Commit graph

298,991 commits

Author SHA1 Message Date
Rik van Riel
67f96aa252 mm: make swapin readahead skip over holes
Ever since abandoning the virtual scan of processes, for scalability
reasons, swap space has been a little more fragmented than before.  This
can lead to the situation where a large memory user is killed, swap space
ends up full of "holes" and swapin readahead is totally ineffective.

On my home system, after killing a leaky firefox it took over an hour to
page just under 2GB of memory back in, slowing the virtual machines down
to a crawl.

This patch makes swapin readahead simply skip over holes, instead of
stopping at them.  This allows the system to swap things back in at rates
of several MB/second, instead of a few hundred kB/second.

The checks done in valid_swaphandles are already done in
read_swap_cache_async as well, allowing us to remove a fair amount of
code.

[akpm@linux-foundation.org: fix it for page_cluster >= 32]
Signed-off-by: Rik van Riel <riel@redhat.com>
Cc: Minchan Kim <minchan.kim@gmail.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@gmail.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Mel Gorman <mgorman@suse.de>
Cc: Adrian Drzewiecki <z@drze.net>
Cc: Hugh Dickins <hughd@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-03-21 17:54:56 -07:00
Hillf Danton
c38446cc65 mm: vmscan: fix misused nr_reclaimed in shrink_mem_cgroup_zone()
The value of nr_reclaimed is the number of pages reclaimed in the current
round of the loop, whereas nr_to_reclaim should be compared with the
number of pages reclaimed in all rounds.

In each round of the loop, reclaimed pages are cut off from the reclaim
goal, and the loop stops once the goal achieved.

Signed-off-by: Hillf Danton <dhillf@gmail.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Rik van Riel <riel@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Michal Hocko <mhocko@suse.cz>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-03-21 17:54:56 -07:00
Konstantin Khlebnikov
69c978232a mm: make get_mm_counter static-inline
Make get_mm_counter() always static inline, it is simple enough for that.
And remove unused set_mm_counter()

bloat-o-meter:

add/remove: 0/1 grow/shrink: 4/12 up/down: 99/-341 (-242)
function                                     old     new   delta
try_to_unmap_one                             886     952     +66
sys_remap_file_pages                        1214    1230     +16
dup_mm                                      1684    1700     +16
do_exit                                     2277    2278      +1
zap_page_range                               208     205      -3
unmap_region                                 304     296      -8
static.oom_kill_process                      554     546      -8
try_to_unmap_file                           1716    1700     -16
getrusage                                    925     909     -16
flush_old_exec                              1704    1688     -16
static.dump_header                           416     390     -26
acct_update_integrals                        218     187     -31
do_task_stat                                2986    2954     -32
get_mm_counter                                34       -     -34
xacct_add_tsk                                371     334     -37
task_statm                                   172     118     -54
task_mem                                     383     323     -60

try_to_unmap_one() grows because update_hiwater_rss() now completely inline.

Signed-off-by: Konstantin Khlebnikov <khlebnikov@openvz.org>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Acked-by: Kirill A. Shutemov <kirill@shutemov.name>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-03-21 17:54:55 -07:00
Hillf Danton
6131728914 mm/vmscan.c: cleanup with s/reclaim_mode/isolate_mode/
With tons of reclaim_mode (defined as one field of struct scan_control)
already in the file, it is clearer to rename the local reclaim_mode when
setting up the isolation mode.

Signed-off-by: Hillf Danton <dhillf@gmail.com>
Acked-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Acked-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Reviewed-by: Rik van Riel <riel@redhat.com>
Cc: David Rientjes <rientjes@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-03-21 17:54:55 -07:00
Konstantin Khlebnikov
c3f0327f8e mm: add rss counters consistency check
Warn about non-zero rss counters at final mmdrop.

This check will prevent reoccurences of bugs such as that fixed in "mm:
fix rss count leakage during migration".

I didn't hide this check under CONFIG_VM_DEBUG because it rather small and
rss counters cover whole page-table management, so this is a good
invariant.

Signed-off-by: Konstantin Khlebnikov <khlebnikov@openvz.org>
Cc: Hugh Dickins <hughd@google.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-03-21 17:54:55 -07:00
David Rientjes
dc3f21eade mm, oom: introduce independent oom killer ratelimit state
printk_ratelimit() uses the global ratelimit state for all printks.  The
oom killer should not be subjected to this state just because another
subsystem or driver may be flooding the kernel log.

This patch introduces printk ratelimiting specifically for the oom killer.

