On some systems (e.g. iMac 20,1 with BCM57766), the tg3 driver reads
a default placeholder mac address (00:10:18:00:00:00) from the
mailbox. The correct value on those systems are stored in the
'local-mac-address' property.
This patch, detect the default value and tries to retrieve
the correct address from the device_get_mac_address
function instead.
The patch has been tested on two different systems:
- iMac 20,1 (BCM57766) model which use the local-mac-address property
- iMac 13,2 (BCM57766) model which can use the mailbox,
NVRAM or MAC control registers
Tested-by: Rishon Jonathan R <mithicalaviator85@gmail.com>
Co-developed-by: Vincent MORVAN <vinc@42.fr>
Signed-off-by: Vincent MORVAN <vinc@42.fr>
Signed-off-by: Paul SAGE <paul.sage@42.fr>
Signed-off-by: Atharva Tiwari <atharvatiwarilinuxdev@gmail.com>
Reviewed-by: Michael Chan <michael.chan@broadcom.com>
Link: https://patch.msgid.link/20260314215432.3589-1-atharvatiwarilinuxdev@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
tobgaertner says:
====================
net: usb: cdc_ncm: add ndpoffset to NDP nframes bounds check
The nframes bounds check in cdc_ncm_rx_verify_ndp16() and
cdc_ncm_rx_verify_ndp32() does not account for ndpoffset,
allowing out-of-bounds reads when the NDP is placed near the
end of the NTB.
====================
Link: https://patch.msgid.link/20260314054640.2895026-1-tob.gaertner@me.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The same bounds-check bug fixed for NDP16 in the previous patch also
exists in cdc_ncm_rx_verify_ndp32(). The DPE array size is validated
against the total skb length without accounting for ndpoffset, allowing
out-of-bounds reads when the NDP32 is placed near the end of the NTB.
Add ndpoffset to the nframes bounds check and use struct_size_t() to
express the NDP-plus-DPE-array size more clearly.
Compile-tested only.
Fixes: 0fa81b304a ("cdc_ncm: Implement the 32-bit version of NCM Transfer Block")
Signed-off-by: Tobi Gaertner <tob.gaertner@me.com>
Link: https://patch.msgid.link/20260314054640.2895026-3-tob.gaertner@me.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
cdc_ncm_rx_verify_ndp16() validates that the NDP header and its DPE
entries fit within the skb. The first check correctly accounts for
ndpoffset:
if ((ndpoffset + sizeof(struct usb_cdc_ncm_ndp16)) > skb_in->len)
but the second check omits it:
if ((sizeof(struct usb_cdc_ncm_ndp16) +
ret * (sizeof(struct usb_cdc_ncm_dpe16))) > skb_in->len)
This validates the DPE array size against the total skb length as if
the NDP were at offset 0, rather than at ndpoffset. When the NDP is
placed near the end of the NTB (large wNdpIndex), the DPE entries can
extend past the skb data buffer even though the check passes.
cdc_ncm_rx_fixup() then reads out-of-bounds memory when iterating
the DPE array.
Add ndpoffset to the nframes bounds check and use struct_size_t() to
express the NDP-plus-DPE-array size more clearly.
Fixes: ff06ab13a4 ("net: cdc_ncm: splitting rx_fixup for code reuse")
Signed-off-by: Tobi Gaertner <tob.gaertner@me.com>
Link: https://patch.msgid.link/20260314054640.2895026-2-tob.gaertner@me.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Most platforms using GEM in SGMII mode use in-band autonegotiation
because it is on by default in GEM's 1G PCS and is always on since
commit e276e5e40e ("net: macb: Disable PCS auto-negotiation for SGMII
fixed-link mode"). Leave it on if possible using the "default_an_inband"
flag of "struct phylink_config" so that platforms that lack in-band
autonegotiation configurability at the PHY do not break with commit
1338cfef1f ("net: macb: fix SGMII with inband aneg disabled") which
will turn off in-band autoneg for non hot pluggable PHYs.
Once the majority of the PHY drivers that support SGMII have the
->config_inband() callback, this commit could be reverted so that non
hot pluggable PHY use outband negotiation with macb, like its the case
for other MACs.
Fixes: 1338cfef1f ("net: macb: fix SGMII with inband aneg disabled")
Reported-by: Conor Dooley <conor.dooley@microchip.com>
Closes: https://lore.kernel.org/r/20260304-nebulizer-rounding-40fbc81a2ba1@spud
Signed-off-by: Charles Perry <charles.perry@microchip.com>
Tested-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/20260313142140.4040647-1-charles.perry@microchip.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Only three platforms supprt MSIs, which means having all the strings
and interrupt arrays always allocated wastes space. None of this data
is performance critical - this data is only used when requesting and
releasing the MSI interrupts.
Move the MSI data out of struct stmmac_priv into its own separately
allocated structure, and move its initialisation to a separate
function.
This removes 768 bytes from struct stmmac_priv.
