Change the memory allocation for qp_cpu_map to use the actual number of
CPUs ('nr_cpu_ids') instead of the maximum possible CPUs ('NR_CPUS').
This saves memory on systems where the maximum CPU limit is much higher
than the active CPU count.
Signed-off-by: Li RongQing <lirongqing@baidu.com>
Link: https://patch.msgid.link/20260331053245.1839-1-lirongqing@baidu.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
If device_add(&sdkp->disk_dev) fails, put_device() runs
scsi_disk_release(), which frees the scsi_disk but leaves the gendisk
referenced. The device_add_disk() error path in sd_probe() calls
put_disk(gd); call put_disk(gd) here to mirror that cleanup.
Fixes: 265dfe8ebb ("scsi: sd: Free scsi_disk device via put_device()")
Cc: stable@vger.kernel.org
Reviewed-by: John Garry <john.g.garry@oracle.com>
Signed-off-by: Yang Xiuwei <yangxiuwei@kylinos.cn>
Link: https://patch.msgid.link/20260330014952.152776-1-yangxiuwei@kylinos.cn
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The storvsc driver has become stricter in handling SRB status codes
returned by the Hyper-V host. When using Virtual Fibre Channel (vFC)
passthrough, the host may return SRB_STATUS_DATA_OVERRUN for
PERSISTENT_RESERVE_IN commands if the allocation length in the CDB does
not match the host's expected response size.
Currently, this status is treated as a fatal error, propagating
Host_status=0x07 [DID_ERROR] to the SCSI mid-layer. This causes
userspace storage utilities (such as sg_persist) to fail with transport
errors, even when the host has actually returned the requested
reservation data in the buffer.
Refactor the existing command-specific workarounds into a new helper
function, storvsc_host_mishandles_cmd(), and add PERSISTENT_RESERVE_IN
to the list of commands where SRB status errors should be suppressed for
vFC devices. This ensures that the SCSI mid-layer processes the returned
data buffer instead of terminating the command.
Signed-off-by: Li Tian <litian@redhat.com>
Reviewed-by: Long Li <longli@microsoft.com>
Reviewed-by: Laurence Oberman <loberman@redhat.com>
Link: https://patch.msgid.link/20260406015344.12566-1-litian@redhat.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
As far as I can tell, CRYPTO_MD5 has been unnecessary here ever since it
was added by commit c899e4ef96 ("[SCSI] open-iscsi/linux-iscsi-5
Initiator: Kconfig update") in 2005.
CRYPTO was needed until commit 92186c1455 ("scsi: iscsi_tcp: Switch to
using the crc32c library"), but is no longer needed.
Remove these unnecessary kconfig selections.
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Link: https://patch.msgid.link/20260404203003.33738-1-ebiggers@kernel.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Justin Tee <justintee8345@gmail.com> says:
Update lpfc to revision 15.0.0.0
This patch set adds support for the G8 ASIC found on the LPe42100
series adapter models.
Updates are made to irq affinity assignment, mailbox command handling
related to initialization, SGL construction, firmware download
diagnostics, and the removal of an outdated performance feature. We
also add 128G link speed selection and support.
The patches were cut against Martin's 7.1/scsi-queue tree.
Link: https://patch.msgid.link/20260331205928.119833-1-justintee8345@gmail.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Update supported pci_device_id table to include the values for the G8 ASIC
Device ID utilized by LPe42100 series of adapters. The default reporting
string will be "LPe42100".
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Link: https://patch.msgid.link/20260331205928.119833-10-justintee8345@gmail.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
128G link speed selection and support is added for various mailbox
commands, defines, and ACQE handling. The default behavior to
autonegotiate supported link speed remains the same.
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Link: https://patch.msgid.link/20260331205928.119833-9-justintee8345@gmail.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
When WRITE_OBJECT mailbox command fails during firmware update, the
lpfc_log_write_firmware_error() routine is used to log and parse commonly
found error codes. Update this routine to also include ASIC_ID register
checks for notifying users of incompatible images.
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Link: https://patch.msgid.link/20260331205928.119833-8-justintee8345@gmail.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The construction of SGLs is updated to safeguard ASIC boundary requirements
when using XPSGL.
