The current code creates one hwmon device per thermal zone type and that
device is registered under the first thermal zone of the given type.
That turns out to be problematic when the thermal zone holding the
hwmon device is removed.
For example, say that there are two ACPI thermal zones on a system
/sys/devices/virtual/thermal/thermal_zone0/
/sys/devices/virtual/thermal/thermal_zone1/
The current code registers a hwmon class device for thermal_zone0 only:
/sys/devices/virtual/thermal/thermal_zone0/hwmon0/
because the type is "acpitz" for both of them, but it adds a sysfs
attribute that belongs to thermal_zone1 under it:
/sys/devices/virtual/thermal/thermal_zone0/hwmon0/temp2_input
There is also
/sys/devices/virtual/thermal/thermal_zone0/hwmon0/temp1_input
which belongs to thermal_zone0.
When thermal_zone0 is removed, say because the ACPI thermal driver is
unbound from the underlying platform device, the removal code skips the
removal of hwmon0 because of the temp2_input attribute belonging to
thermal_zone1 which effectively prevents thermal_zone0 removal from
making progress.
To address this problem, rework the thermal hwmon code to register one
hwmon device for each thermal zone, but since user space utilities
produce confusing output in some cases when there are multiple hwmon
devices with the same name attribute value present under thermal zones
of the same type, append the thermal zone ID preceded by an underline
character to the name of the hwmon device registered for that thermal
zone.
Link: https://lore.kernel.org/linux-pm/20260402021828.16556-1-liujia6264@gmail.com/
Fixes: f6b6b52ef7 ("thermal_hwmon: Pass the originating device down to hwmon_device_register_with_info")
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://patch.msgid.link/3070412.e9J7NaK4W3@rafael.j.wysocki
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Since the return value of thermal_zone_crit_temp_valid() depends on
the behavior of the thermal zone .get_crit_temp() callback which
may change over time in theory, thermal_remove_hwmon_sysfs() may
attempt to remove a critical temperature attribute that has not
been created, passing a pointer to an uninitialized attribute
structure to device_remove_file().
To avoid that, set a flag in struct thermal_hwmon_temp after creating
a critical temperature attribute and use the value of that flag to
decide whether or not the attribute needs to be removed.
Fixes: e8db5d6736 ("thermal: hwmon: Make the check for critical temp valid consistent")
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://patch.msgid.link/2437056.ElGaqSPkdT@rafael.j.wysocki
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The thermal class is now dynamically allocated and stored as a
pointer.
Use the thermal_class pointer itself to check whether the thermal
class has been created instead of keeping a separate
thermal_class_unavailable flag.
Signed-off-by: Daniel Lezcano <daniel.lezcano@oss.qualcomm.com>
Reviewed-by: Lukasz Luba <lukasz.luba@arm.com>
Link: https://patch.msgid.link/20260508180511.1306659-5-daniel.lezcano@oss.qualcomm.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Use class_create() instead of a statically allocated struct class.
This allows the thermal class to be managed through a dynamically
allocated class object and avoids keeping a static class instance
around.
Signed-off-by: Daniel Lezcano <daniel.lezcano@oss.qualcomm.com>
Reviewed-by: Lukasz Luba <lukasz.luba@arm.com>
[ rjw: Added __ro_after_init to thermal_class ]
[ rjw: Used temporary local var to store class_create() return value ]
Link: https://patch.msgid.link/20260508180511.1306659-4-daniel.lezcano@oss.qualcomm.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The thermal class release callback currently handles thermal zone
cleanup by checking the device name prefix.
Move the thermal zone cleanup to a dedicated struct device release
callback. This avoids relying on device names to select the release
path and keeps the thermal zone lifetime handling local to the thermal
zone object.
Signed-off-by: Daniel Lezcano <daniel.lezcano@oss.qualcomm.com>
Reviewed-by: Lukasz Luba <lukasz.luba@arm.com>
Link: https://patch.msgid.link/20260508180511.1306659-3-daniel.lezcano@oss.qualcomm.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The thermal class release callback currently handles both thermal
zones and cooling devices by checking the device name prefix.
Move the cooling device cleanup to a dedicated struct device release
callback. This avoids relying on device names to select the release
path and keeps the cooling device lifetime handling local to the
cooling device object.
Signed-off-by: Daniel Lezcano <daniel.lezcano@oss.qualcomm.com>
Reviewed-by: Lukasz Luba <lukasz.luba@arm.com>
Link: https://patch.msgid.link/20260508180511.1306659-2-daniel.lezcano@oss.qualcomm.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
In update_parent_effective_cpumask() with partcmd_invalidate, the CPUs
to return to the parent are computed as:
adding = cpumask_and(tmp->addmask, xcpus, parent->effective_xcpus);
where xcpus = user_xcpus(cs) which returns cs->exclusive_cpus (if set)
or cs->cpus_allowed. When exclusive_cpus is not set, user_xcpus(cs) can
contain CPUs that were never actually granted to the partition due to
sibling exclusion in compute_excpus(). Consequently, the invalidation
may return CPUs to the parent that remain in use by sibling partitions,
causing overlapping effective_cpus and triggering the
WARN_ON_ONCE(1) in generate_sched_domains().
Use cs->effective_xcpus instead, which reflects the CPUs actually
granted to this partition.
