When a field has been initialized, `init!`/`pin_init!` create a reference
or pinned reference to the field so it can be accessed later during the
initialization of other fields. However, the reference it created is
incorrectly `&'static` rather than just the scope of the initializer.
This means that you can do
init!(Foo {
a: 1,
_: {
let b: &'static u32 = a;
}
})
which is unsound.
This is caused by `&mut (*#slot).#ident`, which actually allows arbitrary
lifetime, so this is effectively `'static`. Somewhat ironically, the safety
justification of creating the accessor is.. "SAFETY: TODO".
Fix it by adding `let_binding` method on `DropGuard` to shorten lifetime.
This results in exactly what we want for these accessors. The safety and
invariant comments of `DropGuard` have been reworked; instead of reasoning
about what caller can do with the guard, express it in a way that the
ownership is transferred to the guard and `forget` takes it back, so the
unsafe operations within the `DropGuard` can be more easily justified.
Fixes: 42415d163e ("rust: pin-init: add references to previously initialized fields")
Cc: stable@vger.kernel.org
Signed-off-by: Gary Guo <gary@garyguo.net>
Link: https://patch.msgid.link/20260427-pin-init-fix-v3-2-496a699674dd@garyguo.net
[ Reworded for missing word. - Miguel ]
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Instead of having the reference creation serving dual-purpose as both for
let bindings and alignment check, detangle them so that the alignment check
is done explicitly in `make_field_check`. This is more robust against
refactors that may change the way let bindings are created.
Cc: stable@vger.kernel.org
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Signed-off-by: Gary Guo <gary@garyguo.net>
Link: https://patch.msgid.link/20260427-pin-init-fix-v3-1-496a699674dd@garyguo.net
[ Reworded for typo. - Miguel ]
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
32-bit UML builds can be configured either by setting CONFIG_64BIT=n or
with SUBARCH=i386. Both work with Rust-for-Linux when clang is the
compiler, but when SUBARCH=i386, we don't set a bindgen target correctly if
gcc is the compiler.
Add the appropriate bindgen target configuration for i386, as is done in
Makefile.clang.
[ For reference, the errors look like:
BINDGEN rust/bindings/bindings_generated.rs
error: unsupported option '-mno-sse' for target ''
...
error: unknown target triple 'unknown'
panicked at .../bindgen-0.72.1/ir/context.rs:562:15:
libclang error; possible causes include:
...
- Miguel ]
Fixes: ab0f4cedc3 ("arch: um: rust: Add i386 support for Rust")
Signed-off-by: David Gow <david@davidgow.net>
Link: https://patch.msgid.link/20260425034125.53866-1-david@davidgow.net
[ Added space in title. - Miguel ]
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Jeremy Kerr says:
====================
net: mctp: test: minor kunit test fixes
This series provides two fixes in the MCTP kunit tests - one exposed by
ktr, and one found while debugging the former on different VM configs.
====================
Link: https://patch.msgid.link/20260429-dev-mctp-test-fixes-v1-0-1127b7425809@codeconstruct.com.au
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In our test cases, we typically feed a packet sequence into the routing
code, then inspect the device's TXed skbs to assert specific behaviours.
Using dev_queue_xmit() for our TX path introduces a fair bit of
complexity between the test packet sequence and the test device's
ndo_start_xmit callback; which may mean that the skbs have not hit the
device at the point we're inspecting the TXed skb list.
Use dev_direct_xmit instead, as we want a direct a path as possible
here, and the test dev does not need any queueing, scheduling or flow
control.
Fixes: 6ab578739a ("net: mctp: test: move TX packetqueue from dst to dev")
Reported-by: kernel test robot <oliver.sang@intel.com>
Closes: https://lore.kernel.org/oe-lkp/202604281320.525eee17-lkp@intel.com
Signed-off-by: Jeremy Kerr <jk@codeconstruct.com.au>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20260429-dev-mctp-test-fixes-v1-2-1127b7425809@codeconstruct.com.au
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Invalid sockaddr padding will cause bind() to fail; ensure we have a
zeroed address in the testcase.
Fixes: 0d8647bc74 ("net: mctp: don't require a route for null-EID ingress")
Signed-off-by: Jeremy Kerr <jk@codeconstruct.com.au>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20260429-dev-mctp-test-fixes-v1-1-1127b7425809@codeconstruct.com.au
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The variable this_hwcap is initialized to 0 for each loop, it is not
necessary to do the bit clearance since this_hwcap is still 0 at this
point, clearing the source_isa is enough here.
Signed-off-by: Hui Wang <hui.wang@canonical.com>
Link: https://patch.msgid.link/20260430045350.22213-1-hui.wang@canonical.com
Signed-off-by: Paul Walmsley <pjw@kernel.org>
Merge assorted ACPI support fixes for 7.1-rc2:
- Fix EINJV2 memory error injection in APEI (Tony Luck)
- Add missing notifier_block structure forward declaration to
acpi_bus.h (Bartosz Golaszewski)
- Fix related_cpus inconsistency during CPU hotplug in the ACPI CPPC
library (Jinjie Ruan)
- Add a quirk to force native backlight on HP OMEN 16 (8A44) in the
ACPI video bus driver (Shivam Kalra)
* acpi-apei:
ACPI: APEI: EINJ: Fix EINJV2 memory error injection
ACPICA: Provide #defines for EINJV2 error types
* acpi-bus:
ACPI: bus: add missing forward declaration to acpi_bus.h
* acpi-cppc:
ACPI: CPPC: Fix related_cpus inconsistency during CPU hotplug
* acpi-video:
ACPI: video: force native backlight on HP OMEN 16 (8A44)
When parsing device properties from ftrace data, the devprops() function
assumes that each line has at least three fields and that the third field
(f[2]) always contains a valid integer. However, due to incomplete or
corrupted ftrace logs, f[2] may be missing, empty, or non-existent.