Link: https://lore.kernel.org/r/aYtq4ypxXTvn_Is6@shell.armlinux.org.uk
Reviewed-by: Florian Bezdeka <florian.bezdeka@siemens.com>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/E1w113e-0000000DDwc-2oRv@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jan Petrous says:
====================
Support multi-channel IRQs in stmmac platform drivers
The stmmac core supports two interrupt modes, controlled by the
flag STMMAC_FLAG_MULTI_MSI_EN:
- When the flag is set, the driver uses multi-channel IRQ mode (Multi-IRQ).
- Otherwise, a single IRQ line is requested (aka MAC-IRQ):
static int stmmac_request_irq(struct net_device *dev)
{
/* Request the IRQ lines */
if (priv->plat->flags & STMMAC_FLAG_MULTI_MSI_EN)
ret = stmmac_request_irq_multi_msi(dev);
else
ret = stmmac_request_irq_single(dev);
}
At present, only PCI drivers (Intel and Loongson) make use of the Multi-IRQ
mode. This concept can be extended to DT-based embedded glue drivers
(dwmac-xxx.c).
This series adds support for reading per-channel IRQs from the DT node
and reuses the existing STMMAC_FLAG_MULTI_MSI_EN flag to enable multi-IRQ
operation in platform drivers.
The final decision if Multi-IRQ gets enabled remains on glue driver
to allow implementing any reguirements/limitions the focused platform
needs.
NXP S32G2/S32G3/S32R SoCs integrate the DWMAC IP with multi-channel
interrupt support. The dwmac-s32.c driver change is provided as an example of
enabling multi-IRQ mode for non-PCI drivers.
====================
Link: https://patch.msgid.link/20260313-dwmac_multi_irq-v12-0-b5c9d0aa13d6@oss.nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The DWMAC IP on NXP S32G/R SoCs has connected queue-based IRQ lines,
set them to allow using Multi-IRQ mode.
Reviewed-by: Matthias Brugger <mbrugger@suse.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Jan Petrous (OSS) <jan.petrous@oss.nxp.com>
Link: https://patch.msgid.link/20260313-dwmac_multi_irq-v12-3-b5c9d0aa13d6@oss.nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Read IRQ resources for all rx/tx channels, to allow Multi-IRQ mode
for platform glue drivers.
Reviewed-by: Matthias Brugger <mbrugger@suse.com>
Signed-off-by: Jan Petrous (OSS) <jan.petrous@oss.nxp.com>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/20260313-dwmac_multi_irq-v12-1-b5c9d0aa13d6@oss.nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Do not run airoha_dev_stop routine explicitly in airoha_remove()
since ndo_stop() callback is already executed by unregister_netdev() in
__dev_close_many routine if necessary and, doing so, we will end up causing
an underflow in the qdma users atomic counters. Rely on networking subsystem
to stop the device removing the airoha_eth module.
Fixes: 23020f0493 ("net: airoha: Introduce ethernet support for EN7581 SoC")
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20260313-airoha-remove-ndo_stop-remove-net-v2-1-67542c3ceeca@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Syzkaller reported a panic in smc_tcp_syn_recv_sock() [1].
smc_tcp_syn_recv_sock() is called in the TCP receive path
(softirq) via icsk_af_ops->syn_recv_sock on the clcsock (TCP
listening socket). It reads sk_user_data to get the smc_sock
pointer. However, when the SMC listen socket is being closed
concurrently, smc_close_active() sets clcsock->sk_user_data
to NULL under sk_callback_lock, and then the smc_sock itself
can be freed via sock_put() in smc_release().
This leads to two issues:
1) NULL pointer dereference: sk_user_data is NULL when
accessed.
2) Use-after-free: sk_user_data is read as non-NULL, but the
smc_sock is freed before its fields (e.g., queued_smc_hs,
ori_af_ops) are accessed.
The race window looks like this (the syzkaller crash [1]
triggers via the SYN cookie path: tcp_get_cookie_sock() ->
smc_tcp_syn_recv_sock(), but the normal tcp_check_req() path
has the same race):
CPU A (softirq) CPU B (process ctx)
tcp_v4_rcv()
TCP_NEW_SYN_RECV:
sk = req->rsk_listener
sock_hold(sk)
/* No lock on listener */
smc_close_active():
write_lock_bh(cb_lock)
sk_user_data = NULL
write_unlock_bh(cb_lock)
...
smc_clcsock_release()
sock_put(smc->sk) x2
-> smc_sock freed!
tcp_check_req()
smc_tcp_syn_recv_sock():
smc = user_data(sk)
-> NULL or dangling
smc->queued_smc_hs
-> crash!
Note that the clcsock and smc_sock are two independent objects
with separate refcounts. TCP stack holds a reference on the
clcsock, which keeps it alive, but this does NOT prevent the
smc_sock from being freed.