Reproducer (on a 4-CPU machine):
cd /sys/fs/cgroup
mkdir a1 b1
# a1 becomes partition root with CPUs 0-1
echo "0-1" > a1/cpuset.cpus
echo "root" > a1/cpuset.cpus.partition
# b1 becomes partition root with CPUs 1-2, but sibling exclusion
# reduces its effective_xcpus to CPU 2 only
echo "1-2" > b1/cpuset.cpus
echo "root" > b1/cpuset.cpus.partition
# b1 changes cpus_allowed to 0-1 -> partition invalidation
echo "0-1" > b1/cpuset.cpus
# Expected: CPUs 2-3 (only CPU 2 returned from b1)
# Actual: CPUs 1-3 (CPU 0-1 returned, overlapping with a1)
cat cpuset.cpus.effective
dmesg will also show a WARNING from generate_sched_domains() reporting
overlapping partition root effective_cpus.
Fixes: 2a3602030d ("cgroup/cpuset: Don't invalidate sibling partitions on cpuset.cpus conflict")
Cc: stable@vger.kernel.org # v7.0+
Signed-off-by: sunshaojie <sunshaojie@kylinos.cn>
Tested-by: Chen Ridong <chenridong@huaweicloud.com>
Reviewed-by: Chen Ridong <chenridong@huaweicloud.com>
Reviewed-by: Waiman Long <longman@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
* Add the pKVM side of the workaround for ARM's erratum 4193714, provided
that the EL3 firmware does its part of the job. KVM will refuse to
initialise otherwise.
- Correctly handle 52bit VAs for guest EL2 stage-1 translations when
running under NV with E2H==0.
* Correctly deal with permission faults in guest_memfd memslots.
* Fix the steal-time selftest after the infrastructure was reworked.
* Make sure the host cannot pass a non-sensical clock update to the
EL2 tracing infrastructure.
* Appoint Steffen Eiden as a reviewer in anticipation of the KVM/s390
ability to run arm64 guests, which will inevitably lead to arm64
code being directly used on s390.
* Make sure that EL2 is configured with both exception entry and exit
being Context Synchronization Events.
* Handle the current vcpu being NULL on EL2 panic.
* Fix the selftest_vcpu memcache being empty at the point of donation or
sharing.
* Check that the memcache has enough capacity before engaging on the
share/donate path.
* Fix __deactivate_fgt() to use its parameter rather than a variable
in the macro context.
s390:
* Fix array overrun with large amounts of PCI devices.
x86:
* Never use L0's PAUSE loop exiting while L2 is running, since it's
unlikely that a nested guest will help solving the hypervisor's
spinlock contention
* Fix emulation of MOVNTDQA.
* Fix typo in Xen hypercall tracepoint
* Add back an optimization that was left behind when recently
fixing a bug.
* Add module parameter to disable CET, whose implementation seems
to have issues. For now it remains enabled by default.
Generic:
* Reject offset causing an unsigned overflow in kvm_reset_dirty_gfn()
Documentation:
* Update stale links
Selftests:
* Fix guest_memfd_test with host page size > guest page size.
-----BEGIN PGP SIGNATURE-----
iQFIBAABCgAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmoEnNgUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroPOeAgArZ60yQGH0TJipyNsaPt+m+IEGMZ/
UC1tRd384EJnwpjFfZOvwluNNxeFlSXlku7iEXHHveK1qqFXnh+WBXJ91ftfDK/+
OOqVBBziOyxI6Mbsm2S415kzOQ15atsrclrcGC4emSydgX+JASZ4nsGx6MDRPu/8
p4TNy3vD5wxe3UGttYElMoFcgT0N/HepMyvUlXohjcjl/hkgf5GL4yPc/TGuvdtz
EJfmDRhJEwyzf4/Ut8tzX+LhNxSY2iBr5XBvC8XQMSJBVbU/CRGxUk28fEzo7ykx
EHVOlkxgUN1zO0xh/8aMgRIZNDMveWupR2sJe6StCqOlcbBMI2oYFNnLfQ==
=f8oe
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm fixes from Paolo Bonzini:
"arm64:
- Add the pKVM side of the workaround for ARM's erratum 4193714,
provided that the EL3 firmware does its part of the job. KVM will
refuse to initialise otherwise
- Correctly handle 52bit VAs for guest EL2 stage-1 translations when
running under NV with E2H==0
- Correctly deal with permission faults in guest_memfd memslots
- Fix the steal-time selftest after the infrastructure was reworked
- Make sure the host cannot pass a non-sensical clock update to the
EL2 tracing infrastructure
- Appoint Steffen Eiden as a reviewer in anticipation of the KVM/s390
ability to run arm64 guests, which will inevitably lead to arm64
code being directly used on s390
- Make sure that EL2 is configured with both exception entry and exit
being Context Synchronization Events
- Handle the current vcpu being NULL on EL2 panic
- Fix the selftest_vcpu memcache being empty at the point of donation
or sharing
- Check that the memcache has enough capacity before engaging on the
share/donate path
- Fix __deactivate_fgt() to use its parameter rather than a variable
in the macro context
s390:
- Fix array overrun with large amounts of PCI devices
x86:
- Never use L0's PAUSE loop exiting while L2 is running, since it's
unlikely that a nested guest will help solving the hypervisor's
spinlock contention
- Fix emulation of MOVNTDQA
- Fix typo in Xen hypercall tracepoint
- Add back an optimization that was left behind when recently fixing
a bug
- Add module parameter to disable CET, whose implementation seems to
have issues. For now it remains enabled by default
Generic:
- Reject offset causing an unsigned overflow in kvm_reset_dirty_gfn()
Documentation:
- Update stale links
Selftests:
- Fix guest_memfd_test with host page size > guest page size"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (22 commits)
KVM: VMX: introduce module parameter to disable CET
KVM: x86: Swap the dst and src operand for MOVNTDQA
KVM: x86: use again the flush argument of __link_shadow_page()
KVM: selftests: Ensure gmem file sizes are multiple of host page size
Documentation: kvm: update links in the references section of AMD Memory Encryption
KVM: nSVM: Never use L0's PAUSE loop exiting while L2 is running
KVM: x86: Fix Xen hypercall tracepoint argument assignment
KVM: Reject wrapped offset in kvm_reset_dirty_gfn()
KVM: arm64: Pre-check vcpu memcache for host->guest donate
KVM: arm64: Pre-check vcpu memcache for host->guest share
KVM: arm64: Seed pkvm_ownership_selftest vcpu memcache
KVM: arm64: Fix __deactivate_fgt macro parameter typo
KVM: arm64: Guard against NULL vcpu on VHE hyp panic path
KVM: arm64: Make EL2 exception entry and exit context-synchronization events
MAINTAINERS: Add Steffen as reviewer for KVM/arm64
KVM: arm64: Remove potential UB on nvhe tracing clock update
KVM: selftests: arm64: Fix steal_time test after UAPI refactoring
KVM: arm64: Handle permission faults with guest_memfd
KVM: arm64: nv: Consider the DS bit when translating TCR_EL2
KVM: arm64: Work around C1-Pro erratum 4193714 for protected guests
...
