rt_stall tests the ext DL server which was introduced in commit
cd959a3562 ("sched_ext: Add a DL server for sched_ext tasks").
On older kernels that lack this feature, the test calls ksft_exit_fail()
internally which terminates the entire runner process, preventing
subsequent tests from running.
Add a guard in setup() that checks for the ext_server field in struct rq
via __COMPAT_struct_has_field() and returns SCX_TEST_SKIP if not present.
Also print the names of skipped tests in the results summary, mirroring
the existing behavior for failed tests.
Signed-off-by: Cheng-Yang Chou <yphbchou0911@gmail.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Since Linux 7.0, kfuncs annotated with KF_IMPLICIT_ARGS require pahole
v1.26 or later. Without it, such kfuncs will have incorrect BTF
prototypes in vmlinux, causing BPF programs to fail to load with a
"func_proto incompatible with vmlinux" error. Many sched_ext kfuncs
are affected (e.g. scx_bpf_create_dsq, scx_bpf_kick_cpu).
The root cause: scripts/Makefile.btf passes --btf_features=decl_tag_kfuncs
to pahole only when pahole >= 1.26. Without that flag, pahole emits no
DECL_TAG BTF entries for __bpf_kfunc-annotated functions. As a result,
resolve_btfids/main.c::collect_kfuncs() finds no bpf_kfunc DECL_TAGs,
short-circuits at line 1002, and btf2btf() never creates the _impl
variants or strips the implicit 'aux' argument from the visible proto.
The vmlinux BTF retains the 3-param prototype while BPF programs declare
the 2-param version, triggering the mismatch.
Raise the minimum version in the requirements table from 1.22 to 1.26
and add a note explaining the failure mode, so users understand why
their BPF programs fail on distributions shipping pahole v1.25 (e.g.
Ubuntu 24.04 LTS).
Suggested-by: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: zhidao su <suzhidao@xiaomi.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
test_cgcore_populated (test_core) and test_cgkill_{simple,tree,forkbomb}
(test_kill) check cgroup.events "populated 0" immediately after reaping
child tasks with waitpid(). This used to work because cgroup_task_exit() in
do_exit() unlinked tasks from css_sets before exit_notify() woke up
waitpid().
d245698d72 ("cgroup: Defer task cgroup unlink until after the task is done
switching out") moved the unlink to cgroup_task_dead() in
finish_task_switch(), which runs after exit_notify(). The populated counter
is now decremented after the parent's waitpid() can return, so there is no
longer a synchronous ordering guarantee. On PREEMPT_RT, where
cgroup_task_dead() is further deferred through lazy irq_work, the race
window is even larger.
The synchronous populated transition was never part of the cgroup interface
contract - it was an implementation artifact. Use cg_read_strcmp_wait() which
retries for up to 1 second, matching what these tests actually need to
verify: that the cgroup eventually becomes unpopulated after all tasks exit.
Fixes: d245698d72 ("cgroup: Defer task cgroup unlink until after the task is done switching out")
Reported-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Tejun Heo <tj@kernel.org>
Tested-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: Christian Brauner <brauner@kernel.org>
Cc: cgroups@vger.kernel.org
a72f73c4dd ("cgroup: Don't expose dead tasks in cgroup") hid PF_EXITING
tasks from cgroup.procs so that systemd doesn't see tasks that have already
been reaped via waitpid(). However, the populated counter (nr_populated_csets)
is only decremented when the task later passes through cgroup_task_dead() in
finish_task_switch(). This means cgroup.procs can appear empty while the
cgroup is still populated, causing rmdir to fail with -EBUSY.
Fix this by making cgroup_rmdir() wait for dying tasks to fully leave. If the
cgroup is populated but all remaining tasks have PF_EXITING set (the task
iterator returns none due to the existing filter), wait for a kick from
cgroup_task_dead() and retry. The wait is brief as tasks are removed from the
cgroup's css_set between PF_EXITING assertion in do_exit() and
cgroup_task_dead() in finish_task_switch().
v2: cgroup_is_populated() true to false transition happens under css_set_lock
not cgroup_mutex, so retest under css_set_lock before sleeping to avoid
missed wakeups (Sebastian).
Fixes: a72f73c4dd ("cgroup: Don't expose dead tasks in cgroup")
Reported-by: kernel test robot <oliver.sang@intel.com>
Closes: https://lore.kernel.org/oe-lkp/202603222104.2c81684e-lkp@intel.com
Reported-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: Bert Karwatzki <spasswolf@web.de>
Cc: Michal Koutny <mkoutny@suse.com>
Cc: cgroups@vger.kernel.org
- Clear the pending exception state from a vcpu coming out of
reset, as it could otherwise affect the first instruction
executed in the guest.
