Place definitions and implementations (incl. macro invocations) of
the `Zeroable` trait first in the relevant section of `src/lib.rs`,
followed by the ZeroableOption trait and its implementations.
Rename `impl_non_zero_int_zeroable_option` to `impl_zeroable_option`
for consistency.
This commit should not introduce any functional changes.
Signed-off-by: Mohamad Alsadhan <mo@sdhn.cc>
Reviewed-by: Gary Guo <gary@garyguo.net>
Link: https://patch.msgid.link/20260428-pin-init-sync-v1-3-07f9bd3859fb@garyguo.net
Signed-off-by: Gary Guo <gary@garyguo.net>
Following the kernel minimum version bump in commit f32fb9c58a ("rust:
bump Rust minimum supported version to 1.85.0 (Debian Trixie)"), bump
pin-init's minimum Rust version to 1.82.
This removes the `lint_reasons` feature which is stabilized in 1.81 and the
`raw_ref_ops` and `new_uninit` features which are stabilized in 1.82.
Given we do not use any features that are stabilized in 1.82..=1.85 range,
and pin-init crate is useful for other projects which may have their own
MSRV requirements, the minimum version is not straightly bumped to 1.85.
Reviewed-by: Benno Lossin <lossin@kernel.org>
Link: https://patch.msgid.link/20260428-pin-init-sync-v1-2-07f9bd3859fb@garyguo.net
Signed-off-by: Gary Guo <gary@garyguo.net>
There was a recent request in kernel [1] to mark as `#[inline]` the
simple `From::from()` functions implemented for `Error`.
Thus mark all of the existing
impl From<...> for Error {
fn from(err: ...) -> Self {
...
}
}
functions as `#[inline]`.
While in pin-init crate the relevant code is just examples, it
nevertheless does not hurt to use good practice for them.
Suggested-by: Gary Guo <gary@garyguo.net>
Link: https://lore.kernel.org/all/8403c8b7a832b5274743816eb77abfa4@garyguo.net/ [1]
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Gary Guo <gary@garyguo.net>
[ Reworded commit message - Gary ]
Link: https://patch.msgid.link/20260428-pin-init-sync-v1-1-07f9bd3859fb@garyguo.net
Signed-off-by: Gary Guo <gary@garyguo.net>
scx_fail_parent() leaves cgroup tasks at (state=NONE, sched=parent,
sched_class=ext) until the parent itself is torn down by the scx_error() it
raised. When the later root_disable iterates them, two paths trip on NONE.
scx_disable_and_exit_task() re-enters the wrapper at NONE: the inner switch
returns early but the trailing scx_set_task_sched(p, NULL) clobbers the
parent sched left by scx_fail_parent(), and scx_set_task_state(p, NONE)
wastes a write on an already-NONE task. switched_from_scx() then calls
scx_disable_task(), which WARNs on non-ENABLED state and writes state=READY,
producing a NONE -> READY transition the validation matrix rejects.
Treat NONE as "nothing to do" in both paths. Add a NONE early-return at the
top of scx_disable_and_exit_task() and a parallel NONE check in
switched_from_scx() next to task_dead_and_done().
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Andrea Righi <arighi@nvidia.com>
scx_sub_enable_workfn()'s init pass and scx_sub_disable() migration both
drop the rq lock to call __scx_init_task() against the other sched. A
TASK_DEAD @p can fall through sched_ext_dead() in that window.
sched_ext_dead() runs ops.exit_task() on the sched @p was attached to, not
on the sched whose init just completed, so the new allocation leaks.
Reuse the DEAD signal set by sched_ext_dead(). After __scx_init_task()
returns, take task_rq_lock(p) and check for DEAD; on hit, call
scx_sub_init_cancel_task() against the sub sched the init ran for and drop
@p; on miss, proceed as before.
