This patch adds support for the Atmel AT91SAM9261-EK board.
Signed-off-by: Andrew Victor <andrew@sanpeople.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
This patch adds support for the Atmel AT91SAM9260-EK board.
Signed-off-by: Andrew Victor <andrew@sanpeople.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
The master abort check in ixp2000_pci_read_config() recently started
failing due to the compiler optimising out the read access following
the clearing of pci_master_aborts. Mark pci_master_aborts volatile to
force the compiler to reload it on every use.
Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Add initial board support for the ADS Sphere board.
Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
This patch includes a number of small changes for integrating the
AT91SAM9261 and AT91SAM0260 support.
* Can only select support for one AT91 processor at a time.
* Remove most of the remaining static memory mapping for the
AT91RM9200.
* Reserve 1Mb of memory below the IO for mapping the internal SRAM
and any custom board-specific devices (ie, FPGA).
* The SAM9260 has more serial ports, so increase the maximum to 7.
* Define the standard chipselect addresses, and define other
addresses relative to those.
* CLOCK_TICK_RATE is different on the SAM926x's.
Signed-off-by: Andrew Victor <andrew@sanpeople.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
The bits used to select the USB clocks are different on the SAM9's.
Add support for the HCK clocks on the AT91SAM9261.
Patch from Patrice Vilchez & Nicolas Ferre
Signed-off-by: Andrew Victor <andrew@sanpeople.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
This patch converts the old CONFIG_MTD_PHYSMAP_ options to the new
physmap API by creating a physmap platform device for the NOR flash
found on the Atmel AT91RM9200-DK and AT91RM9200-EK boards.
Signed-off-by: Andrew Victor <andrew@sanpeople.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
This patch updates the Carmeva board support:
* Specify the MMC Write-protect and Detection pins.
* Add configuration of SPI devices.
Patch from Peer Georgi.
Signed-off-by: Andrew Victor <andrew@sanpeople.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Attached is a patch for at91rm9200_time.c which removes
the 'BUG: soft lockup detected on CPU#0!' message when
exiting suspended states.
Patch from Savin Zlobec
Signed-off-by: Andrew Victor <andrew@sanpeople.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
This patch includes the pin initialization, resource definition and
registration of the platform_devices for the SAM9260 and SAM9261
processors.
Signed-off-by: Andrew Victor <andrew@sanpeople.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Add support for the timer on the Atmel AT91SAM9261 and AT91SAM9260
processors.
Signed-off-by: Andrew Victor <andrew@sanpeople.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Can't analyze FIS directory in CYGSEM_REDBOOT_FLASH_COMBINED_FIS_AND_CONFIG
really.
Signed-off-by: Yoshinori Sato <ysato@users.sourceforge.jp>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
- ->init_queue() does not need the elevator passed in
- ->put_request() is a hot path and need not have the queue passed in
- cfq_update_io_seektime() does not need cfqd passed in
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
This patch modifies blk_rq_map/unmap_user() and the cdrom and scsi_ioctl.c
users so that it supports requests larger than bio by chaining them together.
Signed-off-by: Mike Christie <michaelc@cs.wisc.edu>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
The target mode support is mapping in bios using bio_map_user. The
current targets do not need their len to be aligned with a queue limit
so this check is causing some problems. Note: pointers passed into the
kernel are properly aligned by usersapace tgt code so the uaddr check
in bio_map_user is ok.
The major user, blk_bio_map_user checks for the len before mapping
so it is not affected by this patch.
And the semi-newly added user blk_rq_map_user_iov has been failing
out when the len is not aligned properly so maybe people have been
good and not sending misaligned lens or that path is not used very
often and this change will not be very dangerous. st and sg do not
check the length and we have not seen any problem reports from those
wider used paths so this patch should be fairly safe - for mm
and wider testing at least.
Signed-off-by: Mike Christie <michaelc@cs.wisc.edu>
Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
This adds a new timestamp message to blktrace, giving the timeofday when
we starting tracing. This helps user space correlate block trace events
with eg an application strace.
This requires a (compatible) update to blkparse. The changed blkparse
is still able to process traces generated by older kernels, and older
versions of blkparse should silently ignore the new records (because
they have a pid of 0).
Signed-off-by: Olaf Kirch <okir@suse.de>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
This patch fixes the
"jffs2_flash_writev(): Non-contiguous write to 00825300 with mtd_dataflash" bug.
Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
Signed-off-by: Artem Bityutskiy <dedekind@infradead.org>
Most architectures have fairly simple discontiguous memory - a
simple set of successive regions each containing some memory.
These can be described simply as a log2 of their maximum size,
along with the base address of the first region and the number
of regions.
The base address is already described by PHYS_PFN_OFFSET, and
the number of regions via the MAX_NUMNODES and the number of
online nodes.
If we then supply the log2 of their maximum size, all the other
discontigmem macros can move into generic code.