This can lead to the following error:
Traceback (most recent call last):
File "../sleepgraph.py", line 7142, in <module>
stamp = rerunTest(sysvals.outdir)
File "../sleepgraph.py", line 6255, in rerunTest
testruns, stamp = processData()
File "../sleepgraph.py", line 6181, in processData
testruns, error = parseTraceLog(live)
File "../sleepgraph.py", line 3470, in parseTraceLog
tp, tf = loadTraceLog()
File "../sleepgraph.py", line 3398, in loadTraceLog
if tp.stampInfo(line, sysvals):
File "../sleepgraph.py", line 3073, in stampInfo
self.parsePlatformInfo(line, sv)
File "../sleepgraph.py", line 3177, in parsePlatformInfo
sv.devprops = self.devprops(sv.b64unzip(info))
File "../sleepgraph.py", line 3158, in devprops
if int(f[2]):
ValueError: invalid literal for int() with base 10: ''
To prevent this crash, add proper validation before accessing.
Signed-off-by: Gongwei Li <ligongwei@kylinos.cn>
Acked-by: Todd Brandt <todd.e.brandt@intel.com>
[ rjw: Subject tweak ]
Link: https://patch.msgid.link/20260424071208.3610628-1-13875017792@163.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
corsairpsu_probe() opens the HID device before sending the device init
and firmware-info commands. If either command fails, the error path jumps
directly to fail_and_stop and skips hid_hw_close().
Use the existing fail_and_close label for those post-open failures so the
open count and low-level close callback are balanced before hid_hw_stop().
Fixes: d115b51e0e ("hwmon: add Corsair PSU HID controller driver")
Cc: stable@vger.kernel.org
Signed-off-by: Myeonghun Pak <mhun512@gmail.com>
Reviewed-by: Wilken Gottwalt <wilken.gottwalt@posteo.net>
Link: https://lore.kernel.org/r/20260424135107.13720-1-mhun512@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
kconfiglint reports:
X001: CONFIG_SENSORS_SBRMI referenced in Makefile but not defined
in any Kconfig
The SB-RMI hardware monitoring driver was originally introduced in
commit 5a0f50d110 ("hwmon: Add support for SB-RMI power module") with
both a Kconfig entry (CONFIG_SENSORS_SBRMI) and a Makefile line
(obj-$(CONFIG_SENSORS_SBRMI) += sbrmi.o) in drivers/hwmon/.
Commit e156586764 ("hwmon/misc: amd-sbi: Move core sbrmi from hwmon to
misc")
moved the driver to drivers/misc/amd-sbi/ to support additional
functionality beyond hardware monitoring. That commit correctly removed the
Kconfig entry from drivers/hwmon/Kconfig, moved the source file
drivers/hwmon/sbrmi.c to drivers/misc/amd-sbi/sbrmi.c, and created new
Kconfig/Makefile entries in drivers/misc/amd-sbi/ with a renamed symbol
(CONFIG_AMD_SBRMI_I2C).
However, the Makefile line in drivers/hwmon/Makefile was not removed in
that commit. The orphaned line references a CONFIG symbol that no longer
exists and a source file that is no longer present, so it has no effect
on the build — but it is dead code that should be cleaned up.
Remove the stale Makefile reference.
Assisted-by: Claude:claude-opus-4-6 kconfiglint
Signed-off-by: Sasha Levin <sashal@kernel.org>
Link: https://lore.kernel.org/r/20260426000319.55908-1-sashal@kernel.org
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
The ideapad-laptop.c file now exists inside drivers/platform/x86/lenovo/
directory. Updating the GitHub link to the correct path.
Signed-off-by: Ninad Naik <ninadnaik07@gmail.com>
Link: https://lore.kernel.org/r/20260417191411.713958-1-ninadnaik07@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
ltc2992_get_power() computes the divisor for mul_u64_u32_div() as
r_sense_uohm * 1000. This multiplication overflows u32 when
r_sense_uohm exceeds about 4.29 ohms (4294967 micro-ohms), producing
a truncated divisor and an incorrect power reading.
Cancel the factor of 1000 from both the numerator
(VADC_UV_LSB * IADC_NANOV_LSB = 312500000) and the divisor
(r_sense_uohm * 1000), giving (VADC_UV_LSB / 1000) * IADC_NANOV_LSB
= 312500 as the numerator and plain r_sense_uohm as the divisor.
The cancellation is exact because LTC2992_VADC_UV_LSB (25000) is
divisible by 1000.
This is the read-path counterpart of the write-path fix applied in
the preceding patch.
Fixes: b0bd407e94 ("hwmon: (ltc2992) Add support")
Cc: stable@vger.kernel.org
Signed-off-by: Sanman Pradhan <psanman@juniper.net>
Link: https://lore.kernel.org/r/20260416215904.101969-3-sanman.pradhan@hpe.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
ltc2992_set_voltage(), ltc2992_set_current(), and ltc2992_set_power()
do not validate the user-supplied value before converting it to a
register value. This can result in:
1. Negative input values wrapping to large positive register values.
For power, the negative long is implicitly cast to u64 in
mul_u64_u32_div(), producing an incorrect value. For voltage and
current, the negative converted value wraps when passed to
ltc2992_write_reg() as a u32.
2. Intermediate arithmetic exceeding the range representable in u64 on
64-bit platforms. In ltc2992_set_voltage(), (u64)val * 1000 can
exceed U64_MAX when val is a large positive long. In
ltc2992_set_current(), (u64)val * r_sense_uohm can overflow
similarly. In ltc2992_set_power(), the computed value may not fit
in u64.
3. Register values exceeding the hardware field width. Voltage and
current threshold registers are 12-bit (stored left-justified in
16 bits), and power threshold registers are 24-bit. Without
clamping, bits above the field width are truncated in
ltc2992_write_reg().
Fix by clamping negative values to zero, clamping positive values to
the rounded hardware-representable maximum (the value returned by the
read path for a full-scale register) to prevent intermediate overflow,
and clamping the converted register value to the hardware field width
before writing. The existing conversion formula and rounding behavior
are preserved.
In the power write path, cancel the factor of 1000 from both the
numerator (r_sense_uohm * 1000) and the denominator
(VADC_UV_LSB * IADC_NANOV_LSB) to also eliminate a u32 overflow of
r_sense_uohm * 1000 when r_sense_uohm exceeds about 4.29 ohms.