When cg_name_indexed() returns NULL partway through the child creation
loop, the code returned -1 without running cleanup_children and cleanup.
That left the `parent` pathname allocation unreleased and did not remove
child cgroup directories already created under the parent. Fix by jumping
to cleanup_children instead of returning.
When cg_create() fails, `child` (the pathname from cg_name_indexed())
was not freed before cleanup_children. Fix by freeing `child` before
branching to cleanup_children.
Fixes: 90631e1dea ("kselftests: cgroup: add perpcu memory accounting test")
Signed-off-by: Yu Miao <yumiao@kylinos.cn>
Signed-off-by: Tejun Heo <tj@kernel.org>
bnxt_re_alloc_ucontext() allocates uctx->shpg via
__get_free_page(GFP_KERNEL). The buddy allocator does not zero pages
without __GFP_ZERO, so the page contains stale kernel data from
whatever object most recently freed it.
The page is then mapped into userspace via vm_insert_page() under
BNXT_RE_MMAP_SH_PAGE in bnxt_re_mmap(). The driver only ever writes
4 bytes (a u32 AVID) at offset BNXT_RE_AVID_OFFT (0x10) inside
bnxt_re_create_ah(); the remaining 4092 bytes of the page are exposed
to userspace unsanitised, leaking kernel memory contents.
Any user with access to /dev/infiniband/uverbsX on a host with a
bnxt_re device (typically rdma group membership) can read this data
via a single mmap() at pgoff 0 after IB_USER_VERBS_CMD_GET_CONTEXT.
Other shared pages in the same file already use get_zeroed_page()
correctly:
drivers/infiniband/hw/bnxt_re/ib_verbs.c
srq->uctx_srq_page = (void *)get_zeroed_page(GFP_KERNEL);
cq->uctx_cq_page = (void *)get_zeroed_page(GFP_KERNEL);
uctx->shpg is the only outlier. Bring it in line with the existing
convention by switching to get_zeroed_page().
Fixes: 1ac5a40479 ("RDMA/bnxt_re: Add bnxt_re RoCE driver")
Signed-off-by: Lord Ulf Henrik Holmberg <henrik.holmberg@defensify.se>
Link: https://patch.msgid.link/20260509084011.11971-1-pomzm67@gmail.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Currently, the rdma rxe selftests fail with an exit code of 1 when
required kernel modules are not present. This causes spurious failures
in environments where these modules might not be compiled or available.
Include the standard kselftest 'ktap_helpers.sh' and replace the
hardcoded error exits with '$KSFT_SKIP'. This ensures the tests are
properly marked as skipped rather than failed.
Fixes: e01027cab3 ("RDMA/rxe: Add testcase for net namespace rxe")
Signed-off-by: Yi Lai <yi1.lai@intel.com>
Link: https://patch.msgid.link/20260507125106.3114167-1-yi1.lai@intel.com
Reviewed-by: Zhu Yanjun <yanjun.zhu@linux.dev>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
The LVDS init code looks up an I2C adapter using i2c_get_adapter() and
tries to read the EDID before falling back to allocating and registering
its own adapter.
Make sure to drop the references taken by i2c_get_adapter() when falling
back to allocating an adapter as well as on late errors to allow the
looked up adapter to be deregistered.
Fixes: 1b082ccf59 ("gma500: Add Oaktrail support")
Cc: stable@vger.kernel.org # 3.3
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Link: https://patch.msgid.link/20260508144446.59722-4-johan@kernel.org
The LVDS init code looks up an I2C adapter using i2c_get_adapter() and
tries to read the EDID before falling back to allocating and registering
its own adapter.
The error handling does not separate these cases so on a late init
failure it will try to deregister and free also an adapter that had
previously been registered. Since i2c_get_adapter() takes another
reference to the adapter, deregistration hangs indefinitely while
waiting for the reference to be released.
Fix this by only destroying adapters allocated during LVDS init on
errors.
Fixes: a57ebfc0b4 ("drm/gma500: Make oaktrail lvds use ddc adapter from drm_connector")
Cc: stable@vger.kernel.org # 6.0
Cc: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Link: https://patch.msgid.link/20260508144446.59722-3-johan@kernel.org
Make sure to drop the reference taken to the I2C adapter (and its
module) when setting up HDMI to allow the adapter to be deregistered.