Fix this by using RCU and refcount_inc_not_zero() to safely
access smc_sock. Since smc_tcp_syn_recv_sock() is called in
the TCP three-way handshake path, taking read_lock_bh on
sk_callback_lock is too heavy and would not survive a SYN
flood attack. Using rcu_read_lock() is much more lightweight.
- Set SOCK_RCU_FREE on the SMC listen socket so that
smc_sock freeing is deferred until after the RCU grace
period. This guarantees the memory is still valid when
accessed inside rcu_read_lock().
- Use rcu_read_lock() to protect reading sk_user_data.
- Use refcount_inc_not_zero(&smc->sk.sk_refcnt) to pin the
smc_sock. If the refcount has already reached zero (close
path completed), it returns false and we bail out safely.
Note: smc_hs_congested() has a similar lockless read of
sk_user_data without rcu_read_lock(), but it only checks for
NULL and accesses the global smc_hs_wq, never dereferencing
any smc_sock field, so it is not affected.
Reproducer was verified with mdelay injection and smc_run,
the issue no longer occurs with this patch applied.
[1] https://syzkaller.appspot.com/bug?extid=827ae2bfb3a3529333e9
Fixes: 8270d9c210 ("net/smc: Limit backlog connections")
Reported-by: syzbot+827ae2bfb3a3529333e9@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/all/67eaf9b8.050a0220.3c3d88.004a.GAE@google.com/T/
Suggested-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Jiayuan Chen <jiayuan.chen@shopee.com>
Link: https://patch.msgid.link/20260312092909.48325-1-jiayuan.chen@linux.dev
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
bond_header_parse() can loop if a stack of two bonding devices is setup,
because skb->dev always points to the hierarchy top.
Add new "const struct net_device *dev" parameter to
(struct header_ops)->parse() method to make sure the recursion
is bounded, and that the final leaf parse method is called.
Fixes: 950803f725 ("bonding: fix type confusion in bond_setup_by_slave()")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Jiayuan Chen <jiayuan.chen@shopee.com>
Tested-by: Jiayuan Chen <jiayuan.chen@shopee.com>
Cc: Jay Vosburgh <jv@jvosburgh.net>
Cc: Andrew Lunn <andrew+netdev@lunn.ch>
Link: https://patch.msgid.link/20260315104152.1436867-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Seems we have been carrying around repeated defines for unaligned mode
logic. Remove redundant ones.
Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20260313111931.438911-1-maciej.fijalkowski@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Instead of only using the 32 low order bits of the local address,
use all of them.
Xor net_hash_mix(net) with the 32 high order bits of the local address
so that we can use __jhash_mix() three times.
If we were hashing 4 extra bytes, we would need one __jhash_final()
which is a bit expensive.
Using net_hash_mix() at the beginning allows better register allocation.
We no longer use a cascade of two jhash and inet6_ehash_secret,
this was dubious/weak.
Add a comment explaining why @lport is not part of the jhash computation.
$ scripts/bloat-o-meter -t vmlinux.0 vmlinux.1
add/remove: 0/0 grow/shrink: 0/1 up/down: 0/-24 (-24)
Function old new delta
inet6_ehashfn 330 306 -24
Total: Before=24855958, After=24855934, chg -0.00%
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20260313120346.3378811-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
For file-backed mount, IO requests are handled by vfs_iocb_iter_read().
However, it can be interrupted by SIGKILL, returning the number of
bytes actually copied. Unused folios in bio are unexpectedly marked
as uptodate.
vfs_read
filemap_read
filemap_get_pages
filemap_readahead
erofs_fileio_readahead
erofs_fileio_rq_submit
vfs_iocb_iter_read
filemap_read
filemap_get_pages <= detect signal
erofs_fileio_ki_complete <= set all folios uptodate
This patch addresses this by setting short read bio with an error
directly.
Fixes: bc804a8d7e ("erofs: handle end of filesystem properly for file-backed mounts")
Reported-by: chenguanyou <chenguanyou@xiaomi.com>
Signed-off-by: Yunlei He <heyunlei@xiaomi.com>
Signed-off-by: Sheng Yong <shengyong1@xiaomi.com>
Reviewed-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
After commit under Fixes debug runners in the CI hit the following:
# subprocess.TimeoutExpired: Command '['bpftrace', '-f', 'json', '-q', '-e', 'kprobe:netpoll_poll_dev { @hits = count(); } interval:s:10 { exit(); }']' timed out after 15 seconds
# # Exception| net.lib.py.ksft.KsftFailEx: bpftrace failed to run!?: {}
in netpoll_basic.py >10% of the time. Let's give bpftool more time
to start, it can take a while on a debug kernel.
Fixes: 82562972b8 ("selftests: net: pass bpftrace timeout to cmd()")
Reviewed-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Nimrod Oren <noren@nvidia.com>
Link: https://patch.msgid.link/20260315160038.3187730-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In HSR offload mode, multicast addresses can be added via HSR master
(hsr0) or directly to slave ports (eth1/eth2). The FDB must track port
membership: P0 (0x1) for HSR master, P1 (0x2) for slave port 1, and P2
(0x4) for slave port 2. When the same address is added from multiple
paths, memberships must accumulate.