There is one exception: lh7a40x seems to have a more complicated
setup; this is left alone.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
This patch adds definitions for the new peripherals integrated in the
AT91SAM9260 and AT91SAM9261 processors: ECC, LCD, RSTC, RTT, SHDWC,
WDT, MATRIX, SDRAMC, SMC.
Signed-off-by: Andrew Victor <andrew@sanpeople.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
This patch updates the drivers (and other files) which include the
hardware headers. This fixes the breakage introduced in patches 3950/1
and 3951/1 (those patches were getting big).
The AVR32 architecture uses the same serial driver and had its own copy
of at91rm9200_pdc.h. Renamed it to at91_pdc.h
Signed-off-by: Andrew Victor <andrew@sanpeople.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Most of the AT91RM9200 user peripherals are also integrated into the
Atmel SAM9 range of processors. This patch renames the headers from
at91rm9200_xx.h to at91_xx.h to indicate they're not
at91rm9200-specific.
The new SAM9-specific registers and register bits have also been
defined.
Signed-off-by: Andrew Victor <andrew@sanpeople.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
The AT91RM9200 system header file (at91rm9200_sys.h) has been split into
separate header files for each peripheral. This was necessary since
some of the system peripherals are also used on AT91SAM9260 and
AT91SAM9261.
The new SAM9-specific register bits have also been defined.
Signed-off-by: Andrew Victor <andrew@sanpeople.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
This patch adds the initial support for the newer Atmel AT91SAM9261 and
AT91SAM9260 processors. The code is based on, and makes use of, the
existing AT91RM9200 support.
Signed-off-by: Andrew Victor <andrew@sanpeople.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
This patch replaces the arch_identify() in system.h with a set of
cpu_is_XXX() macro's. This allows for compile-time checking of the
target AT91 processor.
Original patch from David Brownell.
Signed-off-by: Andrew Victor <andrew@sanpeople.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
The external interrupt sources are different on the various AT91
processors. This patch introduces the global 'at91_extern_irq' variable
that contains a bitset of the available external interrupt sources.
The processor reset mechanism also differs on the various AT91
processors. This patch also adds a global 'at91_arch_reset' callback
(from system.h) into the processor-specific code to perform the reset.
Signed-off-by: Andrew Victor <andrew@sanpeople.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
This patch renames the arch/arm/mach-at91rm9200/devices.c file to
at91rm9200_devices.c. The file contains AT91RM9200-specific code, so we
will need separate files for the SAM9 processors.
Signed-off-by: Andrew Victor <andrew@sanpeople.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
There's no point having the Versatile PB initialisation using an
arch_initcall() and then checking whether it's running on a
Versatile PB board - this is what the .init_machine function
pointer in the machine description is for. Use it.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
The gfs2_fsync() function was doing a journal flush on each
and every call. While this is correct, its also a lot of
overhead. This patch means that on fdatasync flushes we
rely on the VFS to flush the data for us and we don't do
a journal flush unless we really need to.
We have to do a journal flush for stuffed files though because
they have the data and the inode metadata in the same block.
Journaled files also need a journal flush too of course.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
The comment explains why we use the bio functions to read
the super block.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
Cc: Andrew Morton <akpm@osdl.org>
Cc: Srinivasa Ds <srinivasa@in.ibm.com>
While mounting the gfs2 filesystem,our test team had a problem and we
got this error message.
=======================================================
GFS2: fsid=: Trying to join cluster "lock_nolock", "dasde1"
GFS2: fsid=dasde1.0: Joined cluster. Now mounting FS...
GFS2: not a GFS2 filesystem
GFS2: fsid=dasde1.0: can't read superblock: -22
==========================================================================
On debugging further we found that problem is while reading the super
block(gfs2_read_super) and comparing the magic number in it.
When I replace the submit_bio() call(present in gfs2_read_super) with
the sb_getblk() and ll_rw_block(), mount operation succeded.
On further analysis we found that before calling submit_bio(),
bio->bi_sector was set to "sector" variable. This "sector" variable has
the same value of bh->b_blocknr(block number). Hence there is a need to
multiply this valuwith (blocksize >> 9)(9 because,sector size
2^9,samething happens in ll_rw_block also, before calling submit_bio()).
So I have developed the patch which solves this problem. Please let me
know your comments.
================================================================
Signed-off-by: Srinivasa DS <srinivasa@in.ibm.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
As pointed out by Adrian Bunk, the gfs2_check_acl() function is no
longer used. This patch removes it and renamed gfs2_check_acl_locked()
to gfs2_check_acl() since we only need one variant of that function now.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
Cc: Adrian Bunk <bunk@stusta.de>
This fixes the following gcc warnings generated on
the architectures where uint64_t != unsigned long long (e.g. ppc64).
fs/dlm/rcom.c:154: warning: format '%llx' expects type 'long long unsigned int', but argument 4 has type 'uint64_t'
fs/dlm/rcom.c:154: warning: format '%llx' expects type 'long long unsigned int', but argument 5 has type 'uint64_t'
fs/dlm/recoverd.c:48: warning: format '%llx' expects type 'long long unsigned int', but argument 3 has type 'uint64_t'
fs/dlm/recoverd.c:202: warning: format '%llx' expects type 'long long unsigned int', but argument 3 has type 'uint64_t'
fs/dlm/recoverd.c:210: warning: format '%llx' expects type 'long long unsigned int', but argument 3 has type 'uint64_t'
Signed-off-by: Ryusuke Konishi <ryusuke@osrg.net>
Signed-off-by: Patrick Caulfield <pcaulfie@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
Fix function parameter typing:
fs/gfs2/glock.c💯 warning: function declaration isn't a prototype
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
We often abort a recovery after sending a status request to a remote node.