Signed-off-by: David Rientjes <rientjes@google.com>
Acked-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Reviewed-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-03-21 17:54:55 -07:00
David Rientjes
8447d950e7 mm, oom: do not emit oom killer warning if chosen thread is already exiting
If a thread is chosen for oom kill and is already PF_EXITING, then the oom
killer simply sets TIF_MEMDIE and returns.  This allows the thread to have
access to memory reserves so that it may quickly exit.  This logic is
preceeded with a comment saying there's no need to alarm the sysadmin.
This patch adds truth to that statement.

There's no need to emit any warning about the oom condition if the thread
is already exiting since it will not be killed.  In this condition, just
silently return the oom killer since its only giving access to memory
reserves and is otherwise a no-op.

Acked-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Acked-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Signed-off-by: David Rientjes <rientjes@google.com>
Acked-by: Michal Hocko <mhocko@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-03-21 17:54:55 -07:00
David Rientjes
647f2bdf4a mm, oom: fold oom_kill_task() into oom_kill_process()
oom_kill_task() has a single caller, so fold it into its parent function,
oom_kill_process().  Slightly reduces the number of lines in the oom
killer.

Acked-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Reviewed-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Signed-off-by: David Rientjes <rientjes@google.com>
Acked-by: Michal Hocko <mhocko@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-03-21 17:54:55 -07:00
David Rientjes
2a1c9b1fc0 mm, oom: avoid looping when chosen thread detaches its mm
oom_kill_task() returns non-zero iff the chosen process does not have any
threads with an attached ->mm.

In such a case, it's better to just return to the page allocator and retry
the allocation because memory could have been freed in the interim and the
oom condition may no longer exist.  It's unnecessary to loop in the oom
killer and find another thread to kill.

This allows both oom_kill_task() and oom_kill_process() to be converted to
void functions.  If the oom condition persists, the oom killer will be
recalled.

Acked-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Signed-off-by: David Rientjes <rientjes@google.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Acked-by: Michal Hocko <mhocko@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-03-21 17:54:55 -07:00
Matt Fleming
ce24d8a142 sparc: use block_sigmask()
Use the new helper function introduced in commit 5e6292c0f2 ("signal:
add block_sigmask() for adding sigmask to current->blocked") which
centralises the code for updating current->blocked after successfully
delivering a signal and reduces the amount of duplicate code across
architectures.  In the past some architectures got this code wrong, so
using this helper function should stop that from happening again.

Acked-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: "David S. Miller" <davem@davemloft.net>
Signed-off-by: Matt Fleming <matt.fleming@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-03-21 17:54:55 -07:00
Matt Fleming
d12f7c4a2f xtensa: use set_current_blocked() and block_sigmask()
As described in commit e6fa16ab9c ("signal: sigprocmask() should do
retarget_shared_pending()") the modification of current->blocked is
incorrect as we need to check whether the signal we're about to block is
pending in the shared queue.

Also, use the new helper function introduced in commit 5e6292c0f2
("signal: add block_sigmask() for adding sigmask to current->blocked")
which centralises the code for updating current->blocked after
successfully delivering a signal and reduces the amount of duplicate code
across architectures.  In the past some architectures got this code wrong,
so using this helper function should stop that from happening again.

Acked-by: Oleg Nesterov <oleg@redhat.com>
Cc: Chris Zankel <chris@zankel.net>
Signed-off-by: Matt Fleming <matt.fleming@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-03-21 17:54:55 -07:00
Matt Fleming
3785006ac3 xtensa: don't mask signals if we fail to setup signal stack
setup_frame() needs to return an indication of whether it succeeded or
failed in setting up the signal stack frame.  If setup_frame() fails then
we must not modify current->blocked.

Acked-by: Oleg Nesterov <oleg@redhat.com>
Cc: Chris Zankel <chris@zankel.net>
Signed-off-by: Matt Fleming <matt.fleming@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-03-21 17:54:55 -07:00
Matt Fleming
ff6d21e7aa xtensa: no need to reset handler if SA_ONESHOT
get_signal_to_deliver() already resets the signal handler if SA_ONESHOT
is set in ka->sa.sa_flags, there's no need to do it again in
handle_signal().

Furthermore, because we were modifying ka->sa.sa_handler (which is a
copy of sighand->action[]) instead of sighand->action[] the original
code actually had no effect on signal delivery.