Fixes: b0bd407e94 ("hwmon: (ltc2992) Add support")
Cc: stable@vger.kernel.org
Signed-off-by: Sanman Pradhan <psanman@juniper.net>
Link: https://lore.kernel.org/r/20260416215904.101969-2-sanman.pradhan@hpe.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
The PAI crypto counter design allows for user space and kernel space
PAI counter increment recording. This is achieved by splitting the
recording page in half. The upper part of the 4KB page records user
space increments of PAI crypto counter and the lower half records
kernel space increments. The page itself looks like:
lowcore ptr ---> ++++++++++++++++++++++++
|user space area |
+----------------------+
|kernel space area |
++++++++++++++++++++++++
User space and kernel space entries are handled via a kernel_offset
value when wrting. For PAI crypto counters this offset is 2048 or
half of a page size.
For PAI NNPA counter design this distinction was not needed. There is
no user and kernel space part for the page pointed to by lowcore.
The set up is:
lowcore ptr ---> ++++++++++++++++++++++++
|user + kernel space |
|area |
| |
++++++++++++++++++++++++
There is always only one counter value recorded and saved.
Depending on number of CPUs and machine load, the number of PAI NNPA
counter increment differs between counting (perf stat) and recording
(perf record). The number reported by sampling was double the number
shown by counting.
This was caused by a double read of the PAI NNPA values in function
pai_copy(). The first part of that function reads the kernel space part.
The offset into the kernel page part must be larger than zero.
The second part of that function reads the user space part, which
begins of offset zero. This works fine for PAI crypto counters.
It fails for PAI NNPA counters because the PMU device driver does
not support that feature and has a kernel_offset value of 0x0.
Executing both user and kernel space read out might end up reading
user space value twice.
For the PAI NNPA PMU prohibit the kernel space part read out.
Cc: stable@vger.kernel.org
Fixes: f124735413 ("s390/pai_crypto: Rename paicrypt_copy() to pai_copy()")
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Reviewed-by: Sumanth Korikkar <sumanthk@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Check for headroom and call skb_expand_head() like in the IP output
path to ensure there is sufficient headroom for the mac header when
forwarding this packet as suggested by sashiko.
Fixes: b5964aac51 ("netfilter: flowtable: consolidate xmit path")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Multiple targets and matches relies on L4 header to operate. For
fragmented packets, every fragment carries the transport protocol
identifier, but only the first fragment contains the L4 header.
As the 'raw' table can be configured to run at priority -450 (before
defragmentation at -400), the target/match can be reached before
reassembly. In this case, non-first fragments have their payload
incorrectly parsed as a TCP/UDP header. This would be of course a
misconfiguration scenario. In most of the cases this just lead to a
unreliable behavior for fragmented traffic.
Add a fragment check to ensure target/match only evaluates unfragmented
packets or the first fragment in the stream.
Fixes: 902d6a4c2a ("netfilter: nf_defrag: Skip defrag if NOTRACK is set")
Signed-off-by: Fernando Fernandez Mancera <fmancera@suse.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
The tproxy, osf and exthdr (SCTP) expressions rely on the presence of
transport layer headers to perform socket lookups, fingerprint matching,
or chunk extraction. For fragmented packets, while the IP protocol
remains constant across all fragments, only the first fragment contains
the actual L4 header.
The expressions could be attached to a chain with a priority lower than
-400, bypassing defragmentation. Or could be used in stateless
environments where defragmentation is not happening at all. This could
result in garbage data being used for the matching.
Add a check for pkt->fragoff so only unfragmented packets or the first
fragment is processed.
Fixes: 133dc203d7 ("netfilter: nft_exthdr: Support SCTP chunks")
Fixes: 4ed8eb6570 ("netfilter: nf_tables: Add native tproxy support")
Fixes: b96af92d6e ("netfilter: nf_tables: implement Passive OS fingerprint module in nft_osf")
Signed-off-by: Fernando Fernandez Mancera <fmancera@suse.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Both nft_socket and xt_socket relies on L4 headers to perform socket
lookup in the slow path. For fragmented packets, while the IP protocol
remains constant across all fragments, only the first fragment contains
the actual L4 header.
As the expression/match could be attached to a chain with a priority
lower than -400, it could bypass defragmentation.
Add a check for fragmentation in the lookup functions directly so the
problem is handled for both nft_socket and xt_socket at the same time.
In addition, future users of the functions would not need to care about
this.
Fixes: 902d6a4c2a ("netfilter: nf_defrag: Skip defrag if NOTRACK is set")
Fixes: 554ced0a6e ("netfilter: nf_tables: add support for native socket matching")
Signed-off-by: Fernando Fernandez Mancera <fmancera@suse.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
- Fix a reference leak on device_register() failure in pata_parport
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRN+ES/c4tHlMch3DzJZDGjmcZNcgUCafNROAAKCRDJZDGjmcZN
cnFfAQD+x6vRvu0bpGab9J7gvZYYtbbsj12pCbVA9jPpS2AMXQEA/ity23nuogu4
vF+H+XKqSjfdRGhn5GZ9GMhIq4tNOQ4=
=0MCi
-----END PGP SIGNATURE-----
Merge tag 'ata-7.1-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/libata/linux
Pull ata fix from Niklas Cassel:
- Fix a reference leak on device_register() failure in pata_parport
* tag 'ata-7.1-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/libata/linux:
ata: pata_parport: switch to dynamic root device
A bunch of small fixes. One minor fix is found in the core side for
data race in PCM OSS layer, while remaining changes are various
device-specific fixes and quirks.
- Core: PCM OSS data race fix
- HD-audio: Fixes for TAS2781, CS35L56, and Realtek/Conexant quirks;
avoidance of a WARN_ON for HDMI channel mapping
- USB-audio: Improvements in UAC3 parsing robustness (leaks, size
checks) and fixes for potential endless loops
- ASoC: Driver-specific fixes for CS35L56, Intel bytcr_wm5102,
Spacemit, AW88395, and others, plus a new quirk for Steam Deck OLED.