The LSP type SGE is used to notify where a continuing SGL resides.
Typically, this means that the LSP is the last SGE in an SGL because the
current SGL has reached its maximum size and the LSP is used to refer to
the next follow up SGL. Due to ASIC boundary requirements, there is a need
to ensure a 4 KB boundary is not crossed. Thus, for a maximum size of 256
byte SGLs or 16 SGEs, this means restricting the LSP to being the 12th SGE
for the very first SGL that is used for pre-registration. If additional
SGEs are needed, the LSP will be the last SGE position within that follow
up SGL as was previously implemented.
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Link: https://patch.msgid.link/20260331205928.119833-7-justintee8345@gmail.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The PBDE feature is no longer supported and its related fields are removed
in this patch. There are no expected side effects with regards to existing
functionality.
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Link: https://patch.msgid.link/20260331205928.119833-6-justintee8345@gmail.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
If lpfc_issue_reg_vfi() returns an error in lpfc_rcv_plogi(), then
execution of lpfc_rcv_plogi() continues and lpfc_reg_rpi() is called, which
allocates an mbuf. When this REG_RPI mailbox is issued, it inevitably
fails because the VFI is not registered. However, the REG_RPI failure does
not free the mbuf that was allocated in lpfc_reg_rpi() because there is no
check for mbox error status in lpfc_defer_plogi_acc().
Fix by adding a check in lpfc_rcv_plogi() if lpfc_reg_vfi() fails, then
exit early. Also, add mailbox status check in lpfc_defer_plogi_acc to
enter the REG_RPI mbox_cmpl functions and free the allocated mbuf.
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Link: https://patch.msgid.link/20260331205928.119833-5-justintee8345@gmail.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Update log message to display the entirety of an MCQE for which there is no
submission context. This log message is not expected to occur and hence is
tagged as a LOG_TRACE_EVENT. As such, move the hbalock release to before
this log message so that the trace event process does not hold the hbalock
for too long.
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Link: https://patch.msgid.link/20260331205928.119833-4-justintee8345@gmail.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
When specifying rq version, it is preferred to refer to SLI4 interface type
instead of the get_sli4_parameters mailbox command response. If SLI4
if_type is 2 or above, then the newer version 1 is used for rq_create
mailbox commands. Otherwise, version 0 is used and is meant for older
adapters.
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Link: https://patch.msgid.link/20260331205928.119833-3-justintee8345@gmail.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The purpose of the lpfc_next_online_cpu() call is to save the CPU index for
the next iteration of the for (index = 0; index < vectors; index++) loop.
Because we’ve reached the last iteration of the loop, cpumask_next(cpu,
aff_mask) returns nr_cpu_ids. Thus, if we already know we've reached the
last iteration of the IRQ affinity assignment loop, then we can just break
and exit.
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Link: https://patch.msgid.link/20260331205928.119833-2-justintee8345@gmail.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Fix the following compiler warnings:
aicasm_gram.y:1107:24: warning: comparison of different enumeration types
('scope_type' and 'enum yytokentype') [-Wenum-compare]
1107 | || last_scope->type == T_ELSE) {
| ~~~~~~~~~~~~~~~~ ^ ~~~~~~
aicasm_scan.l:392:14: warning: using the result of an assignment as a condition
without parentheses [-Wparentheses]
392 | while (c = *yptr++) {
| ~~^~~~~~~~~
aicasm_macro_scan.l:153:1: warning: non-void function does not return a value
[-Wreturn-type]
153 | }
| ^
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://patch.msgid.link/20260402153341.2909184-1-bvanassche@acm.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
hpsa formats the controller name into h->devname[8] and derives
interrupt names from it in h->intrname[][16]. Once host_no reaches four
digits, "hpsa%d" no longer fits in devname, and the derived IRQ names
can then overrun the interrupt-name buffers as well.
The previous fix switched these builders to bounded formatting, but that
would truncate user-visible controller and IRQ names. Keep the existing
names intact instead by enlarging the fixed buffers to cover the current
formatted strings.