Acked-by: Oleg Nesterov <oleg@redhat.com>
Cc: Chris Zankel <chris@zankel.net>
Signed-off-by: Matt Fleming <matt.fleming@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-03-21 17:54:55 -07:00
Matt Fleming
fa47ac5902 xtensa: don't reimplement force_sigsegv()
Instead of open coding the sequence from force_sigsegv() just call it.
This also fixes a bug because we were modifying ka->sa.sa_handler (which
is a copy of sighand->action[]), whereas the intention of the code was to
modify sighand->action[] directly.

As the original code was working with a copy it had no effect on signal
delivery.

Acked-by: Oleg Nesterov <oleg@redhat.com>
Cc: Chris Zankel <chris@zankel.net>
Signed-off-by: Matt Fleming <matt.fleming@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-03-21 17:54:55 -07:00
Earl Chew
7904ac8424 seq_file: fix mishandling of consecutive pread() invocations.
The following program illustrates the problem:

    char buf[8192];

    int fd = open("/proc/self/maps", O_RDONLY);

    n = pread(fd, buf, sizeof(buf), 0);
    printf("%d\n", n);

    /* lseek(fd, 0, SEEK_CUR); */ /* Uncomment to work around */

    n = pread(fd, buf, sizeof(buf), 0);
    printf("%d\n", n);

The second printf() prints zero, but uncommenting the lseek() corrects its
behaviour.

To fix, make seq_read() mirror seq_lseek() when processing changes in
*ppos.  Restore m->version first, then if required traverse and update
read_pos on success.

Addresses https://bugzilla.kernel.org/show_bug.cgi?id=11856

Signed-off-by: Earl Chew <echew@ixiacom.com>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-03-21 17:54:54 -07:00
Marcos Paulo de Souza
dc716e96f5 drivers/idle/intel_idle.c: fix confusing code identation
Fix a code indentation in the function intel_idle_cpu_init that looks
confusing.o

Suggested-by: Srivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com>
Reviewed-by: Srivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com>
Signed-off-by: Marcos Paulo de Souza <marcos.mage@gmail.com>
Cc: "Brown, Len" <len.brown@intel.com>
Cc: Len Brown <lenb@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-03-21 17:54:54 -07:00
Andrew Morton
1de5b41cd3 fs/namei.c: fix warnings on 32-bit
i386 allnoconfig:

  fs/namei.c: In function 'has_zero':
  fs/namei.c:1617: warning: integer constant is too large for 'unsigned long' type
  fs/namei.c:1617: warning: integer constant is too large for 'unsigned long' type
  fs/namei.c: In function 'hash_name':
  fs/namei.c:1635: warning: integer constant is too large for 'unsigned long' type

There must be a tidier way of doing this.

Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-03-21 17:54:54 -07:00
Andrea Arcangeli
1a5a9906d4 mm: thp: fix pmd_bad() triggering in code paths holding mmap_sem read mode
In some cases it may happen that pmd_none_or_clear_bad() is called with
the mmap_sem hold in read mode.  In those cases the huge page faults can
allocate hugepmds under pmd_none_or_clear_bad() and that can trigger a
false positive from pmd_bad() that will not like to see a pmd
materializing as trans huge.

It's not khugepaged causing the problem, khugepaged holds the mmap_sem
in write mode (and all those sites must hold the mmap_sem in read mode
to prevent pagetables to go away from under them, during code review it
seems vm86 mode on 32bit kernels requires that too unless it's
restricted to 1 thread per process or UP builds).  The race is only with
the huge pagefaults that can convert a pmd_none() into a
pmd_trans_huge().

Effectively all these pmd_none_or_clear_bad() sites running with
mmap_sem in read mode are somewhat speculative with the page faults, and
the result is always undefined when they run simultaneously.  This is
probably why it wasn't common to run into this.  For example if the
madvise(MADV_DONTNEED) runs zap_page_range() shortly before the page
fault, the hugepage will not be zapped, if the page fault runs first it
will be zapped.

Altering pmd_bad() not to error out if it finds hugepmds won't be enough
to fix this, because zap_pmd_range would then proceed to call
zap_pte_range (which would be incorrect if the pmd become a
pmd_trans_huge()).

The simplest way to fix this is to read the pmd in the local stack
(regardless of what we read, no need of actual CPU barriers, only
compiler barrier needed), and be sure it is not changing under the code
that computes its value.  Even if the real pmd is changing under the
value we hold on the stack, we don't care.  If we actually end up in
zap_pte_range it means the pmd was not none already and it was not huge,
and it can't become huge from under us (khugepaged locking explained
above).