- Misc: A UAF fix in aloop driver, division by zero fix in ua101
driver and leak fixes in caiaq driver
-----BEGIN PGP SIGNATURE-----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=SGI0
-----END PGP SIGNATURE-----
Merge tag 'sound-7.1-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"A bunch of small fixes. One minor fix is found in the core side for
data race in PCM OSS layer, while remaining changes are various
device-specific fixes and quirks.
- Core: PCM OSS data race fix
- HD-audio: Fixes for TAS2781, CS35L56, and Realtek/Conexant quirks;
avoidance of a WARN_ON for HDMI channel mapping
- USB-audio: Improvements in UAC3 parsing robustness (leaks, size
checks) and fixes for potential endless loops
- ASoC: Driver-specific fixes for CS35L56, Intel bytcr_wm5102,
Spacemit, AW88395, and others, plus a new quirk for Steam Deck
OLED
- Misc: A UAF fix in aloop driver, division by zero fix in ua101
driver and leak fixes in caiaq driver"
* tag 'sound-7.1-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (32 commits)
ALSA: hda/tas2781: Fix incorrect bit update for non-book-zero or book 0 pages >1
ALSA: hda: cs35l56: Fix uninitialized value in cs35l56_hda_read_acpi()
ALSA: hda/conexant: Fix missing error check for jack detection
ALSA: hda: Avoid WARN_ON() for HDMI chmap slot checks
ALSA: usb-audio: Fix quirk entry placement for PreSonus AudioBox USB
ASoC: spacemit: adjust FIFO trigger threshold to half FIFO size
ASoC: spacemit: move hw constraints from hw_params to startup
ASoC: codecs: ab8500: Fix casting of private data
ASoC: cs35l56: Fix illegal writes to OTP_MEM registers
ASoC: Intel: bytcr_wm5102: Fix MCLK leak on platform_clock_control error
ALSA: usb-audio: Avoid potential endless loop in convert_chmap_v3()
ALSA: usb-audio: Fix potential leak of pd at parsing UAC3 streams
ALSA: caiaq: Don't abort when no input device is available
ALSA: caiaq: Fix potentially leftover ep1_in_urb at error path
ASoC: aw88395: Fix kernel panic caused by invalid GPIO error pointer
ALSA: caiaq: fix usb_dev refcount leak on probe failure
sound: ua101: fix division by zero at probe
ALSA: usb-audio: apply quirk for Playstation PDP Riffmaster
ALSA: hda: Remove duplicate cmedia entries in codecs Makefile
ALSA: hda/realtek: Add micmute LED quirk for Acer Aspire A315-44P
...
Some subsystems enable -Wmaybe-uninitialized [1], which can trigger
false positives when KCSAN is enabled. Specifically, passing an
uninitialized variable to functions that instrument accesses (e.g.,
copy_from_user()) results in calls to __kcsan_check_access().
Because __kcsan_check_access() takes a `const volatile void *ptr`, GCC
infers that the function may only read the memory location, and thus
warns if the passed variable is uninitialized.
However, KCSAN is a dynamic analysis tool for data race detection; while
it does read the memory location to detect concurrent modifications, the
"initialized'ness" of the memory location is irrelevant for its analysis.
Use absolute_pointer() in __kcsan_check_write(), kcsan_check_write(),
and kcsan_check_atomic_write() to hide the pointer from the compiler,
preventing it from concluding that the pointer passed points to
uninitialized memory.
This fixes warnings like:
| CC fs/ntfs3/file.o
| In file included from include/asm-generic/rwonce.h:27,
| from arch/arm64/include/asm/rwonce.h:81,
| from include/linux/compiler.h:369,
| from include/linux/array_size.h:5,
| from include/linux/kernel.h:16,
| from include/linux/backing-dev.h:12,
| from fs/ntfs3/file.c:10:
| In function 'instrument_copy_from_user_before',
| inlined from '_inline_copy_from_user' at include/linux/uaccess.h:184:2,
| inlined from 'copy_from_user' at include/linux/uaccess.h:221:9,
| inlined from 'ntfs_ioctl_fitrim' at fs/ntfs3/file.c:77:6,
| inlined from 'ntfs_ioctl' at fs/ntfs3/file.c:164:10:
| include/linux/kcsan-checks.h:220:28: error: 'range' may be used uninitialized [-Werror=maybe-uninitialized]
| 220 | #define kcsan_check_access __kcsan_check_access
| | ^
| include/linux/kcsan-checks.h:311:9: note: in expansion of macro 'kcsan_check_access'
| 311 | kcsan_check_access(ptr, size, KCSAN_ACCESS_WRITE)
| | ^~~~~~~~~~~~~~~~~~
| include/linux/instrumented.h:147:9: note: in expansion of macro 'kcsan_check_write'
| 147 | kcsan_check_write(to, n);
| | ^~~~~~~~~~~~~~~~~
| include/linux/kcsan-checks.h: In function 'ntfs_ioctl':
| include/linux/kcsan-checks.h:37:6: note: by argument 1 of type 'const volatile void *' to '__kcsan_check_access' declared here
| 37 | void __kcsan_check_access(const volatile void *ptr, size_t size, int type);
| | ^~~~~~~~~~~~~~~~~~~~
| fs/ntfs3/file.c:65:29: note: 'range' declared here
| 65 | struct fstrim_range range;
| | ^~~~~
Link: https://lore.kernel.org/all/5da10cca-875b-418d-b54e-6be3ea32c266@app.fastmail.com/ [1]
Reported-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Tested-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Marco Elver <elver@google.com>
The Xiaomi Mi Laptop Pro 15 (TM1905, subsystem 1d72:1905) ships with the
Realtek ALC256 codec on Intel Comet Lake PCH-LP. After S3 resume the
codec sets coefficient register 0x10 to 0x0220 instead of 0x0020 — bit 9
is erroneously set, which silences the internal speaker. Bluetooth and
HDMI audio are unaffected because they use different paths.
