The Kingston OM3SGP42048K2-A00 (PCI ID 2646:502f) firmware has a race
condition when processing concurrent write zeroes and DSM (discard)
commands, causing spurious "LBA Out of Range" errors and IOMMU page
faults at address 0x0.
The issue is reliably triggered by running two concurrent mkfs commands
on different partitions of the same drive, which generates interleaved
write zeroes and discard operations.
Disable write zeroes for this device, matching the pattern used for
other Kingston OM* drives that have similar firmware issues.
Cc: stable@vger.kernel.org
Signed-off-by: Robert Beckett <bob.beckett@collabora.com>
Assisted-by: claude-opus-4-6-v1
Signed-off-by: Keith Busch <kbusch@kernel.org>
The NVM Command Set Identify Controller data may report a non-zero
Write Zeroes Size Limit (wzsl). When present, nvme_init_non_mdts_limits()
unconditionally overrides max_zeroes_sectors from wzsl, even if
NVME_QUIRK_DISABLE_WRITE_ZEROES previously set it to zero.
This effectively re-enables write zeroes for devices that need it
disabled, defeating the quirk. Several Kingston OM* drives rely on
this quirk to avoid firmware issues with write zeroes commands.
Check for the quirk before applying the wzsl override.
Fixes: 5befc7c26e ("nvme: implement non-mdts command limits")
Cc: stable@vger.kernel.org
Signed-off-by: Robert Beckett <bob.beckett@collabora.com>
Assisted-by: claude-opus-4-6-v1
Signed-off-by: Keith Busch <kbusch@kernel.org>
A block device with a very large discard_granularity queue limit may not
be able to report it in the 16-bit NPDG and NPDA fields in the Identify
Namespace data structure. For this reason, version 2.1 of the NVMe specs
added 32-bit fields NPDGL and NPDAL to the NVM Command Set Specific
Identify Namespace structure. So report the discard_granularity there
too and set OPTPERF to 11b to indicate those fields are supported.
Signed-off-by: Caleb Sander Mateos <csander@purestorage.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Use the NVME_NS_FEAT_OPTPERF_SHIFT constant in nvmet_bdev_set_limits()
to set the OPTPERF bits of the nvme_id_ns NSFEAT field instead of the
magic number 4.
Signed-off-by: Caleb Sander Mateos <csander@purestorage.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Currently, nvme_config_discard() always sets the discard_granularity
queue limit to the logical block size. However, NVMe namespaces can
advertise a larger preferred discard granularity in the NPDG or NPDA
field of the Identify Namespace structure or the NPDGL or NPDAL fields
of the I/O Command Set Specific Identify Namespace structure.
Use these fields to compute the discard_granularity limit. The logic is
somewhat involved. First, the fields are optional. NPDG is only reported
if the low bit of OPTPERF is set in NSFEAT. NPDA is reported if any bit
of OPTPERF is set. And NPDGL and NPDAL are reported if the high bit of
OPTPERF is set. NPDGL and NPDAL can also each be set to 0 to opt out of
reporting a limit. I/O Command Set Specific Identify Namespace may also
not be supported by older NVMe controllers. Another complication is that
multiple values may be reported among NPDG, NPDGL, NPDA, and NPDAL. The
spec says to prefer the values reported in the L variants. The spec says
NPDG should be a multiple of NPDA and NPDGL should be a multiple of
NPDAL, but it doesn't specify a relationship between NPDG and NPDAL or
NPDGL and NPDA. So use the maximum of the reported NPDG(L) and NPDA(L)
values as the discard_granularity.
Signed-off-by: Caleb Sander Mateos <csander@purestorage.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
The NVMe specifications are big fans of "0's based"/"0-based" fields for
encoding values that must be positive. The encoded value is 1 less than
the value it represents. nvmet already provides a helper to0based() for
encoding 0's based values, so add a corresponding helper to decode these
fields on the host side.
Suggested-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Caleb Sander Mateos <csander@purestorage.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Currently, the I/O Command Set specific Identify Namespace structure is
only fetched for controllers that support extended LBA formats. This is
because struct nvme_id_ns_nvm is only used by nvme_configure_pi_elbas(),
which is only called when the ELBAS bit is set in the CTRATT field of
the Identify Controller structure.
However, the I/O Command Set specific Identify Namespace structure will
soon be used in nvme_update_disk_info(), so always try to obtain it in
nvme_update_ns_info_block(). This Identify structure is first defined in
NVMe spec version 2.0, but controllers reporting older versions could
still implement it.