All we need is to enforce that there is no way anymore that in a code
path like below, pmd_trans_huge can be false, but pmd_none_or_clear_bad
can run into a hugepmd.  The overhead of a barrier() is just a compiler
tweak and should not be measurable (I only added it for THP builds).  I
don't exclude different compiler versions may have prevented the race
too by caching the value of *pmd on the stack (that hasn't been
verified, but it wouldn't be impossible considering
pmd_none_or_clear_bad, pmd_bad, pmd_trans_huge, pmd_none are all inlines
and there's no external function called in between pmd_trans_huge and
pmd_none_or_clear_bad).

		if (pmd_trans_huge(*pmd)) {
			if (next-addr != HPAGE_PMD_SIZE) {
				VM_BUG_ON(!rwsem_is_locked(&tlb->mm->mmap_sem));
				split_huge_page_pmd(vma->vm_mm, pmd);
			} else if (zap_huge_pmd(tlb, vma, pmd, addr))
				continue;
			/* fall through */
		}
		if (pmd_none_or_clear_bad(pmd))

Because this race condition could be exercised without special
privileges this was reported in CVE-2012-1179.

The race was identified and fully explained by Ulrich who debugged it.
I'm quoting his accurate explanation below, for reference.

====== start quote =======
      mapcount 0 page_mapcount 1
      kernel BUG at mm/huge_memory.c:1384!

    At some point prior to the panic, a "bad pmd ..." message similar to the
    following is logged on the console:

      mm/memory.c:145: bad pmd ffff8800376e1f98(80000000314000e7).

    The "bad pmd ..." message is logged by pmd_clear_bad() before it clears
    the page's PMD table entry.

        143 void pmd_clear_bad(pmd_t *pmd)
        144 {
    ->  145         pmd_ERROR(*pmd);
        146         pmd_clear(pmd);
        147 }

    After the PMD table entry has been cleared, there is an inconsistency
    between the actual number of PMD table entries that are mapping the page
    and the page's map count (_mapcount field in struct page). When the page
    is subsequently reclaimed, __split_huge_page() detects this inconsistency.

       1381         if (mapcount != page_mapcount(page))
       1382                 printk(KERN_ERR "mapcount %d page_mapcount %d\n",
       1383                        mapcount, page_mapcount(page));
    -> 1384         BUG_ON(mapcount != page_mapcount(page));

    The root cause of the problem is a race of two threads in a multithreaded
    process. Thread B incurs a page fault on a virtual address that has never
    been accessed (PMD entry is zero) while Thread A is executing an madvise()
    system call on a virtual address within the same 2 MB (huge page) range.

               virtual address space
              .---------------------.
              |                     |
              |                     |
            .-|---------------------|
            | |                     |
            | |                     |<-- B(fault)
            | |                     |
      2 MB  | |/////////////////////|-.
      huge <  |/////////////////////|  > A(range)
      page  | |/////////////////////|-'
            | |                     |
            | |                     |
            '-|---------------------|
              |                     |
              |                     |
              '---------------------'

    - Thread A is executing an madvise(..., MADV_DONTNEED) system call
      on the virtual address range "A(range)" shown in the picture.

    sys_madvise
      // Acquire the semaphore in shared mode.
      down_read(&current->mm->mmap_sem)
      ...
      madvise_vma
        switch (behavior)
        case MADV_DONTNEED:
             madvise_dontneed
               zap_page_range
                 unmap_vmas
                   unmap_page_range
                     zap_pud_range
                       zap_pmd_range
                         //
                         // Assume that this huge page has never been accessed.
                         // I.e. content of the PMD entry is zero (not mapped).
                         //
                         if (pmd_trans_huge(*pmd)) {
                             // We don't get here due to the above assumption.
                         }
                         //
                         // Assume that Thread B incurred a page fault and
             .---------> // sneaks in here as shown below.
             |           //
             |           if (pmd_none_or_clear_bad(pmd))
             |               {
             |                 if (unlikely(pmd_bad(*pmd)))
             |                     pmd_clear_bad
             |                     {
             |                       pmd_ERROR
             |                         // Log "bad pmd ..." message here.
             |                       pmd_clear
             |                         // Clear the page's PMD entry.
             |                         // Thread B incremented the map count
             |                         // in page_add_new_anon_rmap(), but
             |                         // now the page is no longer mapped
             |                         // by a PMD entry (-> inconsistency).
             |                     }
             |               }
             |
             v
    - Thread B is handling a page fault on virtual address "B(fault)" shown
      in the picture.