- Fix pointer arithmetic in address translation emulation, so that the
Hardware Access bit is set on the correct PTE instead of some other
location.
s390:
- Fix deadlock in new memory management.
- Properly handle kernel faults on donated memory.
- Fix bounds checking for irq routing, with selftest.
- Fix invalid machine checks and log all of them.
-----BEGIN PGP SIGNATURE-----
iQFIBAABCgAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmnCvYAUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroO6Kgf9EobmY4mWv8EmGiLQqsdtShzaSDa+
cvzoWT8OEECFlZzWLCn/9/FiF68IkNfoV5ad79+2vJ5um+ZlJtkjtq6z8EbvhBBZ
/QppVas+gmqhctuR41GnDxSKReXNEKIfQ1qwxAEujriui4FEpHAza+yRQ8jHJCCN
LpcwO7dubHWe+HJewF0t7P6MN76Ln6EJWS2tu/zQUBpKKAvLHkm2EHk38X+vwGlN
Lip9tcCYgzZXKdHZgTKKm45Te0ijpi/gxZ0j0kn6FNBkY8PIbtwlB2Hl8H6J5jP1
q+0dLlzFiAK5ww9Wrf5/LAt9vFcZKyOTY1y3ADEvdfLLwVBNdhaZ318Myw==
=Zd43
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm fixes from Paolo Bonzini:
"ARM:
- Clear the pending exception state from a vcpu coming out of reset,
as it could otherwise affect the first instruction executed in the
guest
- Fix pointer arithmetic in address translation emulation, so that
the Hardware Access bit is set on the correct PTE instead of some
other location
s390:
- Fix deadlock in new memory management
- Properly handle kernel faults on donated memory
- Fix bounds checking for irq routing, with selftest
- Fix invalid machine checks and log all of them"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: arm64: Fix the descriptor address in __kvm_at_swap_desc()
KVM: s390: vsie: Avoid injecting machine check on signal
KVM: s390: log machine checks more aggressively
KVM: s390: selftests: Add IRQ routing address offset tests
KVM: s390: Limit adapter indicator access to mapped page
s390/mm: Add missing secure storage access fixups for donated memory
KVM: arm64: Discard PC update state on vcpu reset
KVM: s390: Fix a deadlock
The agent_id field is a two byte ascii field addressing
the target agent on the crypto card. Some code however
addresses this field as unsigned short. Rework these
places to treat this field always as a two byte array.
Unfortunately this field also shows up as __u16 in
struct ica_xcRB as part of the zcrypt ioctl interface.
Leave this untouched as it would break the API.
There are two other places (func_id) where a byte array
gets assigned with hex values but in fact these are ascii
value. So replace these assignments with real ascii values
for more readability.
Signed-off-by: Harald Freudenberger <freude@linux.ibm.com>
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Use an explicit variable "card" for the card addressing in
function _zcrypt_send_cprb instead of the confusing field
"user_defined" from the ica_xcRB struct. This makes the code
somewhat cleaner and easier to understand.
Reviewed-by: Holger Dengler <dengler@linux.ibm.com>
Signed-off-by: Harald Freudenberger <freude@linux.ibm.com>
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
In general all MKVPs (Master Key Verification Pattern) are binary
data - usually some kind of shortened hash value e.g. sha256.
Some code parts however used some u64 type which made compares
a little bit easier. Anyway this is binary data and so all
fields related to MKVP are now u8[] and function parameters
use (const) u8 * now. The sysfs emit for the MKVPs also has
been adapted to first format the MKVP as hex string into a
buffer and then use %s with sysfs_emit_at() to generate the
sysfs output. The patch also include a simple whitespace fix.
Signed-off-by: Harald Freudenberger <freude@linux.ibm.com>
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Slight rework on the apfs field: Instead of unsigned char[4]
make this a real 32 bit unsigned int field. With that done,
some assignments and some printouts can be simplified.
With that comes a slight move of the anonymous struct covering
the message type 86 header to dedupe some code lines.
Reviewed-by: Holger Dengler <dengler@linux.ibm.com>
Signed-off-by: Harald Freudenberger <freude@linux.ibm.com>
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Slight rework of the domain handling within the zcrypt dd:
Remove this curious construct to give a pointer to the
domain field within the CPRB struct to the zcrypt API and
later fill in the target domain via this pointer.
Now the domain is filled in with the send function when
the ready constructed AP message is about to be pushed
down into the software queue for AP queue processing.