Reported-by: zhidao su <suzhidao@xiaomi.com>
Link: https://lore.kernel.org/all/20260429133155.3825247-1-suzhidao@xiaomi.com/
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Andrea Righi <arighi@nvidia.com>
scx_root_enable_workfn() drops the iter rq lock for ops.init_task() and a
TASK_DEAD @p can fall through sched_ext_dead() in that window. The race hits
when sched_ext_dead() observes SCX_TASK_INIT (the intermediate state before
@p->scx.sched is published) and dereferences NULL via SCX_HAS_OP(NULL,
exit_task), or observes SCX_TASK_NONE during the unlocked init window and
skips cleanup so exit_task() never runs.
Add SCX_TASK_INIT_BEGIN. The enable path writes NONE -> INIT_BEGIN under the
iter rq lock, then takes the rq lock again after init to walk INIT_BEGIN ->
INIT -> READY. sched_ext_dead() that wins the rq-lock race observes
INIT_BEGIN and sets DEAD without calling into ops; the post-init recheck
unwinds via scx_sub_init_cancel_task().
scx_fork() runs single-threaded against sched_ext_dead() (the task is not on
scx_tasks until scx_post_fork() adds it) so its INIT_BEGIN -> INIT walk
needs no rq-lock pairing; it rolls back to NONE on ops.init_task() failure.
The validation matrix grows the INIT_BEGIN row and the INIT_BEGIN -> DEAD
edge; INIT now requires INIT_BEGIN as the predecessor. scx_sub_disable()'s
migration writes INIT_BEGIN as a synthetic predecessor to satisfy the
tightened verification.
The sub-sched paths still race with sched_ext_dead() during the unlocked
init window. This will be fixed by the next patch.
Reported-by: zhidao su <suzhidao@xiaomi.com>
Link: https://lore.kernel.org/all/20260429133155.3825247-1-suzhidao@xiaomi.com/
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Andrea Righi <arighi@nvidia.com>
SCX_TASK_OFF_TASKS marked tasks already through sched_ext_dead() so cgroup
task iteration would skip them. This can be expressed better with a task
state. Replace the flag with SCX_TASK_DEAD.
scx_disable_and_exit_task() resets state to NONE on its way out, so
sched_ext_dead() now sets DEAD after the wrapper returns. The validation
matrix grows NONE -> DEAD, warns on DEAD -> NONE, and tightens READY's
predecessor to INIT or ENABLED so the new DEAD value cannot silently
transition to READY.
Prepares for the following enable vs dead race fix.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Andrea Righi <arighi@nvidia.com>
Prepare for the SCX_TASK_INIT_BEGIN/DEAD work that follows by collapsing the
scx_init_task() helper. Move the SCX_TASK_RESET_RUNNABLE_AT setting into
scx_set_task_state() on the INIT transition (it was set unconditionally at
every INIT site through the scx_init_task() helper), inline scx_init_task()
into scx_fork() and scx_root_enable_workfn(), and drop the helper.
As a side effect, scx_sub_disable() migration sequence now also sets
RESET_RUNNABLE_AT (it previously wrote INIT directly without going through
scx_init_task()). The flag triggers a runnable_at reset on the next
set_task_runnable(), which is harmless on a task that has just been moved
between scheds.
On root-enable, p->scx.flags is written without the task's rq lock. The task
isn't visible to scx yet, and a follow-up patch restores the lock-held
write.
v2: Note p->scx.flags rq-lock relaxation on root-enable path. (Andrea)
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Andrea Righi <arighi@nvidia.com>
Cleanups in preparation for the state-machine work that follows:
- Convert three sub-sched call sites that open-code
rcu_assign_pointer(p->scx.sched, ...) to scx_set_task_sched().
- Move scx_get_task_state()/scx_set_task_state() above the SCX task iter
section so scx_task_iter_next_locked() can use them without a forward
declaration.
No functional change.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Andrea Righi <arighi@nvidia.com>
The for_each_child_of_node() loop captures mdio_np via break,
holding the refcount. of_mdiobus_register() does not consume the
reference, so it leaks on success.
Put it after registration.
Fixes: e6ad767305 ("drivers: net: Add APM X-Gene SoC ethernet driver support.")
