The list of buffers (`rzv2h_ivc::buffers.queue`) is protected by a
spinlock (`rzv2h_ivc::buffers.lock`). However, in
`rzv2h_ivc_transfer_buffer()`, which runs in a separate workqueue, the
`list_del()` call is executed without holding the spinlock, which makes
it possible for the list to be concurrently modified
Fix that by removing a buffer from the list in the lock protected section.
Cc: stable@vger.kernel.org
Fixes: f0b3984d82 ("media: platform: Add Renesas Input Video Control block driver")
Reviewed-by: Daniel Scally <dan.scally@ideasonboard.com>
Signed-off-by: Barnabás Pőcze <barnabas.pocze+renesas@ideasonboard.com>
[assign ivc->buffers.curr in critical section as reported by Barnabas]
Signed-off-by: Jacopo Mondi <jacopo.mondi+renesas@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Bit 20 should be written in this register to stop frame processing.
So fix that, as well as the poll condition.
Cc: stable@vger.kernel.org
Fixes: f0b3984d82 ("media: platform: Add Renesas Input Video Control block driver")
Reviewed-by: Daniel Scally <dan.scally@ideasonboard.com>
Signed-off-by: Barnabás Pőcze <barnabas.pocze+renesas@ideasonboard.com>
Signed-off-by: Jacopo Mondi <jacopo.mondi+renesas@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
The documentation prescribes that invalid formats should not be set,
so do a single write to ensure that both the CLFMT and DTYPE fields
are set to valid values.
Cc: stable@vger.kernel.org
Fixes: f0b3984d82 ("media: platform: Add Renesas Input Video Control block driver")
Reviewed-by: Daniel Scally <dan.scally@ideasonboard.com>
Signed-off-by: Barnabás Pőcze <barnabas.pocze+renesas@ideasonboard.com>
Signed-off-by: Jacopo Mondi <jacopo.mondi+renesas@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
According to the documentation there are writable reserved bits in the
register and those should not be set to 0. So use `rzv2h_ivc_update_bits()`
with a proper bitmask.
Cc: stable@vger.kernel.org
Fixes: f0b3984d82 ("media: platform: Add Renesas Input Video Control block driver")
Reviewed-by: Daniel Scally <dan.scally@ideasonboard.com>
Signed-off-by: Barnabás Pőcze <barnabas.pocze+renesas@ideasonboard.com>
Signed-off-by: Jacopo Mondi <jacopo.mondi+renesas@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
The vertical blanking settings for the IVC block are dependent on
settings in the ISP. This was originally set to calculate as the
worst-case possible value, but it seems that this can cause the IVC
block to hang. Instead calculate the vblank to match the default
settings (which are currently all the driver sets anyway).
Cc: stable@vger.kernel.org
Fixes: f0b3984d82 ("media: platform: Add Renesas Input Video Control block driver")
Signed-off-by: Daniel Scally <dan.scally+renesas@ideasonboard.com>
Signed-off-by: Jacopo Mondi <jacopo.mondi+renesas@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
The Purple Fringe Correction module is enabled by default with a POR
configuration which might not be correct for the lens/sensor combination
in use.
If the Purple Fringe Correction module has to be used, it needs to be
supported in the driver's uAPI and properly configured by userspace.
As the driver doesn't support it at the moment, bypass it by default.
Reviewed-by: Barnabás Pőcze <barnabas.pocze@ideasonboard.com>
Reviewed-by: Daniel Scally <dan.scally@ideasonboard.com>
Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
The Iridix Tonemap engine, if not bypassed, applies a digital gain
in order to compensate under-exposed images.
This however breaks the exposure and gain regulation performed on the
sensor.
If the Iridix Tonemap has to be used, it need to be supported in the
ISP uAPI and properly configured by userspace.
As the driver doesn't support it at the moment, bypass it by default.
Reviewed-by: Barnabás Pőcze <barnabas.pocze@ideasonboard.com>
Reviewed-by: Daniel Scally <dan.scally@ideasonboard.com>
Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
The Mali C55 Iridix block has a digital gain function and tone mapping
function, whose enablement is controlled by two different bits
in the BYPASS_3 register.
Unfortunately, the "Gain" and "Tonemap" bypass bit definitions are the
wrong way around. Swap them.
Cc: stable@vger.kernel.org
Fixes: d5f281f3dd ("media: mali-c55: Add Mali-C55 ISP driver")
Signed-off-by: Daniel Scally <dan.scally@ideasonboard.com>
Reviewed-by: Barnabás Pőcze <barnabas.pocze@ideasonboard.com>
Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
The Mali C55 driver uses an auto-suspend delay of 2000 milli-seconds.