Fixes: 1b082ccf59 ("gma500: Add Oaktrail support")
Cc: stable@vger.kernel.org # 3.3
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Link: https://patch.msgid.link/20260508144446.59722-2-johan@kernel.org
Add the __counted_by_ptr() compiler attribute to 'array' to improve
bounds checking via CONFIG_UBSAN_BOUNDS and CONFIG_FORTIFY_SOURCE.
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Link: https://patch.msgid.link/20260415122542.370926-6-thorsten.blum@linux.dev
Signed-off-by: Kees Cook <kees@kernel.org>
kasprintf_strarray() returns an array of N strings and kfree_strarray()
also frees N entries. However, kasprintf_strarray() currently allocates
N+1 char pointers. Allocate exactly N pointers instead of N+1.
Also update the kernel-doc for @n.
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Link: https://patch.msgid.link/20260415122542.370926-4-thorsten.blum@linux.dev
Signed-off-by: Kees Cook <kees@kernel.org>
The backtrace() function and execinfo.h are GNU extensions available
in glibc but not in non-glibc C libraries such as musl. Building KVM
selftests with musl-gcc fails with:
lib/assert.c:9:10: fatal error: execinfo.h: No such file or directory
Fix this by guarding the inclusion of execinfo.h and the stack dumping
logic under #ifdef __GLIBC__. For non-glibc builds, provide a local
stub for test_dump_stack().
Suggested-by: Aqib Faruqui <aqibaf@amazon.com>
Suggested-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Hisam Mehboob <hisamshar@gmail.com>
Link: https://patch.msgid.link/20260409153846.1502656-2-hisamshar@gmail.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
commit 446fcce2a5 ("Revert "x86: kvm: rate-limit global clock updates"")
dropped the rate limiting for KVM_REQ_GLOBAL_CLOCK_UPDATE.
As a result, kvm_arch_vcpu_load() can queue global clock update requests
every time a vCPU is scheduled when the master clock is disabled or when
the vCPU is loaded for the first time.
Restore the throttling with a per-VM ratelimit state and gate
KVM_REQ_GLOBAL_CLOCK_UPDATE through __ratelimit(), so frequent vCPU
scheduling does not generate a steady stream of redundant clock update
requests.
Fixes: 446fcce2a5 ("Revert "x86: kvm: rate-limit global clock updates"")
Signed-off-by: Lei Chen <lei.chen@smartx.com>
Reported-by: Jaroslav Pulchart <jaroslav.pulchart@gooddata.com>
Closes: https://lore.kernel.org/all/CAK8fFZ5gY8_Mw2A=iZVFNVKQNrXQzVsn-HTd+Me9K6ZfmdgA+Q@mail.gmail.com/
Link: https://patch.msgid.link/20260409142226.2581-1-lei.chen@smartx.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
x86_virt_invoke_kvm_emergency_callback() reaches rcu_dereference()
through machine_crash_shutdown() with IRQs disabled but with RCU not
necessarily watching the crashing CPU, which triggers a suspicious
RCU usage splat on debug kernels (CONFIG_PROVE_RCU=y) during
panic/kdump:
WARNING: suspicious RCU usage
arch/x86/virt/hw.c:52 suspicious rcu_dereference_check() usage!
rcu_scheduler_active = 2, debug_locks = 1
1 lock held by tee/11119:
#0: ffff8881fa32c440 (sb_writers#3){.+.+}-{0:0}, at: ksys_write
Call Trace:
<TASK>
dump_stack_lvl+0x84/0xd0
lockdep_rcu_suspicious.cold+0x37/0x8f
x86_virt_invoke_kvm_emergency_callback+0x5f/0x70
x86_svm_emergency_disable_virtualization_cpu+0x2a/0x30
x86_virt_emergency_disable_virtualization_cpu+0x6b/0x90
native_machine_crash_shutdown+0x72/0x170
__crash_kexec+0x137/0x280
panic+0xce/0xd0
sysrq_handle_crash+0x1f/0x20
__handle_sysrq.cold+0x192/0x335
write_sysrq_trigger+0x8c/0xc0
proc_reg_write+0x1c3/0x3c0
vfs_write+0x1d0/0xf80
ksys_write+0x116/0x250
do_syscall_64+0x11c/0x1480
entry_SYSCALL_64_after_hwframe+0x76/0x7e
</TASK>
A truly correct fix is non-trivial: the RCU usage genuinely is wrong in
panic context (RCU may ignore the crashing CPU during synchronization),
and a concurrent KVM module unload could in principle race with the
callback read; see commit 2baa33a8dd ("KVM: x86: Leave user-return
notifier registered on reboot/shutdown") which notes that nothing
prevents module unload during panic/reboot.
However, the alternatives are worse:
- smp_store_release()/smp_load_acquire() handles ordering but not
liveness; the kernel still needs to keep the module text alive
while the callback is in flight.
- Taking a lock in the panic path is risky — any lock could be held
by a CPU that has already been NMI'd to a halt.
Use rcu_dereference_raw() to silence the splat and accept the
vanishingly small remaining race. Panic context inherently cannot
guarantee complete correctness; the goal here is to keep debug builds
quiet on the kdump path so the splat doesn't obscure the actual
kernel state being captured.
Reproducible on a debug kernel (CONFIG_PROVE_LOCKING=y, CONFIG_PROVE_RCU=y)
with kvm_amd or kvm_intel loaded by triggering kdump:
echo c > /proc/sysrq-trigger
Suggested-by: Sean Christopherson <seanjc@google.com>
Fixes: 428afac5a8 ("KVM: x86: Move bulk of emergency virtualizaton logic to virt subsystem")
Signed-off-by: Mikhail Gavrilov <mikhail.v.gavrilov@gmail.com>
Acked-by: Sean Christopherson <seanjc@google.com>
Link: https://patch.msgid.link/20260504235435.90957-1-mikhail.v.gavrilov@gmail.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Include both linux/mman.h (the kernel provided version) and sys/mman.h (the
libc provided version) throughout KVM selftests, by way of kvm_syscalls.h
(which should have been including sys/mman.h anyways). Pulling in the
kernel's version fixes compilation errors with the guest_memfd test on
older versions of libc due to a recent commit adding MADV_COLLAPSE testing.