Fixes: 2946e82bdd ("hpsa: use scsi host_no as hpsa controller number")
Fixes: 8b47004a55 ("hpsa: add interrupt number to /proc/interrupts interrupt name")
Acked-by: Don Brace <don.brace@microchip.com>
Signed-off-by: Pengpeng Hou <pengpeng@iscas.ac.cn>
Link: https://patch.msgid.link/20260401120552.78541-1-pengpeng@iscas.ac.cn
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Enhance the IOC shutdown process to handle transient failures during
controller cleanup. Add retry logic with configurable maximum retry
count (MPI3MR_MAX_SHUTDOWN_RETRY_COUNT) and proper timeout management
that resets on each retry attempt. This ensures shutdown can recover
from temporary issues without failing completely.
Signed-off-by: Ranjan Kumar <ranjan.kumar@broadcom.com>
Link: https://patch.msgid.link/20260320090326.47544-4-ranjan.kumar@broadcom.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Track queue-full conditions on operational request queues in the driver.
Record the last host tag returned to the SCSI mid-layer and count I/Os
affected by queue-full conditions.
Signed-off-by: Ranjan Kumar <ranjan.kumar@broadcom.com>
Link: https://patch.msgid.link/20260320090326.47544-3-ranjan.kumar@broadcom.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Operational replies without a valid scsi_cmnd indicate an invalid I/O
completion and a potentially inconsistent controller state. Track this
condition and allow the watchdog to trigger a soft reset to safely
recover.
Signed-off-by: Ranjan Kumar <ranjan.kumar@broadcom.com>
Link: https://patch.msgid.link/20260320090326.47544-2-ranjan.kumar@broadcom.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The function iscsi_conn_set_callbacks() was renamed to
iscsi_sw_tcp_conn_set_callbacks() by commit 38e1a8f547 ("[SCSI]
iscsi_tcp: hook iscsi_tcp into new libiscsi_tcp module"). Update the
stale reference in iscsi_sw_tcp_conn_restore_callbacks().
Assisted-by: unnamed:deepseek-v3.2 coccinelle
Signed-off-by: Kexin Sun <kexinsun@smail.nju.edu.cn>
Link: https://patch.msgid.link/20260321105904.7726-1-kexinsun@smail.nju.edu.cn
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The function lpfc_freenode() was renamed to lpfc_cleanup_node() by
commit 685f0bf7af ("[SCSI] lpfc 8.1.12 : Collapse discovery lists to a
single node list"), and commit a70e63eee1 ("scsi: lpfc: Fix NPIV
Fabric Node reference counting") later removed the lpfc_unreg_rpi() call
from lpfc_cleanup_node().
Remove the now-inaccurate "called from lpfc_freenode()" sentence and
reflow the remaining comment text for lpfc_unreg_rpi().
Assisted-by: unnamed:deepseek-v3.2 coccinelle
Signed-off-by: Kexin Sun <kexinsun@smail.nju.edu.cn>
Link: https://patch.msgid.link/20260321105909.7804-1-kexinsun@smail.nju.edu.cn
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The event_list processes non-hotplug events (such as LUN capacity
changes), so remove the conditions that guard the initial kicks in
_probe() and _restore(), as well as the work cancellation in _remove().
Suggested-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Joshua Daley <jdaley@linux.ibm.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Link: https://patch.msgid.link/20260325180857.3675854-3-jdaley@linux.ibm.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The last step of virtscsi_handle_event() is to call
virtscsi_kick_event(), which calls INIT_WORK on its own work
item. INIT_WORK resets the work item's data bits to 0.
If this occurs while the work item is being flushed by
cancel_work_sync(), then kernel/workqueue.c/work_offqd_enable triggers a
kernel warning, as it expects the "disable" bit to be 1:
[ 21.450115] workqueue: work disable count underflowed
[ 21.450117] WARNING: CPU: 1 PID: 56 at kernel/workqueue.c:4328 enable_work+0x10a/0x120
...