This is the same mechanism fixed for Clevo NJ51CU by commit edca7cc4b0
("ALSA: hda/realtek: Fix quirk for Clevo NJ51CU"), but the existing
ALC256_FIXUP_MIC_NO_PRESENCE_AND_RESUME also reconfigures pin 0x19 as a
front mic, which is wrong for this Xiaomi where pin 0x19 default is
0x411111f0 (disabled). Add a minimal fixup that only clears the stuck
coef bit, and add the Xiaomi SSID to the quirk table.
Verified by reading coef 0x10 with hda-verb after resume (returns
0x0220), writing 0x0020, and confirming the internal speaker resumes
output. With this fixup applied the bit is cleared on every codec init,
including post-resume.
Signed-off-by: Yuriy Padlyak <yuriypadlyak@gmail.com>
Cc: <stable@vger.kernel.org>
Tested-by: Yuriy Padlyak <yuriypadlyak@gmail.com>
Link: https://patch.msgid.link/20260429220903.14918-1-yuriypadlyak@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Currently, get_non_dying_memcg_start() and get_non_dying_memcg_end() both
evaluate cgroup_subsys_on_dfl(memory_cgrp_subsys) independently to
determine whether to acquire or release the RCU read lock.
However, the result of cgroup_subsys_on_dfl() can change dynamically at
runtime due to cgroup hierarchy rebinding (e.g., when the memory
controller is moved between cgroup v1 and v2 hierarchies). This can cause
the following warning:
=====================================
WARNING: bad unlock balance detected!
7.0.0-next-20260420+ #83 Tainted: G W
-------------------------------------
memcg-repro/270 is trying to release lock (rcu_read_lock) at:
[<ffffffff815f57f7>] rcu_read_unlock+0x17/0x60
but there are no more locks to release!
other info that might help us debug this:
1 lock held by memcg-repro/270:
#0: ffff888102fa2088 (vm_lock){++++}-{0:0}, at: do_user_addr_fault+0x285/0x880
stack backtrace:
CPU: 0 UID: 0 PID: 270 Comm: memcg-repro Tainted: G W 7.0.0-next-20260420+ #
Tainted: [W]=WARN
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.12.0-1 04/01/2014
Call Trace:
<TASK>
? rcu_read_unlock+0x17/0x60
dump_stack_lvl+0x77/0xb0
print_unlock_imbalance_bug+0xe0/0xf0
? rcu_read_unlock+0x17/0x60
lock_release+0x21d/0x2a0
rcu_read_unlock+0x1c/0x60
do_pte_missing+0x233/0xb40
__handle_mm_fault+0x80e/0xcd0
handle_mm_fault+0x146/0x310
do_user_addr_fault+0x303/0x880
exc_page_fault+0x9b/0x270
asm_exc_page_fault+0x26/0x30
RIP: 0033:0x5590e4eb41ea
Code: 61 cc 66 0f 6f e0 66 0f 61 c2 66 0f db cd 66 0f 69 e2 66 0f 6f d0 66 0f 69 d4 66 0f 61 0
RSP: 002b:00007ffcad25f030 EFLAGS: 00010202
RAX: 00005590e4eb8010 RBX: 00007ffcad260f7d RCX: 00007f73c474d44d
RDX: 00005590e4eb80a0 RSI: 00005590e4eb503c RDI: 000000000000000f
RBP: 00005590e4eb70a0 R08: 0000000000000000 R09: 00007f73c483a680
R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000
R13: 00007ffcad25f180 R14: 00005590e4eb6dd8 R15: 00007f73c4869020
</TASK>
------------[ cut here ]------------
Fix this by explicitly tracking the RCU lock state, ensuring that
rcu_read_unlock() in get_non_dying_memcg_end() is strictly paired with the
lock acquisition, regardless of any runtime rebinding events.
Link: https://lore.kernel.org/20260429073105.44472-1-qi.zheng@linux.dev
Fixes: 8285917d6f ("mm: memcontrol: prepare for reparenting non-hierarchical stats")
Signed-off-by: Qi Zheng <zhengqi.arch@bytedance.com>
Acked-by: Shakeel Butt <shakeel.butt@linux.dev>
Reviewed-by: Muchun Song <muchun.song@linux.dev>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Qi Zheng <zhengqi.arch@bytedance.com>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The DEFER_TASKRUN local task work paths all run under ctx->uring_lock,
which serializes them with each other and with the rest of the ring's
hot paths. io_move_task_work_from_local() is the exception - it's called
from io_ring_exit_work() on a kworker without holding the lock and from
the iopoll cancelation side right after dropping it.
->work_llist is fine with this, as it's only ever updated via the
expected paths. But the ->retry_llist is updated while runing, and hence
it could potentially race between normal task_work running and the
task-has-exited shutdown path.
Simply grab ->uring_lock while moving the local work to the fallback
list for exit purposes, which nicely serializes it across both the
normal additions and the exit prune path.
Cc: stable@vger.kernel.org
Fixes: f46b9cdb22 ("io_uring: limit local tw done")
Reported-by: Robert Femmer <robert.femmer@x41-dsec.de>
Reported-by: Christian Reitter <invd@inhq.net>
Reported-by: Michael Rodler <michael.rodler@x41-dsec.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
When the flag relax_fan_constraint is set, local variable 'raw'
is never assigned, and lwmi_om_hwmon_write() will pass uninitialized
value to lwmi_om_fan_get_set() resulting in undefined behavior.
This flag allows user to bypass minimum fan RPM divisor rounding,
but assignment to 'raw' only happens in the non-relaxed path.
Fix by defaulting 'raw' to user provided 'val' in the else branch.
Fixes: 51ed34282f ("platform/x86: lenovo-wmi-other: Add HWMON for fan reporting/tuning")
Reviewed-by: Rong Zhang <i@rong.moe>
Signed-off-by: Yufei CHENG <cd345al@gmail.com>
Link: https://patch.msgid.link/20260426165034.9073-1-cd345al@gmail.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
The HP Omen Max 16-ah0xxx, DMI board ID 8D41 is currently marked with
victus_s_thermal_params in the victus_s_thermal_profile_boards[] list.