Signed-off-by: Caleb Sander Mateos <csander@purestorage.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
In NVMe verson 2.0 and below, OPTPERF comprises only bit 4 of NSFEAT in
the Identify Namespace structure. Since version 2.1, OPTPERF includes
both bits 4 and 5 of NSFEAT. Replace the NVME_NS_FEAT_IO_OPT constant
with NVME_NS_FEAT_OPTPERF_SHIFT, NVME_NS_FEAT_OPTPERF_MASK, and
NVME_NS_FEAT_OPTPERF_MASK_2_1, representing the first bit, pre-2.1 bit
width, and post-2.1 bit width of OPTPERF.
Update nvme_update_disk_info() to check both OPTPERF bits for
controllers that report version 2.1 or newer, as NPWG and NOWS are
supported even if only bit 5 is set.
Signed-off-by: Caleb Sander Mateos <csander@purestorage.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
The choice of what queue limits are set in nvme_update_disk_info() vs.
nvme_config_discard() seems a bit arbitrary. A subsequent commit will
compute the discard_granularity limit using struct nvme_id_ns, which is
only passed to nvme_update_disk_info() currently. So move the logic in
nvme_config_discard() to nvme_update_disk_info(). Replace several
instances of ns->ctrl in nvme_update_disk_info() with the ctrl variable
brought from nvme_config_discard().
Signed-off-by: Caleb Sander Mateos <csander@purestorage.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
A subsequent change will use the NPDGL and NPDAL fields of the NVM
Command Set Specific Identify Namespace structure, so add them (and the
handful of intervening fields) to struct nvme_id_ns_nvm. Add an
assertion that the size is still 4 KB.
Signed-off-by: Caleb Sander Mateos <csander@purestorage.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Allow userspace to trigger a reauth (REPLACETLSPSK) from sysfs.
This can be done by writing a zero to the sysfs file.
echo 0 > /sys/devices/virtual/nvme-fabrics/ctl/nvme0/tls_configured_key
In order to use the new keys for the admin queue we call controller
reset. This isn't ideal, but I can't find a simpler way to reset the
admin queue TLS connection.
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Wilfred Mallawa <wilfred.mallawa@wdc.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Curently after the host sends a REPLACETLSPSK we free the TLS keys as
part of calling nvmet_auth_sq_free() on success. This means when the
host sends a follow up REPLACETLSPSK we return CONCAT_MISMATCH as the
check for !nvmet_queue_tls_keyid(req->sq) fails.
This patch ensures we don't free the TLS key on success as we might need
it again in the future.
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Wilfred Mallawa <wilfred.mallawa@wdc.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Keith Busch <kbusch@kernel.org>
If the host sends a AUTH_Negotiate Message on the admin queue with
REPLACETLSPSK set then we expect and require a TLS connection and
shouldn't report an error if TLS is enabled.
This change only enforces the nvmet_queue_tls_keyid() check if we aren't
resetting the negotiation.
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Wilfred Mallawa <wilfred.mallawa@wdc.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Remove crypto/hkdf.c, since it's no longer used. Originally it had two
users, but now both of them just inline the needed HMAC computations
using the HMAC library APIs. That ends up being better, since it
eliminates all the complexity and performance issues associated with the
crypto_shash abstraction and multi-step HMAC input formatting.
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Acked-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Now that nvme-auth uses the crypto library instead of crypto_shash,
remove obsolete selections from the NVME_AUTH kconfig option.
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Acked-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Since nvme_auth_digest_name() is no longer used, remove it and the
associated data from the hash_map array.
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Acked-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Signed-off-by: Keith Busch <kbusch@kernel.org>
For the HMAC computation in nvmet_auth_ctrl_hash(), use the crypto
library instead of crypto_shash. This is simpler, faster, and more
reliable. Notably, this eliminates the crypto transformation object
allocation for every call, which was very slow.
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Acked-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Signed-off-by: Keith Busch <kbusch@kernel.org>
For the HMAC computation in nvmet_auth_host_hash(), use the crypto
library instead of crypto_shash. This is simpler, faster, and more
reliable. Notably, this eliminates the crypto transformation object
allocation for every call, which was very slow.
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Acked-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Since nvme-auth is now doing its HMAC computations using the crypto
library, it's guaranteed that all the algorithms actually work.
Therefore, remove the crypto_has_shash() checks which are now obsolete.
However, the caller in nvmet_auth_negotiate() seems to have also been
relying on crypto_has_shash(nvme_auth_hmac_name(host_hmac_id)) to
validate the host_hmac_id. Therefore, make it validate the ID more
directly by checking whether nvme_auth_hmac_hash_len() returns 0 or not.