[ 21.450171] Call Trace:
[ 21.450173] [<000003db2e5bdc3e>] enable_work+0x10e/0x120
[ 21.450176] ([<000003db2e5bdc3a>] enable_work+0x10a/0x120)
[ 21.450178] [<000003db2e5bdd86>] cancel_work_sync+0x86/0xa0
[ 21.450181] [<000003daae97d9e4>] virtscsi_remove+0xb4/0xd0 [virtio_scsi]
[ 21.450184] [<000003db2ef3b5ca>] virtio_dev_remove+0x6a/0xd0
[ 21.450186] [<000003db2ef9106c>] device_release_driver_internal+0x1ac/0x260
[ 21.450190] [<000003db2ef8edc8>] bus_remove_device+0xf8/0x190
[ 21.450192] [<000003db2ef88d72>] device_del+0x142/0x340
[ 21.450194] [<000003db2ef88fa0>] device_unregister+0x30/0xa0
[ 21.450196] [<000003db2ef3b2fa>] unregister_virtio_device+0x2a/0x40
This warning may occur if a controller is detached immediately following
a disk detach.
Move the INIT_WORK call to prevent this. Don't re-init event list work
items in virtscsi_kick_event(), init them only once in virtscsi_probe()
instead.
Signed-off-by: Joshua Daley <jdaley@linux.ibm.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Link: https://patch.msgid.link/20260325180857.3675854-2-jdaley@linux.ibm.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
clang-22 started warning about functions that take printf format
strings:
drivers/scsi/esas2r/esas2r_log.c:160:50: error: diagnostic behavior may be improved by adding the 'format(printf, 3, 0)' attribute to the declaration of 'esas2r_log_master' [-Werror,-Wmissing-format-attribute]
121 | retval = vsnprintf(buffer, buflen, format, args);
| ^
drivers/scsi/esas2r/esas2r_log.c:121:12: note: 'esas2r_log_master' declared here
121 | static int esas2r_log_master(const long level,
| ^
The warning already got silenced for gcc but not clang in the past.
Rather than modify that hack to turn it off for both, just add the
attribute as suggested and remove the pragma again.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Link: https://patch.msgid.link/20260323100027.1975646-1-arnd@kernel.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
After commit 37c4e72b06 ("scsi: Fix sas_user_scan() to handle wildcard
and multi-channel scans"), if the device supports multiple channels (0 to
shost->max_channel), user_scan() invokes updated sas_user_scan() to perform
the scan behavior for a specific transfer. However, when the user
specifies shost->max_channel, it will return -EINVAL, which is not
expected.
Fix and support specifying the scan shost->max_channel for scanning.
Fixes: 37c4e72b06 ("scsi: Fix sas_user_scan() to handle wildcard and multi-channel scans")
Signed-off-by: Yihang Li <liyihang9@huawei.com>
Reviewed-by: John Garry <john.g.garry@oracle.com>
Link: https://patch.msgid.link/20260317063147.2182562-1-liyihang9@huawei.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
lpfc_cgn_calc_crc32(data, size, crc) is really just an open-coded version
of ~crc32c(bitrev32(crc), data, size). However, all callers pass crc ==
~0, so it can be simplified even further to just ~crc32c(~0, data, size).
Remove the crc argument and implement it that way.
While we're at it, also use proper types in the function prototype.
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Link: https://patch.msgid.link/20260316223631.72361-1-ebiggers@kernel.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
A malicious or compromised VIO server can return a num_written value in the
discover targets MAD response that exceeds max_targets. This value is
stored directly in vhost->num_targets without validation, and is then used
as the loop bound in ibmvfc_alloc_targets() to index into disc_buf[], which
is only allocated for max_targets entries. Indices at or beyond max_targets
access kernel memory outside the DMA-coherent allocation. The
out-of-bounds data is subsequently embedded in Implicit Logout and PLOGI
MADs that are sent back to the VIO server, leaking kernel memory.
Fix by clamping num_written to max_targets before storing it.