    ...
    do_page_fault
      __do_page_fault
        // Acquire the semaphore in shared mode.
        down_read_trylock(&mm->mmap_sem)
        ...
        handle_mm_fault
          if (pmd_none(*pmd) && transparent_hugepage_enabled(vma))
              // We get here due to the above assumption (PMD entry is zero).
              do_huge_pmd_anonymous_page
                alloc_hugepage_vma
                  // Allocate a new transparent huge page here.
                ...
                __do_huge_pmd_anonymous_page
                  ...
                  spin_lock(&mm->page_table_lock)
                  ...
                  page_add_new_anon_rmap
                    // Here we increment the page's map count (starts at -1).
                    atomic_set(&page->_mapcount, 0)
                  set_pmd_at
                    // Here we set the page's PMD entry which will be cleared
                    // when Thread A calls pmd_clear_bad().
                  ...
                  spin_unlock(&mm->page_table_lock)

    The mmap_sem does not prevent the race because both threads are acquiring
    it in shared mode (down_read).  Thread B holds the page_table_lock while
    the page's map count and PMD table entry are updated.  However, Thread A
    does not synchronize on that lock.

====== end quote =======

[akpm@linux-foundation.org: checkpatch fixes]
Reported-by: Ulrich Obergfell <uobergfe@redhat.com>
Signed-off-by: Andrea Arcangeli <aarcange@redhat.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Hugh Dickins <hughd@google.com>
Cc: Dave Jones <davej@redhat.com>
Acked-by: Larry Woodman <lwoodman@redhat.com>
Acked-by: Rik van Riel <riel@redhat.com>
Cc: <stable@vger.kernel.org>		[2.6.38+]
Cc: Mark Salter <msalter@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-03-21 17:54:54 -07:00
Jeff Mahoney
49b25e0540 btrfs: enhance transaction abort infrastructure
Signed-off-by: Jeff Mahoney <jeffm@suse.com>
2012-03-22 01:45:40 +01:00
Jeff Mahoney
4da3511342 btrfs: add varargs to btrfs_error
btrfs currently handles most errors with BUG_ON. This patch is a work-in-
 progress but aims to handle most errors other than internal logic
 errors and ENOMEM more gracefully.

 This iteration prevents most crashes but can run into lockups with
 the page lock on occasion when the timing "works out."

Signed-off-by: Jeff Mahoney <jeffm@suse.com>
2012-03-22 01:45:40 +01:00
Mark Fasheh
3acd395317 btrfs: Remove BUG_ON from __finish_chunk_alloc()
btrfs_alloc_chunk() unconditionally BUGs on any error returned from
__finish_chunk_alloc() so there's no need for two BUG_ON lines. Remove the
one from __finish_chunk_alloc().

Signed-off-by: Mark Fasheh <mfasheh@suse.de>
2012-03-22 01:45:39 +01:00
Mark Fasheh
1dd4602fa7 btrfs: Remove BUG_ON from __btrfs_alloc_chunk()
We BUG_ON() error from add_extent_mapping(), but that error looks pretty
easy to bubble back up - as far as I can tell there have not been any
permanent modifications to fs state at that point.

Signed-off-by: Mark Fasheh <mfasheh@suse.de>
2012-03-22 01:45:39 +01:00
Mark Fasheh
2cdcecbc15 btrfs: Don't BUG_ON insert errors in btrfs_alloc_dev_extent()
The only caller of btrfs_alloc_dev_extent() is __btrfs_alloc_chunk() which
already bugs on any error returned. We can remove the BUG_ON's in
btrfs_alloc_dev_extent() then since __btrfs_alloc_chunk() will "catch" them
anyway.

Signed-off-by: Mark Fasheh <mfasheh@suse.de>
2012-03-22 01:45:38 +01:00
Mark Fasheh
305a26af5b btrfs: Go readonly on tree errors in balance_level
balace_level() seems to deal with missing tree nodes by BUG_ON(). Instead,
we can easily just set the file system readonly and bubble -EROFS back up
the stack.

Signed-off-by: Mark Fasheh <mfasheh@suse.com>
2012-03-22 01:45:38 +01:00
Mark Fasheh
b68dc2a93e btrfs: Don't BUG_ON errors from update_ref_for_cow()
__btrfs_cow_block(), the only caller of update_ref_for_cow() will BUG_ON()
any error return.  Instead, we can go read-only fs as update_ref_for_cow()
manipulates disk data in a way which doesn't look like it's easily rolled
back.

Signed-off-by: Mark Fasheh <mfasheh@suse.de>
2012-03-22 01:45:38 +01:00
Mark Fasheh
e5df957328 btrfs: Go readonly on bad extent refs in update_ref_for_cow()
update_ref_for_cow() will BUG_ON() after it's call to
btrfs_lookup_extent_info() if no existing references are found.  Since refs
are computed directly from disk, this should be treated as a corruption
instead of a logic error.