This disables thermal profile readback and adds a dmesg warning during
driver init for "unknown board".
After testing we know that (similar to another HP Omen Max 16 device,
board ID 8D87), the embedded controller on this board does not expose
thermal profile which means we have to intentionally disable EC
readback.
Changing its driver_data to omen_v1_no_ec_thermal_params is sufficient
to silence the warning.
Tested-by: Benjamin Y <hectare.plains1h@icloud.com>
Signed-off-by: Krishna Chomal <krishna.chomal108@gmail.com>
Link: https://patch.msgid.link/20260429180953.129885-1-krishna.chomal108@gmail.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
After calling wmidev_evaluate_method(), if the ACPI core does not return
an out object, then wmidev_invoke_method() bypasses the min_size check
and returns 0. Add a check for min_size if there is not an out object.
Fixes: 1aeded2f55 ("platform/wmi: Extend wmidev_query_block() to reject undersized data")
Closes: https://sashiko.dev/#/patchset/20260406203237.2970-1-W_Armin%40gmx.de
Signed-off-by: Kurt Borja <kuurtb@gmail.com>
Reviewed-by: Armin Wolf <W_Armin@gmx.de>
Link: https://patch.msgid.link/20260429-invoke-fix-v1-1-ce938eb80cd3@gmail.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Prevent re-exporting of imported GEM buffers by adding a custom
prime_handle_to_fd callback that checks if the object is imported
and returns -EOPNOTSUPP if so.
Re-exporting imported GEM buffers causes loss of buffer flags settings,
leading to incorrect device access and data corruption.
Reported-by: Yametsu <yam3tsu@gmail.com>
Fixes: 57557964b5 ("accel/ivpu: Add support for userptr buffer objects")
Reviewed-by: Andrzej Kacprowski <andrzej.kacprowski@linux.intel.com>
Signed-off-by: Karol Wachowski <karol.wachowski@linux.intel.com>
Cc: <stable@vger.kernel.org> # v6.19+
Return -EIO if efx_mcdi_rpc() doesn't return enough space.
Fixes: 14743ddd24 ("sfc: add devlink info support for ef100")
Signed-off-by: Dan Carpenter <error27@gmail.com>
Reviewed-by: Edward Cree <ecree.xilinx@gmail.com>
Link: https://patch.msgid.link/afGpsbLRHL4_H0KS@stanley.mountain
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
When tls_set_device_offload_rx() fails at tls_dev_add(), the error path
calls tls_sw_free_resources_rx() to clean up the SW context that was
initialized by tls_set_sw_offload(). This function calls
tls_sw_release_resources_rx() (which stops the strparser via
tls_strp_stop()) and tls_sw_free_ctx_rx() (which kfrees the context),
but never frees the anchor skb that was allocated by alloc_skb(0) in
tls_strp_init().
Note that tls_sw_free_resources_rx() is exclusively used for this
"failed to start offload" code path, there's no other caller.
The leak did not exist before commit 84c61fe1a7 ("tls: rx: do not use
the standard strparser"), because the standard strparser doesn't try
to pre-allocate an skb.
The normal close path in tls_sk_proto_close() handles cleanup by calling
tls_sw_strparser_done() (which calls tls_strp_done()) after dropping
the socket lock, because tls_strp_done() does cancel_work_sync() and
the strparser work handler takes the socket lock.
Fixes: 84c61fe1a7 ("tls: rx: do not use the standard strparser")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Link: https://patch.msgid.link/20260428231559.1358502-1-kuba@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Various names for Qualcomm as a company are used in user-visible config
options: QCOM, Qualcomm and Qualcomm Technologies.
Switch to unified "Qualcomm" so it will be easier for users to identify the
options when for example running menuconfig.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Link: https://patch.msgid.link/20260427070121.18422-2-krzysztof.kozlowski@oss.qualcomm.com
While the GCC and Clang compilers already define __ASSEMBLER__
automatically when compiling assembly code, __ASSEMBLY__ is a macro that
only gets defined by the Makefiles in the kernel.
This can be very confusing when switching between userspace and kernelspace
coding, or when dealing with uapi headers that rather should use
__ASSEMBLER__ instead.
Standardize now on the __ASSEMBLER__ macro that is provided by the
compilers.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Link: https://patch.msgid.link/20260421113012.146528-1-thuth@redhat.com
Add irq_set_type() callback to support configuring interrupt trigger types
(level high/low, edge rising/falling) for the JHB100 interrupt controller.
Also add irq_ack() callback as required by handle_edge_irq().
Signed-off-by: Changhuang Liang <changhuang.liang@starfivetech.com>
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Link: https://patch.msgid.link/20260416064751.632138-6-changhuang.liang@starfivetech.com
StarFive JHB100 SoC interrupt controller actually supports 64 interrupt
sources, the original code only supported up to 32. now it is extended to 64.
Also use guard(raw_spinlock) to automatically release spinlocks.
Signed-off-by: Mason Huo <mason.huo@starfivetech.com>
Signed-off-by: Changhuang Liang <changhuang.liang@starfivetech.com>
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Link: https://patch.msgid.link/20260416064751.632138-5-changhuang.liang@starfivetech.com
Use devm_ interfaces to simplify resource release. Make clock and reset get
optional as they are not used on the JHB100 SoC. Replace pr_ logging with
dev_* logging. Use __free(kfree) cleanup attribute to auto-free irqc on
error paths
Signed-off-by: Changhuang Liang <changhuang.liang@starfivetech.com>
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Link: https://patch.msgid.link/20260416064751.632138-4-changhuang.liang@starfivetech.com
The StarFive JH8100 SoC was discontinued before production. The newly
taped-out JHB100 SoC uses the same interrupt controller IP. Rename the
driver file, Kconfig symbol, and internal references from "jh8100" to
"jhb100" to accurately reflect the supported hardware.
Signed-off-by: Changhuang Liang <changhuang.liang@starfivetech.com>
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Link: https://patch.msgid.link/20260416064751.632138-3-changhuang.liang@starfivetech.com
The StarFive JH8100 SoC was discontinued before production. The newly
taped-out JHB100 SoC uses the same interrupt controller IP.