So now the domain handling for CCA, EP11 and (internal) rng
CPRBs is the same. With this comes a slight reshuffle of the
code related to domain processing in the zcrypt API and the
message type 60 protocol implementation code.
Reviewed-by: Holger Dengler <dengler@linux.ibm.com>
Signed-off-by: Harald Freudenberger <freude@linux.ibm.com>
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Function rng_type6cprb_msgx() is only used once and thus no need
to provide it in header file any more. Move it at the place within
the code where it is used.
Reviewed-by: Holger Dengler <dengler@linux.ibm.com>
Reviewed-by: Anthony Krowiak <akrowiak@linux.ibm.com>
Signed-off-by: Harald Freudenberger <freude@linux.ibm.com>
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Provide an s390 specific arch_raw_cpu_ptr() implementation which avoids the
detour over get_lowcore() to get the lowcore pointer. The inline assembly
is implemented with an alternative so that relocated lowcore (percpu offset
is at a different address) is handled correctly.
This turns code like this
102f78: a7 39 00 00 lghi %r3,0
102f7c: e3 20 33 b8 00 08 ag %r2,952(%r3)
which adds the percpu offset to register r2 into a single instruction
102f7c: e3 20 33 b8 00 08 ag %r2,952(%r0)
and also avoids the need of a base register, thus reducing register
pressure.
With defconfig bloat-o-meter -t provides this result:
add/remove: 12/26 grow/shrink: 183/3391 up/down: 14880/-41950 (-27070)
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Tests showed that there is a memory leak if CCA cards are used as
accelerator for clear key RSA requests (ME and CRT). With the last
rework for the memory allocation the AP messages are allocated by
ap_init_apmsg() but for some reason on two places (ME and CRT) the
older allocation was still in place. So the first allocation simple
was never freed.
Fixes: 57db62a130 ("s390/ap/zcrypt: Rework AP message buffer allocation")
Reported-by: Yi Zhang <yi.zhang@redhat.com>
Closes: https://lore.kernel.org/linux-s390/CAHj4cs9H67Uz0iVaRQv447p7JFPRPy3TKAT4=Y6_e=wSHCZM5w@mail.gmail.com/
Reported-by: Nadja Hariz <Nadia.Hariz@ibm.com>
Cc: stable@vger.kernel.org
Reviewed-by: Ingo Franzki <ifranzki@linux.ibm.com>
Reviewed-by: Holger Dengler <dengler@linux.ibm.com>
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Harald Freudenberger <freude@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
commit fcc43a7e29 ("s390/configs: Set HZ=1000") changed the interrupt
frequency of the system. On machines with heavy load and many perf event
overflows, this might lead to an exception. Dmesg displays these entries:
[112.242542] cpum_sf: Loading sampling controls failed: op 1 err -22
One line per CPU online.
The root cause is the CPU Measurement sampling facility overflow
adjustment. Whenever an overflow (too much samples per tick) occurs, the
sampling rate is adjusted and increased. This was done without observing
the maximum sampling rate limit. When the current sampling interval is
higher than the maximum sampling rate limit, the lsctl instruction raises
an exception. The error messages is the result of such an exception.
Observe the upper limit when the new sampling rate is recalculated.
Cc: stable@vger.kernel.org
Fixes: 39d4a501a9 ("s390/cpum_sf: Adjust sampling interval to avoid hitting sample limits")
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Reviewed-by: Sumanth Korikkar <sumanthk@linux.ibm.com>
Reviewed-by: Hendrik Brueckner <brueckner@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Add LANDLOCK_RESTRICT_SELF_TSYNC to the backwards compatibility example
for restrict flags. This introduces completeness, similar to that of
the ruleset attributes example. However, as the new example can impact
enforcement in certain cases, an appropriate warning is also included.
Additionally, I modified the two comments of the example to make them
more consistent with the ruleset attributes example's.
Signed-off-by: Panagiotis "Ivory" Vasilopoulos <git@n0toose.net>
Co-developed-by: Dan Cojocaru <dan@dcdev.ro>
Signed-off-by: Dan Cojocaru <dan@dcdev.ro>
Reviewed-by: Günther Noack <gnoack@google.com>
Link: https://lore.kernel.org/r/20260304-landlock-docs-add-tsync-example-v4-1-819a276f05c5@n0toose.net
[mic: Update date, improve comments consistency, fix newline issue]
Signed-off-by: Mickaël Salaün <mic@digikod.net>
The function pump_transfers() was split into
pxa2xx_spi_transfer_one(), pxa2xx_spi_handle_err() and
pxa2xx_spi_set_cs() in commit d5898e19c0 ("spi: pxa2xx: Use
core message processing loop"). The comment in
pxa2xx_spi_dma_transfer_complete() still warns about concurrent
calls to pump_transfers(), but the actual operation protected by
dma_running is now spi_finalize_current_transfer(). Update the
reference.