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Acked-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Now that the crypto_shash that is being allocated in
nvme_auth_process_dhchap_challenge() and stored in the
struct nvme_dhchap_queue_context is no longer used, remove it.
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Acked-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Signed-off-by: Keith Busch <kbusch@kernel.org>
For the HMAC computation in nvme_auth_dhchap_setup_ctrl_response(), use
the crypto library instead of crypto_shash. This is simpler, faster,
and more reliable.
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Acked-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Signed-off-by: Keith Busch <kbusch@kernel.org>
For the HMAC computation in nvme_auth_dhchap_setup_host_response(), use
the crypto library instead of crypto_shash. This is simpler, faster,
and more reliable.
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Acked-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Signed-off-by: Keith Busch <kbusch@kernel.org>
For the HKDF-Expand-Label computation in nvme_auth_derive_tls_psk(), use
the crypto library instead of crypto_shash and crypto/hkdf.c.
While this means the HKDF "helper" functions are no longer utilized,
they clearly weren't buying us much: it's simpler to just inline the
HMAC computations directly, and this code needs to be tested anyway. (A
similar result was seen in fs/crypto/. As a result, this eliminates the
last user of crypto/hkdf.c, which we'll be able to remove as well.)
As usual this is also a lot more efficient, eliminating the allocation
of a transformation object and multiple other dynamic allocations.
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Acked-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Signed-off-by: Keith Busch <kbusch@kernel.org>
For the HMAC computation in nvme_auth_generate_digest(), use the crypto
library instead of crypto_shash. This is simpler, faster, and more
reliable. Notably, this eliminates the crypto transformation object
allocation for every call, which was very slow.
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Acked-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Signed-off-by: Keith Busch <kbusch@kernel.org>
For the HMAC computation in nvme_auth_generate_psk(), use the crypto
library instead of crypto_shash. This is simpler, faster, and more
reliable. Notably, this eliminates the crypto transformation object
allocation for every call, which was very slow.
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Acked-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Signed-off-by: Keith Busch <kbusch@kernel.org>
For the hash and HMAC computations in nvme_auth_augmented_challenge(),
use the crypto library instead of crypto_shash. This is simpler,
faster, and more reliable. Notably, this eliminates two crypto
transformation object allocations for every call, which was very slow.
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Acked-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Signed-off-by: Keith Busch <kbusch@kernel.org>
For the HMAC computation in nvme_auth_transform_key(), use the crypto
library instead of crypto_shash. This is simpler, faster, and more
reliable. Notably, this eliminates the transformation object allocation
for every call, which was very slow.
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Acked-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Add some helper functions for computing HMAC-SHA256, HMAC-SHA384, or
HMAC-SHA512 values using the crypto library instead of crypto_shash.
These will enable some significant simplifications and performance
improvements in nvme-auth.
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Acked-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Signed-off-by: Keith Busch <kbusch@kernel.org>
nvme_auth_derive_tls_psk() is always called with psk_len == hash_len.
And based on the comments above nvme_auth_generate_psk() and
nvme_auth_derive_tls_psk(), this isn't an implementation choice but
rather just the length the spec uses. Add a check which makes this
explicit, so that when cleaning up nvme_auth_derive_tls_psk() we don't
have to retain support for arbitrary values of psk_len.
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Acked-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Signed-off-by: Keith Busch <kbusch@kernel.org>
This function does not generate a key. It parses the key from the
string that the caller passes in.
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Acked-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Unit-test the sequence of function calls that derive tls_psk, so that we
can be more confident that changes in the implementation don't break it.
Since the NVMe specification doesn't seem to include any test vectors
for this (nor does its description of the algorithm seem to match what
was actually implemented, for that matter), I just set the expected
values to the values that the code currently produces. In the case
of SHA-512, nvme_auth_generate_digest() currently returns -EINVAL, so
for now the test tests for that too. If it is later determined that
some other behavior is needed, the test can be updated accordingly.
Tested with:
tools/testing/kunit/kunit.py run --kunitconfig drivers/nvme/common/
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Acked-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Signed-off-by: Keith Busch <kbusch@kernel.org>
For input parameters, use pointer to const. This makes it easier to
understand which parameters are inputs and which are outputs.
In addition, consistently use char for strings and u8 for binary. This
makes it easier to understand what is a string and what is binary data.
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Acked-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Fully constify the dhgroup_map and hash_map arrays. Remove 'const' from
individual fields, as it is now redundant.