Implement a hybrid approach using __dev_mc_sync() callbacks to track
basic add/delete operations, checking netdev_hw_addr->synced to
distinguish HSR-synced addresses from direct additions. Post-process
to handle overlapping memberships by checking refcount:
- refcount=2 with synced=1: HSR only (P0)
- refcount>=3 with synced=1: HSR + direct (P0|P1/P2)
- synced=0 with P0 set: HSR removed, clean up orphaned P0
On add operations, accumulate new membership with existing ports. On
delete operations, remove only the specific port and clean up orphaned
P0 bits if needed.
Add error handling for icssg_fdb_lookup() which can return negative
error codes (e.g., -ETIMEDOUT). On lookup failure in add/delete path,
default to no existing membership. In the post-processing path, skip
the address update to avoid corrupting FDB entries with garbage values.
VLAN Interface Handling:
Add support for multicast addresses added to VLAN interfaces on the HSR
master (e.g., hsr0.7). These addresses require P0 (HSR master) bit to be
set along with the port bits, since VLAN-tagged packets use separate FDB
entries per VLAN ID. Without P0, the HSR master would not receive
multicast packets on VLAN interfaces.
Track whether the add/del operation came from a VLAN interface path and
set P0 when in HSR offload mode with VLAN interfaces. Update orphaned P0
cleanup logic to preserve P0 for VLAN interfaces.
Signed-off-by: MD Danish Anwar <danishanwar@ti.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20260311082923.2962937-1-danishanwar@ti.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Use page_pool for RX buffer allocation in mergeable and small buffer
modes to enable page recycling and avoid repeated page allocator calls.
skb_mark_for_recycle() enables page reuse in the network stack.
Big packets mode is unchanged because it uses page->private for linked
list chaining of multiple pages per buffer, which conflicts with
page_pool's internal use of page->private.
Implement conditional DMA premapping using virtqueue_dma_dev():
- When non-NULL (vhost, virtio-pci): use PP_FLAG_DMA_MAP with page_pool
handling DMA mapping, submit via virtqueue_add_inbuf_premapped()
- When NULL (VDUSE, direct physical): page_pool handles allocation only,
submit via virtqueue_add_inbuf_ctx()
This preserves the DMA premapping optimization from commit 31f3cd4e57
("virtio-net: rq submits premapped per-buffer") while adding page_pool
support as a prerequisite for future zero-copy features (devmem TCP,
io_uring ZCRX).
Page pools are created in probe and destroyed in remove (not open/close),
following existing driver behavior where RX buffers remain in virtqueues
across interface state changes.
Signed-off-by: Vishwanath Seshagiri <vishs@meta.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Link: https://patch.msgid.link/20260310183107.2822016-1-vishs@meta.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The file contains a spelling error in a source comment (resposne).
Typos in comments reduce readability and make text searches less reliable
for developers and maintainers.
Replace 'resposne' with 'response' in the affected comment. This is a
comment-only cleanup and does not change behavior.
[v2: Removed Fixes: and Cc: to stable tags.]
Signed-off-by: Joseph Salisbury <joseph.salisbury@oracle.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Check the global CXL_HDM_DECODER_ENABLE bit instead of looping over
per-decoder COMMITTED bits to determine whether to fall back to DVSEC
range emulation. When the HDM decoder capability is globally enabled,
ignore DVSEC range registers regardless of individual decoder commit
state.
should_emulate_decoders() currently loops over per-decoder COMMITTED
bits, which leads to an incorrect DVSEC fallback when those bits are
zero. One way to trigger this is to destroy a region and bounce the
memdev:
cxl disable-region region0
cxl destroy-region region0
cxl disable-memdev mem0
cxl enable-memdev mem0
Region teardown zeroes the HDM decoder registers including the committed
bits. The subsequent memdev re-probe finds uncommitted decoders and falls
back to DVSEC emulation, even though HDM remains globally enabled.
Observed failures:
should_emulate_decoders: cxl_port endpoint6: decoder6.0: committed: 0 base: 0x0_00000000 size: 0x0_00000000
devm_cxl_setup_hdm: cxl_port endpoint6: Fallback map 1 range register
..
devm_cxl_add_region: cxl_acpi ACPI0017:00: decoder0.0: created region0
__construct_region: cxl_pci 0000:e1:00.0: mem1:decoder6.0:
__construct_region region0 res: [mem 0x850000000-0x284fffffff flags 0x200] iw: 1 ig: 4096
cxl region0: pci0000:e0:port1 cxl_port_setup_targets expected iw: 1 ig: 4096 ..
cxl region0: pci0000:e0:port1 cxl_port_setup_targets got iw: 1 ig: 256 state: disabled ..
cxl_port endpoint6: failed to attach decoder6.0 to region0: -6
..
devm_cxl_add_region: cxl_acpi ACPI0017:00: decoder0.0: created region4
alloc_hpa: cxl region4: HPA allocation error (-34) ..