Signed-off-by: Shitalkumar Gandhi <shitalkumar.gandhi@cambiumnetworks.com>
Link: https://patch.msgid.link/20260507142024.811543-1-shitalkumar.gandhi@cambiumnetworks.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
- fix integer overflow on buff_pos, by Lyes Bourennani
- fix invalid tp_meter access during teardown, by Jiexun Wang (2 patches)
- stop caching unowned originator pointers in BAT IV, by Jiexun Wang
- tp_meter: fix tp_num leak on kmalloc failure, by Sven Eckelmann
- fix BLA refcounting issues, by Sven Eckelmann (3 patches)
-----BEGIN PGP SIGNATURE-----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=JP6m
-----END PGP SIGNATURE-----
Merge tag 'batadv-net-pullrequest-20260508' of https://git.open-mesh.org/batadv
Simon Wunderlich says:
====================
Here are some batman-adv bugfixes:
- fix integer overflow on buff_pos, by Lyes Bourennani
- fix invalid tp_meter access during teardown, by Jiexun Wang (2 patches)
- stop caching unowned originator pointers in BAT IV, by Jiexun Wang
- tp_meter: fix tp_num leak on kmalloc failure, by Sven Eckelmann
- fix BLA refcounting issues, by Sven Eckelmann (3 patches)
* tag 'batadv-net-pullrequest-20260508' of https://git.open-mesh.org/batadv:
batman-adv: bla: put backbone reference on failed claim hash insert
batman-adv: bla: only purge non-released claims
batman-adv: bla: prevent use-after-free when deleting claims
batman-adv: tp_meter: fix tp_num leak on kmalloc failure
batman-adv: stop caching unowned originator pointers in BAT IV
batman-adv: stop tp_meter sessions during mesh teardown
batman-adv: reject new tp_meter sessions during teardown
batman-adv: fix integer overflow on buff_pos
====================
Link: https://patch.msgid.link/20260508154314.12817-1-sw@simonwunderlich.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Move the phc->active check and resp pointer assignment to after
acquiring the spinlock. Previously, phc->active was checked without
holding the lock, and resp was cached from ena_dev->phc.virt_addr
before the lock was acquired.
If ena_com_phc_destroy() runs between the lockless active check and
the lock acquisition, it sets active=false, releases the lock, frees
the DMA memory, and sets virt_addr=NULL. The get_timestamp path would
then read a NULL virt_addr and dereference it.
With both the active check and the pointer read under the lock,
destroy cannot free the memory while get_timestamp is using it.
Fixes: e0ea34158e ("net: ena: Add PHC support in the ENA driver")
Cc: stable@vger.kernel.org
Signed-off-by: Arthur Kiyanovski <akiyano@amazon.com>
Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Link: https://patch.msgid.link/20260508062126.7273-1-akiyano@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
find_one_sb_stid() skips stids whose sc_status is non-zero, but the
SC_TYPE_LAYOUT case in nfsd4_revoke_states() never sets sc_status
before calling nfsd4_close_layout(). The retry loop therefore finds
the same layout stid on every iteration, hanging the revoker
indefinitely.
Fixes: 1e33e1414b ("nfsd: allow layout state to be admin-revoked.")
Reported-by: Dai Ngo <dai.ngo@oracle.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Tested-by: Dai Ngo <dai.ngo@oracle.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
sunrpc_cache_requests_snapshot() filters requests with
crq->seqno <= min_seqno. The min_seqno for the first netlink
dump call is cb->args[0] which is 0. Since next_seqno was
initialized to 0, the very first cache request got seqno=0
and was silently skipped by the snapshot (0 <= 0 is true).
This caused netlink-based GET_REQS to return 0 pending requests
even when a request was queued, preventing mountd from resolving
cache entries (particularly expkey/nfsd.fh). The unresolved
CACHE_PENDING state blocked all further notifications for the
entry, leading to permanent NFS4ERR_DELAY hangs.
Start next_seqno at 1 so all requests have seqno >= 1 and pass
the snapshot filter when min_seqno is 0.
Fixes: facc4e3c80 ("sunrpc: split cache_detail queue into request and reader lists")
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
When delegated attributes are given on open, the file is opened with
NOCMTIME and modifying operations do not update mtime/ctime as to not get
out-of-sync with the client's delegated view. However, for COPY operation,
the server should update its view of mtime/ctime and reflect that in any
GETATTR queries.