Assisted-by: unnamed:deepseek-v3.2 coccinelle
Signed-off-by: Kexin Sun <kexinsun@smail.nju.edu.cn>
Link: https://patch.msgid.link/20260321105945.8224-1-kexinsun@smail.nju.edu.cn
Signed-off-by: Mark Brown <broonie@kernel.org>
The function snd_soc_new_pcms() was removed during the
multi-component refactoring in commit f0fba2ad1b ("ASoC:
multi-component - ASoC Multi-Component Support"). Its PCM creation
role is now handled by soc_new_pcm(), which was later moved to
sound/soc/soc-pcm.c by commit ddee627cf6 ("ASoC: core - Separate
out PCM operations into new file.").
In fsl_dma.c, update the comment to reference soc_new_pcm(). Also
remove the stale paragraph about snd_dma_alloc_pages() always
allocating in lowmem, since commit e159704f79 ("ASoC: fsl_dma:
Use managed buffer allocation") replaced that call with
snd_pcm_set_fixed_buffer_all().
In siu_pcm.c, remove the stale comment referencing
snd_soc_new_pcms() and the no-longer-existing socdev structure.
Assisted-by: unnamed:deepseek-v3.2 coccinelle
Signed-off-by: Kexin Sun <kexinsun@smail.nju.edu.cn>
Link: https://patch.msgid.link/20260324041400.16217-1-kexinsun@smail.nju.edu.cn
Signed-off-by: Mark Brown <broonie@kernel.org>
cxl: Adjust the startup priority of cxl_pmem to be higher than that of cxl_acpi
cxl/mbox: Use proper endpoint validity check upon sanitize
cxl/hdm: Avoid incorrect DVSEC fallback when HDM decoders are enabled
cxl/acpi: Fix CXL_ACPI and CXL_PMEM Kconfig tristate mismatch
cxl/region: Fix leakage in __construct_region()
cxl/port: Fix use after free of parent_port in cxl_detach_ep()
-----BEGIN PGP SIGNATURE-----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=ct8z
-----END PGP SIGNATURE-----
Merge tag 'cxl-fixes-7.0-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl
Pull Compute Express Link (CXL) fixes from Dave Jiang:
- Adjust the startup priority of cxl_pmem to be higher than that of
cxl_acpi
- Use proper endpoint validity check upon sanitize
- Avoid incorrect DVSEC fallback when HDM decoders are enabled
- Fix CXL_ACPI and CXL_PMEM Kconfig tristate mismatch
- Fix leakage in __construct_region()
- Fix use after free of parent_port in cxl_detach_ep()
* tag 'cxl-fixes-7.0-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl:
cxl: Adjust the startup priority of cxl_pmem to be higher than that of cxl_acpi
cxl/mbox: Use proper endpoint validity check upon sanitize
cxl/hdm: Avoid incorrect DVSEC fallback when HDM decoders are enabled
cxl/acpi: Fix CXL_ACPI and CXL_PMEM Kconfig tristate mismatch
cxl/region: Fix leakage in __construct_region()
cxl/port: Fix use after free of parent_port in cxl_detach_ep()
André Svensson <andre.svensson@axis.com> says:
This series introduces a boolean DT property, dlg,no-gpio-control, for
the DA91xx regulators. Use this property to indicate that GPIO control
is not configured with the functions DVC/RELOAD/EN, allowing buck
registers to be cached.
The DA9121 driver checks dlg,no-gpio-control and updates regmap_config's
volatile_table if the property is present. Buck registers are removed
from the volatile_table if the property is present, enabling caching of
the registers, which removes I2C reads when performing an I2C write to
the buck registers.
Link: https://patch.msgid.link/20260320-no-gpio-control-v2-0-dbc938e462cb@axis.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Some BUCK registers may change without software writes when GPIO pins
are configured for functions DVC/RELOAD/EN. If the board does
not use these pin-controlled features, caching is possible.
Caching BUCK registers removes unnecessary I2C reads when performing
register updates. For example, updating regulator mode can result in
two I2C reads, one from the regulator core regulator_set_mode() and one
from the DA9121 driver, where da9121_buck_set_mode() uses
regmap_update_bits() (read/modify/write).