Fixes: 52cc48ad2a ("cxl/hdm: Limit emulation to the number of range registers")
Signed-off-by: Smita Koralahalli <Smita.KoralahalliChannabasappa@amd.com>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Link: https://patch.msgid.link/20260316201950.224567-1-Smita.KoralahalliChannabasappa@amd.com
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Region creation based on Type3 devices can be triggered from user space
allowing memory combination through interleaving.
In preparation for kernel driven region creation, that is Type2 drivers
triggering region creation backed with its advertised CXL memory, factor
out a common helper from the user-sysfs region setup for interleave
granularity.
Signed-off-by: Alejandro Lucero <alucerop@amd.com>
Reviewed-by: Gregory Price <gourry@gourry.net>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Tested-by: Gregory Price <gourry@gourry.net>
Reviewed-by: Alison Schofield <alison.schofield@intel.com>
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Link: https://patch.msgid.link/20260228173603.1125109-4-alejandro.lucero-palau@amd.com
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Region creation based on Type3 devices can be triggered from user space
allowing memory combination through interleaving.
In preparation for kernel driven region creation, that is Type2 drivers
triggering region creation backed with its advertised CXL memory, factor
out a common helper from the user-sysfs region setup for interleave ways.
Signed-off-by: Alejandro Lucero <alucerop@amd.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Reviewed-by: Gregory Price <gourry@gourry.net>
Tested-by: Gregory Price <gourry@gourry.net>
Reviewed-by: Alison Schofield <alison.schofield@intel.com>
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Link: https://patch.msgid.link/20260228173603.1125109-3-alejandro.lucero-palau@amd.com
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Current code is expecting Type3 or CXL_DECODER_HOSTONLYMEM devices only.
Support for Type2 implies region type needs to be based on the endpoint
type HDM-D[B] instead.
Signed-off-by: Alejandro Lucero <alucerop@amd.com>
Reviewed-by: Zhi Wang <zhiw@nvidia.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Ben Cheatham <benjamin.cheatham@amd.com>
Reviewed-by: Alison Schofield <alison.schofield@intel.com>
Reviewed-by: Davidlohr Bueso <daves@stgolabs.net>
Reviewed-by: Gregory Price <gourry@gourry.net>
Tested-by: Gregory Price <gourry@gourry.net>
Reviewed-by: Davidlohr Bueso <dave@stgolabs.net>
Link: https://patch.msgid.link/20260228173603.1125109-2-alejandro.lucero-palau@amd.com
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Remove the redundant port lookup from cxl_rcrb_get_comp_regs() and use the
dport parameter directly. The caller has already validated the port is
non-NULL before invoking this function, and dport is given as a param.
This is simpler than getting dport in the callee and return the pointer
to the caller what would require more changes.
Signed-off-by: Gregory Price <gourry@gourry.net>
Reviewed-by: Alejandro Lucero <alucerop@amd.com>
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Reviewed-by: Davidlohr Bueso <dave@stgolabs.net>
Link: https://patch.msgid.link/20260306164741.3796372-5-alejandro.lucero-palau@amd.com
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Inside cxl/core/pci.c there are helpers for CXL PCIe initialization
meanwhile cxl/pci_drv.c implements the functionality for a Type3 device
initialization.
In preparation for type2 support, move helper functions from cxl/pci.c to
cxl/core/pci.c in order to be exported and used by type2 drivers.
[ dj: Clarified subject. ]
Signed-off-by: Alejandro Lucero <alucerop@amd.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Reviewed-by: Gregory Price <gourry@gourry.net>
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Signed-off-by: Gregory Price <gourry@gourry.net>
Link: https://patch.msgid.link/20260306164741.3796372-4-alejandro.lucero-palau@amd.com
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
In preparation for type2 support, move structs and functions a type2
driver will need to access to into a new shared header file.
Differentiate between public and private data to be preserved by type2
drivers.
Signed-off-by: Alejandro Lucero <alucerop@amd.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Tested-by: Alison Schofield <alison.schofield@intel.com>
Reviewed-by: Gregory Price <gourry@gourry.net>
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Link: https://patch.msgid.link/20260306164741.3796372-3-alejandro.lucero-palau@amd.com
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
In preparation for type2 drivers add function and macro for
differentiating CXL memory expanders (type 3) from CXL device
accelerators (type 2) helping drivers built from public headers
to embed struct cxl_dev_state inside a private struct.
Update type3 driver for using this same initialization.
Signed-off-by: Alejandro Lucero <alucerop@amd.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Reviewed-by: Alison Schofield <alison.schofield@intel.com>
Reviewed-by: Gregory Price <gourry@gourry.net>
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Link: https://patch.msgid.link/20260306164741.3796372-2-alejandro.lucero-palau@amd.com
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
If OF graph is used in the PCI device node, the pwrctrl core creates a
pwrctrl device even if the remote endpoint doesn't have power supply
requirements. Since the device doesn't have any power supply requirements,
there was no pwrctrl driver to probe, leading to PCI controller driver
probe deferral as it waits for all pwrctrl drivers to probe before starting
bus scan.