Signed-off-by: Mark Fasheh <mfasheh@suse.de>
2012-03-22 01:45:37 +01:00
Mark Fasheh
4ed1d16e94 btrfs: Don't BUG_ON errors in __finish_chunk_alloc()
All callers of __finish_chunk_alloc() BUG_ON() return value, so it's trivial
for us to always bubble up any errors caught in __finish_chunk_alloc() to be
caught there.

Signed-off-by: Mark Fasheh <mfasheh@suse.de>
2012-03-22 01:45:37 +01:00
Mark Fasheh
0678b61851 btrfs: Don't BUG_ON kzalloc error in btrfs_lookup_csums_range()
Unfortunately it isn't enough to just exit here - the kzalloc() happens in a
loop and the allocated items are added to a linked list whose head is passed
in from the caller.

To fix the BUG_ON() and also provide the semantic that the list passed in is
only modified on success, I create function-local temporary list that we add
items too. If no error is met, that list is spliced to the callers at the
end of the function. Otherwise the list will be walked and all items freed
before the error value is returned.

I did a simple test on this patch by forcing an error at the kzalloc() point
and verifying that when this hits (git clone seemed to exercise this), the
function throws the proper error. Unfortunately but predictably, we later
hit a BUG_ON(ret) type line that still hasn't been fixed up ;)

Signed-off-by: Mark Fasheh <mfasheh@suse.com>
2012-03-22 01:45:37 +01:00
Mark Fasheh
be1a5564fd btrfs: Don't BUG_ON() errors in update_ref_for_cow()
The only caller of update_ref_for_cow() is __btrfs_cow_block() which was
originally ignoring any return values. update_ref_for_cow() however doesn't
look like a candidate to become a void function - there are a few places
where errors can occur.

So instead I changed update_ref_for_cow() to bubble all errors up (instead
of BUG_ON). __btrfs_cow_block() was then updated to catch and BUG_ON() any
errors from update_ref_for_cow(). The end effect is that we have no change
in behavior, but about 8 different places where a BUG_ON(ret) was removed.

Obviously a future patch will have to address the BUG_ON() in
__btrfs_cow_block().

Signed-off-by: Mark Fasheh <mfasheh@suse.de>
2012-03-22 01:45:36 +01:00
Mark Fasheh
ce598979be btrfs: Don't BUG_ON errors from btrfs_create_subvol_root()
This is called from only one place - create_subvol() which passes errors
safely back out to it's caller, btrfs_mksubvol where they are handled.

Additionally, btrfs_create_subvol_root() itself bug's needlessly from error
return of btrfs_update_inode(). Since create_subvol() was fixed to catch
errors we can bubble this one up too.

Signed-off-by: Mark Fasheh <mfasheh@suse.com>
2012-03-22 01:45:36 +01:00
Jeff Mahoney
2c536799f1 btrfs: btrfs_drop_snapshot should return int
Commit cb1b69f4 (Btrfs: forced readonly when btrfs_drop_snapshot() fails)
made btrfs_drop_snapshot return void because there were no callers checking
the return value. That is the wrong order to handle error propogation since
the caller will have no idea that an error has occured and continue on
as if nothing went wrong.

Signed-off-by: Jeff Mahoney <jeffm@suse.com>
2012-03-22 01:45:36 +01:00
Jeff Mahoney
3fbe5c02ae btrfs: split extent_state ops
set_extent_bit can do exclusive locking but only when called by lock_extent*,

 Drop the exclusive bits argument except when called by lock_extent.

Signed-off-by: Jeff Mahoney <jeffm@suse.com>
2012-03-22 01:45:35 +01:00
Jeff Mahoney
d0082371cf btrfs: drop gfp_t from lock_extent
lock_extent and unlock_extent are always called with GFP_NOFS, drop the
 argument and use GFP_NOFS consistently.

Signed-off-by: Jeff Mahoney <jeffm@suse.com>
2012-03-22 01:45:35 +01:00
Jeff Mahoney
143bede527 btrfs: return void in functions without error conditions
Signed-off-by: Jeff Mahoney <jeffm@suse.com>
2012-03-22 01:45:34 +01:00
Jeff Mahoney
ffd7b33944 btrfs: __add_reloc_root error push-up
This patch pushes kmalloc errors up to the caller and BUGs in the caller.