Check for the optional DT property dlg,no-gpio-control. When present,
select the regmap configuration that does not mark the BUCK1 register
block (DA9121_REG_BUCK_BUCK1_0..DA9121_REG_BUCK_BUCK1_6) as volatile, so
that regmap can cache BUCK1 registers and avoid unnecessary I2C reads.
The property dlg,no-gpio-control is required to ensure that BUCK1
registers can be cached, as the absence of relevant GPIO DT properties
does not imply that the RELOAD/DVC/EN GPIO functions are unused. These
functions are provided by DA91xx GPIO pins and may be controlled by
external hardware without corresponding GPIO DT properties. The
dlg,no-gpio-control property explicitly indicates that none of these
GPIO functions are used.
The dlg,no-gpio-control property is mutually exclusive with
enable-gpios, regardless of whether the referenced GPIO is connected to
a GPIO pin or the IC_EN pin, since pulling IC_EN low powers down the
regulator and registers are reinitialized at startup, leaving cached
values stale.
Co-developed-by: Waqar Hameed <waqar.hameed@axis.com>
Signed-off-by: Waqar Hameed <waqar.hameed@axis.com>
Signed-off-by: André Svensson <andre.svensson@axis.com>
Link: https://patch.msgid.link/20260320-no-gpio-control-v2-2-dbc938e462cb@axis.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add the optional boolean property dlg,no-gpio-control. When present, it
indicates that no DA91xx GPIO pins are configured/used with functions
RELOAD/DVC/EN, which can affect the output voltage control, regulator
mode control and enable signal control.
The absence of relevant GPIO DT properties does not imply that the
RELOAD/DVC/EN GPIO functions are unused. These functions are provided by
DA91xx GPIO pins and may be controlled by external hardware without
corresponding GPIO DT properties. The dlg,no-gpio-control property
explicitly indicates that none of these GPIO functions are used.
It is mutually exclusive with enable-gpios, regardless of whether the
referenced GPIO is connected to a GPIO pin or the IC_EN pin, since
enable-gpios allows the regulator to be controlled via an external
hardware signal.
Co-developed-by: Waqar Hameed <waqar.hameed@axis.com>
Signed-off-by: Waqar Hameed <waqar.hameed@axis.com>
Signed-off-by: André Svensson <andre.svensson@axis.com>
Link: https://patch.msgid.link/20260320-no-gpio-control-v2-1-dbc938e462cb@axis.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add a test verifying that stacksafe() correctly handles 32-bit scalar
spills when comparing stack states for equivalence during state pruning.
A 32-bit scalar spill creates slot[0-3] = STACK_INVALID and
slot[4-7] = STACK_SPILL. Without the im=4 check in stacksafe(), the
STACK_SPILL vs STACK_MISC mismatch at byte 4 causes pruning to fail,
forcing the verifier to re-explore a path that is provably safe.
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20260323022410.75444-2-alexei.starovoitov@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
In increment mode, the tsu clock for the macb is provided separately to
the pck, usually the same clock as the reference to the rtc provided by
an off-chip oscillator. pclk is 150 MHz typically, and the reference is
either 100 MHz or 125 MHz, so having the tsu clock is required for
correct rate selection.
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Add description for the Supm extension. Supm indicates support for pointer
masking in user mode. Supm is mandatory for RVA23S64.
Add dependency check that Supm requires either Smnpm or Ssnpm.
The Supm extension is ratified in commit d70011dde6c2 ("Update to ratified
state") of riscv-j-extension.
Signed-off-by: Guodong Xu <guodong@riscstar.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
The Curiosity-GX10000 (PIC64GX SoC Curiosity Kit) is a compact SoC
prototyping board featuring a Microchip PIC64GX SoC PIC64GC-1000.
Features include:
- 1 GB DDR4 SDRAM
- Gigabit Ethernet
- microSD-card slot
note: due to issue on some board, the SDHCI is limited to HS (High
speed mode, with a clock of 50MHz and 3.3V signals).
Signed-off-by: Pierre-Henry Moussay <pierre-henry.moussay@microchip.com>
Co-developed-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
As mention in sifive,clint.yaml, a specific compatible should be used
for pic64gx, so here it is.
Signed-off-by: Pierre-Henry Moussay <pierre-henry.moussay@microchip.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Add pinctrl nodes to PolarFire to demonstrate their use, matching the
default configuration set by the HSS firmware for the Icicle kit's
reference design, as a demonstration of use.