In file included from include/kvm_util.h:8,
from guest_memfd_test.c:21:
guest_memfd_test.c: In function ‘test_collapse’:
guest_memfd_test.c:219:47: error: ‘MADV_COLLAPSE’ undeclared (first use in this function); did you mean ‘MADV_COLD’?
219 | TEST_ASSERT_EQ(madvise(mem, pmd_size, MADV_COLLAPSE), -1);
| ^~~~~~~~~~~~~
include/test_util.h:62:16: note: in definition of macro ‘TEST_ASSERT_EQ’
62 | typeof(a) __a = (a); \
| ^
guest_memfd_test.c:219:47: note: each undeclared identifier is reported only once for each function it appears in
219 | TEST_ASSERT_EQ(madvise(mem, pmd_size, MADV_COLLAPSE), -1);
| ^~~~~~~~~~~~~
include/test_util.h:62:16: note: in definition of macro ‘TEST_ASSERT_EQ’
62 | typeof(a) __a = (a); \
| ^
Route the includes through kvm_syscalls.h to try and avoid a future game
of whack-a-mole, i.e. so that future expansion of test coverage doesn't run
into the same problem.
To discourage use of sys/mman.h, opportunistically include the kernel's
version of mman.h in test_util.h as it only needs MAP_SHARED, i.e. only
needs the full set of kernel defs, not the libc syscall wrappers.
Fixes: 9830209b4a ("KVM: selftests: Test MADV_COLLAPSE on guest_memfd")
Reported-by: Rick Edgecombe <rick.p.edgecombe@intel.com>
Closes: https://lore.kernel.org/all/20260427204313.50741-1-rick.p.edgecombe@intel.com
Link: https://patch.msgid.link/20260428012503.1213654-1-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
RongQing reported that the MCA polling interval doesn't halve when an
error gets logged. It was traced down to the commit in Fixes:, because:
mce_timer_fn()
|-> mce_poll_banks()
|-> machine_check_poll()
|-> mce_log()
which will queue the work and return.
Now, back in mce_timer_fn():
/*
* Alert userspace if needed. If we logged an MCE, reduce the polling
* interval, otherwise increase the polling interval.
*/
if (mce_notify_irq())
<--- here we haven't ran the notifier chain yet so mce_need_notify is
not set yet so this won't hit and we won't halve the interval iv.
Now the notifier chain runs. mce_early_notifier() sets the bit, does
mce_notify_irq(), that clears the bit and then the notifier chain
a little later logs the error.
So this is a silly timing issue.
But, that's all unnecessary.
All it needs to happen here is, the "should we notify of a logged MCE"
mce_notify_irq() asks, should be simply a question to the mce gen pool:
"Are you empty?"
And that then turns into a simple yes or no answer and it all
JustWorks(tm).
So do that and also distribute the functionality where it belongs:
- Print that MCE events have been logged in mce_log()
- Trigger the mcelog tool specific work in the first notifier
As a result, mce_notify_irq() can go now.
Fixes: 011d826111 ("RAS: Add a Corrected Errors Collector")
Reported-by: Li RongQing <lirongqing@baidu.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Qiuxu Zhuo <qiuxu.zhuo@intel.com>
Tested-by: Qiuxu Zhuo <qiuxu.zhuo@intel.com>
Link: https://lore.kernel.org/r/20260112082747.2842-1-lirongqing@baidu.com
A few fixes for kexec handover and liveupdate:
* make sure KHO is skipped for crash kernel
* fix error reporting in memfd preservation if it fails mid-loop
* don't allow preserving memfds whose page count exceeds UINT_MAX
* fix documentation of memfd seals preservation to match the code
-----BEGIN PGP SIGNATURE-----
iQFEBAABCgAuFiEEeOVYVaWZL5900a/pOQOGJssO/ZEFAmoET5gQHHJwcHRAa2Vy
bmVsLm9yZwAKCRA5A4Ymyw79kVfdB/99gLJy40MO9ZCHSxRQD9TE7Fbuv71flVuD
wmDz43UOyDIEp+qCB0VcNQPG3v+UINygUMGHkhOG4fgKLm0bEORXIJHNr8sTXYYk
LuxN8g+Xv1P/qkucEIXy1oB38okg9cORhlfrCOiwpWBjNt5/AqZYKWttDshuZiIM
kjIKEDtTZ/nDLXjkWAa4Qs4MtBjqTVCrG3glSNHT0yiFDEkAejXbr4RZ/Ght/9pz
FwHzTfdIOnecvOCD2OHVQx9TJluaP57mlxTkOXJV6OApg0wiHjohl0Xcerh+JfB4
HAdF7xpr5Sk/BQVc3ygsDKwfTVfB/eYMfCoyUkXg9AVhcoBXmhD0
=luI7
-----END PGP SIGNATURE-----
Merge tag 'fixes-2026-05-13' of git://git.kernel.org/pub/scm/linux/kernel/git/liveupdate/linux
Pull liveupdate fixes from Mike Rapoport:
"A few fixes for kexec handover and liveupdate:
- make sure KHO is skipped for crash kernel
- fix error reporting in memfd preservation if it fails mid-loop
- don't allow preserving memfds whose page count exceeds UINT_MAX
- fix documentation of memfd seals preservation to match the code"
* tag 'fixes-2026-05-13' of git://git.kernel.org/pub/scm/linux/kernel/git/liveupdate/linux:
mm/memfd_luo: document preservation of file seals
mm/memfd_luo: reject memfds whose page count exceeds UINT_MAX
mm/memfd_luo: report error when restoring a folio fails mid-loop
kho: skip KHO for crash kernel
During recent GGTT refactoring we missed to drop now unused field
from the xe_tile. Drop it now.