The BUG_ON for duplicate reloc tree root insertion is replaced with a
panic explaining the issue.

Signed-off-by: Jeff Mahoney <jeffm@suse.com>
2012-03-22 01:45:34 +01:00
Jeff Mahoney
355808c296 btrfs: ->submit_bio_hook error push-up
This pushes failures from the submit_bio_hook callbacks,
btrfs_submit_bio_hook and btree_submit_bio_hook into the callers, including
callers of submit_one_bio where it catches the failures with BUG_ON.

It also pushes up through the ->readpage_io_failed_hook to
end_bio_extent_writepage where the error is already caught with BUG_ON.

Signed-off-by: Jeff Mahoney <jeffm@suse.com>
2012-03-22 01:45:34 +01:00
Jeff Mahoney
3444a97255 btrfs: Factor out tree->ops->merge_bio_hook call
In submit_extent_page, there's a visually noisy if statement that, in
the midst of other conditions, does the tree dependency for tree->ops
and tree->ops->merge_bio_hook before calling it, and then another
condition afterwards. If an error is returned from merge_bio_hook,
there's no way to catch it. It's considered a routine "1" return
value instead of a failure.

This patch factors out the dependency check into a new local merge_bio
routine and BUG's on an error. The if statement is less noisy as a side-
effect.

Signed-off-by: Jeff Mahoney <jeffm@suse.com>
2012-03-22 01:45:33 +01:00
Jeff Mahoney
0417341e6b btrfs: Simplify btrfs_submit_bio_hook
btrfs_submit_bio_hook currently calls btrfs_bio_wq_end_io in either case
of an if statement that determines one of the arguments.

This patch moves the function call outside of the if statement and uses it
to only determine the different argument. This allows us to catch an
error in one place in a more visually obvious way.

Signed-off-by: Jeff Mahoney <jeffm@suse.com>
2012-03-22 01:45:33 +01:00
Jeff Mahoney
b45a9d8b48 btrfs: btrfs_update_root error push-up
btrfs_update_root BUG's when it can't alloc a path, yet it can recover
from a search error. This patch returns -ENOMEM instead.

Signed-off-by: Jeff Mahoney <jeffm@suse.com>
2012-03-22 01:45:33 +01:00
Jeff Mahoney
200a5c1767 btrfs: find_and_setup_root error push-up
find_and_setup_root BUGs when it encounters an error from
btrfs_find_last_root, which can occur if a path can't be allocated.

This patch pushes it up to its callers where it is already handled.

Signed-off-by: Jeff Mahoney <jeffm@suse.com>
2012-03-22 01:45:32 +01:00
Jeff Mahoney
6763af84a6 btrfs: Remove set bits return from clear_extent_bit
There is only one caller of clear_extent_bit that checks the return value
and it only checks if it's negative. Since there are no users of the
returned bits functionality of clear_extent_bit, stop returning it
and avoid complicating error handling.

Signed-off-by: Jeff Mahoney <jeffm@suse.com>
2012-03-22 01:45:32 +01:00
Jeff Mahoney
538042801a btrfs: avoid NULL deref in btrfs_reserve_extent with DEBUG_ENOSPC
__find_space_info can return NULL but we don't check it before calling
 dump_space_info().

Signed-off-by: Jeff Mahoney <jeffm@suse.com>
2012-03-22 01:45:32 +01:00
Jeff Mahoney
d5c13f927f btrfs: clean_tree_block should panic on observed memory corruption and return void
The only error condition in clean_tree_block is an accounting bug.
 Returning without modifying dirty_metadata_bytes and as if the cleaning
 as been performed may cause problems later so it should panic instead.

 It should probably be a BUG_ON but we have btrfs_panic now.

Signed-off-by: Jeff Mahoney <jeffm@suse.com>
2012-03-22 01:45:31 +01:00
Jeff Mahoney
d16cb050e5 btrfs: Simplify btrfs_insert_root
btrfs_insert_root is just a wrapper for btrfs_insert_item. Just return
the error directly.

Signed-off-by: Jeff Mahoney <jeffm@suse.com>
2012-03-22 01:45:31 +01:00
Jeff Mahoney
cddcd80018 btrfs: Fix kfree of member instead of structure
Correctness fix: The kfree calls in the add_delayed_* functions free
the node that's passed into it, but the node is a member of another
structure. It works because it's always the first member of the
containing structure, but it should really be using the containing
structure itself.

Signed-off-by: Jeff Mahoney <jeffm@suse.com>
2012-03-22 01:45:30 +01:00
Jeff Mahoney
43c04fb1b8 btrfs: Panic on bad rbtree operations
The ordered data and relocation trees have BUG_ONs to protect against
bad tree operations.