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
The slider offset can be set via debugfs for balanced mode. The offset
should be only applicable in balanced mode. For other modes, it should
be 0 when writing to MMIO offset,
Fixes: 8306bcaba0 ("thermal: intel: int340x: Add module parameter to change slider offset")
Tested-by: Erin Park <erin.park@intel.com>
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Cc: 6.18+ <stable@vger.kernel.org> # 6.18+
[ rjw: Subject and changelog tweaks ]
Link: https://patch.msgid.link/20260324172346.3317145-1-srinivas.pandruvada@linux.intel.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
LVDS does not use an HPD pin so it may be invalid. Handle
this case correctly in link encoder creation.
Fixes: 7c8fb3b8e9 ("drm/amd/display: Add hpd_source index check for DCE60/80/100/110/112/120 link encoders")
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/5012
Cc: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Cc: Roman Li <roman.li@amd.com>
Reviewed-by: Roman Li <roman.li@amd.com>
Reviewed-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 3b5620f7ee)
Cc: stable@vger.kernel.org
During a GPU page fault, the driver restores the SVM range and then maps it
into the GPU page tables. The current implementation passes a GPU-page-size
(4K-based) PFN to svm_range_restore_pages() to restore the range.
SVM ranges are tracked using system-page-size PFNs. On systems where the
system page size is larger than 4K, using GPU-page-size PFNs to restore the
range causes two problems:
Range lookup fails:
Because the restore function receives PFNs in GPU (4K) units, the SVM
range lookup does not find the existing range. This will result in a
duplicate SVM range being created.
VMA lookup failure:
The restore function also tries to locate the VMA for the faulting address.
It converts the GPU-page-size PFN into an address using the system page
size, which results in an incorrect address on non-4K page-size systems.
As a result, the VMA lookup fails with the message: "address 0xxxx VMA is
removed".
This patch passes the system-page-size PFN to svm_range_restore_pages() so
that the SVM range is restored correctly on non-4K page systems.
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Donet Tom <donettom@linux.ibm.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 074fe395fb)
Forcibly disable the OD_FAN_CURVE feature when temperature or PWM range is invalid,
otherwise PMFW will reject this configuration on smu v14.0.2/14.0.3.
example:
$ sudo cat /sys/bus/pci/devices/<BDF>/gpu_od/fan_ctrl/fan_curve
OD_FAN_CURVE:
0: 0C 0%
1: 0C 0%
2: 0C 0%
3: 0C 0%
4: 0C 0%
OD_RANGE:
FAN_CURVE(hotspot temp): 0C 0C
FAN_CURVE(fan speed): 0% 0%
$ echo "0 50 40" | sudo tee fan_curve
kernel log:
[ 969.761627] amdgpu 0000:03:00.0: amdgpu: Fan curve temp setting(50) must be within [0, 0]!
[ 1010.897800] amdgpu 0000:03:00.0: amdgpu: Fan curve temp setting(50) must be within [0, 0]!
Signed-off-by: Yang Wang <kevinyang.wang@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit ab4905d466)
Cc: stable@vger.kernel.org
In kfd_ioctl_create_process(), the pointer 'p' is used before checking
if it is NULL.
The code accesses p->context_id before validating 'p'. This can lead
to a possible NULL pointer dereference.
Move the NULL check before using 'p' so that the pointer is validated
before access.
Fixes the below:
drivers/gpu/drm/amd/amdgpu/../amdkfd/kfd_chardev.c:3177 kfd_ioctl_create_process() warn: variable dereferenced before check 'p' (see line 3174)
Fixes: cc6b66d661 ("amdkfd: introduce new ioctl AMDKFD_IOC_CREATE_PROCESS")
Cc: Zhu Lingshan <lingshan.zhu@amd.com>
Cc: Felix Kuehling <felix.kuehling@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 19d4149b22)
LVDS connectors don't have extended backlight caps so check
if the pointer is valid before accessing it.
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/5012
Fixes: 1454642960 ("drm/amd: Re-introduce property to control adaptive backlight modulation")
Cc: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Mario Limonciello (AMD) <superm1@kernel.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 3f797396d7)
Cc: stable@vger.kernel.org
amdgpu_amdkfd_submit_ib() submits a GPU job and gets a fence
from amdgpu_ib_schedule(). This fence is used to wait for job
completion.
Currently, the code drops the fence reference using dma_fence_put()
before calling dma_fence_wait().
If dma_fence_put() releases the last reference, the fence may be
freed before dma_fence_wait() is called. This can lead to a
use-after-free.
Fix this by waiting on the fence first and releasing the reference
only after dma_fence_wait() completes.
Fixes the below:
drivers/gpu/drm/amd/amdgpu/amdgpu_amdkfd.c:697 amdgpu_amdkfd_submit_ib() warn: passing freed memory 'f' (line 696)
Fixes: 9ae55f030d ("drm/amdgpu: Follow up change to previous drm scheduler change.")