As the delay is quite large, it is certainly possible that two
consecutive calls to enable_streams() do not go through a suspend of the
peripheral, meaning we cannot rely on POW register values for the ISP
configuration.
To prevent a streaming session to be initialized with settings from the
previous one, reset the full ISP configuration to know state disabling or
bypassing all the ISP blocks the driver supports.
Cc: stable@vger.kernel.org
Fixes: d5f281f3dd ("media: mali-c55: Add Mali-C55 ISP driver")
Reviewed-by: Daniel Scally <dan.scally@ideasonboard.com>
Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
The Mali C55 driver initializes the ISP in two points:
1) At probe time it disables ISP blocks by configuring them in bypass
mode
2) At enable_streams() it initializes the crop rectangles and the image
processing pipeline using the current image format
However, as ISP blocks are configured by userspace, if their
configuration is not reset, from the second enable_streams() call
onwards the ISP configuration will depend on the previous streaming
session configuration.
To re-initialize the ISP completely at enable_streams() time consolidate
the ISP block bypass configuration and the image processing path
configuration in a single function to be called at enabled_streams()
time.
Cc: stable@vger.kernel.org
Fixes: d5f281f3dd ("media: mali-c55: Add Mali-C55 ISP driver")
Reviewed-by: Daniel Scally <dan.scally@ideasonboard.com>
Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Some bad copy&paste happened in the description of the ISP block types
and AWB_CONFIG got mixed up with SHADING_CONFIG.
Fix it by assigning to each block the correct type.
As only the comment is changed, there is no uABI breakage or regression.
Cc: stable@vger.kernel.org
Fixes: d5f281f3dd ("media: mali-c55: Add Mali-C55 ISP driver")
Reviewed-by: Daniel Scally <dan.scally@ideasonboard.com>
Reviewed-by: Barnabás Pőcze <barnabas.pocze@ideasonboard.com>
Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Wenyuan Li <2063309626@qq.com> says:
The driver currently ignores the return values of several I2C operations
during register writes, which could lead to silent failures and
inconsistent device state.
Link: https://patch.msgid.link/tencent_579D057AC557914CF739A2D9EAD045CE7306@qq.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Convert existing debug and error prints to dev_err() to provide better
diagnostic information. Use the %pe format specifier to print
human-readable error strings for I2C failures.
Signed-off-by: Wenyuan Li <2063309626@qq.com>
Link: https://patch.msgid.link/tencent_A26B55F062F2B9C282A142BFC8BCDB1B9105@qq.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The driver currently ignores the return values of several I2C operations
during register writes, which could lead to silent failures and
inconsistent device state.
Fix this by:
- Moving variable declarations to the beginning of the function (C90).
- Checking the return value of every i2c_master_send() and recv() call.
- Returning the actual error code if it's negative, or -EIO if the
transfer was incomplete.
Signed-off-by: Wenyuan Li <2063309626@qq.com>
Link: https://patch.msgid.link/tencent_579D057AC557914CF739A2D9EAD045CE7306@qq.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The memcpy function assumes the dynamic array notif->matches is at least
as large as the number of bytes to copy. Otherwise, results->matches may
contain unwanted data. To guarantee safety, extend the validation in one
of the checks to ensure sufficient packet length.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Cc: stable@vger.kernel.org
Fixes: 5ac54afd4d ("wifi: iwlwifi: mvm: Add handling for scan offload match info notification")
Signed-off-by: Alexey Velichayshiy <a.velichayshiy@ispras.ru>
Link: https://patch.msgid.link/20260207150335.1013646-1-a.velichayshiy@ispras.ru
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
When a driver is probed through __driver_attach(), the bus' match()
callback is called without the device lock held, thus accessing the
driver_override field without a lock, which can cause a UAF.
Fix this by using the driver-core driver_override infrastructure taking
care of proper locking internally.
Note that calling match() from __driver_attach() without the device lock
held is intentional. [1]
Also note that we do not enable the driver_override feature of struct
bus_type, as SPI - in contrast to most other buses - passes "" to
sysfs_emit() when the driver_override pointer is NULL. Thus, printing
"\n" instead of "(null)\n".
Link: https://lore.kernel.org/driver-core/DGRGTIRHA62X.3RY09D9SOK77P@kernel.org/ [1]
Reported-by: Gui-Dong Han <hanguidong02@gmail.com>
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=220789
Fixes: 5039563e7c ("spi: Add driver_override SPI device attribute")
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
Link: https://patch.msgid.link/20260324005919.2408620-12-dakr@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
cputemp_is_visible() validates the channel index against
CPUTEMP_CHANNEL_NUMS, but currently uses '>' instead of '>='.