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Acked-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Define a NVME_AUTH_MAX_DIGEST_SIZE constant and use it in the
appropriate places.
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Acked-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Signed-off-by: Keith Busch <kbusch@kernel.org>
The current sbi_pmu_test attempts to read firmware counters without
configuring them first with SBI_EXT_PMU_COUNTER_CFG_MATCH.
Previously this did not fail because KVM incorrectly allowed the read
and accessed fw_event[] with an out-of-bounds index when the counter
was unconfigured. After fixing that bug, the read now correctly returns
SBI_ERR_INVALID_PARAM, causing the selftest to fail.
Update the test to configure a firmware event before reading the
counter. Also add a negative test to ensure that attempting to read an
unconfigured firmware counter fails gracefully.
Signed-off-by: Jiakai Xu <xujiakai2025@iscas.ac.cn>
Signed-off-by: Jiakai Xu <jiakaiPeanut@gmail.com>
Reviewed-by: Andrew Jones <andrew.jones@oss.qualcomm.com>
Reviewed-by: Nutty Liu <nutty.liu@hotmail.com>
Link: https://lore.kernel.org/r/20260316014533.2312254-3-xujiakai2025@iscas.ac.cn
Signed-off-by: Anup Patel <anup@brainfault.org>
When a guest invokes SBI_EXT_PMU_COUNTER_FW_READ or
SBI_EXT_PMU_COUNTER_FW_READ_HI on a firmware counter that has not been
configured via SBI_EXT_PMU_COUNTER_CFG_MATCH, the pmc->event_idx remains
SBI_PMU_EVENT_IDX_INVALID (0xFFFFFFFF). get_event_code() extracts the
lower 16 bits, yielding 0xFFFF (65535), which is then used to index into
kvpmu->fw_event[]. Since fw_event is only RISCV_KVM_MAX_FW_CTRS (32)
entries, this triggers an array-index-out-of-bounds:
UBSAN: array-index-out-of-bounds in arch/riscv/kvm/vcpu_pmu.c:255:37
index 65535 is out of range for type 'kvm_fw_event [32]'
Add a check for the known unconfigured case (SBI_PMU_EVENT_IDX_INVALID)
and a WARN_ONCE guard for any unexpected out-of-bounds event codes,
returning -EINVAL in both cases.
Fixes: badc386869 ("RISC-V: KVM: Support firmware events")
Fixes: 08fb07d6dc ("RISC-V: KVM: Support 64 bit firmware counters on RV32")
Signed-off-by: Jiakai Xu <xujiakai2025@iscas.ac.cn>
Signed-off-by: Jiakai Xu <jiakaiPeanut@gmail.com>
Reviewed-by: Andrew Jones <andrew.jones@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260316014533.2312254-2-xujiakai2025@iscas.ac.cn
Signed-off-by: Anup Patel <anup@brainfault.org>
When a fabric receives an error interrupt, the error may have
occurred on a different fabric. The target timeout lookup was using
the wrong base address (cbb->regs) with offsets from a different
fabric's target map, causing a kernel page fault.
Unable to handle kernel paging request at virtual address ffff80000954cc00
pc : tegra234_cbb_get_tmo_slv+0xc/0x28
Call trace:
tegra234_cbb_get_tmo_slv+0xc/0x28
print_err_notifier+0x6c0/0x7d0
tegra234_cbb_isr+0xe4/0x1b4
Add tegra234_cbb_get_fabric() to look up the correct fabric device
using fab_id, and use its base address for accessing target timeout
registers.
Fixes: 25de5c8fe0 ("soc/tegra: cbb: Improve handling for per SoC fabric data")
Signed-off-by: Sumit Gupta <sumitg@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Set the Error Response Disable (ERD) bit to mask SError responses
and use interrupt-based error reporting. When the ERD bit is set,
inband error responses to the initiator via SError are suppressed,
and fabric errors are reported via an interrupt instead.
The register is set during boot but the info is lost during system
suspend and needs to be set again on resume.
Fixes: fc2f151d23 ("soc/tegra: cbb: Add driver for Tegra234 CBB 2.0")
Signed-off-by: Sumit Gupta <sumitg@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Currently, there's a mix of spaces and tabs used for aligning the
bodies of the macros, even within the same block. Use tabs throughout
for consistency.
No functional change; 'git diff -w' produces no output.
Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Link: https://patch.msgid.link/20260327141513.1250499-2-linux@rasmusvillemoes.dk
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
snd_pcm_suspend_all() walks all PCM substreams and uses a lockless
runtime check to skip closed streams. It then calls snd_pcm_suspend()
for each remaining substream and finally runs snd_pcm_sync_stop() in a
second pass.
The runtime lifetime is still controlled by pcm->open_mutex in the
open/release path. That means a concurrent close can clear or free
substream->runtime after the initial check in snd_pcm_suspend_all(),
leaving the later suspend or sync-stop path to dereference a stale or
NULL runtime pointer.
Serialize snd_pcm_suspend_all() with pcm->open_mutex so the runtime
pointer stays stable across both loops. This matches the existing PCM
runtime lifetime rule already used by other core paths that access
substream->runtime outside the stream lock.
Suggested-by: Takashi Iwai <tiwai@suse.com>
Signed-off-by: Cássio Gabriel <cassiogabrielcontato@gmail.com>
Link: https://patch.msgid.link/20260327-alsa-pcm-suspend-open-close-lock-v2-1-cc4baca4dcd6@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
When attach to PC Type-A port, the USB device controller does not function
at all. Because it is configured as source-only and a Type-A port doesn't
support PD capability, a data role swap is impossible.
Actually, PTN5110THQ is configured for Source role only at POR, but after
POR it can operate as a DRP (Dual-Role Power). By switching the power-role
to dual, the port can operate as a sink and enter device mode when attach
to Type-A port.
Since the board design uses EN_SRC to control the 5V VBUS path and EN_SNK
to control the 12V VBUS output, to avoid outputting a higher VBUS when in
sink role, we set the operation current limit to 0mA so that SW will not
control EN_SNK at all.
Fixes: 2faf4ebcee ("arm64: dts: freescale: imx8qxp-mek: enable cadence usb3")
Signed-off-by: Xu Yang <xu.yang_2@nxp.com>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
When attach to PC Type-A port, the USB device controller does not function
at all. Because it is configured as source-only and a Type-A port doesn't
support PD capability, a data role swap is impossible.
Actually, PTN5110THQ is configured for Source role only at POR, but after
POR it can operate as a DRP (Dual-Role Power). By switching the power-role
to dual, the port can operate as a sink and enter device mode when attach
to Type-A port.
Since the board design uses EN_SRC to control the 5V VBUS path and EN_SNK
to control the 12V VBUS output, to avoid outputting a higher VBUS when in
sink role, we set the operation current limit to 0mA so that SW will not
control EN_SNK at all.
Fixes: b237975b2c ("arm64: dts: imx8qm-mek: add usb 3.0 and related type C nodes")
Signed-off-by: Xu Yang <xu.yang_2@nxp.com>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
LX2162A Clearfog has four LEDs attached physically to the 4-port SFP
connector. They are intended to show information relating to network
interface status.
Select "netdev" as default trigger for each LED, and link each one to
the respective dpmac instance as trigger-source.
Signed-off-by: Josua Mayer <josua@solid-run.com>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Add aliases for crypto accelerator and rtc0 ensuring that on-SoM RTC and
the SoC A72 domain crypto accelerator are assigned first index.
Further set model and compatible strings which are informative but
overridden by actual boards.
Signed-off-by: Josua Mayer <josua@solid-run.com>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Add alias for rtc0 ensuring that on-COM RTC is assigned first index.
Note that fsl-lx2160a.dtsi already defines an alias for rtc1 which
implicitly achieved the same result.
Signed-off-by: Josua Mayer <josua@solid-run.com>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Commit 8a1365c7bb ("arm64: dts: lx2160a: add pinmux and i2c gpio to
support bus recovery") introduced pinmux nodes for lx2160 i2c
interfaces, allowing runtime change between i2c and gpio functions
implementing bus recovery.
However, the dynamic configuration area (overwrite MUX) used by the
pinctrl-single driver initially reads as zero and does not reflect the
actual hardware state set by the Reset Configuration Word (RCW) at
power-on.
Because multiple groups of pins are configured from a single 32-bit
register, the first write from the pinctrl driver unintentionally clears
all other bits to zero.
Add description for all bits of RCWSR12 register, allowing boards to
explicitly define and restore their intended hardware state.
This includes i2c, gpio, flextimer, spi, can and sdhc functions.
Other configuration words, i.e. RCWSR13 & RCWSR14 may be added in the
future for boards setting non-zero values there.
Fixes: 8a1365c7bb ("arm64: dts: lx2160a: add pinmux and i2c gpio to support bus recovery")
Signed-off-by: Josua Mayer <josua@solid-run.com>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