Cc: Felix Kuehling <Felix.Kuehling@amd.com>
Cc: Dan Carpenter <dan.carpenter@linaro.org>
Cc: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 8b9e5259ad)
gcc sometimes fails to analyse how two local variables in ntfs_write_bh()
are initialized, as the initialization happens only in the first pass
through the main loop:
fs/ntfs3/fsntfs.c: In function 'ntfs_write_bh':
fs/ntfs3/fsntfs.c:1443:17: error: 'fixup' may be used uninitialized [-Werror=maybe-uninitialized]
1443 | __le16 *fixup;
| ^~~~~
fs/ntfs3/fsntfs.c:1443:17: note: 'fixup' was declared here
1443 | __le16 *fixup;
| ^~~~~
fs/ntfs3/fsntfs.c:1487:30: error: 'sample' may be used uninitialized [-Werror=maybe-uninitialized]
1487 | *ptr = sample;
| ~~~~~^~~~~~~~
fs/ntfs3/fsntfs.c:1444:16: note: 'sample' was declared here
1444 | __le16 sample;
Initializing the two variables to bogus values shuts up the warning and
makes it clear that those cannot be used. I tried rearranging the loop to
move the initialization in front of it, but couldn't quite figure it out.
Fixes: 48d9b57b16 ("fs/ntfs3: add a subset of W=1 warnings for stricter checks")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
When a compressed or sparse attribute has its clusters frame-aligned,
vcn is rounded down to the frame start using cmask, which can result
in vcn != vcn0. In this case, vcn and vcn0 may reside in different
attribute segments.
The code already handles the case where vcn is in a different segment
by loading its runs before allocation. However, it fails to load runs
for vcn0 when vcn0 resides in a different segment than vcn. This causes
run_lookup_entry() to return SPARSE_LCN for vcn0 since its segment was
never loaded into the in-memory run list, triggering the WARN_ON(1).
Fix this by adding a missing check for vcn0 after the existing vcn
segment check. If vcn0 falls outside the current segment range
[svcn, evcn1), find and load the attribute segment containing vcn0
before performing the run lookup.
The following scenario triggers the bug:
attr_data_get_block_locked()
vcn = vcn0 & cmask <- vcn != vcn0 after frame alignment
load runs for vcn segment <- vcn0 segment not loaded!
attr_allocate_clusters() <- allocation succeeds
run_lookup_entry(vcn0) <- vcn0 not in run -> SPARSE_LCN
WARN_ON(1) <- bug fires here!
Reported-by: syzbot+c1e9aedbd913fadad617@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=c1e9aedbd913fadad617
Fixes: c380b52f6c ("fs/ntfs3: Change new sparse cluster processing")
Signed-off-by: Deepanshu Kartikey <Kartikey406@gmail.com>
Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
This patch increases the size of the CLIENT_REC name field from 32 utf-16
chars to 64 utf-16 chars. It fixes the buffer overflow problem in
log_replay() reported by Robbert Morris.
Reported-by: <rtm@csail.mit.edu>
Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
When ec_install_handlers() returns -EPROBE_DEFER on reduced-hardware
platforms, it has already started the EC and installed the address
space handler with the struct acpi_ec pointer as handler context.
However, acpi_ec_setup() propagates the error without any cleanup.
The caller acpi_ec_add() then frees the struct acpi_ec for non-boot
instances, leaving a dangling handler context in ACPICA.
Any subsequent AML evaluation that accesses an EC OpRegion field
dispatches into acpi_ec_space_handler() with the freed pointer,
causing a use-after-free:
BUG: KASAN: slab-use-after-free in mutex_lock (kernel/locking/mutex.c:289)
Write of size 8 at addr ffff88800721de38 by task init/1
Call Trace:
<TASK>
mutex_lock (kernel/locking/mutex.c:289)
acpi_ec_space_handler (drivers/acpi/ec.c:1362)
acpi_ev_address_space_dispatch (drivers/acpi/acpica/evregion.c:293)
acpi_ex_access_region (drivers/acpi/acpica/exfldio.c:246)
acpi_ex_field_datum_io (drivers/acpi/acpica/exfldio.c:509)
acpi_ex_extract_from_field (drivers/acpi/acpica/exfldio.c:700)
acpi_ex_read_data_from_field (drivers/acpi/acpica/exfield.c:327)
acpi_ex_resolve_node_to_value (drivers/acpi/acpica/exresolv.c:392)
</TASK>
Allocated by task 1:
acpi_ec_alloc (drivers/acpi/ec.c:1424)
acpi_ec_add (drivers/acpi/ec.c:1692)
Freed by task 1:
kfree (mm/slub.c:6876)
acpi_ec_add (drivers/acpi/ec.c:1751)
The bug triggers on reduced-hardware EC platforms (ec->gpe < 0)
when the GPIO IRQ provider defers probing. Once the stale handler
exists, any unprivileged sysfs read that causes AML to touch an
EC OpRegion (battery, thermal, backlight) exercises the dangling
pointer.