Fixes: 072b91f9c6 ("[SCSI] ibmvfc: IBM Power Virtual Fibre Channel Adapter Client Driver")
Reported-by: Yuhao Jiang <danisjiang@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: Tyllis Xu <LivelyCarpet87@gmail.com>
Reviewed-by: Dave Marquardt <davemarq@linux.ibm.com>
Acked-by: Tyrel Datwyler <tyreld@linux.ibm.com>
Link: https://patch.msgid.link/20260314170151.548614-1-LivelyCarpet87@gmail.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
ses_recv_diag() can return a positive value, which also means that an
error happened, so do not only test for negative values.
Cc: James E.J. Bottomley <James.Bottomley@HansenPartnership.com>
Cc: Martin K. Petersen <martin.petersen@oracle.com>
Cc: stable <stable@kernel.org>
Assisted-by: gkh_clanker_2000
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Link: https://patch.msgid.link/2026022301-bony-overstock-a07f@gregkh
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
MPI firmware state was returned as 0. Get MPI FW state to proceed with
flash image validation.
A new sysfs node 'mpi_fw_state' is added to report MPI firmware state:
/sys/class/scsi_host/hostXX/mpi_fw_state
Fixes: d74181ca11 ("scsi: qla2xxx: Add bsg interface to support firmware img validation")
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Link: https://patch.msgid.link/20260305093337.2007205-1-njavali@marvell.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
In qla24xx_els_dcmd_iocb() sp->free is set to qla2x00_els_dcmd_sp_free().
When an error happens, this function is called by qla2x00_sp_release(),
when kref_put() releases the first and the last reference.
qla2x00_els_dcmd_sp_free() frees fcport by calling qla2x00_free_fcport().
Doing it one more time after kref_put() is a bad idea.
Fixes: 82f522ae0d ("scsi: qla2xxx: Fix double free of fcport")
Fixes: 4895009c4b ("scsi: qla2xxx: Prevent command send on chip reset")
Signed-off-by: Vladimir Riabchun <ferr.lambarginio@gmail.com>
Signed-off-by: Farhat Abbas <fabbas@cloudlinux.com>
Link: https://patch.msgid.link/aYsDln9NFQQsPDgg@vova-pc
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Previously, host_lock was used to prevent bit-set conflicts in async_scan,
but this approach introduced naked reads in some code paths.
Convert async_scan from a bitfield to a bool type to eliminate bit-level
conflicts entirely. Use __guarded_by(&scan_mutex) to indicate that the
async_scan variable is protected by scan_mutex.
Signed-off-by: Chaohai Chen <wdhh6@aliyun.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: John Garry <john.g.garry@oracle.com>
Link: https://patch.msgid.link/20260305025125.3649517-1-wdhh6@aliyun.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
After scsi_sysfs_device_initialize() was called, error paths must call
__scsi_remove_device().
Fixes: 1ac22c8eae ("scsi: core: Fix refcount leak for tagset_refcnt")
Cc: stable@vger.kernel.org
Signed-off-by: Junxiao Bi <junxiao.bi@oracle.com>
Reviewed-by: John Garry <john.g.garry@oracle.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Link: https://patch.msgid.link/20260304164603.51528-1-junxiao.bi@oracle.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The following patches made over Linus's current tree allow users to
tell the target layer to perform direct completions instead of always
deferring to LIO's completion workqueue. When the frontend driver
already has multiple worker threads (or you are doing a LUN per target
with a single thread per target) then bypassing the LIO workqueue can
increase performance 20-30%.
Link: https://patch.msgid.link/20260222232946.7637-1-michael.christie@oracle.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
This has us use the driver's completion preference by default. There is
no behavior changes with this patch and we queue completion to LIO's
completion workqueue by default.
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Link: https://patch.msgid.link/20260222232946.7637-3-michael.christie@oracle.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The WRITE SAME(16) and WRITE SAME(10) SCSI commands use a page from a
dedicated mempool (sd_page_pool) for their payload. This pool was
initialized to allocate single pages, which was sufficient as long as the
device sector size did not exceed the PAGE_SIZE.
Given that block layer now supports block size upto 64KB, i.e. beyond
PAGE_SIZE, initialize a large page pool in sd_probe() if a higher sector
device is attached, ensuring atomicity. Adapt sd_set_special_bvec() to use
large page pool when a higher sector size device is attached. Hence enable
sector sizes > PAGE_SIZE in SCSI sd driver.