Fixes: e5e9b24ab8 ("nfsd: freeze c/mtime updates with outstanding WRITE_ATTRS delegation")
Cc: stable@vger.kernel.org
Signed-off-by: Olga Kornievskaia <okorniev@redhat.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
When delegated attributes are given on open, the file is opened with
NOCMTIME and modifying operations do not update mtime/ctime as to not get
out-of-sync with the client's delegated view. However, for CLONE operation,
the server should update its view of mtime/ctime and reflect that in any
GETATTR queries.
Fixes: e5e9b24ab8 ("nfsd: freeze c/mtime updates with outstanding WRITE_ATTRS delegation")
Cc: stable@vger.kernel.org
Signed-off-by: Olga Kornievskaia <okorniev@redhat.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
RFC 8881, section 10.4.3 doesn't say anything about caching the file
size in the delegation record, nor does it say anything about comparing
a cached file size with the size reported by the client in the
CB_GETATTR reply for the purpose of determining if the client holds
modified data for the file.
What section 10.4.3 of RFC 8881 does say is that the server should
compare the *current* file size with the size reported by the client
holding the delegation in the CB_GETATTR reply, and if they differ to
treat it as a modification regardless of the change attribute retrieved
via the CB_GETATTR.
Doing otherwise would cause the server to believe the client holding the
delegation has a modified version of the file, even if the client
flushed the modifications to the server prior to the CB_GETATTR. This
would have the added side effect of subsequent CB_GETATTRs causing
updates to the mtime, ctime, and change attribute even if the client
holding the delegation makes no further updates to the file.
Modify nfsd4_deleg_getattr_conflict() to obtain the current file size
via i_size_read(). Retain the ncf_cur_fsize field, since it's a
convenient way to return the file size back to nfsd4_encode_fattr4(),
but don't use it for the purpose of detecting file changes. Remove the
unnecessary initialization of ncf_cur_fsize in nfs4_open_delegation().
Also, if we recall the delegation (because the client didn't respond to
the CB_GETATTR), then skip the logic that checks the nfs4_cb_fattr
fields.
Fixes: c5967721e1 ("NFSD: handle GETATTR conflict with write delegation")
Cc: stable@vger.kernel.org
Signed-off-by: Scott Mayhew <smayhew@redhat.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
ethtool.h includes linux/typelimits.h which is a relatively new header
not yet shipped in most distro kernel-header packages. Without the
explicit entry, the build silently falls through to -idirafter.
dev_energymodel.h is a new YNL family whose uapi header is not in
system paths at all and was missing a CFLAGS entry entirely.
Signed-off-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20260508204114.205896-2-sdf@fomichev.me
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Previously, it was overlooked that the watchdog could reset the system
directly. So, a workaround using the interrupt which called
emergency_restart() was implemented. We now configure the controller
when booting properly to allow watchdog resets directly. Thus, remove
the interrupt workaround.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Herve Codina <herve.codina@bootlin.com>
Link: https://lore.kernel.org/r/20260507102410.43384-4-wsa+renesas@sang-engineering.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
The RK3528 uses the same watchdog block as all previous Rockchip SoCs.
So add a compatible for it to the soc-list.
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20260506092420.3320031-1-heiko@sntech.de
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
OF_GPIO is selected automatically on all OF systems. Any symbols it
controls also provide stubs so there's really no reason to select it
explicitly. We could simply remove the dependency but in order to avoid
a new symbol popping up for everyone in make config - just convert it to
requiring CONFIG_OF.
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260506081600.4921-1-bartosz.golaszewski@oss.qualcomm.com
[groeck: Resolved conflict; updated dependencies to require OF _or_ ACPI]
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
AMD Elan support was removed from the upstream kernel with commit
8b793a92d8 ("x86/cpu: Remove M486/M486SX/ELAN support"). Its
watchdog driver can no longer be enabled except for test builds.
Remove it.
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
`wdt.rst` is only about the Watchdog from "Industrial Computer Source"
(ICS). Change the title and rename the file to better express this.