Fix this by calling ec_remove_handlers() in the error path of
acpi_ec_setup() before clearing first_ec. ec_remove_handlers()
checks each EC_FLAGS_* bit before acting, so it is safe to call
regardless of how far ec_install_handlers() progressed:
-ENODEV (handler not installed): only calls acpi_ec_stop()
-EPROBE_DEFER (handler installed): removes handler, stops EC
Fixes: 03e9a0e057 ("ACPI: EC: Consolidate event handler installation code")
Reported-by: Xiang Mei <xmei5@asu.edu>
Signed-off-by: Weiming Shi <bestswngs@gmail.com>
Link: https://patch.msgid.link/20260324165458.1337233-2-bestswngs@gmail.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
In most real-life cases, 0-length bitmap provided by user is a sign of
an error. The API doesn't provide any guarantees on returned value, and
the bitmap pointers are not dereferenced.
Signed-off-by: Yury Norov <ynorov@nvidia.com>
For link encoders without HPD (analog or LVDS), add a
link_encoder_funcs structure with no hpd enable callbacks.
The enable and disable hpd callbacks are currently not used
outside of a special case in debugfs which checks if the hpd
is valid before using it, but this will protect us if they
ever are.
Reviewed-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Reorganise the amdgpu_eviction_fence_suspend_worker code so
schedule_delayed_work is the last thing we do after amdgpu_userq_evict
is complete and the eviction fence is signalled.
Suggested-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Sunil Khatri <sunil.khatri@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
There is a declaration statement that has a ;; at the end, remove the
extraneous ;
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
LVDS does not use an HPD pin so it may be invalid. Handle
this case correctly in link encoder creation.
Fixes: 7c8fb3b8e9 ("drm/amd/display: Add hpd_source index check for DCE60/80/100/110/112/120 link encoders")
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/5012
Cc: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Cc: Roman Li <roman.li@amd.com>
Reviewed-by: Roman Li <roman.li@amd.com>
Reviewed-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The function amdgpu_fence_driver_init() was renamed to
amdgpu_fence_driver_sw_init() by commit 067f44c8b4
("drm/amdgpu: avoid over-handle of fence driver fini in s3
test (v2)"). Update the stale reference in the
amdgpu_fence_driver_init_ring() kdoc.
Assisted-by: unnamed:deepseek-v3.2 coccinelle
Signed-off-by: Kexin Sun <kexinsun@smail.nju.edu.cn>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Using a ',' in place of a ';' can have unintended side effects.
Although that is not the case here, it seems best to use ';'
unless ',' is intended.
Found by inspection.
No functional change intended.
Compile tested only.
Signed-off-by: Chen Ni <nichen@iscas.ac.cn>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
During a GPU page fault, the driver restores the SVM range and then maps it
into the GPU page tables. The current implementation passes a GPU-page-size
(4K-based) PFN to svm_range_restore_pages() to restore the range.
SVM ranges are tracked using system-page-size PFNs. On systems where the
system page size is larger than 4K, using GPU-page-size PFNs to restore the
range causes two problems:
Range lookup fails:
Because the restore function receives PFNs in GPU (4K) units, the SVM
range lookup does not find the existing range. This will result in a
duplicate SVM range being created.
VMA lookup failure:
The restore function also tries to locate the VMA for the faulting address.
It converts the GPU-page-size PFN into an address using the system page
size, which results in an incorrect address on non-4K page-size systems.
As a result, the VMA lookup fails with the message: "address 0xxxx VMA is
removed".
This patch passes the system-page-size PFN to svm_range_restore_pages() so
that the SVM range is restored correctly on non-4K page systems.
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Donet Tom <donettom@linux.ibm.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The function vblank_control_worker() was renamed
to amdgpu_dm_crtc_vblank_control_worker() by commit
6ce4f9ee25 ("drm/amd/display: Add prefix to amdgpu crtc
functions"). Update the two stale references in
amdgpu_dm.c.
Assisted-by: unnamed:deepseek-v3.2 coccinelle
Signed-off-by: Kexin Sun <kexinsun@smail.nju.edu.cn>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