As a result, channel == CPUTEMP_CHANNEL_NUMS is not rejected even though
valid indices are 0 .. CPUTEMP_CHANNEL_NUMS - 1.
Fix the bounds check by using '>=' so invalid channel indices are
rejected before indexing the core bitmap.
Fixes: bf3608f338 ("hwmon: peci: Add cputemp driver")
Cc: stable@vger.kernel.org
Signed-off-by: Sanman Pradhan <psanman@juniper.net>
Link: https://lore.kernel.org/r/20260323002352.93417-3-sanman.pradhan@hpe.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
The hwmon sysfs ABI expects tempN_crit_hyst to report the temperature at
which the critical condition clears, not the hysteresis delta from the
critical limit.
The peci cputemp driver currently returns tjmax - tcontrol for
crit_hyst_type, which is the hysteresis margin rather than the
corresponding absolute temperature.
Return tcontrol directly, and update the documentation accordingly.
Fixes: bf3608f338 ("hwmon: peci: Add cputemp driver")
Cc: stable@vger.kernel.org
Signed-off-by: Sanman Pradhan <psanman@juniper.net>
Link: https://lore.kernel.org/r/20260323002352.93417-2-sanman.pradhan@hpe.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
The custom avs0_enable and avs1_enable sysfs attributes access PMBus
registers through the exported API helpers (pmbus_read_byte_data,
pmbus_read_word_data, pmbus_write_word_data, pmbus_update_byte_data)
without holding the PMBus update_lock mutex. These exported helpers do
not acquire the mutex internally, unlike the core's internal callers
which hold the lock before invoking them.
The store callback is especially vulnerable: it performs a multi-step
read-modify-write sequence (read VOUT_COMMAND, write VOUT_COMMAND, then
update OPERATION) where concurrent access from another thread could
interleave and corrupt the register state.
Add pmbus_lock_interruptible()/pmbus_unlock() around both the show and
store callbacks to serialize PMBus register access with the rest of the
driver.
Fixes: 038a9c3d1e ("hwmon: (pmbus/isl68137) Add driver for Intersil ISL68137 PWM Controller")
Cc: stable@vger.kernel.org
Signed-off-by: Sanman Pradhan <psanman@juniper.net>
Link: https://lore.kernel.org/r/20260319173055.125271-3-sanman.pradhan@hpe.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
ina233_read_word_data() reads MFR_READ_VSHUNT via pmbus_read_word_data()
but has two issues:
1. The return value is not checked for errors before being used in
arithmetic. A negative error code from a failed I2C transaction is
passed directly to DIV_ROUND_CLOSEST(), producing garbage data.
2. MFR_READ_VSHUNT is a 16-bit two's complement value. Negative shunt
voltages (values with bit 15 set) are treated as large positive
values since pmbus_read_word_data() returns them zero-extended in an
int. This leads to incorrect scaling in the VIN coefficient
conversion.
Fix both issues by adding an error check, casting to s16 for proper
sign extension, and clamping the result to a valid non-negative range.
The clamp is necessary because read_word_data callbacks must return
non-negative values on success (negative values indicate errors to the
pmbus core).
Fixes: b64b6cb163 ("hwmon: Add driver for TI INA233 Current and Power Monitor")
Cc: stable@vger.kernel.org
Signed-off-by: Sanman Pradhan <psanman@juniper.net>
Link: https://lore.kernel.org/r/20260319173055.125271-2-sanman.pradhan@hpe.com
[groeck: Fixed clamp to avoid losing the sign bit]
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
of_parse_phandle() returns a device_node reference that must be released with
of_node_put(). The original code never freed r5_core_node on any exit path,
causing a memory leak.
Fix this by using the automatic cleanup attribute __free(device_node) which
ensures of_node_put() is called when the variable goes out of scope.
Fixes: d5fe2fec6c ("EDAC: Add a driver for the AMD Versal NET DDR controller")
Signed-off-by: Felix Gu <ustc.gu@gmail.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Shubhrajyoti Datta <shubhrajyoti.datta@amd.com>
Cc: <stable@kernel.org>
Link: https://patch.msgid.link/20260323-versalnet-v1-1-4ab3012635ef@gmail.com
For both ath11k and ath12k use the correct TID when stopping an AMPDU
session.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQQ/mtSHzPUi16IfDEksFbugiYzLewUCacKcFAAKCRAsFbugiYzL
e9lMAP4lBqV3crt3DezGOH1KTdZqTW+Uh48ATxI7s+INF3fcTgEAufKvug/WthS+
nBMNWB6vTVGrdts/eqiU74IKeiaJWAQ=
=8/DD
-----END PGP SIGNATURE-----
Merge tag 'ath-current-20260324' of git://git.kernel.org/pub/scm/linux/kernel/git/ath/ath
Jeff Johnson says:
==================
ath.git update for v7.0-rc6
For both ath11k and ath12k use the correct TID when stopping an AMPDU
session.