We want to ignore any potential status reply we get from the remote node.
If we get one of these unwanted replies, we've often moved on to the next
recovery message and incremented the message sequence counter, so the
reply will be ignored due to the seq number. In some cases, we've not
moved on to the next message so the seq number of the reply we want to
ignore is still correct, causing the reply to be accepted. The next
recovery message will then mistake this old reply as a new one.
To fix this, we add the flag RCOM_WAIT to indicate when we can accept a
new reply. We clear this flag if we abort recovery while waiting for a
reply. Before the flag is set again (to allow new replies) we know that
any old replies will be rejected due to their sequence number. We also
initialize the recovery-message sequence number to a random value when a
lockspace is first created. This makes it clear when messages are being
rejected from an old instance of a lockspace that has since been
recreated.
Signed-off-by: David Teigland <teigland@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
When the not_ready routine sends a "fake" status reply with blank status
flags, it needs to use the correct size for a normal STATUS_REPLY by
including the size of the would-be config parameters. We also fill in the
non-existant config parameters with an invalid lvblen value so it's easier
to notice if these invalid paratmers are ever being used.
Signed-off-by: David Teigland <teigland@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
Fix a printk format warning in fs/gfs2/log.c:
fs/gfs2/log.c:322: warning: format '%llu' expects type 'long long unsigned int', but argument 3 has type 'sector_t'
Signed-off-by: Ryusuke Konishi <ryusuke@osrg.net>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
Requests that arrive after recovery has started are saved in the
requestqueue and processed after recovery is done. Some of these requests
are purged during recovery if they are from nodes that have been removed.
We move the purging of the requests (dlm_purge_requestqueue) to later in
the recovery sequence which allows the routine saving requests
(dlm_add_requestqueue) to avoid filtering out requests by nodeid since the
same will be done by the purge. The current code has add_requestqueue
filtering by nodeid but doesn't hold any locks when accessing the list of
current nodes. This also means that we need to call the purge routine
when the lockspace is being shut down since the add routine will not be
rejecting requests itself any more.
Signed-off-by: David Teigland <teigland@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
The readdirplus NFS operation can result in gfs2_getattr being
called with the glock already held. In this case we do not want
to try and grab the lock again.
This fixes Red Hat bugzilla #215727
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
Since gfs2_permission may be called either from the VFS (in which case
we need to obtain a shared glock) or from GFS2 (in which case we already
have a glock) we need to test to see whether or not a lock is required.
The original test was buggy due to a potential race. This one should
be safe.
This fixes Red Hat bugzilla #217129
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
Since the superblock and the address_space are determined by the
glock, we might as well just pass that as the argument since all
the callers already have that available.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
This fixes a bug which resulted in poor performance due to flushing
the journal too often. The code path in question was via the inode_go_sync()
function in glops.c. The solution is not to flush the journal immediately
when inodes are ejected from memory, but batch up the work for glockd to
deal with later on. This means that glocks may now live on beyond the end of
the lifetime of their inodes (but not very much longer in the normal case).
Also fixed in this patch is a bug (which was hidden by the bug mentioned above) in
calculation of the number of free journal blocks.
The gfs2_logd process has been altered to be more responsive to the journal
filling up. We now wake it up when the number of uncommitted journal blocks
has reached the threshold level rather than trying to flush directly at the
end of each transaction. This again means doing fewer, but larger, log
flushes in general.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
The go_sync callback took two flags, but one of them was set on every
call, so this patch removes once of the flags and makes the previously
conditional operations (on this flag), unconditional.
The go_inval callback took three flags, each of which was set on every
call to it. This patch removes the flags and makes the operations
unconditional, which makes the logic rather more obvious.
Two now unused flags are also removed from incore.h.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
GFS2 requires the CRC32 library function. This was reported by
Toralf Förster.
Cc: Toralf Förster <toralf.foerster@gmx.de>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
When deleting directory entries, we set the inum.no_addr to zero
in a dirent when its the first dirent in a block and thus cannot
be merged into the previous dirent as is the usual case. In gfs1,
inum.no_formal_ino was used instead.
This patch changes gfs2 to set both inum.no_addr and inum.no_formal_ino
to zero. It also changes the test from just looking at inum.no_addr to
look at both inum.no_addr and inum.no_formal_ino and a sentinel is
now considered to be a dirent in which _either_ (or both) of them
is set to zero.
This resolves Red Hat bugzillas: #215809, #211465
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