Fixes: e904c56ba6 ("drm/xe: Rewrite GGTT VF initialization")
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Reviewed-by: Maarten Lankhorst <dev@lankhorst.se>
Link: https://patch.msgid.link/20260510205605.642-1-michal.wajdeczko@intel.com
(cherry picked from commit 21d5a871f5)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
dev->nthreads is derived from the user-requested queue count before the
ADD command, but the kernel may reduce nr_hw_queues (capped to
nr_cpu_ids). When the VM has fewer CPUs than requested queues, the
daemon creates more handler threads than there are kernel queues.
In non-batch mode, the extra threads access uninitialized queues
(q_depth=0), submit zero io_uring SQEs, and block forever in
io_cqring_wait. In batch mode, the extra threads cause similar hangs
during device removal.
In both cases, the stuck threads prevent the daemon from closing the
char device, holding the last ublk_device reference and causing
ublk_ctrl_del_dev() to hang in wait_event_interruptible().
Fix by capping dev->nthreads to the kernel-returned nr_hw_queues after
the ADD command completes. per_io_tasks mode is excluded because threads
interleave across all queues, so nthreads > nr_hw_queues is valid.
Fixes: abe54c1603 ("selftests: ublk: kublk: decouple ublk_queues from ublk server threads")
Signed-off-by: Ming Lei <tom.leiming@gmail.com>
Link: https://patch.msgid.link/20260513101941.1373998-1-tom.leiming@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Shin'ichiro reported hard to reproduce unaligned write errors with zoned
block devices. Under normal operation conditions (e.g. running XFS on an
SMR disk), these errors are nearly impossible to trigger. But using a
"slow" kernel with many debug options enables and some specific use
cases (e.g. fio zbd test case 46), the errors can be reproduced fairly
easily.
The unaligned write errors come from mishandling a valid reference
counting pattern of zone write plugs. Such pattern triggers for instance
if a process A writes a zone (not necessarilly to the full state),
another process B immediately resets the zone and immediately following
the completion of the zone reset, starts issuing writes to the zone.
With such pattern, in some cases, the zone write plugs worker thread of
the device may still be holding a reference to the zone write plug of
the zone taken when process A was writing to the zone. The following
zone reset from process B marks the zone as dead but does not remove the
zone write plug from the device hash table as a reference to the plug
still exist. Once process B starts issuing new writes, the zone write
plug is seen as dead and the writes from process B are immediately
failed, despite this write pattern being perfectly legal.
Fix this by allowing restoring a dead zone write plug to a live state if
a write is issued to the zone when the zone is: marked as dead, empty
and the write sector corresponds to the first sector of the zone (that
is, the write is aligned to the zone write pointer). This is done with
the new helper function disk_check_zone_wplug_dead(), which restores a
dead zone write plug to a live state by clearing the BLK_ZONE_WPLUG_DEAD
flag and restoring the initial reference to the zone write plug taken
when the plug was added to the device hash table.
Reported-by: Shin'ichiro Kawasaki <shinichiro.kawasaki@wdc.com>
Fixes: b7d4ffb510 ("block: fix zone write plug removal")
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Tested-by: Shin'ichiro Kawasaki <shinichiro.kawasaki@wdc.com>
Link: https://patch.msgid.link/20260513111129.108809-1-dlemoal@kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Commit b1798910fc7f ("drbd: move UAPI headers to include/uapi/linux/")
broke compilation on targets without a hosted libc:
./usr/include/linux/drbd.h:18:10: fatal error: sys/types.h: No such
file or directory
The underlying issue is that there were some constructs left over in
those headers that don't belong in uapi.
Drop the __KERNEL__-gated split in drbd.h. The !__KERNEL__ branch pulls
in <sys/types.h>, <sys/wait.h> and <limits.h> for symbols that the
header does not actually reference; they were carried over from when
this lived in include/linux/.
Replace <asm/types.h> and the entire #ifdef block with the standard
UAPI combo <linux/types.h> + <asm/byteorder.h>, which provides
__u32/__u64/__s32 and __{LITTLE,BIG}_ENDIAN_BITFIELD in both kernel
and userspace contexts.
drbd_limits.h references some enum values and the DRBD_PROT_C define
from drbd.h, but does not include it. Add the missing include while
we're here.
Drop the unprefixed DEBUG_RANGE_CHECK from drbd_limits.h. It has no
in-kernel users and pollutes the userspace namespace.
Switch the drbd.h and drbd_limits.h include guards to the _UAPI_LINUX_*
convention already used by drbd_genl.h.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202605101346.V2wwJqv1-lkp@intel.com/
Fixes: b1798910fc7f ("drbd: move UAPI headers to include/uapi/linux/")
Signed-off-by: Christoph Böhmwalder <christoph.boehmwalder@linbit.com>
Link: https://patch.msgid.link/20260513110343.3170338-1-christoph.boehmwalder@linbit.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
-----BEGIN PGP SIGNATURE-----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=tVLe
-----END PGP SIGNATURE-----
Merge tag 'ib-mfd-gpio-v7.2' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd into gpio/for-next
Immutable branch between MFD and GPIO due for the v7.2 merge window
There have been reports of host hangs caused by CET virtualization.