==================
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
- Fix MLO scan timing (record the scan start in FW)
- don't send a 6E related command when not supported
- correctly set wifi generation data
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQQM3A3Pv7vbm9vtjWbacY7uyt+OfQUCacJ9dQAKCRDacY7uyt+O
fUJjAQCq86IUYN2b3UuYnN2yD3wq/HgqL1BdiMnCnu7HdeUQjAD/RDMpK9CThJqI
CsRZ3Uy6jEJTjg1o2eRBxmQhy2ouCAw=
=q/o0
-----END PGP SIGNATURE-----
Merge tag 'iwlwifi-fixes-2026-03-24' of https://git.kernel.org/pub/scm/linux/kernel/git/iwlwifi/iwlwifi-next
Miri Korenblit says:
====================
wifi: iwlwifi: fixes - 2026-03-24
- Fix MLO scan timing (record the scan start in FW)
- don't send a 6E related command when not supported
- correctly set wifi generation data
====================
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
wl1251_tx_packet_cb() uses the firmware completion ID directly to index
the fixed 16-entry wl->tx_frames[] array. The ID is a raw u8 from the
completion block, and the callback does not currently verify that it
fits the array before dereferencing it.
Reject completion IDs that fall outside wl->tx_frames[] and keep the
existing NULL check in the same guard. This keeps the fix local to the
trust boundary and avoids touching the rest of the completion flow.
Signed-off-by: Pengpeng Hou <pengpeng@iscas.ac.cn>
Link: https://patch.msgid.link/20260323080845.40033-1-pengpeng@iscas.ac.cn
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The variable valuesize is declared as u8 but accumulates the total
length of all SSIDs to scan. Each SSID contributes up to 33 bytes
(IEEE80211_MAX_SSID_LEN + 1), and with WILC_MAX_NUM_PROBED_SSID (10)
SSIDs the total can reach 330, which wraps around to 74 when stored
in a u8.
This causes kmalloc to allocate only 75 bytes while the subsequent
memcpy writes up to 331 bytes into the buffer, resulting in a 256-byte
heap buffer overflow.
Widen valuesize from u8 to u32 to accommodate the full range.
Fixes: c5c77ba18e ("staging: wilc1000: Add SDIO/SPI 802.11 driver")
Cc: stable@vger.kernel.org
Signed-off-by: Yasuaki Torimaru <yasuakitorimaru@gmail.com>
Link: https://patch.msgid.link/20260324100624.983458-1-yasuakitorimaru@gmail.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
When sync init is used and the server exits for some reason (error, crash)
while processing FUSE_INIT, the filesystem creation will hang. The reason
is that while all other threads will exit, the mounting thread (or process)
will keep the device fd open, which will prevent an abort from happening.
This is a regression from the async mount case, where the mount was done
first, and the FUSE_INIT processing afterwards, in which case there's no
such recursive syscall keeping the fd open.
Fixes: dfb84c3307 ("fuse: allow synchronous FUSE_INIT")
Cc: stable@vger.kernel.org # v6.18
Reviewed-by: Joanne Koong <joannelkoong@gmail.com>
Reviewed-by: Bernd Schubert <bernd@bsbernd.com>
Reviewed-by: "Darrick J. Wong" <djwong@kernel.org>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Johan Hovold <johan@kernel.org> says:
The SPI subsystem frees the controller and any subsystem allocated
driver data as part of deregistration (unless the allocation is device
managed).
This series fixes the IMX driver that got this wrong and then converts
it to use device managed allocation.
Included are also a (preparatory) deregistration fix for the rockchip
driver and related cleanups for the tegre20-slink and rockchip drivers
that both take a controller reference during unbind.
Switch to device managed controller allocation to simplify error
handling and to avoid having to take another reference during
deregistration.
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://patch.msgid.link/20260324082326.901043-6-johan@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Switch to device managed controller allocation to simplify error
handling and to avoid having to take another reference during
deregistration.
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://patch.msgid.link/20260324082326.901043-5-johan@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Switch to device managed controller allocation to simplify error
handling and to avoid having to take another reference during
deregistration.
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://patch.msgid.link/20260324082326.901043-4-johan@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Make sure to deregister the controller before freeing underlying
resources like DMA channels during driver unbind.