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Signed-off-by: Swarna Prabhu <s.prabhu@samsung.com>
Co-developed-by: Pankaj Raghav <p.raghav@samsung.com>
Signed-off-by: Pankaj Raghav <p.raghav@samsung.com>
Link: https://patch.msgid.link/20260219043741.276729-2-sw.prabhu6@gmail.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
These deprecated sysctl has been broken since commit 26d1c80fd6
("scsi/sg: move sg-big-buff sysctl to scsi/sg.c") and nobody has found
this. I believe it's time to remove it, which will allow us to clean up a
significant amount of code.
Signed-off-by: Yang Erkun <yangerkun@huawei.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Link: https://patch.msgid.link/20260127062044.3034148-4-yangerkun@huawei.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The parameter def_reserved_size defines the default buffer size reserved
for each Sg_fd and should be restricted to a range between 0 and 1,048,576
(see https://tldp.org/HOWTO/SCSI-Generic-HOWTO/proc.html). Although the
function sg_proc_write_dressz enforces this limit, it is possible to bypass
it by directly modifying the module parameter as shown below, which then
causes a soft lockup:
echo -1 > /sys/module/sg/parameters/def_reserved_size
exec 4<> /dev/sg0
watchdog: BUG: soft lockup - CPU#5 stuck for 26 seconds! [bash:537]
Modules loaded:
CPU: 5 UID: 0 PID: 537 Command: bash, kernel version 6.19.0-rc3+ #134,
PREEMPT disabled
Hardware: QEMU Standard PC (i440FX + PIIX, 1996), BIOS version
1.16.1-2.fc37 dated 04/01/2014
...
Call Trace:
sg_build_reserve+0x5c/0xa0
sg_add_sfp+0x168/0x270
sg_open+0x16e/0x340
chrdev_open+0xbe/0x230
do_dentry_open+0x175/0x480
vfs_open+0x34/0xf0
do_open+0x265/0x3d0
path_openat+0x110/0x290
do_filp_open+0xc3/0x170
do_sys_openat2+0x71/0xe0
__x64_sys_openat+0x6d/0xa0
do_syscall_64+0x62/0x310
entry_SYSCALL_64_after_hwframe+0x76/0x7e
The fix is to use module_param_cb to validate and reject invalid values
assigned to def_reserved_size.
Fixes: 6460e75a10 ("[SCSI] sg: fixes for large page_size")
Signed-off-by: Yang Erkun <yangerkun@huawei.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Link: https://patch.msgid.link/20260127062044.3034148-3-yangerkun@huawei.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Commit 26d1c80fd6 ("scsi/sg: move sg-big-buff sysctl to scsi/sg.c") made
a mistake. sysctl sg-big-buff was not created because the call to
register_sg_sysctls() was placed on the wrong code path.
Fixes: 26d1c80fd6 ("scsi/sg: move sg-big-buff sysctl to scsi/sg.c")
Signed-off-by: Yang Erkun <yangerkun@huawei.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Link: https://patch.msgid.link/20260127062044.3034148-2-yangerkun@huawei.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Add a 'serial' sysfs attribute for SCSI and SATA devices. This attribute
exposes the Unit Serial Number, which is derived from the Device
Identification Vital Product Data (VPD) page 0x80.
Whitespace is stripped from the retrieved serial number to handle the
different alignment (right-aligned for SCSI, potentially left-aligned for
SATA). As noted in SAT-5 10.5.3, "Although SPC-5 defines the PRODUCT SERIAL
NUMBER field as right-aligned, ACS-5 does not require its SERIAL NUMBER
field to be right-aligned. Therefore, right-alignment of the PRODUCT SERIAL
NUMBER field for the translation is not assured."
This attribute is used by tools such as lsblk to display the serial number
of block devices.