Add missing SPDX license identifier `GPL-2.0-or-later` same as code to
silence `checkpatch`.
Fix wrong link to sample driver in drivers/watchdog/smsc37b787_wdt.c.
Signed-off-by: Philipp Hahn <phahn-oss@avm.de>
Link: https://lore.kernel.org/r/5a71979d8e8ab8e0a30de33f6aa2540b3b5dc1ee.1777972790.git.phahn-oss@avm.de
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
The Lenovo SE10 Gen 2 platform uses a watchdog chip from the same family.
Watchdog functionality is the same, so update the driver with the new chip
ID.
Add the Gen 2 MTM's to enable support on the platform.
Tested on SE10 G2.
Signed-off-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Link: https://lore.kernel.org/r/20260428124954.1193450-1-mpearson-lenovo@squebb.ca
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Add support for the Andes ATCWDT200 watchdog timer. The driver implements
programmable reset and interrupt timers, and includes automatic detection
of the supported IntTime bit-width.
Integrated with the Linux watchdog framework, it supports basic operations
including start, stop, ping, timeout configuration, and system reset via
the restart handler.
Signed-off-by: CL Wang <cl634@andestech.com>
Link: https://lore.kernel.org/r/20260115081444.2452357-3-cl634@andestech.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Add the devicetree binding documentation for the Andes ATCWDT200
watchdog timer.
ATCWDT200 is the IP name, which is embedded in AndesCore-based
platforms or SoCs such as AE350 and Qilai.
Signed-off-by: CL Wang <cl634@andestech.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/20260115081444.2452357-2-cl634@andestech.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
AT91_WDT_WDDIS (bit 15) applies to SAMA5/AT91SAM9261 and
AT91_SAM9X60_WDDIS (bit 12) to SAM9X60/SAMA7G5/SAM9X75. Update
comments to reflect this and add SAMA7G5 and SAM9X75 datasheet
references to the file header.
Signed-off-by: Balakrishnan Sambath <balakrishnan.s@microchip.com>
Reviewed-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20260302113310.133989-3-balakrishnan.s@microchip.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
On i.MX94, watchdog sources clock from bus clock that will be always on
during the lifecycle of Linux. There is a Low Power Clock Gating(LPCG)
between the bus clock and watchdog, but the LPCG is not exported for
software to control, it is hardware automatically controlled. When
Cortex-A55 executes WFI during suspend flow, the LPCG will automatically
gate off the clock to stop watchdog and resume clock when Cortex-A55 is
woke up.
So watchdog could always be alive to protect Linux, except Cortex-A
platform WFI is executed in Linux suspend flow.
Introduce a new hardware feature flag to indicate CPU low-power-mode
auto clock gating support, and use it to avoid stopping the watchdog
during suspend when LPCG can safely keep it running.
Add i.MX94-specific watchdog hardware data and DT compatible entry to
enable this behavior.
Signed-off-by: Ranjani Vaidyanathan <ranjani.vaidyanathan@nxp.com>
[peng.fan@nxp.com: rewrite commit log for clarity]
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://lore.kernel.org/r/20260206-imx94-wdog-v2-1-4dd725faec1f@nxp.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
This configures the reaction between NMI and reset for WWD.
On K3 SoCs other than AM62L SoC [0], watchdog reset output is routed
to the ESM module which can subsequently route the signal to safety
master or SoC reset. On AM62L, the watchdog reset output is routed
to the SoC HW reset block. So, add a new compatible for AM62L to add
SoC data and configure reaction to reset instead of NMI.
[0] https://www.ti.com/product/AM62L
Signed-off-by: Judith Mendez <jm@ti.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20260206234255.380530-3-jm@ti.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
This driver currently only supports builds against a PIC32 target, or
with COMPILE_TEST on MIPS. Now that commit 0f8a61ca78 ("watchdog:
pic32-dmt: update include to use pic32.h from platform_data") is merged,
it's possible to compile this driver on other architectures.
To avoid future breakage of this driver in the future, let's update the
Kconfig so that it can be built with COMPILE_TEST enabled on all
architectures.