Until these are analyzed further, introduce a module parameter that
makes it possible to easily disable it.
Link: https://lore.kernel.org/all/85548beb-1486-40f9-beb4-632c78e3360b@proxmox.com/
Cc: David Riley <d.riley@proxmox.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
On DSI 6G platforms the IO address space is internally adjusted by
io_offset. Later this adjusted address might be used for memory dumping.
However the size that is used for memory dumping isn't adjusted to
account for the io_offset, leading to the potential access to the
unmapped region. Lower ctrl_size by the io_offset value to prevent
access past the mapped area.
msm_disp_snapshot_add_block+0x1d4/0x3c8 [msm] (P)
msm_dsi_host_snapshot+0x4c/0x78 [msm]
msm_dsi_snapshot+0x28/0x50 [msm]
msm_disp_snapshot_capture_state+0x74/0x140 [msm]
msm_disp_snapshot_state_sync+0x60/0x90 [msm]
_msm_disp_snapshot_work+0x30/0x90 [msm]
kthread_worker_fn+0xdc/0x460
kthread+0x120/0x140
Fixes: bac2c6a62e ("drm/msm: get rid of msm_iomap_size")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Patchwork: https://patchwork.freedesktop.org/patch/721747/
Link: https://lore.kernel.org/r/20260428-msm-fix-dsi-dump-v1-1-5d4cb5ccfac7@oss.qualcomm.com
The Kaanapali DPU catalog defines kaanapali_cwb[] with the correct
CWB base addresses for this platform (0x169200, 0x169600, 0x16a200,
0x16a600), but the dpu_kaanapali_cfg struct was mistakenly pointing
to sm8650_cwb instead. The SM8650 CWB blocks sit at completely
different offsets (0x66200, 0x66600, 0x7E200, 0x7E600), so using
them on Kaanapali would program CWB registers at wrong addresses,
corrupting unrelated hardware blocks and breaking writeback capture.
Fix this by pointing .cwb to the correct kaanapali_cwb array.
Fixes: 83fe2cd56b ("drm/msm/dpu: Add support for Kaanapali DPU")
Signed-off-by: Mahadevan P <mahadevan.p@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Patchwork: https://patchwork.freedesktop.org/patch/721444/
Link: https://lore.kernel.org/r/20260428-kaanapali_cwb-v1-1-51fdb2c65498@oss.qualcomm.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
The UV scanlines is calculated with (height + 1) / 2 unlike
the Y scanlines, add back the correct scanlines calculation
for UBWC YUV formats.
Fixes: 2f3ff6ab8f ("drm/msm/dpu: use standard functions in _dpu_format_populate_plane_sizes_ubwc()")
Fixes: ada4a19ed2 ("drm/msm/dpu: rewrite _dpu_format_populate_plane_sizes_ubwc()")
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Patchwork: https://patchwork.freedesktop.org/patch/718309/
Link: https://lore.kernel.org/r/20260414-topic-sm8x50-msm-dpu1-formats-qc10c-v1-1-0b62325b9030@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
VBIF register range is 0x3000 long. DisplayPort block has few too short
ranges and misses four more address spaces. Similarly first part of DSI
space should be 0x300 long.
No practical impact, except when existing code is being re-used in new
contributions.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Patchwork: https://patchwork.freedesktop.org/patch/716460/
Link: https://lore.kernel.org/r/20260405-dts-qcom-display-regs-v2-5-34f4024c65dc@oss.qualcomm.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
VBIF register range is 0x3000 long. DisplayPort block has few too short
ranges and misses four more address spaces.
No practical impact, except when existing code is being re-used in new
contributions.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Patchwork: https://patchwork.freedesktop.org/patch/716453/
Link: https://lore.kernel.org/r/20260405-dts-qcom-display-regs-v2-4-34f4024c65dc@oss.qualcomm.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
VBIF register range is 0x3000 long, so correct the example. No
practical impact, except when existing code is being re-used in new
contributions.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Patchwork: https://patchwork.freedesktop.org/patch/716454/
Link: https://lore.kernel.org/r/20260405-dts-qcom-display-regs-v2-3-34f4024c65dc@oss.qualcomm.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
DisplayPort on Qualcomm SoCs like SM8650 and compatible SM8750 supports
audio and there is already DTS having cells and sound-name-prefix. The
"else:" clause for non-EDP and non-aux-bus cases already requires
'#sound-dai-cells', so it should actually reference the dai-common.yaml
for other properties, as pointed out by dtbs_check warnings like:
sm8650-hdk-display-card-rear-camera-card.dtb:
displayport-controller@af54000 (qcom,sm8650-dp): Unevaluated properties are not allowed ('sound-name-prefix' was unexpected)
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Patchwork: https://patchwork.freedesktop.org/patch/716452/
Link: https://lore.kernel.org/r/20260405-dts-qcom-display-regs-v2-2-34f4024c65dc@oss.qualcomm.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
DP on Qualcomm SM8650 come with nine address ranges, so describe the
remaining ones as optional to keep ABI backwards compatible. Driver
also does not need them to operate correctly.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Patchwork: https://patchwork.freedesktop.org/patch/716450/
Link: https://lore.kernel.org/r/20260405-dts-qcom-display-regs-v2-1-34f4024c65dc@oss.qualcomm.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
io_prep_rw_pi() never used the attr_type_mask argument. Callers already
validate sqe->attr_type_mask before invoking the helper (only
IORING_RW_ATTR_FLAG_PI is supported today). Remove the dead parameter to
avoid implying further interpretation happens here.