This issue happens with Qcom ath12k devices with WSI interface attached to
the Qcom IPQ platforms.
Fix this issue by checking for the existence of at least one power supply
property in the remote endpoint parent node. To consolidate all the checks,
create a new helper pci_pwrctrl_is_required() and move all the checks
there.
Fixes: 9db826206f ("PCI/pwrctrl: Create pwrctrl device if graph port is found")
Reported-by: Raj Kumar Bhagat <raj.bhagat@oss.qualcomm.com>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@oss.qualcomm.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Tested-by: Raj Kumar Bhagat <raj.bhagat@oss.qualcomm.com>
Reviewed-by: Krishna Chaitanya Chundru <krishna.chundru@oss.qualcomm.com>
Reviewed-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Link: https://patch.msgid.link/20260223-pwrctrl-fixes-7-0-v2-1-97566dfb1809@oss.qualcomm.com
The xfstests' test-case generic/533 fails to execute
correctly:
FSTYP -- hfsplus
PLATFORM -- Linux/x86_64 hfsplus-testing-0001 6.15.0-rc4+ #8 SMP PREEMPT_DYNAMIC Thu May 1 16:43:22 PDT 2025
MKFS_OPTIONS -- /dev/loop51
MOUNT_OPTIONS -- /dev/loop51 /mnt/scratch
generic/533 _check_generic_filesystem: filesystem on /dev/loop50 is inconsistent
(see xfstests-dev/results//generic/533.full for details)
The key reason of the issue is returning -ENOENT error
code from hfsplus_find_attr(), __hfsplus_delete_attr(),
hfsplus_delete_attr_nolock(), hfsplus_delete_all_attrs().
The file exists but we don't have any xattr for this file.
Finally, -ENODATA error code is expected by application logic.
This patch reworks xattr logic of HFS+ by means exchanging
the -ENOENT error code on -ENODATA error code if xattr
has not been found for existing file or folder.
sudo ./check generic/533
FSTYP -- hfsplus
PLATFORM -- Linux/x86_64 hfsplus-testing-0001 7.0.0-rc1+ #16 SMP PREEMPT_DYNAMIC Wed Mar 11 15:04:58 PDT 2026
MKFS_OPTIONS -- /dev/loop51
MOUNT_OPTIONS -- /dev/loop51 /mnt/scratch
generic/533 33s ... 32s
Ran: generic/533
Passed all 1 tests
Closes: https://github.com/hfs-linux-kernel/hfs-linux-kernel/issues/184
cc: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
cc: Yangtao Li <frank.li@vivo.com>
cc: linux-fsdevel@vger.kernel.org
Signed-off-by: Viacheslav Dubeyko <slava@dubeyko.com>
Link: https://lore.kernel.org/r/20260312221920.1422683-2-slava@dubeyko.com
Signed-off-by: Viacheslav Dubeyko <slava@dubeyko.com>
Implement BPF struct ops registration. It's registered off the BPF
path, and can be removed by BPF as well as io_uring. To protect it,
introduce a global lock synchronising registration. ctx->uring_lock can
be nested under it. ctx->bpf_ops is write protected by both locks and
so it's safe to read it under either of them.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://patch.msgid.link/1f46bffd76008de49cbafa2ad77d348810a4f69e.1772109579.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Add two kfuncs that should cover most of the needs:
1. bpf_io_uring_submit_sqes(), which allows to submit io_uring requests.
It mirrors the normal user space submission path and follows all
related io_uring_enter(2) rules. i.e. SQEs are taken from the SQ
according to head/tail values. In case of IORING_SETUP_SQ_REWIND,
it'll submit first N entries.
2. bpf_io_uring_get_region() returns a pointer to the specified region,
where io_uring regions are kernel-userspace shared chunks of memory.
It takes the size as an argument, which should be a load time
constant. There are 3 types of regions:
- IOU_REGION_SQ returns the submission queue.
- IOU_REGION_CQ stores the CQ, SQ/CQ headers and the sqarray. In
other words, it gives same memory that would normally be mmap'ed
with IORING_FEAT_SINGLE_MMAP enabled IORING_OFF_SQ_RING.
- IOU_REGION_MEM represents the memory / parameter region. It can be
used to store request indirect parameters and for kernel - user
communication.
It intentionally provides a thin but flexible API and expects BPF
programs to implement CQ/SQ header parsing, CQ walking, etc. That
mirrors how the normal user space works with rings and should help
to minimise kernel / kfunc helpers changes while introducing new generic
io_uring features.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://patch.msgid.link/967bcc10e94c796eb273998621551b2a21848cde.1772109579.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Introduce io_uring BPF struct ops implementing the loop_step callback,
which will allow BPF to overwrite the default io_uring event loop logic.