Signed-off-by: Brian Masney <bmasney@redhat.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20260222-watchdog-pic32-v1-2-a2538aa528d1@redhat.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
This driver currently only supports builds against a PIC32 target, or
with COMPILE_TEST on MIPS. Now that commit 5aa5879eee ("watchdog:
pic32-wdt: update include to use pic32.h from platform_data") is merged,
it's possible to compile this driver on other architectures.
To avoid future breakage of this driver in the future, let's update the
Kconfig so that it can be built with COMPILE_TEST enabled on all
architectures.
Signed-off-by: Brian Masney <bmasney@redhat.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20260222-watchdog-pic32-v1-1-a2538aa528d1@redhat.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
The DATA-packet handler in rxrpc_input_call_event() and the RESPONSE
handler in rxrpc_verify_response() copy the skb to a linear one before
calling into the security ops only when skb_cloned() is true. An skb
that is not cloned but still carries externally-owned paged fragments
(e.g. SKBFL_SHARED_FRAG set by splice() into a UDP socket via
__ip_append_data, or a chained skb_has_frag_list()) falls through to
the in-place decryption path, which binds the frag pages directly into
the AEAD/skcipher SGL via skb_to_sgvec().
Extend the gate to also unshare when skb_has_frag_list() or
skb_has_shared_frag() is true. This catches the splice-loopback vector
and other externally-shared frag sources while preserving the
zero-copy fast path for skbs whose frags are kernel-private (e.g. NIC
page_pool RX, GRO). The OOM/trace handling already in place is reused.
Fixes: d0d5c0cd1e ("rxrpc: Use skb_unshare() rather than skb_cow_data()")
Cc: stable@vger.kernel.org
Signed-off-by: Hyunwoo Kim <imv4bel@gmail.com>
Reviewed-by: Jiayuan Chen <jiayuan.chen@linux.dev>
Acked-by: David Howells <dhowells@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
- Mark the DDR bus clk critical in the SpaceMiT driver so that
boot doesn't fail
- Fix boot on Mobile EyeQ by creating the auxiliary device for
the ethernet PHY
- Plug an OF node leak in Rockchip rk808 clk driver
-----BEGIN PGP SIGNATURE-----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=yAV8
-----END PGP SIGNATURE-----
Merge tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Pull clk driver fixes from Stephen Boyd:
- Mark the DDR bus clk critical in the SpaceMiT driver so that
boot doesn't fail
- Fix boot on Mobile EyeQ by creating the auxiliary device for
the ethernet PHY
- Plug an OF node leak in Rockchip rk808 clk driver
* tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux:
clk: rk808: fix OF node reference imbalance
MAINTAINERS: add myself as a reviewer for the clk subsystem
reset: eyeq: drop device_set_of_node_from_dev() done by parent
clk: eyeq: add EyeQ5 children auxiliary device for generic PHYs
clk: eyeq: use the auxiliary device creation helper
clk: spacemit: k3: mark top_dclk as CLK_IS_CRITICAL
When clk_enable() fails, the clock was never enabled. Calling
clk_disable() in this error path is incorrect.
Remove the spurious clk_disable() call from the error handling
in spacemit_usb2phy_init().
Fixes: fe4bc1a086 ("phy: spacemit: support K1 USB2.0 PHY controller")
Signed-off-by: Felix Gu <ustc.gu@gmail.com>
Reviewed-by: Ze Huang <huang.ze@linux.dev>
Link: https://patch.msgid.link/20260326-k1-usb3-v1-1-0c2b6adf5185@gmail.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Commit 81af9e40e2 ("phy: qcom: qmp-ufs: Fix SM8650 PCS table for Gear 4")
moved QPHY_V6_PCS_UFS_PLL_CNTL register configuration from the shared
sm8650_ufsphy_g5_pcs table to the SM8650-specific sm8650_ufsphy_pcs base
table to fix Gear 4 operation on SM8650.