Rename the binding file, compatible string, and MAINTAINERS entry from
"jh8100" to "jhb100". In JHB100 SoC, The clocks and resets are not operated
by users, but they exist in the hardware. Mark them as optional.
Signed-off-by: Changhuang Liang <changhuang.liang@starfivetech.com>
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://patch.msgid.link/20260416064751.632138-2-changhuang.liang@starfivetech.com
The existing AST2700 interrupt controller driver ("aspeed,ast2700-intc-ic")
was written against the A0 pre-production design.
From A1 onwards (retained in the A2 production silicon), the interrupt
fabric was re-architected: interrupt routing is programmable and interrupt
outputs can be directed to multiple upstream controllers (PSP GIC,
Secondary Service Processor (SSP) NVIC, Tertiary Service Processor (TSP)
NVIC, and Boot MCU interrupt controller). This design requires route
resolution and a controller hierarchy model which the A0 driver cannot
represent.
Remove driver support for A0 in favour of the driver for the A2 production
design.
Signed-off-by: Ryan Chen <ryan_chen@aspeedtech.com>
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Link: https://patch.msgid.link/20260407-irqchip-v5-4-c0b0a300a057@aspeedtech.com
Add a KUnit suite for aspeed_intc0_resolve_route().
Cover invalid arguments, invalid domain/range data, connected and
disconnected mappings, and malformed upstream range cases.
Signed-off-by: Ryan Chen <ryan_chen@aspeedtech.com>
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Link: https://patch.msgid.link/20260407-irqchip-v5-3-c0b0a300a057@aspeedtech.com
The AST2700 interrupt fabric is shared by multiple integrated processors
(PSP/SSP/TSP/BootMCU), each with its own interrupt controller and its own
devicetree view of the system. As a result, interrupt routing cannot be
treated as fixed: the valid route for a peripheral interrupt depends on
which processor is consuming it.
The INTC0 driver models this by creating a hierarchical irqdomain under
the upstream interrupt controller selected by the interrupt-parent
property in the devicetree. Information derived from this relationship
is incorporated into the route resolution logic for the controller.
The INTC1 driver implements the banked INTM-fed controller and forwards
interrupts toward INTC0, without embedding assumptions about the final
destination processor.
Signed-off-by: Ryan Chen <ryan_chen@aspeedtech.com>
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Link: https://patch.msgid.link/20260407-irqchip-v5-2-c0b0a300a057@aspeedtech.com
Introduce a new binding describing the AST2700 interrupt controller
architecture implemented in the A2 production silicon.
The AST2700 SoC has undergone multiple silicon revisions (A0, A1, A2)
prior to mass production. The interrupt architecture was substantially
reworked after the A0 revision for A1, and the A1 design is retained
unchanged in the A2 production silicon.
The existing AST2700 interrupt controller binding ("aspeed,ast2700-intc-ic")
was written against the pre-production A0 design.
That binding does not accurately describe the interrupt hierarchy and
routing model present in A1/A2, where interrupts can be routed to multiple
processor-local interrupt controllers (Primary Service Processor (PSP) GIC,
Secondary Service Processor (SSP)/Tertiary Service Processor (TSP) NVICs,
and BootMCU APLIC) depending on the execution context.
Remove the binding for the pre-production A0 design in favour of the
binding for the A2 production design. There is no significant user
impact from the removal as there are no existing devicetrees in any
of Linux, u-boot or Zephyr that make use of the A0 binding.
Hardware connectivity between interrupt controllers is expressed using
the aspeed,interrupt-ranges property.
Signed-off-by: Ryan Chen <ryan_chen@aspeedtech.com>
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://patch.msgid.link/20260407-irqchip-v5-1-c0b0a300a057@aspeedtech.com
Jacob Keller says:
====================
Intel Wired LAN Update 2026-04-27 (ice, iavf)
Petr Oros from RedHat has accumulated a number of fixes for the Intel ice
and iavf drivers, bundled together in this series.
First, a series of 4 fixes to resolve issues with the iavf driver logic for
handling VLAN filters. This includes keeping VLAN filters while the
interface is brought down, waiting for confirmation on filter deletion
before deleting filters from the driver tracking structures, and handling
the VIRTCHNL_OP_ADD_VLAN for the old v1 VLAN_ADD command.
A fix for a crash in ice_reset_all_vfs(), properly checking for errors when
ice_vf_rebuild_vsi() fails.
A fix for a possible infinite recursion in ice_cfg_tx_topo() that occurs
when trying to apply invalid Tx topology configuration.
A fix to initialize the SMA pins in the DPLL subsystem properly.
A fix to change the SMA and U.FL pin state for paired pins, ensuring that
all flows changing one pin will also update its shared pin appropriately.
A preparatory patch to export __dpll_pin_change_ntf() so that drivers can
notify pin changes while already holding the dpll_lock.
A fix to ensure DPLL notifications are sent for the software-controlled
pins which wrap the physical CGU input/output pins.
A fix to add DPLL notifications for peer pins when changing the SMA or U.FL
pins, ensuring DPLL subsystem is notified about the paired connected pins.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
====================
Link: https://patch.msgid.link/20260427-jk-iwl-net-petr-oros-fixes-v1-0-cdcb48303fd8@intel.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
SMA and U.FL pins share physical signal paths in pairs (SMA1/U.FL1 and
SMA2/U.FL2). When one pin's state changes via a PCA9575 GPIO write,
the paired pin's state also changes, but no notification is sent for
the peer pin. Userspace consumers monitoring the peer via dpll netlink
subscribe never learn about the update.
Add ice_dpll_sw_pin_notify_peer() which sends a change notification for
the paired SW pin. Call it from ice_dpll_pin_sma_direction_set(),
ice_dpll_sma_pin_state_set(), and ice_dpll_ufl_pin_state_set() after
pf->dplls.lock is released. Use __dpll_pin_change_ntf() because
dpll_lock is still held by the dpll netlink layer (dpll_pin_pre_doit).