Fixes: 64e36824b3 ("spi/rockchip: add driver for Rockchip RK3xxx SoCs integrated SPI")
Cc: stable@vger.kernel.org # 3.17
Cc: addy ke <addy.ke@rock-chips.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://patch.msgid.link/20260324082326.901043-3-johan@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The SPI subsystem frees the controller and any subsystem allocated
driver data as part of deregistration (unless the allocation is device
managed).
Take another reference before deregistering the controller so that the
driver data is not freed until the driver is done with it.
Fixes: 307c897db7 ("spi: spi-imx: replace struct spi_imx_data::bitbang by pointer to struct spi_controller")
Cc: stable@vger.kernel.org # 5.19
Acked-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://patch.msgid.link/20260324082326.901043-2-johan@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
-----BEGIN PGP SIGNATURE-----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=E39n
-----END PGP SIGNATURE-----
Merge tag 'ipsec-2026-03-23' of git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec
Steffen Klassert says:
====================
pull request (net): ipsec 2026-03-23
1) Add missing extack for XFRMA_SA_PCPU in add_acquire and allocspi.
From Sabrina Dubroca.
2) Fix the condition on x->pcpu_num in xfrm_sa_len by using the
proper check. From Sabrina Dubroca.
3) Call xdo_dev_state_delete during state update to properly cleanup
the xdo device state. From Sabrina Dubroca.
4) Fix a potential skb leak in espintcp when async crypto is used.
From Sabrina Dubroca.
5) Validate inner IPv4 header length in IPTFS payload to avoid
parsing malformed packets. From Roshan Kumar.
6) Fix skb_put() panic on non-linear skb during IPTFS reassembly.
From Fernando Fernandez Mancera.
7) Silence various sparse warnings related to RCU, state, and policy
handling. From Sabrina Dubroca.
8) Fix work re-schedule race after cancel in xfrm_nat_keepalive_net_fini().
From Hyunwoo Kim.
9) Prevent policy_hthresh.work from racing with netns teardown by using
a proper cleanup mechanism. From Minwoo Ra.
10) Validate that the family of the source and destination addresses match
in pfkey_send_migrate(). From Eric Dumazet.
11) Only publish mode_data after the clone is setup in the IPTFS receive path.
This prevents leaving x->mode_data pointing at freed memory on error.
From Paul Moses.
Please pull or let me know if there are problems.
ipsec-2026-03-23
* tag 'ipsec-2026-03-23' of git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec:
xfrm: iptfs: only publish mode_data after clone setup
af_key: validate families in pfkey_send_migrate()
xfrm: prevent policy_hthresh.work from racing with netns teardown
xfrm: Fix work re-schedule after cancel in xfrm_nat_keepalive_net_fini()
xfrm: avoid RCU warnings around the per-netns netlink socket
xfrm: add rcu_access_pointer to silence sparse warning for xfrm_input_afinfo
xfrm: policy: silence sparse warning in xfrm_policy_unregister_afinfo
xfrm: policy: fix sparse warnings in xfrm_policy_{init,fini}
xfrm: state: silence sparse warnings during netns exit
xfrm: remove rcu/state_hold from xfrm_state_lookup_spi_proto
xfrm: state: add xfrm_state_deref_prot to state_by* walk under lock
xfrm: state: fix sparse warnings around XFRM_STATE_INSERT
xfrm: state: fix sparse warnings in xfrm_state_init
xfrm: state: fix sparse warnings on xfrm_state_hold_rcu
xfrm: iptfs: fix skb_put() panic on non-linear skb during reassembly
xfrm: iptfs: validate inner IPv4 header length in IPTFS payload
esp: fix skb leak with espintcp and async crypto
xfrm: call xdo_dev_state_delete during state update
xfrm: fix the condition on x->pcpu_num in xfrm_sa_len
xfrm: add missing extack for XFRMA_SA_PCPU in add_acquire and allocspi
====================
Link: https://patch.msgid.link/20260323083440.2741292-1-steffen.klassert@secunet.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Build the kernel with make W=1 generates the following warning:
arch/x86/events/intel/p4.c: In function ‘p4_pmu_init’:
arch/x86/events/intel/p4.c:1370:27: error: variable ‘high’ set but not used [-Werror=unused-but-set-variable]
1370 | unsigned int low, high;
| ^~~~
This happens because, although both variables are declared and
initialized by rdmsr, only `low` is used in the subsequent if statement.
This patch uses the rdmsrq() macro instead of the rdmsr() macro.
The rdmsrq() macro avoids the use of high and low variables
because it reads the msr value in a single u64 variable.