This patch replaces them with a panic that will report the problem.

Signed-off-by: Jeff Mahoney <jeffm@suse.com>
2012-03-22 01:45:30 +01:00
Jeff Mahoney
c2d904e086 btrfs: Catch locking failures in {set,clear,convert}_extent_bit
The *_state functions can only return 0 or -EEXIST. This patch addresses
the cases where those functions returning -EEXIST represent a locking
failure. It handles them by panicking with an appropriate error message.

Signed-off-by: Jeff Mahoney <jeffm@suse.com>
2012-03-22 01:45:30 +01:00
Jeff Mahoney
8c34293001 btrfs: Add btrfs_panic()
As part of the effort to eliminate BUG_ON as an error handling
technique, we need to determine which errors are actual logic errors,
which are on-disk corruption, and which are normal runtime errors
e.g. -ENOMEM.

Annotating these error cases is helpful to understand and report them.

This patch adds a btrfs_panic() routine that will either panic
or BUG depending on the new -ofatal_errors={panic,bug} mount option.
Since there are still so many BUG_ONs, it defaults to BUG for now but I
expect that to change once the error handling effort has made
significant progress.

Signed-off-by: Jeff Mahoney <jeffm@suse.com>
2012-03-22 01:45:29 +01:00
stephen hemminger
5676cc7bfe sky2: override for PCI legacy power management
Some BIOS's don't setup power management correctly (what else is
new) and don't allow use of PCI Express power control. Add a special
exception module parameter to allow working around this issue.
Based on slightly different patch by Knut Petersen.

Reported-by: Arkadiusz Miskiewicz <arekm@maven.pl>
Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-03-21 16:54:36 -04:00
Linus Torvalds
30d73f3752 dlm for 3.4
This set includes one trivial fix, and one simple recovery
 speed up.  Directory recovery can use the standard hash table
 to find resources rather than always searching the linear
 recovery list.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.11 (GNU/Linux)
 
 iQIcBAABAgAGBQJPahBcAAoJEDgbc8f8gGmqeHEP/i288yZV8NVbIJG7XpX9JjTY
 4n4R1CI/qTMDn74GXDkk/OolHc8XTSQwbp02oFlJbPzj71lsWBUWijTAnwxiLIRz
 OHQg7eZ2aYL0YmaxAlvM2/6xLNOINmLW/DVwwH4QnpnSB4ymoCHBzyXxrNxgvgRv
 KWKUUXj7SDaUmbcK0TFZ39VprTmpw3L+mXIm+Y6kCCS2m4GfISp3Zij4OnxztA/c
 brex0R97EoZwrQOvPSRbVA5IaK6BjwfNScXAKsYCOSLsd+tvelD+UgYBdVHBTOmG
 godQ5pg8C7SpUB9NQqnLc8r78xpIUcOHQbWRqtwNQ2/6uPI/mWFj+lhpcHRmmzPk
 TczdDZVg+pIl9U+SMqiG689KgvnUTciPte0sYqksEbk3NqUMJOWOB7Cv79ZYquaV
 Pdmg788Essq7/5BmgeSRlOvS08RvdVfHXqYGOA6/tJ3f0b15M1YuSLjJdwYVWJkS
 gVmo4raN44Yh99R/+eNqeI8dvoVfd1pNDAD9VYXk4KdIv3AtKfRZi8XvWZ0o5uQI
 EdXTIhiA78ogjxG92cnnzj3+CAIpK4Iv1s53Y0KZgJ7gyExvVHyGp7zl1J7hlFLP
 jLuORsL+xMKTGbSWom796QuVn3jL/CGj/OKbnd1D98S0uRuSS6wiy/6ucBFaKmt0
 HvT7AVcX2Gh6t/qdTJ9h
 =ByvY
 -----END PGP SIGNATURE-----

Merge tag 'dlm-3.4' of git://git.kernel.org/pub/scm/linux/kernel/git/teigland/linux-dlm

Pull dlm updates for 3.4 from David Teigland:
 "This set includes one trivial fix, and one simple recovery speed up.
  Directory recovery can use the standard hash table to find resources
  rather than always searching the linear recovery list."

* tag 'dlm-3.4' of git://git.kernel.org/pub/scm/linux/kernel/git/teigland/linux-dlm:
  dlm: last element of dlm_local_addr[] never used
  dlm: fix slow rsb search in dir recovery
2012-03-21 13:54:22 -07:00