However, this change inadvertently broke kaanapali and SM8750 SoCs
which also rely on the shared sm8650_ufsphy_g5_pcs table for Gear 5
configuration but use their own sm8750_ufsphy_pcs base table. After the
change, kaanapali PHYs are left without the required PLL_CNTL = 0x33
setting, causing the PHY PLL to remain at its hardware reset default
value, preventing PLL lock and resulting in DME_LINKSTARTUP timeouts.
Fix this by adding the missing QPHY_V6_PCS_UFS_PLL_CNTL = 0x33 entry
to the sm8750_ufsphy_pcs table, mirroring what the original commit
already did for sm8650_ufsphy_pcs.
Cc: stable@vger.kernel.org # v6.19.12
Fixes: 81af9e40e2 ("phy: qcom: qmp-ufs: Fix SM8650 PCS table for Gear 4")
Signed-off-by: Nitin Rawat <nitin.rawat@oss.qualcomm.com>
Reviewed-by: Abel Vesa <abel.vesa@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Manivannan Sadhasivam <mani@kernel.org>
Link: https://patch.msgid.link/20260415104851.2763238-1-nitin.rawat@oss.qualcomm.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The existing PHYPARAM0 tuning values for Exynos7870 are incorrect,
causing the USB 2.0 PHY to fail high-speed negotiation and fall back
to full-speed (12Mbps) operation.
Fix TXVREFTUNE (transmitter voltage reference) from 14 to 3,
TXRESTUNE (transmitter impedance) from 3 to 2, and SQRXTUNE
(squelch threshold) from 6 to 5. Also explicitly set
TXPREEMPPULSETUNE to 0, which was previously missing from the
tuning table despite being included in the register mask.
All values are derived from the vendor kernel for the Samsung
Galaxy A6 (SM-A600FN), as no public hardware documentation is
available for the Exynos7870 USB DRD PHY. With these corrections,
the PHY successfully negotiates high-speed (480Mbps) operation.
Fixes: 588d5d20ca ("phy: exynos5-usbdrd: add exynos7870 USBDRD support")
Cc: stable@vger.kernel.org
Tested-by: Kaustabh Chakraborty <kauschluss@disroot.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Łukasz Lebiedziński <kernel@lvkasz.us>
Link: https://patch.msgid.link/20260406135627.234835-1-kernel@lvkasz.us
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The existing code reads a single hs_term_range_adj value from bit field
[10:7] of FUSE_SKU_CALIB_0 and applies it to all USB2 pads uniformly.
However, on SoCs that support per-pad termination, each pad has its own
hs_term_range_adj field: pad 0 in FUSE_SKU_CALIB_0[10:7], and pads 1-3
in FUSE_USB_CALIB_EXT_0 at bit offsets [8:5], [12:9], and [16:13]
respectively.
Fix the calibration by reading per-pad values from the appropriate fuse
registers. For SoCs that do not support per-pad termination, replicate
pad 0's value to all pads to maintain existing behavior.
Add a has_per_pad_term flag to the SoC data to indicate whether per-pad
termination values are available in FUSE_USB_CALIB_EXT_0.
Fixes: 1ef535c6ba ("phy: tegra: xusb: Add Tegra194 support")
Cc: stable@vger.kernel.org
Signed-off-by: Wayne Chang <waynec@nvidia.com>
Signed-off-by: Wei-Cheng Chen <weichengc@nvidia.com>
Reviewed-by: Jon Hunter <jonathanh@nvidia.com>
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Link: https://patch.msgid.link/20260504033305.2283145-1-weichengc@nvidia.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The mvebu_a3700_utmi_phy_power_off() function tries to modify the
USB2_PHY_CTRL register by using the IO address of the PHY IP block along
with the readl/writel IO accessors. However, the register exist in the
USB miscellaneous register space, and as such it must be accessed via
regmap like it is done in the mvebu_a3700_utmi_phy_power_on() function.
Change the code to use regmap_update_bits() for modífying the register
to fix this.
Fixes: cc8b7a0ae8 ("phy: add A3700 UTMI PHY driver")
Signed-off-by: Gabor Juhos <j4g8y7@gmail.com>
Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://patch.msgid.link/20260321-a3700-utmi-fix-usb2_phy_ctrl-access-v1-1-6005ff4b5058@gmail.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