[mkp: length adjustment]
Signed-off-by: Igor Pylypiv <ipylypiv@google.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Link: https://patch.msgid.link/20260209212151.342151-1-ipylypiv@google.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The Iomega ZIP 100 (Z100P2) can't process IO Advice Hints Grouping mode
page query. It immediately switches to the status phase 0xb8 after
receiving the subpage code 0x05 of MODE_SENSE_10 command, which fails
imm_out() and turns into DID_ERROR of this command, which leads to unusable
device. This was tested with an Iomega ZIP 100 (Z100P2) connected with a
StarTech PEX1P2 AX99100 PCIe parallel port card.
Prior to this fix, Test Unit Ready fails and the drive can't be used:
IMM: returned SCSI status b8
sd 7:0:6:0: [sdh] Test Unit Ready failed: Result: hostbyte=0x01 driverbyte=DRIVER_OK
Signed-off-by: Florian Fuchs <fuchsfl@gmail.com>
Link: https://patch.msgid.link/20260227181823.892932-1-fuchsfl@gmail.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The driver retains reset history even after the IOC has successfully
reached the READY state. That leaves stale reset information active during
normal operation and can mislead recovery and diagnostics. In addition, if
the IOC becomes READY just as the ready timeout loop exits, the driver
still follows the failure path and may retry or report failure incorrectly.
Clear reset history once READY is confirmed so driver state matches actual
IOC status. After the timeout loop, recheck the IOC state and treat READY
as success instead of failing.
Signed-off-by: Ranjan Kumar <ranjan.kumar@broadcom.com>
Link: https://patch.msgid.link/20260225082622.82588-1-ranjan.kumar@broadcom.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Avoid all kernel-doc warnings in lpfc.h:
- Use the correct function parameter name
- Add a '*' to a kernel-doc line
- Repair the function Returns: comments
Fixes these warnings:
Warning: drivers/scsi/lpfc/lpfc.h:1674 No description found for return
value of 'lpfc_next_online_cpu'
Warning: drivers/scsi/lpfc/lpfc.h:1686 No description found for return
value of 'lpfc_next_present_cpu'
Warning: drivers/scsi/lpfc/lpfc.h:1700 function parameter 'eq' not
described in 'lpfc_sli4_mod_hba_eq_delay'
Warning: drivers/scsi/lpfc/lpfc.h:1755 bad line: --------------------------
Warning: drivers/scsi/lpfc/lpfc.h:1759 No description found for return
value of 'lpfc_is_vmid_enabled'
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reviewed-by: Justin Tee <justin.tee@broadcom.com>
Link: https://patch.msgid.link/20260224234954.3606638-1-rdunlap@infradead.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
This leak will cause a hang when tearing down the SCSI host. For example,
iscsid hangs with the following call trace:
[130120.652718] scsi_alloc_sdev: Allocation failure during SCSI scanning, some SCSI devices might not be configured
PID: 2528 TASK: ffff9d0408974e00 CPU: 3 COMMAND: "iscsid"
#0 [ffffb5b9c134b9e0] __schedule at ffffffff860657d4
#1 [ffffb5b9c134ba28] schedule at ffffffff86065c6f
#2 [ffffb5b9c134ba40] schedule_timeout at ffffffff86069fb0
#3 [ffffb5b9c134bab0] __wait_for_common at ffffffff8606674f
#4 [ffffb5b9c134bb10] scsi_remove_host at ffffffff85bfe84b
#5 [ffffb5b9c134bb30] iscsi_sw_tcp_session_destroy at ffffffffc03031c4 [iscsi_tcp]
#6 [ffffb5b9c134bb48] iscsi_if_recv_msg at ffffffffc0292692 [scsi_transport_iscsi]
#7 [ffffb5b9c134bb98] iscsi_if_rx at ffffffffc02929c2 [scsi_transport_iscsi]
#8 [ffffb5b9c134bbf0] netlink_unicast at ffffffff85e551d6
#9 [ffffb5b9c134bc38] netlink_sendmsg at ffffffff85e554ef
Fixes: 8fe4ce5836 ("scsi: core: Fix a use-after-free")
Cc: stable@vger.kernel.org
Signed-off-by: Junxiao Bi <junxiao.bi@oracle.com>
Reviewed-by: Mike Christie <michael.christie@oracle.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Link: https://patch.msgid.link/20260223232728.93350-1-junxiao.bi@oracle.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>