Signed-off-by: Yang Xiuwei <yangxiuwei@kylinos.cn>
Link: https://patch.msgid.link/20260513094303.866533-1-yangxiuwei@kylinos.cn
Signed-off-by: Jens Axboe <axboe@kernel.dk>
On Lenovo Yoga 7 14AGP11 (83TD), the WACF2200 touchscreen controller
is wired via I2C2 (AMDI0010:02) with its interrupt on GPIO pin 157
(confirmed via ACPI _CRS GpioInt decode). After amd_gpio_irq_init()
clears all GPIO interrupts at boot, pin 157 is never re-enabled,
preventing the touchscreen from signalling the driver.
Windows keeps GPIO 157 INTERRUPT_ENABLE (bit 11) and INTERRUPT_MASK
(bit 12) set after initialisation. Add a DMI quirk to restore these
bits after amd_gpio_irq_init() on this hardware.
Assisted-by: Claude:claude-sonnet-4-6
Assisted-by: GPT-Codex:gpt-5.2-codex
Signed-off-by: Hardik Prakash <hardikprakash.official@gmail.com>
Acked-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Signed-off-by: Linus Walleij <linusw@kernel.org>
Add support for the EIO GPIO controller found on
xa2ve3288 silicon.
The EIO GPIO block provides access to multiplexed I/O pins exposed
through the EIO interface. Only bank 0 and bank 1 are connected to
external MIO pins, with 26 GPIOs per bank (52 GPIOs total). This
change extends the Zynq GPIO driver to support the EIO GPIO
variant.
Signed-off-by: Shubhrajyoti Datta <shubhrajyoti.datta@amd.com>
Link: https://patch.msgid.link/20260512060917.2096456-4-shubhrajyoti.datta@amd.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
EIO (Extended IO) GPIO is a Xilinx IP block that exposes
multiplexed I/O pins through an EIO interface.
The EIO GPIO block has 2 banks with 26 GPIOs each (52 total).
The GPIO width cannot be determined from the hardware registers,
the driver relies on the compatible string to select the correct
bank/pin configuration. A new compatible is therefore required.
The block is currently present on xa2ve3288 silicon.
The compatible string uses version 1.0 matching the IP core version.
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Shubhrajyoti Datta <shubhrajyoti.datta@amd.com>
Link: https://patch.msgid.link/20260512060917.2096456-3-shubhrajyoti.datta@amd.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Document the designated initializer behavior for overlapping storage
between NAME and MEMBERS, and clarify the implications for static
initialization to help avoid unintended overwrites.
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Link: https://patch.msgid.link/agD0R-kNbg9YMOCT@kspp
Signed-off-by: Kees Cook <kees@kernel.org>
Every platform driver can be forced to match a device that doesn't match
its list of device IDs because of device_match_driver_override(), so
platform drivers that rely on the existence of a device's ACPI companion
object need to verify its presence.
Accordingly, add a requisite ACPI_COMPANION() check against NULL to the
wilco_ec event driver.
Fixes: 27d58498f6 ("platform/chrome: wilco_ec: event: Convert to a platform driver")
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://lore.kernel.org/r/2076666.usQuhbGJ8B@rafael.j.wysocki
Signed-off-by: Tzung-Bi Shih <tzungbi@kernel.org>
Every platform driver can be forced to match a device that doesn't match
its list of device IDs because of device_match_driver_override(), so
platform drivers that rely on the existence of a device's ACPI companion
object need to verify its presence.
Accordingly, add a requisite ACPI_COMPANION() check against NULL to the
chromeos_tbmc driver.
Fixes: a2676ead25 ("platform/chrome: chromeos_tbmc: Convert to a platform driver")
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://lore.kernel.org/r/1875121.VLH7GnMWUR@rafael.j.wysocki
Signed-off-by: Tzung-Bi Shih <tzungbi@kernel.org>
Every platform driver can be forced to match a device that doesn't match
its list of device IDs because of device_match_driver_override(), so
platform drivers that rely on the existence of a device's ACPI companion
object need to verify its presence.
Accordingly, add a requisite ACPI_COMPANION() check against NULL to the
chromeos_privacy_screen driver.
Fixes: d3c2872ae3 ("platform/chrome: Convert ChromeOS privacy-screen driver to platform")
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://lore.kernel.org/r/3357444.5fSG56mABF@rafael.j.wysocki
Signed-off-by: Tzung-Bi Shih <tzungbi@kernel.org>
When updating the driver to match latest datasheet to suspend access to
URAM when suspending DMA transfers a corner-case was missed, URAM access
will not be suspended if WoL is enabled. This lead to the error message
(correctly) being triggered as URAM access is not suspended even tho
it's requested as part of stopping DMA.
Avoid checking if URAM access is suspended and printing the error
message if WoL is enabled when we suspend the system, as we know it will
not be.
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Closes: https://lore.kernel.org/all/CAMuHMdWnjV%3DHGE1o08zLhUfTgOSene5fYx1J5GG10mB%2BToq8qg@mail.gmail.com/
Fixes: 353d8e7989 ("net: ethernet: ravb: Suspend and resume the transmission flow")
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Sai Krishna <saikrishnag@marvell.com>
Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
ethnl_bitmap32_not_zero() should return true if some bit in [start, end)
is set:
- Fix inverted memchr_inv() sense: return true when the scan finds a
non-zero byte, not when the middle words are all zero.
- Return false for an empty interval (end <= start).
- When end is 32-bit aligned, indices in [start, end) do not include any
bits from map[end_word]; return false after earlier checks found no
non-zero data.
Fixes: 10b518d4e6 ("ethtool: netlink bitset handling")
Signed-off-by: Chenguang Zhao <zhaochenguang@kylinos.cn>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