The callback takes an io_uring context, the main role of which is to be
passed to io_uring kfuncs. The other argument is a struct iou_loop_params,
which BPF can use to request CQ waiting and communicate other parameters.
See the event loop description in the previous patch for more details.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://patch.msgid.link/98db437651ce64e9cbeb611c60bf5887259db09f.1772109579.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The io_uring_enter() has a fixed order of execution: it submits
requests, waits for completions, and returns to the user. Allow to
optionally replace it with a custom loop driven by a callback called
loop_step. The basic requirements to the callback is that it should be
able to submit requests, wait for completions, parse them and repeat.
Most of the communication including parameter passing can be implemented
via shared memory.
The callback should return IOU_LOOP_CONTINUE to continue execution or
IOU_LOOP_STOP to return to the user space. Note that the kernel may
decide to prematurely terminate it as well, e.g. in case the process was
signalled or killed.
The hook takes a structure with parameters. It can be used to ask the
kernel to wait for CQEs by setting cq_wait_idx to the CQE index it wants
to wait for. Spurious wake ups are possible and even likely, the callback
is expected to handle it. There will be more parameters in the future
like timeout.
It can be used with kernel callbacks, for example, as a slow path
deprecation mechanism overwiting SQEs and emulating the wanted
behaviour, however it's more useful together with BPF programs
implemented in following patches.
Note that keeping it separately from the normal io_uring wait loop
makes things much simpler and cleaner. It keeps it in one place instead
of spreading a bunch of checks in different places including disabling
the submission path. It holds the lock by default, which is a better fit
for BPF synchronisation and the loop execution model. It nicely avoids
existing quirks like forced wake ups on timeout request completion. And
it should be easier to implement new features.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://patch.msgid.link/a2d369aa1c9dd23ad7edac9220cffc563abcaed6.1772109579.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
nvme_dev_uring_cmd() is part of struct file_operations nvme_dev_fops,
which doesn't implement ->uring_cmd_iopoll(). So it won't be called with
issue_flags that include IO_URING_F_IOPOLL. Drop the unnecessary
IO_URING_F_IOPOLL check in nvme_dev_uring_cmd().
Signed-off-by: Caleb Sander Mateos <csander@purestorage.com>
Reviewed-by: Kanchan Joshi <joshi.k@samsung.com>
Reviewed-by: Anuj Gupta <anuj20.g@samsung.com>
Link: https://patch.msgid.link/20260302172914.2488599-6-csander@purestorage.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Currently, creating an io_uring with IORING_SETUP_IOPOLL requires all
requests issued to it to support iopoll. This prevents, for example,
using ublk zero-copy together with IORING_SETUP_IOPOLL, as ublk
zero-copy buffer registrations are performed using a uring_cmd. There's
no technical reason why these non-iopoll uring_cmds can't be supported.
They will either complete synchronously or via an external mechanism
that calls io_uring_cmd_done(), io_uring_cmd_post_mshot_cqe32(), or
io_uring_mshot_cmd_post_cqe(), so they don't need to be polled.
Allow uring_cmd requests to be issued to IORING_SETUP_IOPOLL io_urings
even if their files don't implement ->uring_cmd_iopoll(). For these
uring_cmd requests, skip initializing struct io_kiocb's iopoll fields,
don't set REQ_F_IOPOLL, and don't set IO_URING_F_IOPOLL in issue_flags.
Signed-off-by: Caleb Sander Mateos <csander@purestorage.com>
Reviewed-by: Kanchan Joshi <joshi.k@samsung.com>
Reviewed-by: Anuj Gupta <anuj20.g@samsung.com>
Link: https://patch.msgid.link/20260302172914.2488599-5-csander@purestorage.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
A subsequent commit will allow uring_cmds that don't use iopoll on
IORING_SETUP_IOPOLL io_urings. As a result, CQEs can be posted without
setting the iopoll_completed flag for a request in iopoll_list or going
through task work. For example, a UBLK_U_IO_FETCH_IO_CMDS command could
call io_uring_mshot_cmd_post_cqe() to directly post a CQE. The
io_iopoll_check() loop currently only counts completions posted in
io_do_iopoll() when determining whether the min_events threshold has
been met. It also exits early if there are any existing CQEs before
polling, or if any CQEs are posted while running task work. CQEs posted
via io_uring_mshot_cmd_post_cqe() or other mechanisms won't be counted
against min_events.
Explicitly check the available CQEs in each io_iopoll_check() loop
iteration to account for CQEs posted in any fashion.
Signed-off-by: Caleb Sander Mateos <csander@purestorage.com>
Link: https://patch.msgid.link/20260302172914.2488599-4-csander@purestorage.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The opcode iopoll_queue flag is now redundant with REQ_F_IOPOLL. Only
io_{read,write}{,_fixed}() and io_uring_cmd() set the REQ_F_IOPOLL flag,
and the opcodes with these ->issue() implementations are precisely the
ones that set iopoll_queue. So don't bother checking the iopoll_queue
flag in io_issue_sqe(). Remove the unused flag from struct io_issue_def.
