For UP to SMP kexec to work we need to jump into pSeries_secondary_smp_init
event on a UP + KEXEC kernel. The secondary cpus will not find their hw_cpu_id
in the paca and so they'll jump into kexec_wait, ready for a kexec.
Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>
Because smp_release_cpus() is built for SMP || KEXEC, it's not safe to
unconditionally call it from setup_system(). On a UP && KEXEC kernel we'll
start up the secondary CPUs which will then go beserk and we die.
Simple fix is to conditionally call smp_release_cpus() in setup_system(). With
that in place we don't need the dummy definition of smp_release_cpus() because
all call sites are #ifdef'ed either SMP or KEXEC.
Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>
Fallback gracefully when reading /proc/ppc64/lparcfg when the /rtas
device node can't be found.
Signed-off-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Paul Mackerras <paulus@samba.org>
A few symbols are exported twice, remove them from ppc_ksyms.c
Remove users of sys_ctrler in arch/ppc/
WARNING: vmlinux: duplicate symbol '__delay' previous definition was in vmlinux
WARNING: vmlinux: duplicate symbol '__up' previous definition was in vmlinux
WARNING: vmlinux: duplicate symbol '__down' previous definition was in vmlinux
WARNING: vmlinux: duplicate symbol '__down_interruptible' previous definition was in vmlinux
WARNING: vmlinux: duplicate symbol 'sys_ctrler' previous definition was in vmlinux
WARNING: vmlinux: duplicate symbol 'strncat' previous definition was in vmlinux
WARNING: vmlinux: duplicate symbol 'strncmp' previous definition was in vmlinux
WARNING: vmlinux: duplicate symbol 'strchr' previous definition was in vmlinux
WARNING: vmlinux: duplicate symbol 'strrchr' previous definition was in vmlinux
WARNING: vmlinux: duplicate symbol 'strnlen' previous definition was in vmlinux
WARNING: vmlinux: duplicate symbol 'strpbrk' previous definition was in vmlinux
WARNING: vmlinux: duplicate symbol 'memscan' previous definition was in vmlinux
WARNING: vmlinux: duplicate symbol 'strstr' previous definition was in vmlinux
Signed-off-by: Olaf Hering <olh@suse.de>
Signed-off-by: Paul Mackerras <paulus@samba.org>
This fixes a regression which was introduced by moving ppc32 to use
the same sort of lockless gettimeofday as ppc64 has been using for
some time. This involves getting the timebase and performing some
simple arithmetic to convert it to seconds and microseconds. However,
the factor and offset used there weren't being updated when NTP
varied the tick length using adjtimex. 64-bit didn't notice the
problem because it had a hook in the 32-bit adjtimex compat routine
that attempted to work out what the generic timekeeping code would
do and alter the factor and offset to match. However, that code
was very complex and it wasn't clear that it still matched what the
generic code would do.
Now we use the generic current_tick_length() routine that was recently
added to check that the current tick will be as long as we expect; if
not we recompute the factor and offset. This keeps gettimeofday and
xtime in sync. In addition we check that gettimeofday hasn't got ahead
of xtime on each timer interrupt; if it has, we resync.
Signed-off-by: Paul Mackerras <paulus@samba.org>
Workaround a cscope bug where a trailing ':' in VPATH makes it segfault
and let it build the cross-reference succesfully.
VPATH=/home/mattia/devel/kernel/git/linux-2.6: cscope -b
[1] 17555 segmentation fault VPATH=/home/mattia/devel/kernel/git/linux-2.6: cscope -b
Signed-off-by: Mattia Dongili <malattia@linux.it>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Do not try to look up section name until we know it is not a special
section. Otherwise we will address outside legal space and segfault.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
A combination of calling modpost with option -a and MODVERDIR undefined
caused segmentation fault. So provide a default value and accept the
error messages it generates instead.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
checkconfig.pl is no longer needed now that autoconf.h is automatically
included. Remove it and all references to it.
Signed-off-by: Brian Gerst <bgerst@didntduck.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
With the current way of generating the Makefile in the output directory
for builds outside of the source tree, specifying real targets (rather
than phony ones) doesn't work in an already (partially) built tree, as
the stub Makefile doesn't have any dependency information available.
Thus, all targets where files may actually exist must be listed
explicitly and, due to what I'd call a make misbehavior, directory
targets must then also be special cased.
Signed-Off-By: Jan Beulich <jbeulich@novell.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
While the recent change to also escape # symbols when storing C-file
compilation command lines was helpful, it should be in effect for all
command lines, as much as the dollar escaping should be in effect for
C-source compilation commands. Additionally, for better readability and
maintenance, consolidating all the escaping (single quotes, dollars,
and now sharps) was also desirable.
Signed-Off-By: Jan Beulich <jbeulich@novell.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Move $(CC) support functions to Kbuild.include so they are available
in the kbuild files.
In addition the following was done:
o as-option documented in Documentation/kbuild/makefiles.txt
o Moved documentation to new section to match
new scope of functions
o added cc-ifversion used to conditionally select a text string
dependent on actual $(CC) version
o documented cc-ifversion
o change so Kbuild.include is read before the kbuild file
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Section mismatch is identified as references to .init*
sections from non .init sections. And likewise references
to .exit.* sections outside .exit sections.
.init.* sections are discarded after a module is initialized
and references to .init.* sections are oops candidates.