Also, replace (1 << 7) with the proper macro.
Running `make W=1` again resolves the error.
I was unable to test the patch because
i do not have the hardware.
Suggested-by: Dave Hansen <dave.hansen@linux.intel.com>
Signed-off-by: Aldo Conte <aldocontelk@gmail.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://patch.msgid.link/20260320112302.281549-1-aldocontelk@gmail.com
When enabling Context Analysis (CONTEXT_ANALYSIS := y) in arch/x86/kvm
code, Clang's Thread Safety Analysis failed to recognize that identical
per_cpu() accesses refer to the same lock:
| CC [M] arch/x86/kvm/vmx/posted_intr.o
| arch/x86/kvm/vmx/posted_intr.c:186:2: error: releasing raw_spinlock '__ptr + __per_cpu_offset[vcpu->cpu]' that was not held [-Werror,-Wthread-safety-analysis]
| 186 | raw_spin_unlock(&per_cpu(wakeup_vcpus_on_cpu_lock, vcpu->cpu));
| | ^
| ./include/linux/spinlock.h:276:32: note: expanded from macro 'raw_spin_unlock'
| 276 | #define raw_spin_unlock(lock) _raw_spin_unlock(lock)
| | ^
| arch/x86/kvm/vmx/posted_intr.c:207:1: error: raw_spinlock '__ptr + __per_cpu_offset[vcpu->cpu]' is still held at the end of function [-Werror,-Wthread-safety-analysis]
| 207 | }
| | ^
| arch/x86/kvm/vmx/posted_intr.c:182:2: note: raw_spinlock acquired here
| 182 | raw_spin_lock_nested(&per_cpu(wakeup_vcpus_on_cpu_lock, vcpu->cpu),
| | ^
| ./include/linux/spinlock.h:235:2: note: expanded from macro 'raw_spin_lock_nested'
| 235 | _raw_spin_lock(((void)(subclass), (lock)))
| | ^
| 2 errors generated.
This occurred because the default RELOC_HIDE() implementation (used by
the per-CPU macros) is a statement expression containing an intermediate
'unsigned long' variable (this version appears to predate Git history).
While the analysis strips away inner casts when resolving pointer
aliases, it stops when encountering intermediate non-pointer variables
(this is Thread Safety Analysis specific and irrelevant for codegen).
This prevents the analysis from concluding that the pointers passed to
e.g. raw_spin_lock() and raw_spin_unlock() were identical when per-CPU
accessors are used.
Simplify RELOC_HIDE() to a single expression. This preserves the intent
of obfuscating UB-introducing out-of-bounds pointer calculations from
the compiler via the 'unsigned long' cast, but allows the alias analysis
to successfully resolve the pointers.
Using a recent Clang version, I observe that generated code remains the
same for vmlinux; the intermediate variable was already being optimized
away (for any respectable modern compiler, not doing so would be an
optimizer bug). Note that GCC provides its own version of RELOC_HIDE(),
so this change only affects Clang builds.
Add a test case to lib/test_context-analysis.c to catch any regressions.
Reported-by: Bart Van Assche <bvanassche@acm.org>
Reported-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Marco Elver <elver@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Link: https://lore.kernel.org/all/e3946223-4543-4a76-a328-9c6865e95192@acm.org/
Link: https://patch.msgid.link/20260319135245.1420780-1-elver@google.com
>From hardware implementation perspective, a guest tegra241-cmdqv hardware
is different than the host hardware:
- Host HW is backed by a VINTF (HYP_OWN=1)
- Guest HW is backed by a VINTF (HYP_OWN=0)
The kernel driver has an implementation requirement of the HYP_OWN bit in
the VM. So, VMM must follow that to allow the same copy of Linux to work.
Add this requirement to the uAPI, which is currently missing.
Fixes: 4dc0d12474 ("iommu/tegra241-cmdqv: Add user-space use support")
Signed-off-by: Nicolin Chen <nicolinc@nvidia.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Will Deacon <will@kernel.org>
vintf->hyp_own is finalized in tegra241_vintf_hw_init(). On the other hand,
tegra241_vcmdq_alloc_smmu_cmdq() is called via an init_structures callback,
which is earlier than tegra241_vintf_hw_init().
This results in the supports_cmd op always being set to the guest function,
although this doesn't break any functionality nor have some noticeable perf
impact since non-invalidation commands are not issued in the perf sensitive
context.
Fix this by moving supports_cmd to tegra241_vcmdq_hw_init().