Fixes: 2dd5d03c77 ("ice: redesign dpll sma/u.fl pins control")
Signed-off-by: Petr Oros <poros@redhat.com>
Tested-by: Alexander Nowlin <alexander.nowlin@intel.com>
Reviewed-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20260427-jk-iwl-net-petr-oros-fixes-v1-11-cdcb48303fd8@intel.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The SMA/U.FL pin redesign (commit 2dd5d03c77 ("ice: redesign dpll
sma/u.fl pins control")) introduced software-controlled pins that wrap
backing CGU input/output pins, but never updated the notification and
data paths to propagate pin events to these SW wrappers.
The periodic work sends dpll_pin_change_ntf() only for direct CGU input
pins. SW pins that wrap these inputs never receive change or phase
offset notifications, so userspace consumers such as synce4l monitoring
SMA pins via dpll netlink never learn about state transitions or phase
offset updates. Similarly, ice_dpll_phase_offset_get() reads the SW
pin's own phase_offset field which is never updated; the PPS monitor
writes to the backing CGU input's field instead.
Fix by introducing ice_dpll_pin_ntf(), a wrapper around
dpll_pin_change_ntf() that also notifies any registered SMA/U.FL pin
whose backing CGU input matches. Replace all direct
dpll_pin_change_ntf() calls in the periodic notification paths with
this wrapper. Fix ice_dpll_phase_offset_get() to return the backing
CGU input's phase_offset for input-direction SW pins.
Fixes: 2dd5d03c77 ("ice: redesign dpll sma/u.fl pins control")
Signed-off-by: Petr Oros <poros@redhat.com>
Tested-by: Alexander Nowlin <alexander.nowlin@intel.com>
Reviewed-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Reviewed-by: Ivan Vecera <ivecera@redhat.com>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20260427-jk-iwl-net-petr-oros-fixes-v1-10-cdcb48303fd8@intel.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Export __dpll_pin_change_ntf() so that drivers can send pin change
notifications from within pin callbacks, which are already called
under dpll_lock. Using dpll_pin_change_ntf() in that context would
deadlock.
Add lockdep_assert_held() to catch misuse without the lock held.
Acked-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Signed-off-by: Ivan Vecera <ivecera@redhat.com>
Signed-off-by: Petr Oros <poros@redhat.com>
Tested-by: Alexander Nowlin <alexander.nowlin@intel.com>
Reviewed-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20260427-jk-iwl-net-petr-oros-fixes-v1-9-cdcb48303fd8@intel.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
SMA and U.FL pins share physical signal paths in pairs (SMA1/U.FL1 and
SMA2/U.FL2) controlled by the PCA9575 GPIO expander. Each pair can
only have one active pin at a time: SMA1 output and U.FL1 output share
the same CGU output, SMA2 input and U.FL2 input share the same CGU
input. The PCA9575 register bits determine which connector in each
pair owns the signal path.
The driver does not account for this pairing in two places:
ice_dpll_ufl_pin_state_set() modifies PCA9575 bits and disables the
backing CGU pin without checking whether the U.FL pin is currently
active. Disconnecting an already inactive U.FL pin flips bits that
the paired SMA pin relies on, breaking its connection.
ice_dpll_sma_direction_set() does not propagate direction changes to
the paired U.FL pin. For SMA2/U.FL2 the ICE_SMA2_UFL2_RX_DIS bit is
never managed, so U.FL2 stays disconnected after SMA2 switches to
output. For both pairs the backing CGU pin of the U.FL side is never
enabled when a direction change activates it, so userspace sees the
pin as disconnected even though the routing is correct.
Fix by guarding the U.FL disconnect path against inactive pins and by
updating the paired U.FL pin fully on SMA direction changes: manage
ICE_SMA2_UFL2_RX_DIS for the SMA2/U.FL2 pair and enable the backing
CGU pin whenever the peer becomes active.
Fixes: 2dd5d03c77 ("ice: redesign dpll sma/u.fl pins control")
Signed-off-by: Petr Oros <poros@redhat.com>
Tested-by: Alexander Nowlin <alexander.nowlin@intel.com>
Reviewed-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20260427-jk-iwl-net-petr-oros-fixes-v1-8-cdcb48303fd8@intel.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The DPLL SMA/U.FL pin redesign introduced ice_dpll_sw_pin_frequency_get()
which gates frequency reporting on the pin's active flag. This flag is
determined by ice_dpll_sw_pins_update() from the PCA9575 GPIO expander
state. Before the redesign, SMA pins were exposed as direct HW
input/output pins and ice_dpll_frequency_get() returned the CGU
frequency unconditionally — the PCA9575 state was never consulted.
The PCA9575 powers on with all outputs high, setting ICE_SMA1_DIR_EN,
ICE_SMA1_TX_EN, ICE_SMA2_DIR_EN and ICE_SMA2_TX_EN. Nothing in the
driver writes the register during initialization, so
ice_dpll_sw_pins_update() sees all pins as inactive and
ice_dpll_sw_pin_frequency_get() permanently returns 0 Hz for every
SW pin.
Fix this by writing a default SMA configuration in
ice_dpll_init_info_sw_pins(): clear all SMA bits, then set SMA1 and
SMA2 as active inputs (DIR_EN=0) with U.FL1 output and U.FL2 input
disabled. Each SMA/U.FL pair shares a physical signal path so only
one pin per pair can be active at a time. U.FL pins still report
frequency 0 after this fix: U.FL1 (output-only) is disabled by
ICE_SMA1_TX_EN which keeps the TX output buffer off, and U.FL2
(input-only) is disabled by ICE_SMA2_UFL2_RX_DIS. They can be
activated by changing the corresponding SMA pin direction via dpll
netlink.
Fixes: 2dd5d03c77 ("ice: redesign dpll sma/u.fl pins control")
Signed-off-by: Petr Oros <poros@redhat.com>
Reviewed-by: Ivan Vecera <ivecera@redhat.com>
Reviewed-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com>
Tested-by: Alexander Nowlin <alexander.nowlin@intel.com>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20260427-jk-iwl-net-petr-oros-fixes-v1-7-cdcb48303fd8@intel.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