.exit.* sections are discarded when a module is built-in and
thus references to .exit are also oops candidates.
The checks were possible to do using 'make buildcheck' which
called the two perl scripts: reference_discarded.pl and
reference_init.pl. This patch just moves the same functionality
inside modpost and the scripts are then obsoleted.
They will though be kept for a while so users can do double
checks - but note that some .o files are skipped by the perl scripts
so result is not 1:1.
All credit for the concept goes to Keith Owens who implemented
the original perl scrips - this patch just moves it to modpost.
Compared to the perl script the implmentation in modpost will be run
for each kernel build - thus catching the error much sooner, but
the downside is that the individual .o file are not always identified.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
To avoid stale modules located in $(MODVERDIR) aka .tmp_versions/
always delete the directory when building an external module.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
uname -m on MIPS can give a number of results, such as mips64. We
need to add another substitution to the sed call for SUBARCH in the
main Makefile.
Signed-off-by: Martin Michlmayr <tbm@cyrius.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
This matches the fix for a bug seen on x86-64. Test booted on old hardware
that had 32 byte cachelines to begin with.
Signed-off-by: Zach Brown <zach.brown@oracle.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
In modpost introduce a check for symbols exported twice.
This check caught only one victim (inet_bind_bucket_create) for
which a patch is already sent to netdev.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
With following patch a second option is enabled to obtain
symbol information from a second external module when a
external module is build.
The recommended approach is to use a common kbuild file but
that may be impractical in certain cases.
With this patch one can copy over a Module.symvers from one
external module to make symbols (and symbol versions) available
for another external module.
Updated documentation in Documentation/kbuild/modules.txt
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Support building individual files when dealing with separate modules.
So say you have a module named "foo" which consist of two .o files bar.o
and fun.o.
You can then do:
make -C $KERNELSRC M=`pwd` bar.o
make -C $KERNELSRC M=`pwd` bar.lst
make -C $KERNELSRC M=`pwd` bar.i
make -C $KERNELSRC M=`pwd` / <= will build all .o files
and link foo.o
make -C $KERNELSRC M=`pwd` foo.ko <= will build the module
and do the modpost step
to create foo.ko
The above will also work if the external module is placed in a
subdirectory using a hirachy of kbuild files.
Thanks to Andreas Gruenbacher <agruen@suse.de> for initial feature
request / bug report.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Serio and gameport cores do not depend on other drivers and are
used by code living outside of drivers/input/{gameport|serio}.
Registering them at subsystem level guarantees that they are
fully initialized before anyone tries to use them.
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
The conversion was generated via scripts, and the result was validated
automatically via a script as well.
Amijoy conversion was done by Arjan van de Ven.
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
The conversion was generated via scripts, and the result was validated
automatically via a script as well.
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
The conversion was generated via scripts, and the result was validated
automatically via a script as well.
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
The conversion was generated via scripts, and the result was validated
automatically via a script as well.
Signed-off-by: Arjan van de Ven <arjan@infradead.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
The conversion was generated via scripts, and the result was validated
automatically via a script as well.
Signed-off-by: Arjan van de Ven <arjan@infradead.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
Patch claiming to remove enable_irq_nosync() had left it alive but killed
disable_irq_nosync() instead...
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
1) it should use nr_processes(), not nr_threads; otherwise we are getting
very confused find(1) and friends, among other things.
2) better do that at stat() time than at every damn lookup in procfs root.
Patch had been sitting in FC4 kernels for many months now...
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
sbp2.c mangles INQUIRY response in a way that only applies to standard
inquiry data (i.e. when both cmddt and evpd bits are 0). Leave other cases
alone; e.g. when asking for VPD the length of reply is in byte 3, not 4
and byte 4 is the first byte of device serial number.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
audit_log_exit() is called from atomic contexts and gets explicit
gfp_mask argument; it should use it for all allocations rather
than doing some with gfp_mask and some with GFP_KERNEL.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
The Xgl on r300 doesn't work unless you add a verify bitblt function to the
DRM, and we need to pass TX_CNTL to flush texture caches.
Signed-off-by: Dave Airlie <airlied@linux.ie>
acpi_rs_get_list_length() needs to account for all the vendor-defined data
bytes. Failing to include these causes buffers to be sized too small,
which causes slab corruption when we later convert AML to resources and run
off the end of the buffer.
This causes slab corruption on machines that use ACPI vendor-defined
resources. All HP ia64 machines do, and I'm told that some NEC machines
may as well.
Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Cc: "Brown, Len" <len.brown@intel.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Make sure maxnodes is safe size before calculating nlongs in
get_nodes().
Signed-off-by: Chris Wright <chrisw@sous-sol.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
I got all of these backwards. We want to return
min(input timeout, new timeout)
to userspace to prevent increasing the time-remaining value.
Thanks to Ernst Herzberg <earny@net4u.de> for reporting and diagnosing.
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
One of the parameters to the __pud_free_tlb() macro for powerpc is
incorrect (see patch) . We get away with it by accident, because the one
place the macro is called, the second parameter is a variable named "pud".
Signed-off-by: David Gibson <dwg@au1.ibm.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Don't print KERN_INFO in the middle of a printk line.
printk(KERN_INFO "OEM ID: %s ",str);
is just above this. This is already fixed up in i386 copy.
Signed-off-by: Martin J. Bligh <mbligh@google.com>
Cc: Andi Kleen <ak@muc.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