After this change,
- For a guest kernel, this will be a status quo
- For a host kernel, non-invalidation commands will be issued to VCMDQ(s)
Fixes: a9d40285bd ("iommu/tegra241-cmdqv: Limit CMDs for VCMDQs of a guest owned VINTF")
Reported-by: Eric Auger <eric.auger@redhat.com>
Reported-by: Shameer Kolothum <skolothumtho@nvidia.com>
Closes: https://lore.kernel.org/qemu-devel/CH3PR12MB754836BEE54E39B30C7210C0AB44A@CH3PR12MB7548.namprd12.prod.outlook.com/
Signed-off-by: Nicolin Chen <nicolinc@nvidia.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Tested-by: Shameer Kolothum <skolothumtho@nvidia.com>
Signed-off-by: Will Deacon <will@kernel.org>
The plan is to move all the mmio stuff into the display code itself.
As a first step implement the register polling in intel_de.c.
Currently i915 and xe implement this stuff in slightly different
ways, so there are some functional changes here. Try to go for a
reasonable middle ground between the i915 and xe implementations:
- the exponential backoff limit is the simpler approach taken
by i915 (== just clamp the max sleep duration to 1 ms)
- the fast vs. slow timeout handling is similar to i915 where
we first try the fast timeout and then again the slow timeout
if the condition still isn't satisfied. xe just adds up the
timeouts together, which is a bit weird.
- the atomic wait variant uses udelay() like xe, whereas i915
has no udelay()s in its atomic loop. As a compromise go for a
fixed 1 usec delay for short waits, instead of the somewhat
peculiar xe behaviour where it effectively just does one
iteration of the loop.
- keep the "use udelay() for < 10 usec waits" logic (which
more or less mirrors fsleep()), but include an explicit
might_sleep() even for these short waits when called from
a non-atomic intel_de_wait*() function. This should prevent
people from calling the non-atomic functions from the wrong
place.
Eventually we may want to switch over to poll_timeout*(),
but that lacks the exponential backoff, so a bit too
radical to change in one go.
v2: Initialize ret in intel_de_wait_for_register() to avoid a
warning from the compiler. This is actually a false positive
since we always have fast_timeout_us!=0 when slow_timeout_us!=0,
but the compiler can't see that
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patch.msgid.link/20260323094304.8171-1-ville.syrjala@linux.intel.com
intel_de_wait*() end up doing quite a bit of stuff, so the one
function call overhead from them seems insignificant. Move the
implementation intel_de.c.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patch.msgid.link/20260313111028.25159-3-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
intel_de_{read,write}8() aren't performance critical so having them
as static inline is pointless. Introduce intel_de.c and move the
implementation there.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patch.msgid.link/20260313111028.25159-2-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
The pcm_id value is __le32 so convert it before passing to the dev_dbg
function to be printed. Also fixup some other uses of __le32 data and
a couple of places where %u should have been used instead of %d
Picked up by sparse prototype for variadic and printf
function checking. Fixes a large number of sparse warnings, such as:
sound/soc/sof/pcm.c:84:25: warning: incorrect type in argument 4 (different base types)
sound/soc/sof/pcm.c:84:25: expected unsigned int
sound/soc/sof/pcm.c:84:25: got restricted __le32 [usertype] pcm_id
Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk>
Acked-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://patch.msgid.link/20260324133403.107708-1-ben.dooks@codethink.co.uk
Signed-off-by: Mark Brown <broonie@kernel.org>
MMU-700 r1p1 has subsequently fixed some of the errata for which we've
been applying the workarounds unconditionally, so we can now make those
conditional. However, there have also been some more new cases
identified where we must rely on range invalidation commands, and thus
still nominally avoid DVM being inadvertently enabled.
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Will Deacon <will@kernel.org>
These are introduced by separate commits, so not submitting with a "Fixes"
line, since they aren't critical.
Signed-off-by: Nicolin Chen <nicolinc@nvidia.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Will Deacon <will@kernel.org>
The loop in the __arm_smmu_domain_inv_range() is a while loop, not a for
loop. So, using "continue" is wrong that would fail to move the needle.
Meanwhile, though the current command is skipped, the batch still has to
go through arm_smmu_invs_end_batch() to be issued accordingly.
Thus, use "break" to fix the issue.
Fixes: 587bb3e56a ("iommu/arm-smmu-v3: Add arm_smmu_invs based arm_smmu_domain_inv_range()")
Signed-off-by: Nicolin Chen <nicolinc@nvidia.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Will Deacon <will@kernel.org>
Scoped user access reduces code complexity and seamlessly bring
masked user access on architectures that support it.
Replace user_access_begin/user_access_end blocks by
scoped user access.