Signed-off-by: Caleb Sander Mateos <csander@purestorage.com>
Reviewed-by: Kanchan Joshi <joshi.k@samsung.com>
Reviewed-by: Anuj Gupta <anuj20.g@samsung.com>
Link: https://patch.msgid.link/20260302172914.2488599-3-csander@purestorage.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
A subsequent commit will allow uring_cmds to files that don't implement
->uring_cmd_iopoll() to be issued to IORING_SETUP_IOPOLL io_urings. This
means the ctx's IORING_SETUP_IOPOLL flag isn't sufficient to determine
whether a given request needs to be iopolled.
Introduce a request flag REQ_F_IOPOLL set in ->issue() if a request
needs to be iopolled to completion. Set the flag in io_rw_init_file()
and io_uring_cmd() for requests issued to IORING_SETUP_IOPOLL ctxs. Use
the request flag instead of IORING_SETUP_IOPOLL in places dealing with a
specific request.
A future possibility would be to add an option to enable/disable iopoll
in the io_uring SQE instead of determining it from IORING_SETUP_IOPOLL.
Signed-off-by: Caleb Sander Mateos <csander@purestorage.com>
Reviewed-by: Kanchan Joshi <joshi.k@samsung.com>
Reviewed-by: Anuj Gupta <anuj20.g@samsung.com>
Link: https://patch.msgid.link/20260302172914.2488599-2-csander@purestorage.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
There are a few of these, where flags are read outside of the
uring_lock, yet it's harmless to race on them.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Bitfields cannot be set and checked atomically, and this makes it more
clear that these are indeed in shared storage and must be checked and
set in a sane fashion. This is in preparation for annotating a few of
the known racy, but harmless, flags checking.
No intended functional changes in this patch.
Reviewed-by: Gabriel Krisman Bertazi <krisman@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Introduce SKIP_LLVM, SKIP_LIBBFD, and SKIP_CRYPTO build flags that let
users build bpftool without these optional dependencies.
SKIP_LLVM=1 skips LLVM even when detected. SKIP_LIBBFD=1 prevents the
libbfd JIT disassembly fallback when LLVM is absent. Together, they
produce a bpftool with no disassembly support.
SKIP_CRYPTO=1 excludes sign.c and removes the -lcrypto link dependency.
Inline stubs in main.h return errors with a clear message if signing
functions are called at runtime.
Use BPFTOOL_WITHOUT_CRYPTO (not HAVE_LIBCRYPTO_SUPPORT) as the C
define, following the BPFTOOL_WITHOUT_SKELETONS naming convention for
bpftool-internal build config, leaving HAVE_LIBCRYPTO_SUPPORT free for
proper feature detection in the future.
All three flags are propagated through the selftests Makefile to bpftool
sub-builds.
Signed-off-by: Mykyta Yatsenko <yatsenko@meta.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20260312-b4-bpftool_build-v2-1-4c9d57133644@meta.com
The AER and EDR error handling paths hold a reference on the pci_dev during
recovery. Hold a reference during the DPC recovery path as well.
Signed-off-by: Sizhe Liu <liusizhe5@huawei.com>
[bhelgaas: split to separate patch]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
https://patch.msgid.link/20260214081130.1878424-1-liusizhe5@huawei.com
The NFSv4.0 replay cache uses a fixed 112-byte inline buffer
(rp_ibuf[NFSD4_REPLAY_ISIZE]) to store encoded operation responses.
This size was calculated based on OPEN responses and does not account
for LOCK denied responses, which include the conflicting lock owner as
a variable-length field up to 1024 bytes (NFS4_OPAQUE_LIMIT).
When a LOCK operation is denied due to a conflict with an existing lock
that has a large owner, nfsd4_encode_operation() copies the full encoded
response into the undersized replay buffer via read_bytes_from_xdr_buf()
with no bounds check. This results in a slab-out-of-bounds write of up
to 944 bytes past the end of the buffer, corrupting adjacent heap memory.
This can be triggered remotely by an unauthenticated attacker with two
cooperating NFSv4.0 clients: one sets a lock with a large owner string,
then the other requests a conflicting lock to provoke the denial.
We could fix this by increasing NFSD4_REPLAY_ISIZE to allow for a full
opaque, but that would increase the size of every stateowner, when most
lockowners are not that large.
Instead, fix this by checking the encoded response length against
NFSD4_REPLAY_ISIZE before copying into the replay buffer. If the
response is too large, set rp_buflen to 0 to skip caching the replay
payload. The status is still cached, and the client already received the
correct response on the original request.
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Cc: stable@kernel.org
Reported-by: Nicholas Carlini <npc@anthropic.com>
Tested-by: Nicholas Carlini <npc@anthropic.com>
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
