p_mfc_dev *dev, struct s5p_mfc_ctx *ctx)
^
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
In file included from drivers/media/platform/exynos4-is/fimc-is-param.c:31:0:
drivers/media/platform/exynos4-is/fimc-is-errno.h:245:20: warning: type qualifiers ignored on function return type [-Wignored-qualifiers]
const char * const fimc_is_strerr(unsigned int error);
^
drivers/media/platform/exynos4-is/fimc-is-errno.h:246:20: warning: type qualifiers ignored on function return type [-Wignored-qualifiers]
const char * const fimc_is_param_strerr(unsigned int error);
^
drivers/media/platform/exynos4-is/fimc-is-param.c: In function 'fimc_is_set_initial_params':
drivers/media/platform/exynos4-is/fimc-is-param.c:670:23: warning: variable 'sensor' set but not used [-Wunused-but-set-variable]
struct sensor_param *sensor;
^
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
drivers/media/platform/s5p-g2d/g2d.c: In function 'job_abort':
drivers/media/platform/s5p-g2d/g2d.c:493:6: warning: variable 'ret' set but not used [-Wunused-but-set-variable]
int ret;
^
The job_abort function returns void. No sense to get the
returned argument, if this won't be used.
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
Declare this as static:
drivers/media/platform/s5p-jpeg/jpeg-core.c:732:6: warning: no previous prototype for 'exynos4_jpeg_set_huff_tbl' [-Wmissing-prototypes]
void exynos4_jpeg_set_huff_tbl(void __iomem *base)
^
And don't compile this dead code, while not needed:
drivers/media/platform/s5p-jpeg/jpeg-hw-exynos3250.c:236:14: warning: no previous prototype for 'exynos3250_jpeg_get_y' [-Wmissing-prototypes]
unsigned int exynos3250_jpeg_get_y(void __iomem *regs)
^
drivers/media/platform/s5p-jpeg/jpeg-hw-exynos3250.c:241:14: warning: no previous prototype for 'exynos3250_jpeg_get_x' [-Wmissing-prototypes]
unsigned int exynos3250_jpeg_get_x(void __iomem *regs)
^
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
drivers/media/platform/omap/omap_vout.c: In function 'omapvid_setup_overlay':
drivers/media/platform/omap/omap_vout.c:372:29: warning: variable 'pixheight' set but not used [-Wunused-but-set-variable]
int cropheight, cropwidth, pixheight, pixwidth;
^
drivers/media/platform/omap/omap_vout.c: In function 'vidioc_s_ctrl':
drivers/media/platform/omap/omap_vout.c:1454:24: warning: variable 'ovl' set but not used [-Wunused-but-set-variable]
struct omap_overlay *ovl;
^
drivers/media/platform/omap/omap_vout.c: In function 'vidioc_reqbufs':
drivers/media/platform/omap/omap_vout.c:1492:55: warning: comparison of unsigned expression < 0 is always false [-Wtype-limits]
if ((req->type != V4L2_BUF_TYPE_VIDEO_OUTPUT) || (req->count < 0))
^
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
When CONFIG_VIDEO_OMAP2_VOUT_VRFB is disabled, the compilation
will fail, as the function stubs are wrong. Also, as they weren't
declared as static inline, lots of warnings will be generated.
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
The needed bandwidth can be estimated using the symbol rate and
the rolloff factor. This could be useful for the frontend drivers,
as they don't need to calculate it themselves.
Reported-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
The fpc_table_addr is used as an unsigned integer that stores
an address. At the Kernel, the proper type for such integers
is unsigned long.
This generates lots of warnings when compiling on 64 bits.
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