Signed-off-by: Christophe Leroy (CS GROUP) <chleroy@kernel.org>
Link: https://patch.msgid.link/16daf33a8190a771a93e294d050bd8153521ffca.1774350128.git.chleroy@kernel.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
In several places in readdir.c there are calculations of the total size
of a dirent, which contains a few fixed fields plus a name field with
variable size. To add fun every dirent is of a slightly different type:
- struct old_linux_dirent
- struct linux_dirent
- struct linux_dirent64
- struct compat_old_linux_dirent
- struct compat_linux_dirent
Replace ugly size calculation by a macro called dirent_size() which
calculates the size of the structure based on the pointed type and
the name field len.
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Christophe Leroy (CS GROUP) <chleroy@kernel.org>
Link: https://patch.msgid.link/c20d2f8f6817a39401155cfc80f0dff88df116e0.1774350128.git.chleroy@kernel.org
Reviewed-by: David Laight <david.laight.linux@gmail.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
With traffic ongoing for data TID [TID 0], an DELBA request to
stop AMPDU for the BA session was received on management TID [TID 4].
The corresponding TID number was incorrectly passed to stop the BA session,
resulting in the BA session for data TIDs being stopped and the BA size
being reduced to 1, causing an overall dip in TCP throughput.
Fix this issue by passing the correct argument from
ath12k_dp_rx_ampdu_stop() to ath12k_dp_arch_peer_rx_tid_reo_update()
during an AMPDU stop session. Instead of passing peer->dp_peer->rx_tid,
which is the base address of the array, corresponding to TID 0, pass
the value of &peer->dp_peer->rx_tid[params->tid]. With this, the
different TID numbers are accounted for.
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.5-01651-QCAHKSWPL_SILICONZ-1
Fixes: d889913205 ("wifi: ath12k: driver for Qualcomm Wi-Fi 7 devices")
Signed-off-by: Reshma Immaculate Rajkumar <reshma.rajkumar@oss.qualcomm.com>
Reviewed-by: Baochen Qiang <baochen.qiang@oss.qualcomm.com>
Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com>
Link: https://patch.msgid.link/20260227110123.3726354-1-reshma.rajkumar@oss.qualcomm.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
During ongoing traffic, a request to stop an AMPDU session
for one TID could incorrectly affect other active sessions.
This can happen because an incorrect TID reference would be
passed when updating the BA session state, causing the wrong
session to be stopped. As a result, the affected session would
be reduced to a minimal BA size, leading to a noticeable
throughput degradation.
Fix this issue by passing the correct argument from
ath11k_dp_rx_ampdu_stop() to ath11k_peer_rx_tid_reo_update()
during a stop AMPDU session. Instead of passing peer->tx_tid, which
is the base address of the array, corresponding to TID 0; pass
the value of &peer->rx_tid[params->tid], where the different TID numbers
are accounted for.
Tested-on: QCN9074 hw1.0 PCI WLAN.HK.2.9.0.1-02146-QCAHKSWPL_SILICONZ-1
Fixes: d5c65159f2 ("ath11k: driver for Qualcomm IEEE 802.11ax devices")
Signed-off-by: Reshma Immaculate Rajkumar <reshma.rajkumar@oss.qualcomm.com>
Reviewed-by: Baochen Qiang <baochen.qiang@oss.qualcomm.com>
Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com>
Link: https://patch.msgid.link/20260319065608.2408179-1-reshma.rajkumar@oss.qualcomm.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
Add the Performance Monitoring Unit (PMU) node with the appropriate
compatible string and interrupt line so that perf and other
PMU-based tooling can function correctly on this SoC.
[root@SAMA7D65 ~]$ dmesg | grep -i pmu
[ 1.487869] hw-perfevents: enabled with armv7_cortex_a7 PMU driver, 5 (8000000f) counters available
[root@SAMA7D65 ~]$ perf list hw
List of pre-defined events (to be used in -e or -M):
branch-instructions OR branches [Hardware event]
branch-misses [Hardware event]
bus-cycles [Hardware event]
cache-misses [Hardware event]
cache-references [Hardware event]
cpu-cycles OR cycles [Hardware event]
instructions [Hardware event]
Signed-off-by: Mihai Sain <mihai.sain@microchip.com>
Link: https://lore.kernel.org/r/20260324070927.1496-2-mihai.sain@microchip.com
[claudiu.beznea: keep nodes alphanumerically sorted]
Signed-off-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
Add the MSI Thin A15 B7VF to the quirk table to enable the internal
microphone, which otherwise does not work out of the box.
Signed-off-by: DanielePioGenovese <delitedaniele@gmail.com>
Link: https://patch.msgid.link/20260320155842.55304-1-delitedaniele@